With frame generation running and no DLSS or FSR upscaling, vk_dlaa.c arms and ends the frame in the same places and,
where the upscaler's evaluation would run, makes only frame generation's inputs (fg_only_frame): the scene's depth and
camera found as before, motion vectors from the same pass at the scene's size, no jitter at all, and the picture without
the HUD copied from the game's own scaled picture. DLSS Frame Generation and AMD's frame generation no longer need an
upscaler set; NVIDIA's through NGX still needs DLSS at the start and then keeps running when the upscaler is switched
off. The menu's Frame generation row stays usable with every Upscaling choice and the Upscaling row keeps frame
generation as set, with texts in all four menu languages. The log says at the start and at each change whether frame
generation takes its inputs from the upscaler or runs without one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The row writes scene_share = 1 with dlaa = 0, which the start already sized the render-target heap for; widescreen.c now
reads the share live, says when the heap needs a restart for it (the row's note and the Restart count), and logs the
scene size, the picture size and how the scene is scaled once the fixed share takes over and at each change. The
stand-in copies a scene of the picture's size texel for texel with a nearest sampler, and the performance overlay shows
Ocarina's real scene size instead of the other builds' placeholders. scene_share gets its settings row and its ini
text; the row's texts are in all four menu languages.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Auto gives half the physical cores less one, at most 6: 2 on 6 cores, 3 on 8 (the count measured best on an 8-core CPU), 5 on 12. Four cores or fewer get none, and so does AMD's Windows driver for RX 6000 and older, where a player's device was lost with workers on and the cause is not known. The menu's row lists Automatic first with the count it gives on this PC, and the log says how many were started and why.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The rows keep their plain names. Their descriptions now say what the number counts and that 0 turns the setting
off: 0 to 4 for replay_pipe, 0 to 64 in steps of 4 for replay_small.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The rows are now CPU helper threads, Helpers work ahead, Helpers take small jobs and Start next frame early, each
with a short description of what it does and what it gained. Helpers work ahead and Helpers take small jobs are
switches: on writes replay_pipe = 4 and replay_small = 16, the values measured best, and another value set in
nx2navi.ini shows as on and stays.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Low, the default, lets released textures go after the hold and frees what switched-off upscalers and SMAA hold; High
keeps both for the session. The row shows Low for any setting but high, the old balanced among them. The descriptions
in all four languages no longer promise simpler surfaces or missing objects, since the default no longer trades them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Worker groups in flight (replay_pipe), Small groups to one worker (replay_small) and Early frame end (tail_early)
sit under Replay workers. A row whose setting does nothing without another one is greyed out and says which it needs.
The example settings file and the draft release notes name the rows, and the notes gain the replay_pipe and
replay_small entry.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Balanced, the default, is what the earlier commits made the default. High keeps what DLSS, frame generation's
HUD-less picture, FSR 1 and SMAA made after they are switched off, as before them. Low also sets, for the keys the
player leaves unset: released textures keep at most 1 GiB (tex_released_mb), textures give way from 70% of the video
memory budget (tex_vram_pressure) and the shared pipeline list is built at first draw (pipe_seed_boot = 0). Unsampled
live textures are not dropped in any of them: that eviction left the ground see-through for good. The values come
after the device profile and the low-end mode (cfg.c VRAMLOW); the row is in the Screen tab under Texture detail and
takes effect after a restart. The architecture notes describe the new memory report lines.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The stance site called page +0xf50, which the 0.10.0 line gives the water ripples above 60 fps: the second
registration ends every 1.1.1 start with "registered twice", the sprint button off included. It calls +0xf30 now, and
the comments say which slots the other sets hold. The set's switch is NX2NAVI_SPRINT_BUTTON_PATCH, not a name another
open request uses for a set of its own.
The stand-still timings count 60 Hz frames (frame_step_frames), so a toggled sprint no longer ends on a short stop at
high frame rates. A press is decided at its start for its whole length: kept from the game and the sprint's when it
begins in gameplay (B: while Link moves), else the game's alone, so a held B is not handed to the game half way and a
B that closes the pause menu starts no sprint. A sprint switched off with the button setting does not come back by
itself, Link's state is read only where the memory is readable, and the row, nx2navi.ini.example and the controls
page say that B is the jump under the game's Swap Jump Controls and name the button without assuming the layout.
tests\sprint_check.py covers the press latch, the menu press, 240 fps and the switch-off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
It can show a dark or flickering frame now and then, so the mode no longer turns it on with its other defaults. Its row under the mode's switch still turns it on for a player who wants it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Off, On, and On with boost where the mode is NVIDIA's, in English, Russian, Brazilian Portuguese and Simplified
Chinese. The row is greyed out with the reason where the mode cannot run: a driver with neither extension, a run in
which DLSS frame generation brings its own low latency, and NVIDIA's while a frame generation presents the frames. A
mode the driver refused says so under the value.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The default strength is 130 to make up for what two motors lose. A linear actuator that takes the game's value needs none of that, and 1.3 times the amplitude clipped the strongest pulses at the safe maximum. The HD path now divides by the default, so the setting scales from the game's own amplitude.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The row switches rumble_hd and is greyed out, with a note of what it needs, while the gamepad in use is not a Switch
Pro Controller or Joy-Con. Its texts are in all four menu languages.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A staging buffer that does not fit the staging pool's blocks waits for the oldest upload batch with the upload lock
held, and a replay submission that sends its uploads waits for that lock. The wait cannot leave the lock: the caller
holds the open batch's command buffer and the buffer it asks for belongs to that batch. What the wait costs on an area
load was not measured anywhere, so it is timed and logged now: the first four waits, then at every doubling of their
count, with the total and the longest.
Since staging stays inside the pool's blocks every batch is submitted at 64 MiB of staging, so upload_batch_mb = 0 is
that limit and not "no limit", and the values above it (the low-end mode's 256, the menu's 128 to 1024) change
nothing; a discrete card keeps 256 MiB of staging for the run, not 128. The settings table, the menu's text,
nx2navi.ini.example, the audit's table and the comments say so.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A start that finds the pipeline cache written by another device or driver has nothing built, and everything was
compiled beside the game: an 8-core integrated GPU drew fewer than 600 frames in its first 11 minutes. Such a start
now waits on the "Preparing shaders" screen, with counts, for every recorded pipeline, for the compute pipelines on
every core at normal priority, and, when a sample says the driver's own cache lacks the prepared stage libraries, for
all of them on every core. The memory gate still holds for the builds, and the library builds write the preparation's
journal while the start waits, so a variant the driver's compiler dies on is skipped from the next start on.
boot-warm-owed.txt beside the caches names the GPU and driver: a start closed during the warm is followed by one that
goes on with it, three at most, and "done" keeps later starts ordinary while the cache file still carries the earlier
driver's header. When the boot stops waiting (prewarm_wait_ms, or a minute without progress) the builders step down
to the background's thread counts and idle priority. prewarm_full = 0 turns the warm off.
With nothing in the driver's cache the probe took 425 s on an RTX 5090 with 16 CPU threads: 87 s for 5,775 recorded
pipelines, 19 s for 4,075 compute pipelines and 317 s for 42,231 prepared variants.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Players' games crashed with three workers on by default in 0.9.1 and 0.9.2: an RX 6700 XT lost its device after
about 18,000 frames, its last mark a compute dispatch of the replay, with an occlusion query slot found unavailable
after its fence just before. The cause is not known yet, so replay_workers is 0 again unless a player sets it. The new
Replay workers row (0 to 8, experimental) writes replay_workers and waits for a restart, as the other restart-only rows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On a card with mesh shaders and 8 GiB of video memory or more the Game tab's switch cannot turn the mode on; it stays usable while the mode is on, to turn it off again. A player with every setting at its highest had it on on a GeForce RTX 5090, where the mode moved the sun shadow map and the scene depth to memory of their own and the ground's shadow became a dark patch with straight edges that turned with the camera.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The settings had a tab of their own; they are rows of the Game tab now, listed under the switch once the mode is on after a restart, and the tab is gone. With the mode off every one of them reads as unset, whatever nx2navi.ini or the environment says, so nothing of the mode acts unless a player turned it on; the build reads guest_opt the same way. The notes describe that, and take the white edges in towns and the dropped textures from the known issues to the fixes.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The row sets low_end_gpu, read at start, and says what the mode turns on and that it was measured on one card; its text is there in the menu's four languages. The key is decided again once the settings file is read.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The three change what every card does: the asynchronous replay can show a dark or flickering frame now and then, the hot-pool rule moves pools into system memory on every discrete card, and -O2 makes each rebuild of the game several times longer. Their rows stay in the settings tab. The USB joystick mapping is described by the device's own name, and the tab's introduction says what its settings are for.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A pool read in place gives the GPU the game's bytes as they are when it reads them. The demoted pools were ones the
CPU refills every frame, which the game rewrote for the next frame while the replay and the GPU still drew the last:
small grass and moss flickered and slid over the ground, and with 0.8.0's mesh fallback every mesh flashed. Pools with
more than 64 KiB of CPU writes a frame (written pages and flushes) now stay mirrored.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The heap limits were fixed at device creation, and only texture images looked at the budget. FidelityFX allocates
outside VMA (FSR 3.1 contexts, frame generation): 882 MiB of it with 4644 MiB of VMA's filled the 5526 MiB budget of
heap 0 while heap 2 had 1757 MiB free, and an upload submit failed with VK_ERROR_OUT_OF_DEVICE_MEMORY. vmaCreateImage,
vmaCreateBuffer and vmaAllocateMemory now go through vk_vma_budget.c, which leaves out a device-local heap whose
driver-reported use is within NX2NAVI_VRAM_RESERVE_MB (default 512) of its budget; a Lama patches row sets it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each emulated mesh draw ended the pass, ran its stages between four barriers and began the pass again: a pass of 20
emulated draws became 20 passes, and on an RX 580 6 to 7 ms of a frame's 30 ms of GPU time went to the gaps between
passes (gpu_passes in Kokiri Forest: 8.7-10 ms per frame outside the game's passes and dispatches, 6.3-7.7 ms of it in
273-306 gaps with barriers only; 71 emulated draws a frame, 36 of them indirect). Now the first emulated draw of a pass
ends the part there (vk_exec_split_now), so the pass begins a new part, and the stages of every emulated draw of that
pass, the indirect ones' ring entries included, go into the part's pre-pass command buffer (vk_sync_pre), which the
queue runs after the mirror prologue and before the part; the pass is not split again. NX2NAVI_MESH_EMU_BATCH=0 (Lama
patches: Mesh emulation before the pass) brings the split back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Released textures kept, top texture levels left out, hot pools in system memory, the heap limit, the upload batch
limit, the kept ASTC buffer, mesh emulation and its arena and task records (greyed where the GPU has mesh shaders),
the overwritten-texture fix, the vector index fix, -O2 game code, pass times and the frame dump key. Each key gets a
row in the settings table; make_game.py reads guest_opt from nx2navi.ini when the environment does not set it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Choosing one of them while a temporal upscaler was set turned the upscaler off, and the picture fell back to bilinear scaling. vk_aa.c no longer keeps the game's SMAA while DLSS or FSR runs. The chosen pass replaces the game's composition as without them: in the native modes after the upscaler, and in the scaling modes before it. In the menu, a choice leaves the upscaler and frame generation alone, and the row notes that the upscaler's TAA runs too. Picking DLSS or FSR under Upscaling keeps the Anti-aliasing choice. The TAA entry, listed while no temporal mode is set, now sets FSR 4 Native AA where FSR 4 runs instead of forcing FSR 3.1. The overlay gets an Anti-aliasing line under Upscaling, for example "TAA + SMAA (Ultra)".
Checked on an RX 7900 XT in Hyrule Field with FSR 4.1 Native AA and Quality, and with FSR 3.1. The log has "the game's SMAA replaced by" smaa, off and fxaa while FSR 4.1.2 upscales, and the pictures are right.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ocarina anti-aliases every frame with its own SMAA in three compute passes after the bloom composite. The new aa
setting (nx2navi.ini aa, the Screen tab's Anti-aliasing row) keeps that by default. off, fxaa and smaa leave out the
game's edge and weight passes and replace its composition with a pass of our own that writes the same square-rooted
RGB9E5 words into the scene target: a plain copy, an edge smoothing written here, or the SMAA reference implementation
with its area and search textures (MIT). taa is DLSS or FSR 3.1 at the scene's size, which the row sets through the
upscaler; while either runs, the game's SMAA stays whatever aa says. The game's passes are known by a hash of their
guest code. The shader build now also rebuilds a header when a file its source includes changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The HDR row lists Off, RenoDX (the game's picture tone mapped to the display, the one fixed look) and Native (the game's own HDR, taken up at the next start), with the peak, game and HUD whites under either.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HDR on is the game's scene through the observer-response mapper, anchored to the game's own mid grey and tone slope, with half of the hue bend of the game's clamp: the defaults the menu had. The tone mapper choice, the mid grey, the tone slope and its match, the hue clip, exposure, highlights, shadows, contrast, saturation, highlight saturation, blowout, flare, hue, grade and gamma are gone from the menu, the settings table and the example ini; a file that still sets them works as before, the keys read by nothing and logging nothing. The menu's HDR row is Off and On, with the peak, game and HUD whites under it. The game's own HDR is still there for a file that sets hdr = native, and the row lists it only then. The luminance mapper and its grading code, which no setting reaches any more, are removed from the tonemap library, and the support buffer carries one vec4 for it.
The dark tones of a dark scene sat far above black: the present showed the game's sRGB-encoded picture as that encode decodes, linear near black, while the game is graded for a display of gamma about 2.2, and since the observer-response mapper became the default the 2.2 correction ran with the luminance mapper only. A scene value of 0.003 came out at 0.29 nits at a white of 350 nits, where a 2.2 display shows the game at 0.015. The present now always shows the picture as a 2.2 display would, and the tonemap aims its peak lower by that correction's inverse, so the brightest light still reaches the display's peak; the same value comes out at 0.017 nits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Resolution row lists each picture height as the size of the game's shape at it (21:9: 2560 x 1080, 3440 x 1440, 4300 x 1800, ...; the window's own shape where the picture follows the window) and sets both the picture's height and the window outside fullscreen, which follows at once within the monitor; the picture's height takes effect after a restart as before, and Native leaves the window as it is. A build without the widescreen patch sets, which draws the game's own size, keeps the Window size row.
The Upscaling rows and the overlay name FSR 4 by the major and minor version of the provider the driver lists (AMD FSR 4.1 for 4.1.2), and AMD FSR 4 until the library was asked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
mouse_mode = direct is the default, but on 1.1.1 it did nothing: only the 1.4.3 patch table had the sites, so the mouse always went through the stick emulation, which gives no turn at slow mouse speeds and tops out at about 107 degrees a second. The 1.1.1 table now has the set mouse_direct (on by default): at main+0x37c45c, where the camera's input update holds the processed stick in s1 and s0, a host call performs the displaced store and adds the raw mouse counts to both, so the mouse meets no dead zone and no curve; at main+0x37c4f0 a second call clears the idle bit for an update the mouse moved in. The counts are divided by the frames the game steps per update and by the stick camera speed, so the same hand movement turns the same angle at every frame rate. The Controls tab gets the mouse mode and mouse sensitivity rows, and mouse_mode = stick or NX2NAVI_MOUSE_DIRECT_PATCH=0 gives the old behaviour.
Checked here: the generator lifts the 1.1.1 game with the two sites (it compares each site's original word), the lifted game compiles and links with the runtime, and tests/mouse_direct_check.py passes its 1.1.1 harness (register contract, displaced store and load, equal turn at every frame rate and stick speed, the reset pause, capture and mode). Not checked here: the game was not run, so aiming with the mouse was not tried, and the differential tests against Unicorn were not run because no Python on this PC has Unicorn. The contributor measured 0.0800 degrees per count on both axes in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit bb8fecfbe43517006eafd7be9c22e8dbe9601de7)
Without the other players drawn in the world, which are unfinished. No relay address is built in, and with co-op off nothing opens a socket. Built on Windows and tested against a relay on this PC only; two games in one room and any real network have not been tried.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A second reading of the commits taken in from pull requests found these, each traced in the code:
- heap_lazy: the camera speed's search read the whole heap, which with the setting on committed every page and undid what it saves; a scan now steps over the pages the lazy heap never committed (mem_untouched_run). tests/frame_step_check.py and tests/save_share_check.py no longer linked (frame_rate.c and fs_host.c call the new memory functions; the second also missed mem_probing before); both pass again. The settings text says that with the setting on a PC out of commit ends the game in play, not at start, and the census comment is back over its own function.
- Pipeline libraries on AMD's older Windows driver: the condition is the driver for RDNA 2 and older (RX 400 to RX 6000), not RX 5000 and RX 6000 only, and the texts named a price the code does not have. With libraries off a new pipeline is built by a worker while its draw is left out, and the start waits for every recorded pipeline instead of 20 s at most. The texts say so, and that the finding is one player's on one card. The menu strings nothing shows are as they were.
- Page file hint: it comes only when Windows sizes every page file, and it names the initial size and the automatic management that must be unticked first.
- Frame generation note: it keeps "needs an RTX 40 or newer" for the players it is right for and points the others to the log; the bridge's line says it is Streamline's general support check.
- Comments and settings texts that still described the old behaviour: the process commit bound, the wait with shadow storage, the scratch's least size, the action prompt under auto.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 19f03aa01b26d6e17fb5fc70ad987aa8c68e8225)
Each player keeps their own game and save. One player makes a room, the others join it with its secret, and story flags and, by the room's rules, items, songs, quest items, small keys (a shared pool), rupees and ammunition reach every save. The layer is a host thread with one UDP socket to a relay the players run themselves (tools/coop_relay.py, Python's standard library only); the messages between the players are sealed with a key from the room's secret (XChaCha20-Poly1305, Monocypher 4.0.2 vendored with its licence and a row in THIRD_PARTY_NOTICES.md), every change is signed by the player who made it, a player accepts a room by its members' keys and the key of its rules, the save is copied to coop-backup before anything is applied, and values are set through the game's own routines between frames. The Co-op tab makes, joins, accepts, removes and leaves, and the menu takes typed text for the name, the relay and the secret. This is the contributor's pull request #518 on this line.
Nothing reaches the network while co-op is off: the socket is opened, and the relay's name looked up, only after co-op is on, a relay is set and a room is made or joined. There is no default relay.
Left out of the pull request: the other players drawn in the world (the "puppets") with the copied engine they need. They were unfinished, added two patch sites to the game's per-frame update that could not be put through the differential tests here, and their file helpers clashed with the ones this line already has. So no position is sent: the POS message's codec stays, nothing sends it.
Changed against the pull request:
- The menu's test hook drives the Co-op tab only when it comes from the environment. From nx2navi.ini it could turn co-op on, join a room and accept its offer.
- The log's label for a room is hashed from the secret instead of being its first three characters.
- A game that has not saved yet has no save to copy, and takes nothing from the room until it has saved once; that used to count as a copy made.
- A PING's token no longer carries the PC's uptime.
- On Windows the maker's key file and its folder get an access list with the player's account alone.
- The tests that link the platform layer get the socket library, and the save test a stand-in for the title screen's hook.
Checked on Windows, where the pull request had never been compiled: the runtime builds and links; --probe-coop passes (sockets on 127.0.0.1, the codec against its byte vectors, a fuzz of every parser, two sessions through a hostile mock relay, a relay restart, the sync engine); tests/coop_relay_test.py passes its 61 tests, with the probe through the real relay on 127.0.0.1 at 0 and 30 % loss; tests/coop_page_check.py passes and its deliberate fault fails 48 checks. Not checked: two games in one room (one game runs at a time here), any real network, the tab in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The two sides both made the wait after a frame's first submission cover the write-backs under shadow storage; the rule is kept in one place, vk_sync_wb_split.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The HDR tonemap gains a mapper built on a finite cone response in LMS: scene grey 0.18 lands where the game's curve puts it and rises through it with the slope of the game's curve, and the hue bend of the game's clamp is given back to bright colours. It takes the scene before the game's exposure gain and the gain itself, which the splice now finds in the game's shader. The luminance mapper stays selectable and the game's own curve stays the third choice. The mapper fits the Rec. 709 gamut here, as the game's scene target holds no negative component. New settings: the tone mapper's mid grey, tone slope match, tone slope and hue clip emulation. The gamma correction on the present applies with the luminance mapper only.
Not part of this: eye adaptation, the anti-aliasing and reconstruction shaders, bloom and local exposure sliders, the output colour space choice and a 16-bit float scene target. Checked by build and numerically against the source of the port; the picture on an HDR display has not been judged. THIRD_PARTY_NOTICES.md names the source.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
When Streamline loaded but DLSS Frame Generation was not available, the menu's row read "in use: off, needs an RTX 40 GPU or newer", also on an RTX 5080: the same check fails when the plugin did not load or a function it needs is missing. The row now points to the dlssg lines of the log, where the bridge says whether the plugin loaded and which of its functions it found, and then asks Streamline for its support result on the selected Vulkan device and logs it by name. The query is an optional export, so a bridge DLL of an earlier build keeps working.
The runtime and the bridge (tools/build_dlssg.py, MSVC, Streamline's headers) both build here. The failing case itself was not reproduced: on this RTX 5090 frame generation is available.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
That driver faults inside vkCreateGraphicsPipelines when it links the stage libraries of a burst of new pipelines. The game asks for one when an enemy dies and its effects are drawn for the first time, so the game ended with code 71 at every kill on an RX 6700 XT and an RX 5700 XT (issue #418), and the player who reported it found that gpl = 0 stops it. Unset, the setting is now off with that driver (vk_caps.amd_sc) and on everywhere else; gpl = 1 turns it on there, gpl = 0 off anywhere, and the caps line of the log says why it is off.
The price on those cards is that a new pipeline is built whole on the draw's path. Not run here: there is no AMD card. On an RTX 5090 the device probe reads "gpl yes" as before and "off by NX2NAVI_GPL=0" with the setting.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>