Ocarina streams its textures by detail level: while the player moves it registers about 32 pool slots with their next level every four or five frames. A pool refresh made 16 of them and wrote the stand-in into the set for the rest until its next round; the set is read as it is when its submission goes to the queue, so an object whose slot was among the rest could be drawn grey for a frame. A player's recording shows 1,525 such slots in 600 frames, each with its texture made later in the same frame. A slot whose entry in the set is a texture's view when it is looked up now has its texture made by that lookup, beside the count budget and the frame's creation time, 64 of them a present; pool_shown_first = 0 leaves them to the budget. The flight recorder also notes a slot that still had no picture when its submission ended.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game's line width was dropped at the call and every line drawn 1 pixel wide; the game draws two lines a frame at 4.5 pixels into a 144x144 mask. The width is now recorded with the draw state and set as dynamic state for draws of the line topology class, held to the device's range. Only pipelines of that class list the new dynamic state, so the others keep their entries in the pipeline caches and the driver's. line_width = 0 draws every line 1 pixel wide as before.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The 0.9.1 notes keep the release branch's text and take main's sections: New, the edge line under Fixed, and Changed.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The 8 ms and 16 ms tried in their place left fewer draws out in a scripted walk, but in play a frame that takes 10 to 14 ms longer felt worse to the player than one that is left out, in two sessions on the same install. The wait stays counted once for each pipeline, and a frame that has left a draw out already still waits for nothing more.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A draw that met a new pipeline waited 3 ms for its fast link, in every frame, which is just under what the link takes with the stage libraries in the driver's cache: in a first-visit session on a new install 66 of 87 such draws gave up at the end of the wait and their frame was held back. The wait is now 8 ms for each pipeline, counted from its first miss and shared by all its draws, and 16 ms for a frame, so a pipeline the driver has to compile costs one frame the wait and the frames after it nothing.
The pipeline list tool also takes the compute variants a game folder dispatched, which no pipeline record names and which were translated in the middle of play, and reads a list made before as one of its inputs.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With FSR 4 or FSR 3.1 a light line flickered along the bottom and right edges of the picture. The jitter moves the scene's viewport by under half a pixel, which keeps every pixel centre inside it. Yet on an RX 7900 XT, a viewport moved up left the last row undrawn in every scene pass, and one moved left the last column. A frame dump showed the depth's last row at its clear value and the light target's last row holding the fog's colour, which the upscaler blended into the edge. NX2NAVI_DLAA_EDGE_FILL=0 turns the fill off for testing.
Hyrule Field, 3416x1440, present screenshots: the outermost rows averaged 40 against 20 just inside without the fill, and within 1 of the inside with it. The same held with FSR 4.1 Native AA and Quality, FSR 3.1, SMAA and HDR. Jitter off, and no upscaler, gave no line either.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The coordinate pair and the absorption guard needed modules made on each PC by tools/projective_recipe.py and a folder named in NX2NAVI_SPV_OVERRIDE, so no player had them. runtime/spirv_water.c makes the recipe's edits on the translation in memory, in the recipe's order: on the NVIDIA profile its three modules are byte for byte the recipe's (RTX 5090, game 1.1.1). vk_pipeline.c keeps the edited modules in a small table, made at first use, and builds a pair from them only when both of its stages were made; a module of another shape is built as it is, with a log line. NX2NAVI_WATER_PROJECTIVE=0 turns the corrections off. tests/water_projective_check.py compares the runtime's edits with the recipe's on made-up modules.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
On an i9-14900KF (8 performance and 16 efficiency cores, 32 logical processors), with the replay on its own thread,
the core NX2NAVI_RECORDER_CORE=auto reserved (logical processors 14 and 15) left the woken replay thread unscheduled
for about 200 ms roughly once a second while the game stood in Kakariko. During each stall its queue held 40 to 50
items, its lock was free, the wakes had been sent and it used no CPU time, while a game thread waited on a fence of the
work in that queue: 27 frames a minute had a 150 ms or longer frame. With NX2NAVI_RECORDER_CORE=0 the same minute had
none. The default is now 0; auto and 1 still reserve the core, and the log says when none is reserved.
vk_dlaa_fg_inputs handed frame generation a reset of 0 every frame, so it was never told of a new history: across an
area load, another scene size or another target it generated frames between two unrelated pictures. It now gets the
reset DLSS ran with on the same frame.
DLSS itself started a new history only for a lost camera, another scene size or another target, not when the camera
jumped. cam_cut takes a move over 5 m, or a turn over 10 degrees together with a move over 0.5 m, per 60 Hz frame
(scaled by the time since the last camera) for a cut, from camera traces of play in the Fire Temple: a median of
0.05 m and 0.08 degrees a frame, area loads of 5 to 180 m in one frame. NX2NAVI_DLAA_CUT=0 turns it off, and each cut
is logged, up to 24.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On an RX 7900 XT with a Ryzen 7 5800X3D, Hyrule Field standing went from 41.2 to 50.4 fps in one batch, and the
pictures matched those with the workers off there and in Kokiri Forest, Kakariko, Goron City, a graveyard house and
Gerudo Valley. replay_workers = 0 in nx2navi.ini turns them off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new install met every pipeline in play: in Hyrule Field one 600-frame stretch of a first visit had 1,769 draws wait 461 ms in all for pipelines, the longest frame 88 ms. The boot now reads seed-pipeline-keys.bin, the release's list, as recorded pipelines after the install's own (keys_open_seed, NX2NAVI_PIPE_SEED, default 1): their pairs go into the vertex output unions and the prewarm builds them as it builds the install's. The preparation builds every listed pipeline (NX2NAVI_PREPARE_PIPELINES now defaults to all), with the unions of the same list, so the first boot of a new install finds them in the caches. The list's mesh pipelines are left out at the boot on a GPU without mesh shaders, as the preparation leaves them out. Nothing of the list goes into pipeline-keys.bin.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game finalizes texture objects on its own thread ahead of the replay, which still draws the frame the game recorded
before that; on the console the memory still holds the texels those draws read. Kakariko moves about 30 of its
textures to new addresses every four or five frames, and each move finalized the old descriptors. The replay's draws
of the frame before then met finalized CPU-written slots, and the stale rule gave them the stand-in even when their
own entry was still there with its content. The village's haze dropped out of a frame a few times a minute, and the
haze sprites that met a stand-in left hard-edged clear patches. A play session in Kakariko logged up to 4,805 stand-in
lookups in 60 frames, 1,826 in the 60 frames around one haze dropout, and 612 in the 60 frames after a run of
patched frames.
Such a slot now resolves to its own entry while that entry was uploaded or drawn by the GPU, and was neither superseded
by another descriptor at its address nor overwritten. The lookup samples the image as it is: it neither takes the
entry back nor reads its storage, so freed storage is still never read (the access violation the stale rule was made
for). NX2NAVI_TEX_STALE_KEPT=0 gives the stand-in again. The perf log's finalize line counts these lookups.
In a replay of a recorded Kakariko walk, most 60-frame windows went from stand-ins to the kept image (up to 328 a
window, stand-ins 0). In play, stand-ins remain in short bursts where the entry was already gone (up to about 2,000 in
60 frames, against the kept image in most windows). The tester still sees flicker that the 640x360 frame recorder
does not catch; that is not settled by this.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Once the released entries pass RELEASED_MAX, the sweep dropped an entry that comes back intact as soon as its 120
presents were up. Kakariko releases the ASTC textures of its hazy air and takes them back every few hundred frames, so
about 30 of them went each time, and the frame that needed one again sampled its stand-in while it was made and
uploaded anew. Such an entry now waits out GAP_TIMES the longest it stayed released before a take-back, as an entry
whose content lives only in its image does. NX2NAVI_TEX_KEEP_TAKEN=0 goes back to the old rule, and
NX2NAVI_TEX_RELEASED_MAX (a test) lowers the count from which the sweep starts, so a short run reaches it.
The haze still dropped out with this alone: most of those frames came from finalized slots, which the next commit
deals with.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The watch's thread takes the kernel lock every two seconds to look at every guest thread; a release does not need it running, and wait_watch_s = 10 turns it on again for a hang report.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hyrule Field, standing, 3 workers: with 1, 2 or 4 groups out the frame rate stayed within one frame per second of
the 50 the mode without pipelining makes, over three batches, though the replay is shorter. A frame there is the
replay and then about 6.6 ms of GPU work after it, which the next frame waits for; the design comment in vk_exec.c
now says so. Sending a part's finished command buffers while later groups record was tried and gained nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With NX2NAVI_REPLAY_PIPE=1 (off by default) the submitting thread hands a group's chunks to the workers, takes chunks
of it itself until none is left to take, and goes on with the ops after the group in a new command buffer after the
chunks' places in the part (vk_sync_append_later), also into the next group's front pass.
Up to four groups are handed out and not in their part yet; their chunks wait in one queue in the order of the stream.
The submitting thread waits for them only where the order needs it: for room, before a part goes to the GPU, before
copies and texture or buffer clears, where DLAA's run or the contact shadows' hook acts, and where a lookup would make
a texture entry or take back a retired one (the op goes again afterwards, as a chunk's does in turn).
What the chunks read stays as the stream had it while the submitting thread runs ahead: uniform snapshot drops count
from their place in the stream, a chunk reads only the inline uniform updates before its group, the HDR present's
source goes by stream position, the texture pool set syncs under the chunks' lock, each group keeps its own render
conditions, occlusion segments and closed query slots, and the queries after a group's last report go into the next
segment made after it. A group's first chunk runs its pass hooks after the group before began its pass; turns wait
for every earlier chunk, of earlier groups too. Locks the chunks take, the submitting thread takes while it is behind.
Draws keep the sampled-texture descriptors they resolved per draw context and reuse them without the texture lock
while their slot is unchanged; the workers waited for that lock at nearly every draw. Texture lookups that change
nothing no longer wait for their turn. The perf line says where the submitting thread waited, what the chunks took,
and which texture lookups waited; NX2NAVI_GPU_TIMELINE also shows the chunks and the waits.
Off by default because it does not pay yet: in Hyrule Field with 3 workers it shortens the replay (11.5 against 12.1
ms a frame) but not the frame (49.2 against 49.6 fps in the same batch). The GPU gets a group's commands only once its
last chunk is recorded, so the main thread's wait for the GPU after the frame's first submission grew by 0.8 ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NX2NAVI_VRAM_BUDGET_MB changes only the number the decisions compare with. The ballast takes that much device-local
memory right after the allocator is made, in dedicated buffers of 256 MiB, and holds it until the allocator goes, so the
driver's own behaviour at its limit (slow allocations, memory moved to system RAM, refusals) shows as on an 8 GB card.
Checked on an RTX 5090: 24000 of 24000 MiB taken and held; through eight reloads of Kakariko the use went past the card
(32,218 MiB at the end) and Kakariko fell from 118-151 fps in the first four rounds to 10-24 fps in the last four. Texture
detail was still chosen as full: the choice reads the driver's budget, which the ballast does not lower.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Maxwell samples a texture by its own descriptor, so a 2D texture under a 3D sample gives its texel at (u, v). Vulkan
has no 3D view of a 2D image, and get_view found no view for such a binding: the draw sampled a stand-in. Such a
texture (plain colour, one sample, up to 1024 x 1024 texels) now gets a 3D image of one slice with all of its levels,
made in the upload batch and copied again when the texture was uploaded or drawn into since, or another layer is
asked for (vk_texture.c vk_texture_flat3d_locked). NX2NAVI_TEX_FLAT3D=0 gives the stand-in as before.
Seen in Kakariko: two of the game's 4 x 4 RGBA8 textures are sampled as 3D textures, and each got its copy; the runs
through eight reloads at 60 and 144 fps ended without errors.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The chunks of a parallel group took query slots from the ring as they recorded, so the slots of the group's chunks
interleaved. The completion thread reads and resets slots in runs that follow the ring, and with interleaved slots it
made four times the result calls and a reset per slot: the wait after a frame's first submission ended 3.5 ms after
the GPU had run it instead of 0.6 ms, and the replay time the workers saved went into that wait (44 fps with 3 workers
as without). The front pass now gives each chunk a block of slots, as many as its draws that count samples and render,
in the order of the stream; a segment's slots are taken in ring order. Standing in Hyrule Field, 3 workers: 49.8 fps
against 43.7 with the workers off.
NX2NAVI_GPU_TIMELINE=<frame> writes four frames from that present on to the log: each replay, each timed part's submit
and GPU run, the waits for the GPU and the workers' groups, so a run shows whether the GPU waits for the replay, a wait,
or the CPU behind one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Stage 1 of recording a submission on several threads. A submission's draws come in runs between ops that have to
stay in the replay's order on its own thread (dispatches, copies, texture and buffer clears, events, the game's
barriers, calls). With NX2NAVI_REPLAY_WORKERS=1 a run of 16 draws or more is recorded by a worker thread: it takes a
copy of the replay state, records the run into a command buffer of its own pool with a draw context of its own, ends
it behind a full barrier and hands the state back. vk_sync_append puts that command buffer into the part between the
replay's own pieces before and after it, so the GPU runs everything in the op stream's order. The submitting thread
waits for each run, so every side effect keeps the replay's order; this stage checks that a run recorded apart from
a copy of the state gives the same pictures. The default, 0, replays as before.
walk's handling of the ops that do not steer it moves into op_one, which the worker uses too. NX2NAVI_REPLAY_RUNS=1
logs every 600 frames how the draws fall into such runs and which ops break them. The draw replay's hot functions load
their recording context once instead of at every use.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The BC3 encoder's colour half is a four-colour BC1 block (c0 above c1, or every index 0 when they are equal), so a BC1 image of an opaque texture decodes to exactly the texels the BC3 one did. The encoder writes that half alone with its specialization constant BC1 set; its push constants are as before, so the BC3 pipeline is unchanged.
Every ASTC texture the CPU provides is made BC3, and its first upload checks its blocks while it copies them into staging: when all decode with alpha 255 (tex_astc.c astc_blocks_opaque, from the block header for all but the endpoint modes with alpha, which are decoded), the entry gets a BC1 image in place of the BC3 one before the decode. Later uploads into a BC1 image check again and go back to BC3 for content with alpha. A large texture's copy and check run on the ASTC decode workers, so its first upload copies faster than before. A check of its own where the texture is made cost 1.7 s of the render thread over a seven-minute teleport tour.
On that tour (Kakariko Village, the Graveyard, Death Mountain Trail, Kokiri Forest, Hyrule Field, RX 7900 XT), against BC3 alone in the same batch: the ASTC textures in Hyrule Field at the end 2,568 instead of 3,104 MiB, video memory at its peak 11,814 instead of 12,374 MiB, process commit at its peak 25,539 instead of 26,139 MiB; the first 7,200 frames in 93.7 instead of 101.3 s and the run's slowest 1 % at 24.1 instead of 21.1 fps. --probe-astc checks the header test against a decode of every generated block, the loop, its copy and the worker pool against it, and each BC1 block against the colour half of its BC3 block. NX2NAVI_ASTC_BC1=0 (astc_bc1 = 0) keeps every ASTC texture BC3; the sampling probe NX2NAVI_ASTC_BC_PROBE it replaces is gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Where the lazy write-back is off (AMD's driver, outside Windows), what a binding written by a shader or a copy holds goes
back to guest memory at the end of every submission. With NX2NAVI_WB_SKIP_MB=n a written range of n MiB or more goes
back for its first 64 KiB, which carries the few words the CPU reads at the start of such buffers, and the rest stays
in the mirror, whose pool is then never evicted. A CPU read further in would see older bytes, and a CPU write further
in would have the next sync copy that page's older guest bytes over the GPU's, so it is a test switch, default 0.
Measured with NX2NAVI_WB_LAZY=0 on an RTX 5090, 75 s runs with warm caches, off against NX2NAVI_WB_SKIP_MB=1:
Kakariko walk GPU median 6.60 against 4.20 ms a frame, 98 against 132 fps; Hyrule Field walk GPU 10.09 against
4.88 ms, 76 against 132 fps, 1% low 61 against 98 fps. 78 to 94 MiB a frame stayed in the mirrors. The last frames
of both runs in each area show the same picture, and the logs have no errors.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The prologue of a part copies the pages the CPU wrote since a mirror's last sync from guest memory into the mirror when
the GPU runs it, a frame or more after the game's submit when the GPU is behind: the GPU then reads what the game
wrote there meanwhile, values meant for a later frame. With NX2NAVI_MIRROR_CAPTURE_KB=n the CPU copies up to n KiB of
those pages per part into a host buffer of the submission when the part is handed over, and the prologue copies them
from there. A pool keeps the GPU-time copy while a write-back of its mirror into guest memory is still on the GPU (its
fence, now kept per pool), when it has a twin (the device address table's writes reach guest memory unrecorded), and
for a range with a page that cannot be read without a fault (memory.c mem_copy_readable, under the freeze lock, so a
lazily armed range stays with the GPU). With the default of every mirror twinned (NX2NAVI_GPA_TWIN_MAX_KB=0) it
copies nothing; it is a test switch for the replay's late reads, default 0.
Measured on an RTX 5090 with NX2NAVI_GPA_TWIN_MAX_KB=64 (mirrors of pools over 64 KiB without a twin), 75 s runs
with warm caches, NX2NAVI_MIRROR_CAPTURE_KB 0 against 8192: Kakariko 0.95 MiB a frame copied in 149 ranges for
0.21 ms of the replay thread, 116.7 against 118.4 fps (interval median 6.26 against 6.46 ms); Hyrule Field walk
1.38 MiB in 224 ranges, 0.37 ms, 110.2 against 107.2 fps, 1% low 83.3 against 78.1. 0.08 MiB a frame stayed with the
GPU-time copy. A first version that took the freeze lock and asked the system for each range's pages cost 2.9 to 4.3
ms a frame. A Kakariko run with NX2NAVI_REPLAY_ASYNC=1 and the copy on played through without errors.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A staging buffer, a transient buffer of the replay or a descriptor pool that the driver refuses for memory used to end
the game at once. Now the buffers kept for reuse go back to the driver first: the staging cache, the staging arena's
free chunks, the write-back snapshot pool and the headroom's spare blocks (no new spare block for 30 s after that), and
the allocation is tried once more; only a second refusal ends the game. On integrated GPUs the device-local heap is the
machine's RAM and fills before the commit checks see anything: staging buffers of 11 KiB to 16 MiB refused there ended
the game in Hyrule Field and on the first scene of play (#465, #567).
NX2NAVI_STAGING_FAIL_AT=n (diagnostics) takes the n-th staging buffer as refused once, to test the path.
Check: a Kakariko run with NX2NAVI_STAGING_FAIL_AT=300 logged "staging buffer of 524288 bytes refused (-2): 348.2 MiB of kept buffers and spare
blocks given back, made at the second try" and played on to the end of its script. The transient buffer and descriptor
pool paths call the same give-back and were not forced.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A place's task and mesh programs all arrive in its first frames, and each one's draws are left out until its compute
pipelines are built, so with one thread the foliage of a first visit filled in one program at a time.
NX2NAVI_MESH_FALLBACK_WORKERS (auto: one thread for each 4 logical processors, 1 to 4) sets how many threads make
them, and the log says how long the queue took to empty the first time.
Measured with the fallback forced on, no pipeline cache and new exe names (cold driver cache), the adult save's
first 75 s: with 1 worker the first 5 programs were ready after 420 ms, 3,266 draws were skipped while a pipeline or
program was pending, 1% low 16.1 fps and 145 frames over 50 ms; with 4 workers 256 ms, 956 draws, 55.7 fps and 35.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
AMD's Windows driver answers VK_ERROR_UNKNOWN for some pipelines its compiler gives up on, and the draws that need
such a pipeline were left out for good. create_graphics now tries once more with VK_PIPELINE_CREATE_DISABLE_OPTIMIZATION_BIT
(slower shaders for that pipeline instead of a missing draw) and logs the first such retry. NX2NAVI_VK_NOOPT gains a
value, mesh: only pipelines with task and mesh stages, the foliage's, are built without the optimiser, whose
optimisation is a suspect in device losses some minutes into a forest on AMD GPUs; with it a report can be narrowed
without slowing every pipeline.
Checked: the runtime compiles. A 60 s run with VK_NOOPT=mesh on an RTX GPU logs the mesh-only line, has no error and
the same GPU time as the default (4.09 ms a frame against 4.09), 134.5 fps. The retry cannot be triggered on this
GPU.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A game that stops with nothing in its log leaves no clue to which threads wait for which. A thread of its own now
looks every 2 s for guest threads blocked that long on a lock (ArbitrateLock) or on another thread's end
(WaitSynchronization on a thread handle) and logs each such wait once: the waiter, the lock's holder or the thread
waited for, and whether that one is itself waiting and on what. Waits on condition variables, events and addresses
are left out, since idle worker threads wait on them for good. At most 24 lines a run. NX2NAVI_WAIT_WATCH_S sets the
threshold (10; 0 off). The wait's start is now kept for every blocking wait, not only under the sched trace.
Checked: the runtime compiles and tests/sync_wake_check.py passes. A 90 s run with WAIT_WATCH_S=1 logged one chain
during an area load ("thread 0x102d has waited 3 s for the lock ... held by thread 0x105a, itself waiting 2.6 s"),
and nothing in steady play; with the default of 10 s, earlier runs log nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game asks for 1x or 2x on its ground, road and wall textures, so they blur a few metres off at the shallow angles
a third-person camera sees them at. aniso now defaults to 16 (the menu's Texture filtering row and the ini still offer
game, 2, 4, 8 and 16); as before it raises only filtered, mipmapped textures that tile, and shadow maps, data maps and
screen-sized buffers keep the game's setting. A player's saved choice is kept.
Measured: two 60 s runs of an adult save on an RTX GPU at 2560x1440 without DLSS, one with aniso = game and one with
16: the GPU time a frame went from 3.92 to 4.06 ms (+0.14 ms), the frame rate stayed CPU-bound (142.7 and 148.3 fps
mean, within the runs' spread).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ocarina anti-aliases every frame with its own SMAA in three compute passes after the bloom composite. The new aa
setting (nx2navi.ini aa, the Screen tab's Anti-aliasing row) keeps that by default. off, fxaa and smaa leave out the
game's edge and weight passes and replace its composition with a pass of our own that writes the same square-rooted
RGB9E5 words into the scene target: a plain copy, an edge smoothing written here, or the SMAA reference implementation
with its area and search textures (MIT). taa is DLSS or FSR 3.1 at the scene's size, which the row sets through the
upscaler; while either runs, the game's SMAA stays whatever aa says. The game's passes are known by a hash of their
guest code. The shader build now also rebuilds a header when a file its source includes changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game's movie player adds the time manager's step to an accumulator at each update and advances the movie by whole
pictures of it, at most the player's limit per update, which is one for the Triforce movie. While a movie plays the
game is held at 60 updates a second, but every late frame cost an update, the pacer started its slots again from the
late one, and the steady step's payback of the lost time came as steps over one frame, which the player cannot turn
into more than one picture. So each late frame put the picture further behind the sound, which plays by the clock, and
it never caught up.
While a movie plays the step is now exactly one movie frame, and the pacer keeps the movie's slots through a lateness
of up to a second, presenting the frames after a late one at once until the game is back on them. The updates then
average the movie's rate, and the picture, the event's update count and the game's clock all stay with the sound.
movie_clock = 0 gives the earlier behaviour. The movie log now measures the picture on screen against real time where
the game releases it (the game fetches pictures ahead into a list of its own) and reports it at the end of each movie.
test_hitch = <every>:<ms> makes a frame that much late every so many presents, for test runs.
Measured on the Triforce movie (event Dm_Kokiri_0095, 7,040 pictures, 117 s), one exe with movie_clock = 0 against 1,
and a 70 ms late frame every two seconds (test_hitch = 120:70), as a run with natural hitches had shown a drift of 40 ms
every ten seconds. Drift of the picture on screen behind real time, from the movie's first 10 s to its end:
fps_limit before (updates/s, drift at the end) after (updates/s, drift over the movie)
unlimited 58.86, 2,187 ms behind 60.22, flat at 53 to 55 ms
144 58.86, 2,196 ms behind 60.04, flat at -11 to -15 ms
120 58.98, 2,257 ms behind 60.20, flat at -1 to 0 ms
60 58.88, 2,220 ms behind 59.98, flat at -21 to -22 ms
Without the late frames both kept time (unlimited: before flat at 21 ms, after flat at -13 ms). The selftest,
--probe-cfg, --probe-kernel, --probe-movie and tests/frame_step_check.py pass; the check now plays a movie started at
240 fps with late and short frames and needs exactly one frame every update.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The HDR row lists Off, RenoDX (the game's picture tone mapped to the display, the one fixed look) and Native (the game's own HDR, taken up at the next start), with the peak, game and HUD whites under either.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HDR on is the game's scene through the observer-response mapper, anchored to the game's own mid grey and tone slope, with half of the hue bend of the game's clamp: the defaults the menu had. The tone mapper choice, the mid grey, the tone slope and its match, the hue clip, exposure, highlights, shadows, contrast, saturation, highlight saturation, blowout, flare, hue, grade and gamma are gone from the menu, the settings table and the example ini; a file that still sets them works as before, the keys read by nothing and logging nothing. The menu's HDR row is Off and On, with the peak, game and HUD whites under it. The game's own HDR is still there for a file that sets hdr = native, and the row lists it only then. The luminance mapper and its grading code, which no setting reaches any more, are removed from the tonemap library, and the support buffer carries one vec4 for it.
The dark tones of a dark scene sat far above black: the present showed the game's sRGB-encoded picture as that encode decodes, linear near black, while the game is graded for a display of gamma about 2.2, and since the observer-response mapper became the default the 2.2 correction ran with the luminance mapper only. A scene value of 0.003 came out at 0.29 nits at a white of 350 nits, where a 2.2 display shows the game at 0.015. The present now always shows the picture as a 2.2 display would, and the tonemap aims its peak lower by that correction's inverse, so the brightest light still reaches the display's peak; the same value comes out at 0.017 nits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
No menu row sets coop_beta; it lives in nx2navi.ini under [coop] (NX2NAVI_COOP_BETA) and takes effect at once. Co-op
itself is unchanged: coop = 1 still runs a session with or without the tab. The notes and the co-op guide say how to
show the tab.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
That wait ends when the GPU has run the submission's own commands (wb_split = 1). The completion thread was then still
at the last frame's submissions, so the occlusion counts, counter reports and event values the game reads next reached
its memory after it had gone on. A player's capture in Hyrule Field shows the result: trees, ground and walls lose
their direct light for single frames about every 36 frames, 57 of 1,800 frames, and with the fence's wait
(wb_split = 0) the same place showed none.
The fence's wait also covers the rest of what the completion thread does for those submissions, 0.23 to 0.40 ms a
frame of page stamps the game does not read. So those results now have a queue of their own
(vk_completion_add_result), and the waiter runs the ones due for its submission and the ones before it as soon as
the GPU's signal is there; the completion thread runs them the same way, ahead of its other callbacks, one runner at
a time and in the order they were queued. wb_split = 3 is the bare wait as it was, to measure against.
Checked: it builds, the launcher tests and the address table check pass, and the player's hand test of this wait at
that place showed no such frame. Not measured: no scripted run of it was made (the one scripted run with the bare
wait in that field shows 1,170 occlusion counts a frame written late and no dark frame, so the script does not
reproduce the fault), and its cost against the bare wait is not known.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The author of the pull request it was ported from closed that request on 2026-11-11 with the words that they give no
permission to use its code. The history (NX2NAVI_VA_REPORT, runtime/vk_vaddr.c, the stack walk it used and its notes
in the docs and the example settings) goes; the lost device's report keeps the breadcrumbs, the pass marks, the video
memory and the driver's fault information.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Brought onto the line with FSR 4, its frame generation and the debug menu. Where both sides had added to the same
place, both stay: the patch table keeps the pickup count and the free camera, the settings list keeps both sides'
names, the menu includes the co-op page and the debug menu, and the launcher builder takes the pipeline list and the
FSR 4 folder. Both sides had added the menu's typed-character event; one definition stays, with the window code that
passes characters outside the basic plane.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With it on, the game draws from a camera of the menu's instead of its own, in play and in cutscenes. The left stick moves it along its view and sideways, the right stick turns it, ZR and ZL raise and lower it, R makes it faster and L slower, and Link stands meanwhile; or the camera stays where it is and the pad plays the game.
It works inside the game's own camera update: a new patch site sends the instruction at which the frame's position, target and up vector are final to a host function, which replaces them for the camera that follows Link and the one the events direct, so the game draws, culls and loads detail for what the free camera sees. The camera of the interface's 3D models and the one the sound follows stay the game's. The set is off unless the menu switches it on. A teleport's arrival starts the free camera again from the game's view.
Tested in Hyrule Field with scripted stick input (turn, rise, strafe, with Link's position unchanged), with the pad playing while the camera stays, across a teleport to Kakariko Village, during the Kakariko arrival cutscene, and switched on by a click in the menu.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A freeze (a VirtualQuery and a VirtualProtect of 2 MiB) takes microseconds as a rule, but in the second after an area
load each took 8 to 17 ms. The newly loaded regions all go idle together, so 32 came up in one submission: its mirror
begin took 70.5 ms and the frame 78 ms, and a 9 ms freeze followed in each of the next 20 frames. In a play session
363 regions were frozen in the second after Kakariko loaded and 70 to 120 a second for the next 20 seconds, with the
frames over 50 ms in the same windows. A pass now stops once it has spent NX2NAVI_FREEZE_BUDGET_US (default 1000;
0 as before), and a freeze over 2 ms holds the passes for 250 ms, doubled for each slow one in a row up to 2 s. On the
Kakariko route the time in slow memory calls after the load went from 1374 ms in 170 calls to 115 ms in 18, the 78 ms
frame is gone, and the regions freeze some three seconds later, once the calls are fast again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The finalize of a used pool flushed and waited for every upload batch and then for the idle queue. During an area load
the queue also holds the load's texture uploads, which name no pool's storage: entering Kokiri Forest, one finalize
waited 418 ms and the frame took 462 ms. The game finalizes a pool once its own work with it is done, so the finalize
now waits for the submissions issued so far and returns; the pool's buffer and memory go once the upload batches handed
out by then and the submission being recorded are through. NX2NAVI_POOL_FINI_IDLE=1 keeps the old wait.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With debug_menu = 1 (off by default; the Game tab has the switch) F9 opens a panel on the left edge in the
performance overlay's look, with the game in view beside it. ui/menu.cpp lays it out in the settings menu's place,
so its input and the game's blocked pad are the menu's own. Typed characters now reach the menu for its text fields.
Flags: the game's 11,292 on/off flags are read from its game data manager, and a click changes one through the
game's own function on the game's thread at its pad read (runtime/debug_tools.c dbg_tick), so the game applies it
at its next update as it does its own changes. The game knows a flag by the hash of its name only; the names shown
are found in the player's own event flow files, hashed and matched when the panel first opens (2,250 of them from
915 files in 0.2 s), and none is kept in the code. World: Link's position, and a speed factor from 0.05 to 8 that
multiplies the step the runtime gives the game each frame (measured 0.50 at 0.5x). Memory: a search of the heap
for a value of 1, 2 or 4 bytes or a float (about 2 s), narrowed by equals, changed, unchanged, went up or went
down, with a value to set at a place or to hold there every frame.
Tested through the window's own messages: F9 opened it, a click on a flag set that flag in the game, text typed
into the filter narrowed the list, and F9 closed it; a scripted run set and held a value and put it back.
Teleporting, a free camera and starting cutscenes are not in it: writing Link's position, or every copy of it in
the heap, moved him back within three frames, so they need the game's own warp, scene-change and event functions.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game draws its scene into one of a few pooled targets of the same size and moves to another whenever its pass list changes, while the camera and the scene carry on. vk_dlaa.c target_changed started a new history at every such change, so DLSS and FSR 3.1 began again from one jittered frame each time: a few soft, grainy frames with dots over the whole picture. The history is the upscaler's own and not in the target, so it now stays where the frame has valid motion vectors (the camera of this frame and of the last one); without them a new history starts as before. The log line of a change says which of the two happened, and the 300-frame line counts the changes with the history kept. NX2NAVI_DLAA_TARGET_KEEP=0 gives a new history at every change.
From pull request #538, whose author counted 35 resets in a walk of a minute through Kokiri Forest before and 1 after. Here it is compiled and the settings probe passes; it was not run in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A pipeline cache over the size limit was dropped at every start and, since the file is no longer written in play, never replaced: every start began empty. The play file is now folded in at the next start whatever its size when the file beside it is over the limit.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
auto turns the fallback on for a device without VK_EXT_mesh_shader, 1 for every device (testing), 0 never.
mesh_fallback_mb sizes the buffers the passes write. Nothing draws through it yet.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Two descriptors can name one CPU-written storage: one whose content the cache takes from the CPU, and a second with a texture flag for which it does not. The second has no upload of its own and its slot shows the first one's image while that entry is live. Once the first is released, a lookup of the second's slot makes it an entry of its own, start_at destroys the released first one, and the new image starts cleared and is never uploaded; the slot shows it from then on, also after the first descriptor is registered again. The same happens when both are released and the texture pool refresh looks the second's slot up before the next texture arrives in that memory.
With tex_split_fill = 1 (the default) start_at gives such an entry the storage's bytes: by a copy from the released CPU-written entry it is about to destroy when that image is current and alias_compatible allows, else by an upload from the storage. The image then follows the storage as a CPU-written texture's does until the GPU or WriteTexels writes it; 2 fills it once, 0 is the behaviour before. Depth, stencil and multisample images, pools without CPU access and storage over 32 MiB are left out, and an entry that is to be filled gets a new image instead of a released entry's, since a reused image goes through its first transition after the upload batch. The perf trace counts the copies, the fills with their bytes and time, the fills made again after a write and the entries left empty.
--probe-vkmem makes both sequences with the three values and reads the second descriptor's image back: zeros with 0, the storage's bytes with 1, and with 2 the bytes of the texture that was in the memory before when both descriptors were let go of. One case makes the entry inside a recorded submission, through a hook that lets the probe stand in for a replay, and there the content comes by the copy.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>