The two sides both made the wait after a frame's first submission cover the write-backs under shadow storage; the rule is kept in one place, vk_sync_wb_split.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
NX2NAVI_SHADOW_CHECK=1 logs with the shadow line, every 60 frames: the whole copy-ins that overwrote a store a
shader made through the device address table, and the pools they fell on; the write-backs that moved bytes into
a page the CPU had written since its copy-in; the bytes both sides changed since their base copy; what the
copy-ins cost by kind, and which pools and flag sets took them. The stores are found by content: a whole
copy-in leaves a hash of the page, and the next one compares the shadow page with it first.
NX2NAVI_SHADOW_TABLE_STORES=1 keeps such stores: a page found stored into gets a base copy, so copy-ins take
only the CPU's bytes, and the fence of every submission that uses the table writes the stores back to guest
memory. --probe-vkmem checks it with a GPU write that nothing notes. It is off by default. The overwrite it
removes was the suspected cause of the flicker on Linux and is not: standing outdoors (RTX 5090 with
NX2NAVI_SHADOW=1) it happens exactly four times a frame, on ten pages in pools of 20 and 44 KiB, with the copy
that precedes the frame's stores, and no frame came out wrong with it or without it in 1,800 frames each; the
hashes cost 1.8 ms a frame of the replay (67 against 75 fps); and a count the CPU resets before the write-back
has landed would keep counting, where the whole copy-in resets it every time.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Under shadow storage the prologue of every part whose shaders use the table brings the shadow of every pool up
to date. It ran the full per-pool sync for each of them, 10,700 times a frame outdoors (3,772 pools, about
three such parts), though the write-watch snapshots of all pools are taken at once just before. A pool whose
regions hold no stamp newer than its shadow is now passed over with a compare per region: 1,500 pool syncs a
frame are left, and the copy-ins went from 1.32 to 1.01 ms a frame of the replay (RTX 5090 with
NX2NAVI_SHADOW=1, one standing run each way).
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Under shadow storage the copy-in reads each region's write-watch snapshot once per submission. The check ran
its two parts in one epoch, so the second part's copy-in did not see the CPU writes made after the first, and
the probe failed with NX2NAVI_SHADOW=1 ("GPU read of CPU-written heap differs"). Each part now starts a new
epoch, as a submission does.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With shadow storage (the Linux default) what the GPU wrote reaches guest memory in the fence's completion
callback, later than an import's store on the GPU. The wait after a frame's first submission returned at the
executed timeline, before that, so the game rewrote what those passes had written and the write-back then put
the GPU's older bytes back over the rewrite. The whole 3D scene came out brighter for single frames, each of
them a frame whose main work was held at its CPU event wait and replayed late.
Standing outdoors with NX2NAVI_SHADOW=1 on an RTX 5090: 695, 624, 443, 323 and 2 flashed frames of 1,800 in
five runs with the split, none in eight runs without it. The frame rate did not drop (74.6 fps median with the
fix; runs of the build before it gave 71 to 72). NX2NAVI_WB_SPLIT=2 keeps the split with shadow storage, to
measure the fault. That this is the flicker a player reported on Linux (RX 7800 XT, RADV) is not confirmed on
their machine; NX2NAVI_WB_SPLIT=0 gives 0.7.1 the same wait there.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The HDR tonemap gains a mapper built on a finite cone response in LMS: scene grey 0.18 lands where the game's curve puts it and rises through it with the slope of the game's curve, and the hue bend of the game's clamp is given back to bright colours. It takes the scene before the game's exposure gain and the gain itself, which the splice now finds in the game's shader. The luminance mapper stays selectable and the game's own curve stays the third choice. The mapper fits the Rec. 709 gamut here, as the game's scene target holds no negative component. New settings: the tone mapper's mid grey, tone slope match, tone slope and hue clip emulation. The gamma correction on the present applies with the luminance mapper only.
Not part of this: eye adaptation, the anti-aliasing and reconstruction shaders, bloom and local exposure sliders, the output colour space choice and a 16-bit float scene target. Checked by build and numerically against the source of the port; the picture on an HDR display has not been judged. THIRD_PARTY_NOTICES.md names the source.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With fewer than six virtual cores a thread pinned to a core at or above the count runs on core (c mod count), and GetCurrentProcessorNumber told it that virtual core's number. The game keys per-core data by the number without locks, so with four cores a thread pinned to core 5 used core 1's data in turn with core 1's own threads, and the game died within seconds of the first frame in play. The Steam Deck profile sets four cores, so this was every start under that profile (issue #445). The call now answers with one of the thread's own cores that fold onto the virtual core it holds, its ideal core first; with all six cores the answer is as before.
The kernel probe gets a test with two threads pinned to each of the six cores: with 6, 4, 3 and 1 virtual cores no thread sees another core's number and no two see the same at once.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
make_game.py passed the map as -Wl,--Map=<game folder>/build-cache/ocarina.map, and -Wl, cuts its argument at every comma: with a comma in the folder's path the part after it reached the linker as an input file and an update ended with "the link failed" (issue #470). -Xlinker hands the path over as one argument. build_game.py already did so on Windows and now does on Linux too.
With MSYS2's clang and ld here, a link into a folder named "a, b" fails with the -Wl, form ("cannot find b/t.map") and writes the map with -Xlinker.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The action prompt at the top right of the HUD draws the four face buttons as a diamond in the console's places: A right, B bottom, X top, Y left. Under pad_layout = xbox, playstation or auto the A action is the bottom button, yet the diamond kept A on the right, so the prompt pointed at the wrong button. At start the runtime now edits the prompt's layout in the shared interface archive for such a layout (the buttons, the dots and the lit crosses move, and the bubbles of X and Y flip) and serves the result from the profile folder; with nintendo, the default, nothing is changed. Every field is found and checked before anything is written, so a layout a mod changed is left as it is, and the archive is packed again with the game's own dictionary at the same unpacked size. One SARC reader and dictionary lookup now serve this, the camera pack and the menu's assets. When the layout changes, the menu's Restart counts the diamond.
tests/action_prompt_check.py passes without game files and on the game's own archive (4 copies, 208 fields, 13 ms at start).
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With shadow storage (the default on Linux and under Wine) what the GPU wrote reaches the game's memory in the completion thread's fence callback, after the executed timeline that the split wait returns at. The game could then rewrite a pool, and an older write-back overwrote what it wrote: in Kokiri Forest a sky coefficient the game had reset came back, and the world flickered and looked washed out. The wait now covers the write-backs whenever shadow storage is in use; with imported or mirrored pools, the Windows default, nothing changes. The contributor's RX 9070 XT under RADV no longer showed the flicker.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A file over pipeline_cache_max_mb starts the run empty, but it was read into memory whole before its size was compared, which is the memory the limit is there to spare on a 16 GB machine. The size is now compared first and a file that is dropped is never read. The limit itself stays at 512 MB: sizing it from the machine's memory, as the contributor proposed, was not run by them or here.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
When Streamline loaded but DLSS Frame Generation was not available, the menu's row read "in use: off, needs an RTX 40 GPU or newer", also on an RTX 5080: the same check fails when the plugin did not load or a function it needs is missing. The row now points to the dlssg lines of the log, where the bridge says whether the plugin loaded and which of its functions it found, and then asks Streamline for its support result on the selected Vulkan device and logs it by name. The query is an optional export, so a bridge DLL of an earlier build keeps working.
The runtime and the bridge (tools/build_dlssg.py, MSVC, Streamline's headers) both build here. The failing case itself was not reproduced: on this RTX 5090 frame generation is available.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Windows charges every committed page to the commit limit whether it is used or not, and the game sizes its whole heap up front: in Castle Town after Hyrule Field the heap held 6.8 GiB of commit of which 3.4 GiB had ever been used. With heap_lazy = 1 a change of the heap's size only moves its end, an access to a reserved heap page commits the reserved runs of the 64 KiB around it in the access-fault hook and runs again, and the paths that do not fault commit their range first: mem_thaw (file reads, the host-pointer import), mem_kernel_access (file writes, the frame-rate fix's read) and mem_host_readable (the host's pointer checks). A page another path committed is left as it is, so a frozen, probed or armed page keeps its protection. With trace = perf a line per window gives the faults, the bytes committed and the time they took.
The contributor's runs on a 16 GB PC: 4.67 instead of 6.77 GiB of heap committed and 29.3 instead of 32.9 GiB of process commit in Castle Town, no "system commit low", 12,858 faults in 440 ms over four minutes, the longest 41 ms. With the setting off nothing is hooked and the heap is committed as before.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
On an integrated Radeon 890M the ASTC scratch buffer failed to allocate and then a staging buffer ended the run. The scratch asks for 32 MiB whatever the upload needs, and the staging pool grows only in 64 MiB blocks of one memory type. When the device reports it is out of memory, the scratch is now tried again at the size the upload needs, and a staging buffer that does not fit the pool is tried again outside it with the same mapping, where a smaller block or another host-visible type may still have room. The menu's own upload flushes what it wrote, since such a buffer may lie in memory that is not coherent.
Built and run through the memory probe (96 GPU checks pass); the out-of-memory paths themselves were not reached here.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With the page file left to Windows the commit limit stays near the installed memory plus what the file held at the start, and on a 16 GB PC with a 16 GB card it ran low in Hyrule Field at 32 GB, where a fixed page file of 32 GB or more gave 49 GB and no low commit. The first "system commit low" line of a run is now followed, once, by a line that names the cause and the Windows setting, and the build kit's guide gives the same advice for 16 GB PCs. plat_page_file_managed reads the PagingFiles value once; on this PC (page file sized by Windows) it returns 1.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Windows charges a card's memory to the process's commit, and the bound on that commit defaults to the installed memory, at least 24576 MB. On a 16 GB PC with a 16 GB card (RTX 5060 Ti) the process stood at 29 to 31 GB in Hyrule Field, 9 to 10 GB of it video memory, so the bound held for the whole area while the system had commit to spare: textures gave way and the ground flickered white. The bound now compares the commit less the device-local memory in use, which is on the card and not in RAM or the page file and is bounded by the video memory rules already; the contributor's runs then never reached the bound and dropped no texture. The log line gives both figures.
A PC whose process commit is large mostly through video memory is no longer caught by this bound; the system's own figure still is. Not reproduced here: this PC has more memory than the bound.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The prompt overlays for the pad layouts repeat the same note pictures, and every one was fitted and encoded to ASTC again for each layout. The encoded bytes are now kept for the build under the picture and its box. With stand-in pictures, 42 note textures over seven layouts came out byte for byte the same from 12 encodes instead of 42, in 0.66 s instead of 2.30 s.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A new depth or stencil image was cleared in the upload batch, which runs before the whole part being recorded. Bound into pool memory, the image shares its bytes with the live texture at its address, so the clear could wipe depth that earlier draws of the same part still read: the sun's shadowing went fully dark for one frame a few times a minute where the game resizes its shadow maps. The clear now goes in at the replay's position, as it already did for reused images (depth_init_inline, default 1; 0 is the old order). The switch that copied the live image's depth into the new one is removed: every such image was cleared by the game before anything read it, and the copies cost smoothness.
From a contributor's diff and measurements at a town gate: 0 dark frames in 5,423 with the change, 12 in 2,728 without. Checked here on the combined build in Hyrule Field before the Market's gate: every new depth image is started at the replay's position, none in the upload batch, and none had to end an open pass. The dark frames themselves were not counted here.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The shader step's progress event rounded its share to four decimals, and the launcher shows the whole percent below it: 42,140 of 42,142 shaders built read as 100% while a long driver compile was still running. The event now carries the share as computed, so the bar stays at 99% until the count is complete. The test feeds the last counts of a 100,000-shader build and fails with the rounding.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game opens two input streams while it starts and leaves both stopped through ordinary play, and each open took the system's default recording device and held it, paused, until the game ended: Windows shows the microphone as in use for the whole session, and a Bluetooth headset can drop to its call profile. An open now checks that a default input exists and prepares the stream and its bounded buffer; the device is opened at StartInputStream and released at stop or close, after which the game can still read or purge what was buffered. A start that is refused returns an input error and can be tried again.
tests/audio_input_check.py did not compile on this line (it had no stand-in for the microphone setting); with the change it builds and passes: idle streams hold no device, a refused start can be retried, a stop releases the device and keeps the unread frames, two streams are independent. Not checked with a real microphone in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
That driver faults inside vkCreateGraphicsPipelines when it links the stage libraries of a burst of new pipelines. The game asks for one when an enemy dies and its effects are drawn for the first time, so the game ended with code 71 at every kill on an RX 6700 XT and an RX 5700 XT (issue #418), and the player who reported it found that gpl = 0 stops it. Unset, the setting is now off with that driver (vk_caps.amd_sc) and on everywhere else; gpl = 1 turns it on there, gpl = 0 off anywhere, and the caps line of the log says why it is off.
The price on those cards is that a new pipeline is built whole on the draw's path. Not run here: there is no AMD card. On an RTX 5090 the device probe reads "gpl yes" as before and "off by NX2NAVI_GPL=0" with the setting.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
bin/ at the top of a checkout is the release folder that tools/make_release.py writes and the build reads (the shader translator with its id file, hactool, ninja and the DLLs). Its exe and DLL files were ignored already; the translator's id file was the one that showed up as untracked.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
An indirect mesh draw reads its workgroup count through a ring entry that a buffer copy fills, and a copy cannot be
recorded inside a pass: every such draw ended its pass, 45 times a frame in a village. The first draw of a run now
fills the entries of the mesh draws that follow it with only state, draws, counter reports and render conditions
between them, and those draws stay in the pass (mesh_ahead, default 1; 0 is the old way, ab switches in A/B blocks).
An entry is taken only by the draw it was filled for, at the same record address, while no other op was replayed
since. Counter reports count as staying in the pass because the replay closes their query inside it and writes the
value from the completion thread; the game reports one after most of these draws, and without that only 38% of the
draws were served.
Measured in the village: 42 of the 45 draws a frame are served by an entry filled ahead; gaps with these copies
41 to 3 a frame (0.22 to 0.04 ms of GPU time); passes and dispatches 248 to 208 a frame (302 to 254 in Hyrule
Field). With the piece release of the commit before, one run each: village 142.6 fps and GPU busy 3.87 ms (138.0
and 135.4 fps, 4.15 ms without this change), Hyrule Field 136.8 fps and 4.34 ms (131.5 and 131.3, 4.70 ms). In A/B
blocks of one run with the narrower rule (counter reports still ending a run) the GPU's busy time went from 4.81 to
4.64 ms.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With the lazy write-back on, a village and Hyrule Field still merged 20 to 29 MiB a frame back into guest memory at
the end of every submission, inside the GPU work the game's fence waits for. The new log line (mem: lazy write-back
at frame N: written back and not armed since the last line) names the reason by bytes: none of it lay in frozen
regions or on pages that could not be armed; it lay in regions held after a touch. The game's CPU reads a few words
at the start of buffers its shaders fill (12 bytes into ranges of 6.3 and 15.2 MiB among others), about once a
second. Each read gave back the whole armed range and held every 2 MiB region it reached for 1 s, doubling to 32 s,
and nothing was armed in a held region.
A touch now gives back the 64 KiB around its address, fetched alone, and holds only that piece; the rest of the
range stays armed (wb_lazy_chunk, default 1; 0 is the old rule). More than four touches in one region within a
second are taken as a reader going through the range: that range goes whole and its regions are held as before,
and the region's touches go that way at once while it keeps being touched within a minute. Each of the first eight
touches of a log window is logged under the perf trace with its thread, address, range and what was given back.
Measured on one machine (NVIDIA, uncapped, frame generation off, scripted walks, medians over the windows of 46 s
of world clock):
- village: 121.8, 124.1 and 124.4 fps before; 138.0 and 135.4 with this change; GPU busy 4.8 to 4.15 ms a frame
- Hyrule Field: 101.1 and 113.1 fps before; 131.5 and 131.3 after; GPU busy 6.5 to 4.7 ms
- merged a frame: 20 to 29 MiB before, 1.7 to 2.0 MiB after
- faults on armed pages in 1,000 frames: 14 and 16 before, 17 to 18 after in the village; 19 and 23 before, 17 to
21 after in Hyrule Field; time spent fetching the same (4 to 5 ms in 1,000 frames)
A run with synthetic reads of four armed ranges per log window (wb_lazy_touch = 4, 769 faults) ended without an
error. The picture of every presented frame of a village walk and a field walk (thumbnails, 10,131 and 9,531
frames) had no black frame. The village walk has single frames whose brightness jumps: 14 with the change and 28
without it in about 10,000 frames each; the two looked at, one of each, are jumps of the camera.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The launcher asked for 31 GB where the build's own check now asks for about 34, so a disk between the two passed the first check and was refused seconds later. Both say 34 GB now. The build no longer asks for the whole shader preparation's space when the game folder already holds translations. The texts said 10 to 25 minutes for an install that took players 27 to 41, and 5 GB for a build cache that measures 1.6. A build error's message goes into the launcher's log as one line.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The test of a game folder outside the Basic Multilingual Plane compiled
the whole generated file with the first C compiler it found. The
runtime's headers need clang, so with gcc as that compiler the test
failed on them, not on the paths. It now compiles the four strings alone
with whatever compiler there is, and the whole file when that is clang.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
pad_prompts.py gave each packed game file to the decompressor in one
call, which returns one bytes object grown by copying. On made-up data
of the size of the interface texture archive, 69 MB packed and 244 MB
unpacked, that takes 21 s on a fast PC; players' builds waited 44 to 52 s
before the step's first folder, most of its minute. In 64 KiB pieces
joined once the same bytes take 0.3 s.
The prompts step's key held the digest of the three scripts' bytes, so
this edit would have drawn every install's prompts again, as two of the
last four releases did. It now holds a constant changed by hand, whose
value is the scripts' digest in 0.7.0 and 0.7.1, and a test fails when
the scripts' logic changes, to ask whether the constant must change.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Only the RomFS image's space was looked at, and only when that step
began: a disk that held the image but not the build cache or the shaders
stopped the build in the compile or, half an hour in, in the shader
preparation. The build now adds up what the steps it will run write into
the game folder (the image and 1 GiB, 2 GiB for the build cache, 4 GiB
for a full shader preparation, the least each is known to need) and
stops at once when the disk has less, naming each part and how much is
missing.
On Windows a build whose compile step will run first compiles and links
an empty program with the installed tools, against the libraries the
game links. Tools that are incomplete or blocked stopped the build only
in its compile step, after the image and the lift; the message says what
failed and how to get the tools back.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
romfs_check.py gave the decompressor 4 MiB of a file at a time. Each call
returns its output as one bytes object grown by copying, under the
interpreter's lock: on 32 MiB frames that ran at about 120 MB/s of packed
data on twelve threads, and at about 2,500 MB/s with 64 KiB pieces; on a
1 MiB file at 490 against 3,000. Files smaller than a piece are as fast
as before. The check now stops at the frame's end, so what it says of a
file does not depend on the piece size; a test compares both sizes and
the check as it was on damaged, cut and whole frames.
The scan step's key held the sha256 of the script's bytes, so this edit
would have made every install check its 26 GB again. The key now holds a
constant changed by hand, whose value is the sha256 the script had in
0.7.0 and 0.7.1: the key of every install that passed stays what it is.
A test fails when the script's logic changes, to ask whether the constant
must change.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
modules_c wrote the paths of the game folder as C strings with JSON's
default escapes, which turn a character outside the Basic Multilingual
Plane into two surrogate escapes. C refuses those ("invalid universal
character"), so a game folder with an emoji or a rare Han character in
its path failed at the end of the compile. The characters now stand as
themselves in the UTF-8 source, and a test compiles the generated file.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Every selection of the Updates row started a request to GitHub, which
allows an address 60 an hour: a player who selected it 25 times in 90
seconds had every check of the next hour refused. The row and F5 now
start no check within a minute of the last one.
A refused check said "try again in an hour" whatever the answer held. It
now names the time from the answer's X-RateLimit-Reset or Retry-After.
A failed check wrote two tracebacks, 22 lines, into launcher.log each
time; a FeedError is now one line with its message and its cause.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
build.Run read the build's output on a thread that ended on the first
exception of a line or event handler, such as the launcher's log on a
full disk. Nobody read the pipe after that, the build stopped at its next
line once the pipe was full, and the job waited for it for good. The
thread now counts the line as dropped and reads on, and Context.log loses
a line it cannot write instead of raising.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
That build kept the game's own decoder until its sites had been through a check run. The check has now run over a village and a field: 3,072 streams and 31.7 GiB of output compared byte for byte, none different. The game's decoder took about a fifth of the running time of the game's threads in a village and about a second of each area load. zstd_native = 0 keeps the game's decoder.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The build compiles on every processor for ten minutes and more while the
job screen invites the player to keep using the PC. build.Run now starts
make_game.py with Windows' below-normal priority class, which the
compilers and the other processes the build starts take over from it, so
the build gives way to what the player does and loses nothing on an idle
PC.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
make_game.py ran one compile per logical processor whatever the memory.
Without --jobs it now runs as many as 80 % of the free memory holds at
768 MiB a compile, the peak build_game.py records for one, never more
than the processors and never fewer than one, on Windows and Linux alike.
The build's first lines say the number and what decided it.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game exits with 70 after a FATAL line of its own and with 71 after
its crash report, and the launcher said only that the line near the end
of the game's log names the error. It now reads the last FATAL line of
the run from logs\nx2navi.log and puts it into the home screen's message
and into launcher.log, so a launcher log a player sends says what the
error was.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The check printed its counts into the build's lines only, so a player
whose build ended with "4 damaged, 3 given a stand-in, 1 left as they
are" saw nothing of it. A job now reads romfs-check.json after the build:
the count goes into the step's row, and when the check ran in that job, a
sentence goes onto the home screen and into launcher.log.
The same four files are flagged on every copy of the game, and three of
them get a stand-in. For those the sentence says so and that nothing
needs doing; other files are counted and romfs-check.json is named.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
An exception make_game.py did not report itself only printed a traceback,
and the launcher showed "the build stopped (exit code 1)". main now sends
every such error through fail with the exception's message (the system's
text and the file for a file error, the full disk named as such), and the
traceback still goes to the log.
A dump whose data does not match its own checksums ended the RomFS step
that way. The step now names the damaged file and says to copy or dump
the game again, and it removes the partial image of a failed run.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The Updates row promised that an update rebuilds the game "in a few
minutes". The code cannot keep that: a version that changes the lifter
compiles the game's code again, and one that changes what the shaders are
built with builds all of them into the driver's cache again. Players'
updates took 24, 34 and 45 minutes. The row now says it takes a few
minutes when little changed and half an hour or more otherwise.
The warm-up of the driver's cache after an update only builds, but its
count was drawn in the second half of the bar as in a full preparation,
so a 20 minute run read 50 % in its first second. Its count now fills the
whole bar, and the row says so while the shader cache is packed before it.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The default was off only on AMD's driver branch for RDNA 1 and 2, on the grounds that builds with the default on had been measured on an RX 7900 XT. Those measurements were standing in Hyrule Field and walking through a village; the report this is about is of a game that ended in fights, on an AMD card the player did not name, and fights are where the lazy path is busiest. Nobody has played one on an AMD card under our eyes on either branch, so the exception is now AMD's own driver as a whole (wb_lazy_choice.h, by VkDriverId), until a card of each branch has played fights with wb_lazy = 1 and a log to show. The cost is the open-area frame rate of 0.7.0 on every AMD card under Windows; the RX 7900 XT figures in the draft notes come from builds that had it on by default, which the notes now say. wb_lazy = 1 still turns it on.
--probe-vkdevice prints the line a fatal error or a crash adds to the log, so its wording can be read without a failing run. On an RTX 5090: "fatal: gpu NVIDIA GeForce RTX 5090, driver NVIDIA "621.01" version 621.1.0.0; memory mode mirror, lazy write-back on (the default on Windows (wb_lazy = 0 turns it off)); texture detail not chosen yet (no texture made)", and with the reporting player's nx2navi.ini beside the exe "lazy write-back off (wb_lazy = 0 is set)", after a start whose log names async_compute, vram_safe_mode and exception_handler as no settings of this version.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A step that runs drops the record of every step after it, and the RomFS
step comes before the lift although the lift reads only the unpacked
ExeFS. An install that was cut short while the image was still being
packed, the lift beside it already done, therefore lifted the whole game
again at the next try. The RomFS step now leaves the lift's record; the
compile and the shaders, which read the image, still follow it.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
compile_all wrote the object cache only when every file was done, so
Cancel or a crash in the middle of the compile lost the record of every
object and the next run compiled the whole game again. The cache now goes
to disk every 25 objects, at most every two seconds, moved into place
whole. Results are taken as the compiles end instead of in the order they
started: the largest file starts first, and in that order nothing was
recorded until it had finished.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>