Commit Graph

25 Commits

Author SHA1 Message Date
tangerineturtle1
589c9e8654 Stop the replay from searching the environment on every draw, remember setting lookups, and spread texture streaming over more frames.
The draw path called getenv("NX2NAVI_SKIP_PROG") for each of ~2,000 draws a frame, and getenv walks the whole environment block: in a replay-thread profile it was a sixth of the samples. That switch, the polygon offset log and the ASTC alpha probe now read the environment once. The replay's cost per draw went from 3.7-5.0 us to 1.2-2.8 us in play, and the mean frame rate by minute from 60-131 fps to 103-243 fps (different places in each run, so the figures are approximate).

cfg_get and cfg_value keep each thread's answers per name until the settings version changes (cfg_set, cfg_reset, cfg_load, and cfg_setenv, which the code that sets NX2NAVI_ variables in the process's own environment now uses); NX2NAVI_CFG_MEMO=0 asks every time.

The texture pool creates at most pool_create_budget (NX2NAVI_POOL_CREATE_BUDGET, default 16, was a fixed 64) new texture entries per refresh. The refresh holds the texture lock throughout, and streaming new textures in made 20-40 ms frames; at 16 the lock was held 5 ms per slow frame instead of 24 in a dense area, and the frames over 25 ms in a heavy minute fell from 111-188 to 89, with no pop-in seen.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:09:26 -05:00
tangerineturtle1
480a197994 Add replay diagnostics that found this session's frame-time dips, all off by default.
lock_time (NX2NAVI_LOCK_TIME) makes the replay threads time each lock they have to wait for, kept per asking site (platform.h plat_lock_timing, plat_mutex_lock_at and plat_rmutex_lock_at carry the site), and the frame-time summary lists the sites with the most wait, the recorder's full-ring and drain waits, and the texture lock's holds over 1 ms with the code that took it. replay_time now also keeps each frame's replay ops: a frame over 25 ms charged to the replay says how many draws, binds and transfers it replayed, their time, its slowest op, and how much of the replay's wall time the thread was on the CPU. NX2NAVI_PROFILE_REPLAY=1 samples only the replay thread without call chains, and the profiler now follows the thread that replays instead of the one that started the back end.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:09:26 -05:00
tangerineturtle1
a154bafad2 Add a per-frame texture work log line and two ASTC upload changes, all off by default.
texup_log_ms logs a "texup:" line for each frame whose texture work on the render or replay thread
reaches that many milliseconds. The line splits the time into texture creation, staging, storage
copies, ASTC recording, scratch buffers and new device memory, to show where an area load's hitch goes.

astc_scratch_keep keeps the ASTC decoder's scratch buffer across upload batches instead of making a
new 64 MiB buffer for each batch. astc_arena stages GPU-decoded ASTC blocks in the staging arena
instead of a buffer per texture. Both aim at the allocation churn seen during area loads and stay off
until a play test measures them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:09:26 -05:00
tangerineturtle1
762bd3f934 Add audio underrun and late-update counters, and a knob for the priority of the game's audio thread.
NX2NAVI_AUDIO_STATS=1 logs output underruns, late passes of the audio render thread, waits for the renderer lock,
late audio updates from the game and voices that ran out of queued sound, each with the game frame, to find where
a crackle comes from. NX2NAVI_AUDIO_GAME_PRIO raises the thread that sends RequestUpdate while its update is read
(1) or also keeps it above normal (2). Both are off by default, so the audio path behaves as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:09:26 -05:00
chrg6
fe3cca739b Keep compiled pipelines as pipeline binaries under the runtime's own keys, and let the one-shot draw wait be set.
NVIDIA 621.01 reuses a pipeline-cache.bin entry only in the executable that wrote it, so every renamed or updated exe
compiled all of its pipelines again (23 s boots, 17 % read from a 470 MB file). With NX2NAVI_PIPE_BINARIES=1, where the
driver has VK_KHR_pipeline_binary, every pipeline, stage library and compute pipeline is looked up by its driver
pipeline key in pipeline-binaries.bin and made from the stored binaries; anything not stored is compiled once with its
data captured and appended. Each binary is stored once under its own key: nearly every graphics pipeline carries the
same 2 MiB binary, which made a first version of the file 7 GB. pipeline-cache.bin is not used while this is on. The
knob is off by default while it is being tested; NX2NAVI_PIPE_BINARIES_MAX_MB caps the file.

NX2NAVI_ONESHOT_WAIT_MS sets how long a draw into a target the previous frame did not render waits for a pipeline built
for the first time before it is skipped; the default keeps the old 30 s.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:09:26 -05:00
chrg6
9e56d5a316 Add keyboard and mouse button prompts, drawn from the art's keys.
The Button prompts row gains Keyboard and mouse (prompts = pc). tools/pad_prompts.py --style pc writes
romfs-patches-pc: every button glyph shows the first key its bindings give it (Ocarina's defaults, with the bind_
lines of the install's nx2navi.ini over them), the mouse buttons as a mouse, the d-pad and the left stick as their
keys laid out as on the keyboard (1 to 4, W A S D), and the camera as the mouse moving. The action prompt shows the
key's label, the ocarina's notes the light keys. A key the art has no picture of is written on a blank key. The pad
styles draw the same bytes as before.

The prompts description says so in each menu language, and the Chinese one no longer splits words across its lines.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:09:26 -05:00
tangerineturtle1
9e574f84ec Replace the enhanced HDR with a port of RenoDX's tone mapper.
The game's ACES tonemap shader gets a GLSL function linked into its SPIR-V where it clamps each channel: the game's SDR result upgraded to the HDR range by luminance and mapped to the display with the RenoDRT curve, exposure, highlights, shadows, contrast, saturation, highlight saturation, blowout, flare and hue correction. The settings reach it as four vec4 the support buffer gains at 1440. The present encode is a port of the swap chain pass: gamma correction, gamut compression, the peak clamp and PQ. Without an HDR10 swapchain the shader gives the game's own SDR picture; native HDR is unchanged.

The menu offers Off, RenoDX and Native, with gamma correction, the tone mapper and its grading rows. The shader build compiles sources marked "keep functions" without optimisation so their functions survive for the splice.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 06:06:33 -05:00
chrg6
b0d420db3d Land the shader and pipeline stutter pass, and the fixes it needed.
Large compute shaders that no cache holds are built on one background thread after the boot prebuild, smallest first, so their first dispatch no longer compiles them on the replay thread. NX2NAVI_BIG_BUILD_MAX_MB stops that builder once the process has grown by that much: on a 31 GB machine one of these shaders took the process up by 12.8 GB and the game stuttered while Windows paged. The builder takes the queue under its lock and copies each entry out before compiling it, so a shader queued meanwhile cannot free the arrays under it. The same change reports what pipeline-cache.bin gives back, and starts over when the file grows past NX2NAVI_PIPELINE_CACHE_MAX_MB.

A tensor-core program is now tested before its shader is asked for, in both dispatch paths. It runs the stand-in while NX2NAVI_NATIVE_TENSOR is off, and translating it anyway recorded four AI-upscaler shaders of 0.87 to 4.4 million SPIR-V words that this game never dispatches natively. Process memory went from 29.3 GB to 24 GB and the multi-gigabyte builds during play are gone.

The frame-time summary says which part a slow frame went to, and with NX2NAVI_REPLAY_TIME how the replay splits between draws, binds and transfers; NX2NAVI_SVC_SLOW_MS logs the kernel services that block, with the thread they blocked on. prof_report.py reads the map this build writes and adds the image base to a runtime Rip, so a profile resolves to function names instead of question marks.

build_xlate.py applies the patches with GIT_CEILING_DIRECTORIES set to the build folder's parent. Inside a checkout git read 0021-prmt-byte-permute.patch's paths from the repository's top, skipped every file of it and still exited 0, so PRMT was missing from locally built translators and every byte permute was a no-op. A Skipped patch line now fails the build. The note in AmpereLowering.cs that said the translator emits nothing for PRMT is corrected.
2026-11-09 03:34:46 -05:00
chrg6
1f7e9c975b Speed up the replay and fix what the perf pass found, and add a frame capture key for chasing rendering faults.
Performance: draws reuse the bindings that did not change and record only the dynamic states that differ from what
the command buffer holds; small uploads come from a staging arena; finished submissions are held briefly and handed to
the queue in batches; the recorder thread can keep a CPU core of its own; ASTC block-linear textures are deswizzled on
the GPU; dynamic resolution steps the upscaler mode to hold a frame-time target. Each has a setting in nx2navi.ini
(bind_reuse, dyn_delta, stg_arena, submit_batch, recorder_core, recorder_prio, astc_gpu_deswizzle, dyn_res) and the
staging cache now frees what it holds at shutdown.

Capture: NX2NAVI_DUMP=key saves the frame after each press of Insert, with mesh draws listed by task, mesh and fragment
shader, depth test and face culling, and mesh_prims.txt giving each mesh draw's primitive, clipping and fragment counts.
All of it is off unless NX2NAVI_DUMP is set.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 03:34:46 -05:00
chrg6
276325d9ff Add a PlayStation choice to the button layout.
pad_layout = playstation plays a pad by label as xbox does, named for a PlayStation pad: cross A, circle B, square X,
triangle Y. The prompts follow it like the Xbox layout, by label. Under Automatic the note says PlayStation for a pad
whose bottom button is labelled cross. The layout description in each menu language now says what every choice does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 03:34:46 -05:00
chrg6
612c02311d Add Xbox and PlayStation button prompts, drawn from button art on the player's machine.
The Controls tab has a Button prompts row again, with Nintendo, Xbox and PlayStation. prompts = playstation is a new
value next to xbox; nintendo, xbox and pc read as before, and pc stays out of the row as nothing makes its files for
this game. The game reads its prompts at start, so the row says when a restart would change them.

tools/pad_prompts.py writes the overlay folders romfs-patches-xbox, -xbox-label, -playstation and -playstation-label
from the player's RomFS and a folder of button art that stays outside the repository. The button font's glyphs become
outlines traced from the art, the action prompt's letters and the ocarina's note buttons are painted again in their
own BC4 and ASTC formats, and the font's entry in the resource size table grows with it. The by-position folders show
Switch A as B or circle, the by-label ones as A or cross, following the pad layout. The settings probe checks the new
value and folder names.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 03:34:46 -05:00
chrg6
3bb2ee71f9 Run guest shaders that use subgroup operations with maximal reconvergence when the driver supports it.
Guest code runs ballots and shuffles where the guest compiler had the warp reconverged, for example right after a loop
each lane leaves at a different iteration. Vulkan only promises that with VK_KHR_shader_maximal_reconvergence, so
the pipeline code adds the extension and the MaximallyReconvergesKHR mode to every module that declares subgroup
capabilities. vk_reconverge = 0 in nx2navi.ini turns it off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 03:34:46 -05:00
chrg6
a99234604b Give the keyboard defaults in nx2navi.ini.example as the code has them.
B is Left Ctrl and Backspace, and Left Shift is A (held, dash), but the example said B was Left Shift, so copying
its sample bind lines moved dash to B. Its walk_key example collided with that dash key, and it named a G key for
SHAKE, which has no default key.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:48 -05:00
chrg6
2f7e1806a2 Keep the audio renderer from going silent or hanging on edge values.
- An audio_prefill_ms of 180 or more asked for more queued audio than the renderer ever fills the ring to (half of
  it), so the output never started and stayed silent. The prefill is now held to that target; nx2navi.ini.example
  says so.
- An infinite or huge pitch or sample rate from the game kept the per-sample loops going for good under the
  renderer's lock, which then blocked the game's RequestUpdate. The step is held to 64 source samples per output
  sample.
- An endless loop buffer with no samples (start equal to end), which the voice keeps as the DSP does, made
  advance_voice go round for good; it now starves the voice as intended.
- A NaN sample or effect state reached the device, where it plays as full scale; it now plays as silence.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:48 -05:00
chrg6
1795b186a4 Say in nx2navi.ini.example how mods_dir and mods_order are read now.
A relative mods_dir is under the game's folder, the setup builds only the default folder's ExeFS patches and code
cheats, and the order is set in the file: the in-game menu it named has no Mods tab.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:48 -05:00
chrg6
a8f34e48c8 Offer a 1080p game resolution.
The picture's height can now be 1080, below the game's own 1440, for slower GPUs: the scene, the DLSS and FSR 3.1
modes and frame generation follow it, and the ultrawide shapes become 2560x1080 and 3840x1080. "Native" keeps its
floor of 1440. The example settings file now documents game_aspect and game_res.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:47 -05:00
chrg6
8daedbd806 Redraw the in-game menu with the game's own interface textures, and bring in the launcher's save import and faster builds.
In-game menu: the settings window, its tabs, rows, buttons and cursor, the performance overlay and the Preparing
shaders box are drawn with the game's interface textures where the RomFS holds them (runtime/ui/menu_skin.cpp,
perf_panel.cpp; plain shapes until they are decoded). Restart joins Continue and Quit, each behind a confirmation;
VSync is an on/off switch; DLSS is listed only on NVIDIA GPUs; the menu sounds are quieter; Picture shape is gone and
the setting descriptions are shorter; edge cases of input, layout and fonts are fixed. tools/menu_preview.py draws the
menu without the game.

Launcher: Import Saves takes a save from the game folder's saves/ folder or one the player picks; downloads fall back
to Windows' own certificate check when Python's refuses a server; updates are faster; the title bar is drawn in the
window and Navi is every icon. tools/make_game.py builds with CLANG64's clang where the launcher installed it, packs
the RomFS beside the lift and the compile, takes a prebuilt runtime, and compiles the game's resources without cmd.exe,
so a user folder with a space in its name builds.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 03:57:01 -05:00
chrg6
9bb3c6c55a Hand the frame limit to RivaTuner Statistics Server where it runs, and take it back when RTSS does not hold to it.
Where RTSS is installed and running, the frame limit from the menu goes into RTSS's profile for the game's executable
through RTSS's hooks library, loaded at run time, and the game's own pacer stands aside while RTSS has hooked the game.
Menu changes apply live, unlimited clears the limit, and closing the game (or any exit path) puts back what the profile
held, or removes a profile the game created. Each change is read back from the saved profile: without administrator
rights RTSS's profile folder cannot be written, and the game then keeps its own limiter. While RTSS limits, RTSS's own
frame counter for the game is checked against the limit; well past it for three seconds, the game takes the limiting
back for the run. The log says which limiter is in use and why, and a note under the frame-rate row says when RTSS
limits, when its profile is read-only, and when it does not hold the game to the limit. rtss = 0 and frame generation
keep RTSS out.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 01:25:12 -05:00
chrg6
cfc3228cc4 Build in the NX2navi Discord application's id
The Rich Presence now speaks for the Discord application registered as NX2navi by default, so the status reads
"Playing NX2navi" without an nx2navi.ini entry. The ini example shows the id as discord_app_id's default.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 01:25:12 -05:00
chrg6
8f559ac945 Show the Discord status under an NX2navi application instead of the old one
Discord takes the name above the presence from the application whose id the client sends, and the built-in id
belonged to the application the earlier framework registered for its own game, so the status read as that game.
The id and the art key now live in runtime/discord_app.h (NX2NAVI_DISCORD_APP_ID_DEFAULT and
NX2NAVI_DISCORD_IMAGE_DEFAULT), the one place to paste the NX2navi application's id. Until it is set there or in
nx2navi.ini, the presence stays off and logs once how to set it, and --probe-discord skips. The ini example and the
comments no longer claim the old id is registered as NX2navi, and the details-line example uses game 1.1.1.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 01:25:12 -05:00
chrg6
8702ddb356 Default to the Switch's own button positions on every gamepad, and fix menu edge cases.
pad_layout defaults to nintendo: Switch A on the right face button, B bottom, X top, Y left, on an Xbox pad too, where
auto had picked the Xbox layout. The settings probe checks every button's position.

Menu: the "default" mark follows the Steam Deck profile's values (cfg_default); Left on a value the list does not hold
goes to the last entry; the HDR row says "in use: off" when the swapchain is not HDR10; the open state is read again
after taking the reset, so a menu opened by F1 while the overlay alone was drawn starts with its focus row; the font
atlas is rebuilt only for a scale more than 12% off or one that held for half a second, so dragging the window's edge
no longer rebuilds it every frame.

A shader that fails to translate keeps its request and code in the shader cache. NX2NAVI_GPA_TWIN=0 turns the guest
copy of device address table stores off (diagnosis). The memcpy override no longer prints its first 500 calls.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 00:34:29 -05:00
chrg6
1b39aabd37 Describe what the code does in comments and docs.
Comments say what the code does and why, docs/maxwell.md keeps the Maxwell facts, and fetch_refs.sh clones only the checkout the build reads. Code is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:40 -05:00
chrg6
a1871280a3 Ocarina issue forms, and docs for the features this port has.
The issue forms ask for the version from the settings menu title and the log from logs\nx2navi.log. The guides and the sample settings cover the features this port has. The README lists the frame rate limits and widescreen and gets a Screenshots section for images attached on GitHub.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:40 -05:00
chrg6
c8738a948c Name the settings, files and tools NX2navi
The names are NX2NAVI, NX2navi or nx2navi: the settings prefix (NX2NAVI_*), the ini file
(nx2navi.ini), the shader translator (nx2navi_xlate), the Windows resources, the installer and the docs. The 8-byte
file magics keep their size (NX2NSANS, NX2NSPRG, NX2NSPRP, NX2NPKEY, NX2NRFS1), so caches and the RomFS index from
older builds are not read. cfg.c and the settings pages took the prefix length as 5; it now follows the prefix.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
Valiantsin Dzerakh
0478c13e45 Import the base tree (MIT, see LICENSE) 2026-11-07 05:04:38 -05:00