Commit Graph

10 Commits

Author SHA1 Message Date
chrg6
bd7d140a54 Draw lines as wide as the game sets them.
The game's line width was dropped at the call and every line drawn 1 pixel wide; the game draws two lines a frame at 4.5 pixels into a 144x144 mask. The width is now recorded with the draw state and set as dynamic state for draws of the line topology class, held to the device's range. Only pipelines of that class list the new dynamic state, so the others keep their entries in the pipeline caches and the driver's. line_width = 0 draws every line 1 pixel wide as before.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:09:36 -05:00
chrg6
ded13958de Log the sizes of the caches, pools and tables under the perf trace, every 600 presents and with each memory snapshot.
Four "mem: sizes" lines give the entries and bytes of what no other line counted: the guest heap, physical maps, kernel region, lazily written ranges and the fixed kernel, setjmp, save-file, RomFS and zstd tables; pool records, mirrors, deferred destructions, upload and staging buffers, the device address table and the texture, sampler and slot caches; image views, descriptor spares, the completion queue, uniform snapshot arenas, recording copies and pins; and pipelines, layouts, stage libraries, job queues, the shader memory cache and the translator processes. Each subsystem reads its own counters under its lock; settings now count the replaced values they keep. Segment and scene lines say "-" for the world clock before it starts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 19:51:36 -05:00
chrg6
745d48bc8c Free released recording copies outside their lock, skip the yield's lock and scans when nobody waits for a core, and wait instead of spinning before a paced frame.
Found by profiling a play session and reading the kernel and the command recording:
- nvn_api_cmd.c: a released recording copy had its pins uncounted (a walk over every op) and was freed while copy_lock was held exclusively; the main-loop thread waited for that lock 2.8% of its time. The copies are now chained under the lock and freed after it. The walks over a recording's records test a mask of the five op kinds that name pins before calling op_pins.
- kernel.c: SleepThread(0) took the kernel lock and computed the caller's inherited priority, a scan over every blocked thread, also when no thread waited for a core, which is nearly always. It now yields at once then. A wait without a timeout no longer reads the clock.
- nvn_api_obj.c sleep_until: the wait for a paced frame's slot slept coarsely and left the last 1 to 2 ms to a yield loop; the high-resolution wait now takes all but its own margin.
- input.c: the keyboard scan (a system call per key) is reused for reads within a millisecond.
- nvn_api_core.c: the read-lock observer's commit-point address is 1.2.1's and is now only compared there.
- kernel_probe.c: the probe expected three virtual cores and wait type 3 to be refused; the kernel has six cores and implements the 64-bit wait. It now checks both as they are, counts a core number past the cores as a clash without unbalancing core 0, and --probe-kernel passes again.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit a3dbd63878d7d6de096ceb4c25988192b4bce738)
2026-11-09 20:48:10 -05:00
tangerineturtle1
589c9e8654 Stop the replay from searching the environment on every draw, remember setting lookups, and spread texture streaming over more frames.
The draw path called getenv("NX2NAVI_SKIP_PROG") for each of ~2,000 draws a frame, and getenv walks the whole environment block: in a replay-thread profile it was a sixth of the samples. That switch, the polygon offset log and the ASTC alpha probe now read the environment once. The replay's cost per draw went from 3.7-5.0 us to 1.2-2.8 us in play, and the mean frame rate by minute from 60-131 fps to 103-243 fps (different places in each run, so the figures are approximate).

cfg_get and cfg_value keep each thread's answers per name until the settings version changes (cfg_set, cfg_reset, cfg_load, and cfg_setenv, which the code that sets NX2NAVI_ variables in the process's own environment now uses); NX2NAVI_CFG_MEMO=0 asks every time.

The texture pool creates at most pool_create_budget (NX2NAVI_POOL_CREATE_BUDGET, default 16, was a fixed 64) new texture entries per refresh. The refresh holds the texture lock throughout, and streaming new textures in made 20-40 ms frames; at 16 the lock was held 5 ms per slow frame instead of 24 in a dense area, and the frames over 25 ms in a heavy minute fell from 111-188 to 89, with no pop-in seen.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:09:26 -05:00
chrg6
1f7e9c975b Speed up the replay and fix what the perf pass found, and add a frame capture key for chasing rendering faults.
Performance: draws reuse the bindings that did not change and record only the dynamic states that differ from what
the command buffer holds; small uploads come from a staging arena; finished submissions are held briefly and handed to
the queue in batches; the recorder thread can keep a CPU core of its own; ASTC block-linear textures are deswizzled on
the GPU; dynamic resolution steps the upscaler mode to hold a frame-time target. Each has a setting in nx2navi.ini
(bind_reuse, dyn_delta, stg_arena, submit_batch, recorder_core, recorder_prio, astc_gpu_deswizzle, dyn_res) and the
staging cache now frees what it holds at shutdown.

Capture: NX2NAVI_DUMP=key saves the frame after each press of Insert, with mesh draws listed by task, mesh and fragment
shader, depth test and face culling, and mesh_prims.txt giving each mesh draw's primitive, clipping and fragment counts.
All of it is off unless NX2NAVI_DUMP is set.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 03:34:46 -05:00
chrg6
9a8f74fe53 Refresh read-back ranges in the VRAM mirror, guard the boot pipeline prebuild against driver crashes and count out-of-order event waits.
Small ranges the game invalidates and reads back (the exposure meter) are copied from guest memory into the mirror at every submission that uses their pool, so a CPU write made between recording and the GPU's run is not lost; NX2NAVI_READBACK_SYNC=0 turns it off.

While the boot builds the recorded pipelines a marker file exists next to the pipeline cache. A start that finds it left over records the GPU and driver in pipeline-prewarm-skip.txt, and starts on them build those pipelines at their first draw instead.

CommandBufferWaitEvent is now recorded as OP_WAIT_EVENT. The replay waits for nothing but counts the waits it reaches before their signal, and how many submissions later that signal comes, in the NX2NAVI_TRACE=gfx frame line.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:47 -05:00
chrg6
99de7b943f Give each file of copied code one license line.
Each file that contains copied code names its copyright holder and license and points at THIRD_PARTY_NOTICES.md; zlib code keeps its full notice and the mark that it was altered. Comments and probe text only.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:40 -05:00
chrg6
1b39aabd37 Describe what the code does in comments and docs.
Comments say what the code does and why, docs/maxwell.md keeps the Maxwell facts, and fetch_refs.sh clones only the checkout the build reads. Code is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:40 -05:00
chrg6
77d0c0b84e Port Ocarina of Time (Switch 2) to the recomp host
The NVN2 front end and the SM86 to Maxwell shader lowering (tools/xlate/AmpereLowering.cs, mesh and task stages,
bindless texture pools, BRX jump tables, the NVN2 compute c0 layout) with four translator patches (0017-0020) bring the
opening of the game to 58-60 fps on the Vulkan renderer.

This round fixes the haze: SM86 IPA is lowered as a plain Maxwell IPA.PASS (texture coordinates were corrected for
perspective twice); LDSM, TXD, both F2IP byte forms, HMMA, MOVM and HFMA2.RELU are lowered and spill mode has eight
uniform register groups; conditional rendering keeps the newest counter report per address and treats a report as
pending until its value is in guest memory, so occlusion tests and the depth clears around the depth copy behave; and
the upscaler stand-in decodes the post pass's sRGB picture before writing the linear target. Tensor-core programs keep
the stand-in unless NX2NAVI_NATIVE_TENSOR=1, because their lowering does not match the hardware yet.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
Valiantsin Dzerakh
0478c13e45 Import the base tree (MIT, see LICENSE) 2026-11-07 05:04:38 -05:00