The game's shaders rely on IEEE NaN and infinity results: unordered comparisons compile to x > c || isnan(x), a
zero-length normalisation gives an infinity that a later test catches, integer masks travel through float selects,
and the translator's own NaN guards are isnan tests. Our SPIR-V never declared SignedZeroInfNanPreserve, which lets a
driver assume floats are never NaN or infinite. NVIDIA's driver keeps the IEEE results anyway; AMD's compilers do not
(issue #156: a NaN-bit select read as a signed integer gave 2^32; #41 and #110: black and white blocks on Navi and on
Link next to her). The player report: AMD GPUs draw Navi's sparkles but not her orb, whose light sits at her own
centre.
vk_pipeline.c spirv_nan_preserve now adds the capability, SPV_KHR_float_controls and the mode for 32-bit floats (16
and 64 where the module declares them and the driver can) to every game shader module. NX2NAVI_VK_NAN_PRESERVE: unset
on every driver except NVIDIA's own, 1 everywhere, 0 off. --selftest checks the rewrite; the rewritten modules of 600
translated game shaders pass spirv-val for Vulkan 1.3. Not yet seen on an AMD GPU.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
EnumProfiles walks RTSS's Profiles\*.cfg with _findfirst and _findnext and keeps the find handle in 32 bits. The handle
points into the process heap, which lies above 4 GB here because the guest address space takes the low part (memory.c
mem_init), so _findnext gets a cut pointer and faults in ntdll: the crash report then ends the game with code 71 before
the title screen (issue #231). rtss_limit.c profile_exists now looks for Profiles\<name>.cfg in RTSS's folder, which is
what EnumProfiles reports. NX2NAVI_RTSS_ENUM=1 calls EnumProfiles again, to test an RTSS that keeps the whole handle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The last-chance exception filter is set at the start, before the GPU driver and the other DLLs load. A DLL that sets
its own filter later takes its place, and a fault in that DLL then ends the game with no FATAL line in the log. Two
0.6.0 logs from an RX 7800 XT end that way on the title screen. Once a second the filter is now put back and the
module that replaced it is logged (NX2NAVI_CRASH_FILTER_GUARD, default 1). When the game ends with a nonzero code,
the launcher adds that code, in hex with its meaning, to the end of logs\nx2navi.log, so a fail-fast exit that no
handler in the process can see still shows in the log a player sends.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every shader cache key names the translator, so a release with a new translator had no cached translation at all:
the launcher re-translated about 42,000 programs before play, and play waited for any program not prepared.
The cache now lists the translator identities it holds translations of in shader-cache/identities.txt, newest first.
A shader the current translator has no translation of uses a previous one's, looked up with that identity mixed with
this machine's host options and read with the usual checks; it keeps that translation for the rest of the session, so
no pipeline is built twice. After the boot prewarm a background pass translates every stored input that has a previous
translator's entry again under the current one, on its own translator child at idle priority that waits while the
game translates. A program the new translator refuses keeps its old translation and is logged. Once the pass has gone
through every such input, the old entries of what it covered are dropped: loose files are deleted, and a pruned copy
of shader-cache.pack replaces the pack at the next start when the pack is still the one it was copied from.
--prepare-shaders still translates everything under the current translator. NX2NAVI_SHADER_CARRY=0 keeps the earlier
behaviour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Tested in the 0.6.1 test build (RTX 5090, Kokiri Forest), switching the frame rate changes off in turn: the foliage
flickered with split_idle on alone and not with it off, with render target image reuse on either way. split_idle sends
a submission's first part to the GPU at the first pass boundary after a draw or dispatch while the GPU is idle,
without the usual draw and time minimums; why parts cut that early make the foliage flicker is not known yet.
The settings file's two stacked descriptions of the split settings, left by the merge, are one again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
From the local fixes package (fix 11), measured in Kokiri Forest at 4K on an RTX 4090 over PCIe 3.0: 40.5 to 62.6 fps
native and 45.6 to 74.9 fps with DLSS Quality, the mirror copies from 6.5 to 0.3 ms of GPU time a frame.
- Pages a VRAM mirror wrote back into guest memory are not copied up into it again: the mirror sync reads page stamps
of their own that a mirror's write-back leaves alone (vk_gpu_written_back, decided at record time by
vk_mem_mirrored). This replaces the lookup table NX2NAVI_WB_NO_REUP had, keeps its name, and is now on by default.
- The game's flushes of mirrored memory are not copied where the write watch covers the region, as every page the game
wrote there is stamped already (47-57 MiB a frame); NX2NAVI_FLUSH_UPLOAD=1 copies them as before.
- Written storage ranges up to NX2NAVI_WB_MERGE_MAX (now 32 MiB) are merged in 4 MiB pieces, so a range is no longer
bound to what one dispatch covers; the snapshot pool keeps its budget-scaled size with 128 slots.
- A submission's first part goes to the GPU at the first pass boundary while the GPU is idle (split_idle), long passes
are split too (split_in_pass), and the part's time limit reads the clock less often.
- A render target that needs an image of its own takes the image of a released one with the same parameters, released
two or more frames before (tex_reuse); memory requirements are kept per parameter set; a released entry another
descriptor's entry replaced at its address is kept and taken back.
- The memory check reads a page's write-watch bit and stamp under the lock that keeps them together.
- The launcher reads the gamepad only while its own window is in front, and does not start a second copy of the game.
- make_game.py says why a Python package did not load, not only that it is missing.
The fix's per-pass GPU timing is left out: NX2NAVI_GPU_PASSES does the same in main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NX2NAVI_DUMP_FILE=<path>: every 8th present looks for that file; when it is there, the present deletes it and dumps the
next frame to dump/f<present>, or that many frames in a row when the file holds a number up to 8, so a script takes
dumps when it likes. Dumps list up to 1024 pipeline and texture sets per pass (was 48) and copy every layer of a
sampled 2D array texture. From the local fixes package (fix 8); its mesh draw and movie dump parts are in main
already, in the form main has.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The driver charges device memory to the commit, and idle live textures went only above NX2NAVI_TEX_VRAM_PRESSURE of
the device's budget: on a 16-32 GB card the textures of every area visited stayed until the commit ran out, in 27-37 GB
processes that then failed an allocation or lost the device (#177, #203, #215). While commit_is_low holds and the
released entries are down to their low-commit size, evict_idle now runs too, 256 MiB at a time
(NX2NAVI_TEX_COMMIT_EVICT=0 turns it off).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
It talks only to a Discord client running on the same PC and does nothing without one; discord_rpc = 0, the Game tab
of the settings menu or the launcher's Discord Status row turns it off. The launcher's row reads an empty or missing
value as on, as the game does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The presence is off by default and its only switch was a row of the settings menu's Menu tab, which the Ocarina menu
left out, so it could be turned on only by editing nx2navi.ini. The row is in the Game tab now, and the launcher's
Settings has a Discord Status row that writes discord_rpc to the game's nx2navi.ini (launcher/gameini.py, which
reads the file as runtime/cfg.c does and changes only the line it sets). The connection itself works: the installed
game's --probe-discord connects and sets the status.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With trace = perf, every 600 frames heap_log started a thread that walks the whole address space with VirtualQuery
(plat_mem_census) for the "mem: process" line. The walk takes 100-240 ms, and though it runs on its own thread it
holds the process's address-space lock, which the game's threads take at every page fault and VirtualAlloc: the
present after each walk arrived 65-120 ms late, a hitch every ten seconds in every run with the trace on, and the
runs people attach to issues carried it. The walk now runs only with mem_census = 1 (NX2NAVI_MEM_CENSUS); the rest of
the memory lines stay.
Kokiri Forest, trace = perf: before, "slow frame" lines at 601, 1201, 1801, 2401 and 3002 of 65-120 ms with nothing
of it in the pipeline, texture or fence columns; after, none at those frames.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The target history is now four-way set-associative and counts a target as recent when one of the last four frames
rendered it, so the scene passes, probe layers and alternating effect mips no longer read as never rendered and wait
for their pipelines one at a time when a new area is entered. NX2NAVI_ONESHOT_BUDGET=1 makes one-shot draws share a
wait budget per presented frame (100 ms for large passes, 300 ms for small ones) instead of waiting up to
ONESHOT_WAIT_MS each; it is off by default until play shows no target left empty that way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
runtime/input_ds3_win.c finds a DualShock 3 through hid.dll and setupapi (loaded at run time), sends it the command
that makes it report, sets its first player light and decodes its reports (runtime/input_ds3.c, tested by
tests/ds3_check) into the pad state, with rumble through its light motor. input.c follows whichever pad was pressed
last when an SDL pad is connected too. ds3 = 1 in nx2navi.ini turns it on: it starts a scan for the controller every
three seconds and opens it read-write, so it stays off unless a player asks for it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The input-stream overrides open the default recording device whenever the game asks. The setting keeps the earlier
refusal available, the stream-purge crash fix holds either way, the device name and log lines no longer say Windows on
every platform, and the error result is named.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The faster cache writes leave the .spv, .res.json and .use files unflushed and rely on the checks every read makes. The
setting puts the earlier flushed, written-through writes back for a drive or setup where a torn file shows up.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
vk_gpu_written's stamps, which the texture cache needs, made mirror_sync copy the same pages back up into the mirror
the write-back had read them from: outdoors about 57 of the 60 MiB copied up a frame, about 5 ms of GPU time.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HtayeqEG2x5woYzWuEQBGV
Ranges just above the old 4 MiB limit were copied back over PCIe at the end of every submission. A larger snapshot pool
keeps the extra merges from allocating on the replay thread. NX2NAVI_WB_MERGE_MAX sets the limit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HtayeqEG2x5woYzWuEQBGV
The draw path called getenv("NX2NAVI_SKIP_PROG") for each of ~2,000 draws a frame, and getenv walks the whole environment block: in a replay-thread profile it was a sixth of the samples. That switch, the polygon offset log and the ASTC alpha probe now read the environment once. The replay's cost per draw went from 3.7-5.0 us to 1.2-2.8 us in play, and the mean frame rate by minute from 60-131 fps to 103-243 fps (different places in each run, so the figures are approximate).
cfg_get and cfg_value keep each thread's answers per name until the settings version changes (cfg_set, cfg_reset, cfg_load, and cfg_setenv, which the code that sets NX2NAVI_ variables in the process's own environment now uses); NX2NAVI_CFG_MEMO=0 asks every time.
The texture pool creates at most pool_create_budget (NX2NAVI_POOL_CREATE_BUDGET, default 16, was a fixed 64) new texture entries per refresh. The refresh holds the texture lock throughout, and streaming new textures in made 20-40 ms frames; at 16 the lock was held 5 ms per slow frame instead of 24 in a dense area, and the frames over 25 ms in a heavy minute fell from 111-188 to 89, with no pop-in seen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
lock_time (NX2NAVI_LOCK_TIME) makes the replay threads time each lock they have to wait for, kept per asking site (platform.h plat_lock_timing, plat_mutex_lock_at and plat_rmutex_lock_at carry the site), and the frame-time summary lists the sites with the most wait, the recorder's full-ring and drain waits, and the texture lock's holds over 1 ms with the code that took it. replay_time now also keeps each frame's replay ops: a frame over 25 ms charged to the replay says how many draws, binds and transfers it replayed, their time, its slowest op, and how much of the replay's wall time the thread was on the CPU. NX2NAVI_PROFILE_REPLAY=1 samples only the replay thread without call chains, and the profiler now follows the thread that replays instead of the one that started the back end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
texup_log_ms logs a "texup:" line for each frame whose texture work on the render or replay thread
reaches that many milliseconds. The line splits the time into texture creation, staging, storage
copies, ASTC recording, scratch buffers and new device memory, to show where an area load's hitch goes.
astc_scratch_keep keeps the ASTC decoder's scratch buffer across upload batches instead of making a
new 64 MiB buffer for each batch. astc_arena stages GPU-decoded ASTC blocks in the staging arena
instead of a buffer per texture. Both aim at the allocation churn seen during area loads and stay off
until a play test measures them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NX2NAVI_AUDIO_STATS=1 logs output underruns, late passes of the audio render thread, waits for the renderer lock,
late audio updates from the game and voices that ran out of queued sound, each with the game frame, to find where
a crackle comes from. NX2NAVI_AUDIO_GAME_PRIO raises the thread that sends RequestUpdate while its update is read
(1) or also keeps it above normal (2). Both are off by default, so the audio path behaves as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NVIDIA 621.01 reuses a pipeline-cache.bin entry only in the executable that wrote it, so every renamed or updated exe
compiled all of its pipelines again (23 s boots, 17 % read from a 470 MB file). With NX2NAVI_PIPE_BINARIES=1, where the
driver has VK_KHR_pipeline_binary, every pipeline, stage library and compute pipeline is looked up by its driver
pipeline key in pipeline-binaries.bin and made from the stored binaries; anything not stored is compiled once with its
data captured and appended. Each binary is stored once under its own key: nearly every graphics pipeline carries the
same 2 MiB binary, which made a first version of the file 7 GB. pipeline-cache.bin is not used while this is on. The
knob is off by default while it is being tested; NX2NAVI_PIPE_BINARIES_MAX_MB caps the file.
NX2NAVI_ONESHOT_WAIT_MS sets how long a draw into a target the previous frame did not render waits for a pipeline built
for the first time before it is skipped; the default keeps the old 30 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game's ACES tonemap shader gets a GLSL function linked into its SPIR-V where it clamps each channel: the game's SDR result upgraded to the HDR range by luminance and mapped to the display with the RenoDRT curve, exposure, highlights, shadows, contrast, saturation, highlight saturation, blowout, flare and hue correction. The settings reach it as four vec4 the support buffer gains at 1440. The present encode is a port of the swap chain pass: gamma correction, gamut compression, the peak clamp and PQ. Without an HDR10 swapchain the shader gives the game's own SDR picture; native HDR is unchanged.
The menu offers Off, RenoDX and Native, with gamma correction, the tone mapper and its grading rows. The shader build compiles sources marked "keep functions" without optimisation so their functions survive for the splice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Large compute shaders that no cache holds are built on one background thread after the boot prebuild, smallest first, so their first dispatch no longer compiles them on the replay thread. NX2NAVI_BIG_BUILD_MAX_MB stops that builder once the process has grown by that much: on a 31 GB machine one of these shaders took the process up by 12.8 GB and the game stuttered while Windows paged. The builder takes the queue under its lock and copies each entry out before compiling it, so a shader queued meanwhile cannot free the arrays under it. The same change reports what pipeline-cache.bin gives back, and starts over when the file grows past NX2NAVI_PIPELINE_CACHE_MAX_MB.
A tensor-core program is now tested before its shader is asked for, in both dispatch paths. It runs the stand-in while NX2NAVI_NATIVE_TENSOR is off, and translating it anyway recorded four AI-upscaler shaders of 0.87 to 4.4 million SPIR-V words that this game never dispatches natively. Process memory went from 29.3 GB to 24 GB and the multi-gigabyte builds during play are gone.
The frame-time summary says which part a slow frame went to, and with NX2NAVI_REPLAY_TIME how the replay splits between draws, binds and transfers; NX2NAVI_SVC_SLOW_MS logs the kernel services that block, with the thread they blocked on. prof_report.py reads the map this build writes and adds the image base to a runtime Rip, so a profile resolves to function names instead of question marks.
build_xlate.py applies the patches with GIT_CEILING_DIRECTORIES set to the build folder's parent. Inside a checkout git read 0021-prmt-byte-permute.patch's paths from the repository's top, skipped every file of it and still exited 0, so PRMT was missing from locally built translators and every byte permute was a no-op. A Skipped patch line now fails the build. The note in AmpereLowering.cs that said the translator emits nothing for PRMT is corrected.
Performance: draws reuse the bindings that did not change and record only the dynamic states that differ from what
the command buffer holds; small uploads come from a staging arena; finished submissions are held briefly and handed to
the queue in batches; the recorder thread can keep a CPU core of its own; ASTC block-linear textures are deswizzled on
the GPU; dynamic resolution steps the upscaler mode to hold a frame-time target. Each has a setting in nx2navi.ini
(bind_reuse, dyn_delta, stg_arena, submit_batch, recorder_core, recorder_prio, astc_gpu_deswizzle, dyn_res) and the
staging cache now frees what it holds at shutdown.
Capture: NX2NAVI_DUMP=key saves the frame after each press of Insert, with mesh draws listed by task, mesh and fragment
shader, depth test and face culling, and mesh_prims.txt giving each mesh draw's primitive, clipping and fragment counts.
All of it is off unless NX2NAVI_DUMP is set.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A pool whose mirror did not fit the VRAM budget stayed imported for good, however hot, while mirrors nothing had used for minutes kept their memory. Now a new mirror that does not fit takes the room of mirrors no submission synced for 120 submissions, least recently synced first; a pool refused for the budget asks again after 600 submissions; and above the texture pressure threshold (90% of the budget) mirrors idle for 600 submissions go every 8 submissions so the textures get the room. A victim has nothing in the submission being recorded and its GPU writes are already back in guest memory; its device address table pages move back to the imported buffer (vk_gpa_remap_plain) and the mirror is destroyed once the submission is done. It is mirrored again from a whole copy at its next buffer use. NX2NAVI_MIRROR_EVICT=0 turns it off.
Measured with the budget taken as 16 GiB, same route: off, 691 mirrors (910 MiB) and 133 pools refused for the budget; on, 405 mirrors (799 MiB): 240 idle ones (98 MiB, title-screen and loading pools) evicted, 114 pools refused. That exe still evicted idle mirrors under pressure for the textures, which a later commit removes, and asked refused pools again every 16 submissions (1,795 times), which another commit spaces out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Above the VRAM pressure threshold (NX2NAVI_TEX_VRAM_PRESSURE, 90% of the budget) only released textures went before, so a scene whose live textures alone passed the budget kept growing into system memory. Once the released ones that come back intact are gone, live textures go too, least recently looked up first: only those whose content their storage still holds (CPU-written, never drawn into) and that no lookup reached for 240 submissions and 120 presents. The texture pool refresh looks every registered slot up each submission, so no live descriptor names them; the next use creates and uploads them again. Up to 64 per check, until the use is 2% under the threshold, and the next check waits for the GPU to pass the submissions that may still name the freed images. NX2NAVI_TEX_EVICT=0 turns it off.
Measured with the budget taken as 16 GiB (NX2NAVI_VRAM_BUDGET_MB=16384), same route, the exe at this commit and the next one: with the eviction off, 17,479 MiB in use in the world, of which 12,321 MiB textures, 37 MiB of them idle; with it on, 43 idle live textures (10 MiB) went in about 6,000 frames. In the world nearly every loaded texture is named by a descriptor, so the eviction frees memory mostly once an area or a menu is left. That run predates the later fixes (the idle clock in pool walks, the free space inside blocks); an earlier run without them emptied VRAM, as the commit that stops the evictions from emptying it says.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With it set, the mirror budget check and the texture pressure checks compare with at most that many MiB, so a large card behaves as a small one does when video memory runs low. The heap lines still log what the driver reports.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
pad_layout = playstation plays a pad by label as xbox does, named for a PlayStation pad: cross A, circle B, square X,
triangle Y. The prompts follow it like the Xbox layout, by label. Under Automatic the note says PlayStation for a pad
whose bottom button is labelled cross. The layout description in each menu language now says what every choice does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Controls tab has a Button prompts row again, with Nintendo, Xbox and PlayStation. prompts = playstation is a new
value next to xbox; nintendo, xbox and pc read as before, and pc stays out of the row as nothing makes its files for
this game. The game reads its prompts at start, so the row says when a restart would change them.
tools/pad_prompts.py writes the overlay folders romfs-patches-xbox, -xbox-label, -playstation and -playstation-label
from the player's RomFS and a folder of button art that stays outside the repository. The button font's glyphs become
outlines traced from the art, the action prompt's letters and the ocarina's note buttons are painted again in their
own BC4 and ASTC formats, and the font's entry in the resource size table grows with it. The by-position folders show
Switch A as B or circle, the by-label ones as A or cross, following the pad layout. The settings probe checks the new
value and folder names.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The event order (vk_exec.c) holds a submission at a wait whose signal has not been replayed. In Kokiri Forest dialogue several presents a second came with the frame's whole submission held (4 held submissions, nothing drawn since the last present): the present showed the picture from before, a flash of the whole picture, and the frame was drawn afterwards in the present thread's empty submission, next to the following frame. With the event order off (NX2NAVI_EVENT_ORDER=0) the same spot had no such frame in 3600.
present_held (vk_backend.c, synchronous replay only): at a present with held work, what can go on runs first in a submission of its own; if work is still held, the present waits and goes out after the submission that replays the last of it, at the next present, or after 8 submissions. present_held = 0 (NX2NAVI_PRESENT_HELD=0) turns it off.
held_sync (vk_exec.c vk_exec_record): a submission without commands of its own that resumes held work now gets the VRAM mirror sync before and the write-back after, and a uniform copy, like any submission. Before, that work read mirrors that had missed the CPU's latest writes, and its GPU writes were dropped from the write-back list by the next submission's vk_mem_mirror_begin. held_sync = 0 (NX2NAVI_HELD_SYNC=0) turns it off.
Not yet measured in play.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In Kokiri Forest dialogue (Saria, dlss = performance) about 1 frame in 20 had no camera, and DLSS started a new history twice for each: 24 to 26 camera resets per 300 frames. The camera block was looked up in the uniform copy of the submission DLSS ran in, which on those frames had none: the frame's work had been held past its present by the event order and ran in the present thread's empty submission. vk_dlaa_draw now keeps the camera rows as the first scene draw read them (vk_usnap_read), and mv_pass uses those. A frame with no scene-context draw at all keeps DLSS's history with zero motion, for up to 6 frames in a row.
Measured at the Saria spot: camera resets went from 24 to 26 per 300 frames to none in 3600 frames (the first frame only). The whole-picture flashes stayed: they come from the presents that go out with that work held, handled separately.
The log now explains frames without a camera, frames without the DLAA point (with the held submissions at that present), light target changes and a second scene after DLSS ran, plus a line every 300 DLSS frames with resets. dlaa_cam_keep = 0 (NX2NAVI_DLAA_CAM_KEEP=0) restores the old camera handling.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Guest code runs ballots and shuffles where the guest compiler had the warp reconverged, for example right after a loop
each lane leaves at a different iteration. Vulkan only promises that with VK_KHR_shader_maximal_reconvergence, so
the pipeline code adds the extension and the MaximallyReconvergesKHR mode to every module that declares subgroup
capabilities. vk_reconverge = 0 in nx2navi.ini turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The foliage's sun shadows took most of the GPU time: one mesh draw shaded about 1,000 million fragments in the far cascade. The far cascade now shades them at a 2x2 rate, and the two far cascades drop one side of the double-sided cards. At the forest entrance the frame rate went from 18 to about 43 fps on an RX 7900 XT.
FSR 3.1, its frame generation and the console mode now take effect without a restart. The full performance overlay lists the settings shown in the options menu.
NX2NAVI_GPU_PASSES times each pass and counts its fragments, and NX2NAVI_SET_AT changes settings at a given frame for test runs. Both are off by default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NX2NAVI_TRACE=audio logs voices starting, stopping and sharing a wave buffer; NX2NAVI_DUMP_MOVIE dumps movie frames; NX2NAVI_LOG_CS_BINDS says why the stand-in for an untranslated compute program skipped a dispatch; and NX2NAVI_TRACE=perf adds heap and commit census lines on their own thread, with VMA maps when write-combined memory grows by 2 GiB. From a tester's fixes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reflex's markers sat at the host present with frame numbers unlike the frame's tags, slReflexSleep was never called, and the low-latency mode was set before any swapchain existed, so it never applied. GfxBackend.frame_start, called from nvnWindowAcquireTexture, now sets the simulation and submit-start markers after Reflex's sleep (skipped once nothing was presented for 200 ms); submit end is set when the frame's submissions went out; the mode is set again after each swapchain (NX2NAVI_REFLEX: 1 on, 0 off, 2 boost); frames are numbered by the game's presents; and the fps counter counts what was shown. NX2SL_VERSION is 3, so nx2navi_dlssg.dll must be rebuilt. From a tester's fixes: 42-45 fps game, 84-90 on screen (was 24).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game's event script times the intro movie's narration and fades by counting updates as 60 Hz frames. At 144 fps everything ran 2.4 times early: each line started over the one before, and the closing fade hid the dream. frame_step_cap_ns caps the rate at the movie's 60 fps from the decoder's start to its end of stream (ov_movie_live); with fps_limit = unlimited the cap is the movie's rate. With RTSS limiting, the game's own limiter holds a new rate until RTSS has applied it. NX2NAVI_MOVIE_FPS sets the cap, 0 turns it off. From a tester's fixes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After an hour at 2160p the 2048 released entries held 5-7 GiB of render targets and decoded textures, charged to Windows' commit as well. NX2NAVI_TEX_RELEASED_MB caps them by size (default 1/16 of RAM, 1-4 GiB), and with less commit free than NX2NAVI_TEX_COMMIT_FREE_MB they are dropped to 256 MiB. Only entries released 120 frames ago or more go, at most 32 a check, oldest first. On Linux the commit check applies only with vm.overcommit_memory = 2 (plat_commit_enforced). From a tester's fixes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Four play-recorded compute shaders of 0.87 to 4.4 million SPIR-V words (the game's tensor-core upscaler passes, which run through the stand-in here) are recorded and so prebuilt at boot. The driver spent minutes and gigabytes on each, four at once, none finished, and every start began again until RAM ran out and the screen went black. The boot prebuild now creates a compute shader over 512K words only from a pipeline cache (VK_PIPELINE_CREATE_FAIL_ON_PIPELINE_COMPILE_REQUIRED_BIT) and leaves it to its first dispatch otherwise. NX2NAVI_LIB_PREBUILD_BIG=<words> sets the limit, 0 the old behaviour. From a tester's fixes: memory flat at 13 GB on the title screen, prebuild done in 463 ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- An empty NX2NAVI_SPIN or NX2NAVI_VRAM_HEADROOM in the environment stopped the game: both read the key with
cfg_bool, and an empty value falls back to the settings table, where these keys have no row. Empty now means unset.
- find_ini checked for 10 bytes after the exe folder's separator where "nx2navi.ini" and its NUL take 12, so an exe
path just under 1024 bytes wrote two bytes past the buffer.
- The performance overlay read the clock before taking the lock, so a frame pushed in between was newer than "now",
the unsigned age wrapped and the overlay showed 0 fps for that refresh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
cfg_load trims blanks around a value and takes one pair of quotes off it, so a mods_order list whose first mod's
folder name starts with a space, or a value that is itself quoted, came back different at the next start and the mod
lost its place and switch. Such values are now written in quotes; others are written as before. --probe-cfg checks it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The picture's height can now be 1080, below the game's own 1440, for slower GPUs: the scene, the DLSS and FSR 3.1
modes and frame generation follow it, and the ultrawide shapes become 2560x1080 and 3840x1080. "Native" keeps its
floor of 1440. The example settings file now documents game_aspect and game_res.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Copying the invalidated ranges from guest memory into the mirror at every submission put the guest's copy of those pages over GPU results that live only in the mirror. In adult Hyrule Field that wiped tree records, and the trees stretched into columns reaching the sky again. With NX2NAVI_READBACK_SYNC=0 the columns did not appear at the same spot. The memory check (NX2NAVI_MEMORY=verify) still finds mirror pages newer than guest memory there with or without the refresh, about 3 per 60 frames, which is left for later.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Small ranges the game invalidates and reads back (the exposure meter) are copied from guest memory into the mirror at every submission that uses their pool, so a CPU write made between recording and the GPU's run is not lost; NX2NAVI_READBACK_SYNC=0 turns it off.
While the boot builds the recorded pipelines a marker file exists next to the pipeline cache. A start that finds it left over records the GPU and driver in pipeline-prewarm-skip.txt, and starts on them build those pipelines at their first draw instead.
CommandBufferWaitEvent is now recorded as OP_WAIT_EVENT. The replay waits for nothing but counts the waits it reaches before their signal, and how many submissions later that signal comes, in the NX2NAVI_TRACE=gfx frame line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Opt the process out of Windows power throttling (execution speed and
timer resolution) at startup; NX2NAVI_POWER_FULL=0 turns it off.
- Fence completion thread wakes waiters before collecting freed memory,
so collection no longer delays them.
- Add a by-region barrier when a draw or clear writes an attachment that
an earlier draw in the same pass sampled; count it and inline uniform
updates in the per-frame stats.
- Hash small texture contents at upload and skip re-uploads whose bytes
are unchanged (removes ~420 redundant uploads per frame in Kokiri
Forest); NX2NAVI_TEX_SAME=0 turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NX2NAVI_DUMP writes sh_<hash>.code next to sh_<hash>.spv: the guest program the shader was translated from, as its
stored inputs hold it, for a disassembler (a compute program as it is, a graphics stage after its 128-byte header).
NX2NAVI_SPV_OVERRIDE=<dir> runs <dir>/<hash>.spv in place of the compute shader whose SPIR-V has that hash, an edited
copy with the same interface, to look at a shader's intermediate values in a frame dump.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In-game menu: the settings window, its tabs, rows, buttons and cursor, the performance overlay and the Preparing
shaders box are drawn with the game's interface textures where the RomFS holds them (runtime/ui/menu_skin.cpp,
perf_panel.cpp; plain shapes until they are decoded). Restart joins Continue and Quit, each behind a confirmation;
VSync is an on/off switch; DLSS is listed only on NVIDIA GPUs; the menu sounds are quieter; Picture shape is gone and
the setting descriptions are shorter; edge cases of input, layout and fonts are fixed. tools/menu_preview.py draws the
menu without the game.
Launcher: Import Saves takes a save from the game folder's saves/ folder or one the player picks; downloads fall back
to Windows' own certificate check when Python's refuses a server; updates are faster; the title bar is drawn in the
window and Navi is every icon. tools/make_game.py builds with CLANG64's clang where the launcher installed it, packs
the RomFS beside the lift and the compile, takes a prebuilt runtime, and compiles the game's resources without cmd.exe,
so a user folder with a space in its name builds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>