Commit Graph

9 Commits

Author SHA1 Message Date
epicmeme546
a710c6193d Measure the overlay's frame times where the pictures go out, and keep an early picture back to seven eighths of the recent interval.
The overlay's rate, lows and graph were fed from the game's present calls. With the replay on the submitting thread, work held for an event is replayed with the next frame, so the calls come in uneven steps although each frame costs about the same: 36 and 9 ms apart in turn in a village, a sawtooth in the graph and a 1% low of 14 fps, while the pictures went out 19.7 ms apart on average and changed by 3.9 ms from one to the next. The present thread now reports each picture (perfmon_shown) and the overlay takes its intervals from that; the game's calls are used only where no present thread reports.

A picture that arrives early now waits until seven eighths of the recent interval have passed since the one before (vk_backend.c pace_smooth, NX2NAVI_PACE_SMOOTH, on by default; not with frame generation). In that village the change from one picture to the next went from 3.9 to 3.0 ms at 51 fps both ways, in a graveyard from 3.1 to 2.6 ms at 54.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 06:35:28 -05:00
epicmeme546
7e23e7309b Copy a frame's uniform blocks at the submit call with the replay on its own thread, and say what that option can show.
With NX2NAVI_REPLAY_ASYNC the uniform snapshot was taken when the replay thread started recording a submission, up to a frame after the game submitted it. The game rewrites that memory without waiting for the GPU: in a graveyard the settings block of the shadow pass held another block's values in the frame its per-frame allocator moved on to the next stretch of memory, about every 364 frames. The submitting thread now takes the copy before it queues the submission (vk_usnap_take), and the replay thread takes it over and leaves out what GPU writes in flight touch (vk_usnap_begin adopt). A frame dump of such a frame shows the block as the game submitted it.

That frame still comes out dark with the option on: vertex, storage and index memory reaches the VRAM mirrors when the replay uses it, as late as the uniform blocks did, and the snapshot covers uniform bindings only. With the option off, 3,000 presents in a row were free of dark and odd frames in that graveyard and in a village; with it on, one frame in about 364 was dark. It gave 65.6 against 56.1 and 64.1 against 54.3 frames per second in those two places. The option stays off by default, and its menu text, the example settings file and the release notes now say that it can show a dark or flickering frame.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 06:04:14 -05:00
epicmeme546
d1bebd34cd Keep the previous picture on screen instead of showing a frame that lacks draws, and show the game's own VRAM in the overlay.
A draw whose shader or pipeline is still building is left out of its frame, and the frame was shown without it: a black or unlit picture with the interface intact when it was a lighting pass, a light going out, or ground missing for a frame. In a player's session a full-screen draw was skipped after its 50 ms and the frame came out black as a boulder hit.

The frame's present is now left out when draws were skipped (vk_backend.c frame_hold, NX2NAVI_FRAME_HOLD_MS, 120 by default, 0 off). The game runs on, so nothing waits. The hold comes from an allowance that fills again at an eighth of the clock's rate, so a long build or a run of them shows its frames as before and does not freeze the picture; a full-screen draw that would be skipped with the allowance spent waits on instead, 500 ms at most. Not with DLSS Frame Generation.

On a first walk through a village with no pipeline recorded, 21 of the 23 frames with skipped draws were held back; in the Lost Woods, 7 of 8.

The performance overlay: the VRAM line is the card's dedicated memory in use, which counts every program on it: a player read 14.5 GB as the game's while the game held 7.3 GB. The line's third cell now gives what this process holds on the device-local heaps (the driver's budget figure), in place of the GPU clock, which stays where the driver gives no budget.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 04:39:19 -05:00
epicmeme546
5f4bbd2084 Play the launcher's sounds at Low by default.
A new launcher.json starts with sounds at low instead of off, and a value the file cannot hold falls back to low too (launcher/ui/sound.py DEFAULT_LEVEL). The player can still pick Off, Medium or High in Customize Launcher. The sounds are still only the game's select and back sounds, read from the player's own game.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 02:02:45 -05:00
epicmeme546
e10ef60fd5 Keep the driver's cache of stage libraries warm, link a missing pipeline instead of skipping its draw, and count the texture cache's waits in time.
The preparation builds every stage library once so the driver's disk cache holds it and a library a draw needs later takes under a millisecond. Turning dynamic vertex input off for AMD's RDNA 3 and newer driver changed the dynamic states every library lists, which gave each one another entry in the driver's cache, and nothing built them again: an update carried the prepared shaders over without the driver step. On an RX 7900 XT (26.10.1) all 42,142 prepared libraries were cold, 93 ms a vertex and 242 ms a fragment library on average. With no pipeline recorded, a walk through a village skipped 11,180 draws while their pipelines built and made 94 draws wait 5.5 s in all, four of them 1.0 to 2.0 s; a player's session log shows up to 114,834 draws skipped in 600 frames and 181 waits of 251 ms on average. Skipped ground and walls appear and disappear, and a skipped lighting pass is a black frame with the interface intact.

- The game checks the driver's cache at every start (vk_pipeline.c lw_start): a sample of the prepared fragment libraries is built, and when their median time says the cache is cold the whole prepared list is built into it again on idle-priority threads while the game runs. shader-warm.txt records a warm in progress, so the next start goes on with one a run ended, and stops the tries on a driver that does not keep the libraries. This also covers a driver update and a cache the driver emptied.
- An update that carries the prepared shaders over runs the game's --warm-shaders (tools/make_game.py warm_driver_cache): 11 s with the libraries there, about 8 minutes with all of them cold on that card.
- A draw whose pipeline is missing waits for its fast link from a budget of 6 ms a presented frame, 3 ms at most each (NX2NAVI_PIPE_LINK_MS), before it is skipped: with warm libraries the link is done within that.
- Full-screen draws wait from their 50 ms budget again instead of being skipped (NX2NAVI_PIPE_SKIP = any is the default; fullscreen stays selectable). With warm libraries the wait is a millisecond.

The same walk afterwards: libraries 0.3 and 0.7 ms on average, 1,605 draws skipped, 1,473 of them in the scene's first 600 frames and 8 to 80 in each 600 after, and 19 waits of 60 ms in all. First visits to four other saves (a mountain pass, the Lost Woods, Kokiri Forest, a river) waited 12 to 84 ms in all except the Lost Woods, where mesh shader pipelines, which have no stage libraries, and vertex libraries that need added outputs still compiled once: 23 waits, 2.1 s in all, the longest 776 ms.

The texture cache counted its waits in presents chosen at 60 a second: at 165 presents a second the 1800 that stood for thirty seconds were 11 s, so a released render target went sooner than meant and a texture out of view for 11 s was retired and showed its stand-in for some frames when it came back. The counts are now taken times the present rate over 60 (presents_for), and a texture is retired after two minutes without a sample instead of thirty seconds.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 01:36:29 -05:00
epicmeme546
8d91667c28 Keep only the game's select and back sounds in the launcher, and make none of its own.
The cursor's sound played at every move of the pointer and cut the other two short, as one sound plays at a time: it is gone, and moving the cursor is silent. A choice, a changed switch, Play and the end of a build play the game's decide sound; going back and a failure play its cancel sound. The chimes the launcher made from sine tones are removed too, so every sound it plays is decoded from the player's own game into data/cache/sounds and it is silent until the game has been read. No sound file is in the repository, the release or the setup.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 00:44:36 -05:00
epicmeme546
158ba315d5 Play the game's own cursor, select and back sounds in the launcher.
The launcher's sound effects were chimes made from sine tones. They are now the game's interface sounds, the ones its menus make for the cursor, a choice and going back: SE_Sys_Cursor00, SE_Sys_Do00 and SE_Sys_Cancel00, the files the in-game menu plays. The launcher decodes them from the player's built game or dump into data/cache/sounds (gamefiles.extract_sounds, a BWAV reader for PCM16 and DSP-ADPCM), beside the font it already reads that way, so no sound ships. The chimes stand in until the game has been read. The cursor's sound is a little under the others, as in the game's menu, and is left out for a quarter of a second after a choice, since one sound plays at a time and the pointer landing on a row of the next screen would cut the choice's sound short. Sounds stay off until the player picks a loudness.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 00:21:31 -05:00
epicmeme546
44d4095094 Add Customize Launcher: colour schemes, a background picture of the player's own, animations and sound effects.
The launcher's home screen has a Customize Launcher row. Color Scheme steps through six schemes (Kokiri Forest, the colours so far, Death Mountain, Zora's Domain, Gerudo Valley, Temple of Time and Shadow Temple): each is the first scheme with its woods, accents, backdrop and glow turned to other hues, so all keep the same light and dark steps and the same text. Background takes a picture file, cuts it to the window's shape and keeps a fitted copy in data/background.npy; Background Dimming darkens it and the panels turn a little see-through over it. Animations (on by default) make the cursor glide between rows, a new screen slide in, sparks drift over the backdrop and Navi bob in the title band; they move by the time that passed and stand still while the window is hidden. Sounds are short chimes made from sine tones, off until the player picks a loudness.

Redrawing in another scheme takes about a third of a second: the blurred masks and the noise, which no colour changes, are kept, and compositing onto a solid picture is a plain mix.

The selftest's screen capture passed window handles as plain ints, which failed for a handle above 2^31 and left some screens without their picture; its calls are typed now.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 23:27:02 -05:00
chrg6
b2074499de Let players export their save into one zip for a bug report and import a save someone shared, in the launcher and in the game's menu.
The launcher's home has a Saves screen: Export Save writes NX2navi-save-<date>_<time>.zip into Downloads (or a chosen folder) with a manifest, the save the game would load next and, for a bug report, the game's latest log and nx2navi.ini, never a key file; Import a Save checks a zip's manifest, game, paths and CRCs, backs the current save up into the saves folder and replaces it while the game is not running. The game's Game tab has the same exports and an import that waits in profile/save-import and becomes the save at the next start, since the running game would write its progress back over a save replaced under it.

The zip code (runtime/save_zip.c) and the import at start are checked without game files by tests/save_zip_check.py and tests/save_share_check.py; the launcher side by its test suite.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 13:13:43 -05:00