That driver faults inside vkCreateGraphicsPipelines when it links the stage libraries of a burst of new pipelines. The game asks for one when an enemy dies and its effects are drawn for the first time, so the game ended with code 71 at every kill on an RX 6700 XT and an RX 5700 XT (issue #418), and the player who reported it found that gpl = 0 stops it. Unset, the setting is now off with that driver (vk_caps.amd_sc) and on everywhere else; gpl = 1 turns it on there, gpl = 0 off anywhere, and the caps line of the log says why it is off.
The price on those cards is that a new pipeline is built whole on the draw's path. Not run here: there is no AMD card. On an RTX 5090 the device probe reads "gpl yes" as before and "off by NX2NAVI_GPL=0" with the setting.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The default was off only on AMD's driver branch for RDNA 1 and 2, on the grounds that builds with the default on had been measured on an RX 7900 XT. Those measurements were standing in Hyrule Field and walking through a village; the report this is about is of a game that ended in fights, on an AMD card the player did not name, and fights are where the lazy path is busiest. Nobody has played one on an AMD card under our eyes on either branch, so the exception is now AMD's own driver as a whole (wb_lazy_choice.h, by VkDriverId), until a card of each branch has played fights with wb_lazy = 1 and a log to show. The cost is the open-area frame rate of 0.7.0 on every AMD card under Windows; the RX 7900 XT figures in the draft notes come from builds that had it on by default, which the notes now say. wb_lazy = 1 still turns it on.
--probe-vkdevice prints the line a fatal error or a crash adds to the log, so its wording can be read without a failing run. On an RTX 5090: "fatal: gpu NVIDIA GeForce RTX 5090, driver NVIDIA "621.01" version 621.1.0.0; memory mode mirror, lazy write-back on (the default on Windows (wb_lazy = 0 turns it off)); texture detail not chosen yet (no texture made)", and with the reporting player's nx2navi.ini beside the exe "lazy write-back off (wb_lazy = 0 is set)", after a start whose log names async_compute, vram_safe_mode and exception_handler as no settings of this version.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The new row, Add to Steam (Windows), puts a non-Steam shortcut named "The Legend of Zelda Ocarina of Time" into the shortcuts.vdf of every Steam account that signed in on the PC (launcher/steam.py): the binary key-value file is read and written back as it was, with ours added or updated in place, and the file from before the first change kept beside it. Steam reads that file only at its start and writes it back when it closes, so a running Steam is asked to close (-shutdown) and started again after.
The pictures come from the player's game when the row is selected (launcher/gameart.py), as the launcher's fonts and sounds do: Navi from the HUD's icon and its glow, the logo with the Master Sword and the Hylian Shield from the title screen's texture archive (decoded with runtime/tex_astc.c, built into a library with the toolchain's clang), and a frame 12 seconds into the first title movie, the field under the full moon, decoded from its AV1 with the toolchain's dav1d.exe, as the background, the cover and the wide tile. They go into config/grid named by the shortcut's id, CRC-32 of Exe and AppName with the top bit set, which matches the id Steam gave an existing shortcut on the test PC.
Steam starts the launcher's pythonw.exe on data/steam_play.pyw, which runs the launcher of app/current.txt with the new --play: the game starts from its folder with its console hidden, as Play starts it, and the process waits for it and for the copies its own Restart starts, so Steam counts the game as running while it is. ocarina.exe is a console program, so starting it directly would open a console window beside the game, and NX2navi.exe ends six seconds after it started the launcher. Started that way on an RX 7900 XT PC, the game ran, the Python process stayed until the game was closed and ended with code 0. Tested against copies of that PC's Steam files; the real Steam library is not changed until the player selects the row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Both are about the time between two frames. Ocarina waits for the previous frame's fence before it lets the next frame's GPU work start: its main thread signals an event from the CPU, and the main queue's commands begin with a wait for it.
The completion thread ran a submission's callbacks before it let the submission's waiters go, and the occlusion counts were among them: one vkGetQueryPoolResults and one vkResetQueryPool per reported query, about a hundred queries a frame in Hyrule Field. On an RX 7900 XT (26.10.1) each call goes into the kernel, 3.9 ms of every frame, so the fence was reached 4 to 6 ms after the GPU had finished with every game thread waiting. Slots come from the ring in order, so one call now reads up to 256 slots from the one asked for, the available results are kept for the segments that follow, and the slots taken are reset in runs (vk_exec_xfer.c oq_take, NX2NAVI_OQ_BATCH). Standing in Hyrule Field at 3440x1440 with FSR: 52.7 fps against 44.6, the longest frame of the measured minute 46 ms against 55; the completion thread spends 0.3 ms a frame in the callback.
When the CPU's signal came a millisecond or two after the main queue's submit call, the submission took its copies, stopped at the wait and was held; the render thread polled the event, presented, and the present replayed the frame under a value the game's fence does not stand for. The next frame then skipped its wait for the GPU and was replayed inside its submit call, and frames of 23 and 15 ms took turns. A submission that begins with a wait for an event the CPU has signalled before now waits for the signal in the submit call, before its copies are taken, 10 ms at most (vk_exec.c vk_exec_gate_wait, NX2NAVI_GATE_WAIT_MS): 54.5 fps and a longest frame of 33 ms in the same place, 58.6 fps with the recorder thread on. With a camera sweep the pictures went out 21.0 ms apart on average with a 99th percentile of 55 ms, against 25.4 and 64. A village went from 48.6 to 53.7 fps and a graveyard from 56.5 to 64.2. 900 consecutive frames of a still scene show no dark or changed frame, with the recorder thread and without.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The reports of black and white blocks on Navi, on Link next to her and on bright surfaces seen from inside a house come from RX 5000 and 6000 cards, whose Windows driver compiles with "AMD proprietary shader compiler" (vk_caps.amd_sc); an RX 7900 XT (LLPC) draws the same scenes clean. The game's shaders test for NaN with OpIsNan in 48,717 of an install's 54,959 translated modules, 26 tests each on average, and the translator's guard that keeps NaN out of every float colour output, so that one bad texel does not spread through blur and bloom into blocks, is such a test too. SignedZeroInfNanPreserve asks the driver to keep those tests; whether that compiler does is not known.
With that driver, vk_pipeline.c spirv_nan_bits now turns every 32-bit isnan, scalar or vector, into (bits & 0x7fffffff) > 0x7f800000 on the number's bits, and a float select with a constant whose bits are a NaN into a select of the bits (issue #156), when the module is created. NX2NAVI_VK_NAN_BITS=1 does it on every driver, 0 on none. Run over every module of an install's shader cache, the rewrite changed 1,281,675 tests and 57 selects with every output well formed (each id defined once, below the bound, the uint types declared once); --selftest checks it on a small module, and Link's house with it forced on (RX 7900 XT) draws as without it. Not yet tried on an RX 5000 or 6000 card.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
What came in since 0.7.0: the lazy write-back on by default with the flicker's cause fixed, the pipeline read-ahead
and linking changes, the texture detail setting, the mirror share for 6 GiB cards, five pull requests and the log
queue's order. The notes say which numbers are single measurements and that the small-card changes were measured with
the budget capped on a larger card.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The Linux section says plainly that none of it was run here. The AppImage is described as built and attached by an
automated job after the release is published.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The two commits main gained since the last merge. docs/releases/v0.6.2.md stays removed; the two notes they added to
it are in docs/releases/v0.7.0.md. Checked on a dev build of the merged tree: the settings, self-test, graphics ABI,
input and kernel probes pass, and a scripted run with six DLSS mode changes presents no dark or black frame, makes the
area's textures in one frame at the load and ends without a fatal error.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With it on, single frames come out with the whole scene lit differently (brighter, shadows off). The flight recorder's
thumbnails of 1,800 presents standing in Hyrule Field show none with it off in every run, and with it on 43 to 181
while four other threads keep the CPU busy (10 to 97 in earlier runs, 0 on an idle machine); the cause is not found.
Two candidate fixes (arming only against a sync whose copies were handed over, and snapshots waiting for GPU writes in
flight) did not change the count, and fetching at every release made it far worse.
So wb_lazy is 0 unless set, on every platform (mem_init loses its special case), and the Screen tab has the row
Experimental FPS boost for it on Windows, with its text in the four menu languages; like every setting read at the
start it notes "after restart". The 0.7.0 notes describe it as experimental and off, say about 1.6 GiB for the video
memory a full shader cache no longer holds (2,484 to 846 MiB at the title screen in the measured run), and list the
two fixes before this one.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The overlay's rate, lows and graph were fed from the game's present calls. With the replay on the submitting thread, work held for an event is replayed with the next frame, so the calls come in uneven steps although each frame costs about the same: 36 and 9 ms apart in turn in a village, a sawtooth in the graph and a 1% low of 14 fps, while the pictures went out 19.7 ms apart on average and changed by 3.9 ms from one to the next. The present thread now reports each picture (perfmon_shown) and the overlay takes its intervals from that; the game's calls are used only where no present thread reports.
A picture that arrives early now waits until seven eighths of the recent interval have passed since the one before (vk_backend.c pace_smooth, NX2NAVI_PACE_SMOOTH, on by default; not with frame generation). In that village the change from one picture to the next went from 3.9 to 3.0 ms at 51 fps both ways, in a graveyard from 3.1 to 2.6 ms at 54.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With NX2NAVI_REPLAY_ASYNC the uniform snapshot was taken when the replay thread started recording a submission, up to a frame after the game submitted it. The game rewrites that memory without waiting for the GPU: in a graveyard the settings block of the shadow pass held another block's values in the frame its per-frame allocator moved on to the next stretch of memory, about every 364 frames. The submitting thread now takes the copy before it queues the submission (vk_usnap_take), and the replay thread takes it over and leaves out what GPU writes in flight touch (vk_usnap_begin adopt). A frame dump of such a frame shows the block as the game submitted it.
That frame still comes out dark with the option on: vertex, storage and index memory reaches the VRAM mirrors when the replay uses it, as late as the uniform blocks did, and the snapshot covers uniform bindings only. With the option off, 3,000 presents in a row were free of dark and odd frames in that graveyard and in a village; with it on, one frame in about 364 was dark. It gave 65.6 against 56.1 and 64.1 against 54.3 frames per second in those two places. The option stays off by default, and its menu text, the example settings file and the release notes now say that it can show a dark or flickering frame.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The notes take over the draft kept for the release after 0.6.1 and add what the test line gained since: the open-area
and town frame rate work, the memory fixes, DLSS Multi Frame Generation, the settings that apply while the game runs,
and the fixes from the testers' reports and pull requests.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A draw whose shader or pipeline is still building is left out of its frame, and the frame was shown without it: a black or unlit picture with the interface intact when it was a lighting pass, a light going out, or ground missing for a frame. In a player's session a full-screen draw was skipped after its 50 ms and the frame came out black as a boulder hit.
The frame's present is now left out when draws were skipped (vk_backend.c frame_hold, NX2NAVI_FRAME_HOLD_MS, 120 by default, 0 off). The game runs on, so nothing waits. The hold comes from an allowance that fills again at an eighth of the clock's rate, so a long build or a run of them shows its frames as before and does not freeze the picture; a full-screen draw that would be skipped with the allowance spent waits on instead, 500 ms at most. Not with DLSS Frame Generation.
On a first walk through a village with no pipeline recorded, 21 of the 23 frames with skipped draws were held back; in the Lost Woods, 7 of 8.
The performance overlay: the VRAM line is the card's dedicated memory in use, which counts every program on it: a player read 14.5 GB as the game's while the game held 7.3 GB. The line's third cell now gives what this process holds on the device-local heaps (the driver's budget figure), in place of the GPU clock, which stays where the driver gives no budget.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A new launcher.json starts with sounds at low instead of off, and a value the file cannot hold falls back to low too (launcher/ui/sound.py DEFAULT_LEVEL). The player can still pick Off, Medium or High in Customize Launcher. The sounds are still only the game's select and back sounds, read from the player's own game.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The preparation builds every stage library once so the driver's disk cache holds it and a library a draw needs later takes under a millisecond. Turning dynamic vertex input off for AMD's RDNA 3 and newer driver changed the dynamic states every library lists, which gave each one another entry in the driver's cache, and nothing built them again: an update carried the prepared shaders over without the driver step. On an RX 7900 XT (26.10.1) all 42,142 prepared libraries were cold, 93 ms a vertex and 242 ms a fragment library on average. With no pipeline recorded, a walk through a village skipped 11,180 draws while their pipelines built and made 94 draws wait 5.5 s in all, four of them 1.0 to 2.0 s; a player's session log shows up to 114,834 draws skipped in 600 frames and 181 waits of 251 ms on average. Skipped ground and walls appear and disappear, and a skipped lighting pass is a black frame with the interface intact.
- The game checks the driver's cache at every start (vk_pipeline.c lw_start): a sample of the prepared fragment libraries is built, and when their median time says the cache is cold the whole prepared list is built into it again on idle-priority threads while the game runs. shader-warm.txt records a warm in progress, so the next start goes on with one a run ended, and stops the tries on a driver that does not keep the libraries. This also covers a driver update and a cache the driver emptied.
- An update that carries the prepared shaders over runs the game's --warm-shaders (tools/make_game.py warm_driver_cache): 11 s with the libraries there, about 8 minutes with all of them cold on that card.
- A draw whose pipeline is missing waits for its fast link from a budget of 6 ms a presented frame, 3 ms at most each (NX2NAVI_PIPE_LINK_MS), before it is skipped: with warm libraries the link is done within that.
- Full-screen draws wait from their 50 ms budget again instead of being skipped (NX2NAVI_PIPE_SKIP = any is the default; fullscreen stays selectable). With warm libraries the wait is a millisecond.
The same walk afterwards: libraries 0.3 and 0.7 ms on average, 1,605 draws skipped, 1,473 of them in the scene's first 600 frames and 8 to 80 in each 600 after, and 19 waits of 60 ms in all. First visits to four other saves (a mountain pass, the Lost Woods, Kokiri Forest, a river) waited 12 to 84 ms in all except the Lost Woods, where mesh shader pipelines, which have no stage libraries, and vertex libraries that need added outputs still compiled once: 23 waits, 2.1 s in all, the longest 776 ms.
The texture cache counted its waits in presents chosen at 60 a second: at 165 presents a second the 1800 that stood for thirty seconds were 11 s, so a released render target went sooner than meant and a texture out of view for 11 s was retired and showed its stand-in for some frames when it came back. The counts are now taken times the present rate over 60 (presents_for), and a texture is retired after two minutes without a sample instead of thirty seconds.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The cursor's sound played at every move of the pointer and cut the other two short, as one sound plays at a time: it is gone, and moving the cursor is silent. A choice, a changed switch, Play and the end of a build play the game's decide sound; going back and a failure play its cancel sound. The chimes the launcher made from sine tones are removed too, so every sound it plays is decoded from the player's own game into data/cache/sounds and it is silent until the game has been read. No sound file is in the repository, the release or the setup.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The launcher's sound effects were chimes made from sine tones. They are now the game's interface sounds, the ones its menus make for the cursor, a choice and going back: SE_Sys_Cursor00, SE_Sys_Do00 and SE_Sys_Cancel00, the files the in-game menu plays. The launcher decodes them from the player's built game or dump into data/cache/sounds (gamefiles.extract_sounds, a BWAV reader for PCM16 and DSP-ADPCM), beside the font it already reads that way, so no sound ships. The chimes stand in until the game has been read. The cursor's sound is a little under the others, as in the game's menu, and is left out for a quarter of a second after a choice, since one sound plays at a time and the pointer landing on a row of the next screen would cut the choice's sound short. Sounds stay off until the player picks a loudness.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The launcher's home screen has a Customize Launcher row. Color Scheme steps through six schemes (Kokiri Forest, the colours so far, Death Mountain, Zora's Domain, Gerudo Valley, Temple of Time and Shadow Temple): each is the first scheme with its woods, accents, backdrop and glow turned to other hues, so all keep the same light and dark steps and the same text. Background takes a picture file, cuts it to the window's shape and keeps a fitted copy in data/background.npy; Background Dimming darkens it and the panels turn a little see-through over it. Animations (on by default) make the cursor glide between rows, a new screen slide in, sparks drift over the backdrop and Navi bob in the title band; they move by the time that passed and stand still while the window is hidden. Sounds are short chimes made from sine tones, off until the player picks a loudness.
Redrawing in another scheme takes about a third of a second: the blurred masks and the noise, which no colour changes, are kept, and compositing onto a solid picture is a plain mix.
The selftest's screen capture passed window handles as plain ints, which failed for a handle above 2^31 and left some screens without their picture; its calls are typed now.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The launcher's home has a Saves screen: Export Save writes NX2navi-save-<date>_<time>.zip into Downloads (or a chosen folder) with a manifest, the save the game would load next and, for a bug report, the game's latest log and nx2navi.ini, never a key file; Import a Save checks a zip's manifest, game, paths and CRCs, backs the current save up into the saves folder and replaces it while the game is not running. The game's Game tab has the same exports and an import that waits in profile/save-import and becomes the save at the next start, since the running game would write its progress back over a save replaced under it.
The zip code (runtime/save_zip.c) and the import at start are checked without game files by tests/save_zip_check.py and tests/save_share_check.py; the launcher side by its test suite.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With frame generation set to NVIDIA DLSS at the start, the device is made through Streamline's proxies. Switching the menu to AMD FSR 3.1 then made AMD's frame generation swapchain on that device at once, and NVIDIA's driver crashed with an access violation. vk_fg_wanted now stays false while Streamline's proxies are in use, so the switch takes effect at the next start, as the menu's Frame generation row already says.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each render and output size gets its own FSR 3.1 context, and there were six, never freed. Stepping through the render scales in the menu, plus the game's second scenes, used them up; the seventh size found no context, and FSR 3.1 went off for the rest of the run, leaving the game's own upscaler stand-in to show the picture. When all six are taken, the least recently used one not used in the last few calls is now destroyed once the GPU is idle, as DLSS's sizes already are.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Since the pacer divides the limit by frame generation's factor, the default limit of 60 held the game to 30, 20 or 15 rendered frames a second at 2x, 3x or 4x on any monitor, 15 at DLSS 4x on a 165 Hz one. While AMD's or NVIDIA's frame generation swapchain is in use and neither fps_limit nor the older fps60 = 0 is set, the limit is now the monitor's rate, as with fps_limit = display: 4x on 165 Hz draws about 41 and shows 165. A limit the player set is kept, and the menu's Frame rate limit row shows the display choice while this applies.
The mouse camera divided its input by the limit's frame ratio, which counts generated frames, so frame generation turned it faster by its factor; it now uses the rate the game draws at (frame_step_game_hz).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Checked with the 0.6.0 launcher's own update path against a local copy of the 0.6.1 release: 552 of the game's 562 objects
were taken over, 10 compiled, the prepared shaders kept with the translator that made them named, done 0.2 minutes after
the download.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The commit census of the perf trace walked the address space on the presenting thread outside mem_census, which
brought back the hitch mem_census was added to remove; it now runs only with mem_census = 1. DLSS's output pass at
the mode's share fell back to no pass at all when the scene was not at that share (the first presents, a dynamic
resolution step): after such a frame the first pass wider than the scene is taken again for 120 frames. The launcher's
nx2navi.ini editor no longer rewrites a file it cannot read, keeps the byte order mark and bytes that are not UTF-8,
reads an empty line as the game does, and leaves no temporary file behind. The build kit carries the two modules
build_game.py imports on Linux, the Linux steps list the right packages and Python, and stale comments and notes are
corrected (Discord on by default, two prebuild threads, Enhanced HDR gone).
DLSS Frame Generation needs nx2navi_dlssg.dll, NVIDIA Streamline's runtime and nvngx_dlssg.dll beside the game, which
no release carried, so the menu offered it and the game turned it off. tools/make_launcher.py --dlssg and --streamline
put them with their licences and a notice in the release's bin/dlssg/, and tools/make_game.py place_dlssg copies the
whole set beside the game. THIRD_PARTY_NOTICES.md has the row; the notes and README say RTX 40 and 50.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
runtime/nx2navi.ico (the game window's title bar, taskbar button and Alt+Tab icon) is now the launcher's Navi, written
from launcher/ui/art.py navi_ico at the same ten sizes, in place of the Triforce. ocarina.exe is a console program
and the launcher has none, so Windows opened a console window titled with the exe's path beside the game;
winsys.start_game now passes CREATE_NO_WINDOW.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The float atomic add's compare-and-swap loop (patch 0033) carried its expected value round the loop in a local, but the
pass runs on SSA form and the optimizer's copy propagation takes every value as assigned once, so the loop compared
against a stale value and the froxel fog added up wrong: Kokiri Forest was washed out white. Each attempt now reads the
word with an atomic OR of 0, which also cannot return a stale cached copy.
Writes through the device address table go to the guest copy for stores only (patch 0034). An atomic on the guest copy
started from its stale value, so a counter the GPU reset with a buffer fill kept counting there, and the page's next
sync copied the wrong count into the mirror: culled foliage drew garbage for a frame.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>