Commit Graph

59 Commits

Author SHA1 Message Date
chrg6
4af930d0c2 Ask for the disk space the build really needs, and say how long an install really takes.
The launcher asked for 31 GB where the build's own check now asks for about 34, so a disk between the two passed the first check and was refused seconds later. Both say 34 GB now. The build no longer asks for the whole shader preparation's space when the game folder already holds translations. The texts said 10 to 25 minutes for an install that took players 27 to 41, and 5 GB for a build cache that measures 1.6. A build error's message goes into the launcher's log as one line.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 16:12:52 -05:00
chrg6
92e3cc0adb Merge the launcher fixes: updates that stop keep the game, honest progress and errors, and a faster file check.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 16:08:15 -05:00
chrg6
856944002e Hold repeated update checks back, and say when GitHub takes them again.
Every selection of the Updates row started a request to GitHub, which
allows an address 60 an hour: a player who selected it 25 times in 90
seconds had every check of the next hour refused. The row and F5 now
start no check within a minute of the last one.

A refused check said "try again in an hour" whatever the answer held. It
now names the time from the answer's X-RateLimit-Reset or Retry-After.
A failed check wrote two tracebacks, 22 lines, into launcher.log each
time; a FeedError is now one line with its message and its cause.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 15:36:20 -05:00
chrg6
61432c3295 Keep reading the build's output when a handler fails.
build.Run read the build's output on a thread that ended on the first
exception of a line or event handler, such as the launcher's log on a
full disk. Nobody read the pipe after that, the build stopped at its next
line once the pipe was full, and the job waited for it for good. The
thread now counts the line as dropped and reads on, and Context.log loses
a line it cannot write instead of raising.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 15:34:05 -05:00
chrg6
ef30a23969 Run the build below normal priority.
The build compiles on every processor for ten minutes and more while the
job screen invites the player to keep using the PC. build.Run now starts
make_game.py with Windows' below-normal priority class, which the
compilers and the other processes the build starts take over from it, so
the build gives way to what the player does and loses nothing on an idle
PC.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 15:32:48 -05:00
chrg6
55c7c0f7f2 Show the game's FATAL line when it ends with code 70 or 71.
The game exits with 70 after a FATAL line of its own and with 71 after
its crash report, and the launcher said only that the line near the end
of the game's log names the error. It now reads the last FATAL line of
the run from logs\nx2navi.log and puts it into the home screen's message
and into launcher.log, so a launcher log a player sends says what the
error was.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 15:29:30 -05:00
chrg6
18a86dd652 Show what the check of the game files found.
The check printed its counts into the build's lines only, so a player
whose build ended with "4 damaged, 3 given a stand-in, 1 left as they
are" saw nothing of it. A job now reads romfs-check.json after the build:
the count goes into the step's row, and when the check ran in that job, a
sentence goes onto the home screen and into launcher.log.

The same four files are flagged on every copy of the game, and three of
them get a stand-in. For those the sentence says so and that nothing
needs doing; other files are counted and romfs-check.json is named.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 15:27:55 -05:00
chrg6
752c172ccf Say how long an update really takes, and fill the warm-up's bar from zero.
The Updates row promised that an update rebuilds the game "in a few
minutes". The code cannot keep that: a version that changes the lifter
compiles the game's code again, and one that changes what the shaders are
built with builds all of them into the driver's cache again. Players'
updates took 24, 34 and 45 minutes. The row now says it takes a few
minutes when little changed and half an hour or more otherwise.

The warm-up of the driver's cache after an update only builds, but its
count was drawn in the second half of the bar as in a full preparation,
so a 20 minute run read 50 % in its first second. Its count now fills the
whole bar, and the row says so while the shader cache is packed before it.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 15:22:48 -05:00
chrg6
31256a5015 Merge branch 'claude/pr-intake-4-947f9e' into test-all-fixes 2026-11-10 15:22:06 -05:00
chrg6
6e38458f77 Remove a cut RomFS image before measuring the free space.
A RomFS step that was cut short (Cancel, a full disk, a power cut) leaves
romfs.bin.part, up to 26 GB. The next run writes the image anew, but
make_game.py's step_romfs and the launcher's Begin Installation measured
the free space first, with that file counted as used: on a nearly full
disk the retry was refused although it needs no more room than the first
try. Both remove the file before they measure, and the first-run screen
counts its size as free.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 15:15:35 -05:00
chrg6
e69a84fe59 Roll a version that cannot start back without waiting for a click.
start.pyw showed the import failure in a message box before it ended with
code 86, and the stub waits six seconds for that code: unless the player
closed the box in time, the broken version stayed the current one. When
app/previous.txt names another complete release, the failure now goes to
crash.log only and the process ends at once, so the stub rolls back and
the previous version says on its home screen which version did not start.
The box stays when there is nothing to go back to, when Steam started the
launcher without the stub, and when the stub's wait is already over.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 15:13:40 -05:00
chrg6
88495c296c Keep the game installed when an update stops in the compile.
An update whose lift ran again drops the compile step's record before the
compile runs, so a compile that then stopped left state.json without it,
build.built_version said '' and the launcher's next start showed the
first-run screen and asked for the dump. build.installed now also counts a
folder that holds the exe of the build before and game files a rebuild can
start from: the window opens on home, where Rebuild the Game reads "Not
Finished" and Play says which build it starts, and an update's rebuild and
the command line's go on with the game. Begin Installation into a folder
whose game files are already unpacked builds on from them instead of
reading the dump again.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 15:11:06 -05:00
chrg6
006bdfa4b2 Let the launcher's bug report export write the game's log and settings when the game has no save yet.
A game that stops before its first save is the one its player most wants to report, and Export Save refused it: "the game has no save yet". With Add Log and Settings on (the default) the launcher now writes NX2navi-log-<date>_<time>-bug-report.zip with the game's latest log, nx2navi.ini and a manifest that counts no save files, and says so on the Saves screen. Without a log there is still nothing to export, an export without the log and settings still needs a save, no account is made for the export, and an import refuses such a zip as one without a save.

This is the first of the two faults pull request #364 names, written anew inside the existing export; its Export Diagnostics screen and its separate crash log are not taken.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 14:52:13 -05:00
chrg6
e8f5f8e01e Merge branch 'main' of https://github.com/tangerineturtle1/NX2navi into test-all-fixes
# Conflicts:
#	runtime/cfg.c
2026-11-10 14:27:47 -05:00
epicmeme546
a7b8810d37 Add the game to Steam from Customize Launcher, with Navi as its icon and the title screen's moonlit field and logo as its pictures, made from the player's own game.
The new row, Add to Steam (Windows), puts a non-Steam shortcut named "The Legend of Zelda Ocarina of Time" into the shortcuts.vdf of every Steam account that signed in on the PC (launcher/steam.py): the binary key-value file is read and written back as it was, with ours added or updated in place, and the file from before the first change kept beside it. Steam reads that file only at its start and writes it back when it closes, so a running Steam is asked to close (-shutdown) and started again after.

The pictures come from the player's game when the row is selected (launcher/gameart.py), as the launcher's fonts and sounds do: Navi from the HUD's icon and its glow, the logo with the Master Sword and the Hylian Shield from the title screen's texture archive (decoded with runtime/tex_astc.c, built into a library with the toolchain's clang), and a frame 12 seconds into the first title movie, the field under the full moon, decoded from its AV1 with the toolchain's dav1d.exe, as the background, the cover and the wide tile. They go into config/grid named by the shortcut's id, CRC-32 of Exe and AppName with the top bit set, which matches the id Steam gave an existing shortcut on the test PC.

Steam starts the launcher's pythonw.exe on data/steam_play.pyw, which runs the launcher of app/current.txt with the new --play: the game starts from its folder with its console hidden, as Play starts it, and the process waits for it and for the copies its own Restart starts, so Steam counts the game as running while it is. ocarina.exe is a console program, so starting it directly would open a console window beside the game, and NX2navi.exe ends six seconds after it started the launcher. Started that way on an RX 7900 XT PC, the game ran, the Python process stayed until the game was closed and ended with code 0. Tested against copies of that PC's Steam files; the real Steam library is not changed until the player selects the row.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 13:49:06 -05:00
chrg6
fd22aab8d4 Let the launcher replace a cached font file it has registered.
A font file registered with Windows stays open, so writing it failed with Permission denied. When the cached title font was registered but its family could not be used, every start tried to decode it again, failed on the locked file and kept the system font. The registration is now given up before the fonts are decoded again, and an unchanged file is not rewritten.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 12:31:22 -05:00
chrg6
75b0dca907 Add Steam Deck button prompts beside the Xbox and PlayStation ones (prompts = steamdeck).
The Controls tab's Button prompts row and nx2navi.ini take steamdeck: the Deck's own labels in the game's
text, action prompt and ocarina notes, which are A B X Y where an Xbox pad has them, L1 R1 L2 R2 and L3 R3,
Menu and View. The style is drawn by tools/pad_prompts.py like the others, into romfs-patches-steamdeck
and romfs-patches-steamdeck-label, and every build with button art writes them.

Pull request #107 by loteran asked for PlayStation and Steam Deck prompts; it was closed, and the tree
took the PlayStation half in another form, drawn from button art instead of redrawn font glyphs. This is
the Steam Deck half in that form, written here: the art has no Deck style, so its entry in
tools/prompt_art.py names the Xbox pictures for the face buttons, Menu, View, the d-pad and the sticks
and the PlayStation pictures for the shoulders and stick clicks. It needs four pictures of the Xbox set
that no other style used (the white letters on a light button, for the ocarina's notes); a release made
with --prompt-art copies them with the rest.

The Windows files compile and tests/launcher_test.py passes, with the prompts step's test following the
number of folders (seven now); every picture the style names is in the art used for releases. The style
was not drawn here (that needs the game's font), and --probe-cfg, which has a new check, was not run.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 06:53:30 -05:00
chrg6
fa29f3fea5 Merge the second PR intake pass: anisotropic filtering in the Screen tab, the X3D die choice, the NVIDIA shader cache limit, the NGX core search and other fixes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 03:32:46 -05:00
epicmeme546
ddc4d92812 Give the launcher's colour schemes plain names.
The six schemes were named after places in the game. They are now Forest, Volcano, Lake, Desert, Temple and Shadow, in the same order and colours, and their ids in launcher.json follow (forest is the default). A launcher.json that names one of the old ids gets the default scheme, as with any name it does not know.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 02:05:21 -05:00
epicmeme546
5f4bbd2084 Play the launcher's sounds at Low by default.
A new launcher.json starts with sounds at low instead of off, and a value the file cannot hold falls back to low too (launcher/ui/sound.py DEFAULT_LEVEL). The player can still pick Off, Medium or High in Customize Launcher. The sounds are still only the game's select and back sounds, read from the player's own game.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 02:02:45 -05:00
DeepDaddyTTV
da303e830d Retry launcher downloads when the response ends early. 2026-11-10 01:55:29 -05:00
epicmeme546
8d91667c28 Keep only the game's select and back sounds in the launcher, and make none of its own.
The cursor's sound played at every move of the pointer and cut the other two short, as one sound plays at a time: it is gone, and moving the cursor is silent. A choice, a changed switch, Play and the end of a build play the game's decide sound; going back and a failure play its cancel sound. The chimes the launcher made from sine tones are removed too, so every sound it plays is decoded from the player's own game into data/cache/sounds and it is silent until the game has been read. No sound file is in the repository, the release or the setup.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 00:44:36 -05:00
epicmeme546
158ba315d5 Play the game's own cursor, select and back sounds in the launcher.
The launcher's sound effects were chimes made from sine tones. They are now the game's interface sounds, the ones its menus make for the cursor, a choice and going back: SE_Sys_Cursor00, SE_Sys_Do00 and SE_Sys_Cancel00, the files the in-game menu plays. The launcher decodes them from the player's built game or dump into data/cache/sounds (gamefiles.extract_sounds, a BWAV reader for PCM16 and DSP-ADPCM), beside the font it already reads that way, so no sound ships. The chimes stand in until the game has been read. The cursor's sound is a little under the others, as in the game's menu, and is left out for a quarter of a second after a choice, since one sound plays at a time and the pointer landing on a row of the next screen would cut the choice's sound short. Sounds stay off until the player picks a loudness.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 00:21:31 -05:00
epicmeme546
44d4095094 Add Customize Launcher: colour schemes, a background picture of the player's own, animations and sound effects.
The launcher's home screen has a Customize Launcher row. Color Scheme steps through six schemes (Kokiri Forest, the colours so far, Death Mountain, Zora's Domain, Gerudo Valley, Temple of Time and Shadow Temple): each is the first scheme with its woods, accents, backdrop and glow turned to other hues, so all keep the same light and dark steps and the same text. Background takes a picture file, cuts it to the window's shape and keeps a fitted copy in data/background.npy; Background Dimming darkens it and the panels turn a little see-through over it. Animations (on by default) make the cursor glide between rows, a new screen slide in, sparks drift over the backdrop and Navi bob in the title band; they move by the time that passed and stand still while the window is hidden. Sounds are short chimes made from sine tones, off until the player picks a loudness.

Redrawing in another scheme takes about a third of a second: the blurred masks and the noise, which no colour changes, are kept, and compositing onto a solid picture is a plain mix.

The selftest's screen capture passed window handles as plain ints, which failed for a handle above 2^31 and left some screens without their picture; its calls are typed now.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 23:27:02 -05:00
chrg6
524cd23266 Merge the save export and import for bug reports into the test line.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 21:11:18 -05:00
chrg6
52cf976857 Merge the 0.6.1 fixes from the 0.6.1.x test builds.
This brings in the test branch up to the shader reads, not the texture eviction by disuse still in progress there:
- black frames: a released or taken-back texture keeps its content, and a new texture over a live one of another size gets the region both cover;
- the menu font atlas uploaded through the runtime's checked upload batch;
- the game held to 240 frames a second, which stops the quick menu's crash;
- the FSR 3.1 contexts evicted instead of turning FSR off after a few render scales;
- AMD frame generation kept off while NVIDIA's holds the device;
- less device memory held that only costs the system's commit;
- shaders read from the disk cache off the render thread past a small budget;
- the exit code 70 text;
- pull requests #260, #261, #270 and #271.
The tool lists in make_kit.py and make_launcher.py and the setting names in cfg.c take both sides: romfs_check.py and pack_shader_cache.py, FOG_CULL, SCENE_SHARE and GPA_TWIN_MAX_KB.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 14:39:51 -05:00
epicmeme546
91003c3227 Check every player's game files during setup, and stand in for damaged textures.
A dump can hold files whose first pages are zeros, with a container checksum that passes because the damage was packed along with them. The game then opens such a file over and over and gives up on whatever needs it: one damaged normal map left the Great Fairy Fountain without walls.

The game build's new last step, tools/romfs_check.py, decompresses every file of the game data once, in worker threads and never while the game runs, and writes romfs-check.json beside the game. A damaged texture gets a stand-in, an undamaged texture of the same kind renamed to it, in an ordinary mod folder the Mods menu can turn off, so the game can load what needs it. Other damaged files are reported, since only a clean dump restores them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 14:16:19 -05:00
chrg6
b2074499de Let players export their save into one zip for a bug report and import a save someone shared, in the launcher and in the game's menu.
The launcher's home has a Saves screen: Export Save writes NX2navi-save-<date>_<time>.zip into Downloads (or a chosen folder) with a manifest, the save the game would load next and, for a bug report, the game's latest log and nx2navi.ini, never a key file; Import a Save checks a zip's manifest, game, paths and CRCs, backs the current save up into the saves folder and replaces it while the game is not running. The game's Game tab has the same exports and an import that waits in profile/save-import and becomes the save at the next start, since the running game would write its progress back over a save replaced under it.

The zip code (runtime/save_zip.c) and the import at start are checked without game files by tests/save_zip_check.py and tests/save_share_check.py; the launcher side by its test suite.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 13:13:43 -05:00
chrg6
c29d1b8dbd Name exit code 70 for what it mostly is: a fatal error the game wrote to its log, often memory that ran out.
The launcher told players that code 70 meant the game could not start itself again. The game exits with 70 after any
FATAL line of its own (runtime/dispatch.c rt_fatal), most often an allocation that failed when the memory ran out;
a failed re-run of itself (plat_reexec) is the rare case. A 0.6.1 player on a 16 GB laptop got the old text three
times, which pointed away from the log line that says what happened.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 12:45:14 -05:00
chrg6
7db0c5c75b Keep the crash report's exception filter in place, and write the game's exit code into its log from the launcher.
The last-chance exception filter is set at the start, before the GPU driver and the other DLLs load. A DLL that sets
its own filter later takes its place, and a fault in that DLL then ends the game with no FATAL line in the log. Two
0.6.0 logs from an RX 7800 XT end that way on the title screen. Once a second the filter is now put back and the
module that replaced it is logged (NX2NAVI_CRASH_FILTER_GUARD, default 1). When the game ends with a nonzero code,
the launcher adds that code, in hex with its meaning, to the end of logs\nx2navi.log, so a fail-fast exit that no
handler in the process can see still shows in the log a player sends.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 11:22:37 -05:00
chrg6
0f1847d243 Retry a cut connection when the launcher reads a small file, as downloads already do.
net.get_bytes and get_json, which read the release feed, the package databases and the package index, gave up on the
first network error, so one connection reset (WinError 10054) during Gather Build Tools ended an install (#237). A cut
connection, a timeout or a server error (5xx, 429) is now tried again after 1 and 2 seconds; a refused certificate or
another HTTP error still fails at once.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 10:57:10 -05:00
chrg6
fa1a2250b5 Let Rebuild the Game compile the game's code for this processor's level, and updates keep the compiled level.
make_game.py --rebuild keeps the level the objects were compiled for (lifted_level), so an update compiles only what
changed; --retune compiles for this processor's level. RebuildJob passes it, ContinueUpdateJob does not.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 10:42:36 -05:00
chrg6
cd20bdf09f Download and stage updates in the background, and install them only when the game is not running.
A check that finds a newer release (at start, then hourly while the launcher runs, also hidden during play) stages
it on a background-priority thread: the app into app/<version>, a new Python into app/<version>/python.staged rather
than python.next (which the stub would swap in under the running version), and staged.json written last to mark it
complete. Nothing is switched and nothing restarts. A failed staging is logged and tried again after the next check.

The staged release installs, through the existing switch, restart and ContinueUpdateJob path, when the launcher
starts and right after the game exits, never while a copy of the game runs. Install Updates Automatically (on by
default) can leave it to the Updates row instead. A version the stub rolled back from is not staged or installed by
itself again, prune keeps a staged release, and the Settings rows now fit the window with the new toggle.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 10:42:36 -05:00
epicmeme546
26be3f9c3c Keep the launcher hidden through the game's own Restart.
The game's Restart ends the process the launcher started and starts another. The launcher took that for the game ending: it came back over the game and forgot a game was running, so its Play could start a second copy.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 10:12:45 -05:00
chrg6
0101a87079 Raise the frame rate: fewer copies into the VRAM mirrors, earlier GPU starts, render target images reused.
From the local fixes package (fix 11), measured in Kokiri Forest at 4K on an RTX 4090 over PCIe 3.0: 40.5 to 62.6 fps
native and 45.6 to 74.9 fps with DLSS Quality, the mirror copies from 6.5 to 0.3 ms of GPU time a frame.
- Pages a VRAM mirror wrote back into guest memory are not copied up into it again: the mirror sync reads page stamps
  of their own that a mirror's write-back leaves alone (vk_gpu_written_back, decided at record time by
  vk_mem_mirrored). This replaces the lookup table NX2NAVI_WB_NO_REUP had, keeps its name, and is now on by default.
- The game's flushes of mirrored memory are not copied where the write watch covers the region, as every page the game
  wrote there is stamped already (47-57 MiB a frame); NX2NAVI_FLUSH_UPLOAD=1 copies them as before.
- Written storage ranges up to NX2NAVI_WB_MERGE_MAX (now 32 MiB) are merged in 4 MiB pieces, so a range is no longer
  bound to what one dispatch covers; the snapshot pool keeps its budget-scaled size with 128 slots.
- A submission's first part goes to the GPU at the first pass boundary while the GPU is idle (split_idle), long passes
  are split too (split_in_pass), and the part's time limit reads the clock less often.
- A render target that needs an image of its own takes the image of a released one with the same parameters, released
  two or more frames before (tex_reuse); memory requirements are kept per parameter set; a released entry another
  descriptor's entry replaced at its address is kept and taken back.
- The memory check reads a page's write-watch bit and stamp under the lock that keeps them together.
- The launcher reads the gamepad only while its own window is in front, and does not start a second copy of the game.
- make_game.py says why a Python package did not load, not only that it is missing.
The fix's per-pass GPU timing is left out: NX2NAVI_GPU_PASSES does the same in main.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 09:55:25 -05:00
chrg6
dfc5b90b59 Fix what the 0.6.0 review found, and ship DLSS Frame Generation in the launcher release.
The commit census of the perf trace walked the address space on the presenting thread outside mem_census, which
brought back the hitch mem_census was added to remove; it now runs only with mem_census = 1. DLSS's output pass at
the mode's share fell back to no pass at all when the scene was not at that share (the first presents, a dynamic
resolution step): after such a frame the first pass wider than the scene is taken again for 120 frames. The launcher's
nx2navi.ini editor no longer rewrites a file it cannot read, keeps the byte order mark and bytes that are not UTF-8,
reads an empty line as the game does, and leaves no temporary file behind. The build kit carries the two modules
build_game.py imports on Linux, the Linux steps list the right packages and Python, and stale comments and notes are
corrected (Discord on by default, two prebuild threads, Enhanced HDR gone).

DLSS Frame Generation needs nx2navi_dlssg.dll, NVIDIA Streamline's runtime and nvngx_dlssg.dll beside the game, which
no release carried, so the menu offered it and the game turned it off. tools/make_launcher.py --dlssg and --streamline
put them with their licences and a notice in the release's bin/dlssg/, and tools/make_game.py place_dlssg copies the
whole set beside the game. THIRD_PARTY_NOTICES.md has the row; the notes and README say RTX 40 and 50.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 09:10:36 -05:00
chrg6
43ac4b6b03 Show Navi as the game's icon, and start the game from the launcher without an empty console window.
runtime/nx2navi.ico (the game window's title bar, taskbar button and Alt+Tab icon) is now the launcher's Navi, written
from launcher/ui/art.py navi_ico at the same ten sizes, in place of the Triforce. ocarina.exe is a console program
and the launcher has none, so Windows opened a console window titled with the exe's path beside the game;
winsys.start_game now passes CREATE_NO_WINDOW.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:54:25 -05:00
chrg6
f00f464e9f Turn Discord Rich Presence on by default.
It talks only to a Discord client running on the same PC and does nothing without one; discord_rpc = 0, the Game tab
of the settings menu or the launcher's Discord Status row turns it off. The launcher's row reads an empty or missing
value as on, as the game does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:51:57 -05:00
chrg6
7fc21407c3 Bring back the switch for Discord Rich Presence, in the game's Game tab and in the launcher's Settings.
The presence is off by default and its only switch was a row of the settings menu's Menu tab, which the Ocarina menu
left out, so it could be turned on only by editing nx2navi.ini. The row is in the Game tab now, and the launcher's
Settings has a Discord Status row that writes discord_rpc to the game's nx2navi.ini (launcher/gameini.py, which
reads the file as runtime/cfg.c does and changes only the line it sets). The connection itself works: the installed
game's --probe-discord connects and sets the status.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:51:07 -05:00
chrg6
8e30ad7927 Carry the button art in releases and draw the button prompts during the game build.
make_launcher.py and make_kit.py take --prompt-art (folders holding XGamepad, P5Gamepad and Keyboard_Mouse, or those
folders) and copy only the pictures pad_prompts.py reads into the release's prompt-art folder; tools/prompt_art.py
holds the art tables and that list, with no imaging packages. make_game.py's new last step, prompts, runs
pad_prompts.py on that art into the game folder's romfs-patches-* folders. Its key names everything it reads (the
RomFS, the art, the tools, the bind_ lines of nx2navi.ini, the folders being there), so it runs again only when one of
those changed, and it makes no other step run. A kit without art skips it. The launcher's Python gets fonttools and
pillow, and its jobs show a Draw the Button Prompts row when the version has art.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:09:26 -05:00
chrg6
3d25f00cd2 Estimate the time left from each step's recent pace, so Prepare the Shaders stops saying about 1 minute with 20 to go.
The launcher took the job's weighted fraction as its progress over time. Compile Changed Files carries over half of an
update's weight and can take seconds, so once the shader step began the job read as most of the way done, and the
estimate came out at a fifth of the time spent so far. The step running now is estimated from its progress over the
last minute (the shader step's translation and its slower build into the driver's cache each fill half of its bar),
and the steps still to come from the seconds per weight of the steps already done. On the shader build of a 42,142
shader update the estimate matches the time left.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:09:26 -05:00
chrg6
7f25329e72 Stop saying that shader preparation keeps play from ever stopping to compile.
The preparation translates the game's shaders in their default bind state and builds their stage libraries and
compute pipelines into the driver's own cache. Variants met in play with another bind state are still translated then,
pipelines are still linked in play, and the driver cache is kept per executable and is lost when the driver clears
it. The launcher's step text, the README, make_game.py and docs/launcher.md now say it makes such stops far rarer.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:09:26 -05:00
chrg6
fc747b0eba Check the length of LOCALAPPDATA in the setup before appending to it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:09:26 -05:00
chrg6
984a5f021a Check zbic's unpacked paths with is_relative_to, which a sibling folder cannot pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:09:26 -05:00
chrg6
41eacb97e8 Leave paths holding % out of the uninstall command line, which cmd.exe would expand.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:09:26 -05:00
chrg6
938676d57f Refuse plain http and manifests without a size and sha256 in the launcher, stop oversize downloads, and keep the token on its host.
Plain http goes only to this PC (the tests' servers), a redirect to http is refused, the Authorization header is
dropped when a redirect leaves its host, a download that runs past its size stops at once, and a manifest file entry
needs a plain file name, a size and a sha256.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:09:26 -05:00
epicmeme546
dd1192b655 Import a single save slot into its own slot folder and keep the rest of the save.
A slot folder holds only progress.sav and caption.sav, and Import Saves took those two files for a whole save: it replaced the save and left them at its top, where the game does not read them, so the game started a new one. A folder with progress.sav at its top now replaces that slot alone. A backup made by the import no longer brings its save-tx folder back with it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 06:10:58 -05:00
Claude
b1421faaf9 Show Prepare the Shaders moving in the launcher: the game prints its counts and the step sends them on.
The step sat at 0 % until it was done, an hour on some PCs, because nothing it ran reported progress to the launcher. nx2navi.exe --prepare-shaders now prints how many shaders it has translated and how many it has built into the driver's cache every 2 s. make_game.py reads them as they come and fills the bar, the translation the first half and the build the second, with the counts in the step's text. An event every 10 s keeps the text current while nothing is printed, and after 3 minutes without a count moving it says so, and that the step is still running.

The selftest draws the step as a tenth screen. Its made-up update was version 0.3.11, so from 0.4.0 on the update-ready screen showed Up to Date and was no longer drawn; it is now a minor version past the launcher running it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BSHQpLnScF9sNv4LNAaaS3
2026-11-09 08:32:13 +00:00
chrg6
d0e9ba6b30 Propose a game folder only on a fixed drive.
When the launcher's drive has less than 40 GB free, the proposed game folder goes to the drive with the most free
space, and a mapped network share or a USB drive was counted: the 26 GB RomFS image and the build would go there.
Only fixed drives are counted now, as the docs say.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:48 -05:00
chrg6
7b467f6686 Let the setup repair a launcher that updated itself and can no longer start.
The setup left the folder alone whenever app/current.txt named a newer version than its own, so after an update
"Run NX2navi-Setup.exe again to repair the installation" did nothing when python\ or that version's launcher was
gone (deleted, quarantined). A newer install is now kept only when its launcher and Python are there; otherwise the
setup unpacks its own release.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:48 -05:00