Commit Graph

19 Commits

Author SHA1 Message Date
chrg6
fa29f3fea5 Merge the second PR intake pass: anisotropic filtering in the Screen tab, the X3D die choice, the NVIDIA shader cache limit, the NGX core search and other fixes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 03:32:46 -05:00
Michael Schienbein
f19ed09f1c Find the player on game 1.1.1 so the world clock starts there.
The world clock (frame_step_world_us) starts at the first present that finds the player actor away from the origin,
and --seconds, --shot, NX2NAVI_SHOTS=w..., timed "@ms" script lines and recordings all run on it. player_pos read the
1.2.1 scene slot for every build that is not 1.1.0 or 1.4.3, so on 1.1.1 it never found a player: a --seconds run
never ended, no picture was taken and timed lines never fired.

On 1.1.1 player_pos now reads the Player actor from the slot [main+0x4e371d0] + 0x480, checks that its name pointer
(+0x20) reads "Player" and takes the position at +0x31c. The slot is empty on the title screen and holds the actor from
the first present after the save has loaded. The other builds keep their scene walk, whose name compare is shared.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-10 01:55:29 -05:00
chrg6
4cbdecb64b Round the physics solver's step count up above 60 fps and give Ocarina a steady step.
Above 60 fps players fell off moving platforms. The physics system takes its solver step count for a frame as
trunc(frames per update * 4 + 0.001): 4 at 60 fps and 8 at 30, the rates the game ships with, but 3 from 61 to 80
fps, 2 to 120, 1 to 240 (144 solver steps a second at 144 fps against 240 at 60), and 0 in a frame shorter than a
quarter of a 60 Hz frame. The solver skips its whole solve and sub-integration loop at 0, so such a frame resolves no
contact or friction and moves no rigid body. At a 240 fps limit, which "unlimited" paces at too, that was the frame
after every late one: the pacer keeps its phase, so the next display interval is shorter than the period.
The new patch set osolver rounds the count up, ceil(frames per update * 4 - 0.25): 4 and 8 as before, never fewer
steps a second than at 60 fps, at least 1. physics_steps = 0 gives the game's own count.

The step itself was the mean of the last five display intervals and changed with every frame: intervals of 5 and 30
ms in turn gave steps of 15 and 20 ms in turn, and one 60 ms frame at 200 fps took the step from 5 to 16 ms for five
frames. The game never saw a changing step on the console. The step is now the mean of the last 12 intervals without
the longest and the shortest, is the pacer's period when within 3% of it (at a 60 fps limit exactly one frame, every
frame), and repays the time the game was not given at up to a tenth of the step, so game time still follows the
clock. It is at least 1/480 s. step_steady = 0 gives the mean of five again. With trace = perf the fps lines show the
shortest and longest step and the time owed.

tests/frame_step_check.py drives frame_rate.c with made-up display times and the rest of the runtime stubbed.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 22:54:46 -05:00
chrg6
00f06e669e Fix nine runtime faults a tester's report named: a stack overrun on mesh draws, lost YMM halves on preemption, and seven more.
- The mesh stage's storage table starts 0x90 bytes before the end of the 2 KiB constant bank, and all sixteen slots
  were written: 0x6C bytes past a stack buffer on every mesh draw. It holds the nine slots that fit.
- The prebuilt runtime is compiled without AVX, so its preemption stub saved only XMM0-15 while the lifted code of
  an AVX2 processor keeps data in the upper YMM halves, which the stub's callees may clear. Both bodies are built
  now and the one for the processor is chosen at the start.
- After an FSR 3.1 frame generation error the window's swapchain was still AMD's object but went to the plain Vulkan
  calls. Swapchain calls follow whose swapchain it is, and a failure takes it down as a switch in the menu does.
- A movie is paced at its own 60 fps under a lower limit too: at 40 fps it ended 25 s behind its sound.
- A lost device left the wait for an upload spinning for good; it ends the run with the device's report.
- The compute pipeline key had four bytes of padding that were hashed and compared, so a prebuilt pipeline could be
  missed and built again.
- A thread's TLS pointer was published before the TLS was allocated, so the slot was always 0.
- A fatal exit puts RivaTuner Statistics Server's profile back, and an ini saved as UTF-16 is read.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 21:54:40 -05:00
chrg6
9bba578e58 Hold the game to 240 frames a second when the limit is unlimited or higher, which stops the quick menu's crash.
Ocarina steps its game by the clock, and the frame limiter let "unlimited" run free and took numbers up to 1000
(frame_rate.c LIMIT_FREE_MAX_HZ), on the belief that the game has no lower limit to its step. It has one: on the quick
menu, where a frame costs the GPU almost nothing, the game ran at 640 to 700 fps and after about two seconds read
address 0 in its own draw code (main+0x175b2a0), twice in a row with the same call stack, while 92 to 255 fps ran on.
The game now runs at most 240 frames a second, "unlimited", "display" and numbers included; with frame generation the
cap counts the game's own frames, so the generated ones still go above it on screen.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 13:15:37 -05:00
chrg6
cb234fade1 With frame generation and no frame limit chosen, limit to the display's refresh rate.
Since the pacer divides the limit by frame generation's factor, the default limit of 60 held the game to 30, 20 or 15 rendered frames a second at 2x, 3x or 4x on any monitor, 15 at DLSS 4x on a 165 Hz one. While AMD's or NVIDIA's frame generation swapchain is in use and neither fps_limit nor the older fps60 = 0 is set, the limit is now the monitor's rate, as with fps_limit = display: 4x on 165 Hz draws about 41 and shows 165. A limit the player set is kept, and the menu's Frame rate limit row shows the display choice while this applies.

The mouse camera divided its input by the limit's frame ratio, which counts generated frames, so frame generation turned it faster by its factor; it now uses the rate the game draws at (frame_step_game_hz).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 12:18:17 -05:00
chrg6
c745a9ef2f Offer DLSS multi frame generation at 2x, 3x and 4x.
framegen_multiplier (2, 3 or 4, live) sets how many frames the display gets per rendered frame while NVIDIA DLSS frame generation runs, and a DLSS multiplier row under Frame generation in the Screen tab sets it. nx2navi_dlssg.dll now passes that count to Streamline and reports the GPU's limit (numFramesToGenerateMax) through a new optional export, nx2sl_frames_max; with an older DLL the game keeps to 2x. A value above the limit is clamped to it with a log line, and the menu lists only what the GPU and driver allow, with a note saying why the rest are missing. The Frame generation row now says "in use: off" and why when DLSS frame generation was set but does not run.

The pacer divides the frame limit by the multiplier in effect, as it already halved it for FSR 3.1, so the display gets the limit and VSync at the display's rate drops no generated frames; RivaTuner Statistics Server stays out while DLSS frame generation runs, since it counts generated frames. With DLSS 2x a limit of 60 now shows 60 on screen instead of 120.

nx2navi_dlssg.dll has to be rebuilt (tools/build_dlssg.py) for 3x and 4x.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 12:18:17 -05:00
epicmeme546
754ded99e0 Raise the frame rate in Kokiri Forest and apply more settings during a run.
The foliage's sun shadows took most of the GPU time: one mesh draw shaded about 1,000 million fragments in the far cascade. The far cascade now shades them at a 2x2 rate, and the two far cascades drop one side of the double-sided cards. At the forest entrance the frame rate went from 18 to about 43 fps on an RX 7900 XT.

FSR 3.1, its frame generation and the console mode now take effect without a restart. The full performance overlay lists the settings shown in the options menu.

NX2NAVI_GPU_PASSES times each pass and counts its fragments, and NX2NAVI_SET_AT changes settings at a given frame for test runs. Both are off by default.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 02:40:51 -05:00
chrg6
95ab18fba2 Hold the game at 60 fps while a movie plays, so the intro's narration no longer doubles and the dream shows at high refresh rates.
The game's event script times the intro movie's narration and fades by counting updates as 60 Hz frames. At 144 fps everything ran 2.4 times early: each line started over the one before, and the closing fade hid the dream. frame_step_cap_ns caps the rate at the movie's 60 fps from the decoder's start to its end of stream (ov_movie_live); with fps_limit = unlimited the cap is the movie's rate. With RTSS limiting, the game's own limiter holds a new rate until RTSS has applied it. NX2NAVI_MOVIE_FPS sets the cap, 0 turns it off. From a tester's fixes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:48 -05:00
chrg6
68462a31a3 Pace "display" at 30 on a monitor below 30 Hz instead of at 60.
A measured rate under the lowest limit (a 24, 25 or 29.97 Hz TV) was taken for an unknown one and paced at 60: twice
the screen's rate, so half the frames were thrown away. Only an unknown rate (no window yet) is 60 now; a real one
below 30 Hz is held at 30.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:48 -05:00
chrg6
432cbdffe8 Hold the frame limit on screen while FSR 3.1 frame generation runs.
Frame generation presents a generated frame between each two of the game's, so a limit of 60 showed 120. While
generation is on (not paused for the menu or for want of depth and motion), the game is paced at half the limit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 04:10:34 -05:00
chrg6
9bb3c6c55a Hand the frame limit to RivaTuner Statistics Server where it runs, and take it back when RTSS does not hold to it.
Where RTSS is installed and running, the frame limit from the menu goes into RTSS's profile for the game's executable
through RTSS's hooks library, loaded at run time, and the game's own pacer stands aside while RTSS has hooked the game.
Menu changes apply live, unlimited clears the limit, and closing the game (or any exit path) puts back what the profile
held, or removes a profile the game created. Each change is read back from the saved profile: without administrator
rights RTSS's profile folder cannot be written, and the game then keeps its own limiter. While RTSS limits, RTSS's own
frame counter for the game is checked against the limit; well past it for three seconds, the game takes the limiting
back for the run. The log says which limiter is in use and why, and a note under the frame-rate row says when RTSS
limits, when its profile is read-only, and when it does not hold the game to the limit. rtss = 0 and frame generation
keep RTSS out.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 01:25:12 -05:00
chrg6
020fe0eeb8 Give Ocarina's own frames-per-update the display interval, so its menus and interface keep their speed above 60 fps.
The base-step write fixed gameplay, but the interface and the frame counter step by the time manager's nominal frame, which the framework update (main+0x6e6be0) sets every frame as 60 over a target refresh rate it keeps at 60 (main+0x3b4e300 writes frames per update, its inverse, seconds and the rate). The new patch set ostep (recomp/patches-v111.txt, on by default) makes that update read frames per update from patch page +256, which the runtime writes at each present as the 5-frame average of the display interval in 60 Hz frames. The game then makes the whole nominal frame itself and the base step stays 1.0. At 144 fps the Plus menu opened in 0.17 s against 0.35 s at 60; now in 0.25 s, within the screenshot capture's noise. Builds without the set keep writing the base step. NX2NAVI_SHOT_AFTER delays the first NX2NAVI_SHOT_EVERY shot.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 09:26:51 -05:00
chrg6
897ad1d0ea Step Ocarina's game by the display interval, not one 60 Hz frame per present, so it keeps its speed above 60 fps.
The time manager **[main+0x4c7e890] holds the frame's base step in 60 Hz frames (+0x1c0), from which each time category's {frames, 1/frames, seconds, 1/seconds} is made (main+0x2c84c). The game leaves it at 1.0 whatever the frame rate, so at 144 fps it ran 2.4 times too fast. Each present now writes the 5-frame average of the display interval there (1/1000 to 1/15 s); the game never writes it itself. Scripted input follows that game clock. NX2NAVI_OCARINA_STEP=0 leaves the step alone; NX2NAVI_TRACE=perf reports game seconds against wall seconds. NX2NAVI_VI_HZ and NX2NAVI_VI_VRR set the refresh rate and VRR support vi reports (60 and off as before), for diagnosis.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 09:26:51 -05:00
chrg6
99de7b943f Give each file of copied code one license line.
Each file that contains copied code names its copyright holder and license and points at THIRD_PARTY_NOTICES.md; zlib code keeps its full notice and the mark that it was altered. Comments and probe text only.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:40 -05:00
chrg6
1b39aabd37 Describe what the code does in comments and docs.
Comments say what the code does and why, docs/maxwell.md keeps the Maxwell facts, and fetch_refs.sh clones only the checkout the build reads. Code is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:40 -05:00
chrg6
4943b50ff2 Unlock the frame rate, shorten cold starts, and describe the Ocarina build in the docs.
Ocarina steps its game by the clock (the same frame-numbered walk covers half the distance at 120 fps), so in a build
without the fps60 and realtime patch sets the pacer holds frames to the frame limit alone: any rate from 30 to 1000,
the monitor's rate, or unlimited (164 fps average in Kokiri Forest). The menu always shows the row, with 165, 240 and
Unlimited added. NX2NAVI_PACE_HZ sets the pacer's rate for tests.

A compute pipeline is compiled outside the pipeline lock, and one compile serves the replay and the boot prebuild
alike; the prebuild uses half the CPUs. The guest waits at most NX2NAVI_PREWARM_WAIT_MS (3000) for the boot prewarm,
which then goes on in the background (a cold start waited 9.8 s). NX2NAVI_TEST_PAD_AT attaches the test gamepad late
and presses it, to test a controller switched on in play.

README, docs/architecture.md, docs/controls.md and AGENTS.md describe the Ocarina build.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
chrg6
9a5b1163f3 Make every settings menu row work for Ocarina and give the controls Ocarina's actions and keys.
The Screen tab hides Game resolution when the build has no output and scene patch sets, and the resolution code no
longer grows the memory pool for it. FSR sharpness now also runs when the game image is shrunk to the window, which is
always the case for Ocarina's 2560x1440 picture at 1920x1080, and the overlay drops NX2navi's fixed 3D scene size. A colour
profile set in nx2navi.ini now applies without the menu. The Game tab hides the frame limit in builds without frame-rate
patch sets and lists the game languages the RomFS ships, adding Polish and Brazilian Portuguese. 5.1 sound is reported to
the game's virtual output device. The remap page describes each button as Ocarina's controls screen does, gives each
D-pad direction its own description and drops NX2navi's shake row; the keyboard defaults follow Ocarina (Shift dashes on A,
Ctrl puts away on B, O and N for the ocarina and Navi, middle mouse resets the camera). docs/controls.md is updated.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
Valiantsin Dzerakh
0478c13e45 Import the base tree (MIT, see LICENSE) 2026-11-07 05:04:38 -05:00