Commit Graph

7 Commits

Author SHA1 Message Date
chrg6
534591be04 End a run whose GPU device is lost in one place: one report, no callbacks of unfinished submissions, and exit code 72.
A lost device used to end the process from whichever submit or wait noticed it first, while the present only logged it
and went on and the other threads kept calling the driver. The completion thread could take the submissions' timeline
as reached and run the callbacks of submissions that never finished.

vk_device_lost_check now takes the result of every submit, present, acquire and wait. The first thread to see the loss
sets a flag, writes the report and ends the process as a fatal error does (the log written, a save commit under way
finished), with an exit code of its own; later threads stop in that call, and a watchdog ends the process after ten
seconds should the first thread hang. The replay, its submit, the uploads, the present and the lazy fetch read the flag
and return without touching the device. The completion thread asks the device with a call of its own before a new
value counts and runs no callback once the flag is set.

The executable's --probe-devlost and tests/device_lost_check.py check this without a lost device, and
device_lost_at in nx2navi.ini ends a real run the same way.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 04:35:30 -05:00
chrg6
7ccb958c47 Let a save Commit that is under way finish before the crash report or a fatal error ends the process, for at most two seconds.
The game's Commit returns once the commit is queued, so the game may already have reported the save as done while its thread still copied; ending then left an unfinished copy that the next start rolled back.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 23:26:01 -05:00
chrg6
caf50ecf1c Turn the lazy write-back off by default on AMD's driver for RX 5000 and 6000 cards, and say in the log which settings a run had.
A player on an AMD card reported crashes in fights and that a line added to nx2navi.ini cured them. That line, async_compute = 1, is no setting of the game, and neither are two more in the same file; the one line of the file that changes how memory reaches the GPU is wb_lazy = 0. A second report, an RX 6600 on 0.7.1, lost its device 3.5 minutes into play with the lazy write-back on. Neither proves it the cause: the player changed several lines at once and sent no log, the RX 6600's last pass mark is inside a draw pass and not a fetch, cards with 8 GB lost their device the same way on NVIDIA before the lazy write-back existed, and reading the fault handler, the fetch, the arming and the buffers' lifetimes found no failure path. What depends on the driver and cannot be checked without the card: pages of guest memory are inaccessible while a host-pointer import of them is bound and written by the GPU, and Vulkan calls run inside the access-fault handler.

The default is now decided once the driver is known (wb_lazy_choice.h, vk_memory.c vk_mem_lazy_decide): on under Windows as before, except on AMD's driver branch for RDNA 1 and 2, which none of us has run it on; AMD's driver for RDNA 3 and newer keeps it on, since builds with that default were measured on an RX 7900 XT. What the player sets wins everywhere, and one line at start says the choice and its reason. On those cards open areas run at the 0.7.0 frame rate again (on an RTX 5090 that was 65 fps against 90 in Hyrule Field; not measured on AMD). tests/wb_lazy_check.c checks the choice by platform, driver and setting without a GPU.

For reports of this kind the log now holds what was missing. At start: every setting nx2navi.ini sets, and in one line the keys that are no settings of this version and do nothing; the settings menu shows those in its bottom row. At a fatal error or a crash: one line with the card, its driver, the memory mode, the lazy write-back with its reason, armed ranges, fetches so far and a fetch in progress, and the texture detail (dispatch.c rt_fatal_note_add, vk_device.c fatal_note), since a report is often the end of a log alone.

--probe-cfg loads the player's file: the three lines are named, and the menu's save keeps them and every other line it does not change byte for byte. Nothing here ran on an AMD card, and no fatal error was provoked to read the new line.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 15:14:25 -05:00
chrg6
a03e059d2b Write the log from a thread of its own, so a stalled write no longer holds the thread that logged.
Every log line was two writes on the thread that logged it, to stderr and to the log file. Such a write can stall for
tens or hundreds of milliseconds (a busy disk, a virus scanner, a console or a pipe that is slow to take it), and the
render thread logs too: a frame it spent in a write was a hitch with nothing else to show for it.

In a game run the lines now go into a queue that a log thread writes out in order (runtime/logq.c). A fatal error,
the crash report and the end of the process write the queue out on their own thread first and write their own lines
directly, so nothing is lost to an exit. A thread that finds the queue's lock held for long, or the queue full, writes
its line itself. NX2NAVI_LOG_ASYNC=0 writes every line where it is logged, as before.

Every write is timed in both modes: a "log: ... writes of the log took over 2 ms" line counts the slow ones, gives
the longest and says whose time they took.

tests/logq_check.py checks order and completeness with eight threads, a slow destination, a stopped destination with
the queue full, and the synchronous flush.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 07:22:41 -05:00
chrg6
00f06e669e Fix nine runtime faults a tester's report named: a stack overrun on mesh draws, lost YMM halves on preemption, and seven more.
- The mesh stage's storage table starts 0x90 bytes before the end of the 2 KiB constant bank, and all sixteen slots
  were written: 0x6C bytes past a stack buffer on every mesh draw. It holds the nine slots that fit.
- The prebuilt runtime is compiled without AVX, so its preemption stub saved only XMM0-15 while the lifted code of
  an AVX2 processor keeps data in the upper YMM halves, which the stub's callees may clear. Both bodies are built
  now and the one for the processor is chosen at the start.
- After an FSR 3.1 frame generation error the window's swapchain was still AMD's object but went to the plain Vulkan
  calls. Swapchain calls follow whose swapchain it is, and a failure takes it down as a switch in the menu does.
- A movie is paced at its own 60 fps under a lower limit too: at 40 fps it ended 25 s behind its sound.
- A lost device left the wait for an upload spinning for good; it ends the run with the device's report.
- The compute pipeline key had four bytes of padding that were hashed and compared, so a prebuilt pipeline could be
  missed and built again.
- A thread's TLS pointer was published before the TLS was allocated, so the slot was always 0.
- A fatal exit puts RivaTuner Statistics Server's profile back, and an ini saved as UTF-16 is read.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 21:54:40 -05:00
Tyler
2270664be2 Total each allocation once in the commit census, add a size breakdown, and write the profile on a crash
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HtayeqEG2x5woYzWuEQBGV
2026-11-09 08:20:01 -05:00
Valiantsin Dzerakh
0478c13e45 Import the base tree (MIT, see LICENSE) 2026-11-07 05:04:38 -05:00