Each emulated mesh draw ended the pass, ran its stages between four barriers and began the pass again: a pass of 20
emulated draws became 20 passes, and on an RX 580 6 to 7 ms of a frame's 30 ms of GPU time went to the gaps between
passes (gpu_passes in Kokiri Forest: 8.7-10 ms per frame outside the game's passes and dispatches, 6.3-7.7 ms of it in
273-306 gaps with barriers only; 71 emulated draws a frame, 36 of them indirect). Now the first emulated draw of a pass
ends the part there (vk_exec_split_now), so the pass begins a new part, and the stages of every emulated draw of that
pass, the indirect ones' ring entries included, go into the part's pre-pass command buffer (vk_sync_pre), which the
queue runs after the mirror prologue and before the part; the pass is not split again. NX2NAVI_MESH_EMU_BATCH=0 (Lama
patches: Mesh emulation before the pass) brings the split back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Released textures kept, top texture levels left out, hot pools in system memory, the heap limit, the upload batch
limit, the kept ASTC buffer, mesh emulation and its arena and task records (greyed where the GPU has mesh shaders),
the overwritten-texture fix, the vector index fix, -O2 game code, pass times and the frame dump key. Each key gets a
row in the settings table; make_game.py reads guest_opt from nx2navi.ini when the environment does not set it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Choosing one of them while a temporal upscaler was set turned the upscaler off, and the picture fell back to bilinear scaling. vk_aa.c no longer keeps the game's SMAA while DLSS or FSR runs. The chosen pass replaces the game's composition as without them: in the native modes after the upscaler, and in the scaling modes before it. In the menu, a choice leaves the upscaler and frame generation alone, and the row notes that the upscaler's TAA runs too. Picking DLSS or FSR under Upscaling keeps the Anti-aliasing choice. The TAA entry, listed while no temporal mode is set, now sets FSR 4 Native AA where FSR 4 runs instead of forcing FSR 3.1. The overlay gets an Anti-aliasing line under Upscaling, for example "TAA + SMAA (Ultra)".
Checked on an RX 7900 XT in Hyrule Field with FSR 4.1 Native AA and Quality, and with FSR 3.1. The log has "the game's SMAA replaced by" smaa, off and fxaa while FSR 4.1.2 upscales, and the pictures are right.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ocarina anti-aliases every frame with its own SMAA in three compute passes after the bloom composite. The new aa
setting (nx2navi.ini aa, the Screen tab's Anti-aliasing row) keeps that by default. off, fxaa and smaa leave out the
game's edge and weight passes and replace its composition with a pass of our own that writes the same square-rooted
RGB9E5 words into the scene target: a plain copy, an edge smoothing written here, or the SMAA reference implementation
with its area and search textures (MIT). taa is DLSS or FSR 3.1 at the scene's size, which the row sets through the
upscaler; while either runs, the game's SMAA stays whatever aa says. The game's passes are known by a hash of their
guest code. The shader build now also rebuilds a header when a file its source includes changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The HDR row lists Off, RenoDX (the game's picture tone mapped to the display, the one fixed look) and Native (the game's own HDR, taken up at the next start), with the peak, game and HUD whites under either.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HDR on is the game's scene through the observer-response mapper, anchored to the game's own mid grey and tone slope, with half of the hue bend of the game's clamp: the defaults the menu had. The tone mapper choice, the mid grey, the tone slope and its match, the hue clip, exposure, highlights, shadows, contrast, saturation, highlight saturation, blowout, flare, hue, grade and gamma are gone from the menu, the settings table and the example ini; a file that still sets them works as before, the keys read by nothing and logging nothing. The menu's HDR row is Off and On, with the peak, game and HUD whites under it. The game's own HDR is still there for a file that sets hdr = native, and the row lists it only then. The luminance mapper and its grading code, which no setting reaches any more, are removed from the tonemap library, and the support buffer carries one vec4 for it.
The dark tones of a dark scene sat far above black: the present showed the game's sRGB-encoded picture as that encode decodes, linear near black, while the game is graded for a display of gamma about 2.2, and since the observer-response mapper became the default the 2.2 correction ran with the luminance mapper only. A scene value of 0.003 came out at 0.29 nits at a white of 350 nits, where a 2.2 display shows the game at 0.015. The present now always shows the picture as a 2.2 display would, and the tonemap aims its peak lower by that correction's inverse, so the brightest light still reaches the display's peak; the same value comes out at 0.017 nits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Resolution row lists each picture height as the size of the game's shape at it (21:9: 2560 x 1080, 3440 x 1440, 4300 x 1800, ...; the window's own shape where the picture follows the window) and sets both the picture's height and the window outside fullscreen, which follows at once within the monitor; the picture's height takes effect after a restart as before, and Native leaves the window as it is. A build without the widescreen patch sets, which draws the game's own size, keeps the Window size row.
The Upscaling rows and the overlay name FSR 4 by the major and minor version of the provider the driver lists (AMD FSR 4.1 for 4.1.2), and AMD FSR 4 until the library was asked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
mouse_mode = direct is the default, but on 1.1.1 it did nothing: only the 1.4.3 patch table had the sites, so the mouse always went through the stick emulation, which gives no turn at slow mouse speeds and tops out at about 107 degrees a second. The 1.1.1 table now has the set mouse_direct (on by default): at main+0x37c45c, where the camera's input update holds the processed stick in s1 and s0, a host call performs the displaced store and adds the raw mouse counts to both, so the mouse meets no dead zone and no curve; at main+0x37c4f0 a second call clears the idle bit for an update the mouse moved in. The counts are divided by the frames the game steps per update and by the stick camera speed, so the same hand movement turns the same angle at every frame rate. The Controls tab gets the mouse mode and mouse sensitivity rows, and mouse_mode = stick or NX2NAVI_MOUSE_DIRECT_PATCH=0 gives the old behaviour.
Checked here: the generator lifts the 1.1.1 game with the two sites (it compares each site's original word), the lifted game compiles and links with the runtime, and tests/mouse_direct_check.py passes its 1.1.1 harness (register contract, displaced store and load, equal turn at every frame rate and stick speed, the reset pause, capture and mode). Not checked here: the game was not run, so aiming with the mouse was not tried, and the differential tests against Unicorn were not run because no Python on this PC has Unicorn. The contributor measured 0.0800 degrees per count on both axes in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit bb8fecfbe43517006eafd7be9c22e8dbe9601de7)
Without the other players drawn in the world, which are unfinished. No relay address is built in, and with co-op off nothing opens a socket. Built on Windows and tested against a relay on this PC only; two games in one room and any real network have not been tried.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A second reading of the commits taken in from pull requests found these, each traced in the code:
- heap_lazy: the camera speed's search read the whole heap, which with the setting on committed every page and undid what it saves; a scan now steps over the pages the lazy heap never committed (mem_untouched_run). tests/frame_step_check.py and tests/save_share_check.py no longer linked (frame_rate.c and fs_host.c call the new memory functions; the second also missed mem_probing before); both pass again. The settings text says that with the setting on a PC out of commit ends the game in play, not at start, and the census comment is back over its own function.
- Pipeline libraries on AMD's older Windows driver: the condition is the driver for RDNA 2 and older (RX 400 to RX 6000), not RX 5000 and RX 6000 only, and the texts named a price the code does not have. With libraries off a new pipeline is built by a worker while its draw is left out, and the start waits for every recorded pipeline instead of 20 s at most. The texts say so, and that the finding is one player's on one card. The menu strings nothing shows are as they were.
- Page file hint: it comes only when Windows sizes every page file, and it names the initial size and the automatic management that must be unticked first.
- Frame generation note: it keeps "needs an RTX 40 or newer" for the players it is right for and points the others to the log; the bridge's line says it is Streamline's general support check.
- Comments and settings texts that still described the old behaviour: the process commit bound, the wait with shadow storage, the scratch's least size, the action prompt under auto.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 19f03aa01b26d6e17fb5fc70ad987aa8c68e8225)
Each player keeps their own game and save. One player makes a room, the others join it with its secret, and story flags and, by the room's rules, items, songs, quest items, small keys (a shared pool), rupees and ammunition reach every save. The layer is a host thread with one UDP socket to a relay the players run themselves (tools/coop_relay.py, Python's standard library only); the messages between the players are sealed with a key from the room's secret (XChaCha20-Poly1305, Monocypher 4.0.2 vendored with its licence and a row in THIRD_PARTY_NOTICES.md), every change is signed by the player who made it, a player accepts a room by its members' keys and the key of its rules, the save is copied to coop-backup before anything is applied, and values are set through the game's own routines between frames. The Co-op tab makes, joins, accepts, removes and leaves, and the menu takes typed text for the name, the relay and the secret. This is the contributor's pull request #518 on this line.
Nothing reaches the network while co-op is off: the socket is opened, and the relay's name looked up, only after co-op is on, a relay is set and a room is made or joined. There is no default relay.
Left out of the pull request: the other players drawn in the world (the "puppets") with the copied engine they need. They were unfinished, added two patch sites to the game's per-frame update that could not be put through the differential tests here, and their file helpers clashed with the ones this line already has. So no position is sent: the POS message's codec stays, nothing sends it.
Changed against the pull request:
- The menu's test hook drives the Co-op tab only when it comes from the environment. From nx2navi.ini it could turn co-op on, join a room and accept its offer.
- The log's label for a room is hashed from the secret instead of being its first three characters.
- A game that has not saved yet has no save to copy, and takes nothing from the room until it has saved once; that used to count as a copy made.
- A PING's token no longer carries the PC's uptime.
- On Windows the maker's key file and its folder get an access list with the player's account alone.
- The tests that link the platform layer get the socket library, and the save test a stand-in for the title screen's hook.
Checked on Windows, where the pull request had never been compiled: the runtime builds and links; --probe-coop passes (sockets on 127.0.0.1, the codec against its byte vectors, a fuzz of every parser, two sessions through a hostile mock relay, a relay restart, the sync engine); tests/coop_relay_test.py passes its 61 tests, with the probe through the real relay on 127.0.0.1 at 0 and 30 % loss; tests/coop_page_check.py passes and its deliberate fault fails 48 checks. Not checked: two games in one room (one game runs at a time here), any real network, the tab in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The two sides both made the wait after a frame's first submission cover the write-backs under shadow storage; the rule is kept in one place, vk_sync_wb_split.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The HDR tonemap gains a mapper built on a finite cone response in LMS: scene grey 0.18 lands where the game's curve puts it and rises through it with the slope of the game's curve, and the hue bend of the game's clamp is given back to bright colours. It takes the scene before the game's exposure gain and the gain itself, which the splice now finds in the game's shader. The luminance mapper stays selectable and the game's own curve stays the third choice. The mapper fits the Rec. 709 gamut here, as the game's scene target holds no negative component. New settings: the tone mapper's mid grey, tone slope match, tone slope and hue clip emulation. The gamma correction on the present applies with the luminance mapper only.
Not part of this: eye adaptation, the anti-aliasing and reconstruction shaders, bloom and local exposure sliders, the output colour space choice and a 16-bit float scene target. Checked by build and numerically against the source of the port; the picture on an HDR display has not been judged. THIRD_PARTY_NOTICES.md names the source.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
When Streamline loaded but DLSS Frame Generation was not available, the menu's row read "in use: off, needs an RTX 40 GPU or newer", also on an RTX 5080: the same check fails when the plugin did not load or a function it needs is missing. The row now points to the dlssg lines of the log, where the bridge says whether the plugin loaded and which of its functions it found, and then asks Streamline for its support result on the selected Vulkan device and logs it by name. The query is an optional export, so a bridge DLL of an earlier build keeps working.
The runtime and the bridge (tools/build_dlssg.py, MSVC, Streamline's headers) both build here. The failing case itself was not reproduced: on this RTX 5090 frame generation is available.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
That driver faults inside vkCreateGraphicsPipelines when it links the stage libraries of a burst of new pipelines. The game asks for one when an enemy dies and its effects are drawn for the first time, so the game ended with code 71 at every kill on an RX 6700 XT and an RX 5700 XT (issue #418), and the player who reported it found that gpl = 0 stops it. Unset, the setting is now off with that driver (vk_caps.amd_sc) and on everywhere else; gpl = 1 turns it on there, gpl = 0 off anywhere, and the caps line of the log says why it is off.
The price on those cards is that a new pipeline is built whole on the draw's path. Not run here: there is no AMD card. On an RTX 5090 the device probe reads "gpl yes" as before and "off by NX2NAVI_GPL=0" with the setting.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A player on an AMD card reported crashes in fights and that a line added to nx2navi.ini cured them. That line, async_compute = 1, is no setting of the game, and neither are two more in the same file; the one line of the file that changes how memory reaches the GPU is wb_lazy = 0. A second report, an RX 6600 on 0.7.1, lost its device 3.5 minutes into play with the lazy write-back on. Neither proves it the cause: the player changed several lines at once and sent no log, the RX 6600's last pass mark is inside a draw pass and not a fetch, cards with 8 GB lost their device the same way on NVIDIA before the lazy write-back existed, and reading the fault handler, the fetch, the arming and the buffers' lifetimes found no failure path. What depends on the driver and cannot be checked without the card: pages of guest memory are inaccessible while a host-pointer import of them is bound and written by the GPU, and Vulkan calls run inside the access-fault handler.
The default is now decided once the driver is known (wb_lazy_choice.h, vk_memory.c vk_mem_lazy_decide): on under Windows as before, except on AMD's driver branch for RDNA 1 and 2, which none of us has run it on; AMD's driver for RDNA 3 and newer keeps it on, since builds with that default were measured on an RX 7900 XT. What the player sets wins everywhere, and one line at start says the choice and its reason. On those cards open areas run at the 0.7.0 frame rate again (on an RTX 5090 that was 65 fps against 90 in Hyrule Field; not measured on AMD). tests/wb_lazy_check.c checks the choice by platform, driver and setting without a GPU.
For reports of this kind the log now holds what was missing. At start: every setting nx2navi.ini sets, and in one line the keys that are no settings of this version and do nothing; the settings menu shows those in its bottom row. At a fatal error or a crash: one line with the card, its driver, the memory mode, the lazy write-back with its reason, armed ranges, fetches so far and a fetch in progress, and the texture detail (dispatch.c rt_fatal_note_add, vk_device.c fatal_note), since a report is often the end of a log alone.
--probe-cfg loads the player's file: the three lines are named, and the menu's save keeps them and every other line it does not change byte for byte. Nothing here ran on an AMD card, and no fatal error was provoked to read the new line.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The limit counted the frames on screen, so the game was paced at the limit over frame generation's multiplier: 60 at 4x drew 15 frames a second, and each step up of the multiplier took drawn frames away. Now a limit of 60 at 4x is 60 drawn and 240 shown. Only the display choice still counts the screen's frames, since a frame past the monitor's refresh is never seen, and with no limit set the default is 60 drawn rather than the monitor's rate.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The user asked for this once the flicker fix was measured. The single-frame flicker that kept it off in 0.7.0 came from frames drawn before the game's signal that their data was written, which the previous commit fixes; the lazy write-back only made the frames come faster, so the signal fell into the replay more often. wb_lazy = 0 in nx2navi.ini still turns it off, and an ini that already holds the key keeps its value. Elsewhere than Windows the default stays 0, as its fetch inside the access-fault handler has never run there.
Measured on the build of the previous commit, 1,800 presented frames a run, standing in Hyrule Field by day with DLSS Performance, frame generation 4x and HDR. With the lazy write-back on and eight busy threads beside the game: 38 and 0 single-frame spikes with the fix switched off (408 and 44 frames whose signal came during the replay), 0 and 0 with it on (667 and 724 such frames). With it off and the same load: 0 spikes in four runs, two with the fix and two without, 86 to 140 such frames each. Without load, one run each: 88.5 frames a second with the fix against 93.3 without it with the lazy write-back on (GPU 7.2 against 6.8 ms a frame, 6.53 against 6.48 submissions a frame), 71.0 against 65.6 with it off, so the fix's cost is inside the run-to-run spread; every run ended cleanly without a fatal error. This build was started once with no setting anywhere: the lazy write-back was on, and the Screen tab shows no row for it.
Not measured: play by hand with the lazy write-back on and the fix (the user's sessions so far ran with it off), other areas than Hyrule Field, and more than one run for the frame rates.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
One conflict, in the build kit's notes, which keep both the shader cache item and the Texture detail text.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The row offers Automatic, Full, Reduced and Low, names the level Automatic picks on this card, and notes that a change takes effect after a restart.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A setting read at the start showed "after restart" under its value always. The values the game started with are now
kept (cfg.c start_values), a row shows the note only while its value differs from them, and the Restart button counts
the settings that wait, the upscaler, frame generation and HDR among them. A value the environment sets never waits.
--probe-cfg checks the count.
From pull request #377 by mooki000. Three conflicts in the menu resolved against the frame generation rows that came
in since: the upscaling row keeps its description by what can load, and the frame generation restart test knows both
ways NVIDIA's runs.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Eighteen commits, one per Linux pull request that was not in yet: the build fix for a source checkout, NVIDIA's shader
disk cache only with NVIDIA's driver, tools/run_game.py for a Linux game folder, a memory limit the low-memory handling
can read, the recording thread's core on Linux, shadow storage on Linux and Proton, the Steam Deck profile and prompts,
FSR 3.1 offered only where its library loads, DLSS frame generation through NGX on Linux, the AppImage with its window
and its workflow, and the processor level from /proc/cpuinfo. Two conflicts: the settings table keeps the area-load
settings under the new comment, and the example file keeps the lazy write-back as off by default and adds that it
stays off with shadow storage.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The two commits main gained since the last merge. docs/releases/v0.6.2.md stays removed; the two notes they added to
it are in docs/releases/v0.7.0.md. Checked on a dev build of the merged tree: the settings, self-test, graphics ABI,
input and kernel probes pass, and a scripted run with six DLSS mode changes presents no dark or black frame, makes the
area's textures in one frame at the load and ends without a fatal error.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With it on, single frames come out with the whole scene lit differently (brighter, shadows off). The flight recorder's
thumbnails of 1,800 presents standing in Hyrule Field show none with it off in every run, and with it on 43 to 181
while four other threads keep the CPU busy (10 to 97 in earlier runs, 0 on an idle machine); the cause is not found.
Two candidate fixes (arming only against a sync whose copies were handed over, and snapshots waiting for GPU writes in
flight) did not change the count, and fetching at every release made it far worse.
So wb_lazy is 0 unless set, on every platform (mem_init loses its special case), and the Screen tab has the row
Experimental FPS boost for it on Windows, with its text in the four menu languages; like every setting read at the
start it notes "after restart". The 0.7.0 notes describe it as experimental and off, say about 1.6 GiB for the video
memory a full shader cache no longer holds (2,484 to 846 MiB at the title screen in the measured run), and list the
two fixes before this one.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The Controls tab's Button prompts row and nx2navi.ini take steamdeck: the Deck's own labels in the game's
text, action prompt and ocarina notes, which are A B X Y where an Xbox pad has them, L1 R1 L2 R2 and L3 R3,
Menu and View. The style is drawn by tools/pad_prompts.py like the others, into romfs-patches-steamdeck
and romfs-patches-steamdeck-label, and every build with button art writes them.
Pull request #107 by loteran asked for PlayStation and Steam Deck prompts; it was closed, and the tree
took the PlayStation half in another form, drawn from button art instead of redrawn font glyphs. This is
the Steam Deck half in that form, written here: the art has no Deck style, so its entry in
tools/prompt_art.py names the Xbox pictures for the face buttons, Menu, View, the d-pad and the sticks
and the PlayStation pictures for the shoulders and stick clicks. It needs four pictures of the Xbox set
that no other style used (the white letters on a light button, for the ocarina's notes); a release made
with --prompt-art copies them with the rest.
The Windows files compile and tests/launcher_test.py passes, with the prompts step's test following the
number of folders (seven now); every picture the style names is in the art used for releases. The style
was not drawn here (that needs the game's font), and --probe-cfg, which has a new check, was not run.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
DLSS Frame Generation went through Streamline, which only the Windows build has, so framegen = dlss did
nothing on Linux. There it now calls NGX's frame generation feature directly (vk_dlaa.c vk_ngxfg_*), with
the depth, motion vectors, jitter, camera and HUD-less picture the Streamline path gets. With it on, each
frame is composed into an image of its own instead of a swapchain image, the generated frames are made at
the end of the frame's command buffer, and a presenter thread shows them and then the rendered frame, each
copied into a swapchain image it acquires itself, spaced over the time between rendered frames
(gfx_present.c ng_*). fg_mult is the multiplier: 2 to 6, or dynamic for only the frames the display's
refresh rate needs. NVIDIA's libnvidia-ngx-dlssg.so.<version> goes beside the game; it is not in the
repository or any kit.
Pull request #124 by spidercraft. Its base was the present path of 0.5, so it is ported by hand:
- taken as written: the NGX calls and the presenter (the block is lifted from the pull request's diff);
- wired again into present_image, create_swapchain, the output rate and the HUD-less picture as they
are now, with every new branch behind vk_ngxfg_wanted, which is 0 in the Windows build: the code is
compiled there and never reached;
- added: frame generation's feature and parameters are released before NGX shuts down, the presenter's
images, semaphores and command pool go when the device is released and are made again for a new one,
and a failed submit on this path settles its fence without an acquire semaphore;
- the menu: the Frame generation row follows the setting at once on Linux and says "after restart" only
when the game started without DLSS upscaling; the multiplier row lists what the GPU allows and Dynamic;
- the overlay row of the pull request it builds on (#123) is not part of this.
It touches vk_dlaa.c, which another session is changing: one field in N, the FG state after it, one FN
line, the instance extension query, the capability read in vk_dlaa_init, the release, and a block appended
at the end.
Known gap, as in the pull request: on this path fps_limit counts the frames the game draws. The Windows
files compile without new warnings; nothing was run, and the Linux path is not compiled here.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
On Linux the Screen tab listed the five FSR 3.1 upscaling modes and AMD's frame generation, but only the
Windows build loads amd_fidelityfx_vk.dll: a player who picked a mode got the scene at the mode's share of
the picture with nothing to scale it back up. vk_ffx_available answers from the load's result once it ran,
and before that from the library file being there, so the menu can ask every frame. Where it says no,
the menu lists neither, a mode that is still set shows "in use: off", the scene keeps the game's own
share (vk_dlaa_fsr3), frame generation keeps the plain swapchain with one log line, and the texts name
what does run.
Pull request #371 by mooki000, taken as it is; two hunks merged by hand (vk_fg_wanted, which now also
stays off after a failure, and a README line that had gained Texture filtering). It touches vk_dlaa.c,
which another session is changing: vk_dlaa_fsr3 gains the availability test and one log text changes.
On Windows the menu changes only where the DLL is missing. The Windows files compile; nothing was run.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With NX2NAVI_REPLAY_ASYNC the uniform snapshot was taken when the replay thread started recording a submission, up to a frame after the game submitted it. The game rewrites that memory without waiting for the GPU: in a graveyard the settings block of the shadow pass held another block's values in the frame its per-frame allocator moved on to the next stretch of memory, about every 364 frames. The submitting thread now takes the copy before it queues the submission (vk_usnap_take), and the replay thread takes it over and leaves out what GPU writes in flight touch (vk_usnap_begin adopt). A frame dump of such a frame shows the block as the game submitted it.
That frame still comes out dark with the option on: vertex, storage and index memory reaches the VRAM mirrors when the replay uses it, as late as the uniform blocks did, and the snapshot covers uniform bindings only. With the option off, 3,000 presents in a row were free of dark and odd frames in that graveyard and in a village; with it on, one frame in about 364 was dark. It gave 65.6 against 56.1 and 64.1 against 54.3 frames per second in those two places. The option stays off by default, and its menu text, the example settings file and the release notes now say that it can show a dark or flickering frame.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The launcher's home has a Saves screen: Export Save writes NX2navi-save-<date>_<time>.zip into Downloads (or a chosen folder) with a manifest, the save the game would load next and, for a bug report, the game's latest log and nx2navi.ini, never a key file; Import a Save checks a zip's manifest, game, paths and CRCs, backs the current save up into the saves folder and replaces it while the game is not running. The game's Game tab has the same exports and an import that waits in profile/save-import and becomes the save at the next start, since the running game would write its progress back over a save replaced under it.
The zip code (runtime/save_zip.c) and the import at start are checked without game files by tests/save_zip_check.py and tests/save_share_check.py; the launcher side by its test suite.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
framegen_multiplier (2, 3 or 4, live) sets how many frames the display gets per rendered frame while NVIDIA DLSS frame generation runs, and a DLSS multiplier row under Frame generation in the Screen tab sets it. nx2navi_dlssg.dll now passes that count to Streamline and reports the GPU's limit (numFramesToGenerateMax) through a new optional export, nx2sl_frames_max; with an older DLL the game keeps to 2x. A value above the limit is clamped to it with a log line, and the menu lists only what the GPU and driver allow, with a note saying why the rest are missing. The Frame generation row now says "in use: off" and why when DLSS frame generation was set but does not run.
The pacer divides the frame limit by the multiplier in effect, as it already halved it for FSR 3.1, so the display gets the limit and VSync at the display's rate drops no generated frames; RivaTuner Statistics Server stays out while DLSS frame generation runs, since it counts generated frames. With DLSS 2x a limit of 60 now shows 60 on screen instead of 120.
nx2navi_dlssg.dll has to be rebuilt (tools/build_dlssg.py) for 3x and 4x.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Button prompts row gains Keyboard and mouse (prompts = pc). tools/pad_prompts.py --style pc writes
romfs-patches-pc: every button glyph shows the first key its bindings give it (Ocarina's defaults, with the bind_
lines of the install's nx2navi.ini over them), the mouse buttons as a mouse, the d-pad and the left stick as their
keys laid out as on the keyboard (1 to 4, W A S D), and the camera as the mouse moving. The action prompt shows the
key's label, the ocarina's notes the light keys. A key the art has no picture of is written on a blank key. The pad
styles draw the same bytes as before.
The prompts description says so in each menu language, and the Chinese one no longer splits words across its lines.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game's ACES tonemap shader gets a GLSL function linked into its SPIR-V where it clamps each channel: the game's SDR result upgraded to the HDR range by luminance and mapped to the display with the RenoDRT curve, exposure, highlights, shadows, contrast, saturation, highlight saturation, blowout, flare and hue correction. The settings reach it as four vec4 the support buffer gains at 1440. The present encode is a port of the swap chain pass: gamma correction, gamut compression, the peak clamp and PQ. Without an HDR10 swapchain the shader gives the game's own SDR picture; native HDR is unchanged.
The menu offers Off, RenoDX and Native, with gamma correction, the tone mapper and its grading rows. The shader build compiles sources marked "keep functions" without optimisation so their functions survive for the splice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Upscaling row no longer carries "DLSS on or off: after restart". It shows "after restart" only while the upscaler picked cannot start in this run. Frame generation says so only for a change to or from NVIDIA's, since AMD's applies at once, and the HDR row no longer says it twice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
pad_layout = playstation plays a pad by label as xbox does, named for a PlayStation pad: cross A, circle B, square X,
triangle Y. The prompts follow it like the Xbox layout, by label. Under Automatic the note says PlayStation for a pad
whose bottom button is labelled cross. The layout description in each menu language now says what every choice does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Controls tab has a Button prompts row again, with Nintendo, Xbox and PlayStation. prompts = playstation is a new
value next to xbox; nintendo, xbox and pc read as before, and pc stays out of the row as nothing makes its files for
this game. The game reads its prompts at start, so the row says when a restart would change them.
tools/pad_prompts.py writes the overlay folders romfs-patches-xbox, -xbox-label, -playstation and -playstation-label
from the player's RomFS and a folder of button art that stays outside the repository. The button font's glyphs become
outlines traced from the art, the action prompt's letters and the ocarina's note buttons are painted again in their
own BC4 and ASTC formats, and the font's entry in the resource size table grows with it. The by-position folders show
Switch A as B or circle, the by-label ones as A or cross, following the pad layout. The settings probe checks the new
value and folder names.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The foliage's sun shadows took most of the GPU time: one mesh draw shaded about 1,000 million fragments in the far cascade. The far cascade now shades them at a 2x2 rate, and the two far cascades drop one side of the double-sided cards. At the forest entrance the frame rate went from 18 to about 43 fps on an RX 7900 XT.
FSR 3.1, its frame generation and the console mode now take effect without a restart. The full performance overlay lists the settings shown in the options menu.
NX2NAVI_GPU_PASSES times each pass and counts its fragments, and NX2NAVI_SET_AT changes settings at a given frame for test runs. Both are off by default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Import Saves: the saves folder picked in the dialog imports what waits in it (it had made the folder's README the
save); the save backed up is the one the game would load, in runtime/fs_host.c save_recover's order, so an interrupted
commit's only copy is kept, and the rest of the commit journal moves into the backup instead of being deleted; the
imported save goes into place before the old one is deleted, which comes back if that fails; another NX2navi install's
finished commit counts as its save. Tests cover each.
Quit waits while the game writes a save, as Restart does: the game runs on under the menu, and closing the window
finishes only a commit that has begun. The VSync row says "in use: Immediate" when VSync On falls back to tearing, and
its default follows the device profile (cfg_default). Without the game's textures the menu's divider is a plain line
and diamond of its own, not a tracing of the game's ornament.
make_game.py: the compile key holds the processor's features (cpu_tag), so a game folder moved to a PC without AVX2
compiles again instead of crashing; the main thread gets 16 MiB of stack with GNU ld too; any error waits for the
RomFS image, so its .part file is not cut short. The launcher tests use a neutral title id; tools/menu_preview.cpp
has cfg_default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In-game menu: the settings window, its tabs, rows, buttons and cursor, the performance overlay and the Preparing
shaders box are drawn with the game's interface textures where the RomFS holds them (runtime/ui/menu_skin.cpp,
perf_panel.cpp; plain shapes until they are decoded). Restart joins Continue and Quit, each behind a confirmation;
VSync is an on/off switch; DLSS is listed only on NVIDIA GPUs; the menu sounds are quieter; Picture shape is gone and
the setting descriptions are shorter; edge cases of input, layout and fonts are fixed. tools/menu_preview.py draws the
menu without the game.
Launcher: Import Saves takes a save from the game folder's saves/ folder or one the player picks; downloads fall back
to Windows' own certificate check when Python's refuses a server; updates are faster; the title bar is drawn in the
window and Navi is every icon. tools/make_game.py builds with CLANG64's clang where the launcher installed it, packs
the RomFS beside the lift and the compile, takes a prebuilt runtime, and compiles the game's resources without cmd.exe,
so a user folder with a space in its name builds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Where RTSS is installed and running, the frame limit from the menu goes into RTSS's profile for the game's executable
through RTSS's hooks library, loaded at run time, and the game's own pacer stands aside while RTSS has hooked the game.
Menu changes apply live, unlimited clears the limit, and closing the game (or any exit path) puts back what the profile
held, or removes a profile the game created. Each change is read back from the saved profile: without administrator
rights RTSS's profile folder cannot be written, and the game then keeps its own limiter. While RTSS limits, RTSS's own
frame counter for the game is checked against the limit; well past it for three seconds, the game takes the limiting
back for the run. The log says which limiter is in use and why, and a note under the frame-rate row says when RTSS
limits, when its profile is read-only, and when it does not hold the game to the limit. rtss = 0 and frame generation
keep RTSS out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Shaders: a switch whose index is clamped against a register that a MOV of an immediate set before it now finds its
jump table (AmpereLowering.cs BrxTargets), so all 36,031 of the game's shader variants translate and no draw is skipped
for a failed one. The compare-and-swap loop behind storage-buffer atomics (patch 0033) takes the value a failed swap
returns as its next expected value instead of loading the word again, which on some drivers kept returning a stale
copy.
Memory: an unused physical pool outlives the submission being recorded, as virtual pages may still reach it through
device addresses; an image whose creation failed is not tried again for 2 s.
The installer and Linux texts name this game.
The README has the project icon, the current status, features, requirements and known issues.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Crashes: the render-target heap (HeapDef DynamicTextureAllocatorMem and its parent) grows with the widescreen
picture, so the pause menu no longer reads a null block at 5120x2160; texture uploads keep the game's memory mapped
while they copy it, so UnmapPhysicalMemory no longer pulls it away mid-copy; DLSS Frame Generation no longer crashes
in Streamline's set-up (physical devices and the window surface go through its proxies, its swapchain images are
counted first, resources are tagged per frame); a stale core-wait target is cleared before its thread is freed.
Freezes and races: a resize during a swapchain rebuild is kept, a failed frame generation swapchain is retried
instead of replaced by a plain one, three acquire timeouts in a row rebuild the swapchain, device waits take the
queue lock, a translator child that stops answering times out, an in-flight compute pipeline builds at normal
priority, a save Commit started before the window closes finishes and none starts after, a settings change just
before closing is saved, and a movie sample taken before a flush is dropped.
HDR: Enhanced HDR extends the game's own tonemap so highlights go above the picture's white (the hue slider,
which no longer applies, is gone from the menu); frame generation gets a HUD-less picture, the HDR flag and the HDR10
metadata under HDR too.
Memory: ASTC textures are encoded to BC3 unless the PC has 20 GiB of VRAM and 48 GiB of RAM, as Windows charges video
memory to the commit charge (a long session held 17 GiB of RGBA8 textures and 45.7 GiB of commit on a 32 GiB PC).
Shaders: the translator lowers spill-mode programs with more than eight uniform register groups in a wider spill
layout, and local loads and stores with a uniform-register address (36029 of the game's 36031 variants translate,
20 failed before).
The launcher release ships the shader tools and AMD's FidelityFX library (make_launcher.py --ffx); windres there gets
the toolchain on PATH.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HDR is now a menu row: Off, Enhanced (the runtime's own HDR tonemap) or Native. Native reports an HDR10 display to
the game with the settings' peak and paper white; the game then renders its own HDR picture and presents it as PQ in
A2B10G10R10, which goes to the HDR10 swapchain as it is. The peak, game, HUD and (for Enhanced) hue rows follow it.
The build kit's link left out runtime/nx2navi.rc, so the game had no manifest and no icon: without per-monitor DPI
awareness, a 5120x2160 monitor at 150 % gave a 3413x1440 window that Windows stretched. It is compiled with windres
and linked again.
The movie decoder's frames are copied into the game's buffer by the host; the back end is now told of that write, so
the GPU's copy of the buffer does not keep older or empty bytes (green stripes in NV12).
A longjmp out of the game's JPEG decoder now logs the guest functions that called it, to trace a later crash.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Frame generation now gets the picture without the HUD each frame: the upscaler's output before the HUD is drawn over
it, encoded to sRGB as the game's last pass encodes its picture and put through the same colour, scaling and borders
as the presented frame, so it tells the HUD apart and leaves it unwarped in the generated frames
(NX2NAVI_FG_HUDLESS_SHOW=1 shows that picture, a test). The performance overlay gains an FG row and the fps line the
display's rate, generated frames included. The device enables VK_KHR_get_memory_requirements2 whenever AMD's frame
generation is on, which crashed at start with DLSS upscaling.
DLSS Frame Generation through NVIDIA Streamline (vk_dlssg.c, and nx2navi_dlssg.dll from runtime/dlssg, built with
MSVC by tools/build_dlssg.py against the SDK kept outside the repository) creates the instance and device through
Streamline's proxies and calls its swapchain hooks; Streamline still fails in its plugin start-up here, so the menu
lists it only while it is set.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With Frame generation set to AMD FSR 3.1 (after a restart), AMD's frame generation swapchain takes the place of the
present path's own: the device creates two more graphics queues for its presents and image acquires, the present
path acquires, gets images and presents through its replacement functions, and every frame configures generation
and records its preparation from the depth and camera motion vectors the DLSS or FSR 3.1 upscaling pass made (one of
them must be on). Generation pauses while the menu is open. On an RTX 5090 at a 60 fps game, about one frame was
generated for every frame drawn in play.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Upscaling choice gains FSR 3.1 Native AA, Quality, Balanced, Performance and Ultra Performance. FSR 3.1 runs
through AMD's signed amd_fidelityfx_vk.dll (loaded at run time; the build kit ships it) in DLSS's place, on the same
scene light, depth and camera motion vectors and at the same render scales. Its Vulkan back end needs
VK_KHR_get_memory_requirements2, which the device now enables when FSR 3.1 is chosen.
A half-size effect pass with three targets and a half-size depth was taken for a G-buffer, which switched every later
frame to the deferred frame shape: there the output pass of a smaller scene was never found, so DLSS Quality,
Balanced, Performance and Ultra Performance did nothing on a 16:9 picture. Such a pass smaller than the scene is now
left alone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game sizes its scene each frame from a GPU-time controller. The new patch set res_fixed takes the controller's
fixed path and reads the scale from the patch page, so DLSS Quality, Balanced, Performance and Ultra Performance
render at 67, 58, 50 and 33 percent of the picture and DLAA at all of it. The set goes on once the controller has run
for a few frames, and the menu's Upscaling choice lists the modes and switches them live.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NX2NAVI_GAME_RES (1440, 1800, 2160, 2880 or window, read at start) sets the picture's height; the widescreen patch
sets now also run at 16:9 when the height is not the game's, with the width following the shape and the scene 3/4 of
both as the game draws it. Measured at 2160p with 21:9: a 5120x2160 picture and a 3840x1620 scene at 60 fps.
The Screen tab's Scaling-to-the-window row and the DLSS rows become one Upscaling row (Bilinear, AMD FSR 1, NVIDIA
DLSS) over NX2NAVI_UPSCALER and NX2NAVI_DLAA (option_rows: opt_choice_index and opt_apply for a row over several
settings), with the FSR strength greyed out unless FSR is chosen and a Resolution row beside the widescreen one. DLSS
always uses NVIDIA's model for its scale (no model row). There are no DLSS quality modes: the game sizes its scene
from the picture by its own 3/4 share, and writing a smaller scene into wide_scene's constant left the light target
as it was, so every mode would render the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>