AMD's Windows driver gives the graphics family a single queue. vk_device.c then made no frame generation queues, and
vk_fg_create_swapchain returned without a log line: AMD FSR 3.1 frame generation set in the menu did nothing on an
RX 580. The present queue (which nothing else may submit to) and the image acquire queue now come from a family that
can present, compute families first, with their families passed to AMD's swapchain; the log names them, or says that
there are none, and the menu offers FSR 3.1 frame generation only where they exist.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The row showed AMD FSR 3.1 alone, and the frame generation of AMD's FSR SDK 2.4 could only be set in nx2navi.ini.
It is now listed after AMD FSR 3.1 as "AMD FSR 4 library" with the version the library runs on the card (3.1.6 on
an RX 7900 XT, the machine-learned 4.x on a Radeon RX 9000), where its libraries are there and FSR 4 runs. Choosing
it sets fsr4_fg and, since it generates only beside FSR 4 upscaling, FSR 4 as the upscaler; choosing AMD FSR 3.1
clears fsr4_fg. The performance overlay names the one whose swapchain is in place. In a test run the row went from
AMD FSR 3.1 to the new choice, back and to it again, and the swapchain followed each time.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
runtime/vk_fg4.cpp makes the frame generation swapchain and context with the libraries FSR 4 comes with
(amd_fidelityfx_loader_vk.dll and amd_fidelityfx_framegeneration_vk.dll beside the executable). vk_fg.cpp takes
that path only with fsr4_fg = 1 while FSR 4 is the upscaler; the default stays the FSR 3.1 library. The loader
picks the version for the card: the machine-learned FSR Frame Generation 4 on Radeon RX 9000 cards with Windows 11,
which is untested, and 3.1.6 elsewhere. On an RX 7900 XT (driver 26.10.1) it lists frame generation 3.1.6 and the
swapchains 4.0.0, which the driver brings and the loader chooses, and 3.1.7. The swapchain in place is wanted only
while its library is the one to use, so a change of the setting or of the upscaler, or a failure of this path,
takes it down as switching frame generation off does and the next present makes it with the other library.
The preparation gives this library the camera's position and axes, which FSR Frame Generation 4 requires, and a
scene scale of one metre a unit: with the 0.01 the FSR 3.1 path uses, version 3.1.6 drew grey translucent shapes
into the sky of its frames while the camera turned (160 captures of the screen during a camera sweep; clean with 1).
Both paths now generate a frame only when the picture without the HUD is there for it: generated from the
presented picture alone, the HUD would be warped with the scene behind it. In four configurations (21:9 with either
library, a 16:9 picture in a 21:9 window, a 1080 picture without HDR) every generated frame had it, and the log
counts the frames without. On screen, of the 6,404 pixels of the HUD's item button that stayed fixed through a
camera sweep with the FSR 3.1 library, 6,162 stayed fixed with this one.
Standing in Hyrule Field at 3440x1440 with FSR 4 Quality the game draws 43.0 frames a second with this path and
42.2 with the FSR 3.1 library, each shown twice over. One run changed the present mode, HDR, fullscreen, frame
generation, FSR 4, this setting and the upscaler in turn: 216 screenshots without a bad frame, and no failure.
The SDK's frame generation headers join runtime/third_party/ffx_sdk, unmodified. tools/make_kit.py and
tools/make_launcher.py take the third library from the --ffx4 folder when it is there, and tools/make_game.py
copies it beside the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
On Linux the Screen tab listed the five FSR 3.1 upscaling modes and AMD's frame generation, but only the
Windows build loads amd_fidelityfx_vk.dll: a player who picked a mode got the scene at the mode's share of
the picture with nothing to scale it back up. vk_ffx_available answers from the load's result once it ran,
and before that from the library file being there, so the menu can ask every frame. Where it says no,
the menu lists neither, a mode that is still set shows "in use: off", the scene keeps the game's own
share (vk_dlaa_fsr3), frame generation keeps the plain swapchain with one log line, and the texts name
what does run.
Pull request #371 by mooki000, taken as it is; two hunks merged by hand (vk_fg_wanted, which now also
stays off after a failure, and a README line that had gained Texture filtering). It touches vk_dlaa.c,
which another session is changing: vk_dlaa_fsr3 gains the availability test and one log text changes.
On Windows the menu changes only where the DLL is missing. The Windows files compile; nothing was run.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The foliage's sun shadows took most of the GPU time: one mesh draw shaded about 1,000 million fragments in the far cascade. The far cascade now shades them at a 2x2 rate, and the two far cascades drop one side of the double-sided cards. At the forest entrance the frame rate went from 18 to about 43 fps on an RX 7900 XT.
FSR 3.1, its frame generation and the console mode now take effect without a restart. The full performance overlay lists the settings shown in the options menu.
NX2NAVI_GPU_PASSES times each pass and counts its fragments, and NX2NAVI_SET_AT changes settings at a given frame for test runs. Both are off by default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Frame generation presents a generated frame between each two of the game's, so a limit of 60 showed 120. While
generation is on (not paused for the menu or for want of depth and motion), the game is paced at half the limit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Crashes: the render-target heap (HeapDef DynamicTextureAllocatorMem and its parent) grows with the widescreen
picture, so the pause menu no longer reads a null block at 5120x2160; texture uploads keep the game's memory mapped
while they copy it, so UnmapPhysicalMemory no longer pulls it away mid-copy; DLSS Frame Generation no longer crashes
in Streamline's set-up (physical devices and the window surface go through its proxies, its swapchain images are
counted first, resources are tagged per frame); a stale core-wait target is cleared before its thread is freed.
Freezes and races: a resize during a swapchain rebuild is kept, a failed frame generation swapchain is retried
instead of replaced by a plain one, three acquire timeouts in a row rebuild the swapchain, device waits take the
queue lock, a translator child that stops answering times out, an in-flight compute pipeline builds at normal
priority, a save Commit started before the window closes finishes and none starts after, a settings change just
before closing is saved, and a movie sample taken before a flush is dropped.
HDR: Enhanced HDR extends the game's own tonemap so highlights go above the picture's white (the hue slider,
which no longer applies, is gone from the menu); frame generation gets a HUD-less picture, the HDR flag and the HDR10
metadata under HDR too.
Memory: ASTC textures are encoded to BC3 unless the PC has 20 GiB of VRAM and 48 GiB of RAM, as Windows charges video
memory to the commit charge (a long session held 17 GiB of RGBA8 textures and 45.7 GiB of commit on a 32 GiB PC).
Shaders: the translator lowers spill-mode programs with more than eight uniform register groups in a wider spill
layout, and local loads and stores with a uniform-register address (36029 of the game's 36031 variants translate,
20 failed before).
The launcher release ships the shader tools and AMD's FidelityFX library (make_launcher.py --ffx); windres there gets
the toolchain on PATH.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Frame generation now gets the picture without the HUD each frame: the upscaler's output before the HUD is drawn over
it, encoded to sRGB as the game's last pass encodes its picture and put through the same colour, scaling and borders
as the presented frame, so it tells the HUD apart and leaves it unwarped in the generated frames
(NX2NAVI_FG_HUDLESS_SHOW=1 shows that picture, a test). The performance overlay gains an FG row and the fps line the
display's rate, generated frames included. The device enables VK_KHR_get_memory_requirements2 whenever AMD's frame
generation is on, which crashed at start with DLSS upscaling.
DLSS Frame Generation through NVIDIA Streamline (vk_dlssg.c, and nx2navi_dlssg.dll from runtime/dlssg, built with
MSVC by tools/build_dlssg.py against the SDK kept outside the repository) creates the instance and device through
Streamline's proxies and calls its swapchain hooks; Streamline still fails in its plugin start-up here, so the menu
lists it only while it is set.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With Frame generation set to AMD FSR 3.1 (after a restart), AMD's frame generation swapchain takes the place of the
present path's own: the device creates two more graphics queues for its presents and image acquires, the present
path acquires, gets images and presents through its replacement functions, and every frame configures generation
and records its preparation from the depth and camera motion vectors the DLSS or FSR 3.1 upscaling pass made (one of
them must be on). Generation pauses while the menu is open. On an RTX 5090 at a 60 fps game, about one frame was
generated for every frame drawn in play.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>