Commit Graph

313 Commits

Author SHA1 Message Date
chrg6
175033d49a Merge main's co-op switch name into the 0.10.0 line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

# Conflicts:
#	runtime/cfg.c
2026-11-13 05:58:46 -05:00
chrg6
328554e7c6 Run the sound manager's job at 60 Hz with whole steps above 60 fps.
The job (main+0x415300) hands the time manager's step to the sound system in its phase 0 and runs the sound objects'
and the system's updates in phases 1 and 2. With the set ostep that step is a fraction of a frame above 60 fps, and fed
fractions the game has been reported to keep sounds held after an area unloaded until no voice was free, new sounds
and then the music going silent until a restart. The new set osound (sound_steps, on by default) calls the page's
+0xf10 after the job's prologue: phase 0 adds the step to what the job is owed and runs once a whole step has built
up, phases 1 and 2 follow that choice, and a job that does not run gets phase 3, which returns through its own
epilogue. After phase 0's load of the step the page's +0xf00 makes a fraction one whole step. At 60 fps and below
the job runs every frame with the game's step. Both sites were checked against the module; frame_step_check covers
the gate at 60, 30, 144 and 240 fps. Needs the game code generated again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 05:54:58 -05:00
epicmeme546
a01910d905 Give the new co-op's switch a name of its own, so an old "coop = 1" turns nothing on.
The Steam co-op took the setting name of the old beta's switch, coop. A player whose nx2navi.ini still had coop = 1 from that beta got the new co-op switched on at the first start of the new build, unasked: the game signed in to Steam as its test app. The switch is now coop_steam (NX2NAVI_COOP_STEAM), off by default, and coop is a retired key like the old co-op's other settings: known, read by nothing.

--probe-cfg now loads a file of the old co-op and checks that its keys are no unknown keys, that coop = 1 leaves the new co-op off, and that coop_steam = 1 turns it on; it passes on a build of this commit. The game itself was not started with the change.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-13 05:30:56 -05:00
chrg6
a7e79b3460 Bring the line's floor scan into the co-op branch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 04:54:51 -05:00
chrg6
27dae195ab Arm the floor scan only on a sideways drift and keep what lies below Link, logged once a second.
Scan run 1 armed on a floor that only sinks and found points 3.4 m above Link that follow him (the camera's). The scan
now arms on a straight horizontal drift at a steady height, snapshots from 4 m below Link to 0.5 m above, keeps the
triplets that moved with him and lie more than 0.3 m below him or more than 0.5 m from his feet, and logs each of them
(64 at most) once a second with its move over that second.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 04:45:52 -05:00
chrg6
da65aa6099 Bring public main's Steam co-op, the removal of the old co-op and the launcher's Steam library file into the 0.10.0 line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 04:37:01 -05:00
chrg6
2970b0c7d6 Add a floor scan that finds the floor carrying Link in guest memory on 1.1.1.
The Deku Tree's floating platform is not one of the engine's ground groups, and where its position lives is not known.
With floor_scan set (off by default), once Link has been carried at 60 fps for 30 frames with the left stick at rest,
one snapshot of the game's heap and alias regions keeps every float triplet near him; 30 frames later the triplets
that moved as far as he did are kept, and from then on each frame logs the twelve of them farthest from him with their
addresses, positions and moves. The snapshot logs how long it took.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 04:36:29 -05:00
epicmeme546
cd2f9f12be Add an experimental co-op through Steam: rooms, invites, names in the world, chat and shared progress.
Up to four players, each in their own game and save, meet in a room. Rooms are Steam lobbies and the games talk through Steam's networking, so nobody forwards a port and nobody runs a server. The game signs in to Steam as its test app (480), so Steam shows the player as playing Spacewar. Off by default; the menu has a Co-op tab with Create a room, Join a room by its ID, Invite a friend, the players, chat and Leave, in English, Russian, Brazilian Portuguese and Simplified Chinese.

runtime/steam.c loads steam_api64.dll from beside the exe at run time and declares the C functions it calls itself; nothing of the Steamworks SDK is in the repository, and a player copies the file from a Steam game they have. runtime/coop.c is the room: the lobby's owner is the host, lets games of the same protocol and game build in and lists them, and every game takes positions, chat and progress only from the players on that list. runtime/coop_game.c reads Link from the Player actor and shares progress, items, songs and quest items through the game's own flag routines, each value only ever raised; small keys, rupees, ammunition and hearts stay each player's own, and the save is copied to coop-backup before anything of a room reaches it. The other players show as a name with a distance where their Link stands, projected with the upscaler's camera.

One Steam account cannot be in a lobby twice, and this PC has not the memory for two games, so the room and the game side were run with one game and tests/coop_peer.py as the second player over runtime/coop_local.c, a stand-in for Steam on 127.0.0.1 that only the environment turns on: the peer was let in, saw the game's Link in Hyrule Field, chat went both ways, the save was copied, one flag the save lacked was set and a flag the game does not share was refused. On Steam itself one game signed in as app 480, made a room, showed its ID and the player's Steam name on the Co-op tab and left. Not run: two Steam accounts in one room, an invite, a join by room ID over Steam, a host that leaves, a removal, and the menu's text probe on this build.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-13 04:16:17 -05:00
chrg6
a9f161579b Add a floor probe that logs Link on a moving floor each frame on 1.1.1.
Above 60 fps Link stands still on the Deku Tree's floating platform while it moves under him, and the code that carries
him is not found yet. With floor_probe set (off by default), each present logs the frame's step, Link's position and
how far he moved, and the nearest moving ground group of the engine's ground manager with how far it moved, so one run
at 60 and one above it show where the carry is lost.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 04:04:05 -05:00
chrg6
750034b7fd Run the water and floor surface simulations at their own 60 steps a second above 60 fps on 1.1.1.
The physics' two water managers and the game's interactive floor simulation (the Deku Tree's ground webs) step their
surfaces in fixed steps of 1/60 s, as many whole steps as the frame's time holds, and drop the fraction, so every
frame shorter than 1/60 s ran none and the surfaces stood still above 60 fps. The new set owater (water_steps, on by
default) calls the page between the division and the game's cut, which keeps the fraction per object; at 60 fps the
count is the game's.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 03:42:40 -05:00
epicmeme546
c84c035939 Remove the co-op of 0.8.0: its runtime layer, relay, menu tab, settings, tests and docs.
The hidden beta shared story progress through a relay a player had to run and never showed the other players. A new co-op replaces it. Gone are runtime/coop*.c and their headers, the menu's Co-op tab and its texts in four languages, tools/coop_relay.py, the co-op tests, docs/coop.md, the [coop] section of nx2navi.ini.example, the --probe-coop mode, the coop trace item, and Monocypher, which only this layer used.

The old settings stay known as retired keys, so an nx2navi.ini that still sets them logs no unknown key, and they stay on the list of private settings, so a bug report keeps a room's secret, a relay's address and a name out. The platform layer's UDP sockets and fs_save_snapshot stay for the new co-op; cfg_ini_now and fs_profile_path, which nothing else called, are removed.

Checked: the game builds and starts, the menu shows its four tabs, --probe-cfg and --probe-fs pass, and the launcher's private-settings test passes. tests/save_share_check.py builds without its co-op stub; it cannot run from this worktree because the folder's path is longer than Windows allows, on main too.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-13 03:37:26 -05:00
chrg6
6a3c4d6ca2 Give replay_pipe its own row in the settings table again.
The comment added to the replay_workers row swallowed the replay_pipe row behind it on the same line, so every start stopped with "NX2NAVI_REPLAY_PIPE has no row in the settings table".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 03:05:00 -05:00
chrg6
2bbdb25de7 Add a text speed setting for the game's message windows on 1.1.1.
The patch set text_speed scales the typewriter speed of a message the game lets the player skip (fast, three times as
fast, its scripted waits as long) or runs the game's own skip on the first frame of each page (instant). Messages the
game marks unskippable, such as those that turn their page on a timer, keep the game's speed. The setting is live and
has a row on the Game tab in all four menu languages; with it at normal the set is off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 00:53:22 -05:00
chrg6
839afa32ac Add a test setting that runs DLSS or FSR 3.1 before the bloom instead of after the tonemap.
Frame dumps show the upscaler reads the bloom composite's output, which the game has already exposed, bloomed and
tonemapped to 0..1. With dlss_prebloom = 1 it runs at the bloom chain's first pass on the scene's linear light. Without
upscaling its picture goes back into the light target. With upscaling the lens flares and the bloom composite are
drawn at the picture's size and that picture replaces the game's upscaler's output. Off by default; with it off
nothing changes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 00:44:07 -05:00
chrg6
c6f2484ef9 Add Native (100%) to the Upscaling row: the scene drawn at the picture's own size with no upscaler.
The row writes scene_share = 1 with dlaa = 0, which the start already sized the render-target heap for; widescreen.c now
reads the share live, says when the heap needs a restart for it (the row's note and the Restart count), and logs the
scene size, the picture size and how the scene is scaled once the fixed share takes over and at each change. The
stand-in copies a scene of the picture's size texel for texel with a nearest sampler, and the performance overlay shows
Ocarina's real scene size instead of the other builds' placeholders. scene_share gets its settings row and its ini
text; the row's texts are in all four menu languages.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 00:43:03 -05:00
chrg6
f37d7fed6d Make replay_workers default to auto, which picks the count from the CPU's cores.
Auto gives half the physical cores less one, at most 6: 2 on 6 cores, 3 on 8 (the count measured best on an 8-core CPU), 5 on 12. Four cores or fewer get none, and so does AMD's Windows driver for RX 6000 and older, where a player's device was lost with workers on and the cause is not known. The menu's row lists Automatic first with the count it gives on this PC, and the log says how many were started and why.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 00:33:14 -05:00
chrg6
f2849c8b26 Merge main's tail_early, replay_small and Testing rows into the 0.10.0 line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

# Conflicts:
#	runtime/cfg.c
#	runtime/vk_exec_xfer.c
2026-11-13 00:26:53 -05:00
chrg6
08ad7402f7 Keep released textures by how long they went unused instead of by a small size bound.
A released texture now goes once nothing has used it for three minutes (six for content only the GPU made), measured
in wall seconds from a clock of the presents. In two players' sessions the game took released textures back within a
minute of the release or never, so the hold drops nothing it would ask for again. The size bound stays as the safety
net for a burst of area changes, and young textures may pass it, up to twice it, while the card and the system's
commit have room. vram_use defaults to low, which now means this hold; high turns it off and keeps the released
textures up to the bound as before, and balanced reads as low. The old low's values stay available as their own keys.
The reuse log line counts drops past the hold and splits its ages around it. tests/tex_release_check checks the rules
and the clock, and simulates sessions shaped by the logs against the old and new defaults.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 00:12:31 -05:00
chrg6
ef6efba7db Add a Video memory use row: Low, Balanced or High.
Balanced, the default, is what the earlier commits made the default. High keeps what DLSS, frame generation's
HUD-less picture, FSR 1 and SMAA made after they are switched off, as before them. Low also sets, for the keys the
player leaves unset: released textures keep at most 1 GiB (tex_released_mb), textures give way from 70% of the video
memory budget (tex_vram_pressure) and the shared pipeline list is built at first draw (pipe_seed_boot = 0). Unsampled
live textures are not dropped in any of them: that eviction left the ground see-through for good. The values come
after the device profile and the low-end mode (cfg.c VRAMLOW); the row is in the Screen tab under Texture detail and
takes effect after a restart. The architecture notes describe the new memory report lines.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 23:21:17 -05:00
chrg6
4f80dbcbc2 Bring the 0.10.0 line's low-end replay default into the pull request intake. 2026-11-12 23:04:56 -05:00
chrg6
d64a9b689c Move the sprint button's stance host off the water ripples' patch page slot, and fix how presses and timings reach it.
The stance site called page +0xf50, which the 0.10.0 line gives the water ripples above 60 fps: the second
registration ends every 1.1.1 start with "registered twice", the sprint button off included. It calls +0xf30 now, and
the comments say which slots the other sets hold. The set's switch is NX2NAVI_SPRINT_BUTTON_PATCH, not a name another
open request uses for a set of its own.

The stand-still timings count 60 Hz frames (frame_step_frames), so a toggled sprint no longer ends on a short stop at
high frame rates. A press is decided at its start for its whole length: kept from the game and the sprint's when it
begins in gameplay (B: while Link moves), else the game's alone, so a held B is not handed to the game half way and a
B that closes the pause menu starts no sprint. A sprint switched off with the button setting does not come back by
itself, Link's state is read only where the memory is readable, and the row, nx2navi.ini.example and the controls
page say that B is the jump under the game's Swap Jump Controls and name the button without assuming the layout.
tests\sprint_check.py covers the press latch, the menu press, 240 fps and the switch-off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 22:57:56 -05:00
kendo
54fa3bc0c7 Offer only L3 and the game's B button as sprint buttons, and name B as the Nintendo layout's bottom button. 2026-11-12 22:55:14 -05:00
kendo
6faf4bd7f5 Add a sprint button: a setting that makes Link sprint without rolling first, as a toggle or while held. 2026-11-12 22:54:58 -05:00
chrg6
f3856c8dca Ask for a reused compute request before its shader module is made, and report the reuse with the prebuild.
A compute warm request the same as one built before still made its shader module, with the SPIR-V fixes, pool rebind
and marks, before the reuse table answered; the table is now asked first, all of its key being known by then. The
table is cleared under its lock, the count of reused requests is in the prebuild's and the preparation's report
instead of a line at every autosave, and NX2NAVI_COMPUTE_WARM_REUSE is a known setting, so nx2navi.ini can set it
without an "unknown key" line.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 22:54:02 -05:00
Leyukaka
fe5bff8328 Keep the pipeline cache files under their limit when writing them, and set the limit from the RAM.
The limit was only checked when a file was read, all or nothing, so a run could write a file the next start then
dropped whole. On an RTX 5080 (0.9.2) pipeline-cache-play.bin reached 524.9 MB in one session and the next start began
empty; pipeline-cache.bin grows 14-28 MB at each fold and crosses 512 MB within a few sessions. Now a fold is made only
when its result fits, and a cache past the limit is not saved again, so the file keeps its last save under the limit.
Unset, the limit is the RAM / 32 between 512 and 4096 MB (512 on 16 GB as before, 2048 on 64 GB), which on that PC
took boot hits from 14 to 84 % and left no pipeline to background builds.

Taken into the 0.10.0 line with its conflicts resolved: the line had raised the limit to 1024 MB and says why in
the comment above cache_data_read, in nx2navi.ini.example and in AUDIT.md; those texts keep that reason and give the
RAM-based default, whose floor the next commit raises to match.
2026-11-12 22:50:53 -05:00
chrg6
de02ced989 Leave asynchronous replay off in the low-end GPU mode.
It can show a dark or flickering frame now and then, so the mode no longer turns it on with its other defaults. Its row under the mode's switch still turns it on for a player who wants it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 22:50:13 -05:00
chrg6
70c9935789 Give the movie timestamp sites a switch of their own, say what changes in a decoder stall, and keep the movie cap's reasons.
The two sites that count a movie's event frames from the shown picture's timestamp were part of the real-time step's
set, so the only way back to the old count also turned the step off. They are set omovie now, NX2NAVI_MOVIE_PTS
(movie_pts in nx2navi.ini), on by default.

The comment says what the new count changes at the default movie cap: nothing while the decoder keeps up; in a stall
the cues wait with the picture instead of going on with the soundtrack, and step by 2 or more when a picture is
dropped. The counter's reader, main+0x3b3ec10, hands it out as a float frame through a virtual call; its callers were
not traced, so whether a cue on a dropped picture's tick can be missed is said to be unknown, which is what the
switch is for.

The movie cap's comment keeps the measurements it rests on, the narration 2.4 times early and the fade at 65 s of 154
at 144 fps, with one sentence on the new sites. The new test is described in prose with what it does not cover,
instead of a row in the lifter's table.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 22:49:19 -05:00
chrg6
ec9dd522b1 Add texture compaction behind NX2NAVI_TEX_COMPACT, off by default.
With the setting on, textures no shader sampled for ten seconds are copied on the GPU out of the emptiest allocator
blocks into the holes of fuller ones, so the emptied blocks go back to the driver. A pass starts when the free space
inside the device-local blocks reaches NX2NAVI_TEX_COMPACT_MIN_MB (one block under VRAM pressure) and the block
table has blocks that hold nothing but such textures, with room elsewhere for what moves. It takes at most four
textures and NX2NAVI_TEX_COMPACT_FRAME_MB a frame, and none in a frame that loads an area, already made or uploaded
textures, or follows a long one. A released texture the size cap would drop is dropped instead of moved.

Only a texture whose image holds what the game's memory holds moves: uploaded, never written by the GPU, single
sampled, not depth. The entry takes the new image under the texture lock and its address generation moves, so every
slot, pool descriptor and memo resolves again. The old image and its views stay until the texture pool has taken
every set of its ring and the GPU is past the submissions recorded until then, as a retired texture's do.

Each pass logs what it moved and dropped, the blocks and bytes given back, and the time it took. A block emptied of
textures that the allocator keeps is left alone for ten minutes, and a pass that gave nothing back doubles the wait.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:33:29 -05:00
chrg6
f2a5800c1e Merge the stability pass's fixes for the points its review found.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>

# Conflicts:
#	runtime/cfg.c
2026-11-12 22:32:48 -05:00
chrg6
17aee6ea73 Link mesh pipelines from stage libraries like the vertex pipelines.
A mesh pipeline (task and mesh stages: the foliage, the grass, the terrain) had no stage libraries. Each new one was
a whole build, 0.2 to 1.1 s the first time foliage of a kind appeared, and its draws waited or were left out of the
picture until it was done.

Where the graphics pipeline library is on, a mesh pipeline is now linked at its first use from three libraries and
its whole build follows behind, as for a vertex pipeline. Its pre-rasterization library holds the task and mesh
stages and is keyed by both shaders. No vertex input library is linked: a mesh pipeline has no such state. Its layout
is a stage-independent pair, the mesh and task stages' bindings in set 0 and the fragment stage's in set 1, so the
fragment shader library can be the one a vertex pipeline uses. That library's key now also carries what a mesh
pipeline's fragment module gets filled in and whether the shading rate is dynamic state, which the pre-rasterization
and the fragment shader state both hold. The fragment output library is shared as it is.

The fast link on the library workers, the wait of a draw for its libraries and the pipeline hints take mesh pipelines
in. The summary counts them by themselves: fast links and their time, how long the ones a draw missed took to become
usable, and the libraries made for them.

NX2NAVI_GPL_MESH=0 (gpl_mesh in nx2navi.ini) keeps the whole build. It is also kept without the pipeline library, on
a device that draws no mesh pipeline, and where mesh pipelines alone are built without the driver's optimiser; the
start logs which is in use and why. The mesh emulation of the low-end GPU mode is not touched.

A mesh pipeline with libraries is another pipeline to the driver than the one built before, so an install's recorded
mesh pipelines are compiled once more at the first start with this change.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:31:11 -05:00
chrg6
2f30f1a2e5 Add the low latency setting and the module that drives the drivers' own modes.
NX2NAVI_LOW_LATENCY (0 off, 1 on, 2 on with boost; live) is for low latency without frame generation: NVIDIA's mode
through VK_NV_low_latency2 and AMD's through VK_AMD_anti_lag, each enabled on the device only where the driver lists
it, NVIDIA's with VK_KHR_present_id, which it needs, and AMD's with its feature. A device made by the DLSS Frame
Generation proxies gets neither: that path keeps its own low latency. vk_lowlat.c holds the calls, the frame numbering
and the statistics line; nothing calls into it yet beyond the start and the end of the device.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:29:59 -05:00
chrg6
df8431da7b Send the game's vibration values as they are to a Switch Pro Controller or Joy-Con, behind rumble_hd.
With NX2NAVI_RUMBLE_HD=1 (live, off by default) the gamepad the game reads, when it is a Switch Pro Controller, a
single Joy-Con or a pair of them, gets each side's low and high band with its own frequency and amplitude in the
controller's rumble report, and no dual-motor call any more. A Pro Controller and a single Joy-Con take the report
through SDL's effect call, over USB and Bluetooth; SDL refuses that call for a combined pair, so a pair's reports are
written to its two HID devices directly. Every other gamepad, the Switch 2 controllers included, keeps the motors.

The game's thread posts its newest values and a thread of input.c writes the reports: at most one every 15 ms
(rumble_hd_ms), a held value again every 30 ms, and the neutral value when the game stops sending for 250 ms, when
another gamepad takes over, when the setting is turned off and before the process ends. The rumble strength scales the
amplitude and rumble = 0 silences this path as well. With the setting off nothing is written to the controller: the
log line at the take names it by its ids, and the first report is the trial.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:28:36 -05:00
chrg6
96d656ba1d Time the staging allocation's wait for an upload batch, and say what the batch limit and the staging pool do now.
A staging buffer that does not fit the staging pool's blocks waits for the oldest upload batch with the upload lock
held, and a replay submission that sends its uploads waits for that lock. The wait cannot leave the lock: the caller
holds the open batch's command buffer and the buffer it asks for belongs to that batch. What the wait costs on an area
load was not measured anywhere, so it is timed and logged now: the first four waits, then at every doubling of their
count, with the total and the longest.

Since staging stays inside the pool's blocks every batch is submitted at 64 MiB of staging, so upload_batch_mb = 0 is
that limit and not "no limit", and the values above it (the low-end mode's 256, the menu's 128 to 1024) change
nothing; a discrete card keeps 256 MiB of staging for the run, not 128. The settings table, the menu's text,
nx2navi.ini.example, the audit's table and the comments say so.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:27:25 -05:00
chrg6
4a6ba66115 Tell a start that was closed or stopped during the boot's builds from a driver crash, and limit the whole warm.
A marker or a journal left by a start that died in the boot's builds was always read as a driver crash. Since the
whole warm those builds run for minutes, so a start ended from outside in that time (the task manager, a program that
stops the game, the power) switched the pipeline prebuild off for that driver for good, or put up to 32 variants on
the skip list that the driver had merely been building. Closing the window was already an orderly end and still is.

The crash handler now leaves a note while the boot's builds run. With the note the next start does what it did: it
skips the prebuild, or the variants the journal names. Without it the end is taken for a stopped start: the pipelines
are built again and the journal's variants are blamed on nothing. Three such ends in a row still skip the prebuild,
for a driver that ends the process without a fault the handler sees. The boot's journal has a file of its own, so the
preparation's keeps its meaning.

The whole warm waits prewarm_full_s seconds at most (600): when they are up the game starts, the builders step down
to the background's thread counts and priority, and the file says "done", so the boot screen has one turn per driver.

tests\boot_warm_check.py covers what a leftover marker means with and without the note.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:24:22 -05:00
chrg6
85089408f0 Merge main's replay workers default and menu row into the 0.10.0 line.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:06:04 -05:00
chrg6
264dbe42cc Merge the stability and memory pass into the 0.10.0 line.
Conflicts: the settings key lists and section maps take both sides' entries.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 21:49:17 -05:00
chrg6
1f5ee67f7e Give every skinned character motion vectors of its own, not the player alone.
A scene draw whose vertex shader reads a matrix palette and whose vertex layout feeds its joint inputs unsigned integers is drawn a second time into the motion vectors with last frame's blocks and camera, as the player's meshes are, with the same depth test and the same guard for bones that turn sharply. Which draw of last frame it continues is decided when the vectors are made, so the replay's threads cannot change it; a draw in doubt keeps the camera's motion. The player's own draws stay with their ownership records.

skin_motion (NX2NAVI_SKIN_MOTION) is 1 by default and 0 turns it off. The motion status line now counts the skinned draws seen, those drawn with their own motion and the others by reason. It has compiled and passed its checks; it has not been played.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 20:03:59 -05:00
chrg6
97c3bac3bd Keep a small buffer clear and the counter reports of the same record in the order of the stream.
A ClearBuffer or ReportValue is a fill the GPU makes where it stands in the stream, and guest memory has its bytes once the GPU got there. A counter report reaches guest memory as a CPU write after its submission's fence, and a render condition reads the record when it is replayed. So a report followed by a clear of the same record ended as the report (in one submission always, across two when the completion thread was behind the GPU), and a condition replayed after the clear read what memory held before the fill, or the 0 of the report the clear had overwritten.

A clear of at most 256 bytes into CPU-visible memory is now also applied at its place in the replay to the records it covers that a counter report went into: the covered bytes get the value in guest memory at once, reports replayed before the clear leave those bytes alone when their write comes, a condition reads them from memory, and a report replayed after the clear writes the whole record as before. The GPU's fill is recorded as before. Other small clears stay the GPU's fill alone: the GPU reads guest memory too, at once in an imported pool and through the next upload of the written page in a mirrored one, so a write ahead of it into a draw count or an atomic counter would reach passes that still want the old value. NX2NAVI_CLEAR_SMALL_CPU=0 turns it off.

Whether the game clears counter records is not known. The pass timing captures of 75 scripted runs show one buffer fill a frame and nothing else about it, and the frame dump does not list buffer fills. The periodic vk_usnap line now counts the small clears, the last one's size, value and address, how many covered a record with a report, the reports into bytes cleared before, and the report writes that left cleared bytes alone.

Checked with a build of the dev exe, the launcher tests, the device address table check, and a scratch link of vk_exec_xfer.c against stubs that replays reports and clears in both orders. Not run in the game.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 19:49:40 -05:00
chrg6
433cc62cce Leave the shared DLSS feature off until it has run on a card.
It was compiled and linked only, and in this game the dynamic resolution's steps may never change the scene's render size, so it has nothing to gain by default yet. dlss_range = 1 turns it on.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 19:43:57 -05:00
chrg6
8273d881a4 Run the smaller render sizes of a DLSS mode on that mode's feature, with the history kept.
Each render size had a DLSS feature of its own, so a step of dynamic resolution or a screen at another share cost a
feature creation and a new history. The feature created at the render size of the DLSS mode set now also takes every
smaller render size that DLSS reports for its output size and quality value (the optimal settings callback's dynamic
minimum), as the sub-rectangle of that frame's own images. A size above the feature's own, below the minimum, of
another shape or output size, or met under another mode still gets its own feature, and a refused evaluation turns the
sharing off for the run. The first frame of another size is still left out of the per-object motion pass and still
starts frame generation anew.

The setting is dlss_range (NX2NAVI_DLSS_RANGE), 1 by default: a run whose render size never changes creates and
evaluates its feature with the parameters it had, and adds one query after the creation. The log says for each feature
which render sizes it takes, and the status line counts the changes of size that kept the history against those that
made a feature. Compiled and linked only; no evaluation of a shared feature has run on a GPU.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 19:43:49 -05:00
epicmeme546
86131455ed Hand a group of draws too small to cut to one replay worker, whole, with replay_small.
With replay_pipe the submitting thread goes on past the groups its workers record. With NX2NAVI_REPLAY_SMALL=N a
group of N draws or more that is too small to cut into chunks goes to one worker as it is, and the submitting thread
goes on without taking the chunk itself. Off by default. The early tail now waits for groups still out before it
cuts the part, instead of giving the frame's tail up.

Kokiri Forest standing, RX 7900 XT, FSR 4, the early tail on, 5 workers, 4 groups out: about 700 draws a frame were in
such groups, 3.6 ms of the submitting thread; with 16 the replay took 10.2 instead of 11.0 ms and the frame rate was
63.2 against 62.2, 45.4 with everything off. The screenshots matched those with everything off, standing and
through warps to five areas.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 18:58:39 -05:00
epicmeme546
aec5e72051 Let the game go on while the GPU runs the end of the last frame, with tail_early = 1.
The game waits each frame until the GPU has finished the frame before. In Hyrule Field with FSR 4 the last of that
work is one part of 4.7 ms, the temporal upscaler and the interface drawn after it, then 1.4 ms of write-backs, and
what the game reads of the frame is done before the upscaler runs. With NX2NAVI_TAIL_EARLY the replay records that
tail into a command buffer of its own, and when it hands the CPU nothing but timestamps, writes no pool memory but
inline uniform updates of mirrored blocks and reads no guest memory late, the write-backs go to the queue before it
with the executed timeline's signal. The game's waits end there, and the GPU runs the tail while the next frame is
prepared. The GPU's commands are the same; a tail that fails a test goes as before. Off by default.

RX 7900 XT, Ryzen 7 5800X3D, 3440x1440, FSR 4 Native AA, one batch, replay workers off: 50.7 against 42.5 fps
standing and 56.0 against 45.9 along the field route; with FSR 3.1, 51.8 against 47.8 and 54.9 against 52.3. With
three replay workers, FSR 4, standing: 63.5 against 49.4. The screenshots matched those without it standing, along
the route and through warps to five areas, with no black frame outside the loading screens of both.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 17:41:47 -05:00
chrg6
bc256496cb Build task and mesh shader pipelines without the driver's optimiser on AMD's driver for RDNA 1 and 2, unless vk_noopt says otherwise.
That driver loses the device in play ("No fault detected", a timeout) on RX 6600 to RX 6950 XT cards in every version from 0.6.0 to 0.9.2, with the pipeline library on or off and the lazy write-back on or off (#591, #602, #659, #683, #684, #689, #635, #719, #279, and fourteen of twenty sessions in a player's launcher log of an RX 6800). Where the pass marks name a pass the GPU was in, twelve logs of five reporters, its first draw is a mesh pipeline: mesh shader ba4302f1 with fragment shader f64a96dd in nine, the one-draw pass of 1bbdb17e with 6cc3a476 in three. The five logs of 0.9.1 and 0.9.2 stop between the compute dispatch before such a pass and the pass. vk_noopt = mesh was there as a test switch for this suspicion and no reporter had run with it.

It is now what an unset vk_noopt means on that driver branch; every other driver keeps 0, and vk_noopt = 0 gives the optimised pipelines back. The picture is the same; the mesh and task shaders run slower, by how much is not measured, and those pipelines are built once more because the flag is part of the driver's cache key. That the optimiser is the cause is not shown: no AMD card ran this.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:31:56 -05:00
chrg6
641c866e8a Catch up after a stall of the audio renderer by rendering the owed frames without queueing them.
A frame that was not rendered when it was due stayed lost: the timer set its
deadline to now once it was more than 100 ms late, and the device-paced path
only filled the ring to its target again, so after every gap the sound was
heard that much later than the picture it belongs to.

Frames that are owed are now rendered and dropped: mixed in full, so the
voices, the effects and the sinks the game reads back advance, and not queued
for the device, whose queue is filled to the same target afterwards. While the
device paces, what is owed is the silence it played for want of frames,
counted in its own samples from an underrun until the prefill is queued again;
the wait for the first prefill and anything owed across a stop do not count.
On the timer a frame is owed when its deadline passed a whole frame ago. A gap
of more than 3 seconds is not caught up: the sound goes on from now.

NX2NAVI_AUDIO_CATCHUP=0 turns it off and keeps the old timing. The audio
statistics line counts the catch-up frames and the gaps that were too long,
and tests/audio_mixer_check.py checks the device's side of the accounting.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:17:48 -05:00
chrg6
42d16e7f0b Ramp a changed volume across the audio frame instead of applying it at once.
The mixer applied each voice's mix volume and each splitter destination's
volume to a whole 5 ms frame as one constant, so the level jumped at the
frame's first sample whenever the game moved a volume, which is heard as a
click. It now keeps what each voice and each splitter destination was mixed
with in the frame before and goes from there to the new value in equal steps
across the frame's samples, as the console's renderer does. An unchanged
volume stays on the constant path.

A voice that has just started, one that was silent in the frame before or was
moved to another mix or splitter, a destination that is new or was moved, and
the first frame after the renderer starts take the new volume at once.

NX2NAVI_AUDIO_RAMP=0 turns the ramps off. The audio statistics line counts the
render passes that ramped a volume. tests/audio_mixer_check.py builds the
mixer with the rest of the runtime stubbed and checks the ramps and the cases
that must not ramp.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:17:48 -05:00
chrg6
202fd47ceb Let the flight recorder dump on its own when one frame flashes.
With flight = 1 and its thumbnails kept, the recorder now also writes a dump when a frame's picture differs strongly from the frame before and the frame after while those two agree, which is what a one-frame flicker looks like. Each thumbnail is reduced to 16x9 cells of mean brightness where the present thread already sees it complete, and a frame is a flash when at least three cells are more than 24 of 255 brighter or darker than in both neighbours, the neighbours being alike in those cells, around them and over the picture as a whole. A camera cut, a fade, a pan and shapes crossing the picture are no flash, and a frame beside one without a thumbnail is not judged. The dump is the one F8 writes, named "flash" with the frame's number in its header line, at most one every 30 seconds. flight_flash = 0 turns it off; flight_flash_diff and flight_flash_cells set the two thresholds.

On the thumbnails of earlier dumps the defaults flag the frames whose scene was white once and nothing in the runs without that fault. tests/flight_flash_check.py checks the test itself on drawn pictures.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:16:30 -05:00
chrg6
95dc476ee7 Scale the scene with the edge-adaptive filter where the game's own upscaler ran.
The stand-in for the game's upscaler enlarged the scene with a linear filter, which is softer than the console's picture. It now enlarges with the edge-adaptive filter the present already scales to the window with: the same shader, built a second time with a constant set so it squares what it filtered, as the linear pass does. The stored square-root values are filtered as before and the decode is the same. standin_filter = bilinear brings the linear pass back, and the setting is live. The linear pass also stays where nothing is enlarged and while DLSS or FSR 3.1 runs, since that upscaler scales the scene itself and its picture goes over the stand-in's. The movies do not go through this pass and are not changed.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:16:18 -05:00
chrg6
823e0cdcd4 Raise the pipeline cache's size limit to 1024 MB, and leave never-drawn list pipelines to their first draw on a machine short of memory.
The limit was 512 MB, and a file over it starts the run empty until a play file replaces it. With the pipeline list of 0.9.1 one run builds more than that: on an RTX 2080 Ti (#722) pipeline-cache.bin held 551 MB and the play file the run then wrote 541 MB, so both were dropped at every start, 7,247 of 8,531 pipelines were built again each time (17 s of the boot) and 541 MB were written in every session. Seven of the players' logs read here have a file over 512 MB, five of them between 517 and 691 MB. At 1024 MB those are read, the play file is folded in once and the loop ends; a start that still finds both files over the limit now says so.

pipe_seed_boot (auto, 1, 0) decides whether the boot builds the pipelines of the shared list that the install has never drawn. Each is a pipeline the driver holds for the whole run: the boot's pipeline stage went from about 1.6 GB of commit on 0.8.0 to 3.9-4.4 GB on NVIDIA cards with the list (1.5-1.8 GB on AMD's driver), and 0.3-0.6 GiB of video memory. auto, the default, builds them as before except on a machine that starts with less commit free than the game takes in play, the start's own memory warning: there they are made at their first draw from the pipeline cache and recorded as the install's own. Mesh pipelines are built at boot either way. Compiled; not run in the game.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:13:40 -05:00
chrg6
495d118e9e Add an experiment that turns the game's occlusion queries off, off by default.
The new patch set occlusion_off makes six reads of two parameter bytes read 0: CreateZPrePassOcclusionQuery and CreateSamplesPassedQuery, where the game first writes their options and where an update compares and stores them. The game is then left without its occlusion queries, their reports and the conditional renders that depend on them, and draws what it would have tested: more draws, and no query results to wait for.

patch_occlusion_off = 1 turns it on at the next start. The key has a row in the settings table, which gives the set its default, a section and an entry in nx2navi.ini.example. What it costs and saves in play has not been measured.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:13:30 -05:00
chrg6
2818857d1b Show the middle 16:9 of a wider picture in the picture a save file keeps.
The game draws the whole picture into the 543x306 target of the save's picture, so a picture wider than 16:9 came out squeezed. The new set wide_save has one site in the viewport helper, where it loads the address of SetViewport: a viewport of exactly 0, 0, 543, 306 gets the patch page's two numbers added to its x and its width, without branches or flags. widescreen.c writes them for a picture wider than 16:9 and switches the set on only then; the scissor, set before, keeps the target's size.

C generated before the set existed keeps the other widescreen sets, and the log says that the save's picture is squeezed.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:13:19 -05:00