A session of 2026-11-13 grew from 683 to 1095 OS handles in 11 minutes, rising at every area load and never falling,
while the guest's own handles stayed at 116-122 and the threads flat; the VMA block count fell back while the handle
count did not. The log could not show it: the 600-frame "mem: sizes" line had only the guest's handles, and nothing
told which kind of handle grows.
kernel.c kern_sizes now adds "process handles" (plat_handle_count, one system call every 600 frames under trace=perf)
beside the guest's "handles". platform.h gets plat_handle_census: on Windows the system's extended handle table
filtered by our process id, with the type names from NtQueryObject's ObjectTypesInformation; on Linux the
/proc/self/fd links grouped by kind. It never opens, duplicates or names a handle (a name query can block on a pipe).
With NX2NAVI_HANDLE_CENSUS=1 (default 0, read at start) and trace=perf, perf.c starts one long-lived thread that the
600-frame report wakes; when the count grew by 16 or more since its last census it logs "mem: handles frame N: T in
all (+D since the last census): Event a (+x), ...". The census reads a few MiB of the system's table in 2-5 ms, off
the drawing threads; one thread for the run keeps a new thread's own handle out of what it counts. New cfg rows:
HANDLE_CENSUS in known[], sections[] (diagnostics) and metas[] ("0", "0|1", restart), and an nx2navi.ini.example
entry.
New tests/handle_census_check.py builds the platform layer alone: 20 events and 5 sections show as Event +20 and
Section +5, the total stays within 2 of GetProcessHandleCount, the figures return once they are closed, and kinds
past the room given go into the last entry; docs/building.md describes it. Not reproduced before the change (the
growth needs a game run). handle_census_check, sync_wake_check and the cfg row check pass; every runtime file compiles
with the dev flags, and perf.c, kernel.c, win32.c and cfg.c add no -Wall -Wextra warnings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
docs/architecture.md mentioned the pacer only inside its low latency paragraph and RTSS nowhere. It now has the pacer
(the limit counting drawn frames, the 240 ceiling, movie rates, the slots and their catch-up, the present thread's
wait and pace_smooth, the acquire's waits, the step snapped to the paced rate), the one-limiter rule as the goal with
the exceptions that stand today (pace_smooth under RTSS, DLSS Frame Generation's Reflex beside the pacer, no limit at
all from the pacer while RTSS holds it through movies and windows with no present, a limit set in RTSS itself while
RTSS is kept out), RTSS's part (the lookup on its thread, the profile write and read-back, when the pacer stands aside
and when it keeps the limit, the kept-out runs that only read RTSS's settings, the restore on orderly exits and what a
kill leaves), and how to measure pacing (the present and perf traces, perf_summary, PresentMon as the reference, the
runtime's own hitches). The changes that wait for approval are not described as done.
nx2navi.ini.example's rtss paragraph adds low latency, and the second limiter a limit set in RTSS itself makes with
rtss = 0, frame generation or low latency, which the log and the settings menu now point out. README.md's frame
generation item ends its sentence on RTSS with what it does and the same note.
Docs only; check_content passes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A scratch grown past 32 MiB for a large texture went back to the usual size only when the next ASTC upload asked for one, so in the 2026-11-13 session the decoder held 224 MiB for the 70 s after the first area load and from a later load to the session's end. Each present now gives it back once no texture needed more for 5 s; nothing is made then, the next request makes the usual scratch, and the buffer is freed once the upload batches recorded so far completed, as before. The present only tries the decoder's lock, which can be held while VMA makes a block. astc_scratch_trim = 0 keeps the scratch until the next upload.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Past RELEASED_HARD (16,384) the sweep dropped the first released entry in release order that was overwritten or unsampled for 2 s, render targets included, whose drop vk_texture.c already ties to a black frame, and it walked the list from its head for every drop. At the end of the 2026-11-13 session the count sat at 16,384 for a minute while 12,811 of 15,734 released entries owned no memory. The entries now go by class: overwritten ones, then ones that come back intact and are past their usual take-back gap, then other intact ones, and only then ones whose content only the GPU made; still only unsampled ones, and the one sampled longest ago when all were sampled lately, as before. One walk takes a batch down to 256 under the bound. tex_hard_order = 0 keeps the rule of 0.10.1.
The drops past the hard count get a reason of their own, so the texture origins line and the reuse line count them apart from the sweep's drops past RELEASED_MAX, with the classes they came from. The class rules are in vk_tex_release.h and checked by tests/tex_release_check.py.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After a slow freeze the passes wait 250 ms, doubled for each further slow one, but the first fast freeze after a hold started the doubling over, so in the seconds after a load a 4-5 ms freeze came every 250 ms (Kakariko, 2026-11-13: five in a row, 16 frames apart), and freezes of 4-10 ms pushed frames of 25-52 ms over the stutter line. The doubling now starts over only after freeze_quiet_ms (default 5000; 0: the old rule) without a slow freeze. No pass runs while the texture pool makes an area's textures, when the frames are held anyway and one freeze took 32.4 ms, nor for freeze_load_hold_ms (default 3000; 0: off) after that or after an area's load. The regions that go idle meanwhile stay queued and are frozen later; their write-watch queries go on until then. A region is now queued once instead of again every freeze_idle submissions while the passes are held.
The rules are in runtime/freeze_hold.h, checked by tests/freeze_hold_check.py.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With mem_census = 1 the census trigger compared the private bytes with the last census, and Windows charges the video memory to them, so every gigabyte of textures started another 130-260 ms walk on the presenting thread: 22 of the 33 walks of the 2026-11-13 session came from that trigger, while the process's own commit grew 307 MiB in play. The trigger now reads the private bytes less the write-combined memory of the last walk (and what the driver's device-local figure grew since), compares them with the highest figure seen at a census, and waits 60 s after the last walk; the 3600-frame censuses stay.
On Windows one walk of the address space now gives both the commit census and the guest regions' committed bytes, which mem_guest_census walked a second time. The census counts the driver's write-combined views apart instead of as guest memory, counts as guest only the reserved guest regions and the loaded modules, and ranks the process's own allocations wherever they lie. The frame after a walk charges its time to a new "census" cause in the frame-time summary and the stutter map instead of "unattributed".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every RX 6000 loss whose pass marks named a pass was in one that starts with a native mesh draw, on every version from 0.6.0 to 0.9.2 and with every other setting tried each way; RDNA 1 cards on the same driver draw through the fallback and RDNA 3 and 4 on AMD's other driver draw natively, and neither has such a report. That the native mesh path is the cause is not shown. The decision moves into vk_mesh_path.h with a test of each device kind and setting; has_mesh_shader keeps saying what the hardware has, so the recorder thread and the low-end card test do not change. On those cards no native mesh pipeline is built any more: the seed list and the boot prewarm skip them. The early tail stays off with the fallback, a combination never measured. The fatal line names the mesh path, and NX2NAVI_VK_NOOPT's default applies with mesh_fallback = 0 alone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This takes back the three commits that added it (cd2f9f1, e60677e, a01910d): its runtime layer and Steam binding, the Co-op tab and what it drew over the game, the launcher's copy of Steam's library file, its settings, tests and docs. The tree is as it was before them, with the bug capture that came after kept: its note on screen no longer makes room for co-op's lines, and dbg_area, which the co-op had brought and the capture uses, stays.
The four settings of that co-op join the retired names, so a settings file that still has them logs no unknown key. A steam_api64.dll that the launcher put beside the game is left where it is: nothing loads it any more.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Vulkan has no quad or line-loop topology. Draws without indices were rewritten already; an indexed quad list went to the GPU with its indices under the triangle list topology, three at a time, joining corners of neighbouring quads, and an indexed loop lacked its closing line. Off by default and read at start; no log of Ocarina has shown such a draw so far, and the new line says when one comes. tests/index_rewrite_check.py checks the index lists.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A draw that finds every query slot still waiting for the completion thread goes uncounted, and the report after it said only what the other draws counted, at least 1: the game takes the object it tested for all but hidden for that frame. With the setting the report writes the larger of that and the last complete count reported into the same record. Off by default and read at start; the count of such reports is logged at the 1st, 10th, 100th and so on either way. tests/oq_hold_check.py checks the rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Through a nearest filter each of the game's shadow compares tests one texel, so shadow edges are stair steps of shadow map texels that crawl over the ground as the sun cascades follow the camera. The setting is off by default and read at start; with shadow_scale above 1 the samplers were already linear.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The shader memory cache held 777 MiB of SPIR-V for 7115 shaders for the whole session. A background thread now
compresses the SPIR-V of each shader no reader pinned for shader_compress_idle_s seconds (zstd level 1, 26% of the
bytes on the test install's 44,151 modules) and frees the plain copy; readers pin it through gfx_shader_spirv_pin and
get it decoded back. What the drawing thread compares at pipeline misses and draws, the module's FNV-1a and its Binding
decorations, is kept with the shader, so module_binding_missing, the water corrections and the DLSS, crumbs and skip
lists decode nothing. A compute pipeline created at a dispatch and a mesh shader's first pipeline key still decode on
that thread, and the memory report counts those decodes apart, with the SPIR-V as held against uncompressed and the
shaders held compressed. shader_compress = 0 keeps it plain.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
floor_watch.c takes up to twelve of the floor scan's survivors (the platform's rigid body controller unit first, then one per object at the pivot's height), watches them four at a time through the debug registers on every thread (platform.h plat_watch_set, Windows only), counts each access's call chain in a lock-free table and logs the chains with the executable's symbol names after each pass. prof_syms gains a callback form for that.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The character controller's three follow-surface modules kept only a tenth of the floor's velocity whenever the physics' inverse step passed 100, which every update above 100 fps did. The gate now compares with 100 over frames per update from the patch page above 60 fps, and with the game's 100 at 60 and 30 fps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Link is carried by the Deku Tree's floating platform fully at 60 fps, about a tenth at 160 and not at all at 240,
which follows the solver steps an update (4, 2, 1 with physics_steps = 1) rather than those a second. The new set
osolverfull raises the rounded-up count to the 60 Hz frame's 4 in every update; physics_steps = 2 switches it on and
osolver off at start, and the mode is logged. 60 and 30 fps keep the game's 4 and 8. It costs more physics time above
60 fps: 576 solver steps a second at 144 fps and 960 at 240, against 288 and 240 with 1, the default, which stays
until a run confirms the carry. frame_step_check runs the lifted words of all three counts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Released textures go once they have gone unused for the hold, and what a switched-off upscaler or SMAA held is freed, with no setting to keep them. A vram_use line left in a settings file is known and read by nothing. Memory use is to be decided by the card's and the system's budget instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A group too small to share out has fewer than 64 draws (2 x CHUNK_DRAWS), so a threshold of 64 or more never matched
in group_start and the setting did nothing. The setting's range is now 0..63, the menu's slider ends at 60 in steps of
4, and a value of 64 or more from nx2navi.ini reads as 63 with one line in the log.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The job (main+0x415300) hands the time manager's step to the sound system in its phase 0 and runs the sound objects'
and the system's updates in phases 1 and 2. With the set ostep that step is a fraction of a frame above 60 fps, and fed
fractions the game has been reported to keep sounds held after an area unloaded until no voice was free, new sounds
and then the music going silent until a restart. The new set osound (sound_steps, on by default) calls the page's
+0xf10 after the job's prologue: phase 0 adds the step to what the job is owed and runs once a whole step has built
up, phases 1 and 2 follow that choice, and a job that does not run gets phase 3, which returns through its own
epilogue. After phase 0's load of the step the page's +0xf00 makes a fraction one whole step. At 60 fps and below
the job runs every frame with the game's step. Both sites were checked against the module; frame_step_check covers
the gate at 60, 30, 144 and 240 fps. Needs the game code generated again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Steam co-op took the setting name of the old beta's switch, coop. A player whose nx2navi.ini still had coop = 1 from that beta got the new co-op switched on at the first start of the new build, unasked: the game signed in to Steam as its test app. The switch is now coop_steam (NX2NAVI_COOP_STEAM), off by default, and coop is a retired key like the old co-op's other settings: known, read by nothing.
--probe-cfg now loads a file of the old co-op and checks that its keys are no unknown keys, that coop = 1 leaves the new co-op off, and that coop_steam = 1 turns it on; it passes on a build of this commit. The game itself was not started with the change.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Scan run 1 armed on a floor that only sinks and found points 3.4 m above Link that follow him (the camera's). The scan
now arms on a straight horizontal drift at a steady height, snapshots from 4 m below Link to 0.5 m above, keeps the
triplets that moved with him and lie more than 0.3 m below him or more than 0.5 m from his feet, and logs each of them
(64 at most) once a second with its move over that second.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Deku Tree's floating platform is not one of the engine's ground groups, and where its position lives is not known.
With floor_scan set (off by default), once Link has been carried at 60 fps for 30 frames with the left stick at rest,
one snapshot of the game's heap and alias regions keeps every float triplet near him; 30 frames later the triplets
that moved as far as he did are kept, and from then on each frame logs the twelve of them farthest from him with their
addresses, positions and moves. The snapshot logs how long it took.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-op loads steam_api64.dll from beside ocarina.exe, and the repository may not hold that file. Before Play and before a start from the Steam shortcut, when the file is not there, launcher/steamlib.py now copies one: one a release ships in its bin folder if it has one, else the newest one in the games of the player's own Steam libraries that Valve signed (WinVerifyTrust and the signer's name) and that has every call runtime/steam.c uses. Nothing is downloaded, the search takes a second or two once, and with no Steam or no suitable file the game starts as before and the Co-op tab says what is missing. The tab's two texts about the file say so in the four languages.
Checked: four new tests on made-up library folders (too old, unsigned, too deep, a second library, a shipped file first, none said once) and the launcher's 190 tests pass; on this PC the search found 40 files in 1.2 s, 25 suitable, and copied a Valve-signed one; that file's library version, an older one than the game was run with, signs in as app 480 and makes a lobby in a program without the game. Not run: Play in the launcher itself with this change.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Up to four players, each in their own game and save, meet in a room. Rooms are Steam lobbies and the games talk through Steam's networking, so nobody forwards a port and nobody runs a server. The game signs in to Steam as its test app (480), so Steam shows the player as playing Spacewar. Off by default; the menu has a Co-op tab with Create a room, Join a room by its ID, Invite a friend, the players, chat and Leave, in English, Russian, Brazilian Portuguese and Simplified Chinese.
runtime/steam.c loads steam_api64.dll from beside the exe at run time and declares the C functions it calls itself; nothing of the Steamworks SDK is in the repository, and a player copies the file from a Steam game they have. runtime/coop.c is the room: the lobby's owner is the host, lets games of the same protocol and game build in and lists them, and every game takes positions, chat and progress only from the players on that list. runtime/coop_game.c reads Link from the Player actor and shares progress, items, songs and quest items through the game's own flag routines, each value only ever raised; small keys, rupees, ammunition and hearts stay each player's own, and the save is copied to coop-backup before anything of a room reaches it. The other players show as a name with a distance where their Link stands, projected with the upscaler's camera.
One Steam account cannot be in a lobby twice, and this PC has not the memory for two games, so the room and the game side were run with one game and tests/coop_peer.py as the second player over runtime/coop_local.c, a stand-in for Steam on 127.0.0.1 that only the environment turns on: the peer was let in, saw the game's Link in Hyrule Field, chat went both ways, the save was copied, one flag the save lacked was set and a flag the game does not share was refused. On Steam itself one game signed in as app 480, made a room, showed its ID and the player's Steam name on the Co-op tab and left. Not run: two Steam accounts in one room, an invite, a join by room ID over Steam, a host that leaves, a removal, and the menu's text probe on this build.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Above 60 fps Link stands still on the Deku Tree's floating platform while it moves under him, and the code that carries
him is not found yet. With floor_probe set (off by default), each present logs the frame's step, Link's position and
how far he moved, and the nearest moving ground group of the engine's ground manager with how far it moved, so one run
at 60 and one above it show where the carry is lost.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The physics' two water managers and the game's interactive floor simulation (the Deku Tree's ground webs) step their
surfaces in fixed steps of 1/60 s, as many whole steps as the frame's time holds, and drop the fraction, so every
frame shorter than 1/60 s ran none and the surfaces stood still above 60 fps. The new set owater (water_steps, on by
default) calls the page between the division and the game's cut, which keeps the fraction per object; at 60 fps the
count is the game's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The hidden beta shared story progress through a relay a player had to run and never showed the other players. A new co-op replaces it. Gone are runtime/coop*.c and their headers, the menu's Co-op tab and its texts in four languages, tools/coop_relay.py, the co-op tests, docs/coop.md, the [coop] section of nx2navi.ini.example, the --probe-coop mode, the coop trace item, and Monocypher, which only this layer used.
The old settings stay known as retired keys, so an nx2navi.ini that still sets them logs no unknown key, and they stay on the list of private settings, so a bug report keeps a room's secret, a relay's address and a name out. The platform layer's UDP sockets and fs_save_snapshot stay for the new co-op; cfg_ini_now and fs_profile_path, which nothing else called, are removed.
Checked: the game builds and starts, the menu shows its four tabs, --probe-cfg and --probe-fs pass, and the launcher's private-settings test passes. tests/save_share_check.py builds without its co-op stub; it cannot run from this worktree because the folder's path is longer than Windows allows, on main too.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The patch set text_speed scales the typewriter speed of a message the game lets the player skip (fast, three times as
fast, its scripted waits as long) or runs the game's own skip on the first frame of each page (instant). Messages the
game marks unskippable, such as those that turn their page on a timer, keep the game's speed. The setting is live and
has a row on the Game tab in all four menu languages; with it at normal the set is off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With frame generation running and no DLSS or FSR upscaling, vk_dlaa.c arms and ends the frame in the same places and,
where the upscaler's evaluation would run, makes only frame generation's inputs (fg_only_frame): the scene's depth and
camera found as before, motion vectors from the same pass at the scene's size, no jitter at all, and the picture without
the HUD copied from the game's own scaled picture. DLSS Frame Generation and AMD's frame generation no longer need an
upscaler set; NVIDIA's through NGX still needs DLSS at the start and then keeps running when the upscaler is switched
off. The menu's Frame generation row stays usable with every Upscaling choice and the Upscaling row keeps frame
generation as set, with texts in all four menu languages. The log says at the start and at each change whether frame
generation takes its inputs from the upscaler or runs without one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Frame dumps show the upscaler reads the bloom composite's output, which the game has already exposed, bloomed and
tonemapped to 0..1. With dlss_prebloom = 1 it runs at the bloom chain's first pass on the scene's linear light. Without
upscaling its picture goes back into the light target. With upscaling the lens flares and the bloom composite are
drawn at the picture's size and that picture replaces the game's upscaler's output. Off by default; with it off
nothing changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The row writes scene_share = 1 with dlaa = 0, which the start already sized the render-target heap for; widescreen.c now
reads the share live, says when the heap needs a restart for it (the row's note and the Restart count), and logs the
scene size, the picture size and how the scene is scaled once the fixed share takes over and at each change. The
stand-in copies a scene of the picture's size texel for texel with a nearest sampler, and the performance overlay shows
Ocarina's real scene size instead of the other builds' placeholders. scene_share gets its settings row and its ini
text; the row's texts are in all four menu languages.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Auto gives half the physical cores less one, at most 6: 2 on 6 cores, 3 on 8 (the count measured best on an 8-core CPU), 5 on 12. Four cores or fewer get none, and so does AMD's Windows driver for RX 6000 and older, where a player's device was lost with workers on and the cause is not known. The menu's row lists Automatic first with the count it gives on this PC, and the log says how many were started and why.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The rows keep their plain names. Their descriptions now say what the number counts and that 0 turns the setting
off: 0 to 4 for replay_pipe, 0 to 64 in steps of 4 for replay_small.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The rows are now CPU helper threads, Helpers work ahead, Helpers take small jobs and Start next frame early, each
with a short description of what it does and what it gained. Helpers work ahead and Helpers take small jobs are
switches: on writes replay_pipe = 4 and replay_small = 16, the values measured best, and another value set in
nx2navi.ini shows as on and stays.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Low, the default, lets released textures go after the hold and frees what switched-off upscalers and SMAA hold; High
keeps both for the session. The row shows Low for any setting but high, the old balanced among them. The descriptions
in all four languages no longer promise simpler surfaces or missing objects, since the default no longer trades them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Worker groups in flight (replay_pipe), Small groups to one worker (replay_small) and Early frame end (tail_early)
sit under Replay workers. A row whose setting does nothing without another one is greyed out and says which it needs.
The example settings file and the draft release notes name the rows, and the notes gain the replay_pipe and
replay_small entry.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Balanced, the default, is what the earlier commits made the default. High keeps what DLSS, frame generation's
HUD-less picture, FSR 1 and SMAA made after they are switched off, as before them. Low also sets, for the keys the
player leaves unset: released textures keep at most 1 GiB (tex_released_mb), textures give way from 70% of the video
memory budget (tex_vram_pressure) and the shared pipeline list is built at first draw (pipe_seed_boot = 0). Unsampled
live textures are not dropped in any of them: that eviction left the ground see-through for good. The values come
after the device profile and the low-end mode (cfg.c VRAMLOW); the row is in the Screen tab under Texture detail and
takes effect after a restart. The architecture notes describe the new memory report lines.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
DLSS's sizes (their images and features), the HUD-less picture for frame generation, FSR 1's two window-size
images and SMAA's three work images stayed for the rest of the run after their setting was turned off. They now go
after ten seconds without use (SMAA's after a minute, since its passes only run where the game's own SMAA does): the
DLSS sizes on the replaying thread with no wait for the GPU, FSR's once every present slot that read them has been
waited for, SMAA's through the deferred destruction. Switching a feature on again makes them again, as its first
frame in a run does. At 5120x2142 that is about 0.9 GiB with DLSS off, 168 MiB of FSR and 109 MiB of SMAA.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The stance site called page +0xf50, which the 0.10.0 line gives the water ripples above 60 fps: the second
registration ends every 1.1.1 start with "registered twice", the sprint button off included. It calls +0xf30 now, and
the comments say which slots the other sets hold. The set's switch is NX2NAVI_SPRINT_BUTTON_PATCH, not a name another
open request uses for a set of its own.
The stand-still timings count 60 Hz frames (frame_step_frames), so a toggled sprint no longer ends on a short stop at
high frame rates. A press is decided at its start for its whole length: kept from the game and the sprint's when it
begins in gameplay (B: while Link moves), else the game's alone, so a held B is not handed to the game half way and a
B that closes the pause menu starts no sprint. A sprint switched off with the button setting does not come back by
itself, Link's state is read only where the memory is readable, and the row, nx2navi.ini.example and the controls
page say that B is the jump under the game's Swap Jump Controls and name the button without assuming the layout.
tests\sprint_check.py covers the press latch, the menu press, 240 fps and the switch-off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>