Commit Graph

14 Commits

Author SHA1 Message Date
chrg6
3bb2ee71f9 Run guest shaders that use subgroup operations with maximal reconvergence when the driver supports it.
Guest code runs ballots and shuffles where the guest compiler had the warp reconverged, for example right after a loop
each lane leaves at a different iteration. Vulkan only promises that with VK_KHR_shader_maximal_reconvergence, so
the pipeline code adds the extension and the MaximallyReconvergesKHR mode to every module that declares subgroup
capabilities. vk_reconverge = 0 in nx2navi.ini turns it off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 03:34:46 -05:00
chrg6
a99234604b Give the keyboard defaults in nx2navi.ini.example as the code has them.
B is Left Ctrl and Backspace, and Left Shift is A (held, dash), but the example said B was Left Shift, so copying
its sample bind lines moved dash to B. Its walk_key example collided with that dash key, and it named a G key for
SHAKE, which has no default key.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:48 -05:00
chrg6
2f7e1806a2 Keep the audio renderer from going silent or hanging on edge values.
- An audio_prefill_ms of 180 or more asked for more queued audio than the renderer ever fills the ring to (half of
  it), so the output never started and stayed silent. The prefill is now held to that target; nx2navi.ini.example
  says so.
- An infinite or huge pitch or sample rate from the game kept the per-sample loops going for good under the
  renderer's lock, which then blocked the game's RequestUpdate. The step is held to 64 source samples per output
  sample.
- An endless loop buffer with no samples (start equal to end), which the voice keeps as the DSP does, made
  advance_voice go round for good; it now starves the voice as intended.
- A NaN sample or effect state reached the device, where it plays as full scale; it now plays as silence.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:48 -05:00
chrg6
1795b186a4 Say in nx2navi.ini.example how mods_dir and mods_order are read now.
A relative mods_dir is under the game's folder, the setup builds only the default folder's ExeFS patches and code
cheats, and the order is set in the file: the in-game menu it named has no Mods tab.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:48 -05:00
chrg6
a8f34e48c8 Offer a 1080p game resolution.
The picture's height can now be 1080, below the game's own 1440, for slower GPUs: the scene, the DLSS and FSR 3.1
modes and frame generation follow it, and the ultrawide shapes become 2560x1080 and 3840x1080. "Native" keeps its
floor of 1440. The example settings file now documents game_aspect and game_res.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:47 -05:00
chrg6
8daedbd806 Redraw the in-game menu with the game's own interface textures, and bring in the launcher's save import and faster builds.
In-game menu: the settings window, its tabs, rows, buttons and cursor, the performance overlay and the Preparing
shaders box are drawn with the game's interface textures where the RomFS holds them (runtime/ui/menu_skin.cpp,
perf_panel.cpp; plain shapes until they are decoded). Restart joins Continue and Quit, each behind a confirmation;
VSync is an on/off switch; DLSS is listed only on NVIDIA GPUs; the menu sounds are quieter; Picture shape is gone and
the setting descriptions are shorter; edge cases of input, layout and fonts are fixed. tools/menu_preview.py draws the
menu without the game.

Launcher: Import Saves takes a save from the game folder's saves/ folder or one the player picks; downloads fall back
to Windows' own certificate check when Python's refuses a server; updates are faster; the title bar is drawn in the
window and Navi is every icon. tools/make_game.py builds with CLANG64's clang where the launcher installed it, packs
the RomFS beside the lift and the compile, takes a prebuilt runtime, and compiles the game's resources without cmd.exe,
so a user folder with a space in its name builds.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 03:57:01 -05:00
chrg6
9bb3c6c55a Hand the frame limit to RivaTuner Statistics Server where it runs, and take it back when RTSS does not hold to it.
Where RTSS is installed and running, the frame limit from the menu goes into RTSS's profile for the game's executable
through RTSS's hooks library, loaded at run time, and the game's own pacer stands aside while RTSS has hooked the game.
Menu changes apply live, unlimited clears the limit, and closing the game (or any exit path) puts back what the profile
held, or removes a profile the game created. Each change is read back from the saved profile: without administrator
rights RTSS's profile folder cannot be written, and the game then keeps its own limiter. While RTSS limits, RTSS's own
frame counter for the game is checked against the limit; well past it for three seconds, the game takes the limiting
back for the run. The log says which limiter is in use and why, and a note under the frame-rate row says when RTSS
limits, when its profile is read-only, and when it does not hold the game to the limit. rtss = 0 and frame generation
keep RTSS out.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 01:25:12 -05:00
chrg6
cfc3228cc4 Build in the NX2navi Discord application's id
The Rich Presence now speaks for the Discord application registered as NX2navi by default, so the status reads
"Playing NX2navi" without an nx2navi.ini entry. The ini example shows the id as discord_app_id's default.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 01:25:12 -05:00
chrg6
8f559ac945 Show the Discord status under an NX2navi application instead of the old one
Discord takes the name above the presence from the application whose id the client sends, and the built-in id
belonged to the application the earlier framework registered for its own game, so the status read as that game.
The id and the art key now live in runtime/discord_app.h (NX2NAVI_DISCORD_APP_ID_DEFAULT and
NX2NAVI_DISCORD_IMAGE_DEFAULT), the one place to paste the NX2navi application's id. Until it is set there or in
nx2navi.ini, the presence stays off and logs once how to set it, and --probe-discord skips. The ini example and the
comments no longer claim the old id is registered as NX2navi, and the details-line example uses game 1.1.1.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 01:25:12 -05:00
chrg6
8702ddb356 Default to the Switch's own button positions on every gamepad, and fix menu edge cases.
pad_layout defaults to nintendo: Switch A on the right face button, B bottom, X top, Y left, on an Xbox pad too, where
auto had picked the Xbox layout. The settings probe checks every button's position.

Menu: the "default" mark follows the Steam Deck profile's values (cfg_default); Left on a value the list does not hold
goes to the last entry; the HDR row says "in use: off" when the swapchain is not HDR10; the open state is read again
after taking the reset, so a menu opened by F1 while the overlay alone was drawn starts with its focus row; the font
atlas is rebuilt only for a scale more than 12% off or one that held for half a second, so dragging the window's edge
no longer rebuilds it every frame.

A shader that fails to translate keeps its request and code in the shader cache. NX2NAVI_GPA_TWIN=0 turns the guest
copy of device address table stores off (diagnosis). The memcpy override no longer prints its first 500 calls.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 00:34:29 -05:00
chrg6
1b39aabd37 Describe what the code does in comments and docs.
Comments say what the code does and why, docs/maxwell.md keeps the Maxwell facts, and fetch_refs.sh clones only the checkout the build reads. Code is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:40 -05:00
chrg6
a1871280a3 Ocarina issue forms, and docs for the features this port has.
The issue forms ask for the version from the settings menu title and the log from logs\nx2navi.log. The guides and the sample settings cover the features this port has. The README lists the frame rate limits and widescreen and gets a Screenshots section for images attached on GitHub.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:40 -05:00
chrg6
c8738a948c Name the settings, files and tools NX2navi
The names are NX2NAVI, NX2navi or nx2navi: the settings prefix (NX2NAVI_*), the ini file
(nx2navi.ini), the shader translator (nx2navi_xlate), the Windows resources, the installer and the docs. The 8-byte
file magics keep their size (NX2NSANS, NX2NSPRG, NX2NSPRP, NX2NPKEY, NX2NRFS1), so caches and the RomFS index from
older builds are not read. cfg.c and the settings pages took the prefix length as 5; it now follows the prefix.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
Valiantsin Dzerakh
0478c13e45 Import the base tree (MIT, see LICENSE) 2026-11-07 05:04:38 -05:00