The chunks of a parallel group took query slots from the ring as they recorded, so the slots of the group's chunks
interleaved. The completion thread reads and resets slots in runs that follow the ring, and with interleaved slots it
made four times the result calls and a reset per slot: the wait after a frame's first submission ended 3.5 ms after
the GPU had run it instead of 0.6 ms, and the replay time the workers saved went into that wait (44 fps with 3 workers
as without). The front pass now gives each chunk a block of slots, as many as its draws that count samples and render,
in the order of the stream; a segment's slots are taken in ring order. Standing in Hyrule Field, 3 workers: 49.8 fps
against 43.7 with the workers off.
NX2NAVI_GPU_TIMELINE=<frame> writes four frames from that present on to the log: each replay, each timed part's submit
and GPU run, the waits for the GPU and the workers' groups, so a run shows whether the GPU waits for the replay, a wait,
or the CPU behind one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Stage 1 of recording a submission on several threads. A submission's draws come in runs between ops that have to
stay in the replay's order on its own thread (dispatches, copies, texture and buffer clears, events, the game's
barriers, calls). With NX2NAVI_REPLAY_WORKERS=1 a run of 16 draws or more is recorded by a worker thread: it takes a
copy of the replay state, records the run into a command buffer of its own pool with a draw context of its own, ends
it behind a full barrier and hands the state back. vk_sync_append puts that command buffer into the part between the
replay's own pieces before and after it, so the GPU runs everything in the op stream's order. The submitting thread
waits for each run, so every side effect keeps the replay's order; this stage checks that a run recorded apart from
a copy of the state gives the same pictures. The default, 0, replays as before.
walk's handling of the ops that do not steer it moves into op_one, which the worker uses too. NX2NAVI_REPLAY_RUNS=1
logs every 600 frames how the draws fall into such runs and which ops break them. The draw replay's hot functions load
their recording context once instead of at every use.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
That wait ends when the GPU has run the submission's own commands (wb_split = 1). The completion thread was then still
at the last frame's submissions, so the occlusion counts, counter reports and event values the game reads next reached
its memory after it had gone on. A player's capture in Hyrule Field shows the result: trees, ground and walls lose
their direct light for single frames about every 36 frames, 57 of 1,800 frames, and with the fence's wait
(wb_split = 0) the same place showed none.
The fence's wait also covers the rest of what the completion thread does for those submissions, 0.23 to 0.40 ms a
frame of page stamps the game does not read. So those results now have a queue of their own
(vk_completion_add_result), and the waiter runs the ones due for its submission and the ones before it as soon as
the GPU's signal is there; the completion thread runs them the same way, ahead of its other callbacks, one runner at
a time and in the order they were queued. wb_split = 3 is the bare wait as it was, to measure against.
Checked: it builds, the launcher tests and the address table check pass, and the player's hand test of this wait at
that place showed no such frame. Not measured: no scripted run of it was made (the one scripted run with the bare
wait in that field shows 1,170 occlusion counts a frame written late and no dark frame, so the script does not
reproduce the fault), and its cost against the bare wait is not known.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The author of pull request #353 closed it on 2026-11-11 with the words that they give no permission to use its code. Its port (3134f524) goes: the mark of a pipeline that declares the table (VkPipeInfo.gpa, vk_pipeline.c pipe_add) and of the part that draws with it (vk_mem_gpa_use in vk_exec_draw.c bind_resources and mo_emit), the sync of the table's pools in every such part's prologue (vk_mem_gpa_sync), the submission with a callback in the replay's place as it stood (vk_sync_probe_submit), and --probe-vkmem's read through the table with its shader (test_gpa_read, runtime/shaders/gpa_read.spvasm).
In its place, after pull request #551, which was written without that code: a shadow pool goes into the table and onto a list of the table's shadows (vk_memory.c shadow_table_add); the record of a binding of the table notes the guest submission (vk_exec_draw.c ssbo_info, vk_mem_shadow_table_read); and vk_mem_shadow_sync brings the CPU's writes into every shadow on the list once for that guest submission, before the part is submitted. Once is enough, because the copy-ins read the guest submission's write-watch snapshots, which a second sync would find unchanged. Measured by #551's author on Linux (RTX 4090, Kokiri Forest): 113 and 76 frames over 25 ms in 75 s against 217 and 429 with the port, 43 against 41 fps, the picture complete in both.
What this line had built on the port stays, on the new sync: the test that passes over a pool with nothing written (shadow_pool_clean), the upload of the same pages into a table pool's VRAM mirror, the write-back of stores through the table (NX2NAVI_SHADOW_TABLE_STORES, table_wb_cb, now asked once per guest submission that binds the table) and the counts of NX2NAVI_SHADOW_CHECK. The probes that record their own commands (the lost-device probe, --probe-vkmem's table parts) call vk_sync_submit_own, written anew. vk_mem_shadow_storage stays: one line that returns the mode. Finalized pools in the table were already kept for vk_mem_shutdown here.
--probe-vkmem has a check of its own for the sync (test_table_sync): the shadow of a pool that is never bound keeps its old word through a CPU write and a guest submission that does not bind the table, and holds the new one after a guest submission that does. It passes with NX2NAVI_SHADOW=1 on Windows (RTX 5090), as do the store check with NX2NAVI_SHADOW_TABLE_STORES=1 and the probe without shadow storage; --probe-devlost ends as before. Not run: the game, with or without shadow storage, and anything on Linux.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The fence's wait cost about 4.5 % of the frames a second, and the player who reported the flicker still sees it and black frames with it. wb_split = 0 keeps the fence's wait for whoever wants to compare.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With shadow storage a write-back at a fence copies a page that has no base copy whole from the shadow into guest
memory. Every write the replay records gets base copies, so such a page means the pool the write was noted on was
finalized before the fence and another was made at its address: the new record's shadow is a copy of guest memory
from its own start, holds no byte of that write, and went over everything the CPU had written to the page since.
The page is now left alone when the record is younger than the submission whose fence it is, or when the CPU has
written the page since the shadow's last copy-in; the shadow line counts such pages.
--probe-vkmem has the case: with NX2NAVI_SHADOW=1 it fails without this change (0x11 over the CPU's 0x22, with
imports and with mirrors) and passes with it, as does the run without shadow storage.
Whether a game does finalize and remake a pool inside that window was not observed in play.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
For a day that wait ended on a second timeline, when the GPU had run the submission's own commands (wb_split = 1,
then the default), on the thought that it only left out write-backs nothing needed yet. It left out the completion
thread's side effects for the submissions before it as well, and the game reads some of those next: the occlusion
counts, counter reports and event values, and the stamps the texture checks read. A frame's first submission is small
and runs right behind the last frame's large one, so the game went on while that one's callbacks were still running.
Measured in Hyrule Field with the camera turning (RTX 5090, lazy write-back on): 2,267 of 2,320 such waits returned
before those side effects had run; they were through 0.45 to 0.8 ms later on average, 12.6 ms at most, and in that
time 770 to 1,015 occlusion counts, 21 to 28 counter reports and 17 event values a frame reached guest memory. The
submission the game waits for wrote nothing back in any of 14 runs, so its own write-backs were never the matter.
A player saw a patch of grass near the camera change from frame to frame there and less of it with the fence's wait.
No scripted run showed such a frame with either wait, so the link to what the player saw is not shown.
The fence's wait takes 0.65 to 0.7 ms more of a frame there, about 6 % at 85 frames a second (single runs beside
other work). wb_split = 1 still gives the other wait, and 2 forces it with shadow storage.
NX2NAVI_TRACE=perf now counts what a wait on that timeline leaves behind and the completion thread's time by callback.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 4d108b706e72c001ddbe20608f06469885df584b)
A lost device used to end the process from whichever submit or wait noticed it first, while the present only logged it
and went on and the other threads kept calling the driver. The completion thread could take the submissions' timeline
as reached and run the callbacks of submissions that never finished.
vk_device_lost_check now takes the result of every submit, present, acquire and wait. The first thread to see the loss
sets a flag, writes the report and ends the process as a fatal error does (the log written, a save commit under way
finished), with an exit code of its own; later threads stop in that call, and a watchdog ends the process after ten
seconds should the first thread hang. The replay, its submit, the uploads, the present and the lazy fetch read the flag
and return without touching the device. The completion thread asks the device with a call of its own before a new
value counts and runs no callback once the flag is set.
The executable's --probe-devlost and tests/device_lost_check.py check this without a lost device, and
device_lost_at in nx2navi.ini ends a real run the same way.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Verified by runs in the audit: the Market's periodic stall (a pool slot was listed once per refresh pass instead of once; the list fell from 160,385 entries to at most 3,192 and no frame over 20 ms remained while standing), orderly exits delete the pipeline prebuild's running marker (left behind, the next start wrote a skip file and every later start skipped the prebuild), the log and crash report name an area a save asks for that the game does not have, and the menu atlas hash no longer overflows a signed multiply. The other fixes compile and pass the regression route but their faults were never reproduced: see AUDIT.md section 13 for each.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The two sides both made the wait after a frame's first submission cover the write-backs under shadow storage; the rule is kept in one place, vk_sync_wb_split.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
NX2NAVI_SHADOW_CHECK=1 logs with the shadow line, every 60 frames: the whole copy-ins that overwrote a store a
shader made through the device address table, and the pools they fell on; the write-backs that moved bytes into
a page the CPU had written since its copy-in; the bytes both sides changed since their base copy; what the
copy-ins cost by kind, and which pools and flag sets took them. The stores are found by content: a whole
copy-in leaves a hash of the page, and the next one compares the shadow page with it first.
NX2NAVI_SHADOW_TABLE_STORES=1 keeps such stores: a page found stored into gets a base copy, so copy-ins take
only the CPU's bytes, and the fence of every submission that uses the table writes the stores back to guest
memory. --probe-vkmem checks it with a GPU write that nothing notes. It is off by default. The overwrite it
removes was the suspected cause of the flicker on Linux and is not: standing outdoors (RTX 5090 with
NX2NAVI_SHADOW=1) it happens exactly four times a frame, on ten pages in pools of 20 and 44 KiB, with the copy
that precedes the frame's stores, and no frame came out wrong with it or without it in 1,800 frames each; the
hashes cost 1.8 ms a frame of the replay (67 against 75 fps); and a count the CPU resets before the write-back
has landed would keep counting, where the whole copy-in resets it every time.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With shadow storage (the Linux default) what the GPU wrote reaches guest memory in the fence's completion
callback, later than an import's store on the GPU. The wait after a frame's first submission returned at the
executed timeline, before that, so the game rewrote what those passes had written and the write-back then put
the GPU's older bytes back over the rewrite. The whole 3D scene came out brighter for single frames, each of
them a frame whose main work was held at its CPU event wait and replayed late.
Standing outdoors with NX2NAVI_SHADOW=1 on an RTX 5090: 695, 624, 443, 323 and 2 flashed frames of 1,800 in
five runs with the split, none in eight runs without it. The frame rate did not drop (74.6 fps median with the
fix; runs of the build before it gave 71 to 72). NX2NAVI_WB_SPLIT=2 keeps the split with shadow storage, to
measure the fault. That this is the flicker a player reported on Linux (RX 7800 XT, RADV) is not confirmed on
their machine; NX2NAVI_WB_SPLIT=0 gives 0.7.1 the same wait there.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With shadow storage (the default on Linux and under Wine) what the GPU wrote reaches the game's memory in the completion thread's fence callback, after the executed timeline that the split wait returns at. The game could then rewrite a pool, and an older write-back overwrote what it wrote: in Kokiri Forest a sky coefficient the game had reset came back, and the world flickered and looked washed out. The wait now covers the write-backs whenever shadow storage is in use; with imported or mirrored pools, the Windows default, nothing changes. The contributor's RX 9070 XT under RADV no longer showed the flicker.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Four "mem: sizes" lines give the entries and bytes of what no other line counted: the guest heap, physical maps, kernel region, lazily written ranges and the fixed kernel, setjmp, save-file, RomFS and zstd tables; pool records, mirrors, deferred destructions, upload and staging buffers, the device address table and the texture, sampler and slot caches; image views, descriptor spares, the completion queue, uniform snapshot arenas, recording copies and pins; and pipelines, layouts, stage libraries, job queues, the shader memory cache and the translator processes. Each subsystem reads its own counters under its lock; settings now count the replaced values they keep. Segment and scene lines say "-" for the world clock before it starts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The result of that read was not checked. After a device loss the value was taken as it came, the callbacks of submissions that never ran were called as if their work were done, and the game went on recording until the next checked queue call failed. That was an upload's, so two players' reports read as an upload fault.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With shadow storage (Linux, and Windows builds under Wine) a CPU-visible pool is a host-visible copy with
no memory object of its own, and only pools that owned one went into the device address table: pointers
the game's shaders read from memory reached nothing. Shadow copies are now in the table. A shader that
reads through the table resolves no pool, so nothing queued the pool it reaches for the copy-in: the part
is marked where its pipeline is drawn or dispatched (VkPipeInfo.gpa, vk_mem_gpa_use), and its prologue
brings the shadow of every pool in the table up to date with the CPU's writes and queues the same pages
for those pools' VRAM mirrors (vk_memory.c vk_mem_gpa_sync). --probe-vkmem reads a word through the table
from a pool that is never bound, before and after a plain CPU write.
Pull request #353 by TophC7, ported onto the base copies of the black-world fix:
- taken as it is: the table registration, the mark in vk_exec_draw.c and vk_pipeline.c, the prologue
call and vk_sync_probe_submit in vk_sync.c (two hunks merged by hand), the probe's test;
- written again: vk_mem_gpa_sync, on top of the snapshot-based shadow_sync_pool; a lookup no longer
queues a pool for being in the table, which every shadow pool now is;
- narrowed: the sync runs only with shadow storage. Without it (Windows) a mirrored pool stays unsynced
for the table's readers as before, so the frame there is unchanged, and the probe makes the source's
mirror only with shadow storage and skips when the device has no address table;
- the probe's shader was an array of SPIR-V words in tex_probe.c; it is now the source
runtime/shaders/gpa_read.spvasm, built like the other runtime shaders;
- the exact re-upload count in the texture probe stays checked on Windows.
Files other sessions are changing: runtime/vk_memory.c (vk_pool_init's registration, mem_resolve's touch,
the new section before vk_mem_use).
The Windows files compile and the shader assembles and validates; no probe was run, and nothing was run on
Linux here.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A review found a gap: a part checked what it had skipped at its end, and a fault between that check and the part's
hand-over to the queue fetched without the part's writes while nothing wrote them back afterwards. The replay now
opens a window from the check to the hand-over, per part, and a fault on an armed page waits for it to close (at most
20 ms; the replay thread's own faults and thaws do not wait and are counted). What a part skipped for a range that is
no longer armed goes back through the usual snapshot and merge, taken in that part's prologue, and not as a plain
copy, which would have put the mirror's words over what the CPU had just written there. A part split off earlier
makes the same check before its prologue. wb_lazy_touch is a test that reads armed ranges on purpose.
Dev build, Hyrule Field: 71.1 fps as before; standing, a fight, pause and unpause, and the touch test made 146 to 338
faults each, none inside a window, no fault of its own.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Every frame the render thread waited about 5 ms for the GPU after the frame's first submission, with the game
CPU-bound in every area. The wait is there so that the GPU has run that submission's passes before the game
rewrites what they read. But the submission also ends with the write-backs of what its shaders wrote, 60 MiB merged
into guest memory in 3 to 4 ms of GPU time, and the wait covered those too.
The write-backs now go into a part of their own. The part before them signals a second timeline, the executed
timeline, and the first-submission wait waits on that; the write-back part signals the timeline as before, so every
fence the game asks for still covers them, in the same queue order. wb_split = 0 keeps one part and the old wait.
Not measured in the game yet.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Generation is switched off for every menu, cutscene and frame without depth and motion, and on again after it. Off freed the generator's resources and on allocated them again inside the present, which holds the queue lock for its whole flip, so the submitting thread waited there: four of five slow frames profiled in a session with frame generation on had the log line "frame generation on" right before them and nothing else blocked. nx2navi_dlssg.dll now sets Streamline's retain flag, so off only suspends; whether frame generation runs is fixed for the run, and Streamline frees the resources at shutdown. The DLL has to be rebuilt (tools/build_dlssg.py).
The wait for the queue lock in vk_sync.c queue_submit is counted as a present wait, so a frame held up by a slow present no longer shows in the slow-frame line with every blocked time at zero.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 94a0da9f7694cfe4d65777f9efe8eff837ba2bc8)
A session with per-pass GPU timestamps showed the game's own render passes and compute dispatches at 1.6 to 2.3 ms of GPU time a frame while the perf line's GPU time was 7.7 to 13.5 ms: most of the frame's GPU time is in commands the replay records between the marks, and nothing said which.
The timed frames now also get a timestamp at the start and the end of each part of a submission, and every stretch between two marks (or a mark and the part's edge) is a gap. The replay names the kind of commands it records in a gap: buffer and texture copies, fills and clears, the temporal upscaler, write-back merges and copies, depth twin copies, the texture pool marks, the mesh draw counts and block-compressed target copies, each with a size where it has one. The report adds the gaps' time per frame summed by the kinds noted in them (a gap nobody noted holds barriers and state only), the parts' own time for comparison with the perf line, and each kind's count and size per frame. Nothing runs outside the timed frames.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
lock_time (NX2NAVI_LOCK_TIME) makes the replay threads time each lock they have to wait for, kept per asking site (platform.h plat_lock_timing, plat_mutex_lock_at and plat_rmutex_lock_at carry the site), and the frame-time summary lists the sites with the most wait, the recorder's full-ring and drain waits, and the texture lock's holds over 1 ms with the code that took it. replay_time now also keeps each frame's replay ops: a frame over 25 ms charged to the replay says how many draws, binds and transfers it replayed, their time, its slowest op, and how much of the replay's wall time the thread was on the CPU. NX2NAVI_PROFILE_REPLAY=1 samples only the replay thread without call chains, and the profiler now follows the thread that replays instead of the one that started the back end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Performance: draws reuse the bindings that did not change and record only the dynamic states that differ from what
the command buffer holds; small uploads come from a staging arena; finished submissions are held briefly and handed to
the queue in batches; the recorder thread can keep a CPU core of its own; ASTC block-linear textures are deswizzled on
the GPU; dynamic resolution steps the upscaler mode to hold a frame-time target. Each has a setting in nx2navi.ini
(bind_reuse, dyn_delta, stg_arena, submit_batch, recorder_core, recorder_prio, astc_gpu_deswizzle, dyn_res) and the
staging cache now frees what it holds at shutdown.
Capture: NX2NAVI_DUMP=key saves the frame after each press of Insert, with mesh draws listed by task, mesh and fragment
shader, depth test and face culling, and mesh_prims.txt giving each mesh draw's primitive, clipping and fragment counts.
All of it is off unless NX2NAVI_DUMP is set.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A mirror prologue is closed after the part it was made for but runs first on the GPU; its timestamps were read in the wrong order, so its copies counted as idle time with work queued. ts_submitted now queues the reads in GPU order, and the perf line shows the copies on their own. From a tester's fixes: in Kokiri Forest at 4K on PCIe 3.0, 7.1 of 20.4 ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Opt the process out of Windows power throttling (execution speed and
timer resolution) at startup; NX2NAVI_POWER_FULL=0 turns it off.
- Fence completion thread wakes waiters before collecting freed memory,
so collection no longer delays them.
- Add a by-region barrier when a draw or clear writes an attachment that
an earlier draw in the same pass sampled; count it and inline uniform
updates in the per-frame stats.
- Hash small texture contents at upload and skip re-uploads whose bytes
are unchanged (removes ~420 redundant uploads per frame in Kokiri
Forest); NX2NAVI_TEX_SAME=0 turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each file that contains copied code names its copyright holder and license and points at THIRD_PARTY_NOTICES.md; zlib code keeps its full notice and the mark that it was altered. Comments and probe text only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>