Commit Graph

303 Commits

Author SHA1 Message Date
chrg6
a4310491de Let the upscaler stand-in's scratch images make room for a new size instead of refusing it.
The cache kept the first eight sizes and formats for the whole run and refused every other one, so after a few
window, resolution or DLSS mode changes the stand-in's blit of a new size was left out, while the old sizes' images
stayed. A new size now takes a free entry or the one used longest ago, whose image goes through the deferred
destruction after the tonemap pass drops its views of it (vk_tonemap_forget), before another image can take its
handle. tests/scratch_lru_check.py checks the choice.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 23:21:17 -05:00
chrg6
d64a9b689c Move the sprint button's stance host off the water ripples' patch page slot, and fix how presses and timings reach it.
The stance site called page +0xf50, which the 0.10.0 line gives the water ripples above 60 fps: the second
registration ends every 1.1.1 start with "registered twice", the sprint button off included. It calls +0xf30 now, and
the comments say which slots the other sets hold. The set's switch is NX2NAVI_SPRINT_BUTTON_PATCH, not a name another
open request uses for a set of its own.

The stand-still timings count 60 Hz frames (frame_step_frames), so a toggled sprint no longer ends on a short stop at
high frame rates. A press is decided at its start for its whole length: kept from the game and the sprint's when it
begins in gameplay (B: while Link moves), else the game's alone, so a held B is not handed to the game half way and a
B that closes the pause menu starts no sprint. A sprint switched off with the button setting does not come back by
itself, Link's state is read only where the memory is readable, and the row, nx2navi.ini.example and the controls
page say that B is the jump under the game's Swap Jump Controls and name the button without assuming the layout.
tests\sprint_check.py covers the press latch, the menu press, 240 fps and the switch-off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 22:57:56 -05:00
kendo
aab082ff51 Say that the sprint button's B puts the weapon away when Link is not moving, not that it attacks. 2026-11-12 22:55:14 -05:00
kendo
54fa3bc0c7 Offer only L3 and the game's B button as sprint buttons, and name B as the Nintendo layout's bottom button. 2026-11-12 22:55:14 -05:00
kendo
0a4fe144c9 Run the sprint patch set only while a sprint button is chosen, and never switch it on over a start that kept it off. 2026-11-12 22:54:58 -05:00
kendo
6faf4bd7f5 Add a sprint button: a setting that makes Link sprint without rolling first, as a toggle or while held. 2026-11-12 22:54:58 -05:00
chrg6
70c9935789 Give the movie timestamp sites a switch of their own, say what changes in a decoder stall, and keep the movie cap's reasons.
The two sites that count a movie's event frames from the shown picture's timestamp were part of the real-time step's
set, so the only way back to the old count also turned the step off. They are set omovie now, NX2NAVI_MOVIE_PTS
(movie_pts in nx2navi.ini), on by default.

The comment says what the new count changes at the default movie cap: nothing while the decoder keeps up; in a stall
the cues wait with the picture instead of going on with the soundtrack, and step by 2 or more when a picture is
dropped. The counter's reader, main+0x3b3ec10, hands it out as a float frame through a virtual call; its callers were
not traced, so whether a cue on a dropped picture's tick can be missed is said to be unknown, which is what the
switch is for.

The movie cap's comment keeps the measurements it rests on, the narration 2.4 times early and the fade at 65 s of 154
at 144 fps, with one sentence on the new sites. The new test is described in prose with what it does not cover,
instead of a row in the lifter's table.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 22:49:19 -05:00
automata.
feeb504bf4 Drive movie event timelines from the selected video picture timestamp 2026-11-12 22:48:34 -05:00
chrg6
e0870b87b4 Resume a part file only for the file it was begun for.
A part left by a download of other bytes under the same name was resumed, and the result failed its sha256 check
as if the download were damaged. A note beside the part now names the file it belongs to by the expected sha256;
a part of another file is deleted with a log line and the download starts over, and the same file is still resumed
from another server.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:34:22 -05:00
chrg6
9dcd73eebc Refuse a mod archive that holds a name Windows cannot keep.
A file called after a device, ending in a dot or a space, or holding a colon was unpacked into the device, under
another name or as a hidden stream, and the game missed it without a word. On Windows the archive is now refused
with the file's name and the reason; elsewhere such names pass as before.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:34:22 -05:00
chrg6
8c32aedabb Refuse a game folder whose path leaves no room for the game's files.
Windows and the build tools stop at 260 characters for a file's whole path, and a built game needs up to 128 below
its folder. A deeper folder made the build stop in the middle with a file "not found"; Begin Installation and the
install job now refuse it first and name both lengths.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:34:22 -05:00
chrg6
0a85e33e0f Hold the game's profile lock while an import replaces the save.
The window asked whether the game runs before the player picked the save, so the game could start during the dialog
or during the backup's copy and mount a save that was half replaced. The import now takes profile/instance.lock as
the game does: a running game refuses it, and a game started in the middle is turned away by its own lock.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:34:22 -05:00
chrg6
d0e6cd695e Ask the disk for room before a download or an unpack starts.
A disk that filled in the middle ended a download after four tries with an error that named no cause, and an unpack
with half a folder. The rest of a download, the build tools with their unpacked size, an update's archive and a
mod's zip are now measured against the free space first, and the refusal says how much is needed and how much is
free; a disk that fills during a download is named as full at once.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:34:22 -05:00
chrg6
c5cb67645e Write the flight dump and the memory map through a temporary file and a rename.
The window's close ends the process under the detached threads, so a dump file the flight recorder's thread was
writing stayed cut short under its own name. Its three files are now written as .part and renamed when complete
(runtime/part_file.h, with a check that kills a writer in the middle), and the allocator's map goes through
plat_file_write_cached. The shader identities and the other cache files already went through an atomic write.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:34:22 -05:00
chrg6
cc0e2c4bf4 Say at the next start which job the launcher was stopped in.
A job that writes into the game folder leaves data/job-running.json while it runs and removes it when it ends. A
launcher closed or killed in the middle leaves it, and the next start logs it and tells the player which job did not
finish and that Rebuild the Game or Begin Installation goes on from the steps that were done.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:34:22 -05:00
chrg6
2a7fda9506 Put a picked mod together beside the mods folder and move it in once it is complete.
Add a Mod copied straight into the mods folder, so a copy that stopped halfway left a half mod there, switched on
at the game's next start. It now goes into a folder beside the mods folder and moves in with one rename; a failed or
interrupted copy removes what it made.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:34:22 -05:00
chrg6
3ca1541e0e Let one process work in a launcher folder at a time, and one job on the same thing.
The window already locked data/launcher.lock, but a second one closed without a word, the command line did not take
the lock, and nothing kept two jobs apart. The lock is now launcher/locks.py: the window, every command but check and
every job that changes files hold it, the one refused says who holds it, and a job names what it changes so that a
second one on the same thing fails before its first step.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:34:22 -05:00
chrg6
ec9dd522b1 Add texture compaction behind NX2NAVI_TEX_COMPACT, off by default.
With the setting on, textures no shader sampled for ten seconds are copied on the GPU out of the emptiest allocator
blocks into the holes of fuller ones, so the emptied blocks go back to the driver. A pass starts when the free space
inside the device-local blocks reaches NX2NAVI_TEX_COMPACT_MIN_MB (one block under VRAM pressure) and the block
table has blocks that hold nothing but such textures, with room elsewhere for what moves. It takes at most four
textures and NX2NAVI_TEX_COMPACT_FRAME_MB a frame, and none in a frame that loads an area, already made or uploaded
textures, or follows a long one. A released texture the size cap would drop is dropped instead of moved.

Only a texture whose image holds what the game's memory holds moves: uploaded, never written by the GPU, single
sampled, not depth. The entry takes the new image under the texture lock and its address generation moves, so every
slot, pool descriptor and memo resolves again. The old image and its views stay until the texture pool has taken
every set of its ring and the GPU is past the submissions recorded until then, as a retired texture's do.

Each pass logs what it moved and dropped, the blocks and bytes given back, and the time it took. A block emptied of
textures that the allocator keeps is left alone for ten minutes, and a pass that gave nothing back doubles the wait.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:33:29 -05:00
chrg6
d668a62854 Log how much of the allocator's blocks is holes, and how much of that a texture compaction could give back.
A log without the perf trace said nothing about the free space inside the allocator's device-local blocks, which the
driver counts as in use. Every 3600 frames (600 with the perf trace) a "mem: holes" line now gives the blocks and the
allocations in them, and for the memory type the textures use most the blocks that hold a texture, the textures and
VRAM mirrors in them, the blocks at most half full, and those of them that hold nothing but textures that could be
copied elsewhere or dropped: emptying those is the most a compaction could return.

The counting is runtime/vk_tex_compact.h, which also chooses the blocks to empty, with tests/tex_compact_check.py.
A texture entry keeps the block its memory lies in, so the table is built without asking the allocator per entry.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:33:29 -05:00
chrg6
f2a5800c1e Merge the stability pass's fixes for the points its review found.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>

# Conflicts:
#	runtime/cfg.c
2026-11-12 22:32:48 -05:00
chrg6
1a206434e0 Build the mesh pipelines' stage libraries ahead of their draws, at the preparation and at boot.
The preparation and the boot build the stage libraries of single shaders. A mesh pipeline's pre-rasterization
library needs its mesh stage and its task stage together, and its fragment shader library depends on what that mesh
stage leaves unwritten, so only a pipeline record names what they are made of.

Every listed mesh pipeline the preparation builds and every recorded one the boot queues now notes its two shader
libraries, each key once. The preparation builds them on every core after the listed pipelines and before the
pipeline cache is saved, inside the marker that covers a driver dying on a listed pipeline. The boot builds them on
one thread at idle priority beside the game, behind the memory gate, with the rest of the library prebuild
(lib_prebuild = 0 leaves it out). Each is destroyed once built, which leaves it in the pipeline caches and the
driver's own, as for the single shaders' libraries.

A mesh pipeline of known stages that a draw meets with other targets, another blend state or sample count then finds
its libraries in the caches and is linked, where it was compiled whole. The recorded and listed mesh pipelines are
still built whole ahead of play, also on a machine that leaves the rest of the shared list to its first draw.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:31:13 -05:00
chrg6
17aee6ea73 Link mesh pipelines from stage libraries like the vertex pipelines.
A mesh pipeline (task and mesh stages: the foliage, the grass, the terrain) had no stage libraries. Each new one was
a whole build, 0.2 to 1.1 s the first time foliage of a kind appeared, and its draws waited or were left out of the
picture until it was done.

Where the graphics pipeline library is on, a mesh pipeline is now linked at its first use from three libraries and
its whole build follows behind, as for a vertex pipeline. Its pre-rasterization library holds the task and mesh
stages and is keyed by both shaders. No vertex input library is linked: a mesh pipeline has no such state. Its layout
is a stage-independent pair, the mesh and task stages' bindings in set 0 and the fragment stage's in set 1, so the
fragment shader library can be the one a vertex pipeline uses. That library's key now also carries what a mesh
pipeline's fragment module gets filled in and whether the shading rate is dynamic state, which the pre-rasterization
and the fragment shader state both hold. The fragment output library is shared as it is.

The fast link on the library workers, the wait of a draw for its libraries and the pipeline hints take mesh pipelines
in. The summary counts them by themselves: fast links and their time, how long the ones a draw missed took to become
usable, and the libraries made for them.

NX2NAVI_GPL_MESH=0 (gpl_mesh in nx2navi.ini) keeps the whole build. It is also kept without the pipeline library, on
a device that draws no mesh pipeline, and where mesh pipelines alone are built without the driver's optimiser; the
start logs which is in use and why. The mesh emulation of the low-end GPU mode is not touched.

A mesh pipeline with libraries is another pipeline to the driver than the one built before, so an install's recorded
mesh pipelines are compiled once more at the first start with this change.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:31:11 -05:00
chrg6
9100509b00 Enable the drivers' low-latency extensions only in a run that starts with the setting on.
With the setting off the device is made exactly as before the mode existed, so the mode cannot change anything for a player who never turns it on. Turning it on in the menu then takes a restart, and the row says so; in a run that started with it on, changes still apply at once.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:30:56 -05:00
chrg6
b197136f56 Describe the profile-guided build of game 1.1.1 and the session that trains and measures a profile.
The section described the build of the other game versions with an example for 1.4.3. It now says how make_game.py
takes a kit's profile and when it leaves it out, which LLVM releases write and read the file, which packages the
instrumented build and the merge need, and the steps of a training session for 1.1.1: the build command, where the
game is started, what to play, where the counts land, the merge, and the comparison of both builds with the runtime's
sampling profiler and its frame timings.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:30:46 -05:00
chrg6
0b974d04f1 Carry an execution profile in a launcher release.
make_launcher.py --pgo FILE puts the profile and its record into app/<version>/data, where make_game.py looks for it,
before the prebuilt runtime is built, so the runtime library is compiled with it. The profile is part of the app zip
the update feed serves, so the build after an update compiles with it. The release stops before it downloads or
builds anything when the record names another recomp/ than the checkout's, and after the runtime library when the
release's compiler, the one players build with, left the profile out.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:30:46 -05:00
chrg6
a84a555128 Describe the low latency mode in the architecture document.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:29:59 -05:00
chrg6
d9bc002d9a Play the game's own amplitude at the default vibration strength on the HD rumble path.
The default strength is 130 to make up for what two motors lose. A linear actuator that takes the game's value needs none of that, and 1.3 times the amplitude clipped the strongest pulses at the safe maximum. The HD path now divides by the default, so the setting scales from the game's own amplitude.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:29:04 -05:00
chrg6
aeb6c0d5c1 Add the HD vibration row to the Controls tab and describe HD rumble in the controls guide.
The row switches rumble_hd and is greyed out, with a note of what it needs, while the gamepad in use is not a Switch
Pro Controller or Joy-Con. Its texts are in all four menu languages.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:28:36 -05:00
chrg6
59e3c6c35a Add the encoding and the report schedule for HD rumble on Switch controllers, with their check.
runtime/rumble_hd.c turns one of the game's vibration values (a low and a high band, each with a frequency and an
amplitude) into the four bytes a linear actuator's rumble report takes, clamps the frequencies to each band's ends and
the amplitude to the last safe step, and decides when a report is written: the newest value only, a held one again
every 30 ms, the neutral value three times once the game stops. Nothing calls it yet.

tests/rumble_hd_check.py builds it alone, checks known values, the clamps and a batch reduced to its reports, and
decodes a sweep of values with formulae of its own.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:28:36 -05:00
chrg6
4a6ba66115 Tell a start that was closed or stopped during the boot's builds from a driver crash, and limit the whole warm.
A marker or a journal left by a start that died in the boot's builds was always read as a driver crash. Since the
whole warm those builds run for minutes, so a start ended from outside in that time (the task manager, a program that
stops the game, the power) switched the pipeline prebuild off for that driver for good, or put up to 32 variants on
the skip list that the driver had merely been building. Closing the window was already an orderly end and still is.

The crash handler now leaves a note while the boot's builds run. With the note the next start does what it did: it
skips the prebuild, or the variants the journal names. Without it the end is taken for a stopped start: the pipelines
are built again and the journal's variants are blamed on nothing. Three such ends in a row still skip the prebuild,
for a driver that ends the process without a fault the handler sees. The boot's journal has a file of its own, so the
preparation's keeps its meaning.

The whole warm waits prewarm_full_s seconds at most (600): when they are up the game starts, the builders step down
to the background's thread counts and priority, and the file says "done", so the boot screen has one turn per driver.

tests\boot_warm_check.py covers what a leftover marker means with and without the note.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:24:22 -05:00
chrg6
264dbe42cc Merge the stability and memory pass into the 0.10.0 line.
Conflicts: the settings key lists and section maps take both sides' entries.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 21:49:17 -05:00
chrg6
cd0b1a387d Do the whole warm on the boot screen at the first start after a driver change.
A start that finds the pipeline cache written by another device or driver has nothing built, and everything was
compiled beside the game: an 8-core integrated GPU drew fewer than 600 frames in its first 11 minutes. Such a start
now waits on the "Preparing shaders" screen, with counts, for every recorded pipeline, for the compute pipelines on
every core at normal priority, and, when a sample says the driver's own cache lacks the prepared stage libraries, for
all of them on every core. The memory gate still holds for the builds, and the library builds write the preparation's
journal while the start waits, so a variant the driver's compiler dies on is skipped from the next start on.

boot-warm-owed.txt beside the caches names the GPU and driver: a start closed during the warm is followed by one that
goes on with it, three at most, and "done" keeps later starts ordinary while the cache file still carries the earlier
driver's header. When the boot stops waiting (prewarm_wait_ms, or a minute without progress) the builders step down
to the background's thread counts and idle priority. prewarm_full = 0 turns the warm off.

With nothing in the driver's cache the probe took 425 s on an RTX 5090 with 16 CPU threads: 87 s for 5,775 recorded
pipelines, 19 s for 4,075 compute pipelines and 317 s for 42,231 prepared variants.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 20:03:12 -05:00
chrg6
97c3bac3bd Keep a small buffer clear and the counter reports of the same record in the order of the stream.
A ClearBuffer or ReportValue is a fill the GPU makes where it stands in the stream, and guest memory has its bytes once the GPU got there. A counter report reaches guest memory as a CPU write after its submission's fence, and a render condition reads the record when it is replayed. So a report followed by a clear of the same record ended as the report (in one submission always, across two when the completion thread was behind the GPU), and a condition replayed after the clear read what memory held before the fill, or the 0 of the report the clear had overwritten.

A clear of at most 256 bytes into CPU-visible memory is now also applied at its place in the replay to the records it covers that a counter report went into: the covered bytes get the value in guest memory at once, reports replayed before the clear leave those bytes alone when their write comes, a condition reads them from memory, and a report replayed after the clear writes the whole record as before. The GPU's fill is recorded as before. Other small clears stay the GPU's fill alone: the GPU reads guest memory too, at once in an imported pool and through the next upload of the written page in a mirrored one, so a write ahead of it into a draw count or an atomic counter would reach passes that still want the old value. NX2NAVI_CLEAR_SMALL_CPU=0 turns it off.

Whether the game clears counter records is not known. The pass timing captures of 75 scripted runs show one buffer fill a frame and nothing else about it, and the frame dump does not list buffer fills. The periodic vk_usnap line now counts the small clears, the last one's size, value and address, how many covered a record with a report, the reports into bytes cleared before, and the report writes that left cleared bytes alone.

Checked with a build of the dev exe, the launcher tests, the device address table check, and a scratch link of vk_exec_xfer.c against stubs that replays reports and clears in both orders. Not run in the game.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 19:49:40 -05:00
chrg6
222a025c52 Give back what a host thread keeps for itself when it ends.
Every guest thread is a host thread, and the game makes and ends them all through play. A thread that slept through plat_wait_ns kept a waitable timer, one that read or wrote a file an event for each, and one that decoded zstd through the host a decoder context of about 100 KiB; nothing closed or freed them when the thread ended, and a detached thread's own record stayed allocated. They are now given back when the thread's function returns: the handles in win32.c thread_main, the decoder context through plat_thread_end_hook, and the record by whichever of the thread and its detach comes last.

tests/thread_end_check.py runs 416 such threads and compares the process's handle count before and after. tests/sync_wake_check.c gets the two stand-ins kernel.c has needed since the service wait log, so that check builds and passes again. The Linux file only gains the hook call and was not compiled here.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:18:25 -05:00
chrg6
641c866e8a Catch up after a stall of the audio renderer by rendering the owed frames without queueing them.
A frame that was not rendered when it was due stayed lost: the timer set its
deadline to now once it was more than 100 ms late, and the device-paced path
only filled the ring to its target again, so after every gap the sound was
heard that much later than the picture it belongs to.

Frames that are owed are now rendered and dropped: mixed in full, so the
voices, the effects and the sinks the game reads back advance, and not queued
for the device, whose queue is filled to the same target afterwards. While the
device paces, what is owed is the silence it played for want of frames,
counted in its own samples from an underrun until the prefill is queued again;
the wait for the first prefill and anything owed across a stop do not count.
On the timer a frame is owed when its deadline passed a whole frame ago. A gap
of more than 3 seconds is not caught up: the sound goes on from now.

NX2NAVI_AUDIO_CATCHUP=0 turns it off and keeps the old timing. The audio
statistics line counts the catch-up frames and the gaps that were too long,
and tests/audio_mixer_check.py checks the device's side of the accounting.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:17:48 -05:00
chrg6
42d16e7f0b Ramp a changed volume across the audio frame instead of applying it at once.
The mixer applied each voice's mix volume and each splitter destination's
volume to a whole 5 ms frame as one constant, so the level jumped at the
frame's first sample whenever the game moved a volume, which is heard as a
click. It now keeps what each voice and each splitter destination was mixed
with in the frame before and goes from there to the new value in equal steps
across the frame's samples, as the console's renderer does. An unchanged
volume stays on the constant path.

A voice that has just started, one that was silent in the frame before or was
moved to another mix or splitter, a destination that is new or was moved, and
the first frame after the renderer starts take the new volume at once.

NX2NAVI_AUDIO_RAMP=0 turns the ramps off. The audio statistics line counts the
render passes that ramped a volume. tests/audio_mixer_check.py builds the
mixer with the rest of the runtime stubbed and checks the ramps and the cases
that must not ramp.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:17:48 -05:00
chrg6
202fd47ceb Let the flight recorder dump on its own when one frame flashes.
With flight = 1 and its thumbnails kept, the recorder now also writes a dump when a frame's picture differs strongly from the frame before and the frame after while those two agree, which is what a one-frame flicker looks like. Each thumbnail is reduced to 16x9 cells of mean brightness where the present thread already sees it complete, and a frame is a flash when at least three cells are more than 24 of 255 brighter or darker than in both neighbours, the neighbours being alike in those cells, around them and over the picture as a whole. A camera cut, a fade, a pan and shapes crossing the picture are no flash, and a frame beside one without a thumbnail is not judged. The dump is the one F8 writes, named "flash" with the frame's number in its header line, at most one every 30 seconds. flight_flash = 0 turns it off; flight_flash_diff and flight_flash_cells set the two thresholds.

On the thumbnails of earlier dumps the defaults flag the frames whose scene was white once and nothing in the runs without that fault. tests/flight_flash_check.py checks the test itself on drawn pictures.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:16:30 -05:00
chrg6
95dc476ee7 Scale the scene with the edge-adaptive filter where the game's own upscaler ran.
The stand-in for the game's upscaler enlarged the scene with a linear filter, which is softer than the console's picture. It now enlarges with the edge-adaptive filter the present already scales to the window with: the same shader, built a second time with a constant set so it squares what it filtered, as the linear pass does. The stored square-root values are filtered as before and the decode is the same. standin_filter = bilinear brings the linear pass back, and the setting is live. The linear pass also stays where nothing is enlarged and while DLSS or FSR 3.1 runs, since that upscaler scales the scene itself and its picture goes over the stand-in's. The movies do not go through this pass and are not changed.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:16:18 -05:00
chrg6
6d049c244f Keep the water's ripples moving above 60 fps by carrying the step's fraction for each water object.
The water renderer runs trunc(step) times the water's substeps of its ripple simulation a frame, which is none while the step is under one frame: the rings stood still above 60 fps. A new site of the set ostep hands the cut to frame_rate_water_host, which adds the step to a remainder kept for the water object and returns the whole steps in it. The waters have a table of 64 slots of their own, as fewer slots than surfaces would have them take each other's in turn.

frame_step_check.py calls the water and day hooks as their sites do. It also gets the three platform stubs it has lacked since the day clock's hook, without which it did not link.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:13:19 -05:00
chrg6
cc0b467a2c Gather the log lines of a quarter of a second and write them at once.
The log thread wrote as soon as it woke, which outside a burst is once for every line: each line woke it and was a write of its own to the log file and the console. It now waits a quarter of a second from the first line it finds, or until the queue is half full, and writes what was queued by then at once, so the log is up to that much behind the game. What is being gathered stays in the queue, so a fatal error, a crash report and an exit write it out before their own lines as before; a game ended from outside loses those last lines. The queue's test checks the gathering, the half-full write and that a process which ends at once, by an exit or as a fatal error does, leaves every line in its file.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:12:51 -05:00
Vasilis Manetas
eaf10677fa Import guest memory as dma-bufs through udmabuf on Linux instead of keeping shadow copies of it.
On Linux every CPU-visible pool had a host-visible shadow copy, because amdgpu treats a host-pointer import as a userptr object that it looks up again at every submission and invalidates whenever the write watch or a freeze re-protects its pages. Now the watched reservations are shared mappings of one memfd, /dev/udmabuf makes dma-bufs of page ranges of it, and the device imports them (VK_KHR_external_memory_fd, VK_EXT_external_memory_dma_buf). A dma-buf pins its pages once and is not tied to the process's page tables, so protection changes leave the GPU's mapping alone, and nothing is copied.

RADV puts every imported memory object into every submission, so pools share their imports: guest addresses are cut into 64 MiB spans (NX2NAVI_DMABUF_MB), and each pool is a buffer bound into its span's memory at its offset. A new span is cut back at the spans already there, so spans overlap only where a pool itself lies across an older span's edge, since amdgpu counts every span's pages in its GTT use. A decommit punches the pages out of the memfd, or zeroes them in place where a dma-buf pins them, and the pages a freed span pinned that nothing committed go back to the system.

It is on by default where /dev/udmabuf opens, udmabuf's size_limit_mb is 1024 or more, the device has both extensions and NVIDIA's kernel module is not loaded. A start-up probe imports one page as the pools will be; any refusal keeps the shadow copies, and the log says why. NX2NAVI_DMABUF=0 keeps the copies. tests/platform_dmabuf_test.c checks the shared mapping without a GPU, and docs/building.md ("Memory") describes the imports and what they need.

RX 6800 XT (RADV, Mesa 26.2.6), one build, interleaved pairs with NX2NAVI_DMABUF=1 and 0: Kokiri Forest 60.7 against 40.3 fps (3 pairs, +51%, standard error 0.4), 1% low 50.9 against 34.0, frames over 25 ms 5 against 768; Hyrule Field 55.7 against 42.4 fps (2 pairs, +31%, standard error 0.4). No pool was left without a span, no span was refused, and --probe-vkmem passes with and without the imports.
2026-11-12 15:00:27 -05:00
chrg6
d48a3d59f8 End a helper run with its own exit code when a library faults while the process is ending.
The shader preparation modes and the probes return from main, and the C runtime's exit then calls the detach of every library in the process, those other programs put there included. On a player's PC a post-processing injector's Vulkan layer read a null pointer there at the end of every --warm-shaders and --prepare-shaders, four runs over three versions: each printed "variants built into the driver cache", then a FATAL, and ended with code 71, so the launcher logged a finished preparation as one that did not finish. The crash handler now ends such a process with the code its mode returned and one "exit:" line; a fault while the mode still runs, or in the executable's own code on the way out, is reported as before. A crash inside that injector's library also gets the note that the library is not part of the game.

--probe-crash-exit makes the fault from an atexit handler, and tests/exit_fault_check.py checks both cases.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 14:57:13 -05:00
chrg6
26f3dc47ec Show the low-end GPU mode's settings under its switch in the Game tab, and read them only while the mode is on.
The settings had a tab of their own; they are rows of the Game tab now, listed under the switch once the mode is on after a restart, and the tab is gone. With the mode off every one of them reads as unset, whatever nx2navi.ini or the environment says, so nothing of the mode acts unless a player turned it on; the build reads guest_opt the same way. The notes describe that, and take the white edges in towns and the dropped textures from the known issues to the fixes.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 13:59:43 -05:00
chrg6
857d22fe4f Apply texture and sampler registrations between submissions, in the order the game made them.
A registration the game made while a submission was being replayed changed the slot table under that submission,
whose texture pool set is written as the replay goes and read when it runs. Such a registration now waits and takes
effect once the submission has gone to the queue; with the replay on its own thread it goes into the replay queue
ahead of the next item. NX2NAVI_REG_ORDER=0 restores the old behaviour. In a town session the white kerb, stair and
wall-top edges of single frames were gone with it; the log counts the registrations that waited.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 13:58:36 -05:00
chrg6
d2fbaba1c3 Put the low-end GPU mode in the settings menu's Game tab, marked experimental.
The row sets low_end_gpu, read at start, and says what the mode turns on and that it was measured on one card; its text is there in the menu's four languages. The key is decided again once the settings file is read.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 13:06:02 -05:00
chrg6
2324a74602 Turn the settings for older graphics cards on with one key, low_end_gpu = 1, and leave them off without it.
Mesh shaders as compute, the texture that gets memory of its own, staged mirror uploads and the shorter wait for the GPU, widened write-watch queries, the video memory limits and reserve, early upload batches, the asynchronous replay, the hot-pool rule and the recording thread on AMD cards without mesh shaders were measured on a Radeon RX 580 and run on no other card. Each keeps what 0.9.1 did unless the key or its own setting says otherwise; the key gives the defaults the way the device profile does. The notes describe them as that option, hold main's two new entries in one Changed section, and list the white edges in towns as a known issue.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 13:00:13 -05:00
chrg6
052c60dc0d Merge remote-tracking branch 'nx2navi/main' into release-0.9.2 2026-11-12 12:56:51 -05:00
epicmeme546
385734dcc0 Sharpen FSR 3.1 more below a render scale of three quarters: its own sharpening towards the maximum, and a second, lighter RCAS pass over its picture.
FSR 3.1 was soft at Performance and Ultra Performance, most of all in motion. On a village save, while the camera turned at a steady rate (present screenshots every 0.4 s, the mean absolute Laplacian of the scene's luminance): FSR 3.1 Native AA 6.7, FSR 4 Performance 5.9 and Ultra Performance 5.4, FSR 3.1 Performance 4.0 and Ultra Performance 3.3. The library's own input checks found nothing wrong, and its tuning constants (velocity factor, accumulation per frame, shading change scale, behind the test switch NX2NAVI_FFX_KEYS) gave nothing or took detail away. Its own sharpening at 100 instead of the default 80 gave 5.0 and 4.1.

Now the share of extra sharpening grows from none at three quarters of the output's width to all of it at half (vk_dlaa_fsr3_boost). FSR 3.1's own sharpness goes that share of the way to its maximum, and its picture gets a second RCAS pass (shaders/dlaa_sharpen.comp, AMD's FSR 1 header with the linear light taken through c / (1 + max c) and back), before the HUD is drawn. Both follow the sharpness slider; 0 turns them off, and NX2NAVI_FSR3_SHARPEN=0 leaves the second pass out. At RCAS's full strength the pass took Performance to 8.2, past Native AA, with grain on every surface, so it runs 1.5 stops weaker: Performance 5.7, Ultra Performance 4.7, Quality 5.2. 63.4 fps against 65.1 without the pass. The HDR picture is clean. FSR 4 is untouched.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:50:43 -05:00
epicmeme546
7581bb887d Let the free camera go anywhere, and make ground avoidance a switch that is off unless asked for.
The camera kept its height (only ZR and ZL changed it) and rose whenever the closest surface in the lower part of the view came within about three metres, so flying up to a character, a rock or a wall sent it upwards. It now moves where it looks and nothing stops it, the ground included.

Ground avoidance is a checkbox in the debug menu's free camera section. With it on, the nine view distances read back from the lower view become points of the scene (from the view's angles and the camera's pitch), and only a column whose lowest surface rises by less than about 30 degrees counts as ground: the camera goes no lower than a metre above it. Steeper things, objects and walls, are left alone. The read-back runs only while the switch is on.

Tested on a village save, 4 m/s forward for 5 s and then ZL for 4 s: with avoidance off the camera ended 17.4 m lower, through the floor; with it on it ended 0.7 m lower and held there. Flown at Link with the first version of the ground test, its height did not change.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:50:43 -05:00
chrg6
eccbc96873 Add the shadow bias fix to the 0.9.2 notes.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:40:43 -05:00