The Updates row promised that an update rebuilds the game "in a few
minutes". The code cannot keep that: a version that changes the lifter
compiles the game's code again, and one that changes what the shaders are
built with builds all of them into the driver's cache again. Players'
updates took 24, 34 and 45 minutes. The row now says it takes a few
minutes when little changed and half an hour or more otherwise.
The warm-up of the driver's cache after an update only builds, but its
count was drawn in the second half of the bar as in a full preparation,
so a 20 minute run read 50 % in its first second. Its count now fills the
whole bar, and the row says so while the shader cache is packed before it.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The default was off only on AMD's driver branch for RDNA 1 and 2, on the grounds that builds with the default on had been measured on an RX 7900 XT. Those measurements were standing in Hyrule Field and walking through a village; the report this is about is of a game that ended in fights, on an AMD card the player did not name, and fights are where the lazy path is busiest. Nobody has played one on an AMD card under our eyes on either branch, so the exception is now AMD's own driver as a whole (wb_lazy_choice.h, by VkDriverId), until a card of each branch has played fights with wb_lazy = 1 and a log to show. The cost is the open-area frame rate of 0.7.0 on every AMD card under Windows; the RX 7900 XT figures in the draft notes come from builds that had it on by default, which the notes now say. wb_lazy = 1 still turns it on.
--probe-vkdevice prints the line a fatal error or a crash adds to the log, so its wording can be read without a failing run. On an RTX 5090: "fatal: gpu NVIDIA GeForce RTX 5090, driver NVIDIA "621.01" version 621.1.0.0; memory mode mirror, lazy write-back on (the default on Windows (wb_lazy = 0 turns it off)); texture detail not chosen yet (no texture made)", and with the reporting player's nx2navi.ini beside the exe "lazy write-back off (wb_lazy = 0 is set)", after a start whose log names async_compute, vram_safe_mode and exception_handler as no settings of this version.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A step that runs drops the record of every step after it, and the RomFS
step comes before the lift although the lift reads only the unpacked
ExeFS. An install that was cut short while the image was still being
packed, the lift beside it already done, therefore lifted the whole game
again at the next try. The RomFS step now leaves the lift's record; the
compile and the shaders, which read the image, still follow it.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
compile_all wrote the object cache only when every file was done, so
Cancel or a crash in the middle of the compile lost the record of every
object and the next run compiled the whole game again. The cache now goes
to disk every 25 objects, at most every two seconds, moved into place
whole. Results are taken as the compiles end instead of in the order they
started: the largest file starts first, and in that order nothing was
recorded until it had finished.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A RomFS step that was cut short (Cancel, a full disk, a power cut) leaves
romfs.bin.part, up to 26 GB. The next run writes the image anew, but
make_game.py's step_romfs and the launcher's Begin Installation measured
the free space first, with that file counted as used: on a nearly full
disk the retry was refused although it needs no more room than the first
try. Both remove the file before they measure, and the first-run screen
counts its size as free.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
tests/wb_lazy_check.py took the compiler from tests/diff/common.py, which imports Unicorn and Capstone before anything else: on a PC without them the check stopped at the import, though it needs only a C compiler. It now picks the compiler as tests/gpa_check.py does.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A player wrote that the settings file is overwritten on updates and that a line has to be added again each time. Nothing an update of the launcher's install does writes the file: the updater works in the launcher's own folders, and the build only reads it (the bind_ lines for the button prompts, shader_carry for the shaders step). The tests now hold that with the player's file as reported: settings the menu wrote, three lines that are no settings of the game, a comment, CRLF line ends and no line end after the last line. It comes through the launcher's part of an update (staging, the switch, the cleanup; BackgroundUpdateTest), through the rebuild under a newer kit, a rebuild with nothing to do and a build from the game files again (MakeGameTest, with the check, the ExeFS, RomFS, shaders and prompts steps real and the lift and compile as stand-ins), and through the launcher's own settings switch, which adds its one line (PlayerIniTest).
One writer did write the whole file again: installer/ini.py, the older installer's last step at every install and update. It kept every line, but turned CRLF into LF, added a line end after the last line and dropped a byte order mark, and a file saved as UTF-16 stopped the step with an error. It now changes the lang line only and keeps every other byte; a UTF-16 file is read as that and written as UTF-8, as the game's menu writes it.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A player on an AMD card reported crashes in fights and that a line added to nx2navi.ini cured them. That line, async_compute = 1, is no setting of the game, and neither are two more in the same file; the one line of the file that changes how memory reaches the GPU is wb_lazy = 0. A second report, an RX 6600 on 0.7.1, lost its device 3.5 minutes into play with the lazy write-back on. Neither proves it the cause: the player changed several lines at once and sent no log, the RX 6600's last pass mark is inside a draw pass and not a fetch, cards with 8 GB lost their device the same way on NVIDIA before the lazy write-back existed, and reading the fault handler, the fetch, the arming and the buffers' lifetimes found no failure path. What depends on the driver and cannot be checked without the card: pages of guest memory are inaccessible while a host-pointer import of them is bound and written by the GPU, and Vulkan calls run inside the access-fault handler.
The default is now decided once the driver is known (wb_lazy_choice.h, vk_memory.c vk_mem_lazy_decide): on under Windows as before, except on AMD's driver branch for RDNA 1 and 2, which none of us has run it on; AMD's driver for RDNA 3 and newer keeps it on, since builds with that default were measured on an RX 7900 XT. What the player sets wins everywhere, and one line at start says the choice and its reason. On those cards open areas run at the 0.7.0 frame rate again (on an RTX 5090 that was 65 fps against 90 in Hyrule Field; not measured on AMD). tests/wb_lazy_check.c checks the choice by platform, driver and setting without a GPU.
For reports of this kind the log now holds what was missing. At start: every setting nx2navi.ini sets, and in one line the keys that are no settings of this version and do nothing; the settings menu shows those in its bottom row. At a fatal error or a crash: one line with the card, its driver, the memory mode, the lazy write-back with its reason, armed ranges, fetches so far and a fetch in progress, and the texture detail (dispatch.c rt_fatal_note_add, vk_device.c fatal_note), since a report is often the end of a log alone.
--probe-cfg loads the player's file: the three lines are named, and the menu's save keeps them and every other line it does not change byte for byte. Nothing here ran on an AMD card, and no fatal error was provoked to read the new line.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
start.pyw showed the import failure in a message box before it ended with
code 86, and the stub waits six seconds for that code: unless the player
closed the box in time, the broken version stayed the current one. When
app/previous.txt names another complete release, the failure now goes to
crash.log only and the process ends at once, so the stub rolls back and
the previous version says on its home screen which version did not start.
The box stays when there is nothing to go back to, when Steam started the
launcher without the stub, and when the stub's wait is already over.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
An update whose lift ran again drops the compile step's record before the
compile runs, so a compile that then stopped left state.json without it,
build.built_version said '' and the launcher's next start showed the
first-run screen and asked for the dump. build.installed now also counts a
folder that holds the exe of the build before and game files a rebuild can
start from: the window opens on home, where Rebuild the Game reads "Not
Finished" and Play says which build it starts, and an update's rebuild and
the command line's go on with the game. Begin Installation into a folder
whose game files are already unpacked builds on from them instead of
reading the dump again.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The limit was a thirty-second of the installed memory, 1 GiB on a PC with 32 GB whatever its card. The game lets go of the textures of what leaves the view and takes them back when it returns: walking through a village the released ones passed 1 GiB within two or three minutes, and from then on older ones were dropped and decoded again on their way back. The limit is now also a quarter of the card's budget where the PC has an eighth of its memory to match, up to 8 GiB; the video memory and commit pressure rules still drop released textures first.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The carry path of an update does not run the shader preparation: it runs --warm-shaders, which builds the listed pipelines from the seed-pipeline-keys.bin the game folder already has. make_game.py now writes that file from the kit's list first, so a newer list reaches an updated install. Its shader variants are not translated on this path; a record whose variant the folder has neither prepared nor met is left out and counted.
On a GPU that has no mesh shaders every mesh record failed with a log line each. They are counted in the step's line instead.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The preparation translates every shader and builds each one's stage library, so a pipeline a draw meets for the first time is linked in 2 to 6 ms. A mesh pipeline has no stage libraries: on an install that never drew it, it compiles whole in play, 0.2 to 1.1 s with its draws left out of the picture (18 of them on a first visit of Kokiri Forest). Whole pipelines were built ahead only from the folder's own pipeline-keys.bin.
tools/pipeline_list.py merge folds the pipeline-keys.bin and shader-answers.bin of game folders that were played into one list file: every key record once, with the answers record of each shader it names. A record names its shaders by input id, which depends on the game's code and the answers alone, and holds the game's pipeline state; what depends on the GPU is derived when the pipeline is built, so a record made on one machine is good on another with the same game version and runtime. Four folders on this PC give 5,432 records, 317 of them mesh pipelines (147 KB of keys).
tools/prepare_shaders.py reads the list (tools/data/pipeline_list.bin, data/pipeline_list.bin in a release folder, or --pipeline-list), adds its shader variants to the seed and writes its records as seed-pipeline-keys.bin. nx2navi.exe --prepare-shaders builds the mesh pipelines among them after the seed is translated and saves the pipeline cache before the stage libraries are built (NX2NAVI_PREPARE_PIPELINES=all builds the vertex pipelines too); --warm-shaders does it again after an update or a new driver, and --prepare-pipelines is that step alone. The pipelines go into the caches and are not kept or added to the folder's own key file, so they cost no start-up time or video memory until a draw meets them. A marker file keeps a driver that crashes on one of them from failing every preparation.
The list is derived from game data and stays out of the repository: check_content.py refuses files recorded from a game folder by their first bytes, and make_kit.py, make_launcher.py and make_release.py carry a list given with --pipeline-list. All three now also carry pipeline_list.py, which prepare_shaders.py imports.
Checked without the game: tests/pipeline_list_test.py, and prepare_shaders.py --no-run on the game files with a list of 317 mesh pipelines (all 266 shader variants found in this game version, 177 new to the seed). The build step in nx2navi.exe compiles and links and has not been run.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A draw whose pipeline is missing waits up to 3 ms for its fast link before it is skipped, 6 ms a frame in all. A mesh pipeline has no stage libraries and gets no fast link, so for the 0.2 to 1.1 s of its compile every frame that drew with it lost those milliseconds and skipped the draw all the same. Once such a pipeline has been building for longer than the 8 ms a cached one needs, its draws are skipped at once, as the one-shot mesh draws already are.
Not run in the game yet.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A game that stops before its first save is the one its player most wants to report, and Export Save refused it: "the game has no save yet". With Add Log and Settings on (the default) the launcher now writes NX2navi-log-<date>_<time>-bug-report.zip with the game's latest log, nx2navi.ini and a manifest that counts no save files, and says so on the Saves screen. Without a log there is still nothing to export, an export without the log and settings still needs a save, no account is made for the export, and an import refuses such a zip as one without a save.
This is the first of the two faults pull request #364 names, written anew inside the existing export; its Export Diagnostics screen and its separate crash log are not taken.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
While retired it got no use stamp, so it counted as idle the moment it came back, and a sweep over the video memory budget could evict it as idle in the same call that took it back: on the cards that are over budget, which are the ones the take-back is for.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A mark on a pool slot without an entry of its own went to the slot's own key, so a texture sampled only through a second descriptor at its address counted as unsampled, was retired after two minutes under memory pressure, and a mark on its stand-in could not take it back. Where the pool's syncs kept leaving slots behind, a retired texture was never destroyed either and its slots kept the stand-in: on a card with 6 GB the ground of the field was drawn without its textures and its height. The mark now goes to the textures the slot follows, and a retired texture that is not due after five seconds is taken back.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Each submission's first sync of the bindless texture pool walked every registered slot, 33,000 in Kokiri Forest, to find the few textures the CPU wrote and the few slots that changed. Three parts of that walk change, each with its own switch (pool_fast, pool_presnap, pool_group; on by default, 0 and ab accepted):
- The freshness check goes through a list of the entries the slots resolved to, with a check by 2 MiB region first; slots that resolved to nothing are looked up again when the game's memory map changes and every eighth submission. The use stamps the idle eviction reads are left from a count of the slots that hold each entry.
- The check takes the write-watch snapshots of its regions first, so unchanged entries pass the region test.
- The GPU-written slots of one address bucket with one descriptor form a group, which the dirty walk leaves alone while its first member is unchanged.
Measured on an RTX 5090 at 2560x1440, standing in Kokiri Forest, in-run A/B over five runs with all three switched (three of them with the barrier change switched too): 93.6 to 100.7, 96.4 to 103.1, 95.8 to 102.6, 99.3 to 107.1 and 91.9 to 99.9 frames a second, the replay thread 0.7 to 0.8 ms a frame shorter; a control's blocks differ by 0.4 %. On a walk with NX2NAVI_POOL_GROUP_CHECK=1 no group that was left alone had missed a write, and screenshots across the A and B blocks show the same picture.
From pull request #390. Not tried: the texture eviction under memory pressure (a 9 GiB budget was never reached on the walk), AMD and Intel drivers, Linux. One of the nine runs with it on ended by itself with exit code 0 and nothing in its log two seconds after the window lost the focus; three repeats of that run did not.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Every pass begin and every compute dispatch recorded a full barrier, which makes the GPU finish everything before each of them. With barrier_game = 1 (NX2NAVI_BARRIER_GAME) a pass after an earlier pass gets a barrier for its attachments only and a dispatch after other dispatches gets none; a change between drawing and compute keeps the full barrier, and so do the game's own barriers and the replay's copies, clears, fills and uniform updates. On an RTX 5090 at 2560x1440 the GPU's time for a frame fell from 5.4 to 4.9 ms standing in Kokiri Forest (two in-run A/B runs, the control's blocks differ by 0.7 %) and from 5.1 to 4.4 ms on a walk through it. The frame rate did not change there, because the replay thread is the limit on that machine; it should rise where the GPU is.
The default is 1 on NVIDIA graphics cards only, and 0 on every other vendor's: the game placed its barriers for an NVIDIA GPU, Vulkan asks for more of them than the game recorded, and no AMD or Intel driver has run this. 34 screenshots across the A and B blocks of one run show the same picture on NVIDIA. NX2NAVI_TRACE=perf logs the barriers a frame by kind.
From pull request #389, which had it on for every vendor; the default by vendor and the settings text are added here. The validation layer's synchronization check could not be run on this machine.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The new row, Add to Steam (Windows), puts a non-Steam shortcut named "The Legend of Zelda Ocarina of Time" into the shortcuts.vdf of every Steam account that signed in on the PC (launcher/steam.py): the binary key-value file is read and written back as it was, with ours added or updated in place, and the file from before the first change kept beside it. Steam reads that file only at its start and writes it back when it closes, so a running Steam is asked to close (-shutdown) and started again after.
The pictures come from the player's game when the row is selected (launcher/gameart.py), as the launcher's fonts and sounds do: Navi from the HUD's icon and its glow, the logo with the Master Sword and the Hylian Shield from the title screen's texture archive (decoded with runtime/tex_astc.c, built into a library with the toolchain's clang), and a frame 12 seconds into the first title movie, the field under the full moon, decoded from its AV1 with the toolchain's dav1d.exe, as the background, the cover and the wide tile. They go into config/grid named by the shortcut's id, CRC-32 of Exe and AppName with the top bit set, which matches the id Steam gave an existing shortcut on the test PC.
Steam starts the launcher's pythonw.exe on data/steam_play.pyw, which runs the launcher of app/current.txt with the new --play: the game starts from its folder with its console hidden, as Play starts it, and the process waits for it and for the copies its own Restart starts, so Steam counts the game as running while it is. ocarina.exe is a console program, so starting it directly would open a console window beside the game, and NX2navi.exe ends six seconds after it started the launcher. Started that way on an RX 7900 XT PC, the game ran, the Python process stayed until the game was closed and ended with code 0. Tested against copies of that PC's Steam files; the real Steam library is not changed until the player selects the row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Both are about the time between two frames. Ocarina waits for the previous frame's fence before it lets the next frame's GPU work start: its main thread signals an event from the CPU, and the main queue's commands begin with a wait for it.
The completion thread ran a submission's callbacks before it let the submission's waiters go, and the occlusion counts were among them: one vkGetQueryPoolResults and one vkResetQueryPool per reported query, about a hundred queries a frame in Hyrule Field. On an RX 7900 XT (26.10.1) each call goes into the kernel, 3.9 ms of every frame, so the fence was reached 4 to 6 ms after the GPU had finished with every game thread waiting. Slots come from the ring in order, so one call now reads up to 256 slots from the one asked for, the available results are kept for the segments that follow, and the slots taken are reset in runs (vk_exec_xfer.c oq_take, NX2NAVI_OQ_BATCH). Standing in Hyrule Field at 3440x1440 with FSR: 52.7 fps against 44.6, the longest frame of the measured minute 46 ms against 55; the completion thread spends 0.3 ms a frame in the callback.
When the CPU's signal came a millisecond or two after the main queue's submit call, the submission took its copies, stopped at the wait and was held; the render thread polled the event, presented, and the present replayed the frame under a value the game's fence does not stand for. The next frame then skipped its wait for the GPU and was replayed inside its submit call, and frames of 23 and 15 ms took turns. A submission that begins with a wait for an event the CPU has signalled before now waits for the signal in the submit call, before its copies are taken, 10 ms at most (vk_exec.c vk_exec_gate_wait, NX2NAVI_GATE_WAIT_MS): 54.5 fps and a longest frame of 33 ms in the same place, 58.6 fps with the recorder thread on. With a camera sweep the pictures went out 21.0 ms apart on average with a 99th percentile of 55 ms, against 25.4 and 64. A village went from 48.6 to 53.7 fps and a graveyard from 56.5 to 64.2. 900 consecutive frames of a still scene show no dark or changed frame, with the recorder thread and without.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A contributor traced the one-frame dark shadowing at the castle town gate to depth targets the game remakes at other sizes about a thousand times a minute: the new image started cleared, so everything near the camera read as in shadow for a frame. With depth_alias = 1 a depth-only image of the same format copies the live one's depth for the region both cover. Their three runs each way showed 6, 4 and 0 dark frames without it and none with it; the cost of the copies and other scenes are not measured yet, so it is off by default.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The window that shows a pick-up above the character counts its number up to the new total by a whole step a frame and closes once they are equal. The game rounds that step down, and below one 60 Hz frame per update it was 0: above 60 fps the window stayed until the area was left, and for larger amounts the counting sound was started again every frame. The step is now floored at 1, switchable with pickup_count.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The reports of black and white blocks on Navi, on Link next to her and on bright surfaces seen from inside a house come from RX 5000 and 6000 cards, whose Windows driver compiles with "AMD proprietary shader compiler" (vk_caps.amd_sc); an RX 7900 XT (LLPC) draws the same scenes clean. The game's shaders test for NaN with OpIsNan in 48,717 of an install's 54,959 translated modules, 26 tests each on average, and the translator's guard that keeps NaN out of every float colour output, so that one bad texel does not spread through blur and bloom into blocks, is such a test too. SignedZeroInfNanPreserve asks the driver to keep those tests; whether that compiler does is not known.
With that driver, vk_pipeline.c spirv_nan_bits now turns every 32-bit isnan, scalar or vector, into (bits & 0x7fffffff) > 0x7f800000 on the number's bits, and a float select with a constant whose bits are a NaN into a select of the bits (issue #156), when the module is created. NX2NAVI_VK_NAN_BITS=1 does it on every driver, 0 on none. Run over every module of an install's shader cache, the rewrite changed 1,281,675 tests and 57 selects with every output well formed (each id defined once, below the bound, the uint types declared once); --selftest checks it on a small module, and Link's house with it forced on (RX 7900 XT) draws as without it. Not yet tried on an RX 5000 or 6000 card.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After a lost device the driver's fault report gives an address and nothing says what was there. With va_report = 1 (NX2NAVI_VA_REPORT, off by default) the game keeps every address range the driver binds to a buffer or image and every range it unbinds (VK_EXT_device_address_binding_report, runtime/vk_vaddr.c). The report of a lost device then names the ranges that covered each faulting page, or the nearest ones when none did, and vaddr-history.txt beside the log holds the whole history, also when the driver gives no fault report. With 2 the call stack behind each range of 1 MiB or more is kept too. A player sees nothing of this unless the setting is on: without it no extension is enabled and no callback runs.
From pull request #349. Its second part, which stops a frame dump from turning on mesh query statistics, is left out: it changes what a dump writes for everyone who uses one. Built for Windows; no device was lost to try it.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
On Linux each Restart from the menu cost the next game one more processor core on machines with 12 or more logical processors. A process started with posix_spawn begins with the mask of the thread that spawned it, and since the recording thread has a core of its own no thread has every processor: the restarted game began without that core and took the next fast one for its own recording thread. plat_restart (runtime/platform/linux.c) now widens the calling thread's mask to all of the process's processors for the time of the spawn and puts it back. A mask set from outside is kept, helper programs started with plat_spawn are unchanged, and Windows is not touched.
From pull request #435, with its test tests/platform_restart_mask_test.c, which needs Linux. Not compiled or run here: this machine has no Linux compiler.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With the mouse camera in stick mode and a camera speed above 1, the mouse could never turn faster than a full stick does at camera speed 1, however high the mouse sensitivity was set. The mouse's counts were limited to full tilt first and divided by the camera speed afterwards, so at camera speed 1.5 the most the mouse could send was two thirds of full tilt, which the game's own factor brought back to the old top speed. The division now comes before the limit (runtime/input_map.c input_mouse_stick): a slow movement turns as far as before, and a fast flick reaches full tilt, which is the game's top speed with the camera speed in it. Direct mouse mode, the default, does not use this code. A camera speed of 1 or less behaves as before.
From pull request #424. tests/mouse_stick_check.py is new here: it builds input_map.c alone and checks the deflection at each camera speed without the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A player who keeps the game on a mapped network drive could not finish a build. Three things change in tools/make_game.py:
- The output folder keeps its drive letter on Windows. It was resolved to the share's UNC name, which is a second connection to the same server, and some servers drop that one under the compilers' load while the mapped drive stays up.
- When a source's size cannot be read because its folder stopped answering, the build says so and asks again for up to a minute before it stops with a message that names the drive. It used to end in a traceback. A file that is gone from a folder that answers still ends the build at once.
- A finished file is put in place through a temporary file beside it instead of a file in a temporary folder. Such a folder is made for its owner alone, and some shares refuse that while they take ordinary files; the build then reported a permissions fault in the output folder after everything had compiled.
From pull request #419: the first and third change are the contributor's, the wait is written again so that a file that is really gone does not wait a minute, and the launcher tests cover all three.
Co-Authored-By: Matthias <dev@sleepyyui.com>
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The AppImage tested for zbic with PYTHONPATH and the user's site-packages in view, then ran the build with Python's isolated mode, which sees neither. A player with zbic installed for their own Python of the same minor version passed the test, never got it installed where the build looks, and was told to run the pip command that had put it in the place the build ignores. The test now uses the same isolation and the same search path as the build, so zbic is installed into the AppImage's own folder whenever the build could not import it.
From pull request #436.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The developer build stopped at undefined dav1d symbols since the AV1 movie decoder (runtime/ov_movie2.c) came in: tools/make_game.py linked dav1d, tools/build_game.py did not. Windows links libdav1d.a statically, as libvpx and zstd are, so the exe imports no libdav1d DLL; Linux links -ldav1d. The llvm-mingw link list and the Linux release's static list get dav1d too, and docs/building.md lists the package for MSYS2 and Arch.
From pull request #439, with the two other link lists added.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A player's AppImage build of 0.7.1 stopped in its compile step after eight minutes of RomFS work: four
files did not compile, because the kit builds with the system's compiler and headers and theirs were
older than the runtime needs. vk_pipeline.c and vk_device.c name VK_KHR_pipeline_binary,
VK_KHR_dynamic_rendering_local_read and VK_KHR_shader_maximal_reconvergence, which their Vulkan headers
did not declare, and ui/menu.cpp takes its font in with #embed, which clang has from version 19.
- Vulkan headers: tools/vulkan_pin.py holds the release the other builds use (1.4.363, the archive and
hash tools/make_release_linux.py already pinned, which now reads them from there). The AppImage carries
its C headers in toolchain/vulkan-headers and builds against them whatever the system has; a kit or a
source checkout uses the system's when they are at least that release and fetches the pinned ones
otherwise (build_game.py vulkan_include). Their folder goes first on the include path of the runtime's
sources only, so the lifted code's objects keep their keys, and a runtime object compiled before
against the system's headers is taken over instead of compiled again. AppRun no longer asks for the
system's Vulkan headers.
- #embed: tools/build_shaders.py also writes the font's bytes as runtime/ui/roboto_ttf.h (ignored by git,
carried by a kit), and menu.cpp includes that where the compiler has no __has_embed. With #embed
nothing changes.
- Before its long steps a Linux build that will compile now checks every runtime source that needs no
header of the install with the compile step's own command (clang -fsyntax-only) and links an empty
program against the game's libraries (make_game.py preflight): an old compiler, an old header or a
missing development package stops it in the first seconds with the compiler's own errors. A failed
compile names every file that failed, not only the three whose errors it prints.
Checked on Windows: tests/launcher_test.py passes with four new tests (117); the header of bytes and
#embed give the same 162,588 bytes, and both branches of menu.cpp compile; the early check passes on the
Windows file set with clang 23 and stops on files made to fail; the 34 local headers of release 363 are
the upstream tag's files by git blob id. Not run: anything on Linux, the pinned archive's download, a
compiler older than 23.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The automatic levels assume the ASTC textures end as BC3. Decoded on the CPU or with the BC3 pass off they stay RGBA8 and take four times the memory, which is what one mip level left out gives back. A card with 8 GB that decoded on the CPU went 560 MiB over its budget and lost its device.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The result of that read was not checked. After a device loss the value was taken as it came, the callbacks of submissions that never ran were called as if their work were done, and the game went on recording until the next checked queue call failed. That was an upload's, so two players' reports read as an upload fault.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A font file registered with Windows stays open, so writing it failed with Permission denied. When the cached title font was registered but its family could not be used, every start tried to decode it again, failed on the locked file and kept the system font. The registration is now given up before the fonts are decoded again, and an unchanged file is not rewritten.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A crash inside a recorder's Vulkan layer read like a fault of the game: the report now says that the module is not part of the game and what to do. A lost device now logs the video memory in use against the driver's budget, so a report from a card with little memory shows whether the memory ran out.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Found in the first run of the previous two commits (a first visit of Kokiri Forest from a state that had only seen Hyrule Field):
- The count of frames a target was rendered in started again whenever the guest's texture object changed, and the game initializes its render target objects anew every frame at the same storage: the log showed `seen 2129/2128 in 1 frames`, so no target ever became steady and the rule did nothing. The owner of an image is now the storage address the texture cache keys it by. An image handed on to a texture elsewhere still starts at none.
- A one-shot mesh draw waited its 8 ms in every frame that met the same pipeline while it compiled for 150 to 1100 ms: 17 waits, 170 ms, every draw skipped at the end, up to four in one frame. A mesh pipeline that has been building for longer than that wait is a compile, and the draws after the first do not wait for it (vk_pipeline_building_ms).
- The last wait of a full-screen draw with no picture to hold was 40 ms a draw, and two such draws made 86 ms in one frame. It is 40 ms a frame now.
- A one-shot vertex draw skipped at the end of its wait gets its log line however short the wait was (seven were skipped with no line, so their targets could not be named).
That run against the same cell of the earlier comparison (same exe path, cache state, route and settings; one run each): the load's worst wait of the draws in one frame 99 ms against 735 ms, no mesh wait over 13 ms against 524 and 206 ms. Two long frames remain in both runs (628 and 862 ms here, 660 and 854 ms there): two compute pipelines built at their first dispatch, about 395 and 397 ms.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A session's log gave the counts of slow pipelines and slow frames but not what they were. Now:
- Each pipeline a draw missed that took 50 ms or longer to become usable gets a line (the first 48 of a run): mesh or vertex, fast-linked or built whole, whether pipeline-keys.bin named it, its shaders' input ids and where their translations came from (the shader cache, a previous translator's, or translated in this session). The summary line counts the same: how many were mesh pipelines, how many the key file named and the prebuild had not reached, how many had a shader translated in this session.
- Each shader library that took 25 ms or longer gets a line (the first 32): its shader, the translation's origin, and whether outputs were added for its fragment shader, which is a module the preparation never built.
- The count of draw lookups that "found shader libraries missing" says what it counts: a library not made in this process yet, not one the driver's cache lacks.
- After the boot prewarm one line says how many of the recorded pipelines' shaders are a previous translator's translations, beside the pipeline cache hits that show whether any pipeline was compiled again.
- The frame-time summary's "over 25 ms by cause" took the replay's whole time as one part, so every frame that waited for a pipeline, a translation or a texture upload inside the replay counted as "replay". The replay's part is now its time without those waits.
gfx_shader_origin gives a translation's origin.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A draw whose pipeline is still building is skipped when its pass is rendered every frame and waits otherwise, so that a lookup table or a volume generated once is not left empty. "Every frame" meant "in the last four frames", so after a loading screen or a full-screen menu every pass of the first frame read as new: each draw with a new pipeline waited on the replay thread, up to 30 s each, and a mesh draw, whose pipeline has no fast link, for its whole compile. A player's 0.7.1 log shows it at three area changes: frames of 954, 1015 and 684 ms with 853, 960 and 663 ms of pipeline wait, six mesh draws waiting 52 to 660 ms in passes whose targets had been rendered in thousands of frames.
The target history (now runtime/vk_target_frames.h) also counts the frames each target was rendered in, for as long as it is the same guest texture. From eight frames on its pass is per-frame however long ago the last one was, and its draws are skipped and built by the workers like any other (pipe_skip_steady, on by default). A target rendered for the first time still waits, now from one pool of 50 ms a presented frame that the full-screen draws share (pipe_frame_wait_ms; oneshot_budget = 0 gives the old wait back), a mesh draw 8 ms at most, and the wait for a one-shot draw's shader comes from the same pool (gfx_shader_await takes a limit). A full-screen draw with no picture left to hold waits 40 ms more instead of 500. One frame so waits under 100 ms for pipelines in all.
Every 600 frames with a miss the log says how many draws found a shader or pipeline missing, how long they held the replay thread in all and in the worst frame, by the kind of wait, and how many were skipped at its end.
tests/target_frames_check.py replays the area change of that log against the header. Not yet run in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The limit counted the frames on screen, so the game was paced at the limit over frame generation's multiplier: 60 at 4x drew 15 frames a second, and each step up of the multiplier took drawn frames away. Now a limit of 60 at 4x is 60 drawn and 240 shown. Only the display choice still counts the screen's frames, since a frame past the monitor's refresh is never seen, and with no limit set the default is 60 drawn rather than the monitor's rate.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A slot whose storage is unmapped has nothing to make, but with the creation budget at 0 the lookup noted it as left before asking whether its storage can be read. In a busy frame, once the frame's creation time was spent, about a thousand stale slots were noted at once, and the pool refresh took that for an area load: up to 274 times a minute in one session's log, each time lifting the count budget and the frame's creation time for the rest of the frame.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>