On a GPU without mesh shaders the fallback replaces the translated module's entry function with its own, which cleared
only the primitive count and then copied the whole slot (vertex lines, count, index bytes) out of workgroup memory to
be drawn. Lines and index bytes the program did not write kept what an earlier workgroup left there and were drawn as
vertices and primitives. The fallback's entry function now sets every word of the slot to zero in a loop over the
workgroup's threads before the payload copy and the barrier, as the translator's own entry function does.
Checked: --probe-meshfb passes before and after (the fallback's pictures match the mesh pipeline's texel for texel on
an RTX GPU); its module part converts all 520 task and mesh programs of an installed shader cache with 0 failures, all
1,020 resulting modules pass spirv-val (vulkan1.3) and their 520 compute pipelines build on the device.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Vulkan leaves workgroup memory undefined, and a mesh program need not write every vertex it has room for or every
index byte. The mesh entry function copies all of them into the outputs, so what an earlier workgroup left in shared
memory became vertices and primitives: on AMD, long thin triangles across the foliage's shadow map. The entry function
now sets the vertex lines, the primitive count and the index bytes to zero in a loop over the workgroup's threads
before the payload copy and the barrier. Task programs keep clearing only their mesh count.
Checked by translating all 520 task and mesh programs an installed shader cache stores with the translator before and
after the change: every one translates and passes spirv-val (vulkan1.3) both times; each mesh module grows by about
88 bytes, task modules are unchanged. tools/xlate_smoke.py passes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The save at exit now copies the cache only once the builds already in the driver have finished, with new ones held back meanwhile, as it already did on other drivers. Intel's driver crashed copying a cache while builds ran into it, and when the window closes the game's save is written after the pipeline cache, so a crash in that copy would lose it. The case the save at exit missed, a window closed while the boot's prewarm workers built pipelines back to back, is covered by holding new builds back: a build from the file takes about half a millisecond. The prebuild's comment keeps why its default is two threads, with the measurements of one thread for the rest of the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The BC3 encoder's colour half is a four-colour BC1 block (c0 above c1, or every index 0 when they are equal), so a BC1 image of an opaque texture decodes to exactly the texels the BC3 one did. The encoder writes that half alone with its specialization constant BC1 set; its push constants are as before, so the BC3 pipeline is unchanged.
Every ASTC texture the CPU provides is made BC3, and its first upload checks its blocks while it copies them into staging: when all decode with alpha 255 (tex_astc.c astc_blocks_opaque, from the block header for all but the endpoint modes with alpha, which are decoded), the entry gets a BC1 image in place of the BC3 one before the decode. Later uploads into a BC1 image check again and go back to BC3 for content with alpha. A large texture's copy and check run on the ASTC decode workers, so its first upload copies faster than before. A check of its own where the texture is made cost 1.7 s of the render thread over a seven-minute teleport tour.
On that tour (Kakariko Village, the Graveyard, Death Mountain Trail, Kokiri Forest, Hyrule Field, RX 7900 XT), against BC3 alone in the same batch: the ASTC textures in Hyrule Field at the end 2,568 instead of 3,104 MiB, video memory at its peak 11,814 instead of 12,374 MiB, process commit at its peak 25,539 instead of 26,139 MiB; the first 7,200 frames in 93.7 instead of 101.3 s and the run's slowest 1 % at 24.1 instead of 21.1 fps. --probe-astc checks the header test against a decode of every generated block, the loop, its copy and the worker pool against it, and each BC1 block against the colour half of its BC3 block. NX2NAVI_ASTC_BC1=0 (astc_bc1 = 0) keeps every ASTC texture BC3; the sampling probe NX2NAVI_ASTC_BC_PROBE it replaces is gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ocarina anti-aliases every frame with its own SMAA in three compute passes after the bloom composite. The new aa
setting (nx2navi.ini aa, the Screen tab's Anti-aliasing row) keeps that by default. off, fxaa and smaa leave out the
game's edge and weight passes and replace its composition with a pass of our own that writes the same square-rooted
RGB9E5 words into the scene target: a plain copy, an edge smoothing written here, or the SMAA reference implementation
with its area and search textures (MIT). taa is DLSS or FSR 3.1 at the scene's size, which the row sets through the
upscaler; while either runs, the game's SMAA stays whatever aa says. The game's passes are known by a hash of their
guest code. The shader build now also rebuilds a header when a file its source includes changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game's movie player adds the time manager's step to an accumulator at each update and advances the movie by whole
pictures of it, at most the player's limit per update, which is one for the Triforce movie. While a movie plays the
game is held at 60 updates a second, but every late frame cost an update, the pacer started its slots again from the
late one, and the steady step's payback of the lost time came as steps over one frame, which the player cannot turn
into more than one picture. So each late frame put the picture further behind the sound, which plays by the clock, and
it never caught up.
While a movie plays the step is now exactly one movie frame, and the pacer keeps the movie's slots through a lateness
of up to a second, presenting the frames after a late one at once until the game is back on them. The updates then
average the movie's rate, and the picture, the event's update count and the game's clock all stay with the sound.
movie_clock = 0 gives the earlier behaviour. The movie log now measures the picture on screen against real time where
the game releases it (the game fetches pictures ahead into a list of its own) and reports it at the end of each movie.
test_hitch = <every>:<ms> makes a frame that much late every so many presents, for test runs.
Measured on the Triforce movie (event Dm_Kokiri_0095, 7,040 pictures, 117 s), one exe with movie_clock = 0 against 1,
and a 70 ms late frame every two seconds (test_hitch = 120:70), as a run with natural hitches had shown a drift of 40 ms
every ten seconds. Drift of the picture on screen behind real time, from the movie's first 10 s to its end:
fps_limit before (updates/s, drift at the end) after (updates/s, drift over the movie)
unlimited 58.86, 2,187 ms behind 60.22, flat at 53 to 55 ms
144 58.86, 2,196 ms behind 60.04, flat at -11 to -15 ms
120 58.98, 2,257 ms behind 60.20, flat at -1 to 0 ms
60 58.88, 2,220 ms behind 59.98, flat at -21 to -22 ms
Without the late frames both kept time (unlimited: before flat at 21 ms, after flat at -13 ms). The selftest,
--probe-cfg, --probe-kernel, --probe-movie and tests/frame_step_check.py pass; the check now plays a movie started at
240 fps with late and short frames and needs exactly one frame every update.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The bias on the scene's tiled material textures was log2(render / output) alone, so DLAA got 0 and Quality -0.58. NVIDIA's DLSS guide asks for log2(render / output) - 1 on top of the game's own bias: the jittered frames the upscaler accumulates resolve detail a level finer than one frame shows. The -1 now comes with the jitter (dlaa_jitter, on by default): DLAA gets -1, Quality -1.58, Performance -2, for DLSS and FSR 3.1 and 4 alike, which share the bias. Without jitter it stays as it was, where a sharper level would shimmer. Which samplers take it, and the clamp to the device's limit, are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Jitter was off on Ocarina because with it the ground and characters went white within seconds. The cause: the game draws its depth pre-pass into the scene depth, copies it into a second image of the same size, and shades the same geometry into the light target against the copy with the depth test EQUAL. Only the draws into the first image took the jitter, so the shading draws compared unjittered depth with jittered depth, EQUAL failed on nearly every pixel, and the light target kept its clear colour. Frame dumps with and without jitter show the shading passes darkening the light target from a mean of 133 to 13 without it and leaving it at 112 with it.
On Ocarina's frame every draw that projects through the camera (it binds the scene context at c3) into a D32F depth of the scene's size now takes the jitter, and full-screen passes drawn with a scene depth attached do not: the bloom composite DLSS reads would otherwise move the picture by the jitter a second time. The viewport is recorded again whenever a draw's jitter differs from the last one recorded. Jitter is on for Ocarina by default (dlaa_jitter = 0 still turns it off), and the DLAA log line counts jittered frames and draws.
Checked in Hyrule Field with the camera turning: the picture's brightness matches the run without jitter (mean 33 to 63 against 35 to 60; 144 to 188 before the fix), and in 20 motion-vector checks the warp error is lowest with the jitter applied as DLSS is told it (0.032 to 0.077), against 0.076 to 0.141 with its sign flipped and 0.059 to 0.106 left out, still cameras included: the scene moves by the jitter of that frame, in render pixels.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
DLSS frame generation (Streamline and the NGX path) and FSR 3.1 and 4 upscaling and frame generation were told the depth came from a camera with near 0.1 and no far plane. Ocarina's projection has a finite far plane that changes with the camera: in Hyrule Field its z row is (-1.00001, -0.200001), near 0.1 and far about 25,000; the camera before it had far about 1,000. With the far plane taken as missing, a surface 10,000 units away was read as 16,650. The planes, and whether the depth is inverted, now come from the frame's projection and the device's depth mode every frame (vk_dlaa.c proj_planes), with one log line when they change. The stored depth is already 0 near and 1 far: the -w..w clip depth the pipelines keep maps to exactly what a 0..w projection with the same planes stores, and a frame dump's scene depth spans 0.975 to 1.0.
FSR's contexts lose their infinite-depth flag and take the far plane from each dispatch. FSR frame generation now gets the camera's field of view instead of a fixed 1 radian, and the upscaler gets it too (its caller passed 0). The view's units are metres, not the centimetres FSR was told: the camera orbits Link about 4 units behind him at about 3 units a second.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The stand-in for the game's tensor-core upscalers wrote the largest image bound to the dispatch. Image slots keep
their bindings from earlier dispatches, and with a 3840x2160 picture the scene upscaler leaves its 3840x2160 RGB9E5
target in slot 2, larger than the movie network's real 2560x1440 output in slot 1. The output kept stale bits for the
whole movie, which showed as frozen coloured stripes (issue #520). The output is now looked for only among the image
entries the program's NVN2 control section counts (at least slot 0). The binding log of NX2NAVI_LOG_CS_BINDS also
prints those counts.
Checked with Dm_Kokiri_0095 at game_res 2160 with DLAA (stripes before, the movie after), at 1440 with DLSS
performance (unchanged), and in Goron City gameplay at 1440 (same picture, 164.9 against 159.8 fps).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A write-back finishing on the completion thread could arm its range between a mirror's eviction and the drop of its
buffer, naming the freed buffer; a later write into the new mirror then marked that range stale and its next touch
copied from the freed buffer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The HDR row lists Off, RenoDX (the game's picture tone mapped to the display, the one fixed look) and Native (the game's own HDR, taken up at the next start), with the peak, game and HUD whites under either.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HDR on is the game's scene through the observer-response mapper, anchored to the game's own mid grey and tone slope, with half of the hue bend of the game's clamp: the defaults the menu had. The tone mapper choice, the mid grey, the tone slope and its match, the hue clip, exposure, highlights, shadows, contrast, saturation, highlight saturation, blowout, flare, hue, grade and gamma are gone from the menu, the settings table and the example ini; a file that still sets them works as before, the keys read by nothing and logging nothing. The menu's HDR row is Off and On, with the peak, game and HUD whites under it. The game's own HDR is still there for a file that sets hdr = native, and the row lists it only then. The luminance mapper and its grading code, which no setting reaches any more, are removed from the tonemap library, and the support buffer carries one vec4 for it.
The dark tones of a dark scene sat far above black: the present showed the game's sRGB-encoded picture as that encode decodes, linear near black, while the game is graded for a display of gamma about 2.2, and since the observer-response mapper became the default the 2.2 correction ran with the luminance mapper only. A scene value of 0.003 came out at 0.29 nits at a white of 350 nits, where a 2.2 display shows the game at 0.015. The present now always shows the picture as a 2.2 display would, and the tonemap aims its peak lower by that correction's inverse, so the brightest light still reaches the display's peak; the same value comes out at 0.017 nits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A shot taken from an HDR10 swapchain (the menu's test hook, NX2NAVI_SHOT_EVERY) now writes the picture's luminance in nits to the log, the darkest pixel, four percentiles and the brightest, and its pixels as the swapchain holds them beside the PNG. The PNG of such a shot shows the HDR display's light at the HUD's white through the power 2.2, not the sRGB curve, so a dark tone the HDR display lifts looks lifted in it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Past 2048 released entries the oldest one that nothing sampled lately went. A render target can be used again long after anything sampled it: in Kokiri Forest two targets released at the area's load went about two minutes later, were used again after that and made again empty. On an 85 s route there a frame came out black in 1 of 12 runs, with the two targets dropped in 7 of them; with such entries kept, in 0 of 18. The sampled-lately rule holds from 16384 released entries on.
Co-Authored-By: Claude Fable 5.2 <[EMAIL]>
The Resolution row lists each picture height as the size of the game's shape at it (21:9: 2560 x 1080, 3440 x 1440, 4300 x 1800, ...; the window's own shape where the picture follows the window) and sets both the picture's height and the window outside fullscreen, which follows at once within the monitor; the picture's height takes effect after a restart as before, and Native leaves the window as it is. A build without the widescreen patch sets, which draws the game's own size, keeps the Window size row.
The Upscaling rows and the overlay name FSR 4 by the major and minor version of the provider the driver lists (AMD FSR 4.1 for 4.1.2), and AMD FSR 4 until the library was asked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Regions the game has not written for a while are write-protected so that the per-submission write-watch queries can skip them, and the first write thaws them. The game's loaders keep writing the buffers they stream an area into, so those regions were frozen again as soon as they had been idle a moment and thawed again moments later: running from the Kakariko Village gate across Hyrule Field froze 31,004 regions and thawed 28,918 by a write in nine minutes. While the loaders wrote and the driver locked new memory, each thaw's VirtualQuery took 15 to 20 ms: a loader thread stalled 78 to 111 ms in thaws in every one of the hitches of 125 to 140 ms of that walk, with the game's main thread waiting for it.
A write that thaws a region within a minute of its freeze now holds it thawed for 4 seconds, doubled at each such thaw up to 10 minutes; a region that stayed frozen longer starts again from nothing. On the same walk: 8,284 freezes and 6,355 thaws, no frame over 100 ms while Link ran where 29 and 52 a minute had been, the slowest 1 % of frames at 19 and 24 fps instead of 9 and 7, and at the walk's end, Link standing at the edge of Lake Hylia, 60 fps instead of 38 with the slowest 1 % at 43 instead of 20. The perf trace's write-watch line counts the holds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The merge changes no file; it brings the pull request's own commit, authored by Gaetarra, into main's history.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Turned to alternate sides every time, he stayed pressed against the cliff face south of the Kakariko Village gate for ten sidesteps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A teleport without a start position, or with one the area does not list, put Link where nothing held him: in Kakariko Village he fell for good, and the game refuses events, teleports included, while Link is in the air. The game's list has an empty name in 45 areas, which the Teleport tab listed as a default start; those entries are left out, and such a request takes the area's first listed position. For a few seconds after arriving, Link falling 25 m below where he arrived is taken for a fall through the ground, and the area's next start position is asked for, up to three times.
The free camera's left stick moved it along its view, so a camera looking down flew into the ground, and below it the picture showed the void under the map, which looks like ground the game failed to draw. The stick now moves it level, only ZR and ZL change its height, and with DLSS, DLAA or FSR 3.1 or 4 on, nine of the view distances the upscaler's motion pass works out (vk_dlaa.c fcam_probe) come back each frame and the camera rises where the ground ahead or below is within a clearance that grows with its speed. Flown at 25 m/s two metres above Hyrule Field, it went over every hill.
For test runs, NX2NAVI_DBG_TEST gains route and routeto: Link is steered through points, or through the area's own start positions, from the way he moves, and sidesteps where he stops gaining ground. The start positions' coordinates are read from the same file as their names.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Above the VRAM pressure threshold the released textures that come back intact were dropped oldest first, however recently released. The game releases and takes back hundreds a frame in towns, so the list is mostly those, and each drop was made and uploaded again within frames and freed nothing. With the budget taken as 7.5 GiB (NX2NAVI_VRAM_BUDGET_MB), seven minutes of teleports between Hyrule Field, Kakariko Village, the Graveyard, Death Mountain Trail and Kokiri Forest dropped 82,288 and stayed over the budget throughout; with 11 GiB, 178 draws met a texture that was gone. They now go by the rule drop_stale keeps (released STALE_FRAMES ago and idle): on the same tour 34,699 drops, a fifth fewer textures made again, a third less time the render thread waited on textures, 4 draws of a missing texture instead of 11, and the slowest 1 % of frames in Hyrule Field afterwards at 32 fps instead of 22.
Past the process's own commit bound (tex_proc_commit_mb), textures were dropped and idle live ones evicted as under a low system commit. The bound compares the commit less the video memory in use, and a dropped texture lowers both sides alike, so nothing a drop did could bring the process back under it: textures went one after the other for as long as the rest of the process stayed large, and the ground flickered white with the system's commit to spare (#434). The bound now only writes its line into the log.
The perf trace's texture origins line counts the slots a finalize leaves current because another texture of the same parameters was registered at the storage since (the terrain heightmaps of pull request #535): 173 at the load of a Hyrule Field save, and between 40 and 365 every 60 frames while Link runs through the field, each of which the old rule left stale.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each upscaling mode made a context of its own (about 217 MiB of video memory for FSR 4 at 3440x1440, 50 to 70 ms each), up to six were kept beside FSR 3.1's, and three FSR 4 creations that failed in a row turned FSR 4 off for the run: the menu then showed FSR 3.1 and no longer listed FSR 4. A player's log had the third failure (error 3) right after stepping through the modes with ten contexts alive. A context now takes every render size up to its output size, which the API allows at each dispatch; a creation that fails frees every context not in use, FSR 3.1's idle ones too, and is tried again; FSR 3.1 serves the frames between tries two seconds apart; only four failures in a row turn FSR 4 off, and choosing it in the menu again tries it anew.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ocarina streams its terrain heightmaps (R32F, 260x260) through a fixed set of storage. It initializes the next piece's texture at the storage of the one before, registers it in the texture pool, and only then finalizes the old texture object, which has the same parameters. vk_texture.c vk_texture_release marked every slot at the storage with the same parameters as finalized, the new registration too. A finalized CPU-written slot takes no image made from its storage again (slot_resolve's stale rule), so the new piece drew the zero stand-in and was drawn at height zero, far below the ground around it: the holes and stretched ground of issues #453 and #569, through which the sky shows. A finalize now marks only the slots registered with its own texture object (the initialization serial); a slot registered with another texture object at the same storage names that one, which is still live.
From pull request #535 by MartinIsla, in its final form, which no longer skips the whole release while another texture with the same parameters is live (that kept textures the game had released and drew dark lines in Kakariko's fog). --probe-vkmem gets the pull request's check: a release leaves another live texture's slot current and marks its own; it fails on the old rule and passes with this one, with and without shadow storage.
Added here: under the perf trace a line every 60 frames counts the slots a finalize marked, the slots of another live texture it left current and the lookups the stale rule answered with the stand-in, the terrain's heightmaps counted apart, so a run shows whether the case comes up and whether stand-ins are still drawn.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
No menu row sets coop_beta; it lives in nx2navi.ini under [coop] (NX2NAVI_COOP_BETA) and takes effect at once. Co-op
itself is unchanged: coop = 1 still runs a session with or without the tab. The notes and the co-op guide say how to
show the tab.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The draft notes for the release after 0.7.1 become the notes of 0.8.0: every change since 0.7.1, the install and
update steps, the requirements (mesh shaders are no longer required, with the fallback untested on such a card), the
known issues and the thanks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On Linux every driver got shadow storage (copies of guest memory beside it), which exists for amdgpu, where importing guest memory costs the write protection of its pages. NVIDIA's own driver imports without that cost, so there the copies are only the slower path: in Kokiri Forest on 0.7.1 (RTX 4090) imports ran at 51.9 frames a second and the copies at 27.4. Until now only the AppImage's play.sh knew, by setting NX2NAVI_SHADOW=0 when NVIDIA's kernel driver was present at build time, so a game started any other way got the copies, and a PC with that kernel driver whose game ran on another card got imports where it should not. The game now chooses by the driver of the device it runs on, play.sh no longer sets the variable, and NX2NAVI_SHADOW=1 or 0 still decides. The driver is asked when the device is picked, before the storage is chosen.
Windows is unchanged: the device probe here reads "mem: mode mirror" with no shadow storage line, and the shadow line with NX2NAVI_SHADOW=1. The Linux path itself was not run: there is no Linux machine here.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The rule that spares a released entry the game still uses went by lookups, and the texture pool's refresh looks up
every registered slot in each submission that draws through the pool. With the game's own upscaler in use
(upscaler = fsr) its render targets move to new addresses in every frame and each leaves a released entry behind
whose descriptor stays registered: all 2,049 entries counted as looked up, the sweep fell back to the oldest lookup,
which among entries stamped in the same submission is no order, and took entries still drawn, 200 to 450 per 60
frames over a town, with buildings black or wrongly lit for single frames in a player's captures.
The entry that goes is now the oldest release that is overwritten or that nothing sampled or drew into for 120
presents (samp_frame: the pool marks and every lookup that is not the pool refresh), and only when all were sampled
within that time the one sampled longest ago.
Checked: it builds, and a player's hand test of 30,000 frames through eight areas with that upscaler kept the list at
its limit, dropped 50,182 entries past it and showed none of those frames. No scripted run was made, and which
entries pile up in a town was not traced to their kinds.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
That wait ends when the GPU has run the submission's own commands (wb_split = 1). The completion thread was then still
at the last frame's submissions, so the occlusion counts, counter reports and event values the game reads next reached
its memory after it had gone on. A player's capture in Hyrule Field shows the result: trees, ground and walls lose
their direct light for single frames about every 36 frames, 57 of 1,800 frames, and with the fence's wait
(wb_split = 0) the same place showed none.
The fence's wait also covers the rest of what the completion thread does for those submissions, 0.23 to 0.40 ms a
frame of page stamps the game does not read. So those results now have a queue of their own
(vk_completion_add_result), and the waiter runs the ones due for its submission and the ones before it as soon as
the GPU's signal is there; the completion thread runs them the same way, ahead of its other callbacks, one runner at
a time and in the order they were queued. wb_split = 3 is the bare wait as it was, to measure against.
Checked: it builds, the launcher tests and the address table check pass, and the player's hand test of this wait at
that place showed no such frame. Not measured: no scripted run of it was made (the one scripted run with the bare
wait in that field shows 1,170 occlusion counts a frame written late and no dark frame, so the script does not
reproduce the fault), and its cost against the bare wait is not known.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The frame step test gets a stub for the debug menu's game speed, which frame_rate.c now reads; the mouse camera test
one for the input script's perf segment mark. The shared save test defined mem_probing twice. The launcher's self-test
draws 16 screens now that both lines added one.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The author of the pull request it was ported from closed that request on 2026-11-11 with the words that they give no
permission to use its code. The history (NX2NAVI_VA_REPORT, runtime/vk_vaddr.c, the stack walk it used and its notes
in the docs and the example settings) goes; the lost device's report keeps the breadcrumbs, the pass marks, the video
memory and the driver's fault information.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Brought onto the line with FSR 4, its frame generation and the debug menu. Where both sides had added to the same
place, both stay: the patch table keeps the pickup count and the free camera, the settings list keeps both sides'
names, the menu includes the co-op page and the debug menu, and the launcher builder takes the pipeline list and the
FSR 4 folder. Both sides had added the menu's typed-character event; one definition stays, with the window code that
passes characters outside the basic plane.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>