A session of 2026-11-13 met 46 pipelines late in adult Kokiri Forest (145 draws left out, mesh pipelines usable after up to 782 ms) and ended about 2 s later: the records waited for the optimised builds, and 23 of the 46 never reached the file, so the shared pipeline list folded from it would have missed them. A pipeline is now recorded as soon as a draw can use it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every RX 6000 loss whose pass marks named a pass was in one that starts with a native mesh draw, on every version from 0.6.0 to 0.9.2 and with every other setting tried each way; RDNA 1 cards on the same driver draw through the fallback and RDNA 3 and 4 on AMD's other driver draw natively, and neither has such a report. That the native mesh path is the cause is not shown. The decision moves into vk_mesh_path.h with a test of each device kind and setting; has_mesh_shader keeps saying what the hardware has, so the recorder thread and the low-end card test do not change. On those cards no native mesh pipeline is built any more: the seed list and the boot prewarm skip them. The early tail stays off with the fallback, a combination never measured. The fatal line names the mesh path, and NX2NAVI_VK_NOOPT's default applies with mesh_fallback = 0 alone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The shader memory cache held 777 MiB of SPIR-V for 7115 shaders for the whole session. A background thread now
compresses the SPIR-V of each shader no reader pinned for shader_compress_idle_s seconds (zstd level 1, 26% of the
bytes on the test install's 44,151 modules) and frees the plain copy; readers pin it through gfx_shader_spirv_pin and
get it decoded back. What the drawing thread compares at pipeline misses and draws, the module's FNV-1a and its Binding
decorations, is kept with the shader, so module_binding_missing, the water corrections and the DLSS, crumbs and skip
lists decode nothing. A compute pipeline created at a dispatch and a mesh shader's first pipeline key still decode on
that thread, and the memory report counts those decodes apart, with the SPIR-V as held against uncompressed and the
shaders held compressed. shader_compress = 0 keeps it plain.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every report adds a line for video memory outside VMA (the driver's usage and budget per heap against VMA's blocks, and counts of pipelines by kind and by last use, stage libraries, compute pipelines, layouts and descriptor pools, with the swapchain, DLSS and FSR sizes), a line that splits the process's commit by owner (the game's heap and maps, device-local memory, VMA's host blocks, the C runtime heap with the shader caches, pipeline tables, texture cache, log queue and flight recorder in it, the driver's pipeline cache data and the rest), and a line naming what grew by more than 64 MiB since the report before and since play began. Every ten minutes of play and at exit a ranking line orders the categories by growth and marks those that only climbed; tests/mem_growth_check.py checks that bookkeeping.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After an update that keeps the prepared shaders, --warm-shaders built all 42,000 of them into the graphics driver's
cache again: 10 to 20 s at every update on a player's PC while the driver gave every one back at once, and the full
build when it no longer had them (380 s there once, after a change of what they are built with). It now builds twelve
fragment libraries spread over the list first, into the driver's cache alone, as the game's check at every start
does, and builds the whole list only when fewer than three quarters of them came from that cache.
On copies of an install's caches (RTX 5090): with the driver's cache partly cold after a relink, 5 of 12 came from it
and the whole list was built (313 s); the run after it found 12 of 12 and built nothing more, the step taking 3 s.
lib_warm = force builds the whole list whatever the sample says.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the graphics pipeline library a draw's first pipeline is linked from stage libraries, and the optimised build
replaces it when ready. The fast link was kept until the process ended, so each pipeline a run drew held the driver
memory of two: one play session replaced 907 fast links while the video memory outside the allocator, where the
driver keeps compiled pipelines, grew by 491 MiB, and a 68,400-frame session grew it from 1,672 to 2,485 MiB.
The replaced fast link is now destroyed on the completion thread once the GPU is past the submission being recorded
and one after it. The draws read the pipeline from the cache entry each time they record and keep no handle past
their submission, so none can name the old one later. The gpl log line counts the fast links given back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A compute warm request the same as one built before still made its shader module, with the SPIR-V fixes, pool rebind
and marks, before the reuse table answered; the table is now asked first, all of its key being known by then. The
table is cleared under its lock, the count of reused requests is in the prebuild's and the preparation's report
instead of a line at every autosave, and NX2NAVI_COMPUTE_WARM_REUSE is a known setting, so nx2navi.ini can set it
without an "unknown key" line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Taken from pull request 760 and redone on the line's check: the sample was built at below-normal priority as the
guest started beside the boot's background builds, and on an RTX 5080 (0.9.2) it read a warm cache as cold, a median
of 136 ms, after which 42,231 libraries were built again in 873 s although the driver had them. The sample is now built
at normal priority and into the driver's cache only, as the warm's workers build (a library our own pipeline cache
holds read fast whatever the driver had), and a sample that says cold is taken again 10 s later, except while the start
waits for the whole warm after a driver change, where cold is the expected answer. The thread goes back to below
normal afterwards only when the game runs beside it.
Two parts of the pull request are not taken. The third fastest of twelve called a cache warm when three libraries
were in it, which is the partly evicted cache the warm is for; the cache counts as warm when three quarters of the
sample are fast. A resumed warm was sampled and stamped done when it looked fast, which a warm cut off past a quarter
of the list would pass with the rest never built; it is not sampled, and goes on from the variant the earlier run
reached, which shader-warm.txt now keeps every 8,000 variants, instead of from the first variant again: the cause of
the warm at every start the pull request saw with sessions shorter than a warm.
Co-Authored-By: Leyukaka <45659323+Leyukaka@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The RAM-based default gave 509 MB on a 16 GB machine, below the about 550 MB a full cache of the pipeline list reaches
on an NVIDIA card: with the limit kept on the write side the files would stop there and every pipeline past it would
compile again at every start, on the most common RAM size. The default is now RAM / 32 between 1024 and 4096 MB.
A fold was taken when the merged cache fitted the limit at the boot, but pipeline-cache.bin is written at the first
autosave, after the boot's builds have added to it. Past the limit that save was refused while the play file was
written over with the new run's pipelines, and what had been folded from it in memory was then in neither file. The
fold now needs a play file's worth of room (pipeline_cache_play_mb) under the limit, and the play file is not written
while a fold is not yet in pipeline-cache.bin.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The limit was only checked when a file was read, all or nothing, so a run could write a file the next start then
dropped whole. On an RTX 5080 (0.9.2) pipeline-cache-play.bin reached 524.9 MB in one session and the next start began
empty; pipeline-cache.bin grows 14-28 MB at each fold and crosses 512 MB within a few sessions. Now a fold is made only
when its result fits, and a cache past the limit is not saved again, so the file keeps its last save under the limit.
Unset, the limit is the RAM / 32 between 512 and 4096 MB (512 on 16 GB as before, 2048 on 64 GB), which on that PC
took boot hits from 14 to 84 % and left no pipeline to background builds.
Taken into the 0.10.0 line with its conflicts resolved: the line had raised the limit to 1024 MB and says why in
the comment above cache_data_read, in nx2navi.ini.example and in AUDIT.md; those texts keep that reason and give the
RAM-based default, whose floor the next commit raises to match.
After an update the game keeps the previous translator's translations until a background pass translates them again. Those still declare texture pool arrays of 32768, which spirv_pool_rebind no longer took for pool arrays once VK_POOL_TEX grew, so their textures were never bound and areas loaded with empty images. They now bind to the first 32768 entries of the larger binding.
The preparation and the boot build the stage libraries of single shaders. A mesh pipeline's pre-rasterization
library needs its mesh stage and its task stage together, and its fragment shader library depends on what that mesh
stage leaves unwritten, so only a pipeline record names what they are made of.
Every listed mesh pipeline the preparation builds and every recorded one the boot queues now notes its two shader
libraries, each key once. The preparation builds them on every core after the listed pipelines and before the
pipeline cache is saved, inside the marker that covers a driver dying on a listed pipeline. The boot builds them on
one thread at idle priority beside the game, behind the memory gate, with the rest of the library prebuild
(lib_prebuild = 0 leaves it out). Each is destroyed once built, which leaves it in the pipeline caches and the
driver's own, as for the single shaders' libraries.
A mesh pipeline of known stages that a draw meets with other targets, another blend state or sample count then finds
its libraries in the caches and is linked, where it was compiled whole. The recorded and listed mesh pipelines are
still built whole ahead of play, also on a machine that leaves the rest of the shared list to its first draw.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A mesh pipeline (task and mesh stages: the foliage, the grass, the terrain) had no stage libraries. Each new one was
a whole build, 0.2 to 1.1 s the first time foliage of a kind appeared, and its draws waited or were left out of the
picture until it was done.
Where the graphics pipeline library is on, a mesh pipeline is now linked at its first use from three libraries and
its whole build follows behind, as for a vertex pipeline. Its pre-rasterization library holds the task and mesh
stages and is keyed by both shaders. No vertex input library is linked: a mesh pipeline has no such state. Its layout
is a stage-independent pair, the mesh and task stages' bindings in set 0 and the fragment stage's in set 1, so the
fragment shader library can be the one a vertex pipeline uses. That library's key now also carries what a mesh
pipeline's fragment module gets filled in and whether the shading rate is dynamic state, which the pre-rasterization
and the fragment shader state both hold. The fragment output library is shared as it is.
The fast link on the library workers, the wait of a draw for its libraries and the pipeline hints take mesh pipelines
in. The summary counts them by themselves: fast links and their time, how long the ones a draw missed took to become
usable, and the libraries made for them.
NX2NAVI_GPL_MESH=0 (gpl_mesh in nx2navi.ini) keeps the whole build. It is also kept without the pipeline library, on
a device that draws no mesh pipeline, and where mesh pipelines alone are built without the driver's optimiser; the
start logs which is in use and why. The mesh emulation of the low-end GPU mode is not touched.
A mesh pipeline with libraries is another pipeline to the driver than the one built before, so an install's recorded
mesh pipelines are compiled once more at the first start with this change.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With the warm's time limit the line that promised a wait for all of them was wrong when the limit ended it first.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A marker or a journal left by a start that died in the boot's builds was always read as a driver crash. Since the
whole warm those builds run for minutes, so a start ended from outside in that time (the task manager, a program that
stops the game, the power) switched the pipeline prebuild off for that driver for good, or put up to 32 variants on
the skip list that the driver had merely been building. Closing the window was already an orderly end and still is.
The crash handler now leaves a note while the boot's builds run. With the note the next start does what it did: it
skips the prebuild, or the variants the journal names. Without it the end is taken for a stopped start: the pipelines
are built again and the journal's variants are blamed on nothing. Three such ends in a row still skip the prebuild,
for a driver that ends the process without a fault the handler sees. The boot's journal has a file of its own, so the
preparation's keeps its meaning.
The whole warm waits prewarm_full_s seconds at most (600): when they are up the game starts, the builders step down
to the background's thread counts and priority, and the file says "done", so the boot screen has one turn per driver.
tests\boot_warm_check.py covers what a leftover marker means with and without the note.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A start that finds the pipeline cache written by another device or driver has nothing built, and everything was
compiled beside the game: an 8-core integrated GPU drew fewer than 600 frames in its first 11 minutes. Such a start
now waits on the "Preparing shaders" screen, with counts, for every recorded pipeline, for the compute pipelines on
every core at normal priority, and, when a sample says the driver's own cache lacks the prepared stage libraries, for
all of them on every core. The memory gate still holds for the builds, and the library builds write the preparation's
journal while the start waits, so a variant the driver's compiler dies on is skipped from the next start on.
boot-warm-owed.txt beside the caches names the GPU and driver: a start closed during the warm is followed by one that
goes on with it, three at most, and "done" keeps later starts ordinary while the cache file still carries the earlier
driver's header. When the boot stops waiting (prewarm_wait_ms, or a minute without progress) the builders step down
to the background's thread counts and idle priority. prewarm_full = 0 turns the warm off.
With nothing in the driver's cache the probe took 425 s on an RTX 5090 with 16 CPU threads: 87 s for 5,775 recorded
pipelines, 19 s for 4,075 compute pipelines and 317 s for 42,231 prepared variants.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
After a driver update pipeline-cache.bin is dropped and every recorded pipeline is built from nothing. With the pipeline library the boot waited 20 s and left the rest to be built beside the game. In a player's log of an 8-core integrated Radeon that was 2,141 of 8,122 pipelines, finished 296 s after the start, with the 42,231 prepared variants being built behind them: the game drew fewer than 600 frames in its first 11 minutes, which reads as a freeze. A start that finds such a file now waits for all recorded pipelines, with their count on the boot screen, as a start without the library does; NX2NAVI_PREWARM_FULL=0 keeps the 20 s. The prepared variants still follow in the background. Checked with --probe-prewarm on a cache copy whose header names another device: the line is logged and all 5,775 pipelines are built before the stage ends.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
That driver loses the device in play ("No fault detected", a timeout) on RX 6600 to RX 6950 XT cards in every version from 0.6.0 to 0.9.2, with the pipeline library on or off and the lazy write-back on or off (#591, #602, #659, #683, #684, #689, #635, #719, #279, and fourteen of twenty sessions in a player's launcher log of an RX 6800). Where the pass marks name a pass the GPU was in, twelve logs of five reporters, its first draw is a mesh pipeline: mesh shader ba4302f1 with fragment shader f64a96dd in nine, the one-draw pass of 1bbdb17e with 6cc3a476 in three. The five logs of 0.9.1 and 0.9.2 stop between the compute dispatch before such a pass and the pass. vk_noopt = mesh was there as a test switch for this suspicion and no reporter had run with it.
It is now what an unset vk_noopt means on that driver branch; every other driver keeps 0, and vk_noopt = 0 gives the optimised pipelines back. The picture is the same; the mesh and task shaders run slower, by how much is not measured, and those pipelines are built once more because the flag is part of the driver's cache key. That the optimiser is the cause is not shown: no AMD card ran this.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The limit was 512 MB, and a file over it starts the run empty until a play file replaces it. With the pipeline list of 0.9.1 one run builds more than that: on an RTX 2080 Ti (#722) pipeline-cache.bin held 551 MB and the play file the run then wrote 541 MB, so both were dropped at every start, 7,247 of 8,531 pipelines were built again each time (17 s of the boot) and 541 MB were written in every session. Seven of the players' logs read here have a file over 512 MB, five of them between 517 and 691 MB. At 1024 MB those are read, the play file is folded in once and the loop ends; a start that still finds both files over the limit now says so.
pipe_seed_boot (auto, 1, 0) decides whether the boot builds the pipelines of the shared list that the install has never drawn. Each is a pipeline the driver holds for the whole run: the boot's pipeline stage went from about 1.6 GB of commit on 0.8.0 to 3.9-4.4 GB on NVIDIA cards with the list (1.5-1.8 GB on AMD's driver), and 0.3-0.6 GiB of video memory. auto, the default, builds them as before except on a machine that starts with less commit free than the game takes in play, the start's own memory warning: there they are made at their first draw from the pipeline cache and recorded as the install's own. Mesh pipelines are built at boot either way. Compiled; not run in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Mesh shaders as compute, the texture that gets memory of its own, staged mirror uploads and the shorter wait for the GPU, widened write-watch queries, the video memory limits and reserve, early upload batches, the asynchronous replay, the hot-pool rule and the recording thread on AMD cards without mesh shaders were measured on a Radeon RX 580 and run on no other card. Each keeps what 0.9.1 did unless the key or its own setting says otherwise; the key gives the defaults the way the device profile does. The notes describe them as that option, hold main's two new entries in one Changed section, and list the white edges in towns as a known issue.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Conflicts: the settings key lists take both sides; frame generation keeps the camera-cut handling and logs its counters every 600 frames with the cuts among them; the pass-time mark moves into draw_viewport; mo_desc keeps the pose depth and notes the reader.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
On a GPU without mesh shaders the boot prewarm dropped every recorded mesh pipeline, also with the mesh
emulation, which builds them as a vertex pipeline plus compute stages (pipe_miss: layout_get_emu). Each was
then built at its first draw, 113-830 ms on an RX 580 (22 of the 48 pipelines missed entering Kokiri Forest on
0.9.1), and the draws waiting for it were skipped: frames held back or shown without them. With
NX2NAVI_MESH_EMULATION on they are built by the prewarm like the others.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A draw of an emulated mesh pipeline looked its entry up under the lock the build held across the driver's compile of
both stages: on a first run every such draw waited for whatever entry was being built, 2.5 s of the replay thread in
Kokiri Forest on an RX 580. Entries are now published complete at the head of one of 256 buckets and read without a lock.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On AMD's driver for Polaris (RX 580, 23.10) a store between a pool texture's access chain and its sample left the
quad's helper lanes out of the code in between: derivatives at a triangle's edge were garbage and edge pixels came out
dark, the dotted lines along the paths' triangles since 0.7.0 (frame dump f1714: the colour pass covers every pixel,
the depth test is not what drops them). Each access now notes its slot in a Private variable; before each return of
the entry function and before a kill, terminate or demote every noted slot is marked, an unset one going to a spare
slot past the pool. Accesses in loops or outside the entry function note theirs in a ring of 8, marked in a loop at
the way out. Checked with spirv-val on the 45 marked shaders of the dump.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The generated vertex shader wrote one vector per location. A fragment shader that packs two inputs into one location
(Component decorations: a vec2 at component 0 and another at component 2) then had nothing matching its second input,
whose value is undefined: wrong colours on the emulated foliage. The vertex shader now declares an output for every
input variable of the fragment shader, with its Location, Component, type and Flat, filled from those components of
the mesh stage's vector at that location (zero where the mesh stage writes none).
(cherry picked from commit c38eb31889314ebfb164ff9dffad5796eba46ed4)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The 8 point-list mesh programs of Ocarina 1.1.1 (32 points, position and point size) were left unemulated. Their
indices are single uints and the point size goes to an extra vertex slot, which the generated vertex shader writes to
PointSize; the draw asks for a point list (the pipeline key's topology class follows the draw's primitive for mesh
draws), chosen from the mesh stage's OutputPoints. A mesh draw from a nonzero first workgroup is drawn from 0 as
before, now with a warning in the emulated path too. All 1016 programs convert and pass spirv-val.
(cherry picked from commit 8900aeaffa3264e4cc655ffd487cb2d2f3e3dd17)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Without the extension every mesh draw was skipped ("mesh draws need VK_EXT_mesh_shader: skipped"): on an RX 580 the
game's grass and foliage were missing. The translator already builds each task and mesh program as compute code that
MeshSpirv.cs wraps into TaskEXT / MeshEXT modules; runtime/mesh_emu_spirv.c turns those modules into GLCompute ones:
outputs and payload move to workgroup memory, SetMeshOutputsEXT's counts are kept, and the entry function's end
reserves vertex slots and indices in an arena with atomics and copies the vertices and triangles out (task: the payload
and the mesh group count go to a task record, and the mesh dispatch to the draw record). A generated vertex shader
reads the vertices back for the game's fragment shader. Checked with spirv-val (Vulkan 1.3) on the 1016 task and mesh
programs of Ocarina of Time 1.1.1: 1008 convert and validate; the 8 point-list meshes stay unemulated.
vk_pipeline.c gives an emulated mesh pipeline a layout whose task and mesh bindings are visible to compute, with push
constants and a compute-side descriptor template, builds the generated vertex shader's graphics pipeline and the two
compute pipelines; vk_exec_draw.c prepares each mesh draw as before, then outside the pass zeroes the arena counters
(first emulated draw of a submission), fills a draw record, pushes the same descriptors to the compute bind point,
dispatches the task and mesh stages (direct, or from the indirect ring entry) and draws DrawIndexedIndirect from the
record. mesh_emulation = 1 turns it on; mesh_emu_mb sizes the arena (160 MiB).
(cherry picked from commit efc43b177694d8f8ce5700fcf28d80e889a45589)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game's line width was dropped at the call and every line drawn 1 pixel wide; the game draws two lines a frame at 4.5 pixels into a 144x144 mask. The width is now recorded with the draw state and set as dynamic state for draws of the line topology class, held to the device's range. Only pipelines of that class list the new dynamic state, so the others keep their entries in the pipeline caches and the driver's. line_width = 0 draws every line 1 pixel wide as before.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The coordinate pair and the absorption guard needed modules made on each PC by tools/projective_recipe.py and a folder named in NX2NAVI_SPV_OVERRIDE, so no player had them. runtime/spirv_water.c makes the recipe's edits on the translation in memory, in the recipe's order: on the NVIDIA profile its three modules are byte for byte the recipe's (RTX 5090, game 1.1.1). vk_pipeline.c keeps the edited modules in a small table, made at first use, and builds a pair from them only when both of its stages were made; a module of another shape is built as it is, with a log line. NX2NAVI_WATER_PROJECTIVE=0 turns the corrections off. tests/water_projective_check.py compares the runtime's edits with the recipe's on made-up modules.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The paired modules were looked up by the hash of the module as built, so a vertex module that had outputs added for its union (which differs from one install to the next) or a fragment module changed for dual-source blending ended the run. The vertex replacement now stands for the translation itself and takes the added outputs as any module does; a pair with dual-source factors is built from its original modules in both stages.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Add the exact-material nonnegative distance guard and the recorded NVIDIA translation profiles. Keep generated shaders and the private native patcher out of the repository. Document reported cross-vendor testing and the unresolved origin of invalid absorption distance.
Carry clip coordinates through perspective interpolation for the identified water shader pair. Keep generated modules private and document the observed results and remaining portability limits.
A new install met every pipeline in play: in Hyrule Field one 600-frame stretch of a first visit had 1,769 draws wait 461 ms in all for pipelines, the longest frame 88 ms. The boot now reads seed-pipeline-keys.bin, the release's list, as recorded pipelines after the install's own (keys_open_seed, NX2NAVI_PIPE_SEED, default 1): their pairs go into the vertex output unions and the prewarm builds them as it builds the install's. The preparation builds every listed pipeline (NX2NAVI_PREPARE_PIPELINES now defaults to all), with the unions of the same list, so the first boot of a new install finds them in the caches. The list's mesh pipelines are left out at the boot on a GPU without mesh shaders, as the preparation leaves them out. Nothing of the list goes into pipeline-keys.bin.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A mesh pipeline whose fragment stage reads a location the mesh program never writes now gets a fragment module where
that input is a private variable set to (0, 0, 0, 1) at entry, or to (s, t, 0, 1) of gl_PointCoord when the mesh
program draws points. The fragment shaders recorded with two of the game's point-drawing mesh programs read location
5, which those programs never write; Vulkan leaves such an input undefined.
Checks: tests/fs_fill_inputs_check.py passes; 237 recorded fragment modules rewritten offline pass spirv-val; a
60 s Kakariko run with the change shows the area as before with no Vulkan errors.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
AMD's Windows driver answers VK_ERROR_UNKNOWN for some pipelines its compiler gives up on, and the draws that need
such a pipeline were left out for good. create_graphics now tries once more with VK_PIPELINE_CREATE_DISABLE_OPTIMIZATION_BIT
(slower shaders for that pipeline instead of a missing draw) and logs the first such retry. NX2NAVI_VK_NOOPT gains a
value, mesh: only pipelines with task and mesh stages, the foliage's, are built without the optimiser, whose
optimisation is a suspect in device losses some minutes into a forest on AMD GPUs; with it a report can be narrowed
without slowing every pipeline.
Checked: the runtime compiles. A 60 s run with VK_NOOPT=mesh on an RTX GPU logs the mesh-only line, has no error and
the same GPU time as the default (4.09 ms a frame against 4.09), 134.5 fps. The retry cannot be triggered on this
GPU.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The boot's prewarm and the shared list's preparation started a builder on every core at once, so the driver began
that many graphics pipelines at the same moment, its first ones of the run among them. NVIDIA's 621.14 was reported to
fault in a sizable share of starts that way; a driver's first graphics pipeline sets up its compiler. warm_builder
now takes a one-job mode, and both callers build one queued pipeline on the starting thread before they start the
others.
Checked on an RTX GPU with --probe-prewarm in a copy of a dev folder (its prewarm skip marker removed), twice each with
the baseline and this build, alternating: no fault in four runs. With the 20 s budget the first pass built 2,203 of
3,226 recorded pipelines before and 2,135 after; the second pass built all 3,226 in both. A fault rate of a few
percent cannot be shown in four runs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NX2NAVI_PREPARE_PIPELINES=mesh, the default, builds only the list's mesh pipelines, because a vertex pipeline is
fast-linked from its stage libraries in a few milliseconds and its vertex module depends on the output union this
install has recorded. Neither holds where the library is off (vk_caps_gpl: AMD's Windows driver for RDNA 2 and older,
or gpl = 0): a vertex pipeline a draw misses is compiled whole while that draw is left out, and its vertex outputs come
from its own fragment shader, since independent layouts need the library, so the listed pipeline is the one the draw
asks for. There mesh now builds every record, and the summary line says so.
Checked: all runtime files compile. Not run: no install on this PC holds the shared list, and the case is a GPU without
the library (NX2NAVI_GPL=0 would show it on any GPU).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The save at exit now copies the cache only once the builds already in the driver have finished, with new ones held back meanwhile, as it already did on other drivers. Intel's driver crashed copying a cache while builds ran into it, and when the window closes the game's save is written after the pipeline cache, so a crash in that copy would lose it. The case the save at exit missed, a window closed while the boot's prewarm workers built pipelines back to back, is covered by holding new builds back: a build from the file takes about half a millisecond. The prebuild's comment keeps why its default is two threads, with the measurements of one thread for the rest of the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The author of pull request #353 closed it on 2026-11-11 with the words that they give no permission to use its code. Its port (3134f524) goes: the mark of a pipeline that declares the table (VkPipeInfo.gpa, vk_pipeline.c pipe_add) and of the part that draws with it (vk_mem_gpa_use in vk_exec_draw.c bind_resources and mo_emit), the sync of the table's pools in every such part's prologue (vk_mem_gpa_sync), the submission with a callback in the replay's place as it stood (vk_sync_probe_submit), and --probe-vkmem's read through the table with its shader (test_gpa_read, runtime/shaders/gpa_read.spvasm).
In its place, after pull request #551, which was written without that code: a shadow pool goes into the table and onto a list of the table's shadows (vk_memory.c shadow_table_add); the record of a binding of the table notes the guest submission (vk_exec_draw.c ssbo_info, vk_mem_shadow_table_read); and vk_mem_shadow_sync brings the CPU's writes into every shadow on the list once for that guest submission, before the part is submitted. Once is enough, because the copy-ins read the guest submission's write-watch snapshots, which a second sync would find unchanged. Measured by #551's author on Linux (RTX 4090, Kokiri Forest): 113 and 76 frames over 25 ms in 75 s against 217 and 429 with the port, 43 against 41 fps, the picture complete in both.
What this line had built on the port stays, on the new sync: the test that passes over a pool with nothing written (shadow_pool_clean), the upload of the same pages into a table pool's VRAM mirror, the write-back of stores through the table (NX2NAVI_SHADOW_TABLE_STORES, table_wb_cb, now asked once per guest submission that binds the table) and the counts of NX2NAVI_SHADOW_CHECK. The probes that record their own commands (the lost-device probe, --probe-vkmem's table parts) call vk_sync_submit_own, written anew. vk_mem_shadow_storage stays: one line that returns the mode. Finalized pools in the table were already kept for vk_mem_shutdown here.
--probe-vkmem has a check of its own for the sync (test_table_sync): the shadow of a pool that is never bound keeps its old word through a CPU write and a guest submission that does not bind the table, and holds the new one after a guest submission that does. It passes with NX2NAVI_SHADOW=1 on Windows (RTX 5090), as do the store check with NX2NAVI_SHADOW_TABLE_STORES=1 and the probe without shadow storage; --probe-devlost ends as before. Not run: the game, with or without shadow storage, and anything on Linux.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A pipeline cache over the size limit was dropped at every start and, since the file is no longer written in play, never replaced: every start began empty. The play file is now folded in at the next start whatever its size when the file beside it is over the limit.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A mesh draw becomes its record (the workgroup count, copied on the GPU for an indirect draw), the task dispatch, a
scan that lists the mesh workgroups the tasks started, the mesh dispatch, and an instanced indirect draw with a
generated vertex stage and the program's fragment stage. The compute modules bind the resources of the task and mesh
stages, and their pipelines are made on a thread of their own while the program's draws are skipped.
The indirect mesh ring and the texture pool marks are released at a probe's shutdown.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>