Commit Graph

105 Commits

Author SHA1 Message Date
chrg6
87bb179c78 Keep released textures for one minute and up to a thirty-second of the video memory budget.
The textures the game lets go of were kept for three minutes and could hold a quarter of the card's budget, up to
8 GiB with room. A run through Hyrule Field shows what that bought and what it cost (RTX 5090, 5120x2160 with DLSS
Performance, about three minutes of running; the game keeps 4.8 GiB of textures live and loads about 190 a second):
the released textures held 5.3 GiB on average and the video memory in use went from 11.1 to 17.9 GiB, while the
game took back 1,494 MiB of them within 10 s of the release, 171 MiB within a minute and 10 MiB later, beside 33,000
textures it loaded anew. A shorter hold alone gives nothing back: with 20 s the released textures fell to 0.5 GiB
and the free space inside the allocator's blocks rose to 4.9 GiB, since a block returns to the driver only when it
is empty. What the released textures hold at their fullest is what the session costs, so the bound is the lever.

The bound is now a thirty-second of the budget, 384 MiB to 1 GiB (vk_tex_release.h trl_cap_mb), still doubled while
the card and the commit have room, and the hold 60 s, 120 for content only the GPU made. The same run with the new
defaults: 13.2 GiB in use on average against 16.7, 13.8 at most against 17.9, 532 MiB of textures made again over
the run, 77 fps against 75. An 8 GiB card keeps 384 MiB where it kept up to 1.9 GiB.

tests/tex_release_check checks the bound by the budget and the sessions it simulates against the rule before.
Compaction (tex_compact) and 16 MiB blocks were tried on the same run and gave back 0.7 and 1.2 GiB; neither is
changed here.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-14 08:33:01 -05:00
chrg6
1d0327acd1 Run a parallel group's pass hooks once, at its first chunk's first pass.
With Helpers take small jobs on (replay_small, with replay_pipe) the whole scene flashed for single frames under
DLSS, with the interface intact. The pass hooks keep what the last pass that ran them left: the upscaler's light
target is the one of the last scene pass before the output pass. A group's hooks run in its first chunk, and a pass
that chunk began again (after a barrier, or a texture lookup that waited for its turn) ran them a second time. With
the submitting thread already past the group, that came after the hooks of later passes and put the group's own
target back, so the upscaler took an earlier image of the frame for that frame. The log showed it: the light target
changed to another image and back at each flash.

The rule is in runtime/vk_pass_hooks.h, with tests/pass_hooks_check, which fails against the old rule.

Measured by replaying a bug capture in Kakariko (DLSS Performance, 3 workers, replay_pipe = 4, replay_small = 16,
100 s a run): 51 and 52 flash frames as installed, none with replay_small = 0, none with the helpers off, 52 with the
render target reuse off. Two copies of the installed build made the same way, one with this change and one without:
no flash frame in two runs with it, 373 in one run without.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-14 06:44:38 -05:00
chrg6
7a8bbad47e Remove the low-end GPU mode from the settings.
The user asked for it: the mode no longer gains frame rate, and the mesh shader fallback covers the cards it was written for. Its switch in the settings menu's Game tab is gone with the rows under it, and so are their 57 text ids and strings.

low_end_gpu itself does nothing any more. It is still a known key, so an older nx2navi.ini gives no unknown-key warning, and while it is on the log says once that the mode was removed in 0.10.2. The preset that gave nine keys other defaults is gone, and so is the rule that read the mode's keys only while it was on: each of them (mesh_emulation, tex_clobber, foliage, vram_heap_limit, vram_reserve_mb, upload_batch_mb, mirror_stage, mirror_hot, submit_finish_gpu and the others) is an ordinary setting with the default of its row or of its reader, so a line a player wrote by hand keeps counting and a file with only the switch runs the game as it runs for everyone else. guest_opt in nx2navi.ini counts for the next rebuild without the switch too (tools/make_game.py).

The recorder thread read the switch itself: on an AMD card without mesh shaders the mode turned it on. It is off on every AMD card now unless vk_recorder = 1 is set.

nx2navi.ini.example lists the former mode's settings as single settings, the 0.10.2 notes have a Removed entry and name the foliage fix of the commit before this one, and the comments that said what the mode sets say so in the past tense. tests/cfg_parse_check has the new reading of the switch and of the keys without it; the test matrix is at 90 ok with the same two not ok as before (installer_test, worktree_test), and a clean build compiles 169 runtime files and links. Not run in the game.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-14 06:13:18 -05:00
chrg6
bbeecce88c Never take the mesh emulation on an NVIDIA card, where it ended the game inside the driver.
The low-end GPU mode sets mesh_emulation = 1, and on a card without mesh shaders the emulation then draws the game's task and mesh programs in place of the mesh fallback. On NVIDIA's cards without mesh shaders that ended the game at the first mesh draws of an area with an access violation inside the driver, at nvoglv64.dll+0x10cdffe on a GTX 1050 Ti and on a GTX 1070 (both 0.10.1), and a Titan X (Pascal) report names the same mode. The GTX 1050 Ti's owner set mesh_emulation = 0 and played on through the fallback with the rest of the mode on.

The decision (vk_mesh_path.h) takes the card's vendor: an NVIDIA card is drawn for as if the emulation were not asked for, and the boot line says so. The replay and the pipeline code read the decided path from the device context where each read the setting itself. tests/mesh_path_check.c has the new cases.

Not run in the game: no GTX 10 card here. mesh_path_check passes and every file that includes the changed headers compiles.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-14 05:27:59 -05:00
chrg6
516bfa6fb0 Start the game when DLSS Frame Generation is on and the chosen graphics card is not an NVIDIA one.
Four players of 0.10.1 could not start the game again after changing settings: "no usable Vulkan device", exit code 70, until nx2navi.ini was edited or removed by hand. One log shows the case: a laptop with an RTX 3050 and Intel Iris Xe graphics, framegen = dlss and gpu_index = 1, the Intel one. With frame generation on, the device is made through Streamline's interposer, which asks it for VK_NV_low_latency2 and failed with VK_ERROR_EXTENSION_NOT_PRESENT, and nothing else was tried.

A chosen card of another vendor now counts as not usable while the interposer is in use, so the best usable card is taken, as for a chosen card that is gone. Where the card in use is still not an NVIDIA one, or the interposer fails to make the device for another reason, the loader makes it and frame generation is off for the run: the log says why and the settings menu shows it as unavailable, as it does when Streamline's files are missing.

Not run: no PC here has two cards of different vendors. The changed files compile.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-14 05:26:01 -05:00
chrg6
fed7aca7fc Leave Helpers work ahead and Helpers take small jobs off by default, as in 0.10.1.
0.10.2 was to turn replay_pipe = 4 and replay_small = 16 on by default. A tester measured those two with five replay workers against the defaults on an RTX 3090, standing at eight places in Hyrule Field and at Lake Hylia with the default run repeated (within 3 %): slower at four of them (50.1 instead of 58.1 fps at one) and level or at most 7 % faster at the other four. The user decided to leave both at 0. CPU helper threads stay Automatic and Start next frame early stays on, as 0.10.1 shipped them; the notes and nx2navi.ini.example say so.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-14 05:18:15 -05:00
chrg6
6ababe8275 Let the automatic texture detail choose full from 12 GiB cards on, and never on an integrated GPU.
auto chose full from 8,192 MiB of video memory budget, which is the cards of 10 GiB, and went by the budget alone. Two reports on 0.10.1 say that is too much. A tester filled a 24 GiB card to the room of an 8 GiB one and toured eleven areas at 2560x1440: with full, the driver counted more than the card had (the textures and the free space the allocator's blocks keep, which the pressure check leaves out), memory went to system memory, and the tour ran at 29.6 fps with a 1% low of 11.4; with reduced, 42.8 and 36.4, and nothing spilled. And a handheld's integrated GPU reported a budget of 10,361 MiB, which is a share of its 16 GiB of system memory: auto chose full and the game ended when a save was loaded, until its player set reduced.

Full now starts at 10,240 MiB of budget, the cards of 12 GiB (one reported 11,313 MiB in a player's log), and an integrated GPU gets reduced at most by auto. The log line says so when it applies, the settings menu's automatic entry names the level as before, and a level the player set stays.

Not run in the game. The file compiles and the content check passes.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-14 05:12:10 -05:00
chrg6
787b7c73de Leave a patch of grass out whole while its colour draw waits for a pipeline on the mesh shader fallback.
The game draws a culled list of grass or leaves twice from one indirect record: into the depth target alone, then into the colour targets. On the mesh shader fallback each draw has compute modules and a pipeline of its own, made at its first draw, and the depth-only one is ready first. Drawn alone it left the list's depth in the scene with nothing drawn over it, so what lies behind failed the depth test there and the sky's colour showed through the ground in the shape of the grass for as long as the colour draw's pipeline built, which is seconds each on AMD's driver for Radeon RX 6000 and older, where the fallback is the default.

A colour draw skipped for its modules or pipeline now stamps its record's address with the present, and clears the stamp when it is drawn. The depth-only draw of a record stamped within the last two presents is skipped as well, counted like a draw whose own pipeline is building. A draw whose stages write memory is never held. mesh_fallback_hold = 0 draws the depth alone as before.

Not run: no card here takes the fallback by default, and the game is the user's to start. The changed file compiles and the settings table's check reports 0 problems.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-14 04:35:10 -05:00
chrg6
f7a2d94813 Bring public main's video memory fix and 0.10.1's defaults into the 0.10.2 line.
Main gained three commits after 0.10.1's release commit: a render target that was drawn over gives its image to the next target of its size, such an image is handed on after 8 presents and freed after 32 while the card is past its pressure share, and 0.10.1 kept CPU helper threads on Automatic and Start next frame early on. The settings keep this line's defaults (Helpers work ahead 4, Helpers take small jobs 16), the comments that said both were off in 0.10.1 now say what 0.10.1 shipped, the texture log keeps both sides' counters, and 0.10.2's notes say which two defaults are new.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-14 04:20:32 -05:00
chrg6
69ab33d1f1 Turn the Game tab's Testing settings on by default for 0.10.2, as the user asked: CPU helper threads Automatic (replay_workers = auto, which gives none on four cores or fewer and none on AMD's driver for RX 6000 and older), Helpers work ahead 4 (replay_pipe), Helpers take small jobs 16 (replay_small) and Start next frame early On (tail_early). A value a player set in the menu or nx2navi.ini stays; the notes say how to go back to 0.10.1's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 03:20:37 -05:00
chrg6
86d672ceea Make the release 0.10.2, with its notes: the stability and frame-pacing pass, the translator built from the release's own sources (the see-through ground of issues #569 and #824), the AMD device-loss fixes, and the items the user approved.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 21:32:45 -05:00
epicmeme546
5ae55db41c Keep CPU helper threads on Automatic and Start next frame early on by default in 0.10.1, as in 0.10.0, and give 0.10.1's notes the video memory fix.
The release commit for 0.10.1 had turned both off by default (replay_workers = 0, tail_early = 0). They stay as 0.10.0 has them: replay_workers = auto, half the processor's physical cores less one (3 on 8 cores), and tail_early = 1. A player's session with all four Testing settings at 0 filled the video memory as before (bug capture 7: 15.5 GiB in use, 20.7 frames a second); what filled it were the images of moved render targets, which the two commits before this one fix.

runtime/cfg.c, runtime/ui/menu.cpp, runtime/vk_exec.c and nx2navi.ini.example are back as they were at 0.10.0. The notes of 0.10.1 lose the entry about the defaults and take the fix's entry from the draft for 0.10.2, which goes.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-13 11:57:11 -05:00
epicmeme546
1dbecd464f Hand an overwritten render target's image on after 8 presents while the card is past its pressure share, and free the ones no texture took after 32.
At 3840x2160 the targets moved in 16 presents hold 3.1 GiB, which a 16 GiB card does not have beside the 10 GiB of a town. A mark reaches its entry within three frames of the draw (four read-back copies, one every four submissions), so eight presents without a stamp are enough there. The early drop waits four times that: at ten presents it took the images the reuse was about to hand on (7,301 dropped, 7,672 made, 5,226 reused in one run); at 32 the same run made 3,338 and reused 8,004.

The walk from the bug capture at 3840x2160 with the budget taken as 13.2 GiB, a 16 GiB card's: 10.9 to 11.4 GiB in use, at most 1.6 GiB of released targets, no image that could not be made and none in system memory. A player's log from such a card at that size had 12.2 GiB of released targets and 22.2 GiB in use at 2 frames a second. Without the budget, at 3416x1440: 10.0 to 10.7 GiB, as before this change.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-13 11:49:48 -05:00
epicmeme546
217fb32f6b Let a render target that was drawn over give its image to the next target of its size, so video memory no longer fills up while the camera moves.
The game lays its render targets out anew in every frame with a linear allocator. A shadow map among them changes its size with the view (1141x1141 to 1917x1917 in Kokiri Forest, a texel or two a frame), and every target behind it then lies at a new address in each frame. The entries at the old addresses are marked overwritten and released, and their images are meant to go to the next textures of their parameters (create_tex). They did not: the game finalizes a moved target's texture object only when it needs the object again, until then the object's slot holds the entry, the pool stamps every GPU-owned entry a slot holds as used in each submission (pool_touch), and the slot names it (slot_names). By those two rules the image stayed, each frame made about a dozen new images, and the released ones waited 120 presents or more: 6.7 GiB at 3416x1440 and 12.2 GiB at 3840x2160 on top of the area's 10 GiB.

An overwritten entry is now judged by what drew with it or sampled it (samp_frame, sampled_lately) while the pool's marks tell what the shaders sample, in the image reuse and in drop_overwritten. A marked slot whose own entry is released stamps that entry too. The reuse looks at up to 1024 released entries of a parameter set instead of 128. Past the VRAM pressure's share of the budget by the driver's own figure, which counts the holes in VMA's blocks, overwritten entries nothing sampled go after 18 presents instead of 600.

Measured on an RX 7900 XT from a player's bug capture in Kokiri Forest (walking 28 m from the save, then laps, the game's own camera): 15.9 GiB of device memory in use before and 12.3 to 14.3 GiB on the laps, 6.9 GiB of it released targets, 6,970 images made and 645 reused; 9.7 to 10.6 GiB after, at most 2.2 GiB released, 3,609 made and 8,821 reused, no image that could not be made. With the budget taken as 12.5 GiB the early drop took 3,740 entries and the use stayed under 10.6 GiB.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-13 11:49:41 -05:00
chrg6
a84a3ab12d Make the release 0.10.1: every setting under the Game tab's Testing heading is off by default again, CPU helper threads (replay_workers = 0) and Start next frame early (tail_early = 0) among them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 10:49:01 -05:00
chrg6
5190f8e932 Make the release 0.10.0, with its notes; the notes of the unreleased 0.9.3 are folded into them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 09:53:26 -05:00
epicmeme546
f5da269add Remove the experimental co-op through Steam.
This takes back the three commits that added it (cd2f9f1, e60677e, a01910d): its runtime layer and Steam binding, the Co-op tab and what it drew over the game, the launcher's copy of Steam's library file, its settings, tests and docs. The tree is as it was before them, with the bug capture that came after kept: its note on screen no longer makes room for co-op's lines, and dbg_area, which the co-op had brought and the capture uses, stays.

The four settings of that co-op join the retired names, so a settings file that still has them logs no unknown key. A steam_api64.dll that the launcher put beside the game is left where it is: nothing loads it any more.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-13 09:08:40 -05:00
epicmeme546
4fd70e398f Make F8 write a bug capture and add a test run that starts from one.
F8 now always writes a folder under logs/captures: the area, Link's position and rotation, the camera of the frame on screen and the game's own, the presented frame as a PNG, frame times around the press, the machine, the settings that differ from the defaults, the end of the log, the save, and the game's flags and texts. A note on screen names the capture. The flight recorder's F8 dump goes into the capture's folder.

NX2NAVI_CAPTURE_REPLAY starts a run on a capture's settings, teleports to its area, walks Link to where he stood and puts the free camera where the camera was; tools/capture_run.py prepares the profile from the capture's save, runs it and compares the two captures. docs/bug-capture.md has the files and the steps.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-13 06:22:18 -05:00
epicmeme546
a01910d905 Give the new co-op's switch a name of its own, so an old "coop = 1" turns nothing on.
The Steam co-op took the setting name of the old beta's switch, coop. A player whose nx2navi.ini still had coop = 1 from that beta got the new co-op switched on at the first start of the new build, unasked: the game signed in to Steam as its test app. The switch is now coop_steam (NX2NAVI_COOP_STEAM), off by default, and coop is a retired key like the old co-op's other settings: known, read by nothing.

--probe-cfg now loads a file of the old co-op and checks that its keys are no unknown keys, that coop = 1 leaves the new co-op off, and that coop_steam = 1 turns it on; it passes on a build of this commit. The game itself was not started with the change.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-13 05:30:56 -05:00
epicmeme546
e60677ed87 Have the launcher put Steam's library file beside the game, so no player fetches it for co-op.
Co-op loads steam_api64.dll from beside ocarina.exe, and the repository may not hold that file. Before Play and before a start from the Steam shortcut, when the file is not there, launcher/steamlib.py now copies one: one a release ships in its bin folder if it has one, else the newest one in the games of the player's own Steam libraries that Valve signed (WinVerifyTrust and the signer's name) and that has every call runtime/steam.c uses. Nothing is downloaded, the search takes a second or two once, and with no Steam or no suitable file the game starts as before and the Co-op tab says what is missing. The tab's two texts about the file say so in the four languages.

Checked: four new tests on made-up library folders (too old, unsigned, too deep, a second library, a shipped file first, none said once) and the launcher's 190 tests pass; on this PC the search found 40 files in 1.2 s, 25 suitable, and copied a Valve-signed one; that file's library version, an older one than the game was run with, signs in as app 480 and makes a lobby in a program without the game. Not run: Play in the launcher itself with this change.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-13 04:24:56 -05:00
epicmeme546
cd2f9f12be Add an experimental co-op through Steam: rooms, invites, names in the world, chat and shared progress.
Up to four players, each in their own game and save, meet in a room. Rooms are Steam lobbies and the games talk through Steam's networking, so nobody forwards a port and nobody runs a server. The game signs in to Steam as its test app (480), so Steam shows the player as playing Spacewar. Off by default; the menu has a Co-op tab with Create a room, Join a room by its ID, Invite a friend, the players, chat and Leave, in English, Russian, Brazilian Portuguese and Simplified Chinese.

runtime/steam.c loads steam_api64.dll from beside the exe at run time and declares the C functions it calls itself; nothing of the Steamworks SDK is in the repository, and a player copies the file from a Steam game they have. runtime/coop.c is the room: the lobby's owner is the host, lets games of the same protocol and game build in and lists them, and every game takes positions, chat and progress only from the players on that list. runtime/coop_game.c reads Link from the Player actor and shares progress, items, songs and quest items through the game's own flag routines, each value only ever raised; small keys, rupees, ammunition and hearts stay each player's own, and the save is copied to coop-backup before anything of a room reaches it. The other players show as a name with a distance where their Link stands, projected with the upscaler's camera.

One Steam account cannot be in a lobby twice, and this PC has not the memory for two games, so the room and the game side were run with one game and tests/coop_peer.py as the second player over runtime/coop_local.c, a stand-in for Steam on 127.0.0.1 that only the environment turns on: the peer was let in, saw the game's Link in Hyrule Field, chat went both ways, the save was copied, one flag the save lacked was set and a flag the game does not share was refused. On Steam itself one game signed in as app 480, made a room, showed its ID and the player's Steam name on the Co-op tab and left. Not run: two Steam accounts in one room, an invite, a join by room ID over Steam, a host that leaves, a removal, and the menu's text probe on this build.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-13 04:16:17 -05:00
epicmeme546
c84c035939 Remove the co-op of 0.8.0: its runtime layer, relay, menu tab, settings, tests and docs.
The hidden beta shared story progress through a relay a player had to run and never showed the other players. A new co-op replaces it. Gone are runtime/coop*.c and their headers, the menu's Co-op tab and its texts in four languages, tools/coop_relay.py, the co-op tests, docs/coop.md, the [coop] section of nx2navi.ini.example, the --probe-coop mode, the coop trace item, and Monocypher, which only this layer used.

The old settings stay known as retired keys, so an nx2navi.ini that still sets them logs no unknown key, and they stay on the list of private settings, so a bug report keeps a room's secret, a relay's address and a name out. The platform layer's UDP sockets and fs_save_snapshot stay for the new co-op; cfg_ini_now and fs_profile_path, which nothing else called, are removed.

Checked: the game builds and starts, the menu shows its four tabs, --probe-cfg and --probe-fs pass, and the launcher's private-settings test passes. tests/save_share_check.py builds without its co-op stub; it cannot run from this worktree because the folder's path is longer than Windows allows, on main too.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-13 03:37:26 -05:00
epicmeme546
d4778b1bb0 Make the Helpers work ahead and Helpers take small jobs rows number sliders again.
The rows keep their plain names. Their descriptions now say what the number counts and that 0 turns the setting
off: 0 to 4 for replay_pipe, 0 to 64 in steps of 4 for replay_small.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-13 00:30:04 -05:00
epicmeme546
cb5965d14e Name the Testing rows of the performance settings in plain words and make two of them switches.
The rows are now CPU helper threads, Helpers work ahead, Helpers take small jobs and Start next frame early, each
with a short description of what it does and what it gained. Helpers work ahead and Helpers take small jobs are
switches: on writes replay_pipe = 4 and replay_small = 16, the values measured best, and another value set in
nx2navi.ini shows as on and stays.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-13 00:24:38 -05:00
epicmeme546
3d61c33b8b Give the other experimental performance settings rows under the Game tab's Testing heading.
Worker groups in flight (replay_pipe), Small groups to one worker (replay_small) and Early frame end (tail_early)
sit under Replay workers. A row whose setting does nothing without another one is greyed out and says which it needs.
The example settings file and the draft release notes name the rows, and the notes gain the replay_pipe and
replay_small entry.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 23:58:52 -05:00
epicmeme546
aec5e72051 Let the game go on while the GPU runs the end of the last frame, with tail_early = 1.
The game waits each frame until the GPU has finished the frame before. In Hyrule Field with FSR 4 the last of that
work is one part of 4.7 ms, the temporal upscaler and the interface drawn after it, then 1.4 ms of write-backs, and
what the game reads of the frame is done before the upscaler runs. With NX2NAVI_TAIL_EARLY the replay records that
tail into a command buffer of its own, and when it hands the CPU nothing but timestamps, writes no pool memory but
inline uniform updates of mirrored blocks and reads no guest memory late, the write-backs go to the queue before it
with the executed timeline's signal. The game's waits end there, and the GPU runs the tail while the next frame is
prepared. The GPU's commands are the same; a tail that fails a test goes as before. Off by default.

RX 7900 XT, Ryzen 7 5800X3D, 3440x1440, FSR 4 Native AA, one batch, replay workers off: 50.7 against 42.5 fps
standing and 56.0 against 45.9 along the field route; with FSR 3.1, 51.8 against 47.8 and 54.9 against 52.3. With
three replay workers, FSR 4, standing: 63.5 against 49.4. The screenshots matched those without it standing, along
the route and through warps to five areas, with no black frame outside the loading screens of both.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 17:41:47 -05:00
chrg6
26f3dc47ec Show the low-end GPU mode's settings under its switch in the Game tab, and read them only while the mode is on.
The settings had a tab of their own; they are rows of the Game tab now, listed under the switch once the mode is on after a restart, and the tab is gone. With the mode off every one of them reads as unset, whatever nx2navi.ini or the environment says, so nothing of the mode acts unless a player turned it on; the build reads guest_opt the same way. The notes describe that, and take the white edges in towns and the dropped textures from the known issues to the fixes.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 13:59:43 -05:00
chrg6
d2fbaba1c3 Put the low-end GPU mode in the settings menu's Game tab, marked experimental.
The row sets low_end_gpu, read at start, and says what the mode turns on and that it was measured on one card; its text is there in the menu's four languages. The key is decided again once the settings file is read.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 13:06:02 -05:00
chrg6
2324a74602 Turn the settings for older graphics cards on with one key, low_end_gpu = 1, and leave them off without it.
Mesh shaders as compute, the texture that gets memory of its own, staged mirror uploads and the shorter wait for the GPU, widened write-watch queries, the video memory limits and reserve, early upload batches, the asynchronous replay, the hot-pool rule and the recording thread on AMD cards without mesh shaders were measured on a Radeon RX 580 and run on no other card. Each keeps what 0.9.1 did unless the key or its own setting says otherwise; the key gives the defaults the way the device profile does. The notes describe them as that option, hold main's two new entries in one Changed section, and list the white edges in towns as a known issue.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 13:00:13 -05:00
chrg6
052c60dc0d Merge remote-tracking branch 'nx2navi/main' into release-0.9.2 2026-11-12 12:56:51 -05:00
epicmeme546
385734dcc0 Sharpen FSR 3.1 more below a render scale of three quarters: its own sharpening towards the maximum, and a second, lighter RCAS pass over its picture.
FSR 3.1 was soft at Performance and Ultra Performance, most of all in motion. On a village save, while the camera turned at a steady rate (present screenshots every 0.4 s, the mean absolute Laplacian of the scene's luminance): FSR 3.1 Native AA 6.7, FSR 4 Performance 5.9 and Ultra Performance 5.4, FSR 3.1 Performance 4.0 and Ultra Performance 3.3. The library's own input checks found nothing wrong, and its tuning constants (velocity factor, accumulation per frame, shading change scale, behind the test switch NX2NAVI_FFX_KEYS) gave nothing or took detail away. Its own sharpening at 100 instead of the default 80 gave 5.0 and 4.1.

Now the share of extra sharpening grows from none at three quarters of the output's width to all of it at half (vk_dlaa_fsr3_boost). FSR 3.1's own sharpness goes that share of the way to its maximum, and its picture gets a second RCAS pass (shaders/dlaa_sharpen.comp, AMD's FSR 1 header with the linear light taken through c / (1 + max c) and back), before the HUD is drawn. Both follow the sharpness slider; 0 turns them off, and NX2NAVI_FSR3_SHARPEN=0 leaves the second pass out. At RCAS's full strength the pass took Performance to 8.2, past Native AA, with grain on every surface, so it runs 1.5 stops weaker: Performance 5.7, Ultra Performance 4.7, Quality 5.2. 63.4 fps against 65.1 without the pass. The HDR picture is clean. FSR 4 is untouched.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:50:43 -05:00
epicmeme546
7581bb887d Let the free camera go anywhere, and make ground avoidance a switch that is off unless asked for.
The camera kept its height (only ZR and ZL changed it) and rose whenever the closest surface in the lower part of the view came within about three metres, so flying up to a character, a rock or a wall sent it upwards. It now moves where it looks and nothing stops it, the ground included.

Ground avoidance is a checkbox in the debug menu's free camera section. With it on, the nine view distances read back from the lower view become points of the scene (from the view's angles and the camera's pitch), and only a column whose lowest surface rises by less than about 30 degrees counts as ground: the camera goes no lower than a metre above it. Steeper things, objects and walls, are left alone. The read-back runs only while the switch is on.

Tested on a village save, 4 m/s forward for 5 s and then ZL for 4 s: with avoidance off the camera ended 17.4 m lower, through the floor; with it on it ended 0.7 m lower and held there. Flown at Link with the first version of the ground test, its height did not change.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:50:43 -05:00
chrg6
eccbc96873 Add the shadow bias fix to the 0.9.2 notes.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:40:43 -05:00
chrg6
5e006aec8a Make the release 0.9.2, with its notes.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:17:56 -05:00
epicmeme546
322d7c0933 Run DLSS or FSR where the game's own upscaler runs, and fill a jittered pass's edge rows as soon as it ends.
With the HUD hidden the screen showed the scene at its render size instead of the upscaler's picture. The upscaler ran at the pass after the game's own upscaler, taken for the pass the HUD is drawn into. Without a HUD the game draws no such pass: the next one is the frame's last, which encodes the stand-in's scaled scene into the 8-bit output. The upscaler's picture went into that target and the last draw drew over it. A player's save with the HUD off showed blocks of render pixels, a picture jumping by a render pixel between frames, and the undrawn edge row in white, at every FSR mode and at Native AA; every test save until now had the HUD on. vk_dlaa_upscaler now runs the upscaler right after the stand-in of the game's upscaler wrote its output image, and puts the picture there (NX2NAVI_DLAA_AT_UPSCALER=0: as before).

The edge fill moves to the end of each pass that took the jitter (vk_dlaa_pass_end), for the pass's colour targets and depth, in one copy of eight regions per image. Filled only before the upscaler, the undrawn row had already been read by the water, the bloom and the anti-aliasing pass.

On a copy of the player's save (HUD off), FSR 4 Ultra Performance, world slowed to 1/20, present screenshots 0.25 s apart: the picture moves 0.00 to 0.02 px between shots (old placement: a jump of one render pixel in 5 of 20), the change on edges is 1.9 against 16.9, and no shot has the white row (half had it, with HDR on). Native AA, Performance with HDR, and FSR 3.1 are steady and clean as well; the save with the HUD on is unchanged. A run through a stream: 0 of 106 shots with a bright bottom edge (20 of 102). Frame rate 58.3 fps against 58.6.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 11:14:16 -05:00
epicmeme546
2495391dd7 Fill the scene's outer rows and columns in every jittered frame, and take only turns of 30 degrees a frame for camera cuts.
A player's clip at Ultra Performance still showed the sky's colour in the last row of about half the frames. In those frames the fill, done only after a jitter to the left or up, had not run. The outermost row and column on each side of the light target and the depth are now filled from their neighbours whenever the frame was jittered, whatever the jitter's direction. A copied border pixel is nothing anyone sees.

A quick swing of the camera around Link turns it 11 to 18 degrees and moves it 0.9 to 1.4 m a frame. That was taken for a cut, and nine frames in a row started a new history, which showed the scene at its render size, blocky at the smaller modes. A cut now needs a move of 5 m or a turn of 30 degrees with a move.

Hyrule Field, FSR 4 Ultra Performance, present screenshots: standing still and on grass while running, the bottom edge matched the rows above it. Over water a bright bottom edge remains in a fifth of the moving shots, and none with the jitter off: the water reads the scene before the fill. The 0.9.2 notes list it as a known issue, with the frame rates and FSR's GPU times measured for the Ultra Performance question.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 10:22:00 -05:00
chrg6
ef3466ce4f Merge main into the 0.9.1 release: the launcher's Mods screen, the anti-aliasing choices beside FSR and DLSS, and the scene's last row and column filled before an upscaler reads it.
The 0.9.1 notes keep the release branch's text and take main's sections: New, the edge line under Fixed, and Changed.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 09:00:37 -05:00
chrg6
baad032500 Keep the fast link's waits at 3 ms a pipeline and 6 ms a frame.
The 8 ms and 16 ms tried in their place left fewer draws out in a scripted walk, but in play a frame that takes 10 to 14 ms longer felt worse to the player than one that is left out, in two sessions on the same install. The wait stays counted once for each pipeline, and a frame that has left a draw out already still waits for nothing more.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 08:49:26 -05:00
chrg6
b5aea4808b Say in the 0.9.1 notes which compute variants the preparation cannot read yet.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 08:37:34 -05:00
chrg6
8a61fcacaf Stop waiting for fast links in a frame that has already left a draw out.
Such a frame is held back or shown without that draw whatever its other pipelines do, and with hundreds of pipelines new at once every frame of an area's load spent its whole 16 ms budget on waits that could not complete it: 49 frames over 25 ms in a walk with no pipeline recorded, against 17 with the earlier 3 ms waits. With the rule the same walk has 15, the picture stands still 15 times instead of 50, and 1 frame is shown incomplete instead of 22.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 08:35:47 -05:00
chrg6
9f7c8ae810 Wait 8 ms once for a pipeline met for the first time, and carry the compute variants in the pipeline list.
A draw that met a new pipeline waited 3 ms for its fast link, in every frame, which is just under what the link takes with the stage libraries in the driver's cache: in a first-visit session on a new install 66 of 87 such draws gave up at the end of the wait and their frame was held back. The wait is now 8 ms for each pipeline, counted from its first miss and shared by all its draws, and 16 ms for a frame, so a pipeline the driver has to compile costs one frame the wait and the frames after it nothing.

The pipeline list tool also takes the compute variants a game folder dispatched, which no pipeline record names and which were translated in the middle of play, and reads a list made before as one of its inputs.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 08:25:42 -05:00
epicmeme546
37dc8a85b8 Move the Mods bullet from the 0.9.0 notes to the 0.9.1 draft.
0.9.0 is tagged at fbd4067 without the launcher's Mods screen, which came after it (89c453d), so its bullet goes under "New" in docs/releases/v0.9.1.md, unchanged. docs/releases/v0.9.0.md is back to how it was at the tag.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 08:25:25 -05:00
epicmeme546
2d09c220bf Fill the scene's last column or row from the one next to it after a jitter to the left or up, before DLSS or FSR reads the scene.
With FSR 4 or FSR 3.1 a light line flickered along the bottom and right edges of the picture. The jitter moves the scene's viewport by under half a pixel, which keeps every pixel centre inside it. Yet on an RX 7900 XT, a viewport moved up left the last row undrawn in every scene pass, and one moved left the last column. A frame dump showed the depth's last row at its clear value and the light target's last row holding the fog's colour, which the upscaler blended into the edge. NX2NAVI_DLAA_EDGE_FILL=0 turns the fill off for testing.

Hyrule Field, 3416x1440, present screenshots: the outermost rows averaged 40 against 20 just inside without the fill, and within 1 of the inside with it. The same held with FSR 4.1 Native AA and Quality, FSR 3.1, SMAA and HDR. Jitter off, and no upscaler, gave no line either.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 08:23:25 -05:00
epicmeme546
1c654ba0c1 Let the Anti-aliasing row's Game SMAA, Off, FXAA and SMAA run together with FSR 4, FSR 3.1 or DLSS, and show the anti-aliasing in the performance overlay.
Choosing one of them while a temporal upscaler was set turned the upscaler off, and the picture fell back to bilinear scaling. vk_aa.c no longer keeps the game's SMAA while DLSS or FSR runs. The chosen pass replaces the game's composition as without them: in the native modes after the upscaler, and in the scaling modes before it. In the menu, a choice leaves the upscaler and frame generation alone, and the row notes that the upscaler's TAA runs too. Picking DLSS or FSR under Upscaling keeps the Anti-aliasing choice. The TAA entry, listed while no temporal mode is set, now sets FSR 4 Native AA where FSR 4 runs instead of forcing FSR 3.1. The overlay gets an Anti-aliasing line under Upscaling, for example "TAA + SMAA (Ultra)".

Checked on an RX 7900 XT in Hyrule Field with FSR 4.1 Native AA and Quality, and with FSR 3.1. The log has "the game's SMAA replaced by" smaa, off and fxaa while FSR 4.1.2 upscales, and the pictures are right.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 08:23:25 -05:00
epicmeme546
89c453d7bb Add a Mods screen to the launcher and build the mods' code patches into the launcher's game.
Mods, on the home screen, opens the game's mods folder, adds a downloaded mod from its .zip, .7z or .rar file or its
folder, switches each mod on or off, and sets the load order (mods_disabled and mods_order in nx2navi.ini, written as
the game writes them). Each mod's description says what it changes, which other mod changes the same files and which
of the two wins, and why the game leaves it off when it does.

Before the game starts, Play puts the mods folder in order (launcher/mods.py prepare): an archive in it is unpacked into
a folder of its name and kept, a mod whose files sit a folder or more down has them moved up, and a romfs, exefs or
cheats folder put straight into the mods folder becomes a mod of its own. An archive that would write outside its
folder is refused, and nothing is deleted.

The launcher's build (tools/make_game.py) left the mods' code cheats and ExeFS patch files out, so those mods stayed
off. The lift now turns them into patch sets first, as the setup does, with the files in the lift's key and
build-cache/mod-code.json recording what it took up. Play builds the game again before it starts when an enabled mod
brings code no build has seen. The shaders' key names the lift and the compile without the mods' code, so such a build
compiles only what the patches change and leaves the shaders prepared. tools/mod_files.py is the one place the tools,
the build and the launcher find a mod's parts.

Tested: a zipped mod holding its own folder, put into a mods folder, was unpacked and moved up by the launcher's code,
and the game served its file in place of the game's. The lifter took a code cheat and a pchtxt patch made for the game's
main as patch sets. The launcher's and the setup's tests pass.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 08:11:57 -05:00
chrg6
d31c3a1036 Make the water corrections in the runtime, on by default, instead of loading replacement modules from a folder.
The coordinate pair and the absorption guard needed modules made on each PC by tools/projective_recipe.py and a folder named in NX2NAVI_SPV_OVERRIDE, so no player had them. runtime/spirv_water.c makes the recipe's edits on the translation in memory, in the recipe's order: on the NVIDIA profile its three modules are byte for byte the recipe's (RTX 5090, game 1.1.1). vk_pipeline.c keeps the edited modules in a small table, made at first use, and builds a pair from them only when both of its stages were made; a module of another shape is built as it is, with a log line. NX2NAVI_WATER_PROJECTIVE=0 turns the corrections off. tests/water_projective_check.py compares the runtime's edits with the recipe's on made-up modules.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 07:55:57 -05:00
chrg6
fc0202467c Make the release 0.9.1, with its notes.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 07:21:41 -05:00
chrg6
2f39b27fb6 Record the draw replay on three replay workers by default, and start the draft notes after 0.9.0.
replay_workers = 0 records everything on the submitting thread, as before.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 06:20:05 -05:00
chrg6
34cfb1a6e9 Say in the 0.9.0 notes that Kakariko's haze no longer drops out for a frame, and narrow the known flicker to shadows and lighting.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 05:43:33 -05:00
chrg6
e97c892742 Write the release notes of 0.9.0: the draft after 0.8.0 with every change since, the install steps, the known issues and the thanks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 05:32:09 -05:00