- The mesh stage's storage table starts 0x90 bytes before the end of the 2 KiB constant bank, and all sixteen slots
were written: 0x6C bytes past a stack buffer on every mesh draw. It holds the nine slots that fit.
- The prebuilt runtime is compiled without AVX, so its preemption stub saved only XMM0-15 while the lifted code of
an AVX2 processor keeps data in the upper YMM halves, which the stub's callees may clear. Both bodies are built
now and the one for the processor is chosen at the start.
- After an FSR 3.1 frame generation error the window's swapchain was still AMD's object but went to the plain Vulkan
calls. Swapchain calls follow whose swapchain it is, and a failure takes it down as a switch in the menu does.
- A movie is paced at its own 60 fps under a lower limit too: at 40 fps it ended 25 s behind its sound.
- A lost device left the wait for an upload spinning for good; it ends the run with the device's report.
- The compute pipeline key had four bytes of padding that were hashed and compared, so a prebuilt pipeline could be
missed and built again.
- A thread's TLS pointer was published before the TLS was allocated, so the slot was always 0.
- A fatal exit puts RivaTuner Statistics Server's profile back, and an ini saved as UTF-16 is read.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
framegen_multiplier (2, 3 or 4, live) sets how many frames the display gets per rendered frame while NVIDIA DLSS frame generation runs, and a DLSS multiplier row under Frame generation in the Screen tab sets it. nx2navi_dlssg.dll now passes that count to Streamline and reports the GPU's limit (numFramesToGenerateMax) through a new optional export, nx2sl_frames_max; with an older DLL the game keeps to 2x. A value above the limit is clamped to it with a log line, and the menu lists only what the GPU and driver allow, with a note saying why the rest are missing. The Frame generation row now says "in use: off" and why when DLSS frame generation was set but does not run.
The pacer divides the frame limit by the multiplier in effect, as it already halved it for FSR 3.1, so the display gets the limit and VSync at the display's rate drops no generated frames; RivaTuner Statistics Server stays out while DLSS frame generation runs, since it counts generated frames. With DLSS 2x a limit of 60 now shows 60 on screen instead of 120.
nx2navi_dlssg.dll has to be rebuilt (tools/build_dlssg.py) for 3x and 4x.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The draw path called getenv("NX2NAVI_SKIP_PROG") for each of ~2,000 draws a frame, and getenv walks the whole environment block: in a replay-thread profile it was a sixth of the samples. That switch, the polygon offset log and the ASTC alpha probe now read the environment once. The replay's cost per draw went from 3.7-5.0 us to 1.2-2.8 us in play, and the mean frame rate by minute from 60-131 fps to 103-243 fps (different places in each run, so the figures are approximate).
cfg_get and cfg_value keep each thread's answers per name until the settings version changes (cfg_set, cfg_reset, cfg_load, and cfg_setenv, which the code that sets NX2NAVI_ variables in the process's own environment now uses); NX2NAVI_CFG_MEMO=0 asks every time.
The texture pool creates at most pool_create_budget (NX2NAVI_POOL_CREATE_BUDGET, default 16, was a fixed 64) new texture entries per refresh. The refresh holds the texture lock throughout, and streaming new textures in made 20-40 ms frames; at 16 the lock was held 5 ms per slow frame instead of 24 in a dense area, and the frames over 25 ms in a heavy minute fell from 111-188 to 89, with no pop-in seen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
pad_layout = playstation plays a pad by label as xbox does, named for a PlayStation pad: cross A, circle B, square X,
triangle Y. The prompts follow it like the Xbox layout, by label. Under Automatic the note says PlayStation for a pad
whose bottom button is labelled cross. The layout description in each menu language now says what every choice does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Controls tab has a Button prompts row again, with Nintendo, Xbox and PlayStation. prompts = playstation is a new
value next to xbox; nintendo, xbox and pc read as before, and pc stays out of the row as nothing makes its files for
this game. The game reads its prompts at start, so the row says when a restart would change them.
tools/pad_prompts.py writes the overlay folders romfs-patches-xbox, -xbox-label, -playstation and -playstation-label
from the player's RomFS and a folder of button art that stays outside the repository. The button font's glyphs become
outlines traced from the art, the action prompt's letters and the ocarina's note buttons are painted again in their
own BC4 and ASTC formats, and the font's entry in the resource size table grows with it. The by-position folders show
Switch A as B or circle, the by-label ones as A or cross, following the pad layout. The settings probe checks the new
value and folder names.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
cfg_load trims blanks around a value and takes one pair of quotes off it, so a mods_order list whose first mod's
folder name starts with a space, or a value that is itself quoted, came back different at the next start and the mod
lost its place and switch. Such values are now written in quotes; others are written as before. --probe-cfg checks it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
pad_layout defaults to nintendo: Switch A on the right face button, B bottom, X top, Y left, on an Xbox pad too, where
auto had picked the Xbox layout. The settings probe checks every button's position.
Menu: the "default" mark follows the Steam Deck profile's values (cfg_default); Left on a value the list does not hold
goes to the last entry; the HDR row says "in use: off" when the swapchain is not HDR10; the open state is read again
after taking the reset, so a menu opened by F1 while the overlay alone was drawn starts with its focus row; the font
atlas is rebuilt only for a scale more than 12% off or one that held for half a second, so dragging the window's edge
no longer rebuilds it every frame.
A shader that fails to translate keeps its request and code in the shader cache. NX2NAVI_GPA_TWIN=0 turns the guest
copy of device address table stores off (diagnosis). The memcpy override no longer prints its first 500 calls.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Screen tab hides Game resolution when the build has no output and scene patch sets, and the resolution code no
longer grows the memory pool for it. FSR sharpness now also runs when the game image is shrunk to the window, which is
always the case for Ocarina's 2560x1440 picture at 1920x1080, and the overlay drops NX2navi's fixed 3D scene size. A colour
profile set in nx2navi.ini now applies without the menu. The Game tab hides the frame limit in builds without frame-rate
patch sets and lists the game languages the RomFS ships, adding Polish and Brazilian Portuguese. 5.1 sound is reported to
the game's virtual output device. The remap page describes each button as Ocarina's controls screen does, gives each
D-pad direction its own description and drops NX2navi's shake row; the keyboard defaults follow Ocarina (Shift dashes on A,
Ctrl puts away on B, O and N for the ocarina and Navi, middle mouse resets the camera). docs/controls.md is updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>