Commit Graph

229 Commits

Author SHA1 Message Date
chrg6
d64a9b689c Move the sprint button's stance host off the water ripples' patch page slot, and fix how presses and timings reach it.
The stance site called page +0xf50, which the 0.10.0 line gives the water ripples above 60 fps: the second
registration ends every 1.1.1 start with "registered twice", the sprint button off included. It calls +0xf30 now, and
the comments say which slots the other sets hold. The set's switch is NX2NAVI_SPRINT_BUTTON_PATCH, not a name another
open request uses for a set of its own.

The stand-still timings count 60 Hz frames (frame_step_frames), so a toggled sprint no longer ends on a short stop at
high frame rates. A press is decided at its start for its whole length: kept from the game and the sprint's when it
begins in gameplay (B: while Link moves), else the game's alone, so a held B is not handed to the game half way and a
B that closes the pause menu starts no sprint. A sprint switched off with the button setting does not come back by
itself, Link's state is read only where the memory is readable, and the row, nx2navi.ini.example and the controls
page say that B is the jump under the game's Swap Jump Controls and name the button without assuming the layout.
tests\sprint_check.py covers the press latch, the menu press, 240 fps and the switch-off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 22:57:56 -05:00
kendo
aab082ff51 Say that the sprint button's B puts the weapon away when Link is not moving, not that it attacks. 2026-11-12 22:55:14 -05:00
kendo
54fa3bc0c7 Offer only L3 and the game's B button as sprint buttons, and name B as the Nintendo layout's bottom button. 2026-11-12 22:55:14 -05:00
kendo
6faf4bd7f5 Add a sprint button: a setting that makes Link sprint without rolling first, as a toggle or while held. 2026-11-12 22:54:58 -05:00
Leyukaka
fe5bff8328 Keep the pipeline cache files under their limit when writing them, and set the limit from the RAM.
The limit was only checked when a file was read, all or nothing, so a run could write a file the next start then
dropped whole. On an RTX 5080 (0.9.2) pipeline-cache-play.bin reached 524.9 MB in one session and the next start began
empty; pipeline-cache.bin grows 14-28 MB at each fold and crosses 512 MB within a few sessions. Now a fold is made only
when its result fits, and a cache past the limit is not saved again, so the file keeps its last save under the limit.
Unset, the limit is the RAM / 32 between 512 and 4096 MB (512 on 16 GB as before, 2048 on 64 GB), which on that PC
took boot hits from 14 to 84 % and left no pipeline to background builds.

Taken into the 0.10.0 line with its conflicts resolved: the line had raised the limit to 1024 MB and says why in
the comment above cache_data_read, in nx2navi.ini.example and in AUDIT.md; those texts keep that reason and give the
RAM-based default, whose floor the next commit raises to match.
2026-11-12 22:50:53 -05:00
chrg6
70c9935789 Give the movie timestamp sites a switch of their own, say what changes in a decoder stall, and keep the movie cap's reasons.
The two sites that count a movie's event frames from the shown picture's timestamp were part of the real-time step's
set, so the only way back to the old count also turned the step off. They are set omovie now, NX2NAVI_MOVIE_PTS
(movie_pts in nx2navi.ini), on by default.

The comment says what the new count changes at the default movie cap: nothing while the decoder keeps up; in a stall
the cues wait with the picture instead of going on with the soundtrack, and step by 2 or more when a picture is
dropped. The counter's reader, main+0x3b3ec10, hands it out as a float frame through a virtual call; its callers were
not traced, so whether a cue on a dropped picture's tick can be missed is said to be unknown, which is what the
switch is for.

The movie cap's comment keeps the measurements it rests on, the narration 2.4 times early and the fade at 65 s of 154
at 144 fps, with one sentence on the new sites. The new test is described in prose with what it does not cover,
instead of a row in the lifter's table.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 22:49:19 -05:00
chrg6
ec9dd522b1 Add texture compaction behind NX2NAVI_TEX_COMPACT, off by default.
With the setting on, textures no shader sampled for ten seconds are copied on the GPU out of the emptiest allocator
blocks into the holes of fuller ones, so the emptied blocks go back to the driver. A pass starts when the free space
inside the device-local blocks reaches NX2NAVI_TEX_COMPACT_MIN_MB (one block under VRAM pressure) and the block
table has blocks that hold nothing but such textures, with room elsewhere for what moves. It takes at most four
textures and NX2NAVI_TEX_COMPACT_FRAME_MB a frame, and none in a frame that loads an area, already made or uploaded
textures, or follows a long one. A released texture the size cap would drop is dropped instead of moved.

Only a texture whose image holds what the game's memory holds moves: uploaded, never written by the GPU, single
sampled, not depth. The entry takes the new image under the texture lock and its address generation moves, so every
slot, pool descriptor and memo resolves again. The old image and its views stay until the texture pool has taken
every set of its ring and the GPU is past the submissions recorded until then, as a retired texture's do.

Each pass logs what it moved and dropped, the blocks and bytes given back, and the time it took. A block emptied of
textures that the allocator keeps is left alone for ten minutes, and a pass that gave nothing back doubles the wait.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:33:29 -05:00
chrg6
f2a5800c1e Merge the stability pass's fixes for the points its review found.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>

# Conflicts:
#	runtime/cfg.c
2026-11-12 22:32:48 -05:00
chrg6
17aee6ea73 Link mesh pipelines from stage libraries like the vertex pipelines.
A mesh pipeline (task and mesh stages: the foliage, the grass, the terrain) had no stage libraries. Each new one was
a whole build, 0.2 to 1.1 s the first time foliage of a kind appeared, and its draws waited or were left out of the
picture until it was done.

Where the graphics pipeline library is on, a mesh pipeline is now linked at its first use from three libraries and
its whole build follows behind, as for a vertex pipeline. Its pre-rasterization library holds the task and mesh
stages and is keyed by both shaders. No vertex input library is linked: a mesh pipeline has no such state. Its layout
is a stage-independent pair, the mesh and task stages' bindings in set 0 and the fragment stage's in set 1, so the
fragment shader library can be the one a vertex pipeline uses. That library's key now also carries what a mesh
pipeline's fragment module gets filled in and whether the shading rate is dynamic state, which the pre-rasterization
and the fragment shader state both hold. The fragment output library is shared as it is.

The fast link on the library workers, the wait of a draw for its libraries and the pipeline hints take mesh pipelines
in. The summary counts them by themselves: fast links and their time, how long the ones a draw missed took to become
usable, and the libraries made for them.

NX2NAVI_GPL_MESH=0 (gpl_mesh in nx2navi.ini) keeps the whole build. It is also kept without the pipeline library, on
a device that draws no mesh pipeline, and where mesh pipelines alone are built without the driver's optimiser; the
start logs which is in use and why. The mesh emulation of the low-end GPU mode is not touched.

A mesh pipeline with libraries is another pipeline to the driver than the one built before, so an install's recorded
mesh pipelines are compiled once more at the first start with this change.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:31:11 -05:00
chrg6
9100509b00 Enable the drivers' low-latency extensions only in a run that starts with the setting on.
With the setting off the device is made exactly as before the mode existed, so the mode cannot change anything for a player who never turns it on. Turning it on in the menu then takes a restart, and the row says so; in a run that started with it on, changes still apply at once.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:30:56 -05:00
chrg6
2f30f1a2e5 Add the low latency setting and the module that drives the drivers' own modes.
NX2NAVI_LOW_LATENCY (0 off, 1 on, 2 on with boost; live) is for low latency without frame generation: NVIDIA's mode
through VK_NV_low_latency2 and AMD's through VK_AMD_anti_lag, each enabled on the device only where the driver lists
it, NVIDIA's with VK_KHR_present_id, which it needs, and AMD's with its feature. A device made by the DLSS Frame
Generation proxies gets neither: that path keeps its own low latency. vk_lowlat.c holds the calls, the frame numbering
and the statistics line; nothing calls into it yet beyond the start and the end of the device.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:29:59 -05:00
chrg6
d9bc002d9a Play the game's own amplitude at the default vibration strength on the HD rumble path.
The default strength is 130 to make up for what two motors lose. A linear actuator that takes the game's value needs none of that, and 1.3 times the amplitude clipped the strongest pulses at the safe maximum. The HD path now divides by the default, so the setting scales from the game's own amplitude.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:29:04 -05:00
chrg6
df8431da7b Send the game's vibration values as they are to a Switch Pro Controller or Joy-Con, behind rumble_hd.
With NX2NAVI_RUMBLE_HD=1 (live, off by default) the gamepad the game reads, when it is a Switch Pro Controller, a
single Joy-Con or a pair of them, gets each side's low and high band with its own frequency and amplitude in the
controller's rumble report, and no dual-motor call any more. A Pro Controller and a single Joy-Con take the report
through SDL's effect call, over USB and Bluetooth; SDL refuses that call for a combined pair, so a pair's reports are
written to its two HID devices directly. Every other gamepad, the Switch 2 controllers included, keeps the motors.

The game's thread posts its newest values and a thread of input.c writes the reports: at most one every 15 ms
(rumble_hd_ms), a held value again every 30 ms, and the neutral value when the game stops sending for 250 ms, when
another gamepad takes over, when the setting is turned off and before the process ends. The rumble strength scales the
amplitude and rumble = 0 silences this path as well. With the setting off nothing is written to the controller: the
log line at the take names it by its ids, and the first report is the trial.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:28:36 -05:00
chrg6
96d656ba1d Time the staging allocation's wait for an upload batch, and say what the batch limit and the staging pool do now.
A staging buffer that does not fit the staging pool's blocks waits for the oldest upload batch with the upload lock
held, and a replay submission that sends its uploads waits for that lock. The wait cannot leave the lock: the caller
holds the open batch's command buffer and the buffer it asks for belongs to that batch. What the wait costs on an area
load was not measured anywhere, so it is timed and logged now: the first four waits, then at every doubling of their
count, with the total and the longest.

Since staging stays inside the pool's blocks every batch is submitted at 64 MiB of staging, so upload_batch_mb = 0 is
that limit and not "no limit", and the values above it (the low-end mode's 256, the menu's 128 to 1024) change
nothing; a discrete card keeps 256 MiB of staging for the run, not 128. The settings table, the menu's text,
nx2navi.ini.example, the audit's table and the comments say so.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:27:25 -05:00
chrg6
4a6ba66115 Tell a start that was closed or stopped during the boot's builds from a driver crash, and limit the whole warm.
A marker or a journal left by a start that died in the boot's builds was always read as a driver crash. Since the
whole warm those builds run for minutes, so a start ended from outside in that time (the task manager, a program that
stops the game, the power) switched the pipeline prebuild off for that driver for good, or put up to 32 variants on
the skip list that the driver had merely been building. Closing the window was already an orderly end and still is.

The crash handler now leaves a note while the boot's builds run. With the note the next start does what it did: it
skips the prebuild, or the variants the journal names. Without it the end is taken for a stopped start: the pipelines
are built again and the journal's variants are blamed on nothing. Three such ends in a row still skip the prebuild,
for a driver that ends the process without a fault the handler sees. The boot's journal has a file of its own, so the
preparation's keeps its meaning.

The whole warm waits prewarm_full_s seconds at most (600): when they are up the game starts, the builders step down
to the background's thread counts and priority, and the file says "done", so the boot screen has one turn per driver.

tests\boot_warm_check.py covers what a leftover marker means with and without the note.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:24:22 -05:00
chrg6
7ff1a21ef2 Grow the render-target heap for the scene's share only where the start's mode needs it, and never past the pool.
The heap grew by the full-picture factor whenever the upscaler setting was on, in every mode, and without a limit:
915 MiB at 3840x2160 where the modes below three quarters need 382, and at 10240x2880 an application pool of 13.5 GiB,
past the 12 GiB heap region, where the game's SetHeapSize is refused and nothing starts.

The share is now the start's own mode: all of the picture for dlaa, the game's own most for the modes below it. The
growth stops at what the pool can take (2,478 MiB): the scene's share is lowered to what fits, with a log line, and a
picture too large even for the game's own scene gets the most there is and a warning. A mode chosen in the menu that
renders more than the start's keeps the start's share until a restart, as the log and nx2navi.ini.example now say.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:08:44 -05:00
chrg6
264dbe42cc Merge the stability and memory pass into the 0.10.0 line.
Conflicts: the settings key lists and section maps take both sides' entries.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 21:49:17 -05:00
chrg6
1f5ee67f7e Give every skinned character motion vectors of its own, not the player alone.
A scene draw whose vertex shader reads a matrix palette and whose vertex layout feeds its joint inputs unsigned integers is drawn a second time into the motion vectors with last frame's blocks and camera, as the player's meshes are, with the same depth test and the same guard for bones that turn sharply. Which draw of last frame it continues is decided when the vectors are made, so the replay's threads cannot change it; a draw in doubt keeps the camera's motion. The player's own draws stay with their ownership records.

skin_motion (NX2NAVI_SKIN_MOTION) is 1 by default and 0 turns it off. The motion status line now counts the skinned draws seen, those drawn with their own motion and the others by reason. It has compiled and passed its checks; it has not been played.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 20:03:59 -05:00
chrg6
cd0b1a387d Do the whole warm on the boot screen at the first start after a driver change.
A start that finds the pipeline cache written by another device or driver has nothing built, and everything was
compiled beside the game: an 8-core integrated GPU drew fewer than 600 frames in its first 11 minutes. Such a start
now waits on the "Preparing shaders" screen, with counts, for every recorded pipeline, for the compute pipelines on
every core at normal priority, and, when a sample says the driver's own cache lacks the prepared stage libraries, for
all of them on every core. The memory gate still holds for the builds, and the library builds write the preparation's
journal while the start waits, so a variant the driver's compiler dies on is skipped from the next start on.

boot-warm-owed.txt beside the caches names the GPU and driver: a start closed during the warm is followed by one that
goes on with it, three at most, and "done" keeps later starts ordinary while the cache file still carries the earlier
driver's header. When the boot stops waiting (prewarm_wait_ms, or a minute without progress) the builders step down
to the background's thread counts and idle priority. prewarm_full = 0 turns the warm off.

With nothing in the driver's cache the probe took 425 s on an RTX 5090 with 16 CPU threads: 87 s for 5,775 recorded
pipelines, 19 s for 4,075 compute pipelines and 317 s for 42,231 prepared variants.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 20:03:12 -05:00
chrg6
97c3bac3bd Keep a small buffer clear and the counter reports of the same record in the order of the stream.
A ClearBuffer or ReportValue is a fill the GPU makes where it stands in the stream, and guest memory has its bytes once the GPU got there. A counter report reaches guest memory as a CPU write after its submission's fence, and a render condition reads the record when it is replayed. So a report followed by a clear of the same record ended as the report (in one submission always, across two when the completion thread was behind the GPU), and a condition replayed after the clear read what memory held before the fill, or the 0 of the report the clear had overwritten.

A clear of at most 256 bytes into CPU-visible memory is now also applied at its place in the replay to the records it covers that a counter report went into: the covered bytes get the value in guest memory at once, reports replayed before the clear leave those bytes alone when their write comes, a condition reads them from memory, and a report replayed after the clear writes the whole record as before. The GPU's fill is recorded as before. Other small clears stay the GPU's fill alone: the GPU reads guest memory too, at once in an imported pool and through the next upload of the written page in a mirrored one, so a write ahead of it into a draw count or an atomic counter would reach passes that still want the old value. NX2NAVI_CLEAR_SMALL_CPU=0 turns it off.

Whether the game clears counter records is not known. The pass timing captures of 75 scripted runs show one buffer fill a frame and nothing else about it, and the frame dump does not list buffer fills. The periodic vk_usnap line now counts the small clears, the last one's size, value and address, how many covered a record with a report, the reports into bytes cleared before, and the report writes that left cleared bytes alone.

Checked with a build of the dev exe, the launcher tests, the device address table check, and a scratch link of vk_exec_xfer.c against stubs that replays reports and clears in both orders. Not run in the game.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 19:49:40 -05:00
chrg6
433cc62cce Leave the shared DLSS feature off until it has run on a card.
It was compiled and linked only, and in this game the dynamic resolution's steps may never change the scene's render size, so it has nothing to gain by default yet. dlss_range = 1 turns it on.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 19:43:57 -05:00
chrg6
8273d881a4 Run the smaller render sizes of a DLSS mode on that mode's feature, with the history kept.
Each render size had a DLSS feature of its own, so a step of dynamic resolution or a screen at another share cost a
feature creation and a new history. The feature created at the render size of the DLSS mode set now also takes every
smaller render size that DLSS reports for its output size and quality value (the optimal settings callback's dynamic
minimum), as the sub-rectangle of that frame's own images. A size above the feature's own, below the minimum, of
another shape or output size, or met under another mode still gets its own feature, and a refused evaluation turns the
sharing off for the run. The first frame of another size is still left out of the per-object motion pass and still
starts frame generation anew.

The setting is dlss_range (NX2NAVI_DLSS_RANGE), 1 by default: a run whose render size never changes creates and
evaluates its feature with the parameters it had, and adds one query after the creation. The log says for each feature
which render sizes it takes, and the status line counts the changes of size that kept the history against those that
made a feature. Compiled and linked only; no evaluation of a shared feature has run on a GPU.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 19:43:49 -05:00
chrg6
bc256496cb Build task and mesh shader pipelines without the driver's optimiser on AMD's driver for RDNA 1 and 2, unless vk_noopt says otherwise.
That driver loses the device in play ("No fault detected", a timeout) on RX 6600 to RX 6950 XT cards in every version from 0.6.0 to 0.9.2, with the pipeline library on or off and the lazy write-back on or off (#591, #602, #659, #683, #684, #689, #635, #719, #279, and fourteen of twenty sessions in a player's launcher log of an RX 6800). Where the pass marks name a pass the GPU was in, twelve logs of five reporters, its first draw is a mesh pipeline: mesh shader ba4302f1 with fragment shader f64a96dd in nine, the one-draw pass of 1bbdb17e with 6cc3a476 in three. The five logs of 0.9.1 and 0.9.2 stop between the compute dispatch before such a pass and the pass. vk_noopt = mesh was there as a test switch for this suspicion and no reporter had run with it.

It is now what an unset vk_noopt means on that driver branch; every other driver keeps 0, and vk_noopt = 0 gives the optimised pipelines back. The picture is the same; the mesh and task shaders run slower, by how much is not measured, and those pipelines are built once more because the flag is part of the driver's cache key. That the optimiser is the cause is not shown: no AMD card ran this.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:31:56 -05:00
chrg6
641c866e8a Catch up after a stall of the audio renderer by rendering the owed frames without queueing them.
A frame that was not rendered when it was due stayed lost: the timer set its
deadline to now once it was more than 100 ms late, and the device-paced path
only filled the ring to its target again, so after every gap the sound was
heard that much later than the picture it belongs to.

Frames that are owed are now rendered and dropped: mixed in full, so the
voices, the effects and the sinks the game reads back advance, and not queued
for the device, whose queue is filled to the same target afterwards. While the
device paces, what is owed is the silence it played for want of frames,
counted in its own samples from an underrun until the prefill is queued again;
the wait for the first prefill and anything owed across a stop do not count.
On the timer a frame is owed when its deadline passed a whole frame ago. A gap
of more than 3 seconds is not caught up: the sound goes on from now.

NX2NAVI_AUDIO_CATCHUP=0 turns it off and keeps the old timing. The audio
statistics line counts the catch-up frames and the gaps that were too long,
and tests/audio_mixer_check.py checks the device's side of the accounting.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:17:48 -05:00
chrg6
42d16e7f0b Ramp a changed volume across the audio frame instead of applying it at once.
The mixer applied each voice's mix volume and each splitter destination's
volume to a whole 5 ms frame as one constant, so the level jumped at the
frame's first sample whenever the game moved a volume, which is heard as a
click. It now keeps what each voice and each splitter destination was mixed
with in the frame before and goes from there to the new value in equal steps
across the frame's samples, as the console's renderer does. An unchanged
volume stays on the constant path.

A voice that has just started, one that was silent in the frame before or was
moved to another mix or splitter, a destination that is new or was moved, and
the first frame after the renderer starts take the new volume at once.

NX2NAVI_AUDIO_RAMP=0 turns the ramps off. The audio statistics line counts the
render passes that ramped a volume. tests/audio_mixer_check.py builds the
mixer with the rest of the runtime stubbed and checks the ramps and the cases
that must not ramp.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:17:48 -05:00
chrg6
202fd47ceb Let the flight recorder dump on its own when one frame flashes.
With flight = 1 and its thumbnails kept, the recorder now also writes a dump when a frame's picture differs strongly from the frame before and the frame after while those two agree, which is what a one-frame flicker looks like. Each thumbnail is reduced to 16x9 cells of mean brightness where the present thread already sees it complete, and a frame is a flash when at least three cells are more than 24 of 255 brighter or darker than in both neighbours, the neighbours being alike in those cells, around them and over the picture as a whole. A camera cut, a fade, a pan and shapes crossing the picture are no flash, and a frame beside one without a thumbnail is not judged. The dump is the one F8 writes, named "flash" with the frame's number in its header line, at most one every 30 seconds. flight_flash = 0 turns it off; flight_flash_diff and flight_flash_cells set the two thresholds.

On the thumbnails of earlier dumps the defaults flag the frames whose scene was white once and nothing in the runs without that fault. tests/flight_flash_check.py checks the test itself on drawn pictures.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:16:30 -05:00
chrg6
95dc476ee7 Scale the scene with the edge-adaptive filter where the game's own upscaler ran.
The stand-in for the game's upscaler enlarged the scene with a linear filter, which is softer than the console's picture. It now enlarges with the edge-adaptive filter the present already scales to the window with: the same shader, built a second time with a constant set so it squares what it filtered, as the linear pass does. The stored square-root values are filtered as before and the decode is the same. standin_filter = bilinear brings the linear pass back, and the setting is live. The linear pass also stays where nothing is enlarged and while DLSS or FSR 3.1 runs, since that upscaler scales the scene itself and its picture goes over the stand-in's. The movies do not go through this pass and are not changed.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:16:18 -05:00
chrg6
823e0cdcd4 Raise the pipeline cache's size limit to 1024 MB, and leave never-drawn list pipelines to their first draw on a machine short of memory.
The limit was 512 MB, and a file over it starts the run empty until a play file replaces it. With the pipeline list of 0.9.1 one run builds more than that: on an RTX 2080 Ti (#722) pipeline-cache.bin held 551 MB and the play file the run then wrote 541 MB, so both were dropped at every start, 7,247 of 8,531 pipelines were built again each time (17 s of the boot) and 541 MB were written in every session. Seven of the players' logs read here have a file over 512 MB, five of them between 517 and 691 MB. At 1024 MB those are read, the play file is folded in once and the loop ends; a start that still finds both files over the limit now says so.

pipe_seed_boot (auto, 1, 0) decides whether the boot builds the pipelines of the shared list that the install has never drawn. Each is a pipeline the driver holds for the whole run: the boot's pipeline stage went from about 1.6 GB of commit on 0.8.0 to 3.9-4.4 GB on NVIDIA cards with the list (1.5-1.8 GB on AMD's driver), and 0.3-0.6 GiB of video memory. auto, the default, builds them as before except on a machine that starts with less commit free than the game takes in play, the start's own memory warning: there they are made at their first draw from the pipeline cache and recorded as the install's own. Mesh pipelines are built at boot either way. Compiled; not run in the game.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:13:40 -05:00
chrg6
495d118e9e Add an experiment that turns the game's occlusion queries off, off by default.
The new patch set occlusion_off makes six reads of two parameter bytes read 0: CreateZPrePassOcclusionQuery and CreateSamplesPassedQuery, where the game first writes their options and where an update compares and stores them. The game is then left without its occlusion queries, their reports and the conditional renders that depend on them, and draws what it would have tested: more draws, and no query results to wait for.

patch_occlusion_off = 1 turns it on at the next start. The key has a row in the settings table, which gives the set its default, a section and an entry in nx2navi.ini.example. What it costs and saves in play has not been measured.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:13:30 -05:00
chrg6
cc0b467a2c Gather the log lines of a quarter of a second and write them at once.
The log thread wrote as soon as it woke, which outside a burst is once for every line: each line woke it and was a write of its own to the log file and the console. It now waits a quarter of a second from the first line it finds, or until the queue is half full, and writes what was queued by then at once, so the log is up to that much behind the game. What is being gathered stays in the queue, so a fatal error, a crash report and an exit write it out before their own lines as before; a game ended from outside loses those last lines. The queue's test checks the gathering, the half-full write and that a process which ends at once, by an exit or as a fatal error does, leaves every line in its file.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:12:51 -05:00
chrg6
91dd6de969 Make a draw whose shaders write memory wait for its pipeline like a one-shot draw.
A draw into targets the game renders every frame is left out while its shaders or pipeline build, because the next frame draws it again. A storage buffer the shaders write or an image they store into is not redrawn that way: with the draw left out, that memory keeps what it held for everything that reads it. Such a draw now takes the wait a draw into one-shot targets takes, from the frame's wait pool, and is skipped only at the end of it. Only the stages already translated can say that they write; a draw whose writing stage is still being translated is skipped as before. draw_writers_wait = 0 turns the rule off, and the periodic line about waited draws counts the draws that waited by it alone.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:12:51 -05:00
chrg6
afe44e0e54 Let the device address table read a new VRAM mirror only once the mirror's first copy has run.
A mirror is made while a submission is recorded, and its first copy of the pool is in that submission's prologue. The table's pages moved to the mirror at once, and the table is memory the shaders read as they run: every part already handed to the queue read the mirror through it before the copy had run, memory nothing had written yet and, on a card over its budget, a block the driver had not made resident for those parts. A GTX 1650 4 GB lost its device that way at area loads in every session of 0.7.1 (#507): six reports of a GPU read fault at byte 0 of a mirror made in the faulting submission, each the first byte of a new 2 MiB-aligned block, with mirrors being made over the budget, and none with the table kept empty. The mirror code is the same in 0.9.2.

Now the pages keep reading the imported buffer and take the mirror as their twin, so what shaders write through the table goes to both and what they read is guest memory, as before the mirror existed. Once the GPU has finished the submission that holds the copy, the pages move to the mirror with the imported buffer as the twin. gpa_late = 0 moves them at once, as before. tests/gpa_check.py covers the new table step; the mirror side was compiled and run through --probe-vkmem, not played.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:09:42 -05:00
chrg6
cacf458b08 Say in a lost device's report what the GPU was about to do when it stopped between two marks, and add draw marks.
A pass mark names the pass or dispatch the GPU had started and the last it finished. When the two are the same mark the GPU stopped in between, and the report named nothing: in a player's log of 0.9.2 (RX 6700 XT) both were one compute dispatch, with 51 later marks made and none started. The report now adds the mark that never started and the kinds of commands the replay recorded between the two (copies, clears, the upscaler, write-backs), which the gap notes already name for the GPU pass timing and now keep for every mark.

draw_crumbs = 1 (off by default, AMD buffer marks only) also writes a mark wherever the shaders or the pipeline state change inside a pass. The device losses reported on RX 6600 and RX 6800 class cards end inside one scene pass of 30 to 100 draws and the draw that hangs is not known; with the setting on, the report lists the shaders of the draws the GPU had not finished.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 14:57:21 -05:00
chrg6
e6392f381f Turn Link's own motion vectors on by default.
DLSS, FSR 3.1 and frame generation get the real motion of Link and his equipment unless selective_motion = 0 is set. Its two status lines come every minute or two instead of every two seconds, now that every session writes them.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 14:38:26 -05:00
chrg6
26f3dc47ec Show the low-end GPU mode's settings under its switch in the Game tab, and read them only while the mode is on.
The settings had a tab of their own; they are rows of the Game tab now, listed under the switch once the mode is on after a restart, and the tab is gone. With the mode off every one of them reads as unset, whatever nx2navi.ini or the environment says, so nothing of the mode acts unless a player turned it on; the build reads guest_opt the same way. The notes describe that, and take the white edges in towns and the dropped textures from the known issues to the fixes.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 13:59:43 -05:00
chrg6
d2fbaba1c3 Put the low-end GPU mode in the settings menu's Game tab, marked experimental.
The row sets low_end_gpu, read at start, and says what the mode turns on and that it was measured on one card; its text is there in the menu's four languages. The key is decided again once the settings file is read.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 13:06:02 -05:00
chrg6
2324a74602 Turn the settings for older graphics cards on with one key, low_end_gpu = 1, and leave them off without it.
Mesh shaders as compute, the texture that gets memory of its own, staged mirror uploads and the shorter wait for the GPU, widened write-watch queries, the video memory limits and reserve, early upload batches, the asynchronous replay, the hot-pool rule and the recording thread on AMD cards without mesh shaders were measured on a Radeon RX 580 and run on no other card. Each keeps what 0.9.1 did unless the key or its own setting says otherwise; the key gives the defaults the way the device profile does. The notes describe them as that option, hold main's two new entries in one Changed section, and list the white edges in towns as a known issue.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 13:00:13 -05:00
FIocker
58efccd883 Scale the slope-scaled depth bias with the shadow map scale, so the larger maps keep the bias the game asked for.
The slope term is a bias per unit of depth slope across one pixel of the target. A shadow map made k times larger on
each side (shadow_scale 2 to 4) has 1/k of the slope across each texel, so the game's factor alone gave k times less
bias on sloped surfaces than at the game's own size, which is what shows as acne. vk_exec_draw.c slope_bias
multiplies the factor by the pass's scale for both the direct draws (record_fixed) and the queued mesh draws; the
constant term counts the depth format's smallest steps and keeps its value. Nothing changes at shadow_scale 1.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 12:39:53 -05:00
chrg6
0533b3028e Keep the asynchronous replay, the hot-pool rule and the -O2 game code off unless a player turns them on.
The three change what every card does: the asynchronous replay can show a dark or flickering frame now and then, the hot-pool rule moves pools into system memory on every discrete card, and -O2 makes each rebuild of the game several times longer. Their rows stay in the settings tab. The USB joystick mapping is described by the device's own name, and the tab's introduction says what its settings are for.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:17:55 -05:00
chrg6
a464ffafbc Merge Tobim6's work for older graphics cards: mesh shaders emulated with compute, video memory kept within the heaps' budgets, staged mirror uploads and the submit wait that goes with them.
Conflicts: the settings key lists take both sides; frame generation keeps the camera-cut handling and logs its counters every 600 frames with the cuts among them; the pass-time mark moves into draw_viewport; mo_desc keeps the pose depth and notes the reader.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:14:58 -05:00
Vasilis Manetas
5fee8d7ab2 Hand every queue submission to the driver's own submit thread on Linux, so RADV's vkQueueSubmit2 leaves the replaying thread.
Mesa's Vulkan drivers keep timeline semaphores as kernel sync objects, and their queues submit on the calling thread unless a submission waits on a value not submitted yet. The replay hands a part of the frame to the queue each time it splits one off (vk_exec.c maybe_split), so every such vkQueueSubmit2, with the command stream's checks and the kernel's ioctl, ran inside the replay, the thread that limits the frame rate on an RX 6800 XT under RADV.

MESA_VK_ENABLE_SUBMIT_THREAD=1 sends every submission to a thread of the queue's own. vk_device.c mesa_submit_thread sets it before any thread can load the driver, unless the environment sets it already. submit_thread in nx2navi.ini (NX2NAVI_SUBMIT_THREAD) is 1 by default on Linux and 0 on Windows; 0 leaves the driver's own choice. On a Mesa driver the log says which one applies.

Kokiri Forest, 0.9.1, RX 6800 XT, Mesa 26.2.6, 3 pairs of 45 s runs of one build with the setting on and off: the replay took 13.9 ms a frame against 15.0, lower in every pair; frames over 25 ms fell from 910 to 406; the frame rate went from 40.0 to 40.8 fps, within the runs' noise.
2026-11-12 12:07:19 -05:00
chrg6
8946fc0201 Leave Link's own motion vectors off until they have been played, and take their settings through nx2navi.ini.
The pose motion vectors for Link and his attached equipment were on by default for game 1.1.1 and had not been run in
the game on this version. selective_motion = 1 turns them on. Its settings are listed among the known ones, so
nx2navi.ini takes them without an unknown key line, and the rotation threshold is read through the settings instead
of from the environment alone. nx2navi.ini.example describes the switch.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 10:44:12 -05:00
Tobim6
9259149527 Settings menu: a Lama patches tab with the settings of the RX 580 patches
Released textures kept, top texture levels left out, hot pools in system memory, the heap limit, the upload batch
limit, the kept ASTC buffer, mesh emulation and its arena and task records (greyed where the GPU has mesh shaders),
the overwritten-texture fix, the vector index fix, -O2 game code, pass times and the frame dump key. Each key gets a
row in the settings table; make_game.py reads guest_opt from nx2navi.ini when the environment does not set it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 16:22:31 +01:00
Tobim6
1534dc570a Mesh emulation: size the task records from the arena, and log what each submission asked for.
The task records were a fixed 4096 per submission (3 KiB each): a dense patch of grass that launches more task
workgroups in one submission lost the rest silently. Their count is now a push constant (NX2NAVI_MESH_EMU_TASKS,
default 16384) and the arena defaults to 256 MiB. The header counts what the stages asked for past the capacities too;
before the counters start over they go to a readback ring, and the perf line reports the most one submission used of
the vertex slots, indices and task records, and the mesh workgroups that did not fit. The first draws the emulation
skips are logged with the reason.

(cherry picked from commit 81cfd91bf468f13e4debf287d080f96637a4c382)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 16:22:05 +01:00
Tobim6
aec5b5a840 Emulate mesh shaders with compute on GPUs without VK_EXT_mesh_shader (NX2NAVI_MESH_EMULATION, off by default).
Without the extension every mesh draw was skipped ("mesh draws need VK_EXT_mesh_shader: skipped"): on an RX 580 the
game's grass and foliage were missing. The translator already builds each task and mesh program as compute code that
MeshSpirv.cs wraps into TaskEXT / MeshEXT modules; runtime/mesh_emu_spirv.c turns those modules into GLCompute ones:
outputs and payload move to workgroup memory, SetMeshOutputsEXT's counts are kept, and the entry function's end
reserves vertex slots and indices in an arena with atomics and copies the vertices and triangles out (task: the payload
and the mesh group count go to a task record, and the mesh dispatch to the draw record). A generated vertex shader
reads the vertices back for the game's fragment shader. Checked with spirv-val (Vulkan 1.3) on the 1016 task and mesh
programs of Ocarina of Time 1.1.1: 1008 convert and validate; the 8 point-list meshes stay unemulated.

vk_pipeline.c gives an emulated mesh pipeline a layout whose task and mesh bindings are visible to compute, with push
constants and a compute-side descriptor template, builds the generated vertex shader's graphics pipeline and the two
compute pipelines; vk_exec_draw.c prepares each mesh draw as before, then outside the pass zeroes the arena counters
(first emulated draw of a submission), fills a draw record, pushes the same descriptors to the compute bind point,
dispatches the task and mesh stages (direct, or from the indirect ring entry) and draws DrawIndexedIndirect from the
record. mesh_emulation = 1 turns it on; mesh_emu_mb sizes the arena (160 MiB).

(cherry picked from commit efc43b177694d8f8ce5700fcf28d80e889a45589)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 16:22:03 +01:00
Tobim6
4ba78a7b31 Add NX2NAVI_MIRROR_HOT: pools copied through their VRAM mirror every frame go back to system memory.
On an RX 580 with the scene at 854x480 the render passes take 11 ms of a 32 ms frame. The rest is the mirrors: 66 MiB
of CPU-written pages up and 76 MiB of compute-shader writes back each frame, mostly through six 6-16 MiB pools the game
refills every frame, with the GPU idle 7.8 ms a frame while those copies wait. With mirror_hot = N a mirrored pool whose
uploads, write-backs and merges average N percent of its size (and at least 1 MiB) a frame over 120 frames leaves the
mirror at the start of a submission: it comes off the mirrored list, the device address table points at the imported
buffer again, and the mirror buffer is freed after the next submission. Default 0, off.

(cherry picked from commit 82e5dcb682375fa48bbaffa1d61f825272544e36)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 16:21:56 +01:00
chrg6
518d55ed07 Draw lines as wide as the game sets them.
The game's line width was dropped at the call and every line drawn 1 pixel wide; the game draws two lines a frame at 4.5 pixels into a 144x144 mask. The width is now recorded with the draw state and set as dynamic state for draws of the line topology class, held to the device's range. Only pipelines of that class list the new dynamic state, so the others keep their entries in the pipeline caches and the driver's. line_width = 0 draws every line 1 pixel wide as before.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 09:31:04 -05:00
chrg6
ef3466ce4f Merge main into the 0.9.1 release: the launcher's Mods screen, the anti-aliasing choices beside FSR and DLSS, and the scene's last row and column filled before an upscaler reads it.
The 0.9.1 notes keep the release branch's text and take main's sections: New, the edge line under Fixed, and Changed.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 09:00:37 -05:00
chrg6
baad032500 Keep the fast link's waits at 3 ms a pipeline and 6 ms a frame.
The 8 ms and 16 ms tried in their place left fewer draws out in a scripted walk, but in play a frame that takes 10 to 14 ms longer felt worse to the player than one that is left out, in two sessions on the same install. The wait stays counted once for each pipeline, and a frame that has left a draw out already still waits for nothing more.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 08:49:26 -05:00
chrg6
9f7c8ae810 Wait 8 ms once for a pipeline met for the first time, and carry the compute variants in the pipeline list.
A draw that met a new pipeline waited 3 ms for its fast link, in every frame, which is just under what the link takes with the stage libraries in the driver's cache: in a first-visit session on a new install 66 of 87 such draws gave up at the end of the wait and their frame was held back. The wait is now 8 ms for each pipeline, counted from its first miss and shared by all its draws, and 16 ms for a frame, so a pipeline the driver has to compile costs one frame the wait and the frames after it nothing.

The pipeline list tool also takes the compute variants a game folder dispatched, which no pipeline record names and which were translated in the middle of play, and reads a list made before as one of its inputs.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 08:25:42 -05:00