This takes back the three commits that added it (cd2f9f1, e60677e, a01910d): its runtime layer and Steam binding, the Co-op tab and what it drew over the game, the launcher's copy of Steam's library file, its settings, tests and docs. The tree is as it was before them, with the bug capture that came after kept: its note on screen no longer makes room for co-op's lines, and dbg_area, which the co-op had brought and the capture uses, stays.
The four settings of that co-op join the retired names, so a settings file that still has them logs no unknown key. A steam_api64.dll that the launcher put beside the game is left where it is: nothing loads it any more.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Vulkan has no quad or line-loop topology. Draws without indices were rewritten already; an indexed quad list went to the GPU with its indices under the triangle list topology, three at a time, joining corners of neighbouring quads, and an indexed loop lacked its closing line. Off by default and read at start; no log of Ocarina has shown such a draw so far, and the new line says when one comes. tests/index_rewrite_check.py checks the index lists.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A draw that finds every query slot still waiting for the completion thread goes uncounted, and the report after it said only what the other draws counted, at least 1: the game takes the object it tested for all but hidden for that frame. With the setting the report writes the larger of that and the last complete count reported into the same record. Off by default and read at start; the count of such reports is logged at the 1st, 10th, 100th and so on either way. tests/oq_hold_check.py checks the rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Through a nearest filter each of the game's shadow compares tests one texel, so shadow edges are stair steps of shadow map texels that crawl over the ground as the sun cascades follow the camera. The setting is off by default and read at start; with shadow_scale above 1 the samplers were already linear.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A thread samples every two seconds the video memory budget against this process's use (vk_mem_vram) and the system's
commit headroom and free physical memory (plat_commit_info, plat_mem_info), and turns each side into a level: roomy,
normal, tight or critical, with five points of hysteresis upward and a 256 MiB floor. Changes are logged, and the
memory report's system line ends with both levels. MEM_BUDGET_TEST_VRAM_MB and MEM_BUDGET_TEST_RAM_MB pretend a side
is that small, so that what gives memory back can be tried on a large machine; the texture cache's rules are unchanged.
tests/mem_budget_check.py checks the levels and the hysteresis.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The shader memory cache held 777 MiB of SPIR-V for 7115 shaders for the whole session. A background thread now
compresses the SPIR-V of each shader no reader pinned for shader_compress_idle_s seconds (zstd level 1, 26% of the
bytes on the test install's 44,151 modules) and frees the plain copy; readers pin it through gfx_shader_spirv_pin and
get it decoded back. What the drawing thread compares at pipeline misses and draws, the module's FNV-1a and its Binding
decorations, is kept with the shader, so module_binding_missing, the water corrections and the DLSS, crumbs and skip
lists decode nothing. A compute pipeline created at a dispatch and a mesh shader's first pipeline key still decode on
that thread, and the memory report counts those decodes apart, with the SPIR-V as held against uncompressed and the
shaders held compressed. shader_compress = 0 keeps it plain.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The character controller's three follow-surface modules kept only a tenth of the floor's velocity whenever the physics' inverse step passed 100, which every update above 100 fps did. The gate now compares with 100 over frames per update from the patch page above 60 fps, and with the game's 100 at 60 and 30 fps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every report adds a line for video memory outside VMA (the driver's usage and budget per heap against VMA's blocks, and counts of pipelines by kind and by last use, stage libraries, compute pipelines, layouts and descriptor pools, with the swapchain, DLSS and FSR sizes), a line that splits the process's commit by owner (the game's heap and maps, device-local memory, VMA's host blocks, the C runtime heap with the shader caches, pipeline tables, texture cache, log queue and flight recorder in it, the driver's pipeline cache data and the rest), and a line naming what grew by more than 64 MiB since the report before and since play began. Every ten minutes of play and at exit a ranking line orders the categories by growth and marks those that only climbed; tests/mem_growth_check.py checks that bookkeeping.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Link is carried by the Deku Tree's floating platform fully at 60 fps, about a tenth at 160 and not at all at 240,
which follows the solver steps an update (4, 2, 1 with physics_steps = 1) rather than those a second. The new set
osolverfull raises the rounded-up count to the 60 Hz frame's 4 in every update; physics_steps = 2 switches it on and
osolver off at start, and the mode is logged. 60 and 30 fps keep the game's 4 and 8. It costs more physics time above
60 fps: 576 solver steps a second at 144 fps and 960 at 240, against 288 and 240 with 1, the default, which stays
until a run confirms the carry. frame_step_check runs the lifted words of all three counts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Released textures go once they have gone unused for the hold, and what a switched-off upscaler or SMAA held is freed, with no setting to keep them. A vram_use line left in a settings file is known and read by nothing. Memory use is to be decided by the card's and the system's budget instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
F8 now always writes a folder under logs/captures: the area, Link's position and rotation, the camera of the frame on screen and the game's own, the presented frame as a PNG, frame times around the press, the machine, the settings that differ from the defaults, the end of the log, the save, and the game's flags and texts. A note on screen names the capture. The flight recorder's F8 dump goes into the capture's folder.
NX2NAVI_CAPTURE_REPLAY starts a run on a capture's settings, teleports to its area, walks Link to where he stood and puts the free camera where the camera was; tools/capture_run.py prepares the profile from the capture's save, runs it and compares the two captures. docs/bug-capture.md has the files and the steps.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The Steam co-op took the setting name of the old beta's switch, coop. A player whose nx2navi.ini still had coop = 1 from that beta got the new co-op switched on at the first start of the new build, unasked: the game signed in to Steam as its test app. The switch is now coop_steam (NX2NAVI_COOP_STEAM), off by default, and coop is a retired key like the old co-op's other settings: known, read by nothing.
--probe-cfg now loads a file of the old co-op and checks that its keys are no unknown keys, that coop = 1 leaves the new co-op off, and that coop_steam = 1 turns it on; it passes on a build of this commit. The game itself was not started with the change.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Co-op loads steam_api64.dll from beside ocarina.exe, and the repository may not hold that file. Before Play and before a start from the Steam shortcut, when the file is not there, launcher/steamlib.py now copies one: one a release ships in its bin folder if it has one, else the newest one in the games of the player's own Steam libraries that Valve signed (WinVerifyTrust and the signer's name) and that has every call runtime/steam.c uses. Nothing is downloaded, the search takes a second or two once, and with no Steam or no suitable file the game starts as before and the Co-op tab says what is missing. The tab's two texts about the file say so in the four languages.
Checked: four new tests on made-up library folders (too old, unsigned, too deep, a second library, a shipped file first, none said once) and the launcher's 190 tests pass; on this PC the search found 40 files in 1.2 s, 25 suitable, and copied a Valve-signed one; that file's library version, an older one than the game was run with, signs in as app 480 and makes a lobby in a program without the game. Not run: Play in the launcher itself with this change.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Up to four players, each in their own game and save, meet in a room. Rooms are Steam lobbies and the games talk through Steam's networking, so nobody forwards a port and nobody runs a server. The game signs in to Steam as its test app (480), so Steam shows the player as playing Spacewar. Off by default; the menu has a Co-op tab with Create a room, Join a room by its ID, Invite a friend, the players, chat and Leave, in English, Russian, Brazilian Portuguese and Simplified Chinese.
runtime/steam.c loads steam_api64.dll from beside the exe at run time and declares the C functions it calls itself; nothing of the Steamworks SDK is in the repository, and a player copies the file from a Steam game they have. runtime/coop.c is the room: the lobby's owner is the host, lets games of the same protocol and game build in and lists them, and every game takes positions, chat and progress only from the players on that list. runtime/coop_game.c reads Link from the Player actor and shares progress, items, songs and quest items through the game's own flag routines, each value only ever raised; small keys, rupees, ammunition and hearts stay each player's own, and the save is copied to coop-backup before anything of a room reaches it. The other players show as a name with a distance where their Link stands, projected with the upscaler's camera.
One Steam account cannot be in a lobby twice, and this PC has not the memory for two games, so the room and the game side were run with one game and tests/coop_peer.py as the second player over runtime/coop_local.c, a stand-in for Steam on 127.0.0.1 that only the environment turns on: the peer was let in, saw the game's Link in Hyrule Field, chat went both ways, the save was copied, one flag the save lacked was set and a flag the game does not share was refused. On Steam itself one game signed in as app 480, made a room, showed its ID and the player's Steam name on the Co-op tab and left. Not run: two Steam accounts in one room, an invite, a join by room ID over Steam, a host that leaves, a removal, and the menu's text probe on this build.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The physics' two water managers and the game's interactive floor simulation (the Deku Tree's ground webs) step their
surfaces in fixed steps of 1/60 s, as many whole steps as the frame's time holds, and drop the fraction, so every
frame shorter than 1/60 s ran none and the surfaces stood still above 60 fps. The new set owater (water_steps, on by
default) calls the page between the division and the game's cut, which keeps the fraction per object; at 60 fps the
count is the game's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After an update that keeps the prepared shaders, --warm-shaders built all 42,000 of them into the graphics driver's
cache again: 10 to 20 s at every update on a player's PC while the driver gave every one back at once, and the full
build when it no longer had them (380 s there once, after a change of what they are built with). It now builds twelve
fragment libraries spread over the list first, into the driver's cache alone, as the game's check at every start
does, and builds the whole list only when fewer than three quarters of them came from that cache.
On copies of an install's caches (RTX 5090): with the driver's cache partly cold after a relink, 5 of 12 came from it
and the whole list was built (313 s); the run after it found 12 of 12 and built nothing more, the step taking 3 s.
lib_warm = force builds the whole list whatever the sample says.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The hidden beta shared story progress through a relay a player had to run and never showed the other players. A new co-op replaces it. Gone are runtime/coop*.c and their headers, the menu's Co-op tab and its texts in four languages, tools/coop_relay.py, the co-op tests, docs/coop.md, the [coop] section of nx2navi.ini.example, the --probe-coop mode, the coop trace item, and Monocypher, which only this layer used.
The old settings stay known as retired keys, so an nx2navi.ini that still sets them logs no unknown key, and they stay on the list of private settings, so a bug report keeps a room's secret, a relay's address and a name out. The platform layer's UDP sockets and fs_save_snapshot stay for the new co-op; cfg_ini_now and fs_profile_path, which nothing else called, are removed.
Checked: the game builds and starts, the menu shows its four tabs, --probe-cfg and --probe-fs pass, and the launcher's private-settings test passes. tests/save_share_check.py builds without its co-op stub; it cannot run from this worktree because the folder's path is longer than Windows allows, on main too.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The patch set text_speed scales the typewriter speed of a message the game lets the player skip (fast, three times as
fast, its scripted waits as long) or runs the game's own skip on the first frame of each page (instant). Messages the
game marks unskippable, such as those that turn their page on a timer, keep the game's speed. The setting is live and
has a row on the Game tab in all four menu languages; with it at normal the set is off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Frame dumps show the upscaler reads the bloom composite's output, which the game has already exposed, bloomed and
tonemapped to 0..1. With dlss_prebloom = 1 it runs at the bloom chain's first pass on the scene's linear light. Without
upscaling its picture goes back into the light target. With upscaling the lens flares and the bloom composite are
drawn at the picture's size and that picture replaces the game's upscaler's output. Off by default; with it off
nothing changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The row writes scene_share = 1 with dlaa = 0, which the start already sized the render-target heap for; widescreen.c now
reads the share live, says when the heap needs a restart for it (the row's note and the Restart count), and logs the
scene size, the picture size and how the scene is scaled once the fixed share takes over and at each change. The
stand-in copies a scene of the picture's size texel for texel with a nearest sampler, and the performance overlay shows
Ocarina's real scene size instead of the other builds' placeholders. scene_share gets its settings row and its ini
text; the row's texts are in all four menu languages.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The rows keep their plain names. Their descriptions now say what the number counts and that 0 turns the setting
off: 0 to 4 for replay_pipe, 0 to 64 in steps of 4 for replay_small.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The rows are now CPU helper threads, Helpers work ahead, Helpers take small jobs and Start next frame early, each
with a short description of what it does and what it gained. Helpers work ahead and Helpers take small jobs are
switches: on writes replay_pipe = 4 and replay_small = 16, the values measured best, and another value set in
nx2navi.ini shows as on and stays.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Low, the default, lets released textures go after the hold and frees what switched-off upscalers and SMAA hold; High
keeps both for the session. The row shows Low for any setting but high, the old balanced among them. The descriptions
in all four languages no longer promise simpler surfaces or missing objects, since the default no longer trades them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Worker groups in flight (replay_pipe), Small groups to one worker (replay_small) and Early frame end (tail_early)
sit under Replay workers. A row whose setting does nothing without another one is greyed out and says which it needs.
The example settings file and the draft release notes name the rows, and the notes gain the replay_pipe and
replay_small entry.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Balanced, the default, is what the earlier commits made the default. High keeps what DLSS, frame generation's
HUD-less picture, FSR 1 and SMAA made after they are switched off, as before them. Low also sets, for the keys the
player leaves unset: released textures keep at most 1 GiB (tex_released_mb), textures give way from 70% of the video
memory budget (tex_vram_pressure) and the shared pipeline list is built at first draw (pipe_seed_boot = 0). Unsampled
live textures are not dropped in any of them: that eviction left the ground see-through for good. The values come
after the device profile and the low-end mode (cfg.c VRAMLOW); the row is in the Screen tab under Texture detail and
takes effect after a restart. The architecture notes describe the new memory report lines.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The cache kept the first eight sizes and formats for the whole run and refused every other one, so after a few
window, resolution or DLSS mode changes the stand-in's blit of a new size was left out, while the old sizes' images
stayed. A new size now takes a free entry or the one used longest ago, whose image goes through the deferred
destruction after the tonemap pass drops its views of it (vk_tonemap_forget), before another image can take its
handle. tests/scratch_lru_check.py checks the choice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The stance site called page +0xf50, which the 0.10.0 line gives the water ripples above 60 fps: the second
registration ends every 1.1.1 start with "registered twice", the sprint button off included. It calls +0xf30 now, and
the comments say which slots the other sets hold. The set's switch is NX2NAVI_SPRINT_BUTTON_PATCH, not a name another
open request uses for a set of its own.
The stand-still timings count 60 Hz frames (frame_step_frames), so a toggled sprint no longer ends on a short stop at
high frame rates. A press is decided at its start for its whole length: kept from the game and the sprint's when it
begins in gameplay (B: while Link moves), else the game's alone, so a held B is not handed to the game half way and a
B that closes the pause menu starts no sprint. A sprint switched off with the button setting does not come back by
itself, Link's state is read only where the memory is readable, and the row, nx2navi.ini.example and the controls
page say that B is the jump under the game's Swap Jump Controls and name the button without assuming the layout.
tests\sprint_check.py covers the press latch, the menu press, 240 fps and the switch-off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The two sites that count a movie's event frames from the shown picture's timestamp were part of the real-time step's
set, so the only way back to the old count also turned the step off. They are set omovie now, NX2NAVI_MOVIE_PTS
(movie_pts in nx2navi.ini), on by default.
The comment says what the new count changes at the default movie cap: nothing while the decoder keeps up; in a stall
the cues wait with the picture instead of going on with the soundtrack, and step by 2 or more when a picture is
dropped. The counter's reader, main+0x3b3ec10, hands it out as a float frame through a virtual call; its callers were
not traced, so whether a cue on a dropped picture's tick can be missed is said to be unknown, which is what the
switch is for.
The movie cap's comment keeps the measurements it rests on, the narration 2.4 times early and the fade at 65 s of 154
at 144 fps, with one sentence on the new sites. The new test is described in prose with what it does not cover,
instead of a row in the lifter's table.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A part left by a download of other bytes under the same name was resumed, and the result failed its sha256 check
as if the download were damaged. A note beside the part now names the file it belongs to by the expected sha256;
a part of another file is deleted with a log line and the download starts over, and the same file is still resumed
from another server.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A file called after a device, ending in a dot or a space, or holding a colon was unpacked into the device, under
another name or as a hidden stream, and the game missed it without a word. On Windows the archive is now refused
with the file's name and the reason; elsewhere such names pass as before.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Windows and the build tools stop at 260 characters for a file's whole path, and a built game needs up to 128 below
its folder. A deeper folder made the build stop in the middle with a file "not found"; Begin Installation and the
install job now refuse it first and name both lengths.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The window asked whether the game runs before the player picked the save, so the game could start during the dialog
or during the backup's copy and mount a save that was half replaced. The import now takes profile/instance.lock as
the game does: a running game refuses it, and a game started in the middle is turned away by its own lock.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A disk that filled in the middle ended a download after four tries with an error that named no cause, and an unpack
with half a folder. The rest of a download, the build tools with their unpacked size, an update's archive and a
mod's zip are now measured against the free space first, and the refusal says how much is needed and how much is
free; a disk that fills during a download is named as full at once.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The window's close ends the process under the detached threads, so a dump file the flight recorder's thread was
writing stayed cut short under its own name. Its three files are now written as .part and renamed when complete
(runtime/part_file.h, with a check that kills a writer in the middle), and the allocator's map goes through
plat_file_write_cached. The shader identities and the other cache files already went through an atomic write.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A job that writes into the game folder leaves data/job-running.json while it runs and removes it when it ends. A
launcher closed or killed in the middle leaves it, and the next start logs it and tells the player which job did not
finish and that Rebuild the Game or Begin Installation goes on from the steps that were done.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>