Commit Graph

162 Commits

Author SHA1 Message Date
kendo
6faf4bd7f5 Add a sprint button: a setting that makes Link sprint without rolling first, as a toggle or while held. 2026-11-12 22:54:58 -05:00
chrg6
2571e180c8 Check the texture pool's set against the device's descriptor limits, and name the slot a carried translation reads.
The larger pool asks for 655,360 sampled images in one set where 524,288 were asked before. The start now logs the
device's limits for one set and one stage next to that count, warns when the count is over them, and a refused
layout ends the start with the limits named instead of a bare failure.

The log line for a slot registered past the pool names both slots a shader reads instead: the pool's last entry, and
the last of the old length for a translation carried over from the translator before. The comments say what they say
without an issue number.

The translator's identity changes with this pool size: after the update every install translates its shaders again
in the background, the earlier translations serve meanwhile, and a shader gets the ground fix once it is translated.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 22:46:24 -05:00
Leyukaka
2388f1f581 Give the texture pool room for Ocarina's 33068 descriptors instead of 32768.
The game makes a texture pool of 33068 descriptors, and the translator clamped every pool handle to 32767, so the textures registered from 32768 up were drawn with whatever slot 32767 held, often an empty image: ground went see-through after an area load until the area was loaded again. VK_POOL_TEX and the translator's TexturePoolLength go to 40960, and a slot registered past it is logged once.
2026-11-12 22:45:06 -05:00
chrg6
1a206434e0 Build the mesh pipelines' stage libraries ahead of their draws, at the preparation and at boot.
The preparation and the boot build the stage libraries of single shaders. A mesh pipeline's pre-rasterization
library needs its mesh stage and its task stage together, and its fragment shader library depends on what that mesh
stage leaves unwritten, so only a pipeline record names what they are made of.

Every listed mesh pipeline the preparation builds and every recorded one the boot queues now notes its two shader
libraries, each key once. The preparation builds them on every core after the listed pipelines and before the
pipeline cache is saved, inside the marker that covers a driver dying on a listed pipeline. The boot builds them on
one thread at idle priority beside the game, behind the memory gate, with the rest of the library prebuild
(lib_prebuild = 0 leaves it out). Each is destroyed once built, which leaves it in the pipeline caches and the
driver's own, as for the single shaders' libraries.

A mesh pipeline of known stages that a draw meets with other targets, another blend state or sample count then finds
its libraries in the caches and is linked, where it was compiled whole. The recorded and listed mesh pipelines are
still built whole ahead of play, also on a machine that leaves the rest of the shared list to its first draw.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:31:13 -05:00
chrg6
0b974d04f1 Carry an execution profile in a launcher release.
make_launcher.py --pgo FILE puts the profile and its record into app/<version>/data, where make_game.py looks for it,
before the prebuilt runtime is built, so the runtime library is compiled with it. The profile is part of the app zip
the update feed serves, so the build after an update compiles with it. The release stops before it downloads or
builds anything when the record names another recomp/ than the checkout's, and after the runtime library when the
release's compiler, the one players build with, left the profile out.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:30:46 -05:00
chrg6
2ede7101fa Build game 1.1.1 with the kit's execution profile, and make its instrumented build.
tools/make_game.py, the build players run through the launcher, read no profile: only tools/build_game.py did, which
does not build 1.1.1. A kit with data/pgo-v111.profdata (build/pgo/ in a checkout) now compiles the lifted code at -O2
with it and the runtime too, the prebuilt runtime library included. The profile is left out, and every command and
key is what it was, when the kit has none, when its record names another recomp/ than the kit's, when a compiler of
the build refuses the file in one trial compile before the others start, and with NX2NAVI_PGO=off. The record holds
recomp/ by content, which a kit without git can compare. The object keys hold the profile's content and not the kit's
folder, so a launcher update that moves the kit keeps the objects.

--pgo gen (NX2NAVI_PGO=gen from a launcher) builds the instrumented game into the game folder: it counts into
<out>/pgo, records what it was built from for the merge, and stops at once when the build tools lack the profile
runtime. tools/pgo.py merge takes that record, refuses a game built from another recomp/ and finds llvm-profdata in an
MSYS2 folder too. tools/check_content.py refuses profiles in a commit.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:30:46 -05:00
chrg6
26f3dc47ec Show the low-end GPU mode's settings under its switch in the Game tab, and read them only while the mode is on.
The settings had a tab of their own; they are rows of the Game tab now, listed under the switch once the mode is on after a restart, and the tab is gone. With the mode off every one of them reads as unset, whatever nx2navi.ini or the environment says, so nothing of the mode acts unless a player turned it on; the build reads guest_opt the same way. The notes describe that, and take the white edges in towns and the dropped textures from the known issues to the fixes.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 13:59:43 -05:00
chrg6
0533b3028e Keep the asynchronous replay, the hot-pool rule and the -O2 game code off unless a player turns them on.
The three change what every card does: the asynchronous replay can show a dark or flickering frame now and then, the hot-pool rule moves pools into system memory on every discrete card, and -O2 makes each rebuild of the game several times longer. Their rows stay in the settings tab. The USB joystick mapping is described by the device's own name, and the tab's introduction says what its settings are for.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:17:55 -05:00
chrg6
a464ffafbc Merge Tobim6's work for older graphics cards: mesh shaders emulated with compute, video memory kept within the heaps' budgets, staged mirror uploads and the submit wait that goes with them.
Conflicts: the settings key lists take both sides; frame generation keeps the camera-cut handling and logs its counters every 600 frames with the cuts among them; the pass-time mark moves into draw_viewport; mo_desc keeps the pose depth and notes the reader.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:14:58 -05:00
DeepDaddyTTV
d577f8c325 Save the build state before the source generation starts, so a generation cut short after it wrote layout.json runs again on the next try instead of being taken as done.
After Keep Build Cache removed the generated sources and the kit was updated, the lift ran because layout.json was
gone while its key still matched. An interruption after layout.json was back left the saved state calling the lift
complete, and the next run compiled unfinished sources. The pull request's two commits (one a merge of main) are
applied here as their net change.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 10:38:55 -05:00
Tobim6
0b4fdac38d Defaults from the RX 580 runs: asynchronous replay, mesh emulation, mirror_hot 25, freeze_idle 1200, native zstd, game code at -O2; freeze and zstd and replay rows in the Lama patches tab.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 16:22:57 +01:00
Tobim6
9259149527 Settings menu: a Lama patches tab with the settings of the RX 580 patches
Released textures kept, top texture levels left out, hot pools in system memory, the heap limit, the upload batch
limit, the kept ASTC buffer, mesh emulation and its arena and task records (greyed where the GPU has mesh shaders),
the overwritten-texture fix, the vector index fix, -O2 game code, pass times and the frame dump key. Each key gets a
row in the settings table; make_game.py reads guest_opt from nx2navi.ini when the environment does not set it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 16:22:31 +01:00
Tobim6
68c259c7b3 make_game.py: the build log says when the lifted code is built at -O2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 16:22:27 +01:00
Tobim6
8913ce1736 make_game.py: NX2NAVI_GUEST_OPT=2 builds the lifted code at -O2.
With the lifted code built for the CPU's level, a profile on an RX 580 PC (Haswell-class CPU) has two game threads
running it nearly all the time and the replay thread idle a quarter of the time: the game's own code bounds the frame.
The lifted code is built at -O1 for build time; the environment variable NX2NAVI_GUEST_OPT=2 builds it at -O2 for a
player who will wait for the longer build. Part of each object's key, so changing it rebuilds the lifted code.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 16:22:01 +01:00
Tobim6
e576c6b1df make_game.py: write nx2navi.map next to the exe, without the lifted functions.
A NX2NAVI_PROFILE profile names Rips; tools/prof_report.py needs the link map to name them, and the launcher's build
wrote none. The link now writes the map and keeps its non-lifted lines (the runtime, libraries; the f_<hex> game
functions are hundreds of MiB of it) as nx2navi.map in the game folder. The link key changes once, so the next build
links again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 16:21:58 +01:00
chrg6
ef3466ce4f Merge main into the 0.9.1 release: the launcher's Mods screen, the anti-aliasing choices beside FSR and DLSS, and the scene's last row and column filled before an upscaler reads it.
The 0.9.1 notes keep the release branch's text and take main's sections: New, the edge line under Fixed, and Changed.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 09:00:37 -05:00
chrg6
9f7c8ae810 Wait 8 ms once for a pipeline met for the first time, and carry the compute variants in the pipeline list.
A draw that met a new pipeline waited 3 ms for its fast link, in every frame, which is just under what the link takes with the stage libraries in the driver's cache: in a first-visit session on a new install 66 of 87 such draws gave up at the end of the wait and their frame was held back. The wait is now 8 ms for each pipeline, counted from its first miss and shared by all its draws, and 16 ms for a frame, so a pipeline the driver has to compile costs one frame the wait and the frames after it nothing.

The pipeline list tool also takes the compute variants a game folder dispatched, which no pipeline record names and which were translated in the middle of play, and reads a list made before as one of its inputs.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 08:25:42 -05:00
epicmeme546
89c453d7bb Add a Mods screen to the launcher and build the mods' code patches into the launcher's game.
Mods, on the home screen, opens the game's mods folder, adds a downloaded mod from its .zip, .7z or .rar file or its
folder, switches each mod on or off, and sets the load order (mods_disabled and mods_order in nx2navi.ini, written as
the game writes them). Each mod's description says what it changes, which other mod changes the same files and which
of the two wins, and why the game leaves it off when it does.

Before the game starts, Play puts the mods folder in order (launcher/mods.py prepare): an archive in it is unpacked into
a folder of its name and kept, a mod whose files sit a folder or more down has them moved up, and a romfs, exefs or
cheats folder put straight into the mods folder becomes a mod of its own. An archive that would write outside its
folder is refused, and nothing is deleted.

The launcher's build (tools/make_game.py) left the mods' code cheats and ExeFS patch files out, so those mods stayed
off. The lift now turns them into patch sets first, as the setup does, with the files in the lift's key and
build-cache/mod-code.json recording what it took up. Play builds the game again before it starts when an enabled mod
brings code no build has seen. The shaders' key names the lift and the compile without the mods' code, so such a build
compiles only what the patches change and leaves the shaders prepared. tools/mod_files.py is the one place the tools,
the build and the launcher find a mod's parts.

Tested: a zipped mod holding its own folder, put into a mods folder, was unpacked and moved up by the launcher's code,
and the game served its file in place of the game's. The lifter took a code cheat and a pchtxt patch made for the game's
main as patch sets. The launcher's and the setup's tests pass.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 08:11:57 -05:00
ChurchOfIlias
37e8e6dbda Guard water absorption distance alongside paired coordinates
Add the exact-material nonnegative distance guard and the recorded NVIDIA translation profiles. Keep generated shaders and the private native patcher out of the repository. Document reported cross-vendor testing and the unresolved origin of invalid absorption distance.
2026-11-12 06:34:27 -05:00
ChurchOfIlias
d0d0112c3a Add an opt-in paired projective coordinate correction for water
Carry clip coordinates through perspective interpolation for the identified water shader pair. Keep generated modules private and document the observed results and remaining portability limits.
2026-11-12 06:34:27 -05:00
chrg6
6ccd1e224d Build the shared pipeline list before play on every start, and build every listed pipeline at install.
A new install met every pipeline in play: in Hyrule Field one 600-frame stretch of a first visit had 1,769 draws wait 461 ms in all for pipelines, the longest frame 88 ms. The boot now reads seed-pipeline-keys.bin, the release's list, as recorded pipelines after the install's own (keys_open_seed, NX2NAVI_PIPE_SEED, default 1): their pairs go into the vertex output unions and the prewarm builds them as it builds the install's. The preparation builds every listed pipeline (NX2NAVI_PREPARE_PIPELINES now defaults to all), with the unions of the same list, so the first boot of a new install finds them in the caches. The list's mesh pipelines are left out at the boot on a GPU without mesh shaders, as the preparation leaves them out. Nothing of the list goes into pipeline-keys.bin.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 06:19:39 -05:00
chrg6
f39e5930d1 Count the whole register range of 64- and 128-bit loads and stores when the lowering places its uniform registers.
The SM86 lowering keeps the uniform registers in the general registers after the highest one the program uses
(HighestGpr), with one spare so pairs stay aligned. The scan read the register fields as single registers, so a
128-bit load or store whose upper registers the program names nowhere else (LDG, LDS, LDL and STG, STS, STL with size
6) left Rd+2 and Rd+3 to UR0 and UR1, and the load overwrote them. The scan now counts Rd..Rd+3 (Rd..Rd+1 for 64 bits)
of these forms. An overestimate only moves the uniform registers up.

Checked: no translation changes in the game's 520 task and mesh programs, its 4,238 NVN2 compute programs, or the
2,450 vertex and fragment programs whose stored input id starts with 0, all from an installed shader cache, and all
pass spirv-val (vulkan1.3): the case does not occur in what this game version has shown so far.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 19:38:18 -05:00
chrg6
4750e1ffa5 Bound the translator's storage buffer compare-and-swap loops at 4,096 attempts.
The loops the translator writes for narrow storage buffer stores and float atomic adds end only when their
compare-and-swap succeeds. With robust buffer access on, an atomic on a word outside its buffer may return anything,
so the compare can fail for ever and the GPU hangs until the device is lost, as reported right after the first
cutscene on an Intel Arc GPU (#610). New translator patch 0041 counts the attempts in a private word (a local cannot
count round a loop in that pass, which runs on SSA form) and leaves the loop after 4,096; contention on a word needs
about as many attempts as invocations race for it. Shared memory loops stay as they are: a shared word in range is
always settled, and the mesh programs run that loop for every primitive index byte.

Checked: all 4,238 NVN2 compute programs an installed shader cache stores translate and pass spirv-val (vulkan1.3); 45
contain a compare-and-swap, 11 of them in a storage loop, which grew by 256 bytes each and now compare the count with
4096; the other 34 are unchanged. tools/xlate_smoke.py passes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 19:38:18 -05:00
chrg6
d02220f578 Give NVN2 compute programs the local memory their control section asks for, and put spills after it.
An NVN2 compute program's control section gives its local memory in bytes a thread at +0x68, beside the shared memory
size at +0x64 that the job already carried. Without it the translator declared its default of 0x1000 bytes: one of the
game's compute programs needs 4,752 bytes a thread, and its translation declared a 1,024-word local array that it
indexed up to word 1,187, outside the array. The job now carries "local_mem" from +0x68, and the lowering starts a
compute program's spill area after its own local memory (at least 0x1000 bytes) instead of always at 0x1000, where a
larger program's own memory would have overlapped it.

Checked: that program's translation now declares 1,188 words (indices up to 1,187) and passes spirv-val; two programs
of 3,456 bytes a thread translate as before. All 266 compute programs whose stored input id starts with 0 in an
installed shader cache translate and pass spirv-val (vulkan1.3), and tools/xlate_smoke.py passes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 19:38:17 -05:00
chrg6
e8b4d29f91 Give mesh output components outside the program's output map Maxwell's default of (0, 0, 0, 1).
A mesh program's header lists the components of each output vector it has; the fragment stage may read the others.
The native mesh entry function never wrote them, so they read as whatever the output held, and the fallback's vertex
stage wrote 0 for all of them, w included. Maxwell gives an unwritten component (0, 0, 0, 1), as the pipeline code
already pads a missing vertex output. Both paths now write that default: MeshSpirv.cs after copying each vertex's lines,
mesh_fb.c meshfb_vs with w as the bits of 1.0f whatever the type.

Checked: all 520 task and mesh programs of an installed shader cache translate and pass spirv-val (vulkan1.3); 500
mesh modules gained about 730 bytes each on average, so many of the game's mesh programs have partly listed vectors.
--probe-meshfb passes (fallback pictures equal the mesh pipeline's), and its module part converts all 520 new
translations with 0 failures, all 1,020 modules pass spirv-val and their compute pipelines build.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 19:38:17 -05:00
chrg6
27793f2efe Clear a mesh program's whole stage buffer before it runs, not only its primitive count.
Vulkan leaves workgroup memory undefined, and a mesh program need not write every vertex it has room for or every
index byte. The mesh entry function copies all of them into the outputs, so what an earlier workgroup left in shared
memory became vertices and primitives: on AMD, long thin triangles across the foliage's shadow map. The entry function
now sets the vertex lines, the primitive count and the index bytes to zero in a loop over the workgroup's threads
before the payload copy and the barrier. Task programs keep clearing only their mesh count.

Checked by translating all 520 task and mesh programs an installed shader cache stores with the translator before and
after the change: every one translates and passes spirv-val (vulkan1.3) both times; each mesh module grows by about
88 bytes, task modules are unchanged. tools/xlate_smoke.py passes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 19:38:17 -05:00
chrg6
bfe88e503a Add one anti-aliasing setting: the game's SMAA, off, FXAA, SMAA at its Ultra preset, or TAA.
Ocarina anti-aliases every frame with its own SMAA in three compute passes after the bloom composite. The new aa
setting (nx2navi.ini aa, the Screen tab's Anti-aliasing row) keeps that by default. off, fxaa and smaa leave out the
game's edge and weight passes and replace its composition with a pass of our own that writes the same square-rooted
RGB9E5 words into the scene target: a plain copy, an edge smoothing written here, or the SMAA reference implementation
with its area and search textures (MIT). taa is DLSS or FSR 3.1 at the scene's size, which the row sets through the
upscaler; while either runs, the game's SMAA stays whatever aa says. The game's passes are known by a hash of their
guest code. The shader build now also rebuilds a header when a file its source includes changes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 15:09:16 -05:00
chrg6
3529eff949 Offer both kinds of HDR in the menu again: the tone mapped picture and the game's own.
The HDR row lists Off, RenoDX (the game's picture tone mapped to the display, the one fixed look) and Native (the game's own HDR, taken up at the next start), with the peak, game and HUD whites under either.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 15:06:30 -05:00
chrg6
309e412f1f Make HDR one fixed look with true blacks, and keep only its on switch and the three whites as settings.
HDR on is the game's scene through the observer-response mapper, anchored to the game's own mid grey and tone slope, with half of the hue bend of the game's clamp: the defaults the menu had. The tone mapper choice, the mid grey, the tone slope and its match, the hue clip, exposure, highlights, shadows, contrast, saturation, highlight saturation, blowout, flare, hue, grade and gamma are gone from the menu, the settings table and the example ini; a file that still sets them works as before, the keys read by nothing and logging nothing. The menu's HDR row is Off and On, with the peak, game and HUD whites under it. The game's own HDR is still there for a file that sets hdr = native, and the row lists it only then. The luminance mapper and its grading code, which no setting reaches any more, are removed from the tonemap library, and the support buffer carries one vec4 for it.

The dark tones of a dark scene sat far above black: the present showed the game's sRGB-encoded picture as that encode decodes, linear near black, while the game is graded for a display of gamma about 2.2, and since the observer-response mapper became the default the 2.2 correction ran with the luminance mapper only. A scene value of 0.003 came out at 0.29 nits at a white of 350 nits, where a 2.2 display shows the game at 0.015. The present now always shows the picture as a 2.2 display would, and the tonemap aims its peak lower by that correction's inverse, so the brightest light still reaches the display's peak; the same value comes out at 0.017 nits.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 15:06:30 -05:00
chrg6
4f85f3d59a Leave the pools as imports for NVIDIA's own driver on Linux in the game itself.
On Linux every driver got shadow storage (copies of guest memory beside it), which exists for amdgpu, where importing guest memory costs the write protection of its pages. NVIDIA's own driver imports without that cost, so there the copies are only the slower path: in Kokiri Forest on 0.7.1 (RTX 4090) imports ran at 51.9 frames a second and the copies at 27.4. Until now only the AppImage's play.sh knew, by setting NX2NAVI_SHADOW=0 when NVIDIA's kernel driver was present at build time, so a game started any other way got the copies, and a PC with that kernel driver whose game ran on another card got imports where it should not. The game now chooses by the driver of the device it runs on, play.sh no longer sets the variable, and NX2NAVI_SHADOW=1 or 0 still decides. The driver is asked when the device is picked, before the storage is chosen.

Windows is unchanged: the device probe here reads "mem: mode mirror" with no shadow storage line, and the shadow line with NX2NAVI_SHADOW=1. The Linux path itself was not run: there is no Linux machine here.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 08:58:48 -05:00
chrg6
3d394dd84e Merge the fixes line: the stutter, memory, flicker and crash fixes, co-op, the mesh shader fallback and the launcher fixes.
Brought onto the line with FSR 4, its frame generation and the debug menu. Where both sides had added to the same
place, both stay: the patch table keeps the pickup count and the free camera, the settings list keeps both sides'
names, the menu includes the co-op page and the debug menu, and the launcher builder takes the pipeline list and the
FSR 4 folder. Both sides had added the menu's typed-character event; one definition stays, with the window code that
passes characters outside the basic plane.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 08:18:01 -05:00
epicmeme546
b59c0d40a8 Add a free camera to the debug menu.
With it on, the game draws from a camera of the menu's instead of its own, in play and in cutscenes. The left stick moves it along its view and sideways, the right stick turns it, ZR and ZL raise and lower it, R makes it faster and L slower, and Link stands meanwhile; or the camera stays where it is and the pad plays the game.

It works inside the game's own camera update: a new patch site sends the instruction at which the frame's position, target and up vector are final to a host function, which replaces them for the camera that follows Link and the one the events direct, so the game draws, culls and loads detail for what the free camera sees. The camera of the interface's 3D models and the one the sound follows stay the game's. The set is off unless the menu switches it on. A teleport's arrival starts the free camera again from the game's view.

Tested in Hyrule Field with scripted stick input (turn, rise, strafe, with Link's position unchanged), with the pad playing while the camera stays, across a teleport to Kakariko Village, during the Kakariko arrival cutscene, and switched on by a click in the menu.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 08:04:19 -05:00
chrg6
31e0a02901 Merge the mesh shader fallback: task and mesh programs drawn through compute passes and an ordinary draw where the card has no mesh shaders.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 06:01:39 -05:00
chrg6
b1408ee371 Add --probe-meshfb, which draws mesh programs through the mesh pipeline and through the fallback and compares the pictures.
The probe's programs are written in the shape the translator gives a task or mesh program and need no game files.
With a folder of game translations it converts those instead and builds their compute pipelines.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 05:58:43 -05:00
chrg6
0a535ff853 Add a tool that checks the translated shaders of a shader cache offline, with the game's own load checks and spirv-val.
tools/validate_shader_cache.py reads every module and its reflection from the pack and the loose files, says how many the game would refuse and translate again, runs spirv-val on the others and groups what it refuses by message. It writes nothing to the cache. tests/validate_shader_cache_test.py checks it on a made-up cache.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 05:29:06 -05:00
chrg6
719ee94e67 Write a pipeline cache only when its data grew, and give what a run compiles a cache file of its own.
pipeline-cache.bin was copied out of the driver and written whole at every save after any pipeline was created, also one the cache had held: tonight's logs show three saves of 358.1 MB in a run that added 0.3 MB, and 302 to 306 MB written in each of seven sessions that added about 0.5 MB each. The library warm in play built its 37,572 stage libraries into the same cache, which grew it by 1.6 GB: a save of 2026.7 MB in play, a file over pipeline_cache_max_mb, and the next start dropped it whole and compiled the pipelines it had held.

cache_save now asks a cache for the size of its data first and neither copies nor writes one whose size is what its file holds. What a run compiles goes into a second cache with its own file, pipeline-cache-play.bin (pipeline_cache_play, default 1; needs pipelineCreationCacheControl): pipe_create_in asks the first cache with VK_PIPELINE_CREATE_FAIL_ON_PIPELINE_COMPILE_REQUIRED_BIT and builds into the play cache only when that says a compile is needed, and in play only the play file is saved. At a start the play file is read back and merged into the first cache in memory; once it reached pipeline_cache_play_mb (64) it is folded in for good: pipeline-cache.bin is written once, before play, and the play file removed. The preparation modes fold it at any size and build into the one file as before. The library warm's threads create with no cache of ours, so their libraries reach the driver's own cache alone.

Checked with --probe-prewarm on a copy of a dev folder's caches (3,212 recorded pipelines, 333 compute shaders), no game run: with a filled pipeline-cache.bin every pipeline came from it and neither file was written; with none and a cold driver cache the compiles went into pipeline-cache-play.bin (75.9 MB written, pipeline-cache.bin not created); the next start merged it and wrote pipeline-cache.bin once (191.1 MB) and removed it; kept below the fold size, a play file of 68.8 MB gave 1,445 pipelines at 0.3 ms from the first cache where 470 hit without the merge, and was not written again. Not checked in play: the saves during a session, the library warm without a cache, and drivers other than NVIDIA's.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 04:56:26 -05:00
epicmeme546
5bdf583331 Add frame generation through AMD's FSR SDK 2.4 as a setting to try with FSR 4, and never generate a frame without the HUD-less picture.
runtime/vk_fg4.cpp makes the frame generation swapchain and context with the libraries FSR 4 comes with
(amd_fidelityfx_loader_vk.dll and amd_fidelityfx_framegeneration_vk.dll beside the executable). vk_fg.cpp takes
that path only with fsr4_fg = 1 while FSR 4 is the upscaler; the default stays the FSR 3.1 library. The loader
picks the version for the card: the machine-learned FSR Frame Generation 4 on Radeon RX 9000 cards with Windows 11,
which is untested, and 3.1.6 elsewhere. On an RX 7900 XT (driver 26.10.1) it lists frame generation 3.1.6 and the
swapchains 4.0.0, which the driver brings and the loader chooses, and 3.1.7. The swapchain in place is wanted only
while its library is the one to use, so a change of the setting or of the upscaler, or a failure of this path,
takes it down as switching frame generation off does and the next present makes it with the other library.

The preparation gives this library the camera's position and axes, which FSR Frame Generation 4 requires, and a
scene scale of one metre a unit: with the 0.01 the FSR 3.1 path uses, version 3.1.6 drew grey translucent shapes
into the sky of its frames while the camera turned (160 captures of the screen during a camera sweep; clean with 1).

Both paths now generate a frame only when the picture without the HUD is there for it: generated from the
presented picture alone, the HUD would be warped with the scene behind it. In four configurations (21:9 with either
library, a 16:9 picture in a 21:9 window, a 1080 picture without HDR) every generated frame had it, and the log
counts the frames without. On screen, of the 6,404 pixels of the HUD's item button that stayed fixed through a
camera sweep with the FSR 3.1 library, 6,162 stayed fixed with this one.

Standing in Hyrule Field at 3440x1440 with FSR 4 Quality the game draws 43.0 frames a second with this path and
42.2 with the FSR 3.1 library, each shown twice over. One run changed the present mode, HDR, fullscreen, frame
generation, FSR 4, this setting and the upscaler in turn: 216 screenshots without a bad frame, and no failure.

The SDK's frame generation headers join runtime/third_party/ffx_sdk, unmodified. tools/make_kit.py and
tools/make_launcher.py take the third library from the --ffx4 folder when it is there, and tools/make_game.py
copies it beside the game.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 04:49:01 -05:00
chrg6
cba95f8d0a Record in shader-prepared.bin which seed it was prepared from, and prepare again at an update when the seed changed.
The prepared list named its shader variants and nothing about where they came from, so an update that keeps the prepared shaders (shader_carry) kept the old list whatever seed the new kit writes: variants only the new seed names, from a newer pipeline list or a change to which variants are prepared, were translated when play first drew them. The existing identities do not cover this: nx2navi_xlate.id and identities.txt name translators, which decide cache keys and what is carried over, not which variants are listed.

The list is now version 2 (runtime/prp_file.h): after the head come the sha256 of seed-programs.bin, the sha256 of seed-answers.bin and the translator identity, written by gfx_shader_prepare_seed; the three readers go through gfx_shader_prepared_read and still read a version 1 list. At an update step_shaders writes the seed first (prepare_shaders.py --no-run, about 4 s) and keeps the list only when its digests are that seed's (make_game.py seed_changed); another seed, or a list that does not say, is prepared again. Another translator alone still carries over: input ids do not depend on the translator, and preparing everything again for it is what carrying was made to avoid.

Checked with tests/prp_file_check.py (the C layout against make_game's reader), three launcher tests, and the exe's --prepare-shaders on a seed without records in a folder of its own: the digests it wrote are those of the seed files, one byte more in the seed reads as changed, and after preparing again it does not. A version 1 list of 42,142 variants and the same list as version 2 are both read whole by --probe-prewarm.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 04:36:33 -05:00
epicmeme546
4d5454d380 Add AMD FSR 4 upscaling through the libraries of AMD's FSR SDK 2.4, as an Upscaling choice beside FSR 3.1.
runtime/vk_ffx4.cpp loads amd_fidelityfx_loader_vk.dll from beside the executable and asks it which upscaler
versions the device can run. Where a 4.x version is listed (Radeon RX 6000, RX 7000 and RX 9000 cards with AMD's
driver 26.10.1 or newer) the menu's Upscaling row gains AMD FSR 4 Native AA, Quality, Balanced, Performance and
Ultra Performance, and fsr4 = 1 runs it in FSR 3.1's place with the same inputs. Its contexts are made with that
version asked for by its id and the provider is asked afterwards which version it runs, so no other upscaler can
be shown under the name. When a context or a dispatch fails, FSR 3.1 makes the frame, and after three failures
FSR 4 is off for the run. Each upscaler starts its history anew on the frame after a change from one to the other.
The setting is off by default and the Linux build compiles stubs.

On an RX 7900 XT (driver 26.10.1, 3440x1440, HDR) the library runs FSR 4.1.2: a context takes 54 ms to make and
217 MiB of video memory. Standing in Hyrule Field: Quality 47.8 fps where FSR 3.1 gives 51.5, Native AA 41.4.
Screenshots of 601 consecutive frames standing, 801 during a camera sweep, 701 each in Kakariko and the
graveyard, and 1,301 across changes between FSR 3.1 and FSR 4, their modes and off show no flicker that FSR 3.1
does not have, and it runs together with FSR 3.1 frame generation.

The SDK's API headers are in runtime/third_party/ffx_sdk, unmodified, with the licence. tools/make_kit.py and
tools/make_launcher.py take AMD's two signed libraries with --ffx4, and tools/make_game.py copies them beside the
game when the kit has both.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 03:22:08 -05:00
chrg6
acc1ae25bf Merge co-op, off by default: rooms through a relay, progress sync between the players' own saves, and a Co-op tab.
Without the other players drawn in the world, which are unfinished. No relay address is built in, and with co-op off nothing opens a socket. Built on Windows and tested against a relay on this PC only; two games in one room and any real network have not been tried.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 00:40:20 -05:00
chrg6
6cd03fb630 Declare a texture whose size query reads its layer count as an array, so the count is the texture's own.
A program that only asks a combined-handle texture for its size got that texture declared as plain 2D, the runtime bound a one-layer view, and the layer count read as 1 where the console answers the texture's real count. The game's particle vertex shaders read exactly that count, of a texture their pixel shaders sample as a 2D array, and use it as the frame count of a flipbook, so such particles stayed on their first frame. A size query that reads the component after a 1D or 2D type's dimensions now makes the declaration an array; a plain texture bound through an array view still reports one layer. 74 of the stored shader variants change (the contributor's sweep, all valid; a reader here found the same 74 in a shader cache on this PC), and the contributor's before-and-after pictures differ in the one scene tried, the Wallmaster's warning disc.

Goes in with the image read capability so that installs translate their shaders again once. Built here; tools/xlate_smoke.py's new case reports the texture as plain 2D with the translator before the patch and as a 2D array with it, and all three modules validate. Not played with the new translator.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit e4fac75190b4baf3811feef45b3302a9216cb8b2)
2026-11-11 00:39:58 -05:00
chrg6
6628cf69f0 Declare StorageImageReadWithoutFormat when the translator reads an image that has no format.
The translator declares every float storage image without a format and turns a load of it into OpImageRead, which SPIR-V allows only in a module that declares StorageImageReadWithoutFormat; only the write-side capability was declared. Of the 44,206 shader variants a 0.7.1 install stores, 117 compute shaders were invalid SPIR-V for that reason (the contributor's sweep with spirv-val, for NVIDIA's, AMD's and Intel's host options: 117 before, 0 after). The drivers tried accept them, so nothing crashed, but an invalid module is whatever a driver makes of it. The read now declares the capability, once a module.

The translator's identity changes, so an updated install translates its shaders again (the carry pass serves the old translations meanwhile). Built here from the local package cache; tools/xlate_smoke.py's new compute case fails with the translator before the patch and passes with it, and both modules validate. Not played with the new translator.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 62e5c345a2ec3e2cc70be49214997ff76e691309)
2026-11-11 00:39:58 -05:00
chrg6
7e07e13bac Add co-op, off by default: rooms through a relay, progress sync between the players' own saves, and a Co-op tab.
Each player keeps their own game and save. One player makes a room, the others join it with its secret, and story flags and, by the room's rules, items, songs, quest items, small keys (a shared pool), rupees and ammunition reach every save. The layer is a host thread with one UDP socket to a relay the players run themselves (tools/coop_relay.py, Python's standard library only); the messages between the players are sealed with a key from the room's secret (XChaCha20-Poly1305, Monocypher 4.0.2 vendored with its licence and a row in THIRD_PARTY_NOTICES.md), every change is signed by the player who made it, a player accepts a room by its members' keys and the key of its rules, the save is copied to coop-backup before anything is applied, and values are set through the game's own routines between frames. The Co-op tab makes, joins, accepts, removes and leaves, and the menu takes typed text for the name, the relay and the secret. This is the contributor's pull request #518 on this line.

Nothing reaches the network while co-op is off: the socket is opened, and the relay's name looked up, only after co-op is on, a relay is set and a room is made or joined. There is no default relay.

Left out of the pull request: the other players drawn in the world (the "puppets") with the copied engine they need. They were unfinished, added two patch sites to the game's per-frame update that could not be put through the differential tests here, and their file helpers clashed with the ones this line already has. So no position is sent: the POS message's codec stays, nothing sends it.

Changed against the pull request:
- The menu's test hook drives the Co-op tab only when it comes from the environment. From nx2navi.ini it could turn co-op on, join a room and accept its offer.
- The log's label for a room is hashed from the secret instead of being its first three characters.
- A game that has not saved yet has no save to copy, and takes nothing from the room until it has saved once; that used to count as a copy made.
- A PING's token no longer carries the PC's uptime.
- On Windows the maker's key file and its folder get an access list with the player's account alone.
- The tests that link the platform layer get the socket library, and the save test a stand-in for the title screen's hook.

Checked on Windows, where the pull request had never been compiled: the runtime builds and links; --probe-coop passes (sockets on 127.0.0.1, the codec against its byte vectors, a fuzz of every parser, two sessions through a hostile mock relay, a relay restart, the sync engine); tests/coop_relay_test.py passes its 61 tests, with the probe through the real relay on 127.0.0.1 at 0 and 30 % loss; tests/coop_page_check.py passes and its deliberate fault fails 48 checks. Not checked: two games in one room (one game runs at a time here), any real network, the tab in the game.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 00:11:41 -05:00
chrg6
8e18097b7b Pass the link map's path to the linker with -Xlinker, so a comma in the game folder's path no longer fails the link.
make_game.py passed the map as -Wl,--Map=<game folder>/build-cache/ocarina.map, and -Wl, cuts its argument at every comma: with a comma in the folder's path the part after it reached the linker as an input file and an update ended with "the link failed" (issue #470). -Xlinker hands the path over as one argument. build_game.py already did so on Windows and now does on Linux too.

With MSYS2's clang and ld here, a link into a folder named "a, b" fails with the -Wl, form ("cannot find  b/t.map") and writes the map with -Xlinker.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 23:16:17 -05:00
chrg6
ce66223fc7 Encode each note button picture once when drawing the button prompts.
The prompt overlays for the pad layouts repeat the same note pictures, and every one was fitted and encoded to ASTC again for each layout. The encoded bytes are now kept for the build under the picture and its box. With stand-in pictures, 42 note textures over seven layouts came out byte for byte the same from 12 encodes instead of 42, in 0.66 s instead of 2.30 s.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 23:14:00 -05:00
chrg6
f017849e2b Show 100% for the shader step only when the last shader is built.
The shader step's progress event rounded its share to four decimals, and the launcher shows the whole percent below it: 42,140 of 42,142 shaders built read as 100% while a long driver compile was still running. The event now carries the share as computed, so the bar stays at 99% until the count is complete. The test feeds the last counts of a 100,000-shader build and fails with the rounding.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 22:59:03 -05:00
chrg6
4af930d0c2 Ask for the disk space the build really needs, and say how long an install really takes.
The launcher asked for 31 GB where the build's own check now asks for about 34, so a disk between the two passed the first check and was refused seconds later. Both say 34 GB now. The build no longer asks for the whole shader preparation's space when the game folder already holds translations. The texts said 10 to 25 minutes for an install that took players 27 to 41, and 5 GB for a build cache that measures 1.6. A build error's message goes into the launcher's log as one line.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 16:12:52 -05:00
chrg6
92e3cc0adb Merge the launcher fixes: updates that stop keep the game, honest progress and errors, and a faster file check.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 16:08:15 -05:00
chrg6
62a02da381 Unpack the texture archive in pieces when drawing the button prompts.
pad_prompts.py gave each packed game file to the decompressor in one
call, which returns one bytes object grown by copying. On made-up data
of the size of the interface texture archive, 69 MB packed and 244 MB
unpacked, that takes 21 s on a fast PC; players' builds waited 44 to 52 s
before the step's first folder, most of its minute. In 64 KiB pieces
joined once the same bytes take 0.3 s.

The prompts step's key held the digest of the three scripts' bytes, so
this edit would have drawn every install's prompts again, as two of the
last four releases did. It now holds a constant changed by hand, whose
value is the scripts' digest in 0.7.0 and 0.7.1, and a test fails when
the scripts' logic changes, to ask whether the constant must change.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 16:00:37 -05:00
chrg6
e678e1f38e Check the disk space and the build tools before the long steps.
Only the RomFS image's space was looked at, and only when that step
began: a disk that held the image but not the build cache or the shaders
stopped the build in the compile or, half an hour in, in the shader
preparation. The build now adds up what the steps it will run write into
the game folder (the image and 1 GiB, 2 GiB for the build cache, 4 GiB
for a full shader preparation, the least each is known to need) and
stops at once when the disk has less, naming each part and how much is
missing.

On Windows a build whose compile step will run first compiles and links
an empty program with the installed tools, against the libraries the
game links. Tools that are incomplete or blocked stopped the build only
in its compile step, after the image and the lift; the message says what
failed and how to get the tools back.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 15:55:26 -05:00