Commit Graph

15 Commits

Author SHA1 Message Date
tangerineturtle1
48b71a630d Jitter DLSS's scene on Ocarina's frame, with the shading draws against the copied depth jittered too.
Jitter was off on Ocarina because with it the ground and characters went white within seconds. The cause: the game draws its depth pre-pass into the scene depth, copies it into a second image of the same size, and shades the same geometry into the light target against the copy with the depth test EQUAL. Only the draws into the first image took the jitter, so the shading draws compared unjittered depth with jittered depth, EQUAL failed on nearly every pixel, and the light target kept its clear colour. Frame dumps with and without jitter show the shading passes darkening the light target from a mean of 133 to 13 without it and leaving it at 112 with it.

On Ocarina's frame every draw that projects through the camera (it binds the scene context at c3) into a D32F depth of the scene's size now takes the jitter, and full-screen passes drawn with a scene depth attached do not: the bloom composite DLSS reads would otherwise move the picture by the jitter a second time. The viewport is recorded again whenever a draw's jitter differs from the last one recorded. Jitter is on for Ocarina by default (dlaa_jitter = 0 still turns it off), and the DLAA log line counts jittered frames and draws.

Checked in Hyrule Field with the camera turning: the picture's brightness matches the run without jitter (mean 33 to 63 against 35 to 60; 144 to 188 before the fix), and in 20 motion-vector checks the warp error is lowest with the jitter applied as DLSS is told it (0.032 to 0.077), against 0.076 to 0.141 with its sign flipped and 0.059 to 0.106 left out, still cameras included: the scene moves by the jitter of that frame, in render pixels.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 15:09:16 -05:00
tangerineturtle1
e1cb6301ab Give frame generation and FSR the scene's own near and far planes, field of view and units.
DLSS frame generation (Streamline and the NGX path) and FSR 3.1 and 4 upscaling and frame generation were told the depth came from a camera with near 0.1 and no far plane. Ocarina's projection has a finite far plane that changes with the camera: in Hyrule Field its z row is (-1.00001, -0.200001), near 0.1 and far about 25,000; the camera before it had far about 1,000. With the far plane taken as missing, a surface 10,000 units away was read as 16,650. The planes, and whether the depth is inverted, now come from the frame's projection and the device's depth mode every frame (vk_dlaa.c proj_planes), with one log line when they change. The stored depth is already 0 near and 1 far: the -w..w clip depth the pipelines keep maps to exactly what a 0..w projection with the same planes stores, and a frame dump's scene depth spans 0.975 to 1.0.

FSR's contexts lose their infinite-depth flag and take the far plane from each dispatch. FSR frame generation now gets the camera's field of view instead of a fixed 1 radian, and the upscaler gets it too (its caller passed 0). The view's units are metres, not the centimetres FSR was told: the camera orbits Link about 4 units behind him at about 3 units a second.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 15:09:15 -05:00
chrg6
449b5f73b0 Merge the Linux pull requests into the 0.7.0 release line.
Eighteen commits, one per Linux pull request that was not in yet: the build fix for a source checkout, NVIDIA's shader
disk cache only with NVIDIA's driver, tools/run_game.py for a Linux game folder, a memory limit the low-memory handling
can read, the recording thread's core on Linux, shadow storage on Linux and Proton, the Steam Deck profile and prompts,
FSR 3.1 offered only where its library loads, DLSS frame generation through NGX on Linux, the AppImage with its window
and its workflow, and the processor level from /proc/cpuinfo. Two conflicts: the settings table keeps the area-load
settings under the new comment, and the example file keeps the lazy write-back as off by default and adds that it
stays off with shadow storage.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 07:31:55 -05:00
chrg6
eb2608296b Generate frames with DLSS on Linux through NGX itself: 2x to 6x or dynamic, switched while the game runs.
DLSS Frame Generation went through Streamline, which only the Windows build has, so framegen = dlss did
nothing on Linux. There it now calls NGX's frame generation feature directly (vk_dlaa.c vk_ngxfg_*), with
the depth, motion vectors, jitter, camera and HUD-less picture the Streamline path gets. With it on, each
frame is composed into an image of its own instead of a swapchain image, the generated frames are made at
the end of the frame's command buffer, and a presenter thread shows them and then the rendered frame, each
copied into a swapchain image it acquires itself, spaced over the time between rendered frames
(gfx_present.c ng_*). fg_mult is the multiplier: 2 to 6, or dynamic for only the frames the display's
refresh rate needs. NVIDIA's libnvidia-ngx-dlssg.so.<version> goes beside the game; it is not in the
repository or any kit.

Pull request #124 by spidercraft. Its base was the present path of 0.5, so it is ported by hand:
- taken as written: the NGX calls and the presenter (the block is lifted from the pull request's diff);
- wired again into present_image, create_swapchain, the output rate and the HUD-less picture as they
  are now, with every new branch behind vk_ngxfg_wanted, which is 0 in the Windows build: the code is
  compiled there and never reached;
- added: frame generation's feature and parameters are released before NGX shuts down, the presenter's
  images, semaphores and command pool go when the device is released and are made again for a new one,
  and a failed submit on this path settles its fence without an acquire semaphore;
- the menu: the Frame generation row follows the setting at once on Linux and says "after restart" only
  when the game started without DLSS upscaling; the multiplier row lists what the GPU allows and Dynamic;
- the overlay row of the pull request it builds on (#123) is not part of this.
It touches vk_dlaa.c, which another session is changing: one field in N, the FG state after it, one FN
line, the instance extension query, the capability read in vk_dlaa_init, the release, and a block appended
at the end.

Known gap, as in the pull request: on this path fps_limit counts the frames the game draws. The Windows
files compile without new warnings; nothing was run, and the Linux path is not compiled here.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 06:45:59 -05:00
chrg6
d985e0ecb0 Offer FSR 3.1 in the Screen tab only where its library can load.
On Linux the Screen tab listed the five FSR 3.1 upscaling modes and AMD's frame generation, but only the
Windows build loads amd_fidelityfx_vk.dll: a player who picked a mode got the scene at the mode's share of
the picture with nothing to scale it back up. vk_ffx_available answers from the load's result once it ran,
and before that from the library file being there, so the menu can ask every frame. Where it says no,
the menu lists neither, a mode that is still set shows "in use: off", the scene keeps the game's own
share (vk_dlaa_fsr3), frame generation keeps the plain swapchain with one log line, and the texts name
what does run.

Pull request #371 by mooki000, taken as it is; two hunks merged by hand (vk_fg_wanted, which now also
stays off after a failure, and a README line that had gained Texture filtering). It touches vk_dlaa.c,
which another session is changing: vk_dlaa_fsr3 gains the availability test and one log text changes.

On Windows the menu changes only where the DLL is missing. The Windows files compile; nothing was run.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 06:33:22 -05:00
chrg6
91a8da9eb3 Keep the previous picture on screen over the first frames after a DLSS or FSR 3.1 mode change, which came out dark or black.
Picking a mode in the settings menu changes the scene's size. The game makes its scene targets again at that size and
they start empty, and the first frames drawn into them are wrong: the first frame of the new size is lit without what
the frame before it left (a dark scene), and two frames later the scene can be black with the interface intact (seen
going to Ultra Performance and to DLAA). Captured over six scripted mode changes with every present saved: bad frames 3
and 5 presents after the change, the same with the lazy write-back on or off and with the frame hold off.

vk_dlaa.c notes a scene of another size within 60 presents of a settings change, and vk_backend.c frame_hold then
leaves out 6 presents from that frame on, once per change and beside the allowance for frames with skipped draws. This
hold also runs with DLSS Frame Generation on (the other one does not): a present left out is a longer gap between two
rendered frames to it, and a dark frame it is given comes out as several generated ones. frame_hold_ms = 0 turns both
off. Checked on a dev build with frame generation at 4x: the hold starts at the first frame of the new size at all six
changes and covers every bad frame of the capture, with no new Streamline error.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 06:05:29 -05:00
chrg6
22103a57bf Merge main into the test line: the pull requests taken there and two render target fixes.
Main brought the fixes of eleven pull requests (the texture pool set sealed when an early replay part is submitted, every location reflected in interface arrays, RGB9E5 texels recognised for integer storage views, the upscaler a frame started with kept, GPU pass timestamps without vendor breadcrumbs, the Linux build, window and NGX fixes), render targets released when drawn over at another address, the vertex layout kept in the pipeline on newer AMD drivers, and the upscaler choice read once per evaluation.

Four hunks conflicted and take both sides: pool_sync returns for a sealed set before the per-frame creation budget's clock (vk_exec_draw.c); make_module keeps the test line's early_ok argument and main's module hash (vk_pipeline.c); a texture taken back counts as sampled again and records how long it was away, and the texture line logs the disuse counters and the overwritten render targets (vk_texture.c).

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-09 21:10:23 -05:00
Michael Schienbein
033bf85625 Release Linux NGX before destroying the Vulkan device 2026-11-09 20:51:06 -05:00
chrg6
8e656b85a4 Hold less video memory in empty space: smaller VMA blocks, spare blocks only where textures grow, a smaller ASTC scratch, and DLSS features freed once unused, with a VRAM breakdown in the perf log.
VMA's blocks on large heaps are 64 MiB instead of 256 (vma_block_mb): one session held 2.1 GiB free inside the
device blocks beside 8.2 GiB of allocations after a few area changes, and the driver counts a block whole until it
empties. The headroom thread keeps its spare block only for the device-local types textures and mirrors grow in; the
spare blocks it made for the host types and the PCIe BAR type at boot stayed empty for the whole run. The ASTC
decoder's scratch is 32 MiB, so it stays inside a block, and an area load that makes one per upload batch holds half
as much at once. A DLSS feature no frame used for 3600 evaluations is freed with its work images, and a model change
now frees all five sizes.

The perf log gets a "vram by use" line (textures, released textures, mirrors, physical pools, ASTC scratch, headroom
spare, free space inside the blocks, memory outside VMA and DLSS's own share), the free ranges per memory type, the
addresses whose duplicate texture entries hold the most, and a line when memory outside VMA moves by 256 MiB.
astc_bc_probe in nx2navi.ini turns on the ASTC opacity probe.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 99cfc2fa14ae208b7b23e057ff9b87986cd6a5e0)
2026-11-09 14:56:17 -05:00
epicmeme546
778c55777d Say a restart is needed only when one is, and drop the line under Preparing shaders.
The Upscaling row no longer carries "DLSS on or off: after restart". It shows "after restart" only while the upscaler picked cannot start in this run. Frame generation says so only for a change to or from NVIDIA's, since AMD's applies at once, and the HDR row no longer says it twice.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 04:29:01 -05:00
chrg6
501d5bd084 Release pass: fix crashes, freezes and races, cut VRAM use, and translate more shaders.
Crashes: the render-target heap (HeapDef DynamicTextureAllocatorMem and its parent) grows with the widescreen
picture, so the pause menu no longer reads a null block at 5120x2160; texture uploads keep the game's memory mapped
while they copy it, so UnmapPhysicalMemory no longer pulls it away mid-copy; DLSS Frame Generation no longer crashes
in Streamline's set-up (physical devices and the window surface go through its proxies, its swapchain images are
counted first, resources are tagged per frame); a stale core-wait target is cleared before its thread is freed.

Freezes and races: a resize during a swapchain rebuild is kept, a failed frame generation swapchain is retried
instead of replaced by a plain one, three acquire timeouts in a row rebuild the swapchain, device waits take the
queue lock, a translator child that stops answering times out, an in-flight compute pipeline builds at normal
priority, a save Commit started before the window closes finishes and none starts after, a settings change just
before closing is saved, and a movie sample taken before a flush is dropped.

HDR: Enhanced HDR extends the game's own tonemap so highlights go above the picture's white (the hue slider,
which no longer applies, is gone from the menu); frame generation gets a HUD-less picture, the HDR flag and the HDR10
metadata under HDR too.

Memory: ASTC textures are encoded to BC3 unless the PC has 20 GiB of VRAM and 48 GiB of RAM, as Windows charges video
memory to the commit charge (a long session held 17 GiB of RGBA8 textures and 45.7 GiB of commit on a 32 GiB PC).

Shaders: the translator lowers spill-mode programs with more than eight uniform register groups in a wider spill
layout, and local loads and stores with a uniform-register address (36029 of the game's 36031 variants translate,
20 failed before).

The launcher release ships the shader tools and AMD's FidelityFX library (make_launcher.py --ffx); windres there gets
the toolchain on PATH.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 16:02:30 -05:00
chrg6
b9a042969e Keep the HUD out of frame generation, show the frame generation rate, and start DLSS Frame Generation.
Frame generation now gets the picture without the HUD each frame: the upscaler's output before the HUD is drawn over
it, encoded to sRGB as the game's last pass encodes its picture and put through the same colour, scaling and borders
as the presented frame, so it tells the HUD apart and leaves it unwarped in the generated frames
(NX2NAVI_FG_HUDLESS_SHOW=1 shows that picture, a test). The performance overlay gains an FG row and the fps line the
display's rate, generated frames included. The device enables VK_KHR_get_memory_requirements2 whenever AMD's frame
generation is on, which crashed at start with DLSS upscaling.

DLSS Frame Generation through NVIDIA Streamline (vk_dlssg.c, and nx2navi_dlssg.dll from runtime/dlssg, built with
MSVC by tools/build_dlssg.py against the SDK kept outside the repository) creates the instance and device through
Streamline's proxies and calls its swapchain hooks; Streamline still fails in its plugin start-up here, so the menu
lists it only while it is set.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 13:31:07 -05:00
chrg6
7c11ff6816 Add AMD FSR 3.1 frame generation: a generated frame between every two the game draws.
With Frame generation set to AMD FSR 3.1 (after a restart), AMD's frame generation swapchain takes the place of the
present path's own: the device creates two more graphics queues for its presents and image acquires, the present
path acquires, gets images and presents through its replacement functions, and every frame configures generation
and records its preparation from the depth and camera motion vectors the DLSS or FSR 3.1 upscaling pass made (one of
them must be on). Generation pauses while the menu is open. On an RTX 5090 at a 60 fps game, about one frame was
generated for every frame drawn in play.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 13:31:06 -05:00
chrg6
ca5e5eb5a4 Add AMD FSR 3.1 upscaling, and run DLSS's smaller modes on a 16:9 picture too.
The Upscaling choice gains FSR 3.1 Native AA, Quality, Balanced, Performance and Ultra Performance. FSR 3.1 runs
through AMD's signed amd_fidelityfx_vk.dll (loaded at run time; the build kit ships it) in DLSS's place, on the same
scene light, depth and camera motion vectors and at the same render scales. Its Vulkan back end needs
VK_KHR_get_memory_requirements2, which the device now enables when FSR 3.1 is chosen.

A half-size effect pass with three targets and a half-size depth was taken for a G-buffer, which switched every later
frame to the deferred frame shape: there the output pass of a smaller scene was never found, so DLSS Quality,
Balanced, Performance and Ultra Performance did nothing on a 16:9 picture. Such a pass smaller than the scene is now
left alone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 13:31:06 -05:00
Valiantsin Dzerakh
0478c13e45 Import the base tree (MIT, see LICENSE) 2026-11-07 05:04:38 -05:00