runtime/vk_up_defer.h holds, per owner, a DLSS feature, an FSR context or an image frame generation can still read,
each with the timeline value of the last submission that named it and an optional present count. upd_take releases,
in the order they were put, the entries whose value the GPU has reached and whose present count has passed; nothing
in it waits or locks, so the owner checks at its own calls on the thread that makes its other upscaler calls. It is
the piece the next commits use to take the upscalers' device-idle waits off the replaying thread: those waits stall
the present's flip, the completion thread and upload submits with the queue lock held, at every pause-screen size,
reload, window size or mode change. Nothing uses it yet.
tests/up_defer_check.py builds tests/up_defer_check.c with the header as C and as C++ (vk_ffx.cpp and vk_ffx4.cpp
include it) with -Wall -Wextra -Werror and checks both gates, the order, a full list, a null handle and a release that
puts. It passed, and failed with each of three faults put into a copy of the header.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The review found two windows in memory.c lazy_fault, where a fault holding frz_lock and lz_lock finds its address
neither armed nor in flight. It returned 0 there, and access_fault then asked for the page's state without a lock.
A write whose range a flight gave back while the write waited for frz_lock went on to thaw_fault, whose thaw released
every armed range of the 2 MiB region (lazy_drop_region_locked), each fetched under the lock. And after a release
that sets no hold (mem_lazy_skip's give-back of another buffer's range), the completion thread could arm the page
again between that 0 and access_fault's query, so a read saw an inaccessible page and went to the crash handler; that
one predates the ranges in flight.
Now a fault that finds a flight there waits for it as before. Otherwise it releases lz_lock, asks for the page's state
while it still holds frz_lock, under which no arm runs, and runs the access again when the page allows it: a read on
a readable page, a write on a read-write one. A write to a frozen page still goes on to thaw_fault, and an address
that is not ours to the crash handler.
The new late_write scenario of tests/lazy_fetch_check.py has a thread write a range whose release starts and ends
while the write waits for frz_lock: the write runs again and the region's other range stays armed. With the old
return of 0 it fails, the other range released. The read's window has no check: the arm would have to land between
two instructions. Not reproduced in the game before the change; lazy_fetch_check passed in all its scenarios.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the setting at 0, frz_lock was held across every fault's and release's fetch again and mem_thaw released under the
lock, but two parts of the new code stayed. vk_memory.c mirror_evict and hot_check still fetched their victims'
armed ranges before taking pool_lock again, and a release still put up to 16 copies in one submission. Those are the
parts that run only with a device and have no check without one, so a device loss caused by them was the one case the
switch could not take back. Now vk_memory.c reads the setting too (evict_unlocked, once on the replay thread, where
both run): at 0 neither drops pool_lock, and the release under it fetches everything, victim by victim, as before. And
memory.c lazy_take_batch_locked takes one segment at a time at 0, so each is fetched on its own.
What stays at 0 is the table of ranges in flight: a touch of a range being fetched waits for that fetch and runs
again (a write no longer goes on to thaw_fault and releases its region), the hold is set as the range goes out, and
mem_lazy_touches counts the range. memory.c "Ranges in flight", nx2navi.ini.example and docs/building.md say so.
tests/lazy_fetch_check.py gains locked_release, the release scenario at 0: three fetches of one copy each, where the
batched release makes two of up to two copies. It fails with the cap taken out. The eviction's side has a compile
check only. Not reproduced before the change; lazy_fetch_check passed in all its scenarios.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
memory.c mem_thaw calls lazy_release_regions before it takes frz_lock, so the copy a file read's thaw needs (the
buffer's armed ranges with stale bytes) no longer holds up the other threads' faults, freezes, thaws and arms. All 20
scenarios of tests/lazy_fetch_check.py passed with that call taken out: the thaw scenario reaches the same end state
through thaw_begin_locked's lazy_drop_region_locked under the lock. The new thaw_unlocked scenario has a thread thaw a
page of a range armed with stale bytes while the fetch takes 300 ms, and freezes another region meanwhile: the freeze
returns at once, and took 300 ms with the call taken out. locked_thaw runs it with NX2NAVI_WB_LAZY_UNLOCKED=0, where
the freeze waits for the fetch as in 0.10.1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
memory.c mem_lazy_arm marks the region it protects in lz_arm_r, so that lazy_flags_locked keeps lzr set when a
release's flight in the same region ends during the arm's clean test. Without that mark the flight's end cleared lzr,
lazy_fault let a read of the arming range go, and access_fault passed it to the crash handler. All 20 scenarios of
tests/lazy_fetch_check.py passed with the mark taken out. The new arm_flight scenario has a release fetch one range for
100 ms, an arm of another range of the region wait 400 ms in its clean test, and a read of that range fault after the
flight ended: it passes, and exits with an access violation when lazy_flags_locked ignores lz_arm_r.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A CPU touch of an armed range ran its fetch (vk_memory.c lazy_fetch: a GPU copy after everything handed over, and a wait of up to 10 s) inside the fault handler under frz_lock. Every other fault, thaw, freeze and arm waited for the whole copy meanwhile: the replay's copies of guest memory (mem_copy_readable, vk_memory.c mirror_capture) and its freeze pass, the completion thread's arms, file reads and pool finalizes. A write that lost the race to the fetch went to thaw_fault after it and released every other armed range of its 2 MiB region, a second fetch. mirror_evict and hot_check fetched their victims' ranges under the exclusive pool_lock, which the completion thread's arms and every pool lookup wait for. This is AUDIT F-4-05 (C-12); the design's probe of the unchanged code had an unrelated mem_copy_readable, arm and freeze each wait 299 ms behind a 300 ms fetch, and the losing write 378.8 ms with two fetches.
A range now leaves the armed list into a table of ranges in flight (memory.c "Ranges in flight", lz_fly) in the same lz_lock hold, and stays there, its pages inaccessible, until its bytes are down and its pages read-write again (lazy_fly_run), without frz_lock. A fault on a range in flight waits for that entry alone on lz_lock's condition and runs the access again, the losing write included; a thaw, a mapping change, a release of its buffer, an arm, a freeze and mem_lazy_touches see it. Every store to lzr is made under lz_lock from the list, the entries and the region an arm is protecting (lz_arm_r, which replaces the previous commit's restore). An entry starts under frz_lock and lz_lock and ends under lz_lock alone, so a holder of frz_lock may wait for one: its fetch takes only the queue lock, which no frz_lock taker holds. mem_thaw releases what is armed in its regions before it takes frz_lock (lazy_release_regions), so file reads and pool finalizes fetch without it; a mapping change's thaw still fetches under it, as its page calls follow. The holds a fault sets (lz_hot, lz_hots) are now set as the range goes into flight, so an arm meanwhile finds them. The fetch takes several copies in one submission and one wait (MemLazyCopy), and the back end has four slots of command pool, command buffer and fence, so fetches of different ranges run at once; a release takes up to 16 armed ranges out together.
mirror_evict and hot_check now fetch what only their victims' mirrors hold before taking pool_lock exclusively, and then, under the lock, release only what was armed since (usually nothing) before the mirror leaves the list and the device address table names the imported buffer again. The design moved the release after the lock instead, which would have had the table change before the fetch: a shader of a submission still running reads through the table as it changes, and the fetch waits for every submission handed over. A victim that vk_pool_fini took off the list meanwhile is left to it; hot_check copies its log line's fields under the lock, as its records may be freed once the lock drops.
The new setting wb_lazy_unlocked (NX2NAVI_WB_LAZY_UNLOCKED, default 1, restart) set to 0 keeps frz_lock from the take-out to the end of each flight and leaves mem_thaw's releases to the thaw, as in 0.10.1; the table, the slots and the eviction order stay. The "mem: lazy write-back" line counts segments fetched; a second line gives the touches that waited for a range in flight, the longest such wait and the most ranges in flight at once; "mem: sizes" counts fetches that found every slot busy. The frz_lock and lz_lock comments say what holds what now (B-12). mem_lazy_touches has callers outside memory.c (camera_speed.c, nvn_api_cmd.c ctl_fingerprint), which now skip a range in flight instead of faulting on it and waiting.
Not reproduced in the game before the change. tests\lazy_fetch_check.py now runs 20 scenarios as their own processes: arm races, no stall of freezes, copies, arms, thaws and releases of other ranges during a fetch, joins with frz_lock held elsewhere, a losing write that keeps the region's other range armed, two fetches at once, a thaw, a mapping change and a release meeting a range in flight, an arm refused over one, the foreign give-back, the chunk mode, the old wait with wb_lazy_unlocked = 0 (joins and losing writes as well), the report lines, 80 touching threads past the 64 entries, and a freeze refused; all pass, in six runs. Taking the join before frz_lock out fails the join scenario. cfg_rows_check reports 0 problems; every runtime file compiles, and memory.c and vk_memory.c add no -Wall -Wextra warning; the test matrix passes 75 of 77, installer_test and worktree_test failing for the environment as before. vk_memory.c's slots and the eviction's order have no check without a device.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A fetch of lazily written pages runs inside the fault handler under frz_lock (memory.c lazy_gone_locked and lazy_piece_fetch_locked call vk_memory.c lazy_fetch, a GPU copy after everything handed over and a wait for it), so every other fault, thaw, freeze and arm waits for the whole copy. The line gave only the fetches' sum: the 0.10.0 session's 848 fetches took 415.8 ms in all, and how long one took, or how long another thread waited behind it, was not known. Both fetch sites now keep the longest fetch, and lazy_fault keeps the longest time a fault waited to take frz_lock; the report line prints them as "the longest X ms, faults waited up to Y ms for the freeze lock" and starts both over. No tool parses the line.
tests\lazy_fetch_check.py's new report scenario fetches for 30 and 120 ms and has a third fault wait 60 ms for frz_lock: the line reads 120.29 ms and 60.03 ms, and the next one 0.00 for both. arm_race, arm_race_slow, wb_lazy_check and heap_lazy_copy_check passed; memory.c compiles without a warning under -Wall -Wextra.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
mem_lazy_arm made a range's pages inaccessible (lazy_protect_locked: the protect, then the back end's clean test) and set the region's lzr mark only after the segment was in the list. lazy_fault returns 0 at once for an unmarked region, without taking frz_lock, so a CPU read in that window found the page inaccessible in access_fault and went to the crash handler as an access violation. A write survived only because thaw_fault waits for frz_lock. Arms come from the completion thread (vk_memory.c vk_gpu_written_back) when a submission's fence completes, which is when the game's own fence wait returns and it reads the results; the window lasts as long as the protect and the clean test, which can take tens of milliseconds while the driver pins memory.
The mark is now set before the protect, after the cheap refusals, and put back when the protect or the clean test refuses the arm. A fault from the protect on finds the mark, waits for frz_lock and then finds the segment, or the pages given back. Every store to lzr is made under frz_lock, which the arm holds, so putting it back is exact.
Not reproduced in the game before the change. The new tests\lazy_fetch_check.py reproduces it with the real Windows fault handler: a thread reads a page while it is armed and given back 20,000 times (arm_race: an access violation in 5 of 6 runs before the change), and once with a clean test of 100 ms (arm_race_slow: an access violation in every run). Both pass in every run since. wb_lazy_check, heap_lazy_copy_check, freeze_hold_check and mem_growth_check passed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Whether the 64-bit generations hold past 2^32 in the game, with every texture check, mirror sync and shadow copy of a
real scene, could not be seen in play: reaching 2^32 takes 15 to 66 hours. gen_wrap_check shows it for the generation
code alone. NX2NAVI_GEN_SEED=<n> (nx2navi.ini gen_seed, diagnostics, default 0) makes the run's first generation
n + 1: with 4294966000 a run passes 2^32 within its first seconds, and with 1099511627000 the low 32 bits pass
through 0 again.
The first gen_next, before anything is stamped, reads the value (gen_seed). It is parsed with strtoull, decimal or
0x hexadecimal: strtoul stops at 2^32 - 1 where unsigned long is 32 bits, as on Windows, and would turn a seed past
32 bits into 4294967295 without a word. It is capped at 2^62, far from the 64-bit end, and only ever raises the
counter, since a lower value would leave stamps newer than it that read as written at every check. A value that is
no number, or negative, is logged and ignored; a seed in use is logged as "mem: page generations start at <n>
(NX2NAVI_GEN_SEED, a test switch)". Without the switch the only cost is one compare a generation that is true once.
cfg.c gets its metas row (0, 0..4611686018427387904, read at start), its known[] name and its sections[] entry, each
on a line of its own next to the other memory test switches (STAGING_FAIL_AT, VRAM_BALLAST_MB); nx2navi.ini.example
gets a commented gen_seed entry under [diagnostics]. The settings menu does not show it.
tests/gen_wrap_check runs the generation code a second way: the counter left at 0 and the seed taken from
NX2NAVI_GEN_SEED, for 4294967288, 0xfffffffff8, 0x7ffffffffffffff8 (capped), 12abc, -8, 0 and unset, each with the
start and the log line expected of it, then the same compares across the boundary. With strtoul in place of strtoull
two of those runs fail. Checks that passed: gen_wrap_check, gen_width_check, cfg_rows_check (0 problems),
pass_cc_check on vk_memory.c and cfg.c, no new -Wall -Wextra warnings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
vk_memory.c handed out page write generations from a 32-bit counter (gen_now) and every consumer compared them as
32-bit values, with 0 meaning "never stamped". At 124 to 336 generations a frame (a 0.10.0 log with trace = perf) the
counter wrapped after about 66 h of play at 60 fps, 27.6 h at 144 and 15 to 17 h at 240. Past the wrap a stamp made
before it compared newer than every later check and one made after it older: textures and VRAM mirrors missed the
CPU's writes (stale textures, and the lazy fetch copying older mirror bytes over a CPU write), pages nothing wrote read
as written at every check (a hash or upload every time, and every such page of a mirrored pool copied up at each
sync), and the generation handed out at the wrap was 0. At 64 bits nothing wraps: 2^64 lasts millions of years at
336 a frame and 240 fps. Below 2^32 every value and every compare is the same as before.
What changed: gen_now, both tables (gen_chunk, cgen_chunk), reg_max and creg_max, PoolRec's synced_gen, mgen and sgen,
dirty_gen and DIRTY_UNSYNCED, VSample.mgen, every local and parameter that holds a generation in vk_memory.c,
vk_texture.c (Tex.wgen and gpu_gen, PEnt.since, storage_rewritten and its callers, sweep_hard's write-back check
included) and tex_probe.c, and vk.h's vk_mem_changed, vk_mem_changed_snap and vk_mem_unchanged(_why)_locked. The verify
mode's mismatch line prints the generations with %llu. The readers that take no gen_lock (lazy_clean, cpu_wrote_since,
verify_cb, vk_mem_sizes) stay lock-free at 64 bits: the slots, mgen, gen_now and a new chunk pointer are now stored
atomically (relaxed, or release where a reader acquires), the same instructions on x86-64, and a static assertion
holds that 64-bit atomics are lock-free. No lock, wait or thread changes.
gen_next, which hands out every generation, no longer warns at 0xC0000000 and up or at the wrap, which cannot come;
it logs one line when the count reaches 2^32, where earlier versions ran out, with the frame, the hours and the rate.
Cost: the tables take 8 bytes a page instead of 4 (512 KiB more per 256 MiB of guest address space stamped, both
tables together, allocated as before when a chunk is first stamped), reg_max and creg_max 2 MiB each instead of 1,
Tex and PoolRec 8 bytes more, PEnt 8 more. The page walks read 8 bytes a slot; a micro-benchmark of the walk measured no
difference.
Not reproduced in the game before the change: the wrong answers were reproduced by compiling vk_memory.c's generation
code with the counter seeded below 2^32. tests/gen_wrap_check now runs that code, with the readers outside its
section, across 2^32, 2^40 and 2^63 and checks that the compares answer as below the boundary; on the code before the
change 19 of its checks fail at 2^32 and the other two seeds do not fit the counter. The new tests/gen_width_check
compiles vk_memory.c, vk_texture.c and tex_probe.c with -Wshorten-64-to-32, -Wformat and -Wincompatible-pointer-types
as errors, so a 32-bit local left behind is found (shown by reverting single locals, fields and formats). Checks that
passed: gen_wrap_check, gen_width_check, pass_cc_check of every runtime file, no new -Wall -Wextra warnings in the
three files, tex_release_check, tex_compact_check, wb_lazy_check, gpa_check, mem_growth_check, mem_budget_check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The review found that nothing on the release path ran the new export check: tools/make_launcher.py build_app and
tools/make_kit.py copied whatever --dlssg DLL they were given, and the release script still named the DLL of 0.8.0,
which lacks nx2sl_reflex2. Shipped that way, Reflex would never hold the frame limit while players still got this
branch's other changes. make_launcher.py check_dlssg and make_kit.py main now run build_dlssg.check on the --dlssg DLL
beside the translator's check, before anything is resolved, downloaded or deleted; build_dlssg.check also stops on a
missing file and on a file that is no DLL, with a message instead of a traceback. tests/dlssg_exports_check.py adds a
DLL with every declared export (it passes), the two-export DLL, a missing file and two files that are no DLL (they
stop, naming why), make_launcher.check_dlssg on both DLLs, and that both scripts' main makes the check before
streamline_pin.resolve and shutil.rmtree; it fails when the call is taken out of make_launcher.py main. The DLL built
from this branch passes make_launcher.check_dlssg; the DLL of 0.8.0 is refused, naming nx2sl_reflex2.
docs/launcher.md and docs/building.md "Checks" say so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The runtime takes a missing optional export (nx2sl_reflex2, nx2sl_frames_max) for an older DLL and leaves the
feature out with one log line, so a release that ships a DLL built from older sources than its runtime loses Reflex's
frame limit without an error; the release script took the DLL of 0.8.0 from a fixed path. After the build,
build_dlssg.py now reads every PFN_nx2sl_<name> in runtime/dlssg/nx2_sl.h and the DLL's export directory (a small
PE reader of its own, PE32 and PE32+) and exits naming each export that is missing; --check <dll> makes the same
check without building. tests/dlssg_exports_check.py builds a DLL with two of three declared exports with MSYS2's
clang and checks that the third is named, and that nx2_sl.h's own declarations are read in full; docs/building.md
"Checks" and docs/launcher.md name both. The DLL built from this branch with the pinned Streamline 2.14.16 SDK passes
(15 exports); the one built before nx2sl_reflex2 fails, naming it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reflex's hold of the frame limit with DLSS-G is unmeasured here (no RTX 40 or 50), so a player needs a way back to
the pacing of 0.10.1 without an older DLL. vk_dlssg.c limit_allowed reads the setting through cfg_bool, again
whenever a setting changed (cfg_version), as vk_lowlat.c reads low_latency; with 0 the presenting guest thread asks
Reflex for no limit, the present thread hands Streamline 0, and the "frame rate:" line names NX2NAVI_REFLEX_LIMIT=0 as
the reason the game's own limiter holds it. The row sits beside FG_MULT in metas[], beside REFLEX in known[] and
beside LOW_LATENCY in sections[] (display), and nx2navi.ini.example explains it under framegen_multiplier.
cfg_rows_check reports 0 problems; vk_dlssg.c and cfg.c compile clean with the dev build's flags.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With DLSS-G, Reflex's sleep held each frame's start with no limit while the game's pacer still held the limit on the
present thread and at the window image's acquire (A-16, P-16): the pacer's wait came after the picture was drawn, so
the pad was read up to a period before the picture left, on top of Reflex's own wait for the GPU.
vk_dlssg.c vk_dlssg_pace, on the presenting guest thread in nvnQueuePresentTexture, asks dlssg_pace.h which limit Reflex
should hold and stores it; vk_dlssg_frame on the present thread hands a changed limit to Streamline before its present
(reflex_apply, under the present lock, which keeps Streamline's options calls on one thread at a time), as does each
new swapchain, which has neither mode nor limit. GfxBackend.frame_paced now returns the period the pacer still holds:
vk_backend.c vk_be_frame_paced gives the game's ceiling (frame_step_ceiling_ns, 240) while Reflex holds the limit,
0 where a driver's low latency holds it (vk_lowlat_pace, unchanged), else the period; during a movie the back ends get
0 and the pacer keeps the movie's period and catch-up slots as before. The pacer takes the limit back before the first
host present, after 200 ms without one, with a DLL older than nx2sl_reflex2 (one log line at start), for a limit
Streamline refused, and for the run when the frames show Reflex does not hold it; the "frame rate:" lines name who
holds it, the "dlssg: present N" line counts the frame starts Reflex held, and Reflex's sleep now counts as pacing
(perf_end_any, on whichever thread acquires). No wait is added on a drawing thread: the limiter's wait moves from the
acquire's sleep_until and the present thread's slot to Reflex's sleep a few lines later in the same acquire, and the
present thread's options call returns at once. docs/architecture.md names Reflex as a limiter. Not reproduced before
the change (no RTX 40 or 50 here); vk_dlssg.c, vk_backend.c and nvn_api_obj.c compile clean with the dev build's
flags, and dlssg_pace_check, fg_reset_check and frame_step_check pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reflex can hold the frame limit where each frame starts (nx2sl_reflex2), but the driver only takes a limit through
Streamline, the SDK does not say whether its minimum interval counts the frames the game draws or every frame on
screen, and nothing tells the game that the limit holds. dlssg_pace_step decides from what the presenting guest
thread sees alone: the limit Reflex should be given (the drawn period, 0 during a movie, before the first host
present, after 200 ms without one, or when not allowed), and whether Reflex holds this frame's limit, which it does
only once Streamline took exactly that limit. Over windows of 60 presents Reflex held to one period and multiplier,
over half sooner than three quarters of the period means nothing holds the game and the pacer takes the limit for
the run; over half the multiplier periods apart means the driver counted the frames on screen, and Reflex is given
the period over the multiplier from then on, or the pacer the limit if it happens again. Being pure, the decision is
checked without a GPU: tests/dlssg_pace_check.py builds it with undefined-behaviour traps and drives it through
each case; four mutations of the header (the window's majority, the idle bound, a host present stamped after the
clock read, the applied-limit test) each fail it. docs/building.md "Checks" names it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The review found that docs/architecture.md said the ends of a crash and a fatal error make no call into RTSS's library,
while rtss_limit.c rtss_limit_crash puts the profile back as an orderly exit does where the state file could not be
written. The text now says that, that it never runs from RTSS's own thread, that the line takes each later value
before the profile does, and that a state file that cannot be read is left with the other executables' lines. Its
"one limiter" and README.md claims were corrected with the movie and unproven-hold fixes, and nx2navi.ini.example with
the kept-out restore. docs/building.md's description of tests/rtss_limit_check.py now names the checks added since:
the previous written value, a kill inside a save, put backs that do not land, an unreadable state file and a crash on
RTSS's own thread.
No behaviour changes. Checks that passed: tools/check_content.py --staged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The review found that nothing ended an RTSS hold that was never proven: when RTSS listed the game with the limit in
its profile but one sign never came (presents of another API value than Vulkan's, the update flag never cleared, a
period that never moved), the profile kept the limit and the game's pacer held the frames too for the whole run, two
limiters where the pacing rules allow one, with only a reason line in the log and nothing in the menu. Before the
hold had to be proven, RTSS alone held the game once it listed it. rtss_decide.h rtss_decide now counts the polls in a
row where RTSS lists the game, the profile holds a limit of this run (not "none"), a picture went out within 200 ms
and the hold is not shown; at RTSS_UNPROVEN_POLLS (60, 30 s) it puts the profile back and RTSS is out for the run
(RTSS_FAIL_UNPROVEN, "RivaTuner Statistics Server never showed it holds the game"). A minimised window, RTSS not
hooked, a want of no limit, a kept-out want or a poll that shows the hold start the count again. rtss_limit.c logs the
give-up, rtss_limit_state returns 3 for it, so the menu says RivaTuner does not limit the game and the game does, and
rtss_out_of_limit counts it, so a limit set in RTSS itself is reported as a second limiter. The comment above
rtss_decide, rewritten for the rule, is wrapped at 120 columns and no longer cites rtss_fresh, which does not exist.
tests/rtss_limit_check.c checks each sign that never comes (given up at the 60th poll, once, for the run), the polls
that do not count and a shown hold restarting the count; tests/rtss_worker_check.c unproven_run checks it against the
real worker. docs/architecture.md, docs/building.md and nx2navi.ini.example describe the rule and the remaining window
of two limiters before it.
This changes when the game takes the limit back from RTSS, beyond the approved rules: an RTSS whose hold never shows
in its shared memory (a version or setting that differs) is now left out after 30 s and the game's limiter holds
alone, as with rtss = 0, where it held the frames beside the game's limiter before. Not reproduced before the change.
Checks that passed: tests/rtss_limit_check.py (41 of 41), pass_cc_check.py --wall on rtss_limit.c,
tools/check_content.py --staged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The review found that the worker read rtss-profile.txt only on its first poll with the hooks library, which it loads
only for a limit, so a start with frame generation on, with the driver's low latency on from the first present, or
with NX2NAVI_RTSS=0 never put back a killed run's limit: RTSS then went on limiting the game at that value (counting
the generated frames too under frame generation), and the log and the menu reported it as the player's own limit
beside the game's limiter. rtss_limit.c worker now looks at the state file on its first poll that finds RTSS running
(left_start): a limit puts the profile back with the library it loads anyway, as before; frame generation and low
latency load the library for that one restore (restore_left, which now takes the line found); NX2NAVI_RTSS=0 keeps the
thread read-only and logs that the file holds the game's limit from a run that did not close and that a start with
RTSS let in puts it back. A restore the library could not be loaded for waits for the first poll with the library.
tests/rtss_worker_check.c adds kill_restart_framegen (the next start asks frame generation first: the profile is
removed, no limit written, the line gone) and kill_restart_setting (NX2NAVI_RTSS=0: no library loaded, the profile and
the line stay, the log says so). The rtss_limit.c header, docs/architecture.md, docs/building.md and
nx2navi.ini.example say so, and the ini text no longer says the game alone paces movies under RTSS.
Not reproduced before the change. Checks that passed: tests/rtss_limit_check.py (40 of 40),
pass_cc_check.py --wall on rtss_limit.c, tools/check_content.py --staged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The review found that rtss_decide.h rtss_target writes no limit only while a movie runs faster than the play limit, so
at the default limit of 60 a 60 fps movie leaves 60 in RTSS's profile and RTSS holds the movie beside the game's pacer.
Its comment said RTSS at the movie's rate would space out the frames that catch up after a late frame, and README.md
("one limiter at a time") and docs/architecture.md read as if every movie under RTSS were the pacer's alone. The
approved rule writes nothing to the profile at movies when the limit is 60 or more, so the code stays: rtss_target's
and rtss_pace_period's comments now say that at the movie's own rate RTSS keeps holding it and that whether its
limiter lets the frames that catch up through is not measured, README.md drops "one limiter at a time", and
docs/architecture.md lists the movie at 60 among the exceptions to one limiter. tests/rtss_limit_check.c pins a movie
at 60 under a limit of 60: no write, the profile keeps 60, held again after it.
No behaviour changes. Checks that passed: tests/rtss_limit_check.py, tools/check_content.py --staged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
docs/architecture.md said the pacer holds nothing while RTSS holds the limit, through movies and minimised windows,
that the pacer stands aside once RTSS lists the process, that RTSS fails at 1.2 times the limit over six polls, and
that a killed run leaves its limit for the next run to take as the player's. The one-limiter and RTSS paragraphs now
name the pacer's fallbacks (before the first host present, a movie, 200 ms with no host present, a limiter seen
letting frames through, any failure) and its 240 ceiling beside RTSS, the settle rule, a movie's profile, the proof
RTSS must give before the pacer stands aside, the 1.05 rule over three new periods, the rounding down, and the state
file with rtss_limit_crash. nx2navi.ini.example's rtss lines, README.md's frame generation item, docs/building.md's
rtss_limit_check and frame_step_check paragraphs and rtss_limit.c's header follow, and the comments at main.c
crash_handler's and dispatch.c fatal_end's rtss_limit_crash say when RTSS's library is still called there (no line in
the state file, never on RTSS's own thread). No code changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
kernel.c's preemption stub has two bodies since 00f06e66: kern_ap_stub_ymm saves YMM0-15 with vmovdqa and is chosen only when ap_init's cpu_keeps_ymm() finds AVX, OSXSAVE and XCR0 bits 1 and 2, and kern_ap_stub_xmm serves every other processor. tools/check_isa.py's DISPATCHED listed only sha256.c's blocks_ni, so it took the YMM body for an undispatched AVX function and stopped every tools/build_game.py --cpu v2 build. The entry names that check. Players' builds (make_game.py) run no such check and were not affected.
Reproduced before the change: kernel.c built with the ucrt64 clang at -march=x86-64-v2 failed tools/check_isa.py with "kern_ap_stub_ymm ...: vmovdqa x32, vzeroupper x1", and passes now. Checks that passed: the new tests/check_isa_test.py (kernel.c and sha256.c built with -march=x86-64-v2 and without -march pass; an AVX function not in DISPATCHED still fails; it fails before the change) and tools/check_content.py --staged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
tools/check_platform.py scanned the raw text of each shared runtime file and knew nothing of preprocessor branches, so the Win32 use that input.c, mods_probe.c, rtss_limit.c, vk_cache_file.h, vk_dlaa.c, vk_dlssg.c, vk_dump.c, vk_ffx.cpp, vk_ffx4.cpp, vk_fg.cpp, vk_fg4.cpp and vk_pipeline.c keep behind #ifdef _WIN32 made it fail on every run, at f1a2a64e already: a check that always fails guards nothing. It now leaves out the lines of a Windows-only branch (#ifdef _WIN32, #if defined(_WIN32), #if _WIN32 up to their #else, #elif or #endif, the #else of #ifndef _WIN32 or #if !defined(_WIN32), and conditionals nested in them), found on the text with its comments blanked. Every other branch is still scanned, #elif defined(_WIN32) and #if defined(_WIN32) && X among them, which can fail the check but never lets a use through. docs/building.md lists the check and its test under "Checks".
Reproduced before the change: the check exited with 1 and these 12 FAIL lines on 2f640fb8; it now exits with 0. Checks that passed: the new tests/check_platform_test.py (guarded uses pass, unguarded ones fail, the repository's runtime passes; it fails before the change) and tools/check_content.py --staged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Steam shortcut's --play runs before the window's single-instance lock and checked only whether the game was running. Started while the window rebuilt the game, installed an update or built the mods' code, it ran mods.prepare into the folder the job was reading and started the old ocarina.exe, and the job then failed at the swap with "ocarina.exe is in use" (an update's install left the new launcher on the old build); during the shaders step, make_game.py's own run of the exe made the shortcut log "already running" and do nothing visible. play_only now tries the launcher folder's lock and lets go of it at once: when another process holds it and data/job-running.json names a job (jobs.running_job, which leaves the marker in place), it logs that the launcher is busy, says which job to wait for in a message box and does not start the game. A marker that a stopped launcher left does not stop it, since its lock went with its process, and neither does the window open without a job.
Not reproduced before the change in a game run: found by reading the code. Checks that passed: tests/launcher_test.py (216 tests, a new one for a held lock with the job's marker, a leftover marker with the lock free, and the window open without a job, which fails before the change) and tools/check_content.py --staged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
play_only, the --play path of the Steam shortcut, logged only "the game ended (code N)" in launcher.log: it read no FATAL line, added no note to the game's log and showed nothing, so a game that ended with 70, 71, 72 or a Windows status left the player with no word of why (as when Steam starts it while the window replaces a save, and it ends at once with "another copy of the game is running"). The 7b0dbeb1 change that logs every end touched the window's watch only. play_only now follows the run with GameRun, the Restart's copies too, and takes the same game_end as the window: the line in launcher.log, the note in the game's log, and a message box only for an end worth one (a FATAL line, 70, 71 or 72, a Windows status; not 0, nor 1 from Task Manager's End task). The logs are written before the box, which waits for OK while Steam still counts the game as running.
Not reproduced before the change in a game run: the audit's probe showed it with a stand-in process. Checks that passed: tests/launcher_test.py (214 tests, a new one for the Steam shortcut's ends with codes 70, 0xC0000005, 0 and 1, which fails before the change) and tools/check_content.py --staged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The launcher read the game's FATAL line only after codes 70 and 71, so a run that ended through vk_device.c vk_device_lost_check (code 72, as in the AMD device losses of 2026-11-12) showed a bare "code 72" with no cause. 72 now joins 70 and 71 in FATAL_CODES and has a text of its own, which stands without a FATAL line because the loss's watchdog (vk_device.c lost_wait_exit) can end the run before that line is written.
The game's Restart (gfx_present.c gfx_window_closed) starts the exe again and ends the process the launcher started with code 0, and the launcher took that 0 as the run's code. A restarted copy that ended with 70, 71 or 72 was logged as an end with code 0 and its FATAL line was never shown; one that was killed or hung got a note saying code 0 in its log. Once the process it follows has ended with 0 while the exe still runs, the launcher now finds the copy by its image file (winsys.game_copy, compared as a file so that another install's game is not taken), holds a handle to it and takes its exit code; a further Restart is followed the same way. A copy it could not find ends with its code logged as not known. After code 0 or an unknown code, a FATAL line in a log written since the start can only be such a copy's, and it is shown as one; a log older than the start (a run that ended before it opened its own) is not read. A log cut at its 64 MiB cap (main.c log_sink) wrote its end lines to stderr only, and no longer gets a note saying it has no line of its own end. The end's handling is one function, game_end, for the Steam shortcut's play to share.
Not reproduced before the change in a game run: the audit's probes showed each of these ends with stand-in processes and logs. Checks that passed: tests/launcher_test.py (213 tests, new ones for code 72 with and without its FATAL line, the followed copy, a copy not found, a FATAL line after code 0 and a log older than the start, the cut log, and game_copy on a sleeper compiled with the ucrt64 clang) and tools/check_content.py --staged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The review of the packaging guard (b4c21998) found that D-1's optional behaviour probe was left out without a reason:
check_built compares only nx2navi_xlate.id with the checkout's sources, so an old exe beside a current .id still
passed, and while the exe build record waits (G-12), a probe of the exe is the only landable check on the exe itself.
It also passes the release scripts' folder, as that translator declares 40960 entries and clamps to 40959.
tools/xlate_smoke.py gains pool_check(exe): it sends a hand-assembled fragment shader that reads a texture handle from
an input (IPA R4 = a[0x80]; TXQ.B R0, R4; EXIT), which the translator reads from the texture pool array, and refuses
an exe that does not run or answer, whose res.json texture pool entry (pool 1) has another array length than
tools/xlate/Program.cs TexturePoolLength, or whose SPIR-V lacks that array or a GLSL.std.450 UMin by length - 1
(spirv_clamps reads the module itself, no disassembler needed). xlate_smoke.py runs it last and takes --exe.
make_launcher.check_xlate runs pool_check on the exe after check_built on Windows, still before anything is
downloaded, built or deleted.
Not reproduced before the change beyond the audit's probe. On this PC, pool_check passes on work\xlate_6866a13e (and
make_launcher.check_xlate on that folder), refuses the 0.9.2 translator (identity 4d051299) with "declares the texture
pool with [32768] entries, where its sources say 40960", also through check_xlate beside a current .id, and
xlate_smoke.py --exe passes on work\xlate_6866a13e. tests/xlate_package_check.py now checks spirv_clamps on a module it
assembles, that pool_check and check_xlate refuse an exe that does not run beside a matching .id, and that a
translator built in build/xlate passes when there is one; it passes. docs/building.md names pool_check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The review of the torn-file fix (43ac5ae3) found that pb_index also stops at a malformed record in the middle of the
file, so pb_init cuts the file back to it and drops the whole records after it, while its log line and the comment
above the cut spoke only of a record half written. It also found that tests/pb_torn_check.py covered only the index
walk, not the keep-and-cut that is the fix. The decision after the walk moves from pb_init into pb_keep(path, good, len),
which returns the length to go on with (len when the records fill the file, good after cutting it back) or 0 when the
file cannot be cut and starts empty; its log line now reads "<path> ends inside a record or holds a malformed one at
byte <good>; <n> bytes from there dropped", and the comment and the start-empty reason say the same. Behaviour is
unchanged.
pb_torn_check.py now also cuts pb_keep out of vk_pipeline.c and runs it on real files, with plat_file_truncate a
stand-in that cuts with the C library: a torn file is cut to its whole records and logged, a second walk reaches the end
of what is left, a record appended after the cut is read back with the others; a malformed record in the middle is cut
off with what follows; a whole file is left as it is, unlogged; and a file that cannot be cut gives 0 and stays as it
was. The check passes, vk_pipeline.c compiles, and its -Wall -Wextra warnings are the four it had, none in pb_keep or
pb_init. docs/building.md names pb_keep and what the check now covers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The review of the carry refusal (a2de7eb7) found that the "Translator updates" bullet still said a shader the new
translator has not translated yet uses the previous one's for the whole session, with no wait at the start or in play.
Since that commit, a previous translation whose texture pool array has the earlier length (32768 entries, the 0.9.2
translator's) is not used: such a shader is translated again, in the boot prewarm when the boot names it, otherwise at
first use, with its draws skipped meanwhile and a compute dispatch waiting for the translation. The bullet now says so,
names gfx_shader.c carry_usable, and says that a program the current translator fails keeps even such a translation
(carry_last). The bullet is rewrapped at 120 columns.
Documentation only; tools/check_content.py passes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The review of the carry refusal (a2de7eb7) found that it also took the old translation away from programs the current
translator cannot translate. Before it, carry_find served the carried translation before any translation ran; after
it, a carried translation with the earlier texture pool length was refused, the translation ran and failed, and get_one
marked the key failed for the session (xlate_worker marked its wait failed), so the shader's draws were skipped, or a
compute dispatch left out, for the whole session, where 0.10.1 drew them with only the textures numbered from 32768 up
wrong. That contradicted docs/architecture.md ("A program the new translator refuses keeps its old translation") and
the carry pass's "its previous translation stays in use".
gfx_shader.c carry_last now runs where a translation failed (get_one, xlate_worker, and get_async_one's synchronous
fallback): carry_find with the new short_ok argument set passes carry_usable by, so the refused translation enters the
memory cache, where the lookups' memory step serves it from then on; the key is not marked failed and the wait is
cleared as for a success. The first four are logged with their key. Every other caller passes short_ok 0.
pool_short_note still counts such a shader for vk_texture_register's warning but no longer logs it as a translator in
use older than the runtime, and the refusal's log lines say that a shader the current translator fails keeps its old
translation. With this, the carry pass's "its previous translation stays in use" is true again for these programs, and
keeping their previous entries (the pass does not prune a failed input's) is what this needs.
Not reproduced before the change. tests/carry_pool_check.py now also cuts carry_last out of gfx_shader.c and checks that
it serves the refused translation into the memory cache, which the memory lookup then finds, serves a usable one
unlogged, returns NULL with none and still refuses another stage, and that pool_short_note counts a carried shader
without logging it; it passes, every runtime file compiles, and gfx_shader.c has the same 7 -Wall -Wextra warnings as
on stability-pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The test expected a store exclusive to fail after another thread changed the value with exclusive pairs and changed it
back (ABA), as the console's monitor would. runtime/cpu.h's monitor (EXCL ldxN/stxN, ldxp128/stxp128) compares the
memory with the value loaded, so a value restored to the same bits passes by design, and the test has failed since
both came in with the base import. It now checks both cases the helpers define: one change fails the store (status
1), a change and its undoing does not (status 0), for the 32-bit, 64-bit and 128-bit forms, with the control and the
contention runs as before. Its docstring, a comment and docs/building.md's row say that the monitor does not see the
change-and-restore case. No runtime change.
The test passes under .venv: the one-change cases fail the store, the two-change cases succeed, and every contention
counter is exact.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With NX2NAVI_PIPE_BINARIES=1, a process ended during the autosave's append (a kill, a crash, a fatal on another
thread) or a disk that filled left the file ending inside a record, and pb_init then started empty, dropping every
whole record (up to the 1 GB limit). After a failed append pb_flush also left the torn bytes in the file while
file_size stayed, so every later record's offset was off by them. The index walk moves into pb_index, which returns
where the last whole record ends; pb_init keeps the index of those records and cuts the file back to that offset with
plat_file_truncate after it closed its handle, and starts empty only when the cut fails. pb_flush closes the read
handle, cuts the file back to file_size and opens it again when an append fails (plat_file_truncate opens the file
alone, so it fails while another handle is open); pb_read refuses to read when that reopen failed.
Not reproduced before the change; the option is off by default. tests/pb_torn_check.py (new) cuts the record layout
and pb_index out of vk_pipeline.c and walks files of whole records, with a last record cut short at many lengths and
with a malformed record; vk_pipeline.c compiles with no new warnings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
build_xlate.py --id-only wrote an nx2navi_xlate.id for whatever exe sat in the folder, from the sources as they are,
so make_launcher's guard (check_xlate, which compares only the .id) passed an old exe beside a fresh .id. Nothing
calls the option; it is gone, and only a build writes an .id. make_release.check_translator compared build/xlate's .id
with build_xlate.identity(), which hashes the tree the last build prepared there, so a patch or vendor change since
that build passed unseen; make_appimage.py and make_kit.py checked nothing. The fresh-prepare identity moves from
make_launcher into build_xlate as source_identity(), and build_xlate.check_built(folder, exe) refuses a missing exe or
.id and an .id that differs from it. make_launcher, make_release, make_appimage and make_kit stop on its reason, each
before its downloads, builds or deletions: make_launcher's check moves from build_app to the top of main, before the
--out folder is deleted and the toolchain lock is resolved. A translator folder built from the current sources, as the
release scripts pass it (work\xlate_6866a13e), passes as before.
Not reproduced before the change beyond the audit's probes. tests/xlate_package_check.py (new) checks a matching
folder, missing files, another identity and a stale build (refused although identity() over its own tree equals its
.id), that --id-only is refused, and that make_launcher, make_release and make_kit stop on a foreign translator, the
kit before any download; check_built passes on work\xlate_6866a13e.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
plat_child_read returned -1 both for a broken pipe and for a child that sent nothing for PLAT_CHILD_READ_MS (120 s),
and svc_request retried any failure once on a fresh child. The translator is deterministic, so a program it hangs on
hangs the second child too: a compute shader, which the replay thread looks up synchronously (vk_exec_draw.c
shader_for), held the game for about 4 minutes instead of 2. plat_child_read now returns -2 on the timeout (win32.c and
linux.c), child_exchange_raw returns 1, 0 for a broken pipe or a child that could not start, and -1 for the timeout,
and svc_request stops the child and gives -1 without asking again; a dead child is still restarted once.
translate_one fails such a request with its own reason, keeps its job and code for diagnosis and deletes whatever the
stopped child wrote. The carry pass's child runs at idle priority, so a busy machine can starve it that long:
carry_exchange does not resend after a timeout either, and carry_translate counts it as a failed input, not as an
unavailable translator, so one slow program does not count towards the three that stop the pass. platform.h lets a
build set PLAT_CHILD_READ_MS.
Not reproduced before the change (no translator hang appears in the available logs). tests/child_timeout_check.py
(new) builds the real child and request functions with a 300 ms timeout: a silent child gives -2 and costs one
timeout with one child started, an exiting child is restarted once, an answering child gives its line. Every runtime
file compiles, with no new warnings in gfx_shader.c and win32.c.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Installs updated from 0.10.0 or 0.10.1 hold translations of the 0.9.2 translator, which declares the texture pool with
32768 entries and clamps every handle to slot 32767. The carry lookups (gfx_shader.c carry_load, carry_find_iid) served
such a translation for the whole session, so every texture the game numbers from 32768 up (Ocarina's pool has 33068)
was drawn with whatever slot 32767 held: the see-through ground of issues #569 and #824 stayed on those installs after
the update. carry_usable now refuses a previous translator's translation that has a texture pool array (reflection
pool 1) of 32768 entries; the lookup goes on to the next previous identity and then to a translation under the current
translator, so the boot prewarm translates the shaders it names on the boot screen and the rest are translated at first
use. The first refusal is logged, and the saves and the exit log how many there were. get_one now checks its failed
keys before the previous translators' disk entries, so a shader whose translation failed does not read a refused entry
from the disk at every call.
Not reproduced before the change. tests/carry_pool_check.py (new) cuts the carry lookups out of gfx_shader.c and checks
that an earlier-length translation is freed and passed over, also in the owned branch, while others are served;
gfx_shader.c compiles with no new warnings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The review found that astc_trim_check, evo_peek_check, heap_lazy_copy_check and gen_wrap_check were in neither the
pass's test matrix nor the docs, so a later change to the code they cover would not know to run them. Each now has a
sentence in the "A change to X passes python tests\Y.py" form: vk_astc.c's scratch trim with vk_defer_buffer_try,
vk_evo_peek.h with vk_exec.c vk_exec_held_ready, memory.c mem_copy_readable with the lazy heap, and vk_memory.c's page
write generations.
Docs only. Checks that passed: check_content --staged; the four checks pass with system Python.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The review of c05e6528 found a window in perf.c ft_frame: it loads walk_t0 and then walk_t1, while perf_census_walk(1)
stores walk_t1 = 0 and then the new start. A walk that starts between the two loads leaves ft_frame with the previous
walk's start and an end of 0, so perf_census.h census_charge took that walk as running since then, the whole frame as
overlapped, and moved all its replay and unattributed time to "census". The window is a few nanoseconds, but the error
is a whole frame. A walk takes 100-260 ms, so census_charge now returns 0 for a walk seen running for longer than
CENSUS_WALK_MAX_NS (2 s).
tests/census_charge_check.c gets a torn read (a start 10 s back with an end of 0), a walk running for 1.9 s, which still
counts, and one running for 2.001 s, which does not; its random frames now reach walks more than 2 s old and check the
moved time exactly (the overlap capped by the frame's room and its replay and unattributed parts) instead of only its
bound. Built against the header before this change, the check fails the torn read, the 2.001 s walk and the first such
random frame; with it, it passes. docs/building.md names the new case.
Diagnostics only: the census part exists only with NX2NAVI_MEM_CENSUS = 1. Not reproduced in a run (the window is a
few nanoseconds). perf.c compiles with the dev flags and adds no -Wall -Wextra warnings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- nx2navi.ini.example said the stutter map is written every 10 minutes and at exit; since 7b0dbeb1 it is every 5
minutes of play (stutter_map.c SM_REPORT_NS), at a focus loss in play and at exit, and since 2f640fb8 a run of
consecutive long frames counts as one hitch with their summed time. The paragraph now says both.
- docs/building.md had no paragraph for tests/freeze_hold_check.py (0e0cfe08), while each other header-alone check has
one: it now says what a change to runtime/freeze_hold.h or vk_memory.c freeze_pass must pass and what it checks.
- vk_texture.c released_cap_bytes named "a thirty-second of the installed memory" as the source of the bound even when
plat_mem_info gave no size and the bound fell back to 1024 MiB; that case now reads "the default without the
installed memory's size".
Text only. check_content passes; freeze_hold_check passes; vk_texture.c compiles with the dev flags and with -Wall
-Wextra with the one warning it had before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
perf.c rt_knob reads "0" as off, "ab" as the A/B blocks and everything else as on, without a word: "cache_die = off",
"crash_filter_guard = false" and "one_per_core = 0 ; x" all read as 1 (the audit's probe, Fv/knob.exe, cut rt_knob out
with cfg.c: three 1s and no log line). A player who wrote such a value meant the opposite and had no way to learn it
from the log.
rt_knob now logs "cfg: NX2NAVI_<name> = '<value>' is not 0, 1 or ab: read as 1" the first time it reads such a value
for a switch. The value still reads as 1: reading words as 0 changes what a written setting does and waits for
approval with F-8. Most of the 109 call sites keep the result in a static but some read it per call, so the warned
names are kept in a table of 32 pointers (the names are string literals) filled by compare-and-swap; 0, 1 and ab pay
only one more string compare.
New tests/rt_knob_check.py cuts rt_knob and its table out of perf.c and builds them with stand-ins for the settings and
the log: 0, 1, ab, empty and unset read as before without a line; off, false and "0 ; a note" read as 1 and log once
each however often they are read. docs/building.md describes it. The fault was shown before the change by the audit's
probe; rt_knob_check passes, and perf.c compiles with the dev flags and with -Wall -Wextra without new warnings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With mem_census = 1 and trace = perf, vk_memory.c census_main walks the address space for 100-240 ms on its own
thread, holding the process's address-space lock. The replaying thread's write-watch queries wait for that lock
("mem: slow write-watch query: 20-34 ms ... 0 pages written"), and ft_frame charged the frame to "replay": in the
0.10.0 fresh session (nx2navi.1.log, 7,974,927 bytes) 63 of the stutter map's 66 replay hitches sat beside such a
walk, 49 of them at frames 600N+1..3. The presenting thread's own 600-frame memory report (10-17 ms, timed in
vk_mem_census since b81a9561) went to "unattributed". And at frame 3600N, census_check walked on the presenting thread
and the same frame's heap_log started census_main's second walk.
- perf.c perf_census_walk brackets census_main's walk (atomics); ft_frame moves the part of a frame over 25 ms (or a
stutter-map candidate) that overlapped the walk out of the replay part first, then out of the unattributed part,
into "census". The rule is runtime/perf_census.h census_charge, capped by the overlap and the frame.
- A new cause "report": vk_mem_census feeds the report's time (perf_report_part), and so do perf.c's memory
snapshots and its 600-frame sizes lines; the next frame takes it, so the overlap rule no longer has to infer it.
The cause list changes together: perf.c FT_C_* and ft_cause_name, stutter_map.c SM_CAUSES and cause_short,
tests/stutter_hitch_check.c names[].
- census_check records the frame it walked (perf_census_walked_frame); heap_log does not start census_main for that
frame, so frame 3600N walks once. A frame stamp, not a time window, since prof_commit_census can fail and leave
perf_note_wc uncalled.
- The "mem: process" line gives the walk's start and end on the run's clock and its length, so a play-test with
mem_census = 0 can tell the walk from the presenting thread's report as the cause of the 600N+1 hitches.
New tests/census_charge_check.py builds runtime/perf_census.h alone: no overlap, partial, contained and still-running
walks, the charge from replay first, capped by the overlap and the parts, and 100,000 random frames in which the census
part never passes the frame; docs/building.md describes it. Diagnostics only: NX2NAVI_MEM_CENSUS defaults to 0, and
nothing in gameplay, pacing or the save changes. Not reproduced before the change (it needs a game run). The pass's
known-issues table, which should say that hitch counts are taken with mem_census = 0 and trace off, is not in the
repository. census_charge_check, stutter_hitch_check and stutter_map_check pass; every runtime file compiles with the
dev flags, and perf.c, stutter_map.c and vk_memory.c add no -Wall -Wextra warnings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The perf lines could not see pacing. In the 0.10.0 fresh session (nx2navi.1.log, 7,974,927 bytes) all 666 windows read
"pacing 0%" and "bound: cpu" and all 70 slow-frame lines "pacing 0.0 drain 0.0", while 610 windows had a 16.x ms
interval at fps_limit 60 under the game's own limiter. The pacer's wait happened where perf does not count it:
vk_backend.c present_image's wait for the present thread to take the previous picture was untimed, perf_end drops
waits on any thread but the presenting and replay ones (a game may acquire its window image on another), and the
acquire's GPU wait was counted twice, as pacing around b->fence_wait and as a fence wait inside vk_sync_fence_wait
(F-7-04).
- host.h: PERF_HANDOFF, the presenting thread's wait to hand the present thread the next picture, timed in
present_image from under pl (where pending is read) and kept in PresentJob.handoff_ns. perf_end_any counts a wait
on any other guest thread into a sum that perf_present adds to the frame before ft_frame reads its parts.
- nvn_api_obj.c nvnWindowAcquireTexture: the pacer's sleep is timed with perf_end_any; the GPU wait counts only as
the fence wait it is; one line names the threads that acquire and present once the first present is known.
- vk_backend.c present_main: the TRACE=present line adds the present call's time (vkQueuePresentKHR, under the queue
lock, where an overlay's frame limiter sleeps) and the job's hand-off wait; with trace=perf, a line per 60 presents
gives the present thread's blit and submit, paced wait, present call (avg, max), time past target and the hand-off.
- perf.c: "handoff" in the window line's shares and the slow-frame line, "hand-off" in the worst-frame lines and as a
cause of its own for frames over 25 ms and the stutter map. The "bound:" rule stays as it is until play-test numbers
exist.
- The cause list changes together: perf.c FT_C_* and ft_cause_name, stutter_map.c SM_CAUSES and cause_short,
tests/stutter_hitch_check.c names[] (now sized from SM_CAUSES), and tools/stutter_map.py, whose cause and hitch
patterns now take a hyphen. flight.c's frames.tsv gets a handoff_ms column (blocked_names checked against PERF_N),
and tools/flight_view.py lists it.
- tools/perf_summary.py reads the hand-off share, the present-thread lines and the TRACE=present lines, and prints
percentiles of the present interval, paced wait, time past target, present call and hand-off.
New tests/perf_summary_check.py makes lines with the runtime's format strings (checked against the C sources) and
checks the percentiles, the window averages and the hand-off share, and that older lines without these fields still
parse; tests/stutter_map_check.py gets a hand-off hitch and area cause, which the old patterns dropped. Diagnostics
only: no wait, pacing or presentation change. Not reproduced before the change (it needs a game run with trace=perf).
perf_summary_check, stutter_map_check, stutter_hitch_check, flight_flash_check and frame_step_check pass; every
runtime file compiles with the dev flags after the host.h change, and the changed files add no -Wall -Wextra warnings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A session of 2026-11-13 grew from 683 to 1095 OS handles in 11 minutes, rising at every area load and never falling,
while the guest's own handles stayed at 116-122 and the threads flat; the VMA block count fell back while the handle
count did not. The log could not show it: the 600-frame "mem: sizes" line had only the guest's handles, and nothing
told which kind of handle grows.
kernel.c kern_sizes now adds "process handles" (plat_handle_count, one system call every 600 frames under trace=perf)
beside the guest's "handles". platform.h gets plat_handle_census: on Windows the system's extended handle table
filtered by our process id, with the type names from NtQueryObject's ObjectTypesInformation; on Linux the
/proc/self/fd links grouped by kind. It never opens, duplicates or names a handle (a name query can block on a pipe).
With NX2NAVI_HANDLE_CENSUS=1 (default 0, read at start) and trace=perf, perf.c starts one long-lived thread that the
600-frame report wakes; when the count grew by 16 or more since its last census it logs "mem: handles frame N: T in
all (+D since the last census): Event a (+x), ...". The census reads a few MiB of the system's table in 2-5 ms, off
the drawing threads; one thread for the run keeps a new thread's own handle out of what it counts. New cfg rows:
HANDLE_CENSUS in known[], sections[] (diagnostics) and metas[] ("0", "0|1", restart), and an nx2navi.ini.example
entry.
New tests/handle_census_check.py builds the platform layer alone: 20 events and 5 sections show as Event +20 and
Section +5, the total stays within 2 of GetProcessHandleCount, the figures return once they are closed, and kinds
past the room given go into the last entry; docs/building.md describes it. Not reproduced before the change (the
growth needs a game run). handle_census_check, sync_wake_check and the cfg row check pass; every runtime file compiles
with the dev flags, and perf.c, kernel.c, win32.c and cfg.c add no -Wall -Wextra warnings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Rereading the fixes for the review showed lines past the 120 columns the files keep to: the RTSS paragraph of
docs/architecture.md ran one line to 176 columns after its hooks library sentence was replaced, rtss_limit.c had three
lines just over (the creations and removals counters, the removed line, find_rtss's kept-out line), and
tests/rtss_worker_check.c three. They are wrapped; no text, log line or check changes.
rtss_limit_check passes 27 of 27, check_content passes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The review found that docs/architecture.md's list of exceptions to the one-limiter rule leaves one out: when RTSS is
out of it for the run because its profile cannot be written (no administrator rights) or its hooks library does not
load, a limit the player set in RTSS itself (Global or the game's .cfg, a frame time limit, scanline sync) still holds
the game while the game's own limiter paces it. rtss_limit.c watch worked the second limiter out only for a kept-out
want, so neither the "two limiters" line nor anything else said so; only the "settings for the game" line showed the
values.
rtss_decide.h now has rtss_out_of_limit (kept out, or failed with RTSS_FAIL_READONLY or RTSS_FAIL_LIBRARY; a run the
frame count check gave up on is left out, since RTSS was seen not to hold the game), and rtss_two takes the failure.
watch gets S.fail and logs the two-limiter line for those runs too, and logs it again when the other limiter changes
(a failed run that then keeps RTSS out for low latency). The menu is unchanged: its two-limiter note (rtss_limit_state
4) stays for a kept-out want, and a read-only profile keeps its administrator note (state 2). Log only: no pacing
decision changes. The docs' exceptions sentence names the case and what the log and the menu show.
tests/rtss_worker_check.c readonly_two and library_two run it with a limit in Global; both fail on the code before
this change (no two-limiter line). rtss_limit_check.c's two() covers the failures. rtss_limit_check passes 26 of 26,
check_content passes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The review found docs/architecture.md claiming that a run kept out of RTSS from its first present never loads the hooks
library, its thread only reading RTSS's settings. That holds only for NX2NAVI_RTSS=0: once frame generation or low
latency is switched off, a limit is wanted, rtss_decide.h rtss_wants_hooks lets the poll load the library, and the
limit goes into the profile as usual (tests/rtss_worker_check.c kept_lowlat_then_limit). The paragraph now says that
the thread reads only while RTSS is kept out, that a later limit loads the library, and that NX2NAVI_RTSS=0 keeps the
thread read-only for the run; it also says the profile gets back what it held before the run changed it. The same claim
is corrected in rtss_limit.c's header and read_settings comments, in rtss_decide.h rtss_wants_hooks's comment, and in
find_rtss's start-up line for a kept-out first want, which now says the thread only reads while RTSS is kept out.
Docs, comments and one log line's wording: rtss_limit_check passes 24 of 24, check_content passes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
docs/architecture.md mentioned the pacer only inside its low latency paragraph and RTSS nowhere. It now has the pacer
(the limit counting drawn frames, the 240 ceiling, movie rates, the slots and their catch-up, the present thread's
wait and pace_smooth, the acquire's waits, the step snapped to the paced rate), the one-limiter rule as the goal with
the exceptions that stand today (pace_smooth under RTSS, DLSS Frame Generation's Reflex beside the pacer, no limit at
all from the pacer while RTSS holds it through movies and windows with no present, a limit set in RTSS itself while
RTSS is kept out), RTSS's part (the lookup on its thread, the profile write and read-back, when the pacer stands aside
and when it keeps the limit, the kept-out runs that only read RTSS's settings, the restore on orderly exits and what a
kill leaves), and how to measure pacing (the present and perf traces, perf_summary, PresentMon as the reference, the
runtime's own hitches). The changes that wait for approval are not described as done.
nx2navi.ini.example's rtss paragraph adds low latency, and the second limiter a limit set in RTSS itself makes with
rtss = 0, frame generation or low latency, which the log and the settings menu now point out. README.md's frame
generation item ends its sentence on RTSS with what it does and the same note.
Docs only; check_content passes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The worker read RTSS's shared memory, decided and wrote the profile in one loop over file statics, so its decisions
could be checked only against a running RTSS. rtss_decide.h now holds the parts that make no system call: rtss_parse
reads the shared memory's header and this process's entry (bounded by the memory's size and 4096 entries, as before),
rtss_decide takes one poll's view (the want, whether it is still current, a closed run, the hooks library, the entry)
and the state between polls (RtssState: the limit applied and the one refused, whether the run changed the profile,
the frame count, the failure) and returns what to do and whether RTSS holds the game, and rtss_poll carries that out
through the profile calls rtss_limit.c hands it (apply and put_back, which keep their I/O and log lines). The worker,
rtss_limit_restore and the menu state read the same state.
No decision changes: the order of the rules, the immediate write before RTSS lists the game, six polls over 1.2 times
the limit, a write per movie and per switch of low latency all stay as they are. The rules that wait for approval are
not in it (the pacer keeping movies and windows with no host present, Vulkan flags, settling and a fresh period
before standing aside, rounding the limit down, the state file).
tests/rtss_worker_check.c gains nine scenarios that pin those decisions against the real worker (a read-only profile,
a refused limit, the frame count rule at 144, 69, 73 fps and unlimited, RTSS quitting, a hooks library that does not
load, low latency switching, a movie); the logs of all 23 scenarios are the same, line for line, before and after this
change. tests/rtss_limit_check.c checks the same decisions on rtss_decide.h alone, with a fake RTSSSharedMemoryV2 for
the reader (a bad header, short entries, an entry past the memory or past the 4096th) and a fake profile behind
RtssOps; mutating the frame count's polls or slack, the refusal, the library failure or the clear of a refused limit
makes it fail. docs/building.md describes the check. Every runtime file compiles; -Wall adds no warning;
frame_step_check passes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The session of 2026-11-13 ended 8 s after its window lost the focus, after 7 minutes of play, with none of the game's exit lines: no frame-time summary of its last period, no stutter map of its last minute and no growth ranking at all, as the ranking came every 10 minutes. When the window loses the focus in play, the present thread now writes the frame-time summary so far (starting a new period), the stutter map and the growth ranking at its next present, at most once a minute; formatting only, nothing asks the device. The growth ranking comes every 2 minutes of play instead of 10, the stutter map every 5 instead of 10.
A process that ends through exit() rather than plat_exit now writes the log thread's queue last, after the frame-time summary's exit handler, instead of losing it.
The launcher logged a game's end only for a nonzero code, so the session's end with code 0 left no line anywhere. It now logs every end of a game it started, and when the game's log has no line of the game's own end (the window's close, the game's ExitProcess, a timed run's end, a FATAL or exit line), it notes the end there too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>