Commit Graph

12 Commits

Author SHA1 Message Date
chrg6
328554e7c6 Run the sound manager's job at 60 Hz with whole steps above 60 fps.
The job (main+0x415300) hands the time manager's step to the sound system in its phase 0 and runs the sound objects'
and the system's updates in phases 1 and 2. With the set ostep that step is a fraction of a frame above 60 fps, and fed
fractions the game has been reported to keep sounds held after an area unloaded until no voice was free, new sounds
and then the music going silent until a restart. The new set osound (sound_steps, on by default) calls the page's
+0xf10 after the job's prologue: phase 0 adds the step to what the job is owed and runs once a whole step has built
up, phases 1 and 2 follow that choice, and a job that does not run gets phase 3, which returns through its own
epilogue. After phase 0's load of the step the page's +0xf00 makes a fraction one whole step. At 60 fps and below
the job runs every frame with the game's step. Both sites were checked against the module; frame_step_check covers
the gate at 60, 30, 144 and 240 fps. Needs the game code generated again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 05:54:58 -05:00
chrg6
f512a98988 Give the water and floor surfaces' fixed-step remainders as many slots as the waters' ripples.
Every interactive floor of a place and both water managers ask frame_rate_sim_host once an update, each for its own
object. With 8 slots, a place with more such objects than that had them take each other's slot in turn, start
without a remainder every update and stand still above 60 fps, as before the set owater. The table now has 64 slots,
as the ripples' has, and frame_step_check runs 32 surfaces at 144 fps.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 05:54:58 -05:00
chrg6
2970b0c7d6 Add a floor scan that finds the floor carrying Link in guest memory on 1.1.1.
The Deku Tree's floating platform is not one of the engine's ground groups, and where its position lives is not known.
With floor_scan set (off by default), once Link has been carried at 60 fps for 30 frames with the left stick at rest,
one snapshot of the game's heap and alias regions keeps every float triplet near him; 30 frames later the triplets
that moved as far as he did are kept, and from then on each frame logs the twelve of them farthest from him with their
addresses, positions and moves. The snapshot logs how long it took.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 04:36:29 -05:00
chrg6
0d7289af11 Let the floor probe read all of the Deku Tree's ground groups cheaply in two batched copies a present.
The manager there holds 5345 entries, which the 512 cap skipped. The probe now checks the entries' range once a present
and copies them and the rows of the groups they name (those in the guest heap) with mem_copy_readable, which takes one
lock and no system call per read; the cap is 16,384 again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 04:15:41 -05:00
chrg6
750034b7fd Run the water and floor surface simulations at their own 60 steps a second above 60 fps on 1.1.1.
The physics' two water managers and the game's interactive floor simulation (the Deku Tree's ground webs) step their
surfaces in fixed steps of 1/60 s, as many whole steps as the frame's time holds, and drop the fraction, so every
frame shorter than 1/60 s ran none and the surfaces stood still above 60 fps. The new set owater (water_steps, on by
default) calls the page between the division and the game's cut, which keeps the fraction per object; at 60 fps the
count is the game's.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 03:42:40 -05:00
chrg6
c37fb7dc40 Hold each frame's start in the driver while low latency is on, and let that keep the frame limit.
The driver's sleep sits where the game's frame starts: at its first pad read or window image acquire after a present,
whichever comes first, before the input is sampled. The frame's number, the count of the game's presents, goes with
its work: the guest thread marks the simulation and the first submission, the replaying thread tags its queue
submissions and marks their end, and the present thread marks the host present, which carries the number too. The
window's swapchain is made with the latency mode while NVIDIA's path is on, and remade when the setting changes.

While the mode is in effect the pacer holds nothing, so a picture goes out as soon as it is drawn and the limit is
kept by the driver before the pad is read; RivaTuner Statistics Server is kept out as with frame generation. The pacer
takes the limit back while a movie plays, while no host present goes out, and for the rest of the run when the frames
show the driver does not hold it. With the mode off every hook returns at its first check.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:29:59 -05:00
chrg6
6d049c244f Keep the water's ripples moving above 60 fps by carrying the step's fraction for each water object.
The water renderer runs trunc(step) times the water's substeps of its ripple simulation a frame, which is none while the step is under one frame: the rings stood still above 60 fps. A new site of the set ostep hands the cut to frame_rate_water_host, which adds the step to a remainder kept for the water object and returns the whole steps in it. The waters have a table of 64 slots of their own, as fewer slots than surfaces would have them take each other's in turn.

frame_step_check.py calls the water and day hooks as their sites do. It also gets the three platform stubs it has lacked since the day clock's hook, without which it did not link.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:13:19 -05:00
chrg6
d3e50328bf Keep movies with their sound at any frame rate: one movie frame per update, and the pacer keeps the movie's slots through a late frame.
The game's movie player adds the time manager's step to an accumulator at each update and advances the movie by whole
pictures of it, at most the player's limit per update, which is one for the Triforce movie. While a movie plays the
game is held at 60 updates a second, but every late frame cost an update, the pacer started its slots again from the
late one, and the steady step's payback of the lost time came as steps over one frame, which the player cannot turn
into more than one picture. So each late frame put the picture further behind the sound, which plays by the clock, and
it never caught up.

While a movie plays the step is now exactly one movie frame, and the pacer keeps the movie's slots through a lateness
of up to a second, presenting the frames after a late one at once until the game is back on them. The updates then
average the movie's rate, and the picture, the event's update count and the game's clock all stay with the sound.
movie_clock = 0 gives the earlier behaviour. The movie log now measures the picture on screen against real time where
the game releases it (the game fetches pictures ahead into a list of its own) and reports it at the end of each movie.
test_hitch = <every>:<ms> makes a frame that much late every so many presents, for test runs.

Measured on the Triforce movie (event Dm_Kokiri_0095, 7,040 pictures, 117 s), one exe with movie_clock = 0 against 1,
and a 70 ms late frame every two seconds (test_hitch = 120:70), as a run with natural hitches had shown a drift of 40 ms
every ten seconds. Drift of the picture on screen behind real time, from the movie's first 10 s to its end:

  fps_limit   before (updates/s, drift at the end)   after (updates/s, drift over the movie)
  unlimited   58.86, 2,187 ms behind                  60.22, flat at 53 to 55 ms
  144         58.86, 2,196 ms behind                  60.04, flat at -11 to -15 ms
  120         58.98, 2,257 ms behind                  60.20, flat at -1 to 0 ms
  60          58.88, 2,220 ms behind                  59.98, flat at -21 to -22 ms

Without the late frames both kept time (unlimited: before flat at 21 ms, after flat at -13 ms). The selftest,
--probe-cfg, --probe-kernel, --probe-movie and tests/frame_step_check.py pass; the check now plays a movie started at
240 fps with late and short frames and needs exactly one frame every update.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 15:09:16 -05:00
chrg6
8159908675 Bring four tests in line with the merged code.
The frame step test gets a stub for the debug menu's game speed, which frame_rate.c now reads; the mouse camera test
one for the input script's perf segment mark. The shared save test defined mem_probing twice. The launcher's self-test
draws 16 screens now that both lines added one.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 08:23:56 -05:00
chrg6
420aef041a Correct what a review of this intake's commits found.
A second reading of the commits taken in from pull requests found these, each traced in the code:

- heap_lazy: the camera speed's search read the whole heap, which with the setting on committed every page and undid what it saves; a scan now steps over the pages the lazy heap never committed (mem_untouched_run). tests/frame_step_check.py and tests/save_share_check.py no longer linked (frame_rate.c and fs_host.c call the new memory functions; the second also missed mem_probing before); both pass again. The settings text says that with the setting on a PC out of commit ends the game in play, not at start, and the census comment is back over its own function.
- Pipeline libraries on AMD's older Windows driver: the condition is the driver for RDNA 2 and older (RX 400 to RX 6000), not RX 5000 and RX 6000 only, and the texts named a price the code does not have. With libraries off a new pipeline is built by a worker while its draw is left out, and the start waits for every recorded pipeline instead of 20 s at most. The texts say so, and that the finding is one player's on one card. The menu strings nothing shows are as they were.
- Page file hint: it comes only when Windows sizes every page file, and it names the initial size and the automatic management that must be unticked first.
- Frame generation note: it keeps "needs an RTX 40 or newer" for the players it is right for and points the others to the log; the bridge's line says it is Streamline's general support check.
- Comments and settings texts that still described the old behaviour: the process commit bound, the wait with shadow storage, the scratch's least size, the action prompt under auto.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 19f03aa01b26d6e17fb5fc70ad987aa8c68e8225)
2026-11-11 00:39:50 -05:00
chrg6
63c7d3cb74 Make the frame limit count the frames the game draws, with frame generation on top.
The limit counted the frames on screen, so the game was paced at the limit over frame generation's multiplier: 60 at 4x drew 15 frames a second, and each step up of the multiplier took drawn frames away. Now a limit of 60 at 4x is 60 drawn and 240 shown. Only the display choice still counts the screen's frames, since a frame past the monitor's refresh is never seen, and with no limit set the default is 60 drawn rather than the monitor's rate.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 11:48:24 -05:00
chrg6
4cbdecb64b Round the physics solver's step count up above 60 fps and give Ocarina a steady step.
Above 60 fps players fell off moving platforms. The physics system takes its solver step count for a frame as
trunc(frames per update * 4 + 0.001): 4 at 60 fps and 8 at 30, the rates the game ships with, but 3 from 61 to 80
fps, 2 to 120, 1 to 240 (144 solver steps a second at 144 fps against 240 at 60), and 0 in a frame shorter than a
quarter of a 60 Hz frame. The solver skips its whole solve and sub-integration loop at 0, so such a frame resolves no
contact or friction and moves no rigid body. At a 240 fps limit, which "unlimited" paces at too, that was the frame
after every late one: the pacer keeps its phase, so the next display interval is shorter than the period.
The new patch set osolver rounds the count up, ceil(frames per update * 4 - 0.25): 4 and 8 as before, never fewer
steps a second than at 60 fps, at least 1. physics_steps = 0 gives the game's own count.

The step itself was the mean of the last five display intervals and changed with every frame: intervals of 5 and 30
ms in turn gave steps of 15 and 20 ms in turn, and one 60 ms frame at 200 fps took the step from 5 to 16 ms for five
frames. The game never saw a changing step on the console. The step is now the mean of the last 12 intervals without
the longest and the shortest, is the pacer's period when within 3% of it (at a 60 fps limit exactly one frame, every
frame), and repays the time the game was not given at up to a tenth of the step, so game time still follows the
clock. It is at least 1/480 s. step_steady = 0 gives the mean of five again. With trace = perf the fps lines show the
shortest and longest step and the time owed.

tests/frame_step_check.py drives frame_rate.c with made-up display times and the rest of the runtime stubbed.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 22:54:46 -05:00