Windows and the build tools stop at 260 characters for a file's whole path, and a built game needs up to 128 below
its folder. A deeper folder made the build stop in the middle with a file "not found"; Begin Installation and the
install job now refuse it first and name both lengths.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The window asked whether the game runs before the player picked the save, so the game could start during the dialog
or during the backup's copy and mount a save that was half replaced. The import now takes profile/instance.lock as
the game does: a running game refuses it, and a game started in the middle is turned away by its own lock.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A disk that filled in the middle ended a download after four tries with an error that named no cause, and an unpack
with half a folder. The rest of a download, the build tools with their unpacked size, an update's archive and a
mod's zip are now measured against the free space first, and the refusal says how much is needed and how much is
free; a disk that fills during a download is named as full at once.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The total was "length + have or size or 0", which is the part file's size when a resumed answer names no length:
the bar ran past its end. It is now the expected size, else the server's length plus the part, else unknown.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game and the launcher each read nx2navi.ini, change their own lines and put a new file in place, so of two
changes in the same moment the second dropped the first. The mods' switches already refused while the game runs;
the Discord Status switch of the Settings screen now does too, and says to use the game's menu.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A job that writes into the game folder leaves data/job-running.json while it runs and removes it when it ends. A
launcher closed or killed in the middle leaves it, and the next start logs it and tells the player which job did not
finish and that Rebuild the Game or Begin Installation goes on from the steps that were done.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Add a Mod copied straight into the mods folder, so a copy that stopped halfway left a half mod there, switched on
at the game's next start. It now goes into a folder beside the mods folder and moves in with one rename; a failed or
interrupted copy removes what it made.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The window already locked data/launcher.lock, but a second one closed without a word, the command line did not take
the lock, and nothing kept two jobs apart. The lock is now launcher/locks.py: the window, every command but check and
every job that changes files hold it, the one refused says who holds it, and a job names what it changes so that a
second one on the same thing fails before its first step.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
After Keep Build Cache removed the generated sources and the kit was updated, the lift ran because layout.json was
gone while its key still matched. An interruption after layout.json was back left the saved state calling the lift
complete, and the next run compiled unfinished sources. The pull request's two commits (one a merge of main) are
applied here as their net change.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The 0.9.1 notes keep the release branch's text and take main's sections: New, the edge line under Fixed, and Changed.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Mods, on the home screen, opens the game's mods folder, adds a downloaded mod from its .zip, .7z or .rar file or its
folder, switches each mod on or off, and sets the load order (mods_disabled and mods_order in nx2navi.ini, written as
the game writes them). Each mod's description says what it changes, which other mod changes the same files and which
of the two wins, and why the game leaves it off when it does.
Before the game starts, Play puts the mods folder in order (launcher/mods.py prepare): an archive in it is unpacked into
a folder of its name and kept, a mod whose files sit a folder or more down has them moved up, and a romfs, exefs or
cheats folder put straight into the mods folder becomes a mod of its own. An archive that would write outside its
folder is refused, and nothing is deleted.
The launcher's build (tools/make_game.py) left the mods' code cheats and ExeFS patch files out, so those mods stayed
off. The lift now turns them into patch sets first, as the setup does, with the files in the lift's key and
build-cache/mod-code.json recording what it took up. Play builds the game again before it starts when an enabled mod
brings code no build has seen. The shaders' key names the lift and the compile without the mods' code, so such a build
compiles only what the patches change and leaves the shaders prepared. tools/mod_files.py is the one place the tools,
the build and the launcher find a mod's parts.
Tested: a zipped mod holding its own folder, put into a mods folder, was unpacked and moved up by the launcher's code,
and the game served its file in place of the game's. The lifter took a code cheat and a pchtxt patch made for the game's
main as patch sets. The launcher's and the setup's tests pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Run from a checkout, the launcher uses the Python that started it. A Python older than 3.14 without the zstandard
package got through the first-run screen and stopped at Gather Build Tools with only "No module named 'zstandard'",
after the packages were downloaded. toolchain.zstd_missing now looks for compression.zstd or zstandard when the
launcher starts. Without either, the log and the first screen name the Python and give the pip line for
tools/requirements-launcher.txt, and Gather Build Tools stops with the same message before it unpacks anything. A
release's own Python always has the package; if it ever lacks it, the message says to reinstall NX2navi.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The frame step test gets a stub for the debug menu's game speed, which frame_rate.c now reads; the mouse camera test
one for the input script's perf segment mark. The shared save test defined mem_probing twice. The launcher's self-test
draws 16 screens now that both lines added one.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Brought onto the line with FSR 4, its frame generation and the debug menu. Where both sides had added to the same
place, both stay: the patch table keeps the pickup count and the free camera, the settings list keeps both sides'
names, the menu includes the co-op page and the debug menu, and the launcher builder takes the pipeline list and the
FSR 4 folder. Both sides had added the menu's typed-character event; one definition stays, with the window code that
passes characters outside the basic plane.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The prepared list named its shader variants and nothing about where they came from, so an update that keeps the prepared shaders (shader_carry) kept the old list whatever seed the new kit writes: variants only the new seed names, from a newer pipeline list or a change to which variants are prepared, were translated when play first drew them. The existing identities do not cover this: nx2navi_xlate.id and identities.txt name translators, which decide cache keys and what is carried over, not which variants are listed.
The list is now version 2 (runtime/prp_file.h): after the head come the sha256 of seed-programs.bin, the sha256 of seed-answers.bin and the translator identity, written by gfx_shader_prepare_seed; the three readers go through gfx_shader_prepared_read and still read a version 1 list. At an update step_shaders writes the seed first (prepare_shaders.py --no-run, about 4 s) and keeps the list only when its digests are that seed's (make_game.py seed_changed); another seed, or a list that does not say, is prepared again. Another translator alone still carries over: input ids do not depend on the translator, and preparing everything again for it is what carrying was made to avoid.
Checked with tests/prp_file_check.py (the C layout against make_game's reader), three launcher tests, and the exe's --prepare-shaders on a seed without records in a folder of its own: the digests it wrote are those of the seed files, one byte more in the seed reads as changed, and after preparing again it does not. A version 1 list of 42,142 variants and the same list as version 2 are both read whole by --probe-prewarm.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Button Color recoloured the list panel, the description box and the title band, and left the orange choices in the rows as they were, so the buttons themselves seemed not to change. It now takes the rows' label cells, their value cells and the orange choices, which come out a lighter shade of the picked colour; the new Panel Color takes the panels, the dividers and the title band. Text on a light button or panel turns dark, and so does the text in choices that come out bright. The colour is kept as custom_panel in launcher.json.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Custom is the last scheme in Customize Launcher. Its Background Color and Button Color rows open a picker in the description box's place: a square of the hue's colours (saturation across, brightness up and down) with a hue bar under it to click or drag on, Hue, Saturation and Brightness rows for the arrows and the gamepad, and a Hex Code row to type a code into. Each picked colour takes the place of one colour of the first scheme, the backdrop's middle tint or the buttons' wood, and the rest of its group follows it, lighter and darker as in the first scheme; light buttons get dark text. The colours are kept as custom_background and custom_buttons in launcher.json.
The background picture used to fill the whole window, so its top was hidden under the title band. It now fills the window from where the band ends, cut to that shape around its middle and scaled evenly. A copy an older launcher kept for the whole window is cut, never squeezed, and made again from the picture file while it is there.
Add to Steam's description and result are now one plain sentence each.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This line logs every setting nx2navi.ini sets, and a bug report takes a copy of nx2navi.ini along: with co-op both would have carried a room's secret, the relay's address and the player's name to whoever reads the report, and the secret lets anyone into the room. One list (runtime/cfg_private.h: the room's secret, the offer number, the relay, the name, the key a maker removes, the menu's test hook) now serves the log's line, "Copy system info" and the report's copy of the file, in the game and in the launcher: such a key reads "(set, not shown)", every other byte of the file stays.
Also: the last leftovers of the restorations that were left out with the puppets (their settings prefix and section), main.c's byte order mark as it was, and two comments that cited files this tree does not have.
Checked: with a room, a relay and a name in nx2navi.ini the log's line shows all three as set and none of their values; the same text gives the same bytes through the game's scrub and the launcher's (a launcher test, and the C function built alone); the launcher tests, the co-op probe, the relay tests and the tab check pass.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The prompt overlays for the pad layouts repeat the same note pictures, and every one was fitted and encoded to ASTC again for each layout. The encoded bytes are now kept for the build under the picture and its box. With stand-in pictures, 42 note textures over seven layouts came out byte for byte the same from 12 encodes instead of 42, in 0.66 s instead of 2.30 s.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The shader step's progress event rounded its share to four decimals, and the launcher shows the whole percent below it: 42,140 of 42,142 shaders built read as 100% while a long driver compile was still running. The event now carries the share as computed, so the bar stays at 99% until the count is complete. The test feeds the last counts of a 100,000-shader build and fails with the rounding.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The launcher asked for 31 GB where the build's own check now asks for about 34, so a disk between the two passed the first check and was refused seconds later. Both say 34 GB now. The build no longer asks for the whole shader preparation's space when the game folder already holds translations. The texts said 10 to 25 minutes for an install that took players 27 to 41, and 5 GB for a build cache that measures 1.6. A build error's message goes into the launcher's log as one line.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The test of a game folder outside the Basic Multilingual Plane compiled
the whole generated file with the first C compiler it found. The
runtime's headers need clang, so with gcc as that compiler the test
failed on them, not on the paths. It now compiles the four strings alone
with whatever compiler there is, and the whole file when that is clang.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
pad_prompts.py gave each packed game file to the decompressor in one
call, which returns one bytes object grown by copying. On made-up data
of the size of the interface texture archive, 69 MB packed and 244 MB
unpacked, that takes 21 s on a fast PC; players' builds waited 44 to 52 s
before the step's first folder, most of its minute. In 64 KiB pieces
joined once the same bytes take 0.3 s.
The prompts step's key held the digest of the three scripts' bytes, so
this edit would have drawn every install's prompts again, as two of the
last four releases did. It now holds a constant changed by hand, whose
value is the scripts' digest in 0.7.0 and 0.7.1, and a test fails when
the scripts' logic changes, to ask whether the constant must change.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Only the RomFS image's space was looked at, and only when that step
began: a disk that held the image but not the build cache or the shaders
stopped the build in the compile or, half an hour in, in the shader
preparation. The build now adds up what the steps it will run write into
the game folder (the image and 1 GiB, 2 GiB for the build cache, 4 GiB
for a full shader preparation, the least each is known to need) and
stops at once when the disk has less, naming each part and how much is
missing.
On Windows a build whose compile step will run first compiles and links
an empty program with the installed tools, against the libraries the
game links. Tools that are incomplete or blocked stopped the build only
in its compile step, after the image and the lift; the message says what
failed and how to get the tools back.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
romfs_check.py gave the decompressor 4 MiB of a file at a time. Each call
returns its output as one bytes object grown by copying, under the
interpreter's lock: on 32 MiB frames that ran at about 120 MB/s of packed
data on twelve threads, and at about 2,500 MB/s with 64 KiB pieces; on a
1 MiB file at 490 against 3,000. Files smaller than a piece are as fast
as before. The check now stops at the frame's end, so what it says of a
file does not depend on the piece size; a test compares both sizes and
the check as it was on damaged, cut and whole frames.
The scan step's key held the sha256 of the script's bytes, so this edit
would have made every install check its 26 GB again. The key now holds a
constant changed by hand, whose value is the sha256 the script had in
0.7.0 and 0.7.1: the key of every install that passed stays what it is.
A test fails when the script's logic changes, to ask whether the constant
must change.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
modules_c wrote the paths of the game folder as C strings with JSON's
default escapes, which turn a character outside the Basic Multilingual
Plane into two surrogate escapes. C refuses those ("invalid universal
character"), so a game folder with an emoji or a rare Han character in
its path failed at the end of the compile. The characters now stand as
themselves in the UTF-8 source, and a test compiles the generated file.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Every selection of the Updates row started a request to GitHub, which
allows an address 60 an hour: a player who selected it 25 times in 90
seconds had every check of the next hour refused. The row and F5 now
start no check within a minute of the last one.
A refused check said "try again in an hour" whatever the answer held. It
now names the time from the answer's X-RateLimit-Reset or Retry-After.
A failed check wrote two tracebacks, 22 lines, into launcher.log each
time; a FeedError is now one line with its message and its cause.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
build.Run read the build's output on a thread that ended on the first
exception of a line or event handler, such as the launcher's log on a
full disk. Nobody read the pipe after that, the build stopped at its next
line once the pipe was full, and the job waited for it for good. The
thread now counts the line as dropped and reads on, and Context.log loses
a line it cannot write instead of raising.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The build compiles on every processor for ten minutes and more while the
job screen invites the player to keep using the PC. build.Run now starts
make_game.py with Windows' below-normal priority class, which the
compilers and the other processes the build starts take over from it, so
the build gives way to what the player does and loses nothing on an idle
PC.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
make_game.py ran one compile per logical processor whatever the memory.
Without --jobs it now runs as many as 80 % of the free memory holds at
768 MiB a compile, the peak build_game.py records for one, never more
than the processors and never fewer than one, on Windows and Linux alike.
The build's first lines say the number and what decided it.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game exits with 70 after a FATAL line of its own and with 71 after
its crash report, and the launcher said only that the line near the end
of the game's log names the error. It now reads the last FATAL line of
the run from logs\nx2navi.log and puts it into the home screen's message
and into launcher.log, so a launcher log a player sends says what the
error was.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The check printed its counts into the build's lines only, so a player
whose build ended with "4 damaged, 3 given a stand-in, 1 left as they
are" saw nothing of it. A job now reads romfs-check.json after the build:
the count goes into the step's row, and when the check ran in that job, a
sentence goes onto the home screen and into launcher.log.
The same four files are flagged on every copy of the game, and three of
them get a stand-in. For those the sentence says so and that nothing
needs doing; other files are counted and romfs-check.json is named.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
An exception make_game.py did not report itself only printed a traceback,
and the launcher showed "the build stopped (exit code 1)". main now sends
every such error through fail with the exception's message (the system's
text and the file for a file error, the full disk named as such), and the
traceback still goes to the log.
A dump whose data does not match its own checksums ended the RomFS step
that way. The step now names the damaged file and says to copy or dump
the game again, and it removes the partial image of a failed run.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The Updates row promised that an update rebuilds the game "in a few
minutes". The code cannot keep that: a version that changes the lifter
compiles the game's code again, and one that changes what the shaders are
built with builds all of them into the driver's cache again. Players'
updates took 24, 34 and 45 minutes. The row now says it takes a few
minutes when little changed and half an hour or more otherwise.
The warm-up of the driver's cache after an update only builds, but its
count was drawn in the second half of the bar as in a full preparation,
so a 20 minute run read 50 % in its first second. Its count now fills the
whole bar, and the row says so while the shader cache is packed before it.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A step that runs drops the record of every step after it, and the RomFS
step comes before the lift although the lift reads only the unpacked
ExeFS. An install that was cut short while the image was still being
packed, the lift beside it already done, therefore lifted the whole game
again at the next try. The RomFS step now leaves the lift's record; the
compile and the shaders, which read the image, still follow it.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
compile_all wrote the object cache only when every file was done, so
Cancel or a crash in the middle of the compile lost the record of every
object and the next run compiled the whole game again. The cache now goes
to disk every 25 objects, at most every two seconds, moved into place
whole. Results are taken as the compiles end instead of in the order they
started: the largest file starts first, and in that order nothing was
recorded until it had finished.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A RomFS step that was cut short (Cancel, a full disk, a power cut) leaves
romfs.bin.part, up to 26 GB. The next run writes the image anew, but
make_game.py's step_romfs and the launcher's Begin Installation measured
the free space first, with that file counted as used: on a nearly full
disk the retry was refused although it needs no more room than the first
try. Both remove the file before they measure, and the first-run screen
counts its size as free.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A player wrote that the settings file is overwritten on updates and that a line has to be added again each time. Nothing an update of the launcher's install does writes the file: the updater works in the launcher's own folders, and the build only reads it (the bind_ lines for the button prompts, shader_carry for the shaders step). The tests now hold that with the player's file as reported: settings the menu wrote, three lines that are no settings of the game, a comment, CRLF line ends and no line end after the last line. It comes through the launcher's part of an update (staging, the switch, the cleanup; BackgroundUpdateTest), through the rebuild under a newer kit, a rebuild with nothing to do and a build from the game files again (MakeGameTest, with the check, the ExeFS, RomFS, shaders and prompts steps real and the lift and compile as stand-ins), and through the launcher's own settings switch, which adds its one line (PlayerIniTest).
One writer did write the whole file again: installer/ini.py, the older installer's last step at every install and update. It kept every line, but turned CRLF into LF, added a line end after the last line and dropped a byte order mark, and a file saved as UTF-16 stopped the step with an error. It now changes the lang line only and keeps every other byte; a UTF-16 file is read as that and written as UTF-8, as the game's menu writes it.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
start.pyw showed the import failure in a message box before it ended with
code 86, and the stub waits six seconds for that code: unless the player
closed the box in time, the broken version stayed the current one. When
app/previous.txt names another complete release, the failure now goes to
crash.log only and the process ends at once, so the stub rolls back and
the previous version says on its home screen which version did not start.
The box stays when there is nothing to go back to, when Steam started the
launcher without the stub, and when the stub's wait is already over.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
An update whose lift ran again drops the compile step's record before the
compile runs, so a compile that then stopped left state.json without it,
build.built_version said '' and the launcher's next start showed the
first-run screen and asked for the dump. build.installed now also counts a
folder that holds the exe of the build before and game files a rebuild can
start from: the window opens on home, where Rebuild the Game reads "Not
Finished" and Play says which build it starts, and an update's rebuild and
the command line's go on with the game. Begin Installation into a folder
whose game files are already unpacked builds on from them instead of
reading the dump again.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A game that stops before its first save is the one its player most wants to report, and Export Save refused it: "the game has no save yet". With Add Log and Settings on (the default) the launcher now writes NX2navi-log-<date>_<time>-bug-report.zip with the game's latest log, nx2navi.ini and a manifest that counts no save files, and says so on the Saves screen. Without a log there is still nothing to export, an export without the log and settings still needs a save, no account is made for the export, and an import refuses such a zip as one without a save.
This is the first of the two faults pull request #364 names, written anew inside the existing export; its Export Diagnostics screen and its separate crash log are not taken.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The new row, Add to Steam (Windows), puts a non-Steam shortcut named "The Legend of Zelda Ocarina of Time" into the shortcuts.vdf of every Steam account that signed in on the PC (launcher/steam.py): the binary key-value file is read and written back as it was, with ours added or updated in place, and the file from before the first change kept beside it. Steam reads that file only at its start and writes it back when it closes, so a running Steam is asked to close (-shutdown) and started again after.
The pictures come from the player's game when the row is selected (launcher/gameart.py), as the launcher's fonts and sounds do: Navi from the HUD's icon and its glow, the logo with the Master Sword and the Hylian Shield from the title screen's texture archive (decoded with runtime/tex_astc.c, built into a library with the toolchain's clang), and a frame 12 seconds into the first title movie, the field under the full moon, decoded from its AV1 with the toolchain's dav1d.exe, as the background, the cover and the wide tile. They go into config/grid named by the shortcut's id, CRC-32 of Exe and AppName with the top bit set, which matches the id Steam gave an existing shortcut on the test PC.
Steam starts the launcher's pythonw.exe on data/steam_play.pyw, which runs the launcher of app/current.txt with the new --play: the game starts from its folder with its console hidden, as Play starts it, and the process waits for it and for the copies its own Restart starts, so Steam counts the game as running while it is. ocarina.exe is a console program, so starting it directly would open a console window beside the game, and NX2navi.exe ends six seconds after it started the launcher. Started that way on an RX 7900 XT PC, the game ran, the Python process stayed until the game was closed and ended with code 0. Tested against copies of that PC's Steam files; the real Steam library is not changed until the player selects the row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A player who keeps the game on a mapped network drive could not finish a build. Three things change in tools/make_game.py:
- The output folder keeps its drive letter on Windows. It was resolved to the share's UNC name, which is a second connection to the same server, and some servers drop that one under the compilers' load while the mapped drive stays up.
- When a source's size cannot be read because its folder stopped answering, the build says so and asks again for up to a minute before it stops with a message that names the drive. It used to end in a traceback. A file that is gone from a folder that answers still ends the build at once.
- A finished file is put in place through a temporary file beside it instead of a file in a temporary folder. Such a folder is made for its owner alone, and some shares refuse that while they take ordinary files; the build then reported a permissions fault in the output folder after everything had compiled.
From pull request #419: the first and third change are the contributor's, the wait is written again so that a file that is really gone does not wait a minute, and the launcher tests cover all three.
Co-Authored-By: Matthias <dev@sleepyyui.com>
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A player's AppImage build of 0.7.1 stopped in its compile step after eight minutes of RomFS work: four
files did not compile, because the kit builds with the system's compiler and headers and theirs were
older than the runtime needs. vk_pipeline.c and vk_device.c name VK_KHR_pipeline_binary,
VK_KHR_dynamic_rendering_local_read and VK_KHR_shader_maximal_reconvergence, which their Vulkan headers
did not declare, and ui/menu.cpp takes its font in with #embed, which clang has from version 19.
- Vulkan headers: tools/vulkan_pin.py holds the release the other builds use (1.4.363, the archive and
hash tools/make_release_linux.py already pinned, which now reads them from there). The AppImage carries
its C headers in toolchain/vulkan-headers and builds against them whatever the system has; a kit or a
source checkout uses the system's when they are at least that release and fetches the pinned ones
otherwise (build_game.py vulkan_include). Their folder goes first on the include path of the runtime's
sources only, so the lifted code's objects keep their keys, and a runtime object compiled before
against the system's headers is taken over instead of compiled again. AppRun no longer asks for the
system's Vulkan headers.
- #embed: tools/build_shaders.py also writes the font's bytes as runtime/ui/roboto_ttf.h (ignored by git,
carried by a kit), and menu.cpp includes that where the compiler has no __has_embed. With #embed
nothing changes.
- Before its long steps a Linux build that will compile now checks every runtime source that needs no
header of the install with the compile step's own command (clang -fsyntax-only) and links an empty
program against the game's libraries (make_game.py preflight): an old compiler, an old header or a
missing development package stops it in the first seconds with the compiler's own errors. A failed
compile names every file that failed, not only the three whose errors it prints.
Checked on Windows: tests/launcher_test.py passes with four new tests (117); the header of bytes and
#embed give the same 162,588 bytes, and both branches of menu.cpp compile; the early check passes on the
Windows file set with clang 23 and stops on files made to fail; the 34 local headers of release 363 are
the upstream tag's files by git blob id. Not run: anything on Linux, the pinned archive's download, a
compiler older than 23.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>