The textures of a loaded area are what fills a 6 GiB card: with the budget taken as 4,730 MiB a walk through Castle Town held 6,907 MiB of device memory, 4,302 MiB of it textures, 201 pools were refused their mirrors and the game ran at 20 fps. With texture_detail = reduced a mipmapped 2D or 2D-array ASTC texture of 256x256 and more that the game's CPU fills is made without its largest level, with low without its two largest when it is 1024x1024 or more. The same walk then held 5,472 MiB (textures 2,357) and 4,987 MiB (textures 1,997), and the ASTC texels decoded fell from 2,589 M to 826 M and 503 M. auto, the default, picks full from 8,192 MiB of device-local budget, low under 6,144 MiB and reduced between. full changes nothing.
The image holds the game's levels from the one it starts at (VkTexImage.skip), and the upload with its ASTC regions and BC3 encoding, WriteTexels, the write-back, the views and the sampler LOD clamp of combined bindings count from there. Render targets, storage images, 3D and cube textures, small and unmipped textures and textures the device samples as ASTC itself are left whole, as is a texture made over a live one that holds GPU-written content. A shader that fetches texels by position or uses a texture's size gets the texture whole: gfx_shader.c marks such bindings from the SPIR-V (the layer count of an array, which the translator's layer clamp asks for, does not count), and the replay makes a reduced texture bound there again with every level.
Not run on a card with 6 GiB: the figures come from an RTX 5090 with NX2NAVI_VRAM_BUDGET_MB=4730.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Every frame the render thread waited about 5 ms for the GPU after the frame's first submission, with the game
CPU-bound in every area. The wait is there so that the GPU has run that submission's passes before the game
rewrites what they read. But the submission also ends with the write-backs of what its shaders wrote, 60 MiB merged
into guest memory in 3 to 4 ms of GPU time, and the wait covered those too.
The write-backs now go into a part of their own. The part before them signals a second timeline, the executed
timeline, and the first-submission wait waits on that; the write-back part signals the timeline as before, so every
fence the game asks for still covers them, in the same queue order. wb_split = 0 keeps one part and the old wait.
Not measured in the game yet.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A profiled traversal session had 9 of its 16 worst hitches (100 to 500 ms) inside the render thread's shader lookup,
reading <key>.res.json and <key>.spv of shaders met for the first time: opening a loose file costs about 3 ms the first
time on Windows. get_async_one now reads in place while those reads stay within 1/8 of the wall time (2 ms at once);
past that three loader threads read them and the draws wait as for a translation. The perf line counts both.
The launcher's updates carry the shaders over and never packed the cache, which held 44,000 loose translations in the
test install. An update now packs it once it holds 1,000 loose ones, and the pack tool reads the loose files on 16
threads.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every shader cache key names the translator, so a release with a new translator had no cached translation at all:
the launcher re-translated about 42,000 programs before play, and play waited for any program not prepared.
The cache now lists the translator identities it holds translations of in shader-cache/identities.txt, newest first.
A shader the current translator has no translation of uses a previous one's, looked up with that identity mixed with
this machine's host options and read with the usual checks; it keeps that translation for the rest of the session, so
no pipeline is built twice. After the boot prewarm a background pass translates every stored input that has a previous
translator's entry again under the current one, on its own translator child at idle priority that waits while the
game translates. A program the new translator refuses keeps its old translation and is logged. Once the pass has gone
through every such input, the old entries of what it covered are dropped: loose files are deleted, and a pruned copy
of shader-cache.pack replaces the pack at the next start when the pack is still the one it was copied from.
--prepare-shaders still translates everything under the current translator. NX2NAVI_SHADER_CARRY=0 keeps the earlier
behaviour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game's ACES tonemap shader gets a GLSL function linked into its SPIR-V where it clamps each channel: the game's SDR result upgraded to the HDR range by luminance and mapped to the display with the RenoDRT curve, exposure, highlights, shadows, contrast, saturation, highlight saturation, blowout, flare and hue correction. The settings reach it as four vec4 the support buffer gains at 1440. The present encode is a port of the swap chain pass: gamma correction, gamut compression, the peak clamp and PQ. Without an HDR10 swapchain the shader gives the game's own SDR picture; native HDR is unchanged.
The menu offers Off, RenoDX and Native, with gamma correction, the tone mapper and its grading rows. The shader build compiles sources marked "keep functions" without optimisation so their functions survive for the splice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reflex's markers sat at the host present with frame numbers unlike the frame's tags, slReflexSleep was never called, and the low-latency mode was set before any swapchain existed, so it never applied. GfxBackend.frame_start, called from nvnWindowAcquireTexture, now sets the simulation and submit-start markers after Reflex's sleep (skipped once nothing was presented for 200 ms); submit end is set when the frame's submissions went out; the mode is set again after each swapchain (NX2NAVI_REFLEX: 1 on, 0 off, 2 boost); frames are numbered by the game's presents; and the fps counter counts what was shown. NX2SL_VERSION is 3, so nx2navi_dlssg.dll must be rebuilt. From a tester's fixes: 42-45 fps game, 84-90 on screen (was 24).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ocarina runs compute work on a second queue that trades results with the main one through events: the worker's command buffers wait (WaitEvent) for signals the main queue gives in its submission a few submits later, and the main queue waits for the worker's signals in turn. Replayed one submission after the other, the worker's steps ran before the work they wait for and read the previous frame's results, and the characters came out much too dark at any time of day (Kokiri Forest: about 13 waits a frame, 7 of them reached before their signal).
A top-level wait whose condition does not hold in replay order now stops its submission: the rest is held, with private copies of its recordings and the queue's state, and the queue's later submissions line up behind it. After each replayed signal the held work whose wait now holds goes on inside the command buffer being recorded, between full barriers, with its own state swapped in. Work still held after 36 submissions goes on regardless, as before (counted in the NX2NAVI_TRACE=perf line). The queue reaches the back end as gfx_submit_queue. Only with the replay on the submitting thread; NX2NAVI_EVENT_ORDER=0 turns it off.
Tested by play in adult Hyrule Field with the tree fix of the previous commit: Link lit normally at dusk and at noon, trees steady, lighting otherwise unchanged. The white specks in the grass remain (they predate both changes).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NX2NAVI_DUMP writes sh_<hash>.code next to sh_<hash>.spv: the guest program the shader was translated from, as its
stored inputs hold it, for a disassembler (a compute program as it is, a graphics stage after its 128-byte header).
NX2NAVI_SPV_OVERRIDE=<dir> runs <dir>/<hash>.spv in place of the compute shader whose SPIR-V has that hash, an edited
copy with the same interface, to look at a shader's intermediate values in a frame dump.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The install step seeded only 63% of the programs a play session met under their run-time code hash. A Switch 2 program with an empty c1 range past its code was hashed with that range, the Switch 2 agl and NDSR packages had no reader, and Layout2Shader/ was not walked. It now seeds 99.3% of the programs play asks for.
A default variant's answers are read again from its first translation (runtime/gfx_shader_guess.c): vertex inputs the shader reads as integers become uint, and a compute shader takes the texture and image types its translation declares. Task and mesh defaults carry the workgroup words play answers with. Against a play session's recorded variants, --prepare-shaders now matches 98.3%; the plain default guess matched 89.5%.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HDR is now a menu row: Off, Enhanced (the runtime's own HDR tonemap) or Native. Native reports an HDR10 display to
the game with the settings' peak and paper white; the game then renders its own HDR picture and presents it as PQ in
A2B10G10R10, which goes to the HDR10 swapchain as it is. The peak, game, HUD and (for Enhanced) hue rows follow it.
The build kit's link left out runtime/nx2navi.rc, so the game had no manifest and no icon: without per-monitor DPI
awareness, a 5120x2160 monitor at 150 % gave a 3413x1440 window that Windows stretched. It is compiled with windres
and linked again.
The movie decoder's frames are copied into the game's buffer by the host; the back end is now told of that write, so
the GPU's copy of the buffer does not keep older or empty bytes (green stripes in NV12).
A longjmp out of the game's JPEG decoder now logs the guest functions that called it, to trace a later crash.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A depth-compare read through a sampler whose compare is off now gets the slot's comparing sampler, as the Switch
compares there and only NVIDIA's driver did so on its own. Colour components a fragment shader does not write are
masked out, as Maxwell leaves them alone. Without mailbox presentation the swapchain takes relaxed FIFO, or
immediate, so a late frame no longer halves the frame rate. NX2NAVI_VK_NOOPT=1 builds pipelines without the
driver's optimiser, for a driver whose compiler fails on one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game used to start after at most 3 s of prewarm, so after a translator, GPU or driver change it met the rest of
its shaders in play and stalled on each one. It now waits for all of it: a warm start is ready in about half a second
and shows nothing, while a cold one shows a "Preparing shaders" screen in the menu's colours and the game's fonts, with
the shader and then the pipeline count and a bar. The shader and pipeline prewarm report their numbers every 100 ms.
The present path takes a frame without a game image for the screen. The RomFS opens on the first host-side read, so
the screen's fonts load before the guest's first file access. NX2NAVI_PREWARM_WAIT_MS now defaults to 0 (no cap). With
no progress for 60 s the game starts anyway and the prewarm finishes in the background.
Measured with an emptied cache: 2,988 shaders translated and 2,399 pipelines built in 9.4 s behind the screen, then
0 ms shader and pipeline waits in Kokiri Forest. Warm: the game starts 0.47 s after launch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Kokiri Forest drew black, in tiles and in shadowed and indoor areas, where shaders read light, probe and instance data through pointers they load from other buffers at an index (a phi of a pushed pointer and a loaded one, a pointer spilled to local memory): those reads returned 0. Translator patch 0030 keeps such accesses global, with a new first source naming the table, and the SPIR-V back end looks the address's 4 KiB page up in it and loads through the buffer device address it gives (PhysicalStorageBuffer64). runtime/vk_gpa.c keeps the table: two levels over the 40-bit GPU address space, page entries naming immutable records, records reused only after the GPU finished with them. Imported pools, their VRAM mirrors and the pages of virtual pools go in it; pools in it are destroyed after the submissions that may still read them. The last failing compute program needed MATCH.ALL (subgroupAllEqual) and the aggregated shared increment ATOMS.POPC.INC, now lowered in AmpereLowering.cs; Kokiri Forest translates without a failure.
NX2NAVI_GPA=0 turns the table off and NX2NAVI_GPA_EMPTY=1 keeps it empty. A first try synced every VRAM mirror at each table reader's draw, which overwrote what the GPU had written into them and made the black worse; mirrors sync only when bound.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Comments say what the code does and why, docs/maxwell.md keeps the Maxwell facts, and fetch_refs.sh clones only the checkout the build reads. Code is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The translator dropped 36113 global accesses per Kokiri boot (loads read 0, stores and atomics deleted); 837 remain.
AmpereLowering computes a predicated LEA's carry sum unconditionally, so a base like c[0][0x110] no longer reaches the
address as a phi; the edge AA's tile list is written and its blend weights follow the edges. Patch 0022 extends
GlobalToStorage: a constant-buffer base inside a sum of terms, and buffers reached through a pointer the program loads
from another storage buffer at a constant offset (the pointer tables Ocarina's vertex, pixel, mesh and compute shaders
read, also through register spills and phis). Such a buffer is listed with its outer buffer and offset, and the runtime
binds it at the address read from guest memory when the stage is bound (vk_exec_draw.c ptr_addr). The fog injection's
64x36x96 volumes now hold in-scattering.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The NVN2 front end and the SM86 to Maxwell shader lowering (tools/xlate/AmpereLowering.cs, mesh and task stages,
bindless texture pools, BRX jump tables, the NVN2 compute c0 layout) with four translator patches (0017-0020) bring the
opening of the game to 58-60 fps on the Vulkan renderer.
This round fixes the haze: SM86 IPA is lowered as a plain Maxwell IPA.PASS (texture coordinates were corrected for
perspective twice); LDSM, TXD, both F2IP byte forms, HMMA, MOVM and HFMA2.RELU are lowered and spill mode has eight
uniform register groups; conditional rendering keeps the newest counter report per address and treats a report as
pending until its value is in guest memory, so occlusion tests and the depth clears around the depth copy behave; and
the upscaler stand-in decodes the post pass's sRGB picture before writing the linear target. Tensor-core programs keep
the stand-in unless NX2NAVI_NATIVE_TENSOR=1, because their lowering does not match the hardware yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>