Commit Graph

80 Commits

Author SHA1 Message Date
chrg6
f9f0505ed1 Build a large compute shader ahead only when a run has dispatched it, and release the shaders of pipelines the boot does not keep.
The 2 GiB of device memory a filled cache cost was not the thousands of compute pipelines but twenty of them: the compute shaders of 0.9 to 2.0 million SPIR-V words, the game's tensor-core upscaler programs, which nothing dispatches. A pipeline of one holds about 100 MiB of device memory from the moment it exists, and the driver keeps that memory when the pipeline is destroyed, so keeping only the recently dispatched pipelines did not help: the boot pass still created the twenty from pipeline-cache.bin at every start. Measured with --probe-prewarm on a copy of an installed copy's caches (RTX 5090, NVIDIA 621.01): the pass over all 4,066 compute shaders took the device memory from 386 to 2,398 MiB and the process's commit up by 2.5 GB; the same pass before the twenty were in the cache left the device memory at 386 MiB, and all 4,046 other pipelines kept at once cost 2 MiB.

A compute shader over NX2NAVI_LIB_PREBUILD_BIG is now built ahead, from the caches or by the background builder, only when the usage record says a run dispatched it. None of the twenty is among the 138 shaders eleven runs dispatched. Should the game dispatch one for the first time, that dispatch compiles it once and later boots build it ahead.

The boot also reads the shader of a pipeline it does not keep as a copy and releases it after the build, instead of leaving 3,900 shaders loaded (240 MB of commit); a first dispatch then reads its shader from the disk, 0.04 to 0.10 ms in the probe.

With both, the same pass on the same caches leaves the device memory at 386 MiB and raises the commit by 47 MB; 256 first dispatches after it took 0.13 ms on average, 1.8 ms at most, all read from the cache file. With compute_keep = all, which builds everything as before, the pass ends at 2,528 MiB. Not yet run in the game.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 04:53:00 -05:00
chrg6
1b9016896a Say where the boot's list of compute shaders comes from: mostly the shader preparation, not play.
An installed copy's warm list has 42,344 variants, 42,142 of them from shader-prepared.bin, and its 4,066 compute shaders are what the boot kept pipelines for. The comments and the settings text said the list grew with the play history; a copy with prepared shaders held the 2.3 GiB from its first boot. Comments, docs and the ini text only.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit ea984fe05b995c5dad1e0f49c5f44de9ee8f19b2)
2026-11-10 03:34:03 -05:00
chrg6
61a13c62b9 Keep only the compute pipelines of recently dispatched shaders from the boot, and build the others into the pipeline cache without keeping them.
The boot prebuild built the pipeline of every compute shader play ever recorded and kept all of them for the process. A pipeline that exists holds driver memory whether or not anything dispatches it: with a history of 4,066 compute shaders they held 2.3 GiB of device memory, and its share of the process's commit, from the title screen on (RTX 5090, NVIDIA 621.01), while a boot into the first village dispatched 95 of them.

The boot now keeps the pipelines of the 512 compute shaders dispatched most recently (compute-used.bin next to pipeline-keys.bin records which run last dispatched each; the setting is compute_keep, with "all" for the earlier behaviour). Every other one is still built at boot, so that the pipeline cache holds it after an update or a driver update, but destroyed at once, and created from the cache at its first dispatch. A dispatch that comes while such a build runs gets that build's pipeline.

Each boot stage now logs the device memory and the process commit it leaves ("mem: boot stage"), and the log says what the first dispatches cost. nx2navi.exe --probe-prewarm runs these stages without the game from the caches next to the executable and times first dispatches of pipelines the boot did not keep: 256 of them took 0.19 ms on average and 3 ms at most, all read from the pipeline cache file, and 372 pipelines built and destroyed at boot left the device memory where it was.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 16a796d623686bca5304eaf1b29981247453a413)
2026-11-10 03:34:03 -05:00
chrg6
fa29f3fea5 Merge the second PR intake pass: anisotropic filtering in the Screen tab, the X3D die choice, the NVIDIA shader cache limit, the NGX core search and other fixes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 03:32:46 -05:00
chrg6
417fbcf5ff Merge the memory report branch: the device address table gives empty blocks back, and textures give way before VRAM mirrors are refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 03:32:30 -05:00
chrg6
2a9efee4c5 Merge GitHub main into the test line: the launcher's customisation, the settings and sound changes, and the warm stage-library cache.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 03:32:30 -05:00
chrg6
d726a4fcde Release the DLSS features with a larger input before a smaller one is made, so a DLSS mode picked in the menu no longer stripes the pause screen.
The rule that releases the kept features acted only after a feature had been freed. Picking ultra performance in play
made a feature of a third size while the gameplay and pause features stayed, with nothing freed, and the next pause was
striped as before. What the two cases share is a feature made while one with a larger input is alive; one made while a
smaller one is alive has never shown it. Both halves now apply unless dlss_idle_free is 2, and 0 only stops idle
features from being freed.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 03:30:31 -05:00
chrg6
74d3412736 Release the DLSS features that stayed before one is made after a release, so the pause screen no longer comes out striped.
A pause of 3,600 frames frees the gameplay feature; the unpause makes it again, and the pause screen's feature, which
had stayed, drew alternating bands of rows black or noise at every later pause. A scripted pause, unpause, pause was
striped in each of the 8 runs in which the gameplay feature had been freed and in none of the 12 in which it had not;
setting the kept feature's sizes at each evaluation, tried first, changed nothing. Features made one after the other
with no release in between are fine, so that is now the only way one is made. dlss_idle_free = 0 keeps every feature
instead, 2 is the old behaviour.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 03:30:31 -05:00
chrg6
1e767363a7 Release the DLSS features with a larger input before a smaller one is made, so a DLSS mode picked in the menu no longer stripes the pause screen.
The rule of 16acd83 acted only after a feature had been freed. Picking ultra performance in play made a feature of a
third size while the gameplay and pause features stayed, with nothing freed, and the next pause was striped as before.
What the two cases share is a feature made while one with a larger input is alive; one made while a smaller one is
alive has never shown it. Both halves now apply unless dlss_idle_free is 2, and 0 only stops idle features from being
freed.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 53a2e7818c3bede9f916e8a102dea038142af0c3)
2026-11-10 03:16:22 -05:00
chrg6
1cf947fe4b Release the DLSS features that stayed before one is made after a release, so the pause screen no longer comes out striped.
A pause of 3,600 frames frees the gameplay feature; the unpause makes it again, and the pause screen's feature, which
had stayed, drew alternating bands of rows black or noise at every later pause. A scripted pause, unpause, pause on
0.6.1.22 and 0.6.1.23 was striped in each of the 8 runs in which the gameplay feature had been freed and in none of the
12 in which it had not; setting the kept feature's sizes at each evaluation (the commit reverted before this one)
changed nothing. Features made one after the other with no release in between are fine, so that is now the only way
one is made. dlss_idle_free = 0 keeps every feature instead, 2 is the old behaviour.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 16acd83397d0b59904fd4c0bd96cea8285bc0a6f)
2026-11-10 03:00:33 -05:00
chrg6
7bc7f63a7d Let textures give way before VRAM mirrors are refused, and under commit pressure whatever the released list holds.
Three faults a tester's 39 minute session showed (a 24 GB card, 32 GB of memory, a 64 GB commit limit), each still in the code:

A pool gets no VRAM mirror past seven eighths of the budget, and textures only gave way above 90%, so at 88% mirrors of 0.4 MiB were refused and the game ran at 11 to 20 fps while the textures of areas left long before stayed. The default of tex_vram_pressure is now 80. A refused mirror's request for room also stands until the use is down to where the mirror fits, for up to 64 checks, instead of buying the 64 textures of the one check that read it.

While the commit was low, live textures went only once the released entries were down to 256 MiB. Where the game releases and takes back 200 to 300 textures a frame the released entries held 1.4 to 2.0 GiB, none stale, so nothing went at all. Live textures now go as soon as the released entries have no full step of stale ones left; the entries the game takes back stay, as before.

The commit counted as low only by the system's figure, which depends on the page file: 59 GB in use of 64, with this process at 42 GB. tex_proc_commit_mb adds a bound on the process's own commit (default the installed memory, at least 24576 MB; 0 turns it off), with a line in the log when it starts and stops holding.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 02:25:14 -05:00
ordinarybob
662a6e88ee Run the game on the die with the larger L3 cache on processors whose dies differ (AMD's two-die X3D processors).
Windows places a game on the V-Cache die only when it recognizes the exe as a game, and it does not know this one, so the threads were spread over both dies by frequency preference. cache_die = 1 (the default) narrows the process to the logical processors that share the largest L3; it never widens the set the process was given, and does nothing where every L3 has the same size. The recorder's reserved core is then chosen inside that set.

Co-Authored-By: Claude Fable 5.2 <[EMAIL]>
2026-11-10 02:01:35 -05:00
Michael Schienbein
03cb703e8f Apply anisotropic filtering while the game runs, and add it to the Screen tab.
NX2NAVI_ANISO was read once, when the first sampler was made (vk_texture.c sampler_features), and make_sampler raised the level of the surface textures' samplers as it created them. Samplers are looked up by the game's parameters and live until shutdown, so a new level could only reach them after a restart, and the setting had no row in the menu.

The decision which samplers get the level moves from make_sampler into aniso_raised, and sampler_for puts the raised level into the sampler key, as it does with the DLSS texture bias. vk_sampler_aniso_live reads the setting again after a settings change, at each present beside vk_dlaa_frame's bias; on a new level it clears the slots' samplers and bumps the sampler generation, as vk_sampler_dlss_bias does, so the slots and the descriptor caches take samplers of the new level from the next draw. The old level's samplers stay until shutdown like every sampler. The setting is marked live in cfg.c, and the Screen tab gets a Texture filtering row (Game, 2x, 4x, 8x, 16x) with the description the catalog already had.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 01:56:30 -05:00
DeepDaddyTTV
6e0dc0b2a6 Document the automatic BC3 memory thresholds for GPU texture decoding. 2026-11-10 01:55:28 -05:00
epicmeme546
e10ef60fd5 Keep the driver's cache of stage libraries warm, link a missing pipeline instead of skipping its draw, and count the texture cache's waits in time.
The preparation builds every stage library once so the driver's disk cache holds it and a library a draw needs later takes under a millisecond. Turning dynamic vertex input off for AMD's RDNA 3 and newer driver changed the dynamic states every library lists, which gave each one another entry in the driver's cache, and nothing built them again: an update carried the prepared shaders over without the driver step. On an RX 7900 XT (26.10.1) all 42,142 prepared libraries were cold, 93 ms a vertex and 242 ms a fragment library on average. With no pipeline recorded, a walk through a village skipped 11,180 draws while their pipelines built and made 94 draws wait 5.5 s in all, four of them 1.0 to 2.0 s; a player's session log shows up to 114,834 draws skipped in 600 frames and 181 waits of 251 ms on average. Skipped ground and walls appear and disappear, and a skipped lighting pass is a black frame with the interface intact.

- The game checks the driver's cache at every start (vk_pipeline.c lw_start): a sample of the prepared fragment libraries is built, and when their median time says the cache is cold the whole prepared list is built into it again on idle-priority threads while the game runs. shader-warm.txt records a warm in progress, so the next start goes on with one a run ended, and stops the tries on a driver that does not keep the libraries. This also covers a driver update and a cache the driver emptied.
- An update that carries the prepared shaders over runs the game's --warm-shaders (tools/make_game.py warm_driver_cache): 11 s with the libraries there, about 8 minutes with all of them cold on that card.
- A draw whose pipeline is missing waits for its fast link from a budget of 6 ms a presented frame, 3 ms at most each (NX2NAVI_PIPE_LINK_MS), before it is skipped: with warm libraries the link is done within that.
- Full-screen draws wait from their 50 ms budget again instead of being skipped (NX2NAVI_PIPE_SKIP = any is the default; fullscreen stays selectable). With warm libraries the wait is a millisecond.

The same walk afterwards: libraries 0.3 and 0.7 ms on average, 1,605 draws skipped, 1,473 of them in the scene's first 600 frames and 8 to 80 in each 600 after, and 19 waits of 60 ms in all. First visits to four other saves (a mountain pass, the Lost Woods, Kokiri Forest, a river) waited 12 to 84 ms in all except the Lost Woods, where mesh shader pipelines, which have no stage libraries, and vertex libraries that need added outputs still compiled once: 23 waits, 2.1 s in all, the longest 776 ms.

The texture cache counted its waits in presents chosen at 60 a second: at 165 presents a second the 1800 that stood for thirty seconds were 11 s, so a released render target went sooner than meant and a texture out of view for 11 s was retired and showed its stand-in for some frames when it came back. The counts are now taken times the present rate over 60 (presents_for), and a texture is retired after two minutes without a sample instead of thirty seconds.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 01:36:29 -05:00
epicmeme546
41eb0e635b Apply the camera's stick sensitivity and the speaker layout during a run.
NX2NAVI_STICK_SENS was served to the game as a multiplied camera pack at start only. A change during the run is now written into the game's memory: the StickSensitivity array as the game holds it, at the factor in effect, is looked for in the guest's heap and every copy is overwritten at the new factor. The game reads the array each time it steps the camera, so the speed follows at once. The copies found are remembered, so a later step of the menu's slider takes no search, and a search runs again a moment after the game opens the pack anew. On Ocarina 1.1.1 the first change of a run found 4 copies in about 2 s on its own thread, and the same stick push for a third of a second turned the camera about 30 degrees at 1, 90 at 3, 10 at 0.3 and 30 again at 1, all in one run.

NX2NAVI_AUDIO_CHANNELS was decided once. A change that gives another channel count now signals the device change events the game holds, as a console does when its output moves: the game asks GetActiveChannelCount again and mixes for the new count, and the mixer makes its SDL stream again with that count at its next render. On Ocarina 1.1.1 the centre input of the device sink went from 0.0006 rms to 0.013 within the 5 s after stereo became 5.1 and back to 0.0006 after stereo was set again, with no underrun. NX2NAVI_TRACE=audio logs the six inputs' levels with its level line.

Both rows lose their "after restart" note. The graphics card, widescreen, the resolution, the game's language, the button prompts and the game's native HDR still take a restart: the game or the Vulkan device reads them once while starting.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 00:21:31 -05:00
chrg6
a3e681f4e5 Merge the performance pass's texture generation and write-back changes into the test line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 23:43:10 -05:00
chrg6
9728424aec End the wait after a frame's first submission when its passes are through, not its write-backs.
Every frame the render thread waited about 5 ms for the GPU after the frame's first submission, with the game
CPU-bound in every area. The wait is there so that the GPU has run that submission's passes before the game
rewrites what they read. But the submission also ends with the write-backs of what its shaders wrote, 60 MiB merged
into guest memory in 3 to 4 ms of GPU time, and the wait covered those too.
The write-backs now go into a part of their own. The part before them signals a second timeline, the executed
timeline, and the first-submission wait waits on that; the write-back part signals the timeline as before, so every
fence the game asks for still covers them, in the same queue order. wb_split = 0 keeps one part and the old wait.
Not measured in the game yet.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 23:42:12 -05:00
epicmeme546
9ae7764ab5 Change a setting with the mouse only on the two framed arrows beside its value, and switch HDR without a restart.
In the settings menu a click anywhere on a row stepped its setting to the next value, and the left arrow stood left of the value's text, so it moved whenever a value of another width came up: clicking the left arrow through a list landed on the row at the second click and stepped the other way. Each stepper now has its arrows in white frames at fixed places, the left one the width of the row's widest value from the right one, and the mouse changes the value on those frames only; a click on the rest of the row selects it. On and off rows have the same arrows. An arrow at the end of its values is drawn faint and does nothing, and a button held on an arrow repeats as a held key does. A, Enter and left and right work as before.

NX2NAVI_MENU_TEST_CLICK clicks rows by their setting's name during a menu test run. On an RX 7900 XT at 3232x1352 the arrows stepped the performance overlay one value a click and stopped at both ends, and clicks on the body of four rows changed nothing.

HDR between off and the tone mapper now follows the menu. The HDR path is set up at every start (vk_hdr_armed): the swapchain colour space and metadata extensions, the tonemap splice and the settings in the support buffer, with the spliced tonemap returning the game's own SDR result while the swapchain is SDR. A change of the setting makes the swapchain again in the other format. On the same card a run that started with HDR off went to an HDR10 swapchain and back, and one that started with HDR on went to SDR and back, with the picture right in each state. The game's native HDR still waits for a restart, as the game asks about the display once, and the row says so. NX2NAVI_HDR_LIVE = 0 leaves the HDR path out of a run that starts with HDR off.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 23:27:02 -05:00
chrg6
04de04bc28 Give a texture bucket the generation its state had before, for releases as well as take-backs.
The first version put a bucket's generation back only when a take-back undid the release just before it. A town run
with it showed half the take-backs going back and the fullest bucket (1,315 slots) still bumped 7,736 times per
3,600 submissions: the game keeps those textures released and takes them back for a moment, so every release was a
new generation and the pool refresh still refilled 5,220 slots per submission.
A bucket's state is now named by its epoch (changes other than a release or a take-back) and the XOR of the uids of
its released entries. A release or a take-back that brings the bucket to a state it was in before gets that state's
generation, whichever way round, and in any order of several entries; a new state gets a new one, never one used.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 23:01:18 -05:00
chrg6
4cbdecb64b Round the physics solver's step count up above 60 fps and give Ocarina a steady step.
Above 60 fps players fell off moving platforms. The physics system takes its solver step count for a frame as
trunc(frames per update * 4 + 0.001): 4 at 60 fps and 8 at 30, the rates the game ships with, but 3 from 61 to 80
fps, 2 to 120, 1 to 240 (144 solver steps a second at 144 fps against 240 at 60), and 0 in a frame shorter than a
quarter of a 60 Hz frame. The solver skips its whole solve and sub-integration loop at 0, so such a frame resolves no
contact or friction and moves no rigid body. At a 240 fps limit, which "unlimited" paces at too, that was the frame
after every late one: the pacer keeps its phase, so the next display interval is shorter than the period.
The new patch set osolver rounds the count up, ceil(frames per update * 4 - 0.25): 4 and 8 as before, never fewer
steps a second than at 60 fps, at least 1. physics_steps = 0 gives the game's own count.

The step itself was the mean of the last five display intervals and changed with every frame: intervals of 5 and 30
ms in turn gave steps of 15 and 20 ms in turn, and one 60 ms frame at 200 fps took the step from 5 to 16 ms for five
frames. The game never saw a changing step on the console. The step is now the mean of the last 12 intervals without
the longest and the shortest, is the pacer's period when within 3% of it (at a 60 fps limit exactly one frame, every
frame), and repays the time the game was not given at up to a tenth of the step, so game time still follows the
clock. It is at least 1/480 s. step_steady = 0 gives the mean of five again. With trace = perf the fps lines show the
shortest and longest step and the time owed.

tests/frame_step_check.py drives frame_rate.c with made-up display times and the rest of the runtime stubbed.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 22:54:46 -05:00
chrg6
947d286b40 Leave the texture table's slots alone when a texture is released and taken straight back.
In a large town the game releases and takes back about 40,000 textures per 3,600 submissions. Each was a bump of
its address bucket, the fullest buckets (1,300 slots over one address) were bumped most, and the texture pool
refresh refilled about 6,000 slots per submission: it used up its 6 ms of a frame in about half the frames there,
which made the game CPU-bound (the GPU idle 10 ms a frame) and delayed new textures.
A take-back of the entry that was released, with no other change at its address since, now puts the bucket's
generation back to its value from before the release, so everything resolved then is current again. A bump takes
the generation after the highest the bucket ever had, so the value in between is never given to another state.
tex_gen_undo = 0 bumps as before. The pool line counts the take-backs that went back.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 22:23:00 -05:00
chrg6
a87f6e1bd6 Merge the test line's texture retirement fix into the combined branch.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 21:27:08 -05:00
chrg6
22103a57bf Merge main into the test line: the pull requests taken there and two render target fixes.
Main brought the fixes of eleven pull requests (the texture pool set sealed when an early replay part is submitted, every location reflected in interface arrays, RGB9E5 texels recognised for integer storage views, the upscaler a frame started with kept, GPU pass timestamps without vendor breadcrumbs, the Linux build, window and NGX fixes), render targets released when drawn over at another address, the vertex layout kept in the pipeline on newer AMD drivers, and the upscaler choice read once per evaluation.

Four hunks conflicted and take both sides: pool_sync returns for a sealed set before the per-frame creation budget's clock (vk_exec_draw.c); make_module keeps the test line's early_ok argument and main's module hash (vk_pipeline.c); a texture taken back counts as sampled again and records how long it was away, and the texture line logs the disuse counters and the overwritten render targets (vk_texture.c).

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 21:10:23 -05:00
chrg6
f1127f8be9 Retire textures evicted by disuse before freeing them, take them back on any use, and add tex_disuse = 2 to tell the freeing from the marks.
0.6.1.14 faulted the GPU (a read of an invalid address in a pass) about 30 seconds after its last disuse evictions, and
no path by which an evicted image is still read was found in the code. An evicted texture is now first retired: the
pool refresh gives its slots the stand-in while the image stays whole. It is destroyed only once the texture pool has
taken every set of its ring since and the GPU has finished the submissions recorded until then, so no pool set can
still be bound with its view. A mark on one of its slots or any lookup outside the pool refresh takes it back as it is,
and the perf line counts those, which shows whether the marks miss a real use. tex_disuse = 2 retires and never frees,
so the next fault can be put on the freeing or on the marks and stand-ins.

The registration shortcut also read a slot's cached entry without checking that the resolution was current, so it could
read the record of a destroyed texture; it now checks the slot's generation first.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 4c5b2ae2e030ab00a910d8f071c030e610fd78e1)
2026-11-09 21:09:33 -05:00
chrg6
57cdfa1520 Add wb_probe = 1, which finds out who reads what the GPU wrote back into guest memory.
Per-pass GPU timestamps put the write-back of GPU-written storage buffers at 3.6 to 5.3 ms of GPU time a frame in play, against 1.8 to 2.5 ms for all of the game's own passes and dispatches: about 67 MiB a frame goes from the mirrors back into guest memory, from the same eleven pools all session, in case the CPU or a host path reads it. Nothing said whether anything does.

With wb_probe = 1 the 2 MiB regions that lie wholly inside a range just written back are made inaccessible. The first read or write of such a region faults; the handler gives the region back the protection it had (read-only when frozen, else read-write), notes the address, the instruction and the thread, and the access runs again. The bytes are in guest memory all along, so nothing changes for the game. A log block every perf window gives the regions armed, the probes a read or a write ended, and the first accesses by instruction. Every thaw ends the probe of its region first, which covers file reads into guest memory and mapping changes; a file write from guest memory thaws its buffer while the probe is on; a probed region is not frozen anew.

The platform layer gets a hook for every read or write access fault beside the write-fault hook; it is installed only with the setting. --probe-gfx-abi checks that nothing is armed without it and, run with NX2NAVI_WB_PROBE=1, that reads and writes end a probe and run again, that a frozen region thaws after it and that mem_thaw ends and holds.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 21:01:47 -05:00
chrg6
c32b9c40a8 Send Ocarina 1.1.1's one-shot zstd decodes to the host decoder, switched on by zstd_native = 1 until a check run.
A profile of a play session showed the game's own zstd decoder, lifted from ARM64, taking 16 to 19% of all running CPU time on the loading threads: the patch set that sends decodes to the host's libzstd had sites for 1.4.3 only. recomp/patches-v111.txt now has the three calls of ZSTD_decompressMultiFrame (main+0xeb380) of this build, checked against its main by the generator; a lift with them changes three chunks. ov_zstd.c takes the guest function's address by game version.

The sites have not been through a check run on this build, and 1.4.3 has a caller that relies on the game decoder's own result, so on 1.1.1 the host function passes every call on to the game's decoder unless zstd_native = 1 is set or zstd_check = 1 runs both and logs what differs. The loading threads' stream feed (main+0xf5c80), which decodes most of the data, is not replaced yet.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 20:52:48 -05:00
Michael Schienbein
a103673341 Make the SDL window honour monitor, --monitor and --list-monitors.
On Linux the window ignored NX2NAVI_MONITOR (the log said it had no effect) and --list-monitors only printed that monitor selection is Win32-only. The SDL window now picks a monitor with the same rules as the Win32 one: auto (the system places it), primary, a 1-based index in listing order, or part of the monitor's name, ignoring case, the first match in list order winning. The monitors are SDL's displays; --list-monitors prints their index, name (the make and model, with the connector on Wayland and X11), pixel size and position, primary flag and display scale, then what NX2NAVI_MONITOR would pick, and the log says the same when the window opens.

The window is created centred on the chosen monitor and centred again at its final size, and that position also names the display the fullscreen setting covers, which is how a Wayland window, which a client cannot move, opens fullscreen on the chosen output. On Wayland a windowed window opens where the compositor puts it; the log says so once. With a chosen monitor, the size widescreen.c reads for fullscreen before the window exists is that monitor's.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-09 20:51:09 -05:00
chrg6
8e656b85a4 Hold less video memory in empty space: smaller VMA blocks, spare blocks only where textures grow, a smaller ASTC scratch, and DLSS features freed once unused, with a VRAM breakdown in the perf log.
VMA's blocks on large heaps are 64 MiB instead of 256 (vma_block_mb): one session held 2.1 GiB free inside the
device blocks beside 8.2 GiB of allocations after a few area changes, and the driver counts a block whole until it
empties. The headroom thread keeps its spare block only for the device-local types textures and mirrors grow in; the
spare blocks it made for the host types and the PCIe BAR type at boot stayed empty for the whole run. The ASTC
decoder's scratch is 32 MiB, so it stays inside a block, and an area load that makes one per upload batch holds half
as much at once. A DLSS feature no frame used for 3600 evaluations is freed with its work images, and a model change
now frees all five sizes.

The perf log gets a "vram by use" line (textures, released textures, mirrors, physical pools, ASTC scratch, headroom
spare, free space inside the blocks, memory outside VMA and DLSS's own share), the free ranges per memory type, the
addresses whose duplicate texture entries hold the most, and a line when memory outside VMA moves by 256 MiB.
astc_bc_probe in nx2navi.ini turns on the ASTC opacity probe.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 99cfc2fa14ae208b7b23e057ff9b87986cd6a5e0)
2026-11-09 14:56:17 -05:00
chrg6
860bc9cf0b Spread the texture pool's entry creation over frames by a per-frame time budget, and stop looking up the slots it left.
The pool refresh runs before every draw that binds the pools, so its count budget of 16 creations held per draw, not
per submission. An area load in the 0.6.1.12 test made 4,925 entries (1.7 GB of uploads) in one 430 ms frame, and
2,018 in a 195 ms one. While slots were left over, every draw walked the whole table and looked each of them up again,
about 100 ms of the 430 ms frame in key hashing alone.

Once a frame's refreshes have taken pool_create_ms (default 6 ms; 0: no limit), they create nothing more until the next
frame, and skip the slots left earlier in the frame. The first refresh of each frame keeps its count budget. The slots
left keep their stand-in for a few frames during a large load.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 14:51:29 -05:00
chrg6
dc9f164afc Evict textures no shader sampled for 30 seconds while video memory or the system's commit runs low.
The texture pool refresh looks up every registered slot, so the textures of every area the game keeps loaded never
counted as idle and their memory only grew. Marked shaders now store into a buffer with one word per pool slot. Every
four submissions that recorded work, the replay copies it out and clears it, and the texture side notes when each
texture was last sampled. Under VRAM pressure or low commit, once idle textures are gone, live textures that come back
intact and were not sampled for 1800 presents go too. Their keys are held, so the pool refresh keeps the stand-in until
a shader samples that slot again, and the next refresh makes the texture again.

Fragment shaders that neither discard nor write depth, sample mask, stencil reference or memory keep early depth tests
(EarlyFragmentTests), so the marks do not take away early depth rejection. Alpha to coverage leaves the dynamic state
while marks are on, so each pipeline knows whether early tests are safe. Disuse eviction waits until every module that
indexes the pool was marked and two reads arrived. NX2NAVI_TEX_DISUSE=0 (tex_disuse = 0) turns it off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 1a4c896150a748f9275c3024e96af3055db94af4)
2026-11-09 14:39:07 -05:00
chrg6
9bba578e58 Hold the game to 240 frames a second when the limit is unlimited or higher, which stops the quick menu's crash.
Ocarina steps its game by the clock, and the frame limiter let "unlimited" run free and took numbers up to 1000
(frame_rate.c LIMIT_FREE_MAX_HZ), on the belief that the game has no lower limit to its step. It has one: on the quick
menu, where a frame costs the GPU almost nothing, the game ran at 640 to 700 fps and after about two seconds read
address 0 in its own draw code (main+0x175b2a0), twice in a row with the same call stack, while 92 to 255 fps ran on.
The game now runs at most 240 frames a second, "unlimited", "display" and numbers included; with frame generation the
cap counts the game's own frames, so the generated ones still go above it on screen.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 13:15:37 -05:00
chrg6
a720ca879c Let NX2NAVI_GPA_TWIN_MAX_KB keep the device address table's second writes to small pools, to measure what the twins cost.
A shader's store or atomic through the table goes to a pool's VRAM mirror and again to its guest copy, which on a
discrete GPU crosses PCIe. On PCIe 3.0 (RTX 4090, Kokiri Forest, DLSS Quality) turning the twins off took the GPU from
16 to 13.1 ms a frame; the writes that went wrong without them were foliage counts and records in pools of 20 and
44 KiB. gpa_twin_max_kb = n gives a twin only to mirrors of pools up to n KiB. A larger mirror's record names the mirror
twice, so its second write goes to the table's scratch page, its buffer fills stay in VRAM (vk_mem_guest_twin), and it
is never evicted, since guest memory lacks what the shaders wrote into it. The mirror report counts the mirrors made
without a twin. Default 0: every mirror has one, as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 12:45:26 -05:00
chrg6
cb234fade1 With frame generation and no frame limit chosen, limit to the display's refresh rate.
Since the pacer divides the limit by frame generation's factor, the default limit of 60 held the game to 30, 20 or 15 rendered frames a second at 2x, 3x or 4x on any monitor, 15 at DLSS 4x on a 165 Hz one. While AMD's or NVIDIA's frame generation swapchain is in use and neither fps_limit nor the older fps60 = 0 is set, the limit is now the monitor's rate, as with fps_limit = display: 4x on 165 Hz draws about 41 and shows 165. A limit the player set is kept, and the menu's Frame rate limit row shows the display choice while this applies.

The mouse camera divided its input by the limit's frame ratio, which counts generated frames, so frame generation turned it faster by its factor; it now uses the rate the game draws at (frame_step_game_hz).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 12:18:17 -05:00
chrg6
c745a9ef2f Offer DLSS multi frame generation at 2x, 3x and 4x.
framegen_multiplier (2, 3 or 4, live) sets how many frames the display gets per rendered frame while NVIDIA DLSS frame generation runs, and a DLSS multiplier row under Frame generation in the Screen tab sets it. nx2navi_dlssg.dll now passes that count to Streamline and reports the GPU's limit (numFramesToGenerateMax) through a new optional export, nx2sl_frames_max; with an older DLL the game keeps to 2x. A value above the limit is clamped to it with a log line, and the menu lists only what the GPU and driver allow, with a note saying why the rest are missing. The Frame generation row now says "in use: off" and why when DLSS frame generation was set but does not run.

The pacer divides the frame limit by the multiplier in effect, as it already halved it for FSR 3.1, so the display gets the limit and VSync at the display's rate drops no generated frames; RivaTuner Statistics Server stays out while DLSS frame generation runs, since it counts generated frames. With DLSS 2x a limit of 60 now shows 60 on screen instead of 120.

nx2navi_dlssg.dll has to be rebuilt (tools/build_dlssg.py) for 3x and 4x.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 12:18:17 -05:00
chrg6
66927b8f94 Ask every driver but NVIDIA's to keep NaN and infinity in the game's shaders, which should bring Navi's orb back on AMD GPUs.
The game's shaders rely on IEEE NaN and infinity results: unordered comparisons compile to x > c || isnan(x), a
zero-length normalisation gives an infinity that a later test catches, integer masks travel through float selects,
and the translator's own NaN guards are isnan tests. Our SPIR-V never declared SignedZeroInfNanPreserve, which lets a
driver assume floats are never NaN or infinite. NVIDIA's driver keeps the IEEE results anyway; AMD's compilers do not
(issue #156: a NaN-bit select read as a signed integer gave 2^32; #41 and #110: black and white blocks on Navi and on
Link next to her). The player report: AMD GPUs draw Navi's sparkles but not her orb, whose light sits at her own
centre.

vk_pipeline.c spirv_nan_preserve now adds the capability, SPV_KHR_float_controls and the mode for 32-bit floats (16
and 64 where the module declares them and the driver can) to every game shader module. NX2NAVI_VK_NAN_PRESERVE: unset
on every driver except NVIDIA's own, 1 everywhere, 0 off. --selftest checks the rewrite; the rewritten modules of 600
translated game shaders pass spirv-val for Vulkan 1.3. Not yet seen on an AMD GPU.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 11:17:08 -05:00
chrg6
91acff672c Stop calling RTSS's EnumProfiles, which crashed the game at start where RivaTuner Statistics Server runs.
EnumProfiles walks RTSS's Profiles\*.cfg with _findfirst and _findnext and keeps the find handle in 32 bits. The handle
points into the process heap, which lies above 4 GB here because the guest address space takes the low part (memory.c
mem_init), so _findnext gets a cut pointer and faults in ntdll: the crash report then ends the game with code 71 before
the title screen (issue #231). rtss_limit.c profile_exists now looks for Profiles\<name>.cfg in RTSS's folder, which is
what EnumProfiles reports. NX2NAVI_RTSS_ENUM=1 calls EnumProfiles again, to test an RTSS that keeps the whole handle.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 11:22:38 -05:00
chrg6
7db0c5c75b Keep the crash report's exception filter in place, and write the game's exit code into its log from the launcher.
The last-chance exception filter is set at the start, before the GPU driver and the other DLLs load. A DLL that sets
its own filter later takes its place, and a fault in that DLL then ends the game with no FATAL line in the log. Two
0.6.0 logs from an RX 7800 XT end that way on the title screen. Once a second the filter is now put back and the
module that replaced it is logged (NX2NAVI_CRASH_FILTER_GUARD, default 1). When the game ends with a nonzero code,
the launcher adds that code, in hex with its meaning, to the end of logs\nx2navi.log, so a fail-fast exit that no
handler in the process can see still shows in the log a player sends.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 11:22:37 -05:00
chrg6
10ea0a2eb2 Keep serving the previous translator's shader translations after a translator update, and translate them again in the background.
Every shader cache key names the translator, so a release with a new translator had no cached translation at all:
the launcher re-translated about 42,000 programs before play, and play waited for any program not prepared.

The cache now lists the translator identities it holds translations of in shader-cache/identities.txt, newest first.
A shader the current translator has no translation of uses a previous one's, looked up with that identity mixed with
this machine's host options and read with the usual checks; it keeps that translation for the rest of the session, so
no pipeline is built twice. After the boot prewarm a background pass translates every stored input that has a previous
translator's entry again under the current one, on its own translator child at idle priority that waits while the
game translates. A program the new translator refuses keeps its old translation and is logged. Once the pass has gone
through every such input, the old entries of what it covered are dropped: loose files are deleted, and a pruned copy
of shader-cache.pack replaces the pack at the next start when the pack is still the one it was copied from.
--prepare-shaders still translates everything under the current translator. NX2NAVI_SHADER_CARRY=0 keeps the earlier
behaviour.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 10:42:36 -05:00
chrg6
0223d88520 Turn NX2NAVI_SPLIT_IDLE off by default: it made the foliage flicker.
Tested in the 0.6.1 test build (RTX 5090, Kokiri Forest), switching the frame rate changes off in turn: the foliage
flickered with split_idle on alone and not with it off, with render target image reuse on either way. split_idle sends
a submission's first part to the GPU at the first pass boundary after a draw or dispatch while the GPU is idle,
without the usual draw and time minimums; why parts cut that early make the foliage flicker is not known yet.
The settings file's two stacked descriptions of the split settings, left by the merge, are one again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 10:42:36 -05:00
chrg6
0101a87079 Raise the frame rate: fewer copies into the VRAM mirrors, earlier GPU starts, render target images reused.
From the local fixes package (fix 11), measured in Kokiri Forest at 4K on an RTX 4090 over PCIe 3.0: 40.5 to 62.6 fps
native and 45.6 to 74.9 fps with DLSS Quality, the mirror copies from 6.5 to 0.3 ms of GPU time a frame.
- Pages a VRAM mirror wrote back into guest memory are not copied up into it again: the mirror sync reads page stamps
  of their own that a mirror's write-back leaves alone (vk_gpu_written_back, decided at record time by
  vk_mem_mirrored). This replaces the lookup table NX2NAVI_WB_NO_REUP had, keeps its name, and is now on by default.
- The game's flushes of mirrored memory are not copied where the write watch covers the region, as every page the game
  wrote there is stamped already (47-57 MiB a frame); NX2NAVI_FLUSH_UPLOAD=1 copies them as before.
- Written storage ranges up to NX2NAVI_WB_MERGE_MAX (now 32 MiB) are merged in 4 MiB pieces, so a range is no longer
  bound to what one dispatch covers; the snapshot pool keeps its budget-scaled size with 128 slots.
- A submission's first part goes to the GPU at the first pass boundary while the GPU is idle (split_idle), long passes
  are split too (split_in_pass), and the part's time limit reads the clock less often.
- A render target that needs an image of its own takes the image of a released one with the same parameters, released
  two or more frames before (tex_reuse); memory requirements are kept per parameter set; a released entry another
  descriptor's entry replaced at its address is kept and taken back.
- The memory check reads a page's write-watch bit and stamp under the lock that keeps them together.
- The launcher reads the gamepad only while its own window is in front, and does not start a second copy of the game.
- make_game.py says why a Python package did not load, not only that it is missing.
The fix's per-pass GPU timing is left out: NX2NAVI_GPU_PASSES does the same in main.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 09:55:25 -05:00
chrg6
dfc5b90b59 Fix what the 0.6.0 review found, and ship DLSS Frame Generation in the launcher release.
The commit census of the perf trace walked the address space on the presenting thread outside mem_census, which
brought back the hitch mem_census was added to remove; it now runs only with mem_census = 1. DLSS's output pass at
the mode's share fell back to no pass at all when the scene was not at that share (the first presents, a dynamic
resolution step): after such a frame the first pass wider than the scene is taken again for 120 frames. The launcher's
nx2navi.ini editor no longer rewrites a file it cannot read, keeps the byte order mark and bytes that are not UTF-8,
reads an empty line as the game does, and leaves no temporary file behind. The build kit carries the two modules
build_game.py imports on Linux, the Linux steps list the right packages and Python, and stale comments and notes are
corrected (Discord on by default, two prebuild threads, Enhanced HDR gone).

DLSS Frame Generation needs nx2navi_dlssg.dll, NVIDIA Streamline's runtime and nvngx_dlssg.dll beside the game, which
no release carried, so the menu offered it and the game turned it off. tools/make_launcher.py --dlssg and --streamline
put them with their licences and a notice in the release's bin/dlssg/, and tools/make_game.py place_dlssg copies the
whole set beside the game. THIRD_PARTY_NOTICES.md has the row; the notes and README say RTX 40 and 50.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 09:10:36 -05:00
chrg6
f00f464e9f Turn Discord Rich Presence on by default.
It talks only to a Discord client running on the same PC and does nothing without one; discord_rpc = 0, the Game tab
of the settings menu or the launcher's Discord Status row turns it off. The launcher's row reads an empty or missing
value as on, as the game does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:51:57 -05:00
chrg6
7fc21407c3 Bring back the switch for Discord Rich Presence, in the game's Game tab and in the launcher's Settings.
The presence is off by default and its only switch was a row of the settings menu's Menu tab, which the Ocarina menu
left out, so it could be turned on only by editing nx2navi.ini. The row is in the Game tab now, and the launcher's
Settings has a Discord Status row that writes discord_rpc to the game's nx2navi.ini (launcher/gameini.py, which
reads the file as runtime/cfg.c does and changes only the line it sets). The connection itself works: the installed
game's --probe-discord connects and sets the status.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:51:07 -05:00
itaskaev2
553067ea0b Walk the process's address space for the memory census only when mem_census asks for it.
With trace = perf, every 600 frames heap_log started a thread that walks the whole address space with VirtualQuery
(plat_mem_census) for the "mem: process" line. The walk takes 100-240 ms, and though it runs on its own thread it
holds the process's address-space lock, which the game's threads take at every page fault and VirtualAlloc: the
present after each walk arrived 65-120 ms late, a hitch every ten seconds in every run with the trace on, and the
runs people attach to issues carried it. The walk now runs only with mem_census = 1 (NX2NAVI_MEM_CENSUS); the rest of
the memory lines stay.

Kokiri Forest, trace = perf: before, "slow frame" lines at 601, 1201, 1801, 2401 and 3002 of 65-120 ms with nothing
of it in the pipeline, texture or fence columns; after, none at those frames.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:25:33 -05:00
itaskaev2
03e6dac0be Read a target's render history without collisions and over four frames, and offer a per-frame budget for one-shot pipeline waits.
The target history is now four-way set-associative and counts a target as recent when one of the last four frames
rendered it, so the scene passes, probe layers and alternating effect mips no longer read as never rendered and wait
for their pipelines one at a time when a new area is entered. NX2NAVI_ONESHOT_BUDGET=1 makes one-shot draws share a
wait budget per presented frame (100 ms for large passes, 300 ms for small ones) instead of waiting up to
ONESHOT_WAIT_MS each; it is off by default until play shows no target left empty that way.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:25:21 -05:00
chrg6
01deaa95d6 Show the library prebuild's new default of two threads in nx2navi.ini.example.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:22:11 -05:00
FemOrWhat
844940c6fb Add DualShock 3 support on Windows, read straight from the controller when no driver presents it, off by default.
runtime/input_ds3_win.c finds a DualShock 3 through hid.dll and setupapi (loaded at run time), sends it the command
that makes it report, sets its first player light and decodes its reports (runtime/input_ds3.c, tested by
tests/ds3_check) into the pad state, with rumble through its light motor. input.c follows whichever pad was pressed
last when an SDL pad is connected too. ds3 = 1 in nx2navi.ini turns it on: it starts a scan for the controller every
three seconds and opens it read-write, so it stays off unless a player asks for it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:21:07 -05:00
chrg6
acdf1711b9 Let microphone = 0 refuse the game's input streams, and give the microphone code a neutral device name.
The input-stream overrides open the default recording device whenever the game asks. The setting keeps the earlier
refusal available, the stream-purge crash fix holds either way, the device name and log lines no longer say Windows on
every platform, and the error result is named.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:19:55 -05:00
chrg6
837926d8e1 Let shader_cache_flush = 1 flush the shader cache files to the disk again.
The faster cache writes leave the .spv, .res.json and .use files unflushed and rely on the checks every read makes. The
setting puts the earlier flushed, written-through writes back for a drive or setup where a torn file shows up.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:19:13 -05:00