No menu row sets coop_beta; it lives in nx2navi.ini under [coop] (NX2NAVI_COOP_BETA) and takes effect at once. Co-op
itself is unchanged: coop = 1 still runs a session with or without the tab. The notes and the co-op guide say how to
show the tab.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The draft notes for the release after 0.7.1 become the notes of 0.8.0: every change since 0.7.1, the install and
update steps, the requirements (mesh shaders are no longer required, with the fallback untested on such a card), the
known issues and the thanks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On Linux every driver got shadow storage (copies of guest memory beside it), which exists for amdgpu, where importing guest memory costs the write protection of its pages. NVIDIA's own driver imports without that cost, so there the copies are only the slower path: in Kokiri Forest on 0.7.1 (RTX 4090) imports ran at 51.9 frames a second and the copies at 27.4. Until now only the AppImage's play.sh knew, by setting NX2NAVI_SHADOW=0 when NVIDIA's kernel driver was present at build time, so a game started any other way got the copies, and a PC with that kernel driver whose game ran on another card got imports where it should not. The game now chooses by the driver of the device it runs on, play.sh no longer sets the variable, and NX2NAVI_SHADOW=1 or 0 still decides. The driver is asked when the device is picked, before the storage is chosen.
Windows is unchanged: the device probe here reads "mem: mode mirror" with no shadow storage line, and the shadow line with NX2NAVI_SHADOW=1. The Linux path itself was not run: there is no Linux machine here.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The author of the pull request it was ported from closed that request on 2026-11-11 with the words that they give no
permission to use its code. The history (NX2NAVI_VA_REPORT, runtime/vk_vaddr.c, the stack walk it used and its notes
in the docs and the example settings) goes; the lost device's report keeps the breadcrumbs, the pass marks, the video
memory and the driver's fault information.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Brought onto the line with FSR 4, its frame generation and the debug menu. Where both sides had added to the same
place, both stay: the patch table keeps the pickup count and the free camera, the settings list keeps both sides'
names, the menu includes the co-op page and the debug menu, and the launcher builder takes the pipeline list and the
FSR 4 folder. Both sides had added the menu's typed-character event; one definition stays, with the window code that
passes characters outside the basic plane.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With it on, the game draws from a camera of the menu's instead of its own, in play and in cutscenes. The left stick moves it along its view and sideways, the right stick turns it, ZR and ZL raise and lower it, R makes it faster and L slower, and Link stands meanwhile; or the camera stays where it is and the pad plays the game.
It works inside the game's own camera update: a new patch site sends the instruction at which the frame's position, target and up vector are final to a host function, which replaces them for the camera that follows Link and the one the events direct, so the game draws, culls and loads detail for what the free camera sees. The camera of the interface's 3D models and the one the sound follows stay the game's. The set is off unless the menu switches it on. A teleport's arrival starts the free camera again from the game's view.
Tested in Hyrule Field with scripted stick input (turn, rise, strafe, with Link's position unchanged), with the pad playing while the camera stays, across a teleport to Kakariko Village, during the Kakariko arrival cutscene, and switched on by a click in the menu.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The Teleport tab lists every area of the game with its named start positions, read from the player's own game files: the warp songs' pads, both sides of the loading zones and the boss rooms among them. A click changes area the way the game's own doors do: during a short event of the game that only waits, the menu reserves the next area and start position in the game's data and asks the game's sequence for the change, so the area unloads and loads as in play, a first visit's cutscene plays and a boss room starts its fight.
The Cutscenes tab lists the game's event scripts by name and starts one through the game's event manager.
Tested from Hyrule Field to Kakariko Village, the Forest Temple, Kokiri Forest in the child's time, the bottom of Lake Hylia, Volvagia's room, and the pads of two warp songs, four of them in one run, with Link walking afterwards; the Kakariko arrival cutscene started by name.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With debug_menu = 1 (off by default; the Game tab has the switch) F9 opens a panel on the left edge in the
performance overlay's look, with the game in view beside it. ui/menu.cpp lays it out in the settings menu's place,
so its input and the game's blocked pad are the menu's own. Typed characters now reach the menu for its text fields.
Flags: the game's 11,292 on/off flags are read from its game data manager, and a click changes one through the
game's own function on the game's thread at its pad read (runtime/debug_tools.c dbg_tick), so the game applies it
at its next update as it does its own changes. The game knows a flag by the hash of its name only; the names shown
are found in the player's own event flow files, hashed and matched when the panel first opens (2,250 of them from
915 files in 0.2 s), and none is kept in the code. World: Link's position, and a speed factor from 0.05 to 8 that
multiplies the step the runtime gives the game each frame (measured 0.50 at 0.5x). Memory: a search of the heap
for a value of 1, 2 or 4 bytes or a float (about 2 s), narrowed by equals, changed, unchanged, went up or went
down, with a value to set at a place or to hold there every frame.
Tested through the window's own messages: F9 opened it, a click on a flag set that flag in the game, text typed
into the filter narrowed the list, and F9 closed it; a scripted run set and held a value and put it back.
Teleporting, a free camera and starting cutscenes are not in it: writing Link's position, or every copy of it in
the heap, moved him back within three frames, so they need the game's own warp, scene-change and event functions.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The author of pull request #353 closed it on 2026-11-11 with the words that they give no permission to use its code. Its port (3134f524) goes: the mark of a pipeline that declares the table (VkPipeInfo.gpa, vk_pipeline.c pipe_add) and of the part that draws with it (vk_mem_gpa_use in vk_exec_draw.c bind_resources and mo_emit), the sync of the table's pools in every such part's prologue (vk_mem_gpa_sync), the submission with a callback in the replay's place as it stood (vk_sync_probe_submit), and --probe-vkmem's read through the table with its shader (test_gpa_read, runtime/shaders/gpa_read.spvasm).
In its place, after pull request #551, which was written without that code: a shadow pool goes into the table and onto a list of the table's shadows (vk_memory.c shadow_table_add); the record of a binding of the table notes the guest submission (vk_exec_draw.c ssbo_info, vk_mem_shadow_table_read); and vk_mem_shadow_sync brings the CPU's writes into every shadow on the list once for that guest submission, before the part is submitted. Once is enough, because the copy-ins read the guest submission's write-watch snapshots, which a second sync would find unchanged. Measured by #551's author on Linux (RTX 4090, Kokiri Forest): 113 and 76 frames over 25 ms in 75 s against 217 and 429 with the port, 43 against 41 fps, the picture complete in both.
What this line had built on the port stays, on the new sync: the test that passes over a pool with nothing written (shadow_pool_clean), the upload of the same pages into a table pool's VRAM mirror, the write-back of stores through the table (NX2NAVI_SHADOW_TABLE_STORES, table_wb_cb, now asked once per guest submission that binds the table) and the counts of NX2NAVI_SHADOW_CHECK. The probes that record their own commands (the lost-device probe, --probe-vkmem's table parts) call vk_sync_submit_own, written anew. vk_mem_shadow_storage stays: one line that returns the mode. Finalized pools in the table were already kept for vk_mem_shutdown here.
--probe-vkmem has a check of its own for the sync (test_table_sync): the shadow of a pool that is never bound keeps its old word through a CPU write and a guest submission that does not bind the table, and holds the new one after a guest submission that does. It passes with NX2NAVI_SHADOW=1 on Windows (RTX 5090), as do the store check with NX2NAVI_SHADOW_TABLE_STORES=1 and the probe without shadow storage; --probe-devlost ends as before. Not run: the game, with or without shadow storage, and anything on Linux.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The probe's programs are written in the shape the translator gives a task or mesh program and need no game files.
With a folder of game translations it converts those instead and builds their compute pipelines.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
tools/validate_shader_cache.py reads every module and its reflection from the pack and the loose files, says how many the game would refuse and translate again, runs spirv-val on the others and groups what it refuses by message. It writes nothing to the cache. tests/validate_shader_cache_test.py checks it on a made-up cache.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A save that found no memory for its copy, could not write its file or met a build that had just begun was not tried again until the next new pipeline was built, so a run that built none and then ended without its orderly exit lost what it had compiled since the last file. The autosave thread now repeats the try, and the same bound holds for the save owed after the play file was folded in, which before was tried at every interval for as long as it failed. tests/save_retry_check.py checks the rule.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The library creates its pipelines itself and names no pipeline cache. It is now handed pipeline creates of the runtime's in the place of the device's two, and a create without a cache is asked of the pipeline cache first and compiled into the play cache otherwise. ffx_pipe_cache = 0 turns it off. --probe-ffx-cache makes one upscaling context without a window or the game and says where its pipelines came from, and tests/ffx_cache_check.py runs it.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The row showed AMD FSR 3.1 alone, and the frame generation of AMD's FSR SDK 2.4 could only be set in nx2navi.ini.
It is now listed after AMD FSR 3.1 as "AMD FSR 4 library" with the version the library runs on the card (3.1.6 on
an RX 7900 XT, the machine-learned 4.x on a Radeon RX 9000), where its libraries are there and FSR 4 runs. Choosing
it sets fsr4_fg and, since it generates only beside FSR 4 upscaling, FSR 4 as the upscaler; choosing AMD FSR 3.1
clears fsr4_fg. The performance overlay names the one whose swapchain is in place. In a test run the row went from
AMD FSR 3.1 to the new choice, back and to it again, and the swapchain followed each time.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
pipeline-cache.bin was copied out of the driver and written whole at every save after any pipeline was created, also one the cache had held: tonight's logs show three saves of 358.1 MB in a run that added 0.3 MB, and 302 to 306 MB written in each of seven sessions that added about 0.5 MB each. The library warm in play built its 37,572 stage libraries into the same cache, which grew it by 1.6 GB: a save of 2026.7 MB in play, a file over pipeline_cache_max_mb, and the next start dropped it whole and compiled the pipelines it had held.
cache_save now asks a cache for the size of its data first and neither copies nor writes one whose size is what its file holds. What a run compiles goes into a second cache with its own file, pipeline-cache-play.bin (pipeline_cache_play, default 1; needs pipelineCreationCacheControl): pipe_create_in asks the first cache with VK_PIPELINE_CREATE_FAIL_ON_PIPELINE_COMPILE_REQUIRED_BIT and builds into the play cache only when that says a compile is needed, and in play only the play file is saved. At a start the play file is read back and merged into the first cache in memory; once it reached pipeline_cache_play_mb (64) it is folded in for good: pipeline-cache.bin is written once, before play, and the play file removed. The preparation modes fold it at any size and build into the one file as before. The library warm's threads create with no cache of ours, so their libraries reach the driver's own cache alone.
Checked with --probe-prewarm on a copy of a dev folder's caches (3,212 recorded pipelines, 333 compute shaders), no game run: with a filled pipeline-cache.bin every pipeline came from it and neither file was written; with none and a cold driver cache the compiles went into pipeline-cache-play.bin (75.9 MB written, pipeline-cache.bin not created); the next start merged it and wrote pipeline-cache.bin once (191.1 MB) and removed it; kept below the fold size, a play file of 68.8 MB gave 1,445 pipelines at 0.3 ms from the first cache where 470 hit without the merge, and was not written again. Not checked in play: the saves during a session, the library warm without a cache, and drivers other than NVIDIA's.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
runtime/vk_fg4.cpp makes the frame generation swapchain and context with the libraries FSR 4 comes with
(amd_fidelityfx_loader_vk.dll and amd_fidelityfx_framegeneration_vk.dll beside the executable). vk_fg.cpp takes
that path only with fsr4_fg = 1 while FSR 4 is the upscaler; the default stays the FSR 3.1 library. The loader
picks the version for the card: the machine-learned FSR Frame Generation 4 on Radeon RX 9000 cards with Windows 11,
which is untested, and 3.1.6 elsewhere. On an RX 7900 XT (driver 26.10.1) it lists frame generation 3.1.6 and the
swapchains 4.0.0, which the driver brings and the loader chooses, and 3.1.7. The swapchain in place is wanted only
while its library is the one to use, so a change of the setting or of the upscaler, or a failure of this path,
takes it down as switching frame generation off does and the next present makes it with the other library.
The preparation gives this library the camera's position and axes, which FSR Frame Generation 4 requires, and a
scene scale of one metre a unit: with the 0.01 the FSR 3.1 path uses, version 3.1.6 drew grey translucent shapes
into the sky of its frames while the camera turned (160 captures of the screen during a camera sweep; clean with 1).
Both paths now generate a frame only when the picture without the HUD is there for it: generated from the
presented picture alone, the HUD would be warped with the scene behind it. In four configurations (21:9 with either
library, a 16:9 picture in a 21:9 window, a 1080 picture without HDR) every generated frame had it, and the log
counts the frames without. On screen, of the 6,404 pixels of the HUD's item button that stayed fixed through a
camera sweep with the FSR 3.1 library, 6,162 stayed fixed with this one.
Standing in Hyrule Field at 3440x1440 with FSR 4 Quality the game draws 43.0 frames a second with this path and
42.2 with the FSR 3.1 library, each shown twice over. One run changed the present mode, HDR, fullscreen, frame
generation, FSR 4, this setting and the upscaler in turn: 216 screenshots without a bad frame, and no failure.
The SDK's frame generation headers join runtime/third_party/ffx_sdk, unmodified. tools/make_kit.py and
tools/make_launcher.py take the third library from the --ffx4 folder when it is there, and tools/make_game.py
copies it beside the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game held 23.9 to 24.4 GB of commit in three sessions on an RTX 5090 at 3840x2160, flat over the session, on a
machine whose commit stood at 66 of 73 GB with it. A machine that cannot give it that much pages, drops textures or
loses the device, and its log said nothing about memory until then.
mem_start_note reads the system's commit when a game starts and writes one warning line when what is free, plus what
the process already holds, is below mem_need_mb (24576 by default, 0 for no warning). The menu has no place for a
start-up notice (its only toasts are the co-op page's), so the line is in the log alone.
tests/mem_need_check.py checks the rule and, through --probe-memneed, the answer and the warning line with the
machine's own commit.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Only the large compute shaders' background builder looked at the system's commit before it started a build, and it
saw nothing of what the builds beside it were about to take. The boot's recorded pipelines (up to 64 builders), the
pool's background builds during play, the boot's compute pipelines and stage libraries and the library warm asked
nobody.
Each of them now asks the gate before a build. A build that starts reserves an estimate of the driver compiler's
working memory until it ends (build_reserve_mb, 64 MB; 4096 MB for a large compute shader), and the gate admits a
build only while the commit headroom holds the part kept free (build_free_mb, 4096 MB), the reservations and its own.
A refused boot builder ends and leaves its pipelines to the pool; the pool leaves a background build queued and asks
again every two seconds; the stage library prebuild and the library warm wait up to 30 seconds and then end, and the
warm goes on at the next start. A pipeline a draw or a dispatch waits for is never refused. The preparation of the
pipeline list runs without the gate: no game runs beside it.
tests/build_gate_check.py checks the gate's arithmetic and, through --probe-buildgate, its answers with the machine's
own commit. What the builders do when refused is not exercised by a test.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The prepared list named its shader variants and nothing about where they came from, so an update that keeps the prepared shaders (shader_carry) kept the old list whatever seed the new kit writes: variants only the new seed names, from a newer pipeline list or a change to which variants are prepared, were translated when play first drew them. The existing identities do not cover this: nx2navi_xlate.id and identities.txt name translators, which decide cache keys and what is carried over, not which variants are listed.
The list is now version 2 (runtime/prp_file.h): after the head come the sha256 of seed-programs.bin, the sha256 of seed-answers.bin and the translator identity, written by gfx_shader_prepare_seed; the three readers go through gfx_shader_prepared_read and still read a version 1 list. At an update step_shaders writes the seed first (prepare_shaders.py --no-run, about 4 s) and keeps the list only when its digests are that seed's (make_game.py seed_changed); another seed, or a list that does not say, is prepared again. Another translator alone still carries over: input ids do not depend on the translator, and preparing everything again for it is what carrying was made to avoid.
Checked with tests/prp_file_check.py (the C layout against make_game's reader), three launcher tests, and the exe's --prepare-shaders on a seed without records in a folder of its own: the digests it wrote are those of the seed files, one byte more in the seed reads as changed, and after preparing again it does not. A version 1 list of 42,142 variants and the same list as version 2 are both read whole by --probe-prewarm.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A lost device used to end the process from whichever submit or wait noticed it first, while the present only logged it
and went on and the other threads kept calling the driver. The completion thread could take the submissions' timeline
as reached and run the callbacks of submissions that never finished.
vk_device_lost_check now takes the result of every submit, present, acquire and wait. The first thread to see the loss
sets a flag, writes the report and ends the process as a fatal error does (the log written, a save commit under way
finished), with an exit code of its own; later threads stop in that call, and a watchdog ends the process after ten
seconds should the first thread hang. The replay, its submit, the uploads, the present and the lazy fetch read the flag
and return without touching the device. The completion thread asks the device with a call of its own before a new
value counts and runs no callback once the flag is set.
The executable's --probe-devlost and tests/device_lost_check.py check this without a lost device, and
device_lost_at in nx2navi.ini ends a real run the same way.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
cache_load measured pipeline-cache.bin with ftell into a long, which is 32 bits on Windows: a file past 2 GB measured as -1, so the run started with an empty cache and the log said nothing, not even that the file was over pipeline_cache_max_mb. The read now lives in runtime/vk_cache_file.h: the length comes from the 64-bit tell, the read runs in 64 MB pieces, and a refusal returns its reason and the file's size, which cache_load logs. The Windows atomic write no longer cuts a block of 4 GB or more to a 32-bit count.
tests/pipeline_cache_file_check.py reads a sparse file just over 2 GB through the header. With --probe-prewarm and such a file carrying this GPU's header, the log reads "holds 2048 MB, over NX2NAVI_PIPELINE_CACHE_MAX_MB 512" under the default limit and "2048.0 MB read" with the limit off; the exe before this change logged nothing for the same file.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
runtime/vk_ffx4.cpp loads amd_fidelityfx_loader_vk.dll from beside the executable and asks it which upscaler
versions the device can run. Where a 4.x version is listed (Radeon RX 6000, RX 7000 and RX 9000 cards with AMD's
driver 26.10.1 or newer) the menu's Upscaling row gains AMD FSR 4 Native AA, Quality, Balanced, Performance and
Ultra Performance, and fsr4 = 1 runs it in FSR 3.1's place with the same inputs. Its contexts are made with that
version asked for by its id and the provider is asked afterwards which version it runs, so no other upscaler can
be shown under the name. When a context or a dispatch fails, FSR 3.1 makes the frame, and after three failures
FSR 4 is off for the run. Each upscaler starts its history anew on the frame after a change from one to the other.
The setting is off by default and the Linux build compiles stubs.
On an RX 7900 XT (driver 26.10.1, 3440x1440, HDR) the library runs FSR 4.1.2: a context takes 54 ms to make and
217 MiB of video memory. Standing in Hyrule Field: Quality 47.8 fps where FSR 3.1 gives 51.5, Native AA 41.4.
Screenshots of 601 consecutive frames standing, 801 during a camera sweep, 701 each in Kakariko and the
graveyard, and 1,301 across changes between FSR 3.1 and FSR 4, their modes and off show no flicker that FSR 3.1
does not have, and it runs together with FSR 3.1 frame generation.
The SDK's API headers are in runtime/third_party/ffx_sdk, unmodified, with the licence. tools/make_kit.py and
tools/make_launcher.py take AMD's two signed libraries with --ffx4, and tools/make_game.py copies them beside the
game when the kit has both.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Button Color recoloured the list panel, the description box and the title band, and left the orange choices in the rows as they were, so the buttons themselves seemed not to change. It now takes the rows' label cells, their value cells and the orange choices, which come out a lighter shade of the picked colour; the new Panel Color takes the panels, the dividers and the title band. Text on a light button or panel turns dark, and so does the text in choices that come out bright. The colour is kept as custom_panel in launcher.json.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Custom is the last scheme in Customize Launcher. Its Background Color and Button Color rows open a picker in the description box's place: a square of the hue's colours (saturation across, brightness up and down) with a hue bar under it to click or drag on, Hue, Saturation and Brightness rows for the arrows and the gamepad, and a Hex Code row to type a code into. Each picked colour takes the place of one colour of the first scheme, the backdrop's middle tint or the buttons' wood, and the rest of its group follows it, lighter and darker as in the first scheme; light buttons get dark text. The colours are kept as custom_background and custom_buttons in launcher.json.
The background picture used to fill the whole window, so its top was hidden under the title band. It now fills the window from where the band ends, cut to that shape around its middle and scaled evenly. A copy an older launcher kept for the whole window is cut, never squeezed, and made again from the picture file while it is there.
Add to Steam's description and result are now one plain sentence each.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
mouse_mode = direct is the default, but on 1.1.1 it did nothing: only the 1.4.3 patch table had the sites, so the mouse always went through the stick emulation, which gives no turn at slow mouse speeds and tops out at about 107 degrees a second. The 1.1.1 table now has the set mouse_direct (on by default): at main+0x37c45c, where the camera's input update holds the processed stick in s1 and s0, a host call performs the displaced store and adds the raw mouse counts to both, so the mouse meets no dead zone and no curve; at main+0x37c4f0 a second call clears the idle bit for an update the mouse moved in. The counts are divided by the frames the game steps per update and by the stick camera speed, so the same hand movement turns the same angle at every frame rate. The Controls tab gets the mouse mode and mouse sensitivity rows, and mouse_mode = stick or NX2NAVI_MOUSE_DIRECT_PATCH=0 gives the old behaviour.
Checked here: the generator lifts the 1.1.1 game with the two sites (it compares each site's original word), the lifted game compiles and links with the runtime, and tests/mouse_direct_check.py passes its 1.1.1 harness (register contract, displaced store and load, equal turn at every frame rate and stick speed, the reset pause, capture and mode). Not checked here: the game was not run, so aiming with the mouse was not tried, and the differential tests against Unicorn were not run because no Python on this PC has Unicorn. The contributor measured 0.0800 degrees per count on both axes in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit bb8fecfbe43517006eafd7be9c22e8dbe9601de7)
Without the other players drawn in the world, which are unfinished. No relay address is built in, and with co-op off nothing opens a socket. Built on Windows and tested against a relay on this PC only; two games in one room and any real network have not been tried.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The walk key (walk_key, walk_scale) works and the settings example says the Controls tab sets both, but the tab had no row for either: the row's function was left without a caller, and a player asked for a walk key because he could not find one. Walk key and Walk scale are back under the analog stick rows, with the texts that were already there, and the guide names the setting. The second half of the contributor's change, a toggle mode, is not taken: it is a new feature that nobody has pressed a key against on Windows.
Built; the rows were not looked at in the menu, since no game could be started.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 02fab940a1bb79d8867f5e764ee597ea8eb662e8)
A second reading of the commits taken in from pull requests found these, each traced in the code:
- heap_lazy: the camera speed's search read the whole heap, which with the setting on committed every page and undid what it saves; a scan now steps over the pages the lazy heap never committed (mem_untouched_run). tests/frame_step_check.py and tests/save_share_check.py no longer linked (frame_rate.c and fs_host.c call the new memory functions; the second also missed mem_probing before); both pass again. The settings text says that with the setting on a PC out of commit ends the game in play, not at start, and the census comment is back over its own function.
- Pipeline libraries on AMD's older Windows driver: the condition is the driver for RDNA 2 and older (RX 400 to RX 6000), not RX 5000 and RX 6000 only, and the texts named a price the code does not have. With libraries off a new pipeline is built by a worker while its draw is left out, and the start waits for every recorded pipeline instead of 20 s at most. The texts say so, and that the finding is one player's on one card. The menu strings nothing shows are as they were.
- Page file hint: it comes only when Windows sizes every page file, and it names the initial size and the automatic management that must be unticked first.
- Frame generation note: it keeps "needs an RTX 40 or newer" for the players it is right for and points the others to the log; the bridge's line says it is Streamline's general support check.
- Comments and settings texts that still described the old behaviour: the process commit bound, the wait with shadow storage, the scratch's least size, the action prompt under auto.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 19f03aa01b26d6e17fb5fc70ad987aa8c68e8225)
Each player keeps their own game and save. One player makes a room, the others join it with its secret, and story flags and, by the room's rules, items, songs, quest items, small keys (a shared pool), rupees and ammunition reach every save. The layer is a host thread with one UDP socket to a relay the players run themselves (tools/coop_relay.py, Python's standard library only); the messages between the players are sealed with a key from the room's secret (XChaCha20-Poly1305, Monocypher 4.0.2 vendored with its licence and a row in THIRD_PARTY_NOTICES.md), every change is signed by the player who made it, a player accepts a room by its members' keys and the key of its rules, the save is copied to coop-backup before anything is applied, and values are set through the game's own routines between frames. The Co-op tab makes, joins, accepts, removes and leaves, and the menu takes typed text for the name, the relay and the secret. This is the contributor's pull request #518 on this line.
Nothing reaches the network while co-op is off: the socket is opened, and the relay's name looked up, only after co-op is on, a relay is set and a room is made or joined. There is no default relay.
Left out of the pull request: the other players drawn in the world (the "puppets") with the copied engine they need. They were unfinished, added two patch sites to the game's per-frame update that could not be put through the differential tests here, and their file helpers clashed with the ones this line already has. So no position is sent: the POS message's codec stays, nothing sends it.
Changed against the pull request:
- The menu's test hook drives the Co-op tab only when it comes from the environment. From nx2navi.ini it could turn co-op on, join a room and accept its offer.
- The log's label for a room is hashed from the secret instead of being its first three characters.
- A game that has not saved yet has no save to copy, and takes nothing from the room until it has saved once; that used to count as a copy made.
- A PING's token no longer carries the PC's uptime.
- On Windows the maker's key file and its folder get an access list with the player's account alone.
- The tests that link the platform layer get the socket library, and the save test a stand-in for the title screen's hook.
Checked on Windows, where the pull request had never been compiled: the runtime builds and links; --probe-coop passes (sockets on 127.0.0.1, the codec against its byte vectors, a fuzz of every parser, two sessions through a hostile mock relay, a relay restart, the sync engine); tests/coop_relay_test.py passes its 61 tests, with the probe through the real relay on 127.0.0.1 at 0 and 30 % loss; tests/coop_page_check.py passes and its deliberate fault fails 48 checks. Not checked: two games in one room (one game runs at a time here), any real network, the tab in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The two sides both made the wait after a frame's first submission cover the write-backs under shadow storage; the rule is kept in one place, vk_sync_wb_split.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
NX2NAVI_SHADOW_CHECK=1 logs with the shadow line, every 60 frames: the whole copy-ins that overwrote a store a
shader made through the device address table, and the pools they fell on; the write-backs that moved bytes into
a page the CPU had written since its copy-in; the bytes both sides changed since their base copy; what the
copy-ins cost by kind, and which pools and flag sets took them. The stores are found by content: a whole
copy-in leaves a hash of the page, and the next one compares the shadow page with it first.
NX2NAVI_SHADOW_TABLE_STORES=1 keeps such stores: a page found stored into gets a base copy, so copy-ins take
only the CPU's bytes, and the fence of every submission that uses the table writes the stores back to guest
memory. --probe-vkmem checks it with a GPU write that nothing notes. It is off by default. The overwrite it
removes was the suspected cause of the flicker on Linux and is not: standing outdoors (RTX 5090 with
NX2NAVI_SHADOW=1) it happens exactly four times a frame, on ten pages in pools of 20 and 44 KiB, with the copy
that precedes the frame's stores, and no frame came out wrong with it or without it in 1,800 frames each; the
hashes cost 1.8 ms a frame of the replay (67 against 75 fps); and a count the CPU resets before the write-back
has landed would keep counting, where the whole copy-in resets it every time.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With shadow storage (the Linux default) what the GPU wrote reaches guest memory in the fence's completion
callback, later than an import's store on the GPU. The wait after a frame's first submission returned at the
executed timeline, before that, so the game rewrote what those passes had written and the write-back then put
the GPU's older bytes back over the rewrite. The whole 3D scene came out brighter for single frames, each of
them a frame whose main work was held at its CPU event wait and replayed late.
Standing outdoors with NX2NAVI_SHADOW=1 on an RTX 5090: 695, 624, 443, 323 and 2 flashed frames of 1,800 in
five runs with the split, none in eight runs without it. The frame rate did not drop (74.6 fps median with the
fix; runs of the build before it gave 71 to 72). NX2NAVI_WB_SPLIT=2 keeps the split with shadow storage, to
measure the fault. That this is the flicker a player reported on Linux (RX 7800 XT, RADV) is not confirmed on
their machine; NX2NAVI_WB_SPLIT=0 gives 0.7.1 the same wait there.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The HDR tonemap gains a mapper built on a finite cone response in LMS: scene grey 0.18 lands where the game's curve puts it and rises through it with the slope of the game's curve, and the hue bend of the game's clamp is given back to bright colours. It takes the scene before the game's exposure gain and the gain itself, which the splice now finds in the game's shader. The luminance mapper stays selectable and the game's own curve stays the third choice. The mapper fits the Rec. 709 gamut here, as the game's scene target holds no negative component. New settings: the tone mapper's mid grey, tone slope match, tone slope and hue clip emulation. The gamma correction on the present applies with the luminance mapper only.
Not part of this: eye adaptation, the anti-aliasing and reconstruction shaders, bloom and local exposure sliders, the output colour space choice and a 16-bit float scene target. Checked by build and numerically against the source of the port; the picture on an HDR display has not been judged. THIRD_PARTY_NOTICES.md names the source.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The action prompt at the top right of the HUD draws the four face buttons as a diamond in the console's places: A right, B bottom, X top, Y left. Under pad_layout = xbox, playstation or auto the A action is the bottom button, yet the diamond kept A on the right, so the prompt pointed at the wrong button. At start the runtime now edits the prompt's layout in the shared interface archive for such a layout (the buttons, the dots and the lit crosses move, and the bubbles of X and Y flip) and serves the result from the profile folder; with nintendo, the default, nothing is changed. Every field is found and checked before anything is written, so a layout a mod changed is left as it is, and the archive is packed again with the game's own dictionary at the same unpacked size. One SARC reader and dictionary lookup now serve this, the camera pack and the menu's assets. When the layout changes, the menu's Restart counts the diamond.
tests/action_prompt_check.py passes without game files and on the game's own archive (4 copies, 208 fields, 13 ms at start).
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With the page file left to Windows the commit limit stays near the installed memory plus what the file held at the start, and on a 16 GB PC with a 16 GB card it ran low in Hyrule Field at 32 GB, where a fixed page file of 32 GB or more gave 49 GB and no low commit. The first "system commit low" line of a run is now followed, once, by a line that names the cause and the Windows setting, and the build kit's guide gives the same advice for 16 GB PCs. plat_page_file_managed reads the PagingFiles value once; on this PC (page file sized by Windows) it returns 1.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game opens two input streams while it starts and leaves both stopped through ordinary play, and each open took the system's default recording device and held it, paused, until the game ended: Windows shows the microphone as in use for the whole session, and a Bluetooth headset can drop to its call profile. An open now checks that a default input exists and prepares the stream and its bounded buffer; the device is opened at StartInputStream and released at stop or close, after which the game can still read or purge what was buffered. A start that is refused returns an input error and can be tried again.
tests/audio_input_check.py did not compile on this line (it had no stand-in for the microphone setting); with the change it builds and passes: idle streams hold no device, a refused start can be retried, a stop releases the device and keeps the unread frames, two streams are independent. Not checked with a real microphone in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
That driver faults inside vkCreateGraphicsPipelines when it links the stage libraries of a burst of new pipelines. The game asks for one when an enemy dies and its effects are drawn for the first time, so the game ended with code 71 at every kill on an RX 6700 XT and an RX 5700 XT (issue #418), and the player who reported it found that gpl = 0 stops it. Unset, the setting is now off with that driver (vk_caps.amd_sc) and on everywhere else; gpl = 1 turns it on there, gpl = 0 off anywhere, and the caps line of the log says why it is off.
The price on those cards is that a new pipeline is built whole on the draw's path. Not run here: there is no AMD card. On an RTX 5090 the device probe reads "gpl yes" as before and "off by NX2NAVI_GPL=0" with the setting.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
An indirect mesh draw reads its workgroup count through a ring entry that a buffer copy fills, and a copy cannot be
recorded inside a pass: every such draw ended its pass, 45 times a frame in a village. The first draw of a run now
fills the entries of the mesh draws that follow it with only state, draws, counter reports and render conditions
between them, and those draws stay in the pass (mesh_ahead, default 1; 0 is the old way, ab switches in A/B blocks).
An entry is taken only by the draw it was filled for, at the same record address, while no other op was replayed
since. Counter reports count as staying in the pass because the replay closes their query inside it and writes the
value from the completion thread; the game reports one after most of these draws, and without that only 38% of the
draws were served.
Measured in the village: 42 of the 45 draws a frame are served by an entry filled ahead; gaps with these copies
41 to 3 a frame (0.22 to 0.04 ms of GPU time); passes and dispatches 248 to 208 a frame (302 to 254 in Hyrule
Field). With the piece release of the commit before, one run each: village 142.6 fps and GPU busy 3.87 ms (138.0
and 135.4 fps, 4.15 ms without this change), Hyrule Field 136.8 fps and 4.34 ms (131.5 and 131.3, 4.70 ms). In A/B
blocks of one run with the narrower rule (counter reports still ending a run) the GPU's busy time went from 4.81 to
4.64 ms.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The launcher asked for 31 GB where the build's own check now asks for about 34, so a disk between the two passed the first check and was refused seconds later. Both say 34 GB now. The build no longer asks for the whole shader preparation's space when the game folder already holds translations. The texts said 10 to 25 minutes for an install that took players 27 to 41, and 5 GB for a build cache that measures 1.6. A build error's message goes into the launcher's log as one line.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>