The driver's sleep sits where the game's frame starts: at its first pad read or window image acquire after a present,
whichever comes first, before the input is sampled. The frame's number, the count of the game's presents, goes with
its work: the guest thread marks the simulation and the first submission, the replaying thread tags its queue
submissions and marks their end, and the present thread marks the host present, which carries the number too. The
window's swapchain is made with the latency mode while NVIDIA's path is on, and remade when the setting changes.
While the mode is in effect the pacer holds nothing, so a picture goes out as soon as it is drawn and the limit is
kept by the driver before the pad is read; RivaTuner Statistics Server is kept out as with frame generation. The pacer
takes the limit back while a movie plays, while no host present goes out, and for the rest of the run when the frames
show the driver does not hold it. With the mode off every hook returns at its first check.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The water renderer runs trunc(step) times the water's substeps of its ripple simulation a frame, which is none while the step is under one frame: the rings stood still above 60 fps. A new site of the set ostep hands the cut to frame_rate_water_host, which adds the step to a remainder kept for the water object and returns the whole steps in it. The waters have a table of 64 slots of their own, as fewer slots than surfaces would have them take each other's in turn.
frame_step_check.py calls the water and day hooks as their sites do. It also gets the three platform stubs it has lacked since the day clock's hook, without which it did not link.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game's movie player adds the time manager's step to an accumulator at each update and advances the movie by whole
pictures of it, at most the player's limit per update, which is one for the Triforce movie. While a movie plays the
game is held at 60 updates a second, but every late frame cost an update, the pacer started its slots again from the
late one, and the steady step's payback of the lost time came as steps over one frame, which the player cannot turn
into more than one picture. So each late frame put the picture further behind the sound, which plays by the clock, and
it never caught up.
While a movie plays the step is now exactly one movie frame, and the pacer keeps the movie's slots through a lateness
of up to a second, presenting the frames after a late one at once until the game is back on them. The updates then
average the movie's rate, and the picture, the event's update count and the game's clock all stay with the sound.
movie_clock = 0 gives the earlier behaviour. The movie log now measures the picture on screen against real time where
the game releases it (the game fetches pictures ahead into a list of its own) and reports it at the end of each movie.
test_hitch = <every>:<ms> makes a frame that much late every so many presents, for test runs.
Measured on the Triforce movie (event Dm_Kokiri_0095, 7,040 pictures, 117 s), one exe with movie_clock = 0 against 1,
and a 70 ms late frame every two seconds (test_hitch = 120:70), as a run with natural hitches had shown a drift of 40 ms
every ten seconds. Drift of the picture on screen behind real time, from the movie's first 10 s to its end:
fps_limit before (updates/s, drift at the end) after (updates/s, drift over the movie)
unlimited 58.86, 2,187 ms behind 60.22, flat at 53 to 55 ms
144 58.86, 2,196 ms behind 60.04, flat at -11 to -15 ms
120 58.98, 2,257 ms behind 60.20, flat at -1 to 0 ms
60 58.88, 2,220 ms behind 59.98, flat at -21 to -22 ms
Without the late frames both kept time (unlimited: before flat at 21 ms, after flat at -13 ms). The selftest,
--probe-cfg, --probe-kernel, --probe-movie and tests/frame_step_check.py pass; the check now plays a movie started at
240 fps with late and short frames and needs exactly one frame every update.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The frame step test gets a stub for the debug menu's game speed, which frame_rate.c now reads; the mouse camera test
one for the input script's perf segment mark. The shared save test defined mem_probing twice. The launcher's self-test
draws 16 screens now that both lines added one.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A second reading of the commits taken in from pull requests found these, each traced in the code:
- heap_lazy: the camera speed's search read the whole heap, which with the setting on committed every page and undid what it saves; a scan now steps over the pages the lazy heap never committed (mem_untouched_run). tests/frame_step_check.py and tests/save_share_check.py no longer linked (frame_rate.c and fs_host.c call the new memory functions; the second also missed mem_probing before); both pass again. The settings text says that with the setting on a PC out of commit ends the game in play, not at start, and the census comment is back over its own function.
- Pipeline libraries on AMD's older Windows driver: the condition is the driver for RDNA 2 and older (RX 400 to RX 6000), not RX 5000 and RX 6000 only, and the texts named a price the code does not have. With libraries off a new pipeline is built by a worker while its draw is left out, and the start waits for every recorded pipeline instead of 20 s at most. The texts say so, and that the finding is one player's on one card. The menu strings nothing shows are as they were.
- Page file hint: it comes only when Windows sizes every page file, and it names the initial size and the automatic management that must be unticked first.
- Frame generation note: it keeps "needs an RTX 40 or newer" for the players it is right for and points the others to the log; the bridge's line says it is Streamline's general support check.
- Comments and settings texts that still described the old behaviour: the process commit bound, the wait with shadow storage, the scratch's least size, the action prompt under auto.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 19f03aa01b26d6e17fb5fc70ad987aa8c68e8225)
The limit counted the frames on screen, so the game was paced at the limit over frame generation's multiplier: 60 at 4x drew 15 frames a second, and each step up of the multiplier took drawn frames away. Now a limit of 60 at 4x is 60 drawn and 240 shown. Only the display choice still counts the screen's frames, since a frame past the monitor's refresh is never seen, and with no limit set the default is 60 drawn rather than the monitor's rate.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Above 60 fps players fell off moving platforms. The physics system takes its solver step count for a frame as
trunc(frames per update * 4 + 0.001): 4 at 60 fps and 8 at 30, the rates the game ships with, but 3 from 61 to 80
fps, 2 to 120, 1 to 240 (144 solver steps a second at 144 fps against 240 at 60), and 0 in a frame shorter than a
quarter of a 60 Hz frame. The solver skips its whole solve and sub-integration loop at 0, so such a frame resolves no
contact or friction and moves no rigid body. At a 240 fps limit, which "unlimited" paces at too, that was the frame
after every late one: the pacer keeps its phase, so the next display interval is shorter than the period.
The new patch set osolver rounds the count up, ceil(frames per update * 4 - 0.25): 4 and 8 as before, never fewer
steps a second than at 60 fps, at least 1. physics_steps = 0 gives the game's own count.
The step itself was the mean of the last five display intervals and changed with every frame: intervals of 5 and 30
ms in turn gave steps of 15 and 20 ms in turn, and one 60 ms frame at 200 fps took the step from 5 to 16 ms for five
frames. The game never saw a changing step on the console. The step is now the mean of the last 12 intervals without
the longest and the shortest, is the pacer's period when within 3% of it (at a 60 fps limit exactly one frame, every
frame), and repays the time the game was not given at up to a tenth of the step, so game time still follows the
clock. It is at least 1/480 s. step_steady = 0 gives the mean of five again. With trace = perf the fps lines show the
shortest and longest step and the time owed.
tests/frame_step_check.py drives frame_rate.c with made-up display times and the rest of the runtime stubbed.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>