The hidden beta shared story progress through a relay a player had to run and never showed the other players. A new co-op replaces it. Gone are runtime/coop*.c and their headers, the menu's Co-op tab and its texts in four languages, tools/coop_relay.py, the co-op tests, docs/coop.md, the [coop] section of nx2navi.ini.example, the --probe-coop mode, the coop trace item, and Monocypher, which only this layer used.
The old settings stay known as retired keys, so an nx2navi.ini that still sets them logs no unknown key, and they stay on the list of private settings, so a bug report keeps a room's secret, a relay's address and a name out. The platform layer's UDP sockets and fs_save_snapshot stay for the new co-op; cfg_ini_now and fs_profile_path, which nothing else called, are removed.
Checked: the game builds and starts, the menu shows its four tabs, --probe-cfg and --probe-fs pass, and the launcher's private-settings test passes. tests/save_share_check.py builds without its co-op stub; it cannot run from this worktree because the folder's path is longer than Windows allows, on main too.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Balanced, the default, is what the earlier commits made the default. High keeps what DLSS, frame generation's
HUD-less picture, FSR 1 and SMAA made after they are switched off, as before them. Low also sets, for the keys the
player leaves unset: released textures keep at most 1 GiB (tex_released_mb), textures give way from 70% of the video
memory budget (tex_vram_pressure) and the shared pipeline list is built at first draw (pipe_seed_boot = 0). Unsampled
live textures are not dropped in any of them: that eviction left the ground see-through for good. The values come
after the device profile and the low-end mode (cfg.c VRAMLOW); the row is in the Screen tab under Texture detail and
takes effect after a restart. The architecture notes describe the new memory report lines.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The settings had a tab of their own; they are rows of the Game tab now, listed under the switch once the mode is on after a restart, and the tab is gone. With the mode off every one of them reads as unset, whatever nx2navi.ini or the environment says, so nothing of the mode acts unless a player turned it on; the build reads guest_opt the same way. The notes describe that, and take the white edges in towns and the dropped textures from the known issues to the fixes.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Each player keeps their own game and save. One player makes a room, the others join it with its secret, and story flags and, by the room's rules, items, songs, quest items, small keys (a shared pool), rupees and ammunition reach every save. The layer is a host thread with one UDP socket to a relay the players run themselves (tools/coop_relay.py, Python's standard library only); the messages between the players are sealed with a key from the room's secret (XChaCha20-Poly1305, Monocypher 4.0.2 vendored with its licence and a row in THIRD_PARTY_NOTICES.md), every change is signed by the player who made it, a player accepts a room by its members' keys and the key of its rules, the save is copied to coop-backup before anything is applied, and values are set through the game's own routines between frames. The Co-op tab makes, joins, accepts, removes and leaves, and the menu takes typed text for the name, the relay and the secret. This is the contributor's pull request #518 on this line.
Nothing reaches the network while co-op is off: the socket is opened, and the relay's name looked up, only after co-op is on, a relay is set and a room is made or joined. There is no default relay.
Left out of the pull request: the other players drawn in the world (the "puppets") with the copied engine they need. They were unfinished, added two patch sites to the game's per-frame update that could not be put through the differential tests here, and their file helpers clashed with the ones this line already has. So no position is sent: the POS message's codec stays, nothing sends it.
Changed against the pull request:
- The menu's test hook drives the Co-op tab only when it comes from the environment. From nx2navi.ini it could turn co-op on, join a room and accept its offer.
- The log's label for a room is hashed from the secret instead of being its first three characters.
- A game that has not saved yet has no save to copy, and takes nothing from the room until it has saved once; that used to count as a copy made.
- A PING's token no longer carries the PC's uptime.
- On Windows the maker's key file and its folder get an access list with the player's account alone.
- The tests that link the platform layer get the socket library, and the save test a stand-in for the title screen's hook.
Checked on Windows, where the pull request had never been compiled: the runtime builds and links; --probe-coop passes (sockets on 127.0.0.1, the codec against its byte vectors, a fuzz of every parser, two sessions through a hostile mock relay, a relay restart, the sync engine); tests/coop_relay_test.py passes its 61 tests, with the probe through the real relay on 127.0.0.1 at 0 and 30 % loss; tests/coop_page_check.py passes and its deliberate fault fails 48 checks. Not checked: two games in one room (one game runs at a time here), any real network, the tab in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A player on an AMD card reported crashes in fights and that a line added to nx2navi.ini cured them. That line, async_compute = 1, is no setting of the game, and neither are two more in the same file; the one line of the file that changes how memory reaches the GPU is wb_lazy = 0. A second report, an RX 6600 on 0.7.1, lost its device 3.5 minutes into play with the lazy write-back on. Neither proves it the cause: the player changed several lines at once and sent no log, the RX 6600's last pass mark is inside a draw pass and not a fetch, cards with 8 GB lost their device the same way on NVIDIA before the lazy write-back existed, and reading the fault handler, the fetch, the arming and the buffers' lifetimes found no failure path. What depends on the driver and cannot be checked without the card: pages of guest memory are inaccessible while a host-pointer import of them is bound and written by the GPU, and Vulkan calls run inside the access-fault handler.
The default is now decided once the driver is known (wb_lazy_choice.h, vk_memory.c vk_mem_lazy_decide): on under Windows as before, except on AMD's driver branch for RDNA 1 and 2, which none of us has run it on; AMD's driver for RDNA 3 and newer keeps it on, since builds with that default were measured on an RX 7900 XT. What the player sets wins everywhere, and one line at start says the choice and its reason. On those cards open areas run at the 0.7.0 frame rate again (on an RTX 5090 that was 65 fps against 90 in Hyrule Field; not measured on AMD). tests/wb_lazy_check.c checks the choice by platform, driver and setting without a GPU.
For reports of this kind the log now holds what was missing. At start: every setting nx2navi.ini sets, and in one line the keys that are no settings of this version and do nothing; the settings menu shows those in its bottom row. At a fatal error or a crash: one line with the card, its driver, the memory mode, the lazy write-back with its reason, armed ranges, fetches so far and a fetch in progress, and the texture detail (dispatch.c rt_fatal_note_add, vk_device.c fatal_note), since a report is often the end of a log alone.
--probe-cfg loads the player's file: the three lines are named, and the menu's save keeps them and every other line it does not change byte for byte. Nothing here ran on an AMD card, and no fatal error was provoked to read the new line.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A setting read at the start showed "after restart" under its value always. The values the game started with are now
kept (cfg.c start_values), a row shows the note only while its value differs from them, and the Restart button counts
the settings that wait, the upscaler, frame generation and HDR among them. A value the environment sets never waits.
--probe-cfg checks the count.
From pull request #377 by mooki000. Three conflicts in the menu resolved against the frame generation rows that came
in since: the upscaling row keeps its description by what can load, and the frame generation restart test knows both
ways NVIDIA's runs.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The draw path called getenv("NX2NAVI_SKIP_PROG") for each of ~2,000 draws a frame, and getenv walks the whole environment block: in a replay-thread profile it was a sixth of the samples. That switch, the polygon offset log and the ASTC alpha probe now read the environment once. The replay's cost per draw went from 3.7-5.0 us to 1.2-2.8 us in play, and the mean frame rate by minute from 60-131 fps to 103-243 fps (different places in each run, so the figures are approximate).
cfg_get and cfg_value keep each thread's answers per name until the settings version changes (cfg_set, cfg_reset, cfg_load, and cfg_setenv, which the code that sets NX2NAVI_ variables in the process's own environment now uses); NX2NAVI_CFG_MEMO=0 asks every time.
The texture pool creates at most pool_create_budget (NX2NAVI_POOL_CREATE_BUDGET, default 16, was a fixed 64) new texture entries per refresh. The refresh holds the texture lock throughout, and streaming new textures in made 20-40 ms frames; at 16 the lock was held 5 ms per slow frame instead of 24 in a dense area, and the frames over 25 ms in a heavy minute fell from 111-188 to 89, with no pop-in seen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
pad_layout defaults to nintendo: Switch A on the right face button, B bottom, X top, Y left, on an Xbox pad too, where
auto had picked the Xbox layout. The settings probe checks every button's position.
Menu: the "default" mark follows the Steam Deck profile's values (cfg_default); Left on a value the list does not hold
goes to the last entry; the HDR row says "in use: off" when the swapchain is not HDR10; the open state is read again
after taking the reset, so a menu opened by F1 while the overlay alone was drawn starts with its focus row; the font
atlas is rebuilt only for a scale more than 12% off or one that held for half a second, so dragging the window's edge
no longer rebuilds it every frame.
A shader that fails to translate keeps its request and code in the shader cache. NX2NAVI_GPA_TWIN=0 turns the guest
copy of device address table stores off (diagnosis). The memcpy override no longer prints its first 500 calls.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>