The two commits main gained since the last merge. docs/releases/v0.6.2.md stays removed; the two notes they added to
it are in docs/releases/v0.7.0.md. Checked on a dev build of the merged tree: the settings, self-test, graphics ABI,
input and kernel probes pass, and a scripted run with six DLSS mode changes presents no dark or black frame, makes the
area's textures in one frame at the load and ends without a fatal error.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The texture pool creates 16 entries a refresh and stops after 6 ms a frame, so that textures streaming in do not make
long frames. An area load leaves thousands of slots at once (4,936 loading the test save), and at that rate they came
in over the frames after the load screen: the scene's first frames showed a quarter of the picture as black stand-ins,
for 22 presented frames on a free machine and for about three seconds with the CPU busy.
While a refresh leaves pool_load_backlog slots or more (512; 0 never), the pool is loading: the count limit is off, a
frame's refreshes may take pool_load_ms (50), and frame_hold leaves out the presents of frames drawn meanwhile (up to
2 s), so the picture before the load stays until fewer than 64 slots are left. Measured with the flight recorder's
thumbnails of every present: the 4,847 textures are made in one frame of 345 ms, 30 frames before the scene fades in,
and the black share of the picture goes from the fade straight to its final value. The streaming limits are as before
below the backlog.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The overlay's rate, lows and graph were fed from the game's present calls. With the replay on the submitting thread, work held for an event is replayed with the next frame, so the calls come in uneven steps although each frame costs about the same: 36 and 9 ms apart in turn in a village, a sawtooth in the graph and a 1% low of 14 fps, while the pictures went out 19.7 ms apart on average and changed by 3.9 ms from one to the next. The present thread now reports each picture (perfmon_shown) and the overlay takes its intervals from that; the game's calls are used only where no present thread reports.
A picture that arrives early now waits until seven eighths of the recent interval have passed since the one before (vk_backend.c pace_smooth, NX2NAVI_PACE_SMOOTH, on by default; not with frame generation). In that village the change from one picture to the next went from 3.9 to 3.0 ms at 51 fps both ways, in a graveyard from 3.1 to 2.6 ms at 54.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Picking a mode in the settings menu changes the scene's size. The game makes its scene targets again at that size and
they start empty, and the first frames drawn into them are wrong: the first frame of the new size is lit without what
the frame before it left (a dark scene), and two frames later the scene can be black with the interface intact (seen
going to Ultra Performance and to DLAA). Captured over six scripted mode changes with every present saved: bad frames 3
and 5 presents after the change, the same with the lazy write-back on or off and with the frame hold off.
vk_dlaa.c notes a scene of another size within 60 presents of a settings change, and vk_backend.c frame_hold then
leaves out 6 presents from that frame on, once per change and beside the allowance for frames with skipped draws. This
hold also runs with DLSS Frame Generation on (the other one does not): a present left out is a longer gap between two
rendered frames to it, and a dark frame it is given comes out as several generated ones. frame_hold_ms = 0 turns both
off. Checked on a dev build with frame generation at 4x: the hold starts at the first frame of the new size at all six
changes and covers every bad frame of the capture, with no new Streamline error.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With NX2NAVI_REPLAY_ASYNC the uniform snapshot was taken when the replay thread started recording a submission, up to a frame after the game submitted it. The game rewrites that memory without waiting for the GPU: in a graveyard the settings block of the shadow pass held another block's values in the frame its per-frame allocator moved on to the next stretch of memory, about every 364 frames. The submitting thread now takes the copy before it queues the submission (vk_usnap_take), and the replay thread takes it over and leaves out what GPU writes in flight touch (vk_usnap_begin adopt). A frame dump of such a frame shows the block as the game submitted it.
That frame still comes out dark with the option on: vertex, storage and index memory reaches the VRAM mirrors when the replay uses it, as late as the uniform blocks did, and the snapshot covers uniform bindings only. With the option off, 3,000 presents in a row were free of dark and odd frames in that graveyard and in a village; with it on, one frame in about 364 was dark. It gave 65.6 against 56.1 and 64.1 against 54.3 frames per second in those two places. The option stays off by default, and its menu text, the example settings file and the release notes now say that it can show a dark or flickering frame.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A draw whose shader or pipeline is still building is left out of its frame, and the frame was shown without it: a black or unlit picture with the interface intact when it was a lighting pass, a light going out, or ground missing for a frame. In a player's session a full-screen draw was skipped after its 50 ms and the frame came out black as a boulder hit.
The frame's present is now left out when draws were skipped (vk_backend.c frame_hold, NX2NAVI_FRAME_HOLD_MS, 120 by default, 0 off). The game runs on, so nothing waits. The hold comes from an allowance that fills again at an eighth of the clock's rate, so a long build or a run of them shows its frames as before and does not freeze the picture; a full-screen draw that would be skipped with the allowance spent waits on instead, 500 ms at most. Not with DLSS Frame Generation.
On a first walk through a village with no pipeline recorded, 21 of the 23 frames with skipped draws were held back; in the Lost Woods, 7 of 8.
The performance overlay: the VRAM line is the card's dedicated memory in use, which counts every program on it: a player read 14.5 GB as the game's while the game held 7.3 GB. The line's third cell now gives what this process holds on the device-local heaps (the driver's budget figure), in place of the GPU clock, which stays where the driver gives no budget.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
NX2NAVI_ANISO was read once, when the first sampler was made (vk_texture.c sampler_features), and make_sampler raised the level of the surface textures' samplers as it created them. Samplers are looked up by the game's parameters and live until shutdown, so a new level could only reach them after a restart, and the setting had no row in the menu.
The decision which samplers get the level moves from make_sampler into aniso_raised, and sampler_for puts the raised level into the sampler key, as it does with the DLSS texture bias. vk_sampler_aniso_live reads the setting again after a settings change, at each present beside vk_dlaa_frame's bias; on a new level it clears the slots' samplers and bumps the sampler generation, as vk_sampler_dlss_bias does, so the slots and the descriptor caches take samplers of the new level from the next draw. The old level's samplers stay until shutdown like every sampler. The setting is marked live in cfg.c, and the Screen tab gets a Texture filtering row (Game, 2x, 4x, 8x, 16x) with the description the catalog already had.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The pre-snap of a submission took the pools the submission before it had synced. In Ocarina those are another submission's pools: the frame's first and fourth submissions use no pool and queried the pools of the ones before them, and the submissions after them then queried their own pools one at a time at first use. The pools are now remembered by the submission's place in its frame.
NX2NAVI_PRESNAP_PLACE=0 gives the old choice back and =ab switches it in the B blocks.
Co-Authored-By: Claude Fable 5.2 <[EMAIL]>
Every frame the render thread waited about 5 ms for the GPU after the frame's first submission, with the game
CPU-bound in every area. The wait is there so that the GPU has run that submission's passes before the game
rewrites what they read. But the submission also ends with the write-backs of what its shaders wrote, 60 MiB merged
into guest memory in 3 to 4 ms of GPU time, and the wait covered those too.
The write-backs now go into a part of their own. The part before them signals a second timeline, the executed
timeline, and the first-submission wait waits on that; the write-back part signals the timeline as before, so every
fence the game asks for still covers them, in the same queue order. wb_split = 0 keeps one part and the old wait.
Not measured in the game yet.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Performance: draws reuse the bindings that did not change and record only the dynamic states that differ from what
the command buffer holds; small uploads come from a staging arena; finished submissions are held briefly and handed to
the queue in batches; the recorder thread can keep a CPU core of its own; ASTC block-linear textures are deswizzled on
the GPU; dynamic resolution steps the upscaler mode to hold a frame-time target. Each has a setting in nx2navi.ini
(bind_reuse, dyn_delta, stg_arena, submit_batch, recorder_core, recorder_prio, astc_gpu_deswizzle, dyn_res) and the
staging cache now frees what it holds at shutdown.
Capture: NX2NAVI_DUMP=key saves the frame after each press of Insert, with mesh draws listed by task, mesh and fragment
shader, depth test and face culling, and mesh_prims.txt giving each mesh draw's primitive, clipping and fragment counts.
All of it is off unless NX2NAVI_DUMP is set.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The event order (vk_exec.c) holds a submission at a wait whose signal has not been replayed. In Kokiri Forest dialogue several presents a second came with the frame's whole submission held (4 held submissions, nothing drawn since the last present): the present showed the picture from before, a flash of the whole picture, and the frame was drawn afterwards in the present thread's empty submission, next to the following frame. With the event order off (NX2NAVI_EVENT_ORDER=0) the same spot had no such frame in 3600.
present_held (vk_backend.c, synchronous replay only): at a present with held work, what can go on runs first in a submission of its own; if work is still held, the present waits and goes out after the submission that replays the last of it, at the next present, or after 8 submissions. present_held = 0 (NX2NAVI_PRESENT_HELD=0) turns it off.
held_sync (vk_exec.c vk_exec_record): a submission without commands of its own that resumes held work now gets the VRAM mirror sync before and the write-back after, and a uniform copy, like any submission. Before, that work read mirrors that had missed the CPU's latest writes, and its GPU writes were dropped from the write-back list by the next submission's vk_mem_mirror_begin. held_sync = 0 (NX2NAVI_HELD_SYNC=0) turns it off.
Not yet measured in play.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The foliage's sun shadows took most of the GPU time: one mesh draw shaded about 1,000 million fragments in the far cascade. The far cascade now shades them at a 2x2 rate, and the two far cascades drop one side of the double-sided cards. At the forest entrance the frame rate went from 18 to about 43 fps on an RX 7900 XT.
FSR 3.1, its frame generation and the console mode now take effect without a restart. The full performance overlay lists the settings shown in the options menu.
NX2NAVI_GPU_PASSES times each pass and counts its fragments, and NX2NAVI_SET_AT changes settings at a given frame for test runs. Both are off by default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reflex's markers sat at the host present with frame numbers unlike the frame's tags, slReflexSleep was never called, and the low-latency mode was set before any swapchain existed, so it never applied. GfxBackend.frame_start, called from nvnWindowAcquireTexture, now sets the simulation and submit-start markers after Reflex's sleep (skipped once nothing was presented for 200 ms); submit end is set when the frame's submissions went out; the mode is set again after each swapchain (NX2NAVI_REFLEX: 1 on, 0 off, 2 boost); frames are numbered by the game's presents; and the fps counter counts what was shown. NX2SL_VERSION is 3, so nx2navi_dlssg.dll must be rebuilt. From a tester's fixes: 42-45 fps game, 84-90 on screen (was 24).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Comments say what the code does and why, docs/maxwell.md keeps the Maxwell facts, and fetch_refs.sh clones only the checkout the build reads. Code is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The texture pool descriptors are now a ring of sets, one per submission, brought up to date from a change log, and the first submission of each frame waits for its GPU work before the game goes on: the GPU ran late and part of a frame read data of the next one, and distant characters drew NaN that bloom spread over the frame. The window acquire also waits for the image's previous frame. Function locals start at zero unless DLAA is on, which removes the per-warp light tiles on the Great Fairy Fountain floor and Link's dark, speckled look. Texture slots follow only live entries of their own target, so the volumetric fog gets its 3D volume. The pool refresh walks only the slots that changed.
The translator implements PRMT (patch 0021), which it only logged before; the button prompts render again. HFMA2.RELU no longer depends on it, HMMA.F16 rounds once and HMMA.F32 is lowered, checked against GPU vectors with a new Maxwell warp emulator.
The frame dump gains a re-arming white-frame trigger, a trigger on a depth target's first pass, NaN pixels in magenta, image handles and view targets, and depth copies of sampled depth textures.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>