Commit Graph

120 Commits

Author SHA1 Message Date
chrg6
d0b15e4578 Merge the two performance changes into the 0.7.0 release line: a signalled event wakes only its own waiters, and a thread of its own writes the log.
One conflict, the list of setting names, which keeps both sides' additions.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 07:32:34 -05:00
chrg6
449b5f73b0 Merge the Linux pull requests into the 0.7.0 release line.
Eighteen commits, one per Linux pull request that was not in yet: the build fix for a source checkout, NVIDIA's shader
disk cache only with NVIDIA's driver, tools/run_game.py for a Linux game folder, a memory limit the low-memory handling
can read, the recording thread's core on Linux, shadow storage on Linux and Proton, the Steam Deck profile and prompts,
FSR 3.1 offered only where its library loads, DLSS frame generation through NGX on Linux, the AppImage with its window
and its workflow, and the processor level from /proc/cpuinfo. Two conflicts: the settings table keeps the area-load
settings under the new comment, and the example file keeps the lazy write-back as off by default and adds that it
stays off with shadow storage.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 07:31:55 -05:00
chrg6
a03e059d2b Write the log from a thread of its own, so a stalled write no longer holds the thread that logged.
Every log line was two writes on the thread that logged it, to stderr and to the log file. Such a write can stall for
tens or hundreds of milliseconds (a busy disk, a virus scanner, a console or a pipe that is slow to take it), and the
render thread logs too: a frame it spent in a write was a hitch with nothing else to show for it.

In a game run the lines now go into a queue that a log thread writes out in order (runtime/logq.c). A fatal error,
the crash report and the end of the process write the queue out on their own thread first and write their own lines
directly, so nothing is lost to an exit. A thread that finds the queue's lock held for long, or the queue full, writes
its line itself. NX2NAVI_LOG_ASYNC=0 writes every line where it is logged, as before.

Every write is timed in both modes: a "log: ... writes of the log took over 2 ms" line counts the slow ones, gives
the longest and says whose time they took.

tests/logq_check.py checks order and completeness with eight threads, a slow destination, a stopped destination with
the queue full, and the synchronous flush.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 07:22:41 -05:00
chrg6
c2a51a334a Merge GitHub main into the 0.7.0 release line: uniform blocks copied at the submit call with the replay on its own thread, the overlay's frame times measured where the pictures go out, and early pictures kept back.
The two commits main gained since the last merge. docs/releases/v0.6.2.md stays removed; the two notes they added to
it are in docs/releases/v0.7.0.md. Checked on a dev build of the merged tree: the settings, self-test, graphics ABI,
input and kernel probes pass, and a scripted run with six DLSS mode changes presents no dark or black frame, makes the
area's textures in one frame at the load and ends without a fatal error.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 07:17:01 -05:00
chrg6
094573bd26 Wake only the threads that wait for the event that was signalled.
A signalled kernel event, or a thread that ended, woke every thread blocked in WaitSynchronization. Each woken thread
takes a virtual core before it looks at its handles, asking a running thread of lower priority for its core when all
are held, finds nothing signalled and blocks again. The audio renderer signals its event 200 times a second, so every
thread that waits for a message, a timer or another thread's end did this 200 times a second at the cost of the
threads that were working.

A wait now records its handle list, and a signal wakes the waits that hold a handle of the signalled event or thread.
NX2NAVI_SYNC_WAKE_ALL=1 (or ab) wakes them all as before, and the sched line counts the waits woken and left asleep.

tests/sync_wake_check.py builds kernel.c with the rest of the runtime stubbed and checks the wakes, the timeouts, the
cancel and that none of 4,000 signals to eight looping waiters is lost, in both modes.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 07:15:30 -05:00
chrg6
9dbfed207f Turn the lazy write-back off by default and offer it in the settings menu as Experimental FPS boost.
With it on, single frames come out with the whole scene lit differently (brighter, shadows off). The flight recorder's
thumbnails of 1,800 presents standing in Hyrule Field show none with it off in every run, and with it on 43 to 181
while four other threads keep the CPU busy (10 to 97 in earlier runs, 0 on an idle machine); the cause is not found.
Two candidate fixes (arming only against a sync whose copies were handed over, and snapshots waiting for GPU writes in
flight) did not change the count, and fetching at every release made it far worse.

So wb_lazy is 0 unless set, on every platform (mem_init loses its special case), and the Screen tab has the row
Experimental FPS boost for it on Windows, with its text in the four menu languages; like every setting read at the
start it notes "after restart". The 0.7.0 notes describe it as experimental and off, say about 1.6 GiB for the video
memory a full shader cache no longer holds (2,484 to 846 MiB at the title screen in the measured run), and list the
two fixes before this one.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 07:12:23 -05:00
chrg6
71eb5fbe26 Make an area's textures at once after a load instead of over the first seconds, which showed the ground and walls black.
The texture pool creates 16 entries a refresh and stops after 6 ms a frame, so that textures streaming in do not make
long frames. An area load leaves thousands of slots at once (4,936 loading the test save), and at that rate they came
in over the frames after the load screen: the scene's first frames showed a quarter of the picture as black stand-ins,
for 22 presented frames on a free machine and for about three seconds with the CPU busy.

While a refresh leaves pool_load_backlog slots or more (512; 0 never), the pool is loading: the count limit is off, a
frame's refreshes may take pool_load_ms (50), and frame_hold leaves out the presents of frames drawn meanwhile (up to
2 s), so the picture before the load stays until fewer than 64 slots are left. Measured with the flight recorder's
thumbnails of every present: the 4,847 textures are made in one frame of 345 ms, 30 frames before the scene fades in,
and the black share of the picture goes from the fade straight to its final value. The streaming limits are as before
below the backlog.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 06:55:13 -05:00
chrg6
75b0dca907 Add Steam Deck button prompts beside the Xbox and PlayStation ones (prompts = steamdeck).
The Controls tab's Button prompts row and nx2navi.ini take steamdeck: the Deck's own labels in the game's
text, action prompt and ocarina notes, which are A B X Y where an Xbox pad has them, L1 R1 L2 R2 and L3 R3,
Menu and View. The style is drawn by tools/pad_prompts.py like the others, into romfs-patches-steamdeck
and romfs-patches-steamdeck-label, and every build with button art writes them.

Pull request #107 by loteran asked for PlayStation and Steam Deck prompts; it was closed, and the tree
took the PlayStation half in another form, drawn from button art instead of redrawn font glyphs. This is
the Steam Deck half in that form, written here: the art has no Deck style, so its entry in
tools/prompt_art.py names the Xbox pictures for the face buttons, Menu, View, the d-pad and the sticks
and the PlayStation pictures for the shoulders and stick clicks. It needs four pictures of the Xbox set
that no other style used (the white letters on a light button, for the ocarina's notes); a release made
with --prompt-art copies them with the rest.

The Windows files compile and tests/launcher_test.py passes, with the prompts step's test following the
number of folders (seven now); every picture the style names is in the art used for releases. The style
was not drawn here (that needs the game's font), and --probe-cfg, which has a new check, was not run.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 06:53:30 -05:00
chrg6
eb2608296b Generate frames with DLSS on Linux through NGX itself: 2x to 6x or dynamic, switched while the game runs.
DLSS Frame Generation went through Streamline, which only the Windows build has, so framegen = dlss did
nothing on Linux. There it now calls NGX's frame generation feature directly (vk_dlaa.c vk_ngxfg_*), with
the depth, motion vectors, jitter, camera and HUD-less picture the Streamline path gets. With it on, each
frame is composed into an image of its own instead of a swapchain image, the generated frames are made at
the end of the frame's command buffer, and a presenter thread shows them and then the rendered frame, each
copied into a swapchain image it acquires itself, spaced over the time between rendered frames
(gfx_present.c ng_*). fg_mult is the multiplier: 2 to 6, or dynamic for only the frames the display's
refresh rate needs. NVIDIA's libnvidia-ngx-dlssg.so.<version> goes beside the game; it is not in the
repository or any kit.

Pull request #124 by spidercraft. Its base was the present path of 0.5, so it is ported by hand:
- taken as written: the NGX calls and the presenter (the block is lifted from the pull request's diff);
- wired again into present_image, create_swapchain, the output rate and the HUD-less picture as they
  are now, with every new branch behind vk_ngxfg_wanted, which is 0 in the Windows build: the code is
  compiled there and never reached;
- added: frame generation's feature and parameters are released before NGX shuts down, the presenter's
  images, semaphores and command pool go when the device is released and are made again for a new one,
  and a failed submit on this path settles its fence without an acquire semaphore;
- the menu: the Frame generation row follows the setting at once on Linux and says "after restart" only
  when the game started without DLSS upscaling; the multiplier row lists what the GPU allows and Dynamic;
- the overlay row of the pull request it builds on (#123) is not part of this.
It touches vk_dlaa.c, which another session is changing: one field in N, the FG state after it, one FN
line, the instance extension query, the capability read in vk_dlaa_init, the release, and a block appended
at the end.

Known gap, as in the pull request: on this path fps_limit counts the frames the game draws. The Windows
files compile without new warnings; nothing was run, and the Linux path is not compiled here.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 06:45:59 -05:00
epicmeme546
a710c6193d Measure the overlay's frame times where the pictures go out, and keep an early picture back to seven eighths of the recent interval.
The overlay's rate, lows and graph were fed from the game's present calls. With the replay on the submitting thread, work held for an event is replayed with the next frame, so the calls come in uneven steps although each frame costs about the same: 36 and 9 ms apart in turn in a village, a sawtooth in the graph and a 1% low of 14 fps, while the pictures went out 19.7 ms apart on average and changed by 3.9 ms from one to the next. The present thread now reports each picture (perfmon_shown) and the overlay takes its intervals from that; the game's calls are used only where no present thread reports.

A picture that arrives early now waits until seven eighths of the recent interval have passed since the one before (vk_backend.c pace_smooth, NX2NAVI_PACE_SMOOTH, on by default; not with frame generation). In that village the change from one picture to the next went from 3.9 to 3.0 ms at 51 fps both ways, in a graveyard from 3.1 to 2.6 ms at 54.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 06:35:28 -05:00
chrg6
5b6dc0cfa0 Give the Steam Deck profile four virtual cores, BC3 for ASTC textures and a shorter spin hand-off.
On a Steam Deck the settings the player has not set now also default to cores = 4 (the game's six virtual
cores share the Deck's four physical ones), astc_bc = 1 and spin_handoff_us = 30. Like the profile's other
values they are starting points that no Deck measurement stands behind yet.

Pull request #404 by PlayerJV55 (closed on GitHub, no description). Taken: the three profile values, with
the profile's comment and nx2navi.ini.example brought up to them. Not taken, each for a reason:
- play.sh exporting the same values on a Deck: the game finds the Deck itself and applies the profile;
- folding the virtual cores onto the physical ones on every machine with fewer than six cores: that
  changes the default on Windows PCs too, and nothing was measured;
- keeping one unwritten page inside a run of written pages in the shadow copy-in (vk_memory.c): the
  extra page is copied from guest memory over what a shader may have stored there through the device
  address table, which never comes back to guest memory, for a gain nobody measured;
- the release workflow: it publishes a release, not a draft, and puts an empty file in the translator's
  place when its build fails. The workflow of pull request #273 builds the same AppImage and refuses to
  attach a broken one.

cfg.c compiles; nothing was run, and there is no Steam Deck here.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 06:32:37 -05:00
chrg6
4d12238e69 Let a shadow write-back clear the write watch's protection of its range in one call on Linux (shadow_bulk_write = 1).
On Linux the write watch protects pages, so a write-back from shadow storage into guest memory took a fault
at the first store into every page. plat_mem_prepare_write clears the protection of a range with one
UFFDIO_WRITEPROTECT call; the pages count as written, as they would after the faults. Off by default;
Windows has nothing to clear.

Pull request #327 by theurbanninja1993-sketch (a draft on GitHub). The platform function and its Linux
test are taken as they are. The call moved: the write-back it was written for is now shadow_write_back in
runtime/vk_memory.c (a file other sessions are changing), where it covers the runs of pages a submission
changed, and the setting is registered in cfg.c and described in nx2navi.ini.example, which also says
that the lazy write-back stays off with shadow storage.

The Windows files compile; the Linux code and its test are not compiled or run here.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 06:31:27 -05:00
chrg6
df2427d00a Check that a part's CPU inputs reach the GPU ahead of its own noted writes, and let a frame dump pick shaders and keep raw texels.
This pull request fixed lighting that added up frame after frame under shadow storage on Linux: a GPU write
noted while a part was recorded kept that part's CPU inputs (the game's resets of its lighting accumulators)
out of the shadow. Its fix marked noted ranges as submitted in vk_memory.c; the base copies that came with
the black-world fix already move every CPU-changed byte in before the part runs, so that part is not taken
and no SHADOW_PENDING_INPUTS setting is added. Taken from it:
- tex_probe.c (--probe-vkmem): a range noted as a future GPU write still gets the CPU's bytes before the
  GPU reads it. The pull request's other check, that a CPU write made after a GPU result loses to it until
  the write-back, is left out: with base copies the later CPU write wins, as it does on the console.
- vk_dump.c: NX2NAVI_DUMP_SHADERS=<hash>,... copies images only for passes that use those shaders, and
  NX2NAVI_DUMP_RAW=1 also saves each copied image's texel bytes.
- tools/fix_linux_ambient_power.py, as it is: patches one translated shader of a player's own cache so a
  zero exponent no longer gives NaN. It holds two hashes and no shader data.

Pull request #264 by intellq. The Windows files compile; the probe was not run, and nothing was run on
Linux here.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 06:24:56 -05:00
chrg6
f97358ddc4 Give the recording thread a fast core and its sibling on Linux, and pick the thread that does the recording.
On Linux recorder_core reserved the last logical processor of the mask (an efficiency core on a hybrid
CPU) without its sibling, for the first thread to call vk_exec_record, and the first process-wide affinity
call took it back. plat_cpu_reserve there now takes the fast core that clocks highest with both of its
logical processors (none when fewer than four cores are fast), threads the holder starts get the other
processors, plat_process_affinity leaves the core with its holder, and a sweep every 300 presents moves
threads that inherited the core and gives it back once the holder has ended.

Shared code, so Windows changes too: the priority and the core go to the first thread that has spent half
a second in vk_exec_record (vk_exec.c rec_claim) instead of the first to call it, and the log names the
logical processors.

Pull request #358 by mooki000, taken as it is. The Windows files compile; nothing was run, and the Linux
code is not compiled here.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 06:20:40 -05:00
chrg6
9ecfdf1543 Merge GitHub main into the 0.7.0 release line: frames that lack draws are held back, and the overlay shows the game's own video memory.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 05:37:45 -05:00
epicmeme546
d1bebd34cd Keep the previous picture on screen instead of showing a frame that lacks draws, and show the game's own VRAM in the overlay.
A draw whose shader or pipeline is still building is left out of its frame, and the frame was shown without it: a black or unlit picture with the interface intact when it was a lighting pass, a light going out, or ground missing for a frame. In a player's session a full-screen draw was skipped after its 50 ms and the frame came out black as a boulder hit.

The frame's present is now left out when draws were skipped (vk_backend.c frame_hold, NX2NAVI_FRAME_HOLD_MS, 120 by default, 0 off). The game runs on, so nothing waits. The hold comes from an allowance that fills again at an eighth of the clock's rate, so a long build or a run of them shows its frames as before and does not freeze the picture; a full-screen draw that would be skipped with the allowance spent waits on instead, 500 ms at most. Not with DLSS Frame Generation.

On a first walk through a village with no pipeline recorded, 21 of the 23 frames with skipped draws were held back; in the Lost Woods, 7 of 8.

The performance overlay: the VRAM line is the card's dedicated memory in use, which counts every program on it: a player read 14.5 GB as the game's while the game held 7.3 GB. The line's third cell now gives what this process holds on the device-local heaps (the driver's budget figure), in place of the GPU clock, which stays where the driver gives no budget.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 04:39:19 -05:00
chrg6
17c13e49ff Copy what shaders write into the game's memory back only when the CPU touches it, which takes Hyrule Field from 51 to 71 fps.
Standing in Hyrule Field the GPU spent 13 ms a frame, of which 2.4 ms were the game's passes and 7 to 9 ms the copy
of 66 MiB of shader-written buffers back into guest memory at the end of every submission, in case the CPU reads
them. The write-back probe found no CPU access to them in 40 s. Now a range goes back once and its pages are made
inaccessible; while they stay so, later writes stay in the mirror. The first CPU access faults, the bytes are fetched
with a GPU copy of their own after everything submitted so far, the pages are given back, and the range is written
back every submission again for a while (1 s, doubling to 32 s while it keeps being touched). Thaws before kernel
reads and writes and before mapping changes release armed ranges the same way, and so does a mirror that goes away.

Dev build, same spot, 80 s each: 51.5 to 71.0 fps median, 1% low 43.5 to 56.3, GPU time 13.1 to 7.5 ms a frame,
fence waits 9.8 to 4.4 ms. In that run the game faulted on armed pages 226 times and 124 fetches took 51 ms in all;
a walk into a fight made 283 faults and 186 fetches, and a test that touches eight armed ranges every 60 frames
(wb_lazy_touch) 480 faults and 364 fetches, none with a fault of its own. wb_lazy = 0 is the old behaviour.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 04:36:46 -05:00
chrg6
61a13c62b9 Keep only the compute pipelines of recently dispatched shaders from the boot, and build the others into the pipeline cache without keeping them.
The boot prebuild built the pipeline of every compute shader play ever recorded and kept all of them for the process. A pipeline that exists holds driver memory whether or not anything dispatches it: with a history of 4,066 compute shaders they held 2.3 GiB of device memory, and its share of the process's commit, from the title screen on (RTX 5090, NVIDIA 621.01), while a boot into the first village dispatched 95 of them.

The boot now keeps the pipelines of the 512 compute shaders dispatched most recently (compute-used.bin next to pipeline-keys.bin records which run last dispatched each; the setting is compute_keep, with "all" for the earlier behaviour). Every other one is still built at boot, so that the pipeline cache holds it after an update or a driver update, but destroyed at once, and created from the cache at its first dispatch. A dispatch that comes while such a build runs gets that build's pipeline.

Each boot stage now logs the device memory and the process commit it leaves ("mem: boot stage"), and the log says what the first dispatches cost. nx2navi.exe --probe-prewarm runs these stages without the game from the caches next to the executable and times first dispatches of pipelines the boot did not keep: 256 of them took 0.19 ms on average and 3 ms at most, all read from the pipeline cache file, and 372 pipelines built and destroyed at boot left the device memory where it was.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 16a796d623686bca5304eaf1b29981247453a413)
2026-11-10 03:34:03 -05:00
chrg6
fa29f3fea5 Merge the second PR intake pass: anisotropic filtering in the Screen tab, the X3D die choice, the NVIDIA shader cache limit, the NGX core search and other fixes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 03:32:46 -05:00
chrg6
417fbcf5ff Merge the memory report branch: the device address table gives empty blocks back, and textures give way before VRAM mirrors are refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 03:32:30 -05:00
chrg6
2a9efee4c5 Merge GitHub main into the test line: the launcher's customisation, the settings and sound changes, and the warm stage-library cache.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 03:32:30 -05:00
chrg6
74d3412736 Release the DLSS features that stayed before one is made after a release, so the pause screen no longer comes out striped.
A pause of 3,600 frames frees the gameplay feature; the unpause makes it again, and the pause screen's feature, which
had stayed, drew alternating bands of rows black or noise at every later pause. A scripted pause, unpause, pause was
striped in each of the 8 runs in which the gameplay feature had been freed and in none of the 12 in which it had not;
setting the kept feature's sizes at each evaluation, tried first, changed nothing. Features made one after the other
with no release in between are fine, so that is now the only way one is made. dlss_idle_free = 0 keeps every feature
instead, 2 is the old behaviour.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 03:30:31 -05:00
chrg6
1cf947fe4b Release the DLSS features that stayed before one is made after a release, so the pause screen no longer comes out striped.
A pause of 3,600 frames frees the gameplay feature; the unpause makes it again, and the pause screen's feature, which
had stayed, drew alternating bands of rows black or noise at every later pause. A scripted pause, unpause, pause on
0.6.1.22 and 0.6.1.23 was striped in each of the 8 runs in which the gameplay feature had been freed and in none of the
12 in which it had not; setting the kept feature's sizes at each evaluation (the commit reverted before this one)
changed nothing. Features made one after the other with no release in between are fine, so that is now the only way
one is made. dlss_idle_free = 0 keeps every feature instead, 2 is the old behaviour.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 16acd83397d0b59904fd4c0bd96cea8285bc0a6f)
2026-11-10 03:00:33 -05:00
chrg6
7bc7f63a7d Let textures give way before VRAM mirrors are refused, and under commit pressure whatever the released list holds.
Three faults a tester's 39 minute session showed (a 24 GB card, 32 GB of memory, a 64 GB commit limit), each still in the code:

A pool gets no VRAM mirror past seven eighths of the budget, and textures only gave way above 90%, so at 88% mirrors of 0.4 MiB were refused and the game ran at 11 to 20 fps while the textures of areas left long before stayed. The default of tex_vram_pressure is now 80. A refused mirror's request for room also stands until the use is down to where the mirror fits, for up to 64 checks, instead of buying the 64 textures of the one check that read it.

While the commit was low, live textures went only once the released entries were down to 256 MiB. Where the game releases and takes back 200 to 300 textures a frame the released entries held 1.4 to 2.0 GiB, none stale, so nothing went at all. Live textures now go as soon as the released entries have no full step of stale ones left; the entries the game takes back stay, as before.

The commit counted as low only by the system's figure, which depends on the page file: 59 GB in use of 64, with this process at 42 GB. tex_proc_commit_mb adds a bound on the process's own commit (default the installed memory, at least 24576 MB; 0 turns it off), with a line in the log when it starts and stops holding.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 02:25:14 -05:00
ordinarybob
662a6e88ee Run the game on the die with the larger L3 cache on processors whose dies differ (AMD's two-die X3D processors).
Windows places a game on the V-Cache die only when it recognizes the exe as a game, and it does not know this one, so the threads were spread over both dies by frequency preference. cache_die = 1 (the default) narrows the process to the logical processors that share the largest L3; it never widens the set the process was given, and does nothing where every L3 has the same size. The recorder's reserved core is then chosen inside that set.

Co-Authored-By: Claude Fable 5.2 <[EMAIL]>
2026-11-10 02:01:35 -05:00
Michael Schienbein
03cb703e8f Apply anisotropic filtering while the game runs, and add it to the Screen tab.
NX2NAVI_ANISO was read once, when the first sampler was made (vk_texture.c sampler_features), and make_sampler raised the level of the surface textures' samplers as it created them. Samplers are looked up by the game's parameters and live until shutdown, so a new level could only reach them after a restart, and the setting had no row in the menu.

The decision which samplers get the level moves from make_sampler into aniso_raised, and sampler_for puts the raised level into the sampler key, as it does with the DLSS texture bias. vk_sampler_aniso_live reads the setting again after a settings change, at each present beside vk_dlaa_frame's bias; on a new level it clears the slots' samplers and bumps the sampler generation, as vk_sampler_dlss_bias does, so the slots and the descriptor caches take samplers of the new level from the next draw. The old level's samplers stay until shutdown like every sampler. The setting is marked live in cfg.c, and the Screen tab gets a Texture filtering row (Game, 2x, 4x, 8x, 16x) with the description the catalog already had.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 01:56:30 -05:00
ordinarybob
834d9e2d20 Take a submission's write-watch snapshots ahead for the pools the submission at its place in the last frame synced.
The pre-snap of a submission took the pools the submission before it had synced. In Ocarina those are another submission's pools: the frame's first and fourth submissions use no pool and queried the pools of the ones before them, and the submissions after them then queried their own pools one at a time at first use. The pools are now remembered by the submission's place in its frame.

NX2NAVI_PRESNAP_PLACE=0 gives the old choice back and =ab switches it in the B blocks.

Co-Authored-By: Claude Fable 5.2 <[EMAIL]>
2026-11-10 01:55:31 -05:00
epicmeme546
e10ef60fd5 Keep the driver's cache of stage libraries warm, link a missing pipeline instead of skipping its draw, and count the texture cache's waits in time.
The preparation builds every stage library once so the driver's disk cache holds it and a library a draw needs later takes under a millisecond. Turning dynamic vertex input off for AMD's RDNA 3 and newer driver changed the dynamic states every library lists, which gave each one another entry in the driver's cache, and nothing built them again: an update carried the prepared shaders over without the driver step. On an RX 7900 XT (26.10.1) all 42,142 prepared libraries were cold, 93 ms a vertex and 242 ms a fragment library on average. With no pipeline recorded, a walk through a village skipped 11,180 draws while their pipelines built and made 94 draws wait 5.5 s in all, four of them 1.0 to 2.0 s; a player's session log shows up to 114,834 draws skipped in 600 frames and 181 waits of 251 ms on average. Skipped ground and walls appear and disappear, and a skipped lighting pass is a black frame with the interface intact.

- The game checks the driver's cache at every start (vk_pipeline.c lw_start): a sample of the prepared fragment libraries is built, and when their median time says the cache is cold the whole prepared list is built into it again on idle-priority threads while the game runs. shader-warm.txt records a warm in progress, so the next start goes on with one a run ended, and stops the tries on a driver that does not keep the libraries. This also covers a driver update and a cache the driver emptied.
- An update that carries the prepared shaders over runs the game's --warm-shaders (tools/make_game.py warm_driver_cache): 11 s with the libraries there, about 8 minutes with all of them cold on that card.
- A draw whose pipeline is missing waits for its fast link from a budget of 6 ms a presented frame, 3 ms at most each (NX2NAVI_PIPE_LINK_MS), before it is skipped: with warm libraries the link is done within that.
- Full-screen draws wait from their 50 ms budget again instead of being skipped (NX2NAVI_PIPE_SKIP = any is the default; fullscreen stays selectable). With warm libraries the wait is a millisecond.

The same walk afterwards: libraries 0.3 and 0.7 ms on average, 1,605 draws skipped, 1,473 of them in the scene's first 600 frames and 8 to 80 in each 600 after, and 19 waits of 60 ms in all. First visits to four other saves (a mountain pass, the Lost Woods, Kokiri Forest, a river) waited 12 to 84 ms in all except the Lost Woods, where mesh shader pipelines, which have no stage libraries, and vertex libraries that need added outputs still compiled once: 23 waits, 2.1 s in all, the longest 776 ms.

The texture cache counted its waits in presents chosen at 60 a second: at 165 presents a second the 1800 that stood for thirty seconds were 11 s, so a released render target went sooner than meant and a texture out of view for 11 s was retired and showed its stand-in for some frames when it came back. The counts are now taken times the present rate over 60 (presents_for), and a texture is retired after two minutes without a sample instead of thirty seconds.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 01:36:29 -05:00
epicmeme546
41eb0e635b Apply the camera's stick sensitivity and the speaker layout during a run.
NX2NAVI_STICK_SENS was served to the game as a multiplied camera pack at start only. A change during the run is now written into the game's memory: the StickSensitivity array as the game holds it, at the factor in effect, is looked for in the guest's heap and every copy is overwritten at the new factor. The game reads the array each time it steps the camera, so the speed follows at once. The copies found are remembered, so a later step of the menu's slider takes no search, and a search runs again a moment after the game opens the pack anew. On Ocarina 1.1.1 the first change of a run found 4 copies in about 2 s on its own thread, and the same stick push for a third of a second turned the camera about 30 degrees at 1, 90 at 3, 10 at 0.3 and 30 again at 1, all in one run.

NX2NAVI_AUDIO_CHANNELS was decided once. A change that gives another channel count now signals the device change events the game holds, as a console does when its output moves: the game asks GetActiveChannelCount again and mixes for the new count, and the mixer makes its SDL stream again with that count at its next render. On Ocarina 1.1.1 the centre input of the device sink went from 0.0006 rms to 0.013 within the 5 s after stereo became 5.1 and back to 0.0006 after stereo was set again, with no underrun. NX2NAVI_TRACE=audio logs the six inputs' levels with its level line.

Both rows lose their "after restart" note. The graphics card, widescreen, the resolution, the game's language, the button prompts and the game's native HDR still take a restart: the game or the Vulkan device reads them once while starting.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 00:21:31 -05:00
chrg6
a3e681f4e5 Merge the performance pass's texture generation and write-back changes into the test line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 23:43:10 -05:00
chrg6
9728424aec End the wait after a frame's first submission when its passes are through, not its write-backs.
Every frame the render thread waited about 5 ms for the GPU after the frame's first submission, with the game
CPU-bound in every area. The wait is there so that the GPU has run that submission's passes before the game
rewrites what they read. But the submission also ends with the write-backs of what its shaders wrote, 60 MiB merged
into guest memory in 3 to 4 ms of GPU time, and the wait covered those too.
The write-backs now go into a part of their own. The part before them signals a second timeline, the executed
timeline, and the first-submission wait waits on that; the write-back part signals the timeline as before, so every
fence the game asks for still covers them, in the same queue order. wb_split = 0 keeps one part and the old wait.
Not measured in the game yet.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 23:42:12 -05:00
epicmeme546
9ae7764ab5 Change a setting with the mouse only on the two framed arrows beside its value, and switch HDR without a restart.
In the settings menu a click anywhere on a row stepped its setting to the next value, and the left arrow stood left of the value's text, so it moved whenever a value of another width came up: clicking the left arrow through a list landed on the row at the second click and stepped the other way. Each stepper now has its arrows in white frames at fixed places, the left one the width of the row's widest value from the right one, and the mouse changes the value on those frames only; a click on the rest of the row selects it. On and off rows have the same arrows. An arrow at the end of its values is drawn faint and does nothing, and a button held on an arrow repeats as a held key does. A, Enter and left and right work as before.

NX2NAVI_MENU_TEST_CLICK clicks rows by their setting's name during a menu test run. On an RX 7900 XT at 3232x1352 the arrows stepped the performance overlay one value a click and stopped at both ends, and clicks on the body of four rows changed nothing.

HDR between off and the tone mapper now follows the menu. The HDR path is set up at every start (vk_hdr_armed): the swapchain colour space and metadata extensions, the tonemap splice and the settings in the support buffer, with the spliced tonemap returning the game's own SDR result while the swapchain is SDR. A change of the setting makes the swapchain again in the other format. On the same card a run that started with HDR off went to an HDR10 swapchain and back, and one that started with HDR on went to SDR and back, with the picture right in each state. The game's native HDR still waits for a restart, as the game asks about the display once, and the row says so. NX2NAVI_HDR_LIVE = 0 leaves the HDR path out of a run that starts with HDR off.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 23:27:02 -05:00
chrg6
4cbdecb64b Round the physics solver's step count up above 60 fps and give Ocarina a steady step.
Above 60 fps players fell off moving platforms. The physics system takes its solver step count for a frame as
trunc(frames per update * 4 + 0.001): 4 at 60 fps and 8 at 30, the rates the game ships with, but 3 from 61 to 80
fps, 2 to 120, 1 to 240 (144 solver steps a second at 144 fps against 240 at 60), and 0 in a frame shorter than a
quarter of a 60 Hz frame. The solver skips its whole solve and sub-integration loop at 0, so such a frame resolves no
contact or friction and moves no rigid body. At a 240 fps limit, which "unlimited" paces at too, that was the frame
after every late one: the pacer keeps its phase, so the next display interval is shorter than the period.
The new patch set osolver rounds the count up, ceil(frames per update * 4 - 0.25): 4 and 8 as before, never fewer
steps a second than at 60 fps, at least 1. physics_steps = 0 gives the game's own count.

The step itself was the mean of the last five display intervals and changed with every frame: intervals of 5 and 30
ms in turn gave steps of 15 and 20 ms in turn, and one 60 ms frame at 200 fps took the step from 5 to 16 ms for five
frames. The game never saw a changing step on the console. The step is now the mean of the last 12 intervals without
the longest and the shortest, is the pacer's period when within 3% of it (at a 60 fps limit exactly one frame, every
frame), and repays the time the game was not given at up to a tenth of the step, so game time still follows the
clock. It is at least 1/480 s. step_steady = 0 gives the mean of five again. With trace = perf the fps lines show the
shortest and longest step and the time owed.

tests/frame_step_check.py drives frame_rate.c with made-up display times and the rest of the runtime stubbed.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 22:54:46 -05:00
chrg6
947d286b40 Leave the texture table's slots alone when a texture is released and taken straight back.
In a large town the game releases and takes back about 40,000 textures per 3,600 submissions. Each was a bump of
its address bucket, the fullest buckets (1,300 slots over one address) were bumped most, and the texture pool
refresh refilled about 6,000 slots per submission: it used up its 6 ms of a frame in about half the frames there,
which made the game CPU-bound (the GPU idle 10 ms a frame) and delayed new textures.
A take-back of the entry that was released, with no other change at its address since, now puts the bucket's
generation back to its value from before the release, so everything resolved then is current again. A bump takes
the generation after the highest the bucket ever had, so the value in between is never given to another state.
tex_gen_undo = 0 bumps as before. The pool line counts the take-backs that went back.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 22:23:00 -05:00
chrg6
00f06e669e Fix nine runtime faults a tester's report named: a stack overrun on mesh draws, lost YMM halves on preemption, and seven more.
- The mesh stage's storage table starts 0x90 bytes before the end of the 2 KiB constant bank, and all sixteen slots
  were written: 0x6C bytes past a stack buffer on every mesh draw. It holds the nine slots that fit.
- The prebuilt runtime is compiled without AVX, so its preemption stub saved only XMM0-15 while the lifted code of
  an AVX2 processor keeps data in the upper YMM halves, which the stub's callees may clear. Both bodies are built
  now and the one for the processor is chosen at the start.
- After an FSR 3.1 frame generation error the window's swapchain was still AMD's object but went to the plain Vulkan
  calls. Swapchain calls follow whose swapchain it is, and a failure takes it down as a switch in the menu does.
- A movie is paced at its own 60 fps under a lower limit too: at 40 fps it ended 25 s behind its sound.
- A lost device left the wait for an upload spinning for good; it ends the run with the device's report.
- The compute pipeline key had four bytes of padding that were hashed and compared, so a prebuilt pipeline could be
  missed and built again.
- A thread's TLS pointer was published before the TLS was allocated, so the slot was always 0.
- A fatal exit puts RivaTuner Statistics Server's profile back, and an ini saved as UTF-16 is read.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 21:54:40 -05:00
chrg6
a87f6e1bd6 Merge the test line's texture retirement fix into the combined branch.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 21:27:08 -05:00
chrg6
22103a57bf Merge main into the test line: the pull requests taken there and two render target fixes.
Main brought the fixes of eleven pull requests (the texture pool set sealed when an early replay part is submitted, every location reflected in interface arrays, RGB9E5 texels recognised for integer storage views, the upscaler a frame started with kept, GPU pass timestamps without vendor breadcrumbs, the Linux build, window and NGX fixes), render targets released when drawn over at another address, the vertex layout kept in the pipeline on newer AMD drivers, and the upscaler choice read once per evaluation.

Four hunks conflicted and take both sides: pool_sync returns for a sealed set before the per-frame creation budget's clock (vk_exec_draw.c); make_module keeps the test line's early_ok argument and main's module hash (vk_pipeline.c); a texture taken back counts as sampled again and records how long it was away, and the texture line logs the disuse counters and the overwritten render targets (vk_texture.c).

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 21:10:23 -05:00
chrg6
f1127f8be9 Retire textures evicted by disuse before freeing them, take them back on any use, and add tex_disuse = 2 to tell the freeing from the marks.
0.6.1.14 faulted the GPU (a read of an invalid address in a pass) about 30 seconds after its last disuse evictions, and
no path by which an evicted image is still read was found in the code. An evicted texture is now first retired: the
pool refresh gives its slots the stand-in while the image stays whole. It is destroyed only once the texture pool has
taken every set of its ring since and the GPU has finished the submissions recorded until then, so no pool set can
still be bound with its view. A mark on one of its slots or any lookup outside the pool refresh takes it back as it is,
and the perf line counts those, which shows whether the marks miss a real use. tex_disuse = 2 retires and never frees,
so the next fault can be put on the freeing or on the marks and stand-ins.

The registration shortcut also read a slot's cached entry without checking that the resolution was current, so it could
read the record of a destroyed texture; it now checks the slot's generation first.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 4c5b2ae2e030ab00a910d8f071c030e610fd78e1)
2026-11-09 21:09:33 -05:00
chrg6
57cdfa1520 Add wb_probe = 1, which finds out who reads what the GPU wrote back into guest memory.
Per-pass GPU timestamps put the write-back of GPU-written storage buffers at 3.6 to 5.3 ms of GPU time a frame in play, against 1.8 to 2.5 ms for all of the game's own passes and dispatches: about 67 MiB a frame goes from the mirrors back into guest memory, from the same eleven pools all session, in case the CPU or a host path reads it. Nothing said whether anything does.

With wb_probe = 1 the 2 MiB regions that lie wholly inside a range just written back are made inaccessible. The first read or write of such a region faults; the handler gives the region back the protection it had (read-only when frozen, else read-write), notes the address, the instruction and the thread, and the access runs again. The bytes are in guest memory all along, so nothing changes for the game. A log block every perf window gives the regions armed, the probes a read or a write ended, and the first accesses by instruction. Every thaw ends the probe of its region first, which covers file reads into guest memory and mapping changes; a file write from guest memory thaws its buffer while the probe is on; a probed region is not frozen anew.

The platform layer gets a hook for every read or write access fault beside the write-fault hook; it is installed only with the setting. --probe-gfx-abi checks that nothing is armed without it and, run with NX2NAVI_WB_PROBE=1, that reads and writes end a probe and run again, that a frozen region thaws after it and that mem_thaw ends and holds.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 21:01:47 -05:00
Michael Schienbein
a103673341 Make the SDL window honour monitor, --monitor and --list-monitors.
On Linux the window ignored NX2NAVI_MONITOR (the log said it had no effect) and --list-monitors only printed that monitor selection is Win32-only. The SDL window now picks a monitor with the same rules as the Win32 one: auto (the system places it), primary, a 1-based index in listing order, or part of the monitor's name, ignoring case, the first match in list order winning. The monitors are SDL's displays; --list-monitors prints their index, name (the make and model, with the connector on Wayland and X11), pixel size and position, primary flag and display scale, then what NX2NAVI_MONITOR would pick, and the log says the same when the window opens.

The window is created centred on the chosen monitor and centred again at its final size, and that position also names the display the fullscreen setting covers, which is how a Wayland window, which a client cannot move, opens fullscreen on the chosen output. On Wayland a windowed window opens where the compositor puts it; the log says so once. With a chosen monitor, the size widescreen.c reads for fullscreen before the window exists is that monitor's.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-09 20:51:09 -05:00
chrg6
8e656b85a4 Hold less video memory in empty space: smaller VMA blocks, spare blocks only where textures grow, a smaller ASTC scratch, and DLSS features freed once unused, with a VRAM breakdown in the perf log.
VMA's blocks on large heaps are 64 MiB instead of 256 (vma_block_mb): one session held 2.1 GiB free inside the
device blocks beside 8.2 GiB of allocations after a few area changes, and the driver counts a block whole until it
empties. The headroom thread keeps its spare block only for the device-local types textures and mirrors grow in; the
spare blocks it made for the host types and the PCIe BAR type at boot stayed empty for the whole run. The ASTC
decoder's scratch is 32 MiB, so it stays inside a block, and an area load that makes one per upload batch holds half
as much at once. A DLSS feature no frame used for 3600 evaluations is freed with its work images, and a model change
now frees all five sizes.

The perf log gets a "vram by use" line (textures, released textures, mirrors, physical pools, ASTC scratch, headroom
spare, free space inside the blocks, memory outside VMA and DLSS's own share), the free ranges per memory type, the
addresses whose duplicate texture entries hold the most, and a line when memory outside VMA moves by 256 MiB.
astc_bc_probe in nx2navi.ini turns on the ASTC opacity probe.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 99cfc2fa14ae208b7b23e057ff9b87986cd6a5e0)
2026-11-09 14:56:17 -05:00
chrg6
860bc9cf0b Spread the texture pool's entry creation over frames by a per-frame time budget, and stop looking up the slots it left.
The pool refresh runs before every draw that binds the pools, so its count budget of 16 creations held per draw, not
per submission. An area load in the 0.6.1.12 test made 4,925 entries (1.7 GB of uploads) in one 430 ms frame, and
2,018 in a 195 ms one. While slots were left over, every draw walked the whole table and looked each of them up again,
about 100 ms of the 430 ms frame in key hashing alone.

Once a frame's refreshes have taken pool_create_ms (default 6 ms; 0: no limit), they create nothing more until the next
frame, and skip the slots left earlier in the frame. The first refresh of each frame keeps its count budget. The slots
left keep their stand-in for a few frames during a large load.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 14:51:29 -05:00
chrg6
dc9f164afc Evict textures no shader sampled for 30 seconds while video memory or the system's commit runs low.
The texture pool refresh looks up every registered slot, so the textures of every area the game keeps loaded never
counted as idle and their memory only grew. Marked shaders now store into a buffer with one word per pool slot. Every
four submissions that recorded work, the replay copies it out and clears it, and the texture side notes when each
texture was last sampled. Under VRAM pressure or low commit, once idle textures are gone, live textures that come back
intact and were not sampled for 1800 presents go too. Their keys are held, so the pool refresh keeps the stand-in until
a shader samples that slot again, and the next refresh makes the texture again.

Fragment shaders that neither discard nor write depth, sample mask, stencil reference or memory keep early depth tests
(EarlyFragmentTests), so the marks do not take away early depth rejection. Alpha to coverage leaves the dynamic state
while marks are on, so each pipeline knows whether early tests are safe. Disuse eviction waits until every module that
indexes the pool was marked and two reads arrived. NX2NAVI_TEX_DISUSE=0 (tex_disuse = 0) turns it off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 1a4c896150a748f9275c3024e96af3055db94af4)
2026-11-09 14:39:07 -05:00
chrg6
a720ca879c Let NX2NAVI_GPA_TWIN_MAX_KB keep the device address table's second writes to small pools, to measure what the twins cost.
A shader's store or atomic through the table goes to a pool's VRAM mirror and again to its guest copy, which on a
discrete GPU crosses PCIe. On PCIe 3.0 (RTX 4090, Kokiri Forest, DLSS Quality) turning the twins off took the GPU from
16 to 13.1 ms a frame; the writes that went wrong without them were foliage counts and records in pools of 20 and
44 KiB. gpa_twin_max_kb = n gives a twin only to mirrors of pools up to n KiB. A larger mirror's record names the mirror
twice, so its second write goes to the table's scratch page, its buffer fills stay in VRAM (vk_mem_guest_twin), and it
is never evicted, since guest memory lacks what the shaders wrote into it. The mirror report counts the mirrors made
without a twin. Default 0: every mirror has one, as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 12:45:26 -05:00
epicmeme546
fb3764c599 Hold the scene at 75% of the picture when no temporal upscaler is running.
Without DLSS or FSR 3.1 the game's dynamic resolution took the scene down to a third of the picture under load, and a plain scale showed every step of that. NX2NAVI_SCENE_SHARE sets the share, and 0 leaves the game's dynamic resolution on.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 12:45:14 -05:00
epicmeme546
5cb85adb45 Stop the fog leaving dark trails behind nearby objects.
The fog's first compute pass skips froxels behind a coarse depth table from the previous frame and writes them as empty, so the columns a near object had just left came out with no fog, and the fog's history smeared that into a trail, worst at the screen edges. The comparison is now never true, so those froxels are computed. The shader is found by its shape, so this holds across translator updates. NX2NAVI_FOG_CULL=1 keeps the game's skip.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 12:45:14 -05:00
chrg6
c745a9ef2f Offer DLSS multi frame generation at 2x, 3x and 4x.
framegen_multiplier (2, 3 or 4, live) sets how many frames the display gets per rendered frame while NVIDIA DLSS frame generation runs, and a DLSS multiplier row under Frame generation in the Screen tab sets it. nx2navi_dlssg.dll now passes that count to Streamline and reports the GPU's limit (numFramesToGenerateMax) through a new optional export, nx2sl_frames_max; with an older DLL the game keeps to 2x. A value above the limit is clamped to it with a log line, and the menu lists only what the GPU and driver allow, with a note saying why the rest are missing. The Frame generation row now says "in use: off" and why when DLSS frame generation was set but does not run.

The pacer divides the frame limit by the multiplier in effect, as it already halved it for FSR 3.1, so the display gets the limit and VSync at the display's rate drops no generated frames; RivaTuner Statistics Server stays out while DLSS frame generation runs, since it counts generated frames. With DLSS 2x a limit of 60 now shows 60 on screen instead of 120.

nx2navi_dlssg.dll has to be rebuilt (tools/build_dlssg.py) for 3x and 4x.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 12:18:17 -05:00
chrg6
66927b8f94 Ask every driver but NVIDIA's to keep NaN and infinity in the game's shaders, which should bring Navi's orb back on AMD GPUs.
The game's shaders rely on IEEE NaN and infinity results: unordered comparisons compile to x > c || isnan(x), a
zero-length normalisation gives an infinity that a later test catches, integer masks travel through float selects,
and the translator's own NaN guards are isnan tests. Our SPIR-V never declared SignedZeroInfNanPreserve, which lets a
driver assume floats are never NaN or infinite. NVIDIA's driver keeps the IEEE results anyway; AMD's compilers do not
(issue #156: a NaN-bit select read as a signed integer gave 2^32; #41 and #110: black and white blocks on Navi and on
Link next to her). The player report: AMD GPUs draw Navi's sparkles but not her orb, whose light sits at her own
centre.

vk_pipeline.c spirv_nan_preserve now adds the capability, SPV_KHR_float_controls and the mode for 32-bit floats (16
and 64 where the module declares them and the driver can) to every game shader module. NX2NAVI_VK_NAN_PRESERVE: unset
on every driver except NVIDIA's own, 1 everywhere, 0 off. --selftest checks the rewrite; the rewritten modules of 600
translated game shaders pass spirv-val for Vulkan 1.3. Not yet seen on an AMD GPU.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 11:17:08 -05:00
chrg6
91acff672c Stop calling RTSS's EnumProfiles, which crashed the game at start where RivaTuner Statistics Server runs.
EnumProfiles walks RTSS's Profiles\*.cfg with _findfirst and _findnext and keeps the find handle in 32 bits. The handle
points into the process heap, which lies above 4 GB here because the guest address space takes the low part (memory.c
mem_init), so _findnext gets a cut pointer and faults in ntdll: the crash report then ends the game with code 71 before
the title screen (issue #231). rtss_limit.c profile_exists now looks for Profiles\<name>.cfg in RTSS's folder, which is
what EnumProfiles reports. NX2NAVI_RTSS_ENUM=1 calls EnumProfiles again, to test an RTSS that keeps the whole handle.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 11:22:38 -05:00
chrg6
7db0c5c75b Keep the crash report's exception filter in place, and write the game's exit code into its log from the launcher.
The last-chance exception filter is set at the start, before the GPU driver and the other DLLs load. A DLL that sets
its own filter later takes its place, and a fault in that DLL then ends the game with no FATAL line in the log. Two
0.6.0 logs from an RX 7800 XT end that way on the title screen. Once a second the filter is now put back and the
module that replaced it is logged (NX2NAVI_CRASH_FILTER_GUARD, default 1). When the game ends with a nonzero code,
the launcher adds that code, in hex with its meaning, to the end of logs\nx2navi.log, so a fail-fast exit that no
handler in the process can see still shows in the log a player sends.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 11:22:37 -05:00