Ocarina anti-aliases every frame with its own SMAA in three compute passes after the bloom composite. The new aa
setting (nx2navi.ini aa, the Screen tab's Anti-aliasing row) keeps that by default. off, fxaa and smaa leave out the
game's edge and weight passes and replace its composition with a pass of our own that writes the same square-rooted
RGB9E5 words into the scene target: a plain copy, an edge smoothing written here, or the SMAA reference implementation
with its area and search textures (MIT). taa is DLSS or FSR 3.1 at the scene's size, which the row sets through the
upscaler; while either runs, the game's SMAA stays whatever aa says. The game's passes are known by a hash of their
guest code. The shader build now also rebuilds a header when a file its source includes changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Jitter was off on Ocarina because with it the ground and characters went white within seconds. The cause: the game draws its depth pre-pass into the scene depth, copies it into a second image of the same size, and shades the same geometry into the light target against the copy with the depth test EQUAL. Only the draws into the first image took the jitter, so the shading draws compared unjittered depth with jittered depth, EQUAL failed on nearly every pixel, and the light target kept its clear colour. Frame dumps with and without jitter show the shading passes darkening the light target from a mean of 133 to 13 without it and leaving it at 112 with it.
On Ocarina's frame every draw that projects through the camera (it binds the scene context at c3) into a D32F depth of the scene's size now takes the jitter, and full-screen passes drawn with a scene depth attached do not: the bloom composite DLSS reads would otherwise move the picture by the jitter a second time. The viewport is recorded again whenever a draw's jitter differs from the last one recorded. Jitter is on for Ocarina by default (dlaa_jitter = 0 still turns it off), and the DLAA log line counts jittered frames and draws.
Checked in Hyrule Field with the camera turning: the picture's brightness matches the run without jitter (mean 33 to 63 against 35 to 60; 144 to 188 before the fix), and in 20 motion-vector checks the warp error is lowest with the jitter applied as DLSS is told it (0.032 to 0.077), against 0.076 to 0.141 with its sign flipped and 0.059 to 0.106 left out, still cameras included: the scene moves by the jitter of that frame, in render pixels.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The author of pull request #353 closed it on 2026-11-11 with the words that they give no permission to use its code. Its port (3134f524) goes: the mark of a pipeline that declares the table (VkPipeInfo.gpa, vk_pipeline.c pipe_add) and of the part that draws with it (vk_mem_gpa_use in vk_exec_draw.c bind_resources and mo_emit), the sync of the table's pools in every such part's prologue (vk_mem_gpa_sync), the submission with a callback in the replay's place as it stood (vk_sync_probe_submit), and --probe-vkmem's read through the table with its shader (test_gpa_read, runtime/shaders/gpa_read.spvasm).
In its place, after pull request #551, which was written without that code: a shadow pool goes into the table and onto a list of the table's shadows (vk_memory.c shadow_table_add); the record of a binding of the table notes the guest submission (vk_exec_draw.c ssbo_info, vk_mem_shadow_table_read); and vk_mem_shadow_sync brings the CPU's writes into every shadow on the list once for that guest submission, before the part is submitted. Once is enough, because the copy-ins read the guest submission's write-watch snapshots, which a second sync would find unchanged. Measured by #551's author on Linux (RTX 4090, Kokiri Forest): 113 and 76 frames over 25 ms in 75 s against 217 and 429 with the port, 43 against 41 fps, the picture complete in both.
What this line had built on the port stays, on the new sync: the test that passes over a pool with nothing written (shadow_pool_clean), the upload of the same pages into a table pool's VRAM mirror, the write-back of stores through the table (NX2NAVI_SHADOW_TABLE_STORES, table_wb_cb, now asked once per guest submission that binds the table) and the counts of NX2NAVI_SHADOW_CHECK. The probes that record their own commands (the lost-device probe, --probe-vkmem's table parts) call vk_sync_submit_own, written anew. vk_mem_shadow_storage stays: one line that returns the mode. Finalized pools in the table were already kept for vk_mem_shutdown here.
--probe-vkmem has a check of its own for the sync (test_table_sync): the shadow of a pool that is never bound keeps its old word through a CPU write and a guest submission that does not bind the table, and holds the new one after a guest submission that does. It passes with NX2NAVI_SHADOW=1 on Windows (RTX 5090), as do the store check with NX2NAVI_SHADOW_TABLE_STORES=1 and the probe without shadow storage; --probe-devlost ends as before. Not run: the game, with or without shadow storage, and anything on Linux.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Two descriptors can name one CPU-written storage: one whose content the cache takes from the CPU, and a second with a texture flag for which it does not. The second has no upload of its own and its slot shows the first one's image while that entry is live. Once the first is released, a lookup of the second's slot makes it an entry of its own, start_at destroys the released first one, and the new image starts cleared and is never uploaded; the slot shows it from then on, also after the first descriptor is registered again. The same happens when both are released and the texture pool refresh looks the second's slot up before the next texture arrives in that memory.
With tex_split_fill = 1 (the default) start_at gives such an entry the storage's bytes: by a copy from the released CPU-written entry it is about to destroy when that image is current and alias_compatible allows, else by an upload from the storage. The image then follows the storage as a CPU-written texture's does until the GPU or WriteTexels writes it; 2 fills it once, 0 is the behaviour before. Depth, stencil and multisample images, pools without CPU access and storage over 32 MiB are left out, and an entry that is to be filled gets a new image instead of a released entry's, since a reused image goes through its first transition after the upload batch. The perf trace counts the copies, the fills with their bytes and time, the fills made again after a write and the entries left empty.
--probe-vkmem makes both sequences with the three values and reads the second descriptor's image back: zeros with 0, the storage's bytes with 1, and with 2 the bytes of the texture that was in the memory before when both descriptors were let go of. One case makes the entry inside a recorded submission, through a hook that lets the probe stand in for a replay, and there the content comes by the copy.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
An indirect mesh draw reads its workgroup count through a ring entry that a buffer copy fills, and a copy cannot be
recorded inside a pass: every such draw ended its pass, 45 times a frame in a village. The first draw of a run now
fills the entries of the mesh draws that follow it with only state, draws, counter reports and render conditions
between them, and those draws stay in the pass (mesh_ahead, default 1; 0 is the old way, ab switches in A/B blocks).
An entry is taken only by the draw it was filled for, at the same record address, while no other op was replayed
since. Counter reports count as staying in the pass because the replay closes their query inside it and writes the
value from the completion thread; the game reports one after most of these draws, and without that only 38% of the
draws were served.
Measured in the village: 42 of the 45 draws a frame are served by an entry filled ahead; gaps with these copies
41 to 3 a frame (0.22 to 0.04 ms of GPU time); passes and dispatches 248 to 208 a frame (302 to 254 in Hyrule
Field). With the piece release of the commit before, one run each: village 142.6 fps and GPU busy 3.87 ms (138.0
and 135.4 fps, 4.15 ms without this change), Hyrule Field 136.8 fps and 4.34 ms (131.5 and 131.3, 4.70 ms). In A/B
blocks of one run with the narrower rule (counter reports still ending a run) the GPU's busy time went from 4.81 to
4.64 ms.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Every pass begin and every compute dispatch recorded a full barrier, which makes the GPU finish everything before each of them. With barrier_game = 1 (NX2NAVI_BARRIER_GAME) a pass after an earlier pass gets a barrier for its attachments only and a dispatch after other dispatches gets none; a change between drawing and compute keeps the full barrier, and so do the game's own barriers and the replay's copies, clears, fills and uniform updates. On an RTX 5090 at 2560x1440 the GPU's time for a frame fell from 5.4 to 4.9 ms standing in Kokiri Forest (two in-run A/B runs, the control's blocks differ by 0.7 %) and from 5.1 to 4.4 ms on a walk through it. The frame rate did not change there, because the replay thread is the limit on that machine; it should rise where the GPU is.
The default is 1 on NVIDIA graphics cards only, and 0 on every other vendor's: the game placed its barriers for an NVIDIA GPU, Vulkan asks for more of them than the game recorded, and no AMD or Intel driver has run this. 34 screenshots across the A and B blocks of one run show the same picture on NVIDIA. NX2NAVI_TRACE=perf logs the barriers a frame by kind.
From pull request #389, which had it on for every vendor; the default by vendor and the settings text are added here. The validation layer's synchronization check could not be run on this machine.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Both are about the time between two frames. Ocarina waits for the previous frame's fence before it lets the next frame's GPU work start: its main thread signals an event from the CPU, and the main queue's commands begin with a wait for it.
The completion thread ran a submission's callbacks before it let the submission's waiters go, and the occlusion counts were among them: one vkGetQueryPoolResults and one vkResetQueryPool per reported query, about a hundred queries a frame in Hyrule Field. On an RX 7900 XT (26.10.1) each call goes into the kernel, 3.9 ms of every frame, so the fence was reached 4 to 6 ms after the GPU had finished with every game thread waiting. Slots come from the ring in order, so one call now reads up to 256 slots from the one asked for, the available results are kept for the segments that follow, and the slots taken are reset in runs (vk_exec_xfer.c oq_take, NX2NAVI_OQ_BATCH). Standing in Hyrule Field at 3440x1440 with FSR: 52.7 fps against 44.6, the longest frame of the measured minute 46 ms against 55; the completion thread spends 0.3 ms a frame in the callback.
When the CPU's signal came a millisecond or two after the main queue's submit call, the submission took its copies, stopped at the wait and was held; the render thread polled the event, presented, and the present replayed the frame under a value the game's fence does not stand for. The next frame then skipped its wait for the GPU and was replayed inside its submit call, and frames of 23 and 15 ms took turns. A submission that begins with a wait for an event the CPU has signalled before now waits for the signal in the submit call, before its copies are taken, 10 ms at most (vk_exec.c vk_exec_gate_wait, NX2NAVI_GATE_WAIT_MS): 54.5 fps and a longest frame of 33 ms in the same place, 58.6 fps with the recorder thread on. With a camera sweep the pictures went out 21.0 ms apart on average with a 99th percentile of 55 ms, against 25.4 and 64. A village went from 48.6 to 53.7 fps and a graveyard from 56.5 to 64.2. 900 consecutive frames of a still scene show no dark or changed frame, with the recorder thread and without.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A draw whose pipeline is still building is skipped when its pass is rendered every frame and waits otherwise, so that a lookup table or a volume generated once is not left empty. "Every frame" meant "in the last four frames", so after a loading screen or a full-screen menu every pass of the first frame read as new: each draw with a new pipeline waited on the replay thread, up to 30 s each, and a mesh draw, whose pipeline has no fast link, for its whole compile. A player's 0.7.1 log shows it at three area changes: frames of 954, 1015 and 684 ms with 853, 960 and 663 ms of pipeline wait, six mesh draws waiting 52 to 660 ms in passes whose targets had been rendered in thousands of frames.
The target history (now runtime/vk_target_frames.h) also counts the frames each target was rendered in, for as long as it is the same guest texture. From eight frames on its pass is per-frame however long ago the last one was, and its draws are skipped and built by the workers like any other (pipe_skip_steady, on by default). A target rendered for the first time still waits, now from one pool of 50 ms a presented frame that the full-screen draws share (pipe_frame_wait_ms; oneshot_budget = 0 gives the old wait back), a mesh draw 8 ms at most, and the wait for a one-shot draw's shader comes from the same pool (gfx_shader_await takes a limit). A full-screen draw with no picture left to hold waits 40 ms more instead of 500. One frame so waits under 100 ms for pipelines in all.
Every 600 frames with a miss the log says how many draws found a shader or pipeline missing, how long they held the replay thread in all and in the worst frame, by the kind of wait, and how many were skipped at its end.
tests/target_frames_check.py replays the area change of that log against the header. Not yet run in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Eight commits: a draw that misses its pipeline has the rest of its submission read ahead, the library workers link
the pipelines of skipped draws, a pipeline whose fragment shader reads a target of its own pass is fast-linked like
any other, and diagnostics. The merge was clean. Their before and after matrix had not finished when this was merged.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Each frame the game sets one of two events to 0 from the CPU, submits its worker queues and the main queue, whose first command waits for that event to be 1, and signals 1 with nvnEventSignal once it has written what the frame's commands read. The recording of a submission takes the VRAM mirror sync and the uniform snapshot at its start and tested the wait a moment later, so a signal that arrived in between passed the wait and the frame was drawn from copies taken before the signal: single frames with the whole scene's shadowing missing (6 to 7 of 255 brighter, the sky and the interface unchanged) or a black scene, more of them the busier the CPU.
Every nvnEventSignal is now numbered and keeps the value it replaced, the recording notes the number before it takes its copies, and a signal with a later number does not count for that submission. The submission stops at the wait like any wait reached before its signal and goes on at once in a submission of its own, whose copies are taken after the signal. NX2NAVI_EVENT_AT_SYNC=0 gives the earlier test. NX2NAVI_EVO_TRACE=1 logs the order in which every frame's submissions, waits and signals were replayed, which is how the frames were found.
Measured with the flight recorder's thumbnails, 1,800 presented frames a run, standing in Hyrule Field by day with the lazy write-back on, DLSS Performance, frame generation 4x and HDR: the build before this change showed 34 single-frame spikes with eight busy threads beside the game, 20 with four and 8 with six, most of them in frames whose signal came during the replay; with this change two runs with eight busy threads showed 0 and 0, with 667 and 724 such frames. A session of the user's with the lazy write-back off ran 25,200 frames without a spike in its three automatic dumps while the change stopped 4,744 wait tests.
Not measured: runs of this same build with the switch off (the two tried failed for other reasons, a device loss during the boot beside another game and a load with cold caches), any run with the lazy write-back off under load, the frame rate and GPU time against the switch off, and the differential tests, which this change does not touch. The flicker with the lazy write-back off that was reported has not been reproduced in a capture; its mechanism is the same signal and occurs there too.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The next draw with a new pipeline was only found when the replay reached it, so the draws of an area's first frame,
or of a turn that brings several new materials into view, paid for their pipelines one after another while the
workers that could have built them together sat idle. The submission is recorded before it is replayed: the first
draw of a submission that finds a shader or pipeline missing now has the ops after it read (vk_exec.c vk_exec_ahead)
with the binds that decide a draw's shaders and shader libraries applied to a copy of the replay state. Each draw
there looks its shaders up as the real draw will, which also queues a shader that is not in memory, and names its
state to vk_pipeline_hint, which queues the pre-rasterization and fragment shader libraries that are missing. No
pipeline is entered and no key recorded, so a wrong guess costs two libraries at most. The draw's own lookup then
links on its thread when both libraries are there.
On a first visit to Kokiri Forest a scan read 6,900 ops in 0.78 ms on average (the longest 5.5 ms; a scan ends
after 3 ms), and the scans of the load and the walk named 377 states without a pipeline and queued 104 libraries
for them.
pipe_ahead = 0 (NX2NAVI_PIPE_AHEAD) turns it off.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The texture pool creates 16 entries a refresh and stops after 6 ms a frame, so that textures streaming in do not make
long frames. An area load leaves thousands of slots at once (4,936 loading the test save), and at that rate they came
in over the frames after the load screen: the scene's first frames showed a quarter of the picture as black stand-ins,
for 22 presented frames on a free machine and for about three seconds with the CPU busy.
While a refresh leaves pool_load_backlog slots or more (512; 0 never), the pool is loading: the count limit is off, a
frame's refreshes may take pool_load_ms (50), and frame_hold leaves out the presents of frames drawn meanwhile (up to
2 s), so the picture before the load stays until fewer than 64 slots are left. Measured with the flight recorder's
thumbnails of every present: the 4,847 textures are made in one frame of 345 ms, 30 frames before the scene fades in,
and the black share of the picture goes from the fade straight to its final value. The streaming limits are as before
below the backlog.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A draw whose shader or pipeline is still building is left out of its frame, and the frame was shown without it: a black or unlit picture with the interface intact when it was a lighting pass, a light going out, or ground missing for a frame. In a player's session a full-screen draw was skipped after its 50 ms and the frame came out black as a boulder hit.
The frame's present is now left out when draws were skipped (vk_backend.c frame_hold, NX2NAVI_FRAME_HOLD_MS, 120 by default, 0 off). The game runs on, so nothing waits. The hold comes from an allowance that fills again at an eighth of the clock's rate, so a long build or a run of them shows its frames as before and does not freeze the picture; a full-screen draw that would be skipped with the allowance spent waits on instead, 500 ms at most. Not with DLSS Frame Generation.
On a first walk through a village with no pipeline recorded, 21 of the 23 frames with skipped draws were held back; in the Lost Woods, 7 of 8.
The performance overlay: the VRAM line is the card's dedicated memory in use, which counts every program on it: a player read 14.5 GB as the game's while the game held 7.3 GB. The line's third cell now gives what this process holds on the device-local heaps (the driver's budget figure), in place of the GPU clock, which stays where the driver gives no budget.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Main brought the fixes of eleven pull requests (the texture pool set sealed when an early replay part is submitted, every location reflected in interface arrays, RGB9E5 texels recognised for integer storage views, the upscaler a frame started with kept, GPU pass timestamps without vendor breadcrumbs, the Linux build, window and NGX fixes), render targets released when drawn over at another address, the vertex layout kept in the pipeline on newer AMD drivers, and the upscaler choice read once per evaluation.
Four hunks conflicted and take both sides: pool_sync returns for a sealed set before the per-frame creation budget's clock (vk_exec_draw.c); make_module keeps the test line's early_ok argument and main's module hash (vk_pipeline.c); a texture taken back counts as sampled again and records how long it was away, and the texture line logs the disuse counters and the overwritten render targets (vk_texture.c).
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A replay part handed to the queue early kept reading the bindless pool set while later parts of the same submission wrote new entries into it. That updates descriptors a pending command buffer reads, and on RADV a texture whose memory was mapped after the part was submitted is absent from its page tables. This caused a gfxhub read fault in the 128x128 pass of the first world frame in Kokiri Forest.
Seal the set when a part goes, take another ring set at the next sync that has entries to write, and keep recording the same part while every other set belongs to the submission. Document the descriptor lifetime contract in maxwell.md 4.9.
Fixes#257.
The texture pool refresh looks up every registered slot, so the textures of every area the game keeps loaded never
counted as idle and their memory only grew. Marked shaders now store into a buffer with one word per pool slot. Every
four submissions that recorded work, the replay copies it out and clears it, and the texture side notes when each
texture was last sampled. Under VRAM pressure or low commit, once idle textures are gone, live textures that come back
intact and were not sampled for 1800 presents go too. Their keys are held, so the pool refresh keeps the stand-in until
a shader samples that slot again, and the next refresh makes the texture again.
Fragment shaders that neither discard nor write depth, sample mask, stencil reference or memory keep early depth tests
(EarlyFragmentTests), so the marks do not take away early depth rejection. Alpha to coverage leaves the dynamic state
while marks are on, so each pipeline knows whether early tests are safe. Disuse eviction waits until every module that
indexes the pool was marked and two reads arrived. NX2NAVI_TEX_DISUSE=0 (tex_disuse = 0) turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 1a4c896150a748f9275c3024e96af3055db94af4)
Performance: draws reuse the bindings that did not change and record only the dynamic states that differ from what
the command buffer holds; small uploads come from a staging arena; finished submissions are held briefly and handed to
the queue in batches; the recorder thread can keep a CPU core of its own; ASTC block-linear textures are deswizzled on
the GPU; dynamic resolution steps the upscaler mode to hold a frame-time target. Each has a setting in nx2navi.ini
(bind_reuse, dyn_delta, stg_arena, submit_batch, recorder_core, recorder_prio, astc_gpu_deswizzle, dyn_res) and the
staging cache now frees what it holds at shutdown.
Capture: NX2NAVI_DUMP=key saves the frame after each press of Insert, with mesh draws listed by task, mesh and fragment
shader, depth test and face culling, and mesh_prims.txt giving each mesh draw's primitive, clipping and fragment counts.
All of it is off unless NX2NAVI_DUMP is set.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The event order (vk_exec.c) holds a submission at a wait whose signal has not been replayed. In Kokiri Forest dialogue several presents a second came with the frame's whole submission held (4 held submissions, nothing drawn since the last present): the present showed the picture from before, a flash of the whole picture, and the frame was drawn afterwards in the present thread's empty submission, next to the following frame. With the event order off (NX2NAVI_EVENT_ORDER=0) the same spot had no such frame in 3600.
present_held (vk_backend.c, synchronous replay only): at a present with held work, what can go on runs first in a submission of its own; if work is still held, the present waits and goes out after the submission that replays the last of it, at the next present, or after 8 submissions. present_held = 0 (NX2NAVI_PRESENT_HELD=0) turns it off.
held_sync (vk_exec.c vk_exec_record): a submission without commands of its own that resumes held work now gets the VRAM mirror sync before and the write-back after, and a uniform copy, like any submission. Before, that work read mirrors that had missed the CPU's latest writes, and its GPU writes were dropped from the write-back list by the next submission's vk_mem_mirror_begin. held_sync = 0 (NX2NAVI_HELD_SYNC=0) turns it off.
Not yet measured in play.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In Kokiri Forest dialogue (Saria, dlss = performance) about 1 frame in 20 had no camera, and DLSS started a new history twice for each: 24 to 26 camera resets per 300 frames. The camera block was looked up in the uniform copy of the submission DLSS ran in, which on those frames had none: the frame's work had been held past its present by the event order and ran in the present thread's empty submission. vk_dlaa_draw now keeps the camera rows as the first scene draw read them (vk_usnap_read), and mv_pass uses those. A frame with no scene-context draw at all keeps DLSS's history with zero motion, for up to 6 frames in a row.
Measured at the Saria spot: camera resets went from 24 to 26 per 300 frames to none in 3600 frames (the first frame only). The whole-picture flashes stayed: they come from the presents that go out with that work held, handled separately.
The log now explains frames without a camera, frames without the DLAA point (with the held submissions at that present), light target changes and a second scene after DLSS ran, plus a line every 300 DLSS frames with resets. dlaa_cam_keep = 0 (NX2NAVI_DLAA_CAM_KEEP=0) restores the old camera handling.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ocarina runs compute work on a second queue that trades results with the main one through events: the worker's command buffers wait (WaitEvent) for signals the main queue gives in its submission a few submits later, and the main queue waits for the worker's signals in turn. Replayed one submission after the other, the worker's steps ran before the work they wait for and read the previous frame's results, and the characters came out much too dark at any time of day (Kokiri Forest: about 13 waits a frame, 7 of them reached before their signal).
A top-level wait whose condition does not hold in replay order now stops its submission: the rest is held, with private copies of its recordings and the queue's state, and the queue's later submissions line up behind it. After each replayed signal the held work whose wait now holds goes on inside the command buffer being recorded, between full barriers, with its own state swapped in. Work still held after 36 submissions goes on regardless, as before (counted in the NX2NAVI_TRACE=perf line). The queue reaches the back end as gfx_submit_queue. Only with the replay on the submitting thread; NX2NAVI_EVENT_ORDER=0 turns it off.
Tested by play in adult Hyrule Field with the tree fix of the previous commit: Link lit normally at dusk and at noon, trees steady, lighting otherwise unchanged. The white specks in the grass remain (they predate both changes).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Small ranges the game invalidates and reads back (the exposure meter) are copied from guest memory into the mirror at every submission that uses their pool, so a CPU write made between recording and the GPU's run is not lost; NX2NAVI_READBACK_SYNC=0 turns it off.
While the boot builds the recorded pipelines a marker file exists next to the pipeline cache. A start that finds it left over records the GPU and driver in pipeline-prewarm-skip.txt, and starts on them build those pipelines at their first draw instead.
CommandBufferWaitEvent is now recorded as OP_WAIT_EVENT. The replay waits for nothing but counts the waits it reaches before their signal, and how many submissions later that signal comes, in the NX2NAVI_TRACE=gfx frame line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Opt the process out of Windows power throttling (execution speed and
timer resolution) at startup; NX2NAVI_POWER_FULL=0 turns it off.
- Fence completion thread wakes waiters before collecting freed memory,
so collection no longer delays them.
- Add a by-region barrier when a draw or clear writes an attachment that
an earlier draw in the same pass sampled; count it and inline uniform
updates in the per-frame stats.
- Hash small texture contents at upload and skip re-uploads whose bytes
are unchanged (removes ~420 redundant uploads per frame in Kokiri
Forest); NX2NAVI_TEX_SAME=0 turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each file that contains copied code names its copyright holder and license and points at THIRD_PARTY_NOTICES.md; zlib code keeps its full notice and the mark that it was altered. Comments and probe text only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Comments say what the code does and why, docs/maxwell.md keeps the Maxwell facts, and fetch_refs.sh clones only the checkout the build reads. Code is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The texture pool descriptors are now a ring of sets, one per submission, brought up to date from a change log, and the first submission of each frame waits for its GPU work before the game goes on: the GPU ran late and part of a frame read data of the next one, and distant characters drew NaN that bloom spread over the frame. The window acquire also waits for the image's previous frame. Function locals start at zero unless DLAA is on, which removes the per-warp light tiles on the Great Fairy Fountain floor and Link's dark, speckled look. Texture slots follow only live entries of their own target, so the volumetric fog gets its 3D volume. The pool refresh walks only the slots that changed.
The translator implements PRMT (patch 0021), which it only logged before; the button prompts render again. HFMA2.RELU no longer depends on it, HMMA.F16 rounds once and HMMA.F32 is lowered, checked against GPU vectors with a new Maxwell warp emulator.
The frame dump gains a re-arming white-frame trigger, a trigger on a depth target's first pass, NaN pixels in magenta, image handles and view targets, and depth copies of sampled depth textures.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The NVN2 front end and the SM86 to Maxwell shader lowering (tools/xlate/AmpereLowering.cs, mesh and task stages,
bindless texture pools, BRX jump tables, the NVN2 compute c0 layout) with four translator patches (0017-0020) bring the
opening of the game to 58-60 fps on the Vulkan renderer.
This round fixes the haze: SM86 IPA is lowered as a plain Maxwell IPA.PASS (texture coordinates were corrected for
perspective twice); LDSM, TXD, both F2IP byte forms, HMMA, MOVM and HFMA2.RELU are lowered and spill mode has eight
uniform register groups; conditional rendering keeps the newest counter report per address and treats a report as
pending until its value is in guest memory, so occlusion tests and the depth clears around the depth copy behave; and
the upscaler stand-in decodes the post pass's sRGB picture before writing the linear target. Tensor-core programs keep
the stand-in unless NX2NAVI_NATIVE_TENSOR=1, because their lowering does not match the hardware yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>