An indirect mesh draw reads its workgroup count through a ring entry that a buffer copy fills, and a copy cannot be
recorded inside a pass: every such draw ended its pass, 45 times a frame in a village. The first draw of a run now
fills the entries of the mesh draws that follow it with only state, draws, counter reports and render conditions
between them, and those draws stay in the pass (mesh_ahead, default 1; 0 is the old way, ab switches in A/B blocks).
An entry is taken only by the draw it was filled for, at the same record address, while no other op was replayed
since. Counter reports count as staying in the pass because the replay closes their query inside it and writes the
value from the completion thread; the game reports one after most of these draws, and without that only 38% of the
draws were served.
Measured in the village: 42 of the 45 draws a frame are served by an entry filled ahead; gaps with these copies
41 to 3 a frame (0.22 to 0.04 ms of GPU time); passes and dispatches 248 to 208 a frame (302 to 254 in Hyrule
Field). With the piece release of the commit before, one run each: village 142.6 fps and GPU busy 3.87 ms (138.0
and 135.4 fps, 4.15 ms without this change), Hyrule Field 136.8 fps and 4.34 ms (131.5 and 131.3, 4.70 ms). In A/B
blocks of one run with the narrower rule (counter reports still ending a run) the GPU's busy time went from 4.81 to
4.64 ms.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A draw whose pipeline is still building is skipped when its pass is rendered every frame and waits otherwise, so that a lookup table or a volume generated once is not left empty. "Every frame" meant "in the last four frames", so after a loading screen or a full-screen menu every pass of the first frame read as new: each draw with a new pipeline waited on the replay thread, up to 30 s each, and a mesh draw, whose pipeline has no fast link, for its whole compile. A player's 0.7.1 log shows it at three area changes: frames of 954, 1015 and 684 ms with 853, 960 and 663 ms of pipeline wait, six mesh draws waiting 52 to 660 ms in passes whose targets had been rendered in thousands of frames.
The target history (now runtime/vk_target_frames.h) also counts the frames each target was rendered in, for as long as it is the same guest texture. From eight frames on its pass is per-frame however long ago the last one was, and its draws are skipped and built by the workers like any other (pipe_skip_steady, on by default). A target rendered for the first time still waits, now from one pool of 50 ms a presented frame that the full-screen draws share (pipe_frame_wait_ms; oneshot_budget = 0 gives the old wait back), a mesh draw 8 ms at most, and the wait for a one-shot draw's shader comes from the same pool (gfx_shader_await takes a limit). A full-screen draw with no picture left to hold waits 40 ms more instead of 500. One frame so waits under 100 ms for pipelines in all.
Every 600 frames with a miss the log says how many draws found a shader or pipeline missing, how long they held the replay thread in all and in the worst frame, by the kind of wait, and how many were skipped at its end.
tests/target_frames_check.py replays the area change of that log against the header. Not yet run in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Eight commits: a draw that misses its pipeline has the rest of its submission read ahead, the library workers link
the pipelines of skipped draws, a pipeline whose fragment shader reads a target of its own pass is fast-linked like
any other, and diagnostics. The merge was clean. Their before and after matrix had not finished when this was merged.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A thread that found the queue's lock taken for 4,000 spins wrote its line itself, ahead of the lines it had queued
earlier. On a busy machine the lock's holder loses the processor inside the copy and the lock stays taken for a time
slice, so one thread's lines reached the log out of order. A line now waits for the lock, and a line that finds no
room, or is larger than the queue, is written after everything queued before it.
tests/logq_check.py failed on this in 8 of 30 runs beside four busy processes and passes 100 of 100 now. It gained a
check that holds the queue's locks itself and fails on the old code every time, and it no longer depends on time: it
waits for the queue to empty, keeps the line about slow writes back except in the step that checks it, and counts the
lines that waited instead of timing the slowest.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Each frame the game sets one of two events to 0 from the CPU, submits its worker queues and the main queue, whose first command waits for that event to be 1, and signals 1 with nvnEventSignal once it has written what the frame's commands read. The recording of a submission takes the VRAM mirror sync and the uniform snapshot at its start and tested the wait a moment later, so a signal that arrived in between passed the wait and the frame was drawn from copies taken before the signal: single frames with the whole scene's shadowing missing (6 to 7 of 255 brighter, the sky and the interface unchanged) or a black scene, more of them the busier the CPU.
Every nvnEventSignal is now numbered and keeps the value it replaced, the recording notes the number before it takes its copies, and a signal with a later number does not count for that submission. The submission stops at the wait like any wait reached before its signal and goes on at once in a submission of its own, whose copies are taken after the signal. NX2NAVI_EVENT_AT_SYNC=0 gives the earlier test. NX2NAVI_EVO_TRACE=1 logs the order in which every frame's submissions, waits and signals were replayed, which is how the frames were found.
Measured with the flight recorder's thumbnails, 1,800 presented frames a run, standing in Hyrule Field by day with the lazy write-back on, DLSS Performance, frame generation 4x and HDR: the build before this change showed 34 single-frame spikes with eight busy threads beside the game, 20 with four and 8 with six, most of them in frames whose signal came during the replay; with this change two runs with eight busy threads showed 0 and 0, with 667 and 724 such frames. A session of the user's with the lazy write-back off ran 25,200 frames without a spike in its three automatic dumps while the change stopped 4,744 wait tests.
Not measured: runs of this same build with the switch off (the two tried failed for other reasons, a device loss during the boot beside another game and a load with cold caches), any run with the lazy write-back off under load, the frame rate and GPU time against the switch off, and the differential tests, which this change does not touch. The flicker with the lazy write-back off that was reported has not been reproduced in a capture; its mechanism is the same signal and occurs there too.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The next draw with a new pipeline was only found when the replay reached it, so the draws of an area's first frame,
or of a turn that brings several new materials into view, paid for their pipelines one after another while the
workers that could have built them together sat idle. The submission is recorded before it is replayed: the first
draw of a submission that finds a shader or pipeline missing now has the ops after it read (vk_exec.c vk_exec_ahead)
with the binds that decide a draw's shaders and shader libraries applied to a copy of the replay state. Each draw
there looks its shaders up as the real draw will, which also queues a shader that is not in memory, and names its
state to vk_pipeline_hint, which queues the pre-rasterization and fragment shader libraries that are missing. No
pipeline is entered and no key recorded, so a wrong guess costs two libraries at most. The draw's own lookup then
links on its thread when both libraries are there.
On a first visit to Kokiri Forest a scan read 6,900 ops in 0.78 ms on average (the longest 5.5 ms; a scan ends
after 3 ms), and the scans of the load and the walk named 377 states without a pipeline and queued 104 libraries
for them.
pipe_ahead = 0 (NX2NAVI_PIPE_AHEAD) turns it off.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
One conflict, in the build kit's notes, which keep both the shader cache item and the Texture detail text.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The textures of a loaded area are what fills a 6 GiB card: with the budget taken as 4,730 MiB a walk through Castle Town held 6,907 MiB of device memory, 4,302 MiB of it textures, 201 pools were refused their mirrors and the game ran at 20 fps. With texture_detail = reduced a mipmapped 2D or 2D-array ASTC texture of 256x256 and more that the game's CPU fills is made without its largest level, with low without its two largest when it is 1024x1024 or more. The same walk then held 5,472 MiB (textures 2,357) and 4,987 MiB (textures 1,997), and the ASTC texels decoded fell from 2,589 M to 826 M and 503 M. auto, the default, picks full from 8,192 MiB of device-local budget, low under 6,144 MiB and reduced between. full changes nothing.
The image holds the game's levels from the one it starts at (VkTexImage.skip), and the upload with its ASTC regions and BC3 encoding, WriteTexels, the write-back, the views and the sampler LOD clamp of combined bindings count from there. Render targets, storage images, 3D and cube textures, small and unmipped textures and textures the device samples as ASTC itself are left whole, as is a texture made over a live one that holds GPU-written content. A shader that fetches texels by position or uses a texture's size gets the texture whole: gfx_shader.c marks such bindings from the SPIR-V (the layer count of an array, which the translator's layer clamp asks for, does not count), and the replay makes a reduced texture bound there again with every level.
Not run on a card with 6 GiB: the figures come from an RTX 5090 with NX2NAVI_VRAM_BUDGET_MB=4730.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Whether a slot was stale was read from the released image's entry, which eviction, the released cap or a new image
at the address can destroy before the slot is looked up again; the slot then revived the texture from storage the
game had freed (the access violation in the block copy during a pool refresh). The flag now lives on the slot: a
release sets it on the slots registered with that descriptor, a registration clears it, and a finalized slot of a
CPU-written texture follows only live GPU content at its address.
From pull request #348 by TophC7, taken as it is.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Every log line was two writes on the thread that logged it, to stderr and to the log file. Such a write can stall for
tens or hundreds of milliseconds (a busy disk, a virus scanner, a console or a pipe that is slow to take it), and the
render thread logs too: a frame it spent in a write was a hitch with nothing else to show for it.
In a game run the lines now go into a queue that a log thread writes out in order (runtime/logq.c). A fatal error,
the crash report and the end of the process write the queue out on their own thread first and write their own lines
directly, so nothing is lost to an exit. A thread that finds the queue's lock held for long, or the queue full, writes
its line itself. NX2NAVI_LOG_ASYNC=0 writes every line where it is logged, as before.
Every write is timed in both modes: a "log: ... writes of the log took over 2 ms" line counts the slow ones, gives
the longest and says whose time they took.
tests/logq_check.py checks order and completeness with eight threads, a slow destination, a stopped destination with
the queue full, and the synchronous flush.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A signalled kernel event, or a thread that ended, woke every thread blocked in WaitSynchronization. Each woken thread
takes a virtual core before it looks at its handles, asking a running thread of lower priority for its core when all
are held, finds nothing signalled and blocks again. The audio renderer signals its event 200 times a second, so every
thread that waits for a message, a timer or another thread's end did this 200 times a second at the cost of the
threads that were working.
A wait now records its handle list, and a signal wakes the waits that hold a handle of the signalled event or thread.
NX2NAVI_SYNC_WAKE_ALL=1 (or ab) wakes them all as before, and the sched line counts the waits woken and left asleep.
tests/sync_wake_check.py builds kernel.c with the rest of the runtime stubbed and checks the wakes, the timeouts, the
cancel and that none of 4,000 signals to eight looping waiters is lost, in both modes.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The 2 GiB of device memory a filled cache cost was not the thousands of compute pipelines but twenty of them: the compute shaders of 0.9 to 2.0 million SPIR-V words, the game's tensor-core upscaler programs, which nothing dispatches. A pipeline of one holds about 100 MiB of device memory from the moment it exists, and the driver keeps that memory when the pipeline is destroyed, so keeping only the recently dispatched pipelines did not help: the boot pass still created the twenty from pipeline-cache.bin at every start. Measured with --probe-prewarm on a copy of an installed copy's caches (RTX 5090, NVIDIA 621.01): the pass over all 4,066 compute shaders took the device memory from 386 to 2,398 MiB and the process's commit up by 2.5 GB; the same pass before the twenty were in the cache left the device memory at 386 MiB, and all 4,046 other pipelines kept at once cost 2 MiB.
A compute shader over NX2NAVI_LIB_PREBUILD_BIG is now built ahead, from the caches or by the background builder, only when the usage record says a run dispatched it. None of the twenty is among the 138 shaders eleven runs dispatched. Should the game dispatch one for the first time, that dispatch compiles it once and later boots build it ahead.
The boot also reads the shader of a pipeline it does not keep as a copy and releases it after the build, instead of leaving 3,900 shaders loaded (240 MB of commit); a first dispatch then reads its shader from the disk, 0.04 to 0.10 ms in the probe.
With both, the same pass on the same caches leaves the device memory at 386 MiB and raises the commit by 47 MB; 256 first dispatches after it took 0.13 ms on average, 1.8 ms at most, all read from the cache file. With compute_keep = all, which builds everything as before, the pass ends at 2,528 MiB. Not yet run in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
An installed copy's warm list has 42,344 variants, 42,142 of them from shader-prepared.bin, and its 4,066 compute shaders are what the boot kept pipelines for. The comments and the settings text said the list grew with the play history; a copy with prepared shaders held the 2.3 GiB from its first boot. Comments, docs and the ini text only.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit ea984fe05b995c5dad1e0f49c5f44de9ee8f19b2)
The boot prebuild built the pipeline of every compute shader play ever recorded and kept all of them for the process. A pipeline that exists holds driver memory whether or not anything dispatches it: with a history of 4,066 compute shaders they held 2.3 GiB of device memory, and its share of the process's commit, from the title screen on (RTX 5090, NVIDIA 621.01), while a boot into the first village dispatched 95 of them.
The boot now keeps the pipelines of the 512 compute shaders dispatched most recently (compute-used.bin next to pipeline-keys.bin records which run last dispatched each; the setting is compute_keep, with "all" for the earlier behaviour). Every other one is still built at boot, so that the pipeline cache holds it after an update or a driver update, but destroyed at once, and created from the cache at its first dispatch. A dispatch that comes while such a build runs gets that build's pipeline.
Each boot stage now logs the device memory and the process commit it leaves ("mem: boot stage"), and the log says what the first dispatches cost. nx2navi.exe --probe-prewarm runs these stages without the game from the caches next to the executable and times first dispatches of pipelines the boot did not keep: 256 of them took 0.19 ms on average and 3 ms at most, all read from the pipeline cache file, and 372 pipelines built and destroyed at boot left the device memory where it was.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 16a796d623686bca5304eaf1b29981247453a413)
In the settings menu a click anywhere on a row stepped its setting to the next value, and the left arrow stood left of the value's text, so it moved whenever a value of another width came up: clicking the left arrow through a list landed on the row at the second click and stepped the other way. Each stepper now has its arrows in white frames at fixed places, the left one the width of the row's widest value from the right one, and the mouse changes the value on those frames only; a click on the rest of the row selects it. On and off rows have the same arrows. An arrow at the end of its values is drawn faint and does nothing, and a button held on an arrow repeats as a held key does. A, Enter and left and right work as before.
NX2NAVI_MENU_TEST_CLICK clicks rows by their setting's name during a menu test run. On an RX 7900 XT at 3232x1352 the arrows stepped the performance overlay one value a click and stopped at both ends, and clicks on the body of four rows changed nothing.
HDR between off and the tone mapper now follows the menu. The HDR path is set up at every start (vk_hdr_armed): the swapchain colour space and metadata extensions, the tonemap splice and the settings in the support buffer, with the spliced tonemap returning the game's own SDR result while the swapchain is SDR. A change of the setting makes the swapchain again in the other format. On the same card a run that started with HDR off went to an HDR10 swapchain and back, and one that started with HDR on went to SDR and back, with the picture right in each state. The game's native HDR still waits for a restart, as the game asks about the display once, and the row says so. NX2NAVI_HDR_LIVE = 0 leaves the HDR path out of a run that starts with HDR off.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The pool refresh runs before every draw that binds the pools, so its count budget of 16 creations held per draw, not
per submission. An area load in the 0.6.1.12 test made 4,925 entries (1.7 GB of uploads) in one 430 ms frame, and
2,018 in a 195 ms one. While slots were left over, every draw walked the whole table and looked each of them up again,
about 100 ms of the 430 ms frame in key hashing alone.
Once a frame's refreshes have taken pool_create_ms (default 6 ms; 0: no limit), they create nothing more until the next
frame, and skip the slots left earlier in the frame. The first refresh of each frame keeps its count budget. The slots
left keep their stand-in for a few frames during a large load.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A profiled traversal session had 9 of its 16 worst hitches (100 to 500 ms) inside the render thread's shader lookup,
reading <key>.res.json and <key>.spv of shaders met for the first time: opening a loose file costs about 3 ms the first
time on Windows. get_async_one now reads in place while those reads stay within 1/8 of the wall time (2 ms at once);
past that three loader threads read them and the draws wait as for a translation. The perf line counts both.
The launcher's updates carry the shaders over and never packed the cache, which held 44,000 loose translations in the
test install. An update now packs it once it holds 1,000 loose ones, and the pack tool reads the loose files on 16
threads.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every shader cache key names the translator, so a release with a new translator had no cached translation at all:
the launcher re-translated about 42,000 programs before play, and play waited for any program not prepared.
The cache now lists the translator identities it holds translations of in shader-cache/identities.txt, newest first.
A shader the current translator has no translation of uses a previous one's, looked up with that identity mixed with
this machine's host options and read with the usual checks; it keeps that translation for the rest of the session, so
no pipeline is built twice. After the boot prewarm a background pass translates every stored input that has a previous
translator's entry again under the current one, on its own translator child at idle priority that waits while the
game translates. A program the new translator refuses keeps its old translation and is logged. Once the pass has gone
through every such input, the old entries of what it covered are dropped: loose files are deleted, and a pruned copy
of shader-cache.pack replaces the pack at the next start when the pack is still the one it was copied from.
--prepare-shaders still translates everything under the current translator. NX2NAVI_SHADER_CARRY=0 keeps the earlier
behaviour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game's ACES tonemap shader gets a GLSL function linked into its SPIR-V where it clamps each channel: the game's SDR result upgraded to the HDR range by luminance and mapped to the display with the RenoDRT curve, exposure, highlights, shadows, contrast, saturation, highlight saturation, blowout, flare and hue correction. The settings reach it as four vec4 the support buffer gains at 1440. The present encode is a port of the swap chain pass: gamma correction, gamut compression, the peak clamp and PQ. Without an HDR10 swapchain the shader gives the game's own SDR picture; native HDR is unchanged.
The menu offers Off, RenoDX and Native, with gamma correction, the tone mapper and its grading rows. The shader build compiles sources marked "keep functions" without optimisation so their functions survive for the splice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In-game menu: the settings window, its tabs, rows, buttons and cursor, the performance overlay and the Preparing
shaders box are drawn with the game's interface textures where the RomFS holds them (runtime/ui/menu_skin.cpp,
perf_panel.cpp; plain shapes until they are decoded). Restart joins Continue and Quit, each behind a confirmation;
VSync is an on/off switch; DLSS is listed only on NVIDIA GPUs; the menu sounds are quieter; Picture shape is gone and
the setting descriptions are shorter; edge cases of input, layout and fonts are fixed. tools/menu_preview.py draws the
menu without the game.
Launcher: Import Saves takes a save from the game folder's saves/ folder or one the player picks; downloads fall back
to Windows' own certificate check when Python's refuses a server; updates are faster; the title bar is drawn in the
window and Navi is every icon. tools/make_game.py builds with CLANG64's clang where the launcher installed it, packs
the RomFS beside the lift and the compile, takes a prebuilt runtime, and compiles the game's resources without cmd.exe,
so a user folder with a space in its name builds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game used to start after at most 3 s of prewarm, so after a translator, GPU or driver change it met the rest of
its shaders in play and stalled on each one. It now waits for all of it: a warm start is ready in about half a second
and shows nothing, while a cold one shows a "Preparing shaders" screen in the menu's colours and the game's fonts, with
the shader and then the pipeline count and a bar. The shader and pipeline prewarm report their numbers every 100 ms.
The present path takes a frame without a game image for the screen. The RomFS opens on the first host-side read, so
the screen's fonts load before the guest's first file access. NX2NAVI_PREWARM_WAIT_MS now defaults to 0 (no cap). With
no progress for 60 s the game starts anyway and the prewarm finishes in the background.
Measured with an emptied cache: 2,988 shaders translated and 2,399 pipelines built in 9.4 s behind the screen, then
0 ms shader and pipeline waits in Kokiri Forest. Warm: the game starts 0.47 s after launch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Comments say what the code does and why, docs/maxwell.md keeps the Maxwell facts, and fetch_refs.sh clones only the checkout the build reads. Code is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ocarina steps its game by the clock (the same frame-numbered walk covers half the distance at 120 fps), so in a build
without the fps60 and realtime patch sets the pacer holds frames to the frame limit alone: any rate from 30 to 1000,
the monitor's rate, or unlimited (164 fps average in Kokiri Forest). The menu always shows the row, with 165, 240 and
Unlimited added. NX2NAVI_PACE_HZ sets the pacer's rate for tests.
A compute pipeline is compiled outside the pipeline lock, and one compile serves the replay and the boot prebuild
alike; the prebuild uses half the CPUs. The guest waits at most NX2NAVI_PREWARM_WAIT_MS (3000) for the boot prewarm,
which then goes on in the background (a cold start waited 9.8 s). NX2NAVI_TEST_PAD_AT attaches the test gamepad late
and presses it, to test a controller switched on in play.
README, docs/architecture.md, docs/controls.md and AGENTS.md describe the Ocarina build.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>