Commit Graph

200 Commits

Author SHA1 Message Date
chrg6
95dc476ee7 Scale the scene with the edge-adaptive filter where the game's own upscaler ran.
The stand-in for the game's upscaler enlarged the scene with a linear filter, which is softer than the console's picture. It now enlarges with the edge-adaptive filter the present already scales to the window with: the same shader, built a second time with a constant set so it squares what it filtered, as the linear pass does. The stored square-root values are filtered as before and the decode is the same. standin_filter = bilinear brings the linear pass back, and the setting is live. The linear pass also stays where nothing is enlarged and while DLSS or FSR 3.1 runs, since that upscaler scales the scene itself and its picture goes over the stand-in's. The movies do not go through this pass and are not changed.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:16:18 -05:00
chrg6
495d118e9e Add an experiment that turns the game's occlusion queries off, off by default.
The new patch set occlusion_off makes six reads of two parameter bytes read 0: CreateZPrePassOcclusionQuery and CreateSamplesPassedQuery, where the game first writes their options and where an update compares and stores them. The game is then left without its occlusion queries, their reports and the conditional renders that depend on them, and draws what it would have tested: more draws, and no query results to wait for.

patch_occlusion_off = 1 turns it on at the next start. The key has a row in the settings table, which gives the set its default, a section and an entry in nx2navi.ini.example. What it costs and saves in play has not been measured.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:13:30 -05:00
chrg6
cc0b467a2c Gather the log lines of a quarter of a second and write them at once.
The log thread wrote as soon as it woke, which outside a burst is once for every line: each line woke it and was a write of its own to the log file and the console. It now waits a quarter of a second from the first line it finds, or until the queue is half full, and writes what was queued by then at once, so the log is up to that much behind the game. What is being gathered stays in the queue, so a fatal error, a crash report and an exit write it out before their own lines as before; a game ended from outside loses those last lines. The queue's test checks the gathering, the half-full write and that a process which ends at once, by an exit or as a fatal error does, leaves every line in its file.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:12:51 -05:00
chrg6
91dd6de969 Make a draw whose shaders write memory wait for its pipeline like a one-shot draw.
A draw into targets the game renders every frame is left out while its shaders or pipeline build, because the next frame draws it again. A storage buffer the shaders write or an image they store into is not redrawn that way: with the draw left out, that memory keeps what it held for everything that reads it. Such a draw now takes the wait a draw into one-shot targets takes, from the frame's wait pool, and is skipped only at the end of it. Only the stages already translated can say that they write; a draw whose writing stage is still being translated is skipped as before. draw_writers_wait = 0 turns the rule off, and the periodic line about waited draws counts the draws that waited by it alone.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:12:51 -05:00
chrg6
e6392f381f Turn Link's own motion vectors on by default.
DLSS, FSR 3.1 and frame generation get the real motion of Link and his equipment unless selective_motion = 0 is set. Its two status lines come every minute or two instead of every two seconds, now that every session writes them.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 14:38:26 -05:00
chrg6
26f3dc47ec Show the low-end GPU mode's settings under its switch in the Game tab, and read them only while the mode is on.
The settings had a tab of their own; they are rows of the Game tab now, listed under the switch once the mode is on after a restart, and the tab is gone. With the mode off every one of them reads as unset, whatever nx2navi.ini or the environment says, so nothing of the mode acts unless a player turned it on; the build reads guest_opt the same way. The notes describe that, and take the white edges in towns and the dropped textures from the known issues to the fixes.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 13:59:43 -05:00
chrg6
d2fbaba1c3 Put the low-end GPU mode in the settings menu's Game tab, marked experimental.
The row sets low_end_gpu, read at start, and says what the mode turns on and that it was measured on one card; its text is there in the menu's four languages. The key is decided again once the settings file is read.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 13:06:02 -05:00
chrg6
2324a74602 Turn the settings for older graphics cards on with one key, low_end_gpu = 1, and leave them off without it.
Mesh shaders as compute, the texture that gets memory of its own, staged mirror uploads and the shorter wait for the GPU, widened write-watch queries, the video memory limits and reserve, early upload batches, the asynchronous replay, the hot-pool rule and the recording thread on AMD cards without mesh shaders were measured on a Radeon RX 580 and run on no other card. Each keeps what 0.9.1 did unless the key or its own setting says otherwise; the key gives the defaults the way the device profile does. The notes describe them as that option, hold main's two new entries in one Changed section, and list the white edges in towns as a known issue.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 13:00:13 -05:00
FIocker
58efccd883 Scale the slope-scaled depth bias with the shadow map scale, so the larger maps keep the bias the game asked for.
The slope term is a bias per unit of depth slope across one pixel of the target. A shadow map made k times larger on
each side (shadow_scale 2 to 4) has 1/k of the slope across each texel, so the game's factor alone gave k times less
bias on sloped surfaces than at the game's own size, which is what shows as acne. vk_exec_draw.c slope_bias
multiplies the factor by the pass's scale for both the direct draws (record_fixed) and the queued mesh draws; the
constant term counts the depth format's smallest steps and keeps its value. Nothing changes at shadow_scale 1.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 12:39:53 -05:00
chrg6
0533b3028e Keep the asynchronous replay, the hot-pool rule and the -O2 game code off unless a player turns them on.
The three change what every card does: the asynchronous replay can show a dark or flickering frame now and then, the hot-pool rule moves pools into system memory on every discrete card, and -O2 makes each rebuild of the game several times longer. Their rows stay in the settings tab. The USB joystick mapping is described by the device's own name, and the tab's introduction says what its settings are for.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:17:55 -05:00
chrg6
a464ffafbc Merge Tobim6's work for older graphics cards: mesh shaders emulated with compute, video memory kept within the heaps' budgets, staged mirror uploads and the submit wait that goes with them.
Conflicts: the settings key lists take both sides; frame generation keeps the camera-cut handling and logs its counters every 600 frames with the cuts among them; the pass-time mark moves into draw_viewport; mo_desc keeps the pose depth and notes the reader.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:14:58 -05:00
Vasilis Manetas
5fee8d7ab2 Hand every queue submission to the driver's own submit thread on Linux, so RADV's vkQueueSubmit2 leaves the replaying thread.
Mesa's Vulkan drivers keep timeline semaphores as kernel sync objects, and their queues submit on the calling thread unless a submission waits on a value not submitted yet. The replay hands a part of the frame to the queue each time it splits one off (vk_exec.c maybe_split), so every such vkQueueSubmit2, with the command stream's checks and the kernel's ioctl, ran inside the replay, the thread that limits the frame rate on an RX 6800 XT under RADV.

MESA_VK_ENABLE_SUBMIT_THREAD=1 sends every submission to a thread of the queue's own. vk_device.c mesa_submit_thread sets it before any thread can load the driver, unless the environment sets it already. submit_thread in nx2navi.ini (NX2NAVI_SUBMIT_THREAD) is 1 by default on Linux and 0 on Windows; 0 leaves the driver's own choice. On a Mesa driver the log says which one applies.

Kokiri Forest, 0.9.1, RX 6800 XT, Mesa 26.2.6, 3 pairs of 45 s runs of one build with the setting on and off: the replay took 13.9 ms a frame against 15.0, lower in every pair; frames over 25 ms fell from 910 to 406; the frame rate went from 40.0 to 40.8 fps, within the runs' noise.
2026-11-12 12:07:19 -05:00
chrg6
8946fc0201 Leave Link's own motion vectors off until they have been played, and take their settings through nx2navi.ini.
The pose motion vectors for Link and his attached equipment were on by default for game 1.1.1 and had not been run in
the game on this version. selective_motion = 1 turns them on. Its settings are listed among the known ones, so
nx2navi.ini takes them without an unknown key line, and the rotation threshold is read through the settings instead
of from the environment alone. nx2navi.ini.example describes the switch.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 10:44:12 -05:00
Tobim6
9259149527 Settings menu: a Lama patches tab with the settings of the RX 580 patches
Released textures kept, top texture levels left out, hot pools in system memory, the heap limit, the upload batch
limit, the kept ASTC buffer, mesh emulation and its arena and task records (greyed where the GPU has mesh shaders),
the overwritten-texture fix, the vector index fix, -O2 game code, pass times and the frame dump key. Each key gets a
row in the settings table; make_game.py reads guest_opt from nx2navi.ini when the environment does not set it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 16:22:31 +01:00
Tobim6
1534dc570a Mesh emulation: size the task records from the arena, and log what each submission asked for.
The task records were a fixed 4096 per submission (3 KiB each): a dense patch of grass that launches more task
workgroups in one submission lost the rest silently. Their count is now a push constant (NX2NAVI_MESH_EMU_TASKS,
default 16384) and the arena defaults to 256 MiB. The header counts what the stages asked for past the capacities too;
before the counters start over they go to a readback ring, and the perf line reports the most one submission used of
the vertex slots, indices and task records, and the mesh workgroups that did not fit. The first draws the emulation
skips are logged with the reason.

(cherry picked from commit 81cfd91bf468f13e4debf287d080f96637a4c382)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 16:22:05 +01:00
Tobim6
aec5b5a840 Emulate mesh shaders with compute on GPUs without VK_EXT_mesh_shader (NX2NAVI_MESH_EMULATION, off by default).
Without the extension every mesh draw was skipped ("mesh draws need VK_EXT_mesh_shader: skipped"): on an RX 580 the
game's grass and foliage were missing. The translator already builds each task and mesh program as compute code that
MeshSpirv.cs wraps into TaskEXT / MeshEXT modules; runtime/mesh_emu_spirv.c turns those modules into GLCompute ones:
outputs and payload move to workgroup memory, SetMeshOutputsEXT's counts are kept, and the entry function's end
reserves vertex slots and indices in an arena with atomics and copies the vertices and triangles out (task: the payload
and the mesh group count go to a task record, and the mesh dispatch to the draw record). A generated vertex shader
reads the vertices back for the game's fragment shader. Checked with spirv-val (Vulkan 1.3) on the 1016 task and mesh
programs of Ocarina of Time 1.1.1: 1008 convert and validate; the 8 point-list meshes stay unemulated.

vk_pipeline.c gives an emulated mesh pipeline a layout whose task and mesh bindings are visible to compute, with push
constants and a compute-side descriptor template, builds the generated vertex shader's graphics pipeline and the two
compute pipelines; vk_exec_draw.c prepares each mesh draw as before, then outside the pass zeroes the arena counters
(first emulated draw of a submission), fills a draw record, pushes the same descriptors to the compute bind point,
dispatches the task and mesh stages (direct, or from the indirect ring entry) and draws DrawIndexedIndirect from the
record. mesh_emulation = 1 turns it on; mesh_emu_mb sizes the arena (160 MiB).

(cherry picked from commit efc43b177694d8f8ce5700fcf28d80e889a45589)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 16:22:03 +01:00
Tobim6
4ba78a7b31 Add NX2NAVI_MIRROR_HOT: pools copied through their VRAM mirror every frame go back to system memory.
On an RX 580 with the scene at 854x480 the render passes take 11 ms of a 32 ms frame. The rest is the mirrors: 66 MiB
of CPU-written pages up and 76 MiB of compute-shader writes back each frame, mostly through six 6-16 MiB pools the game
refills every frame, with the GPU idle 7.8 ms a frame while those copies wait. With mirror_hot = N a mirrored pool whose
uploads, write-backs and merges average N percent of its size (and at least 1 MiB) a frame over 120 frames leaves the
mirror at the start of a submission: it comes off the mirrored list, the device address table points at the imported
buffer again, and the mirror buffer is freed after the next submission. Default 0, off.

(cherry picked from commit 82e5dcb682375fa48bbaffa1d61f825272544e36)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 16:21:56 +01:00
chrg6
518d55ed07 Draw lines as wide as the game sets them.
The game's line width was dropped at the call and every line drawn 1 pixel wide; the game draws two lines a frame at 4.5 pixels into a 144x144 mask. The width is now recorded with the draw state and set as dynamic state for draws of the line topology class, held to the device's range. Only pipelines of that class list the new dynamic state, so the others keep their entries in the pipeline caches and the driver's. line_width = 0 draws every line 1 pixel wide as before.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 09:31:04 -05:00
chrg6
ef3466ce4f Merge main into the 0.9.1 release: the launcher's Mods screen, the anti-aliasing choices beside FSR and DLSS, and the scene's last row and column filled before an upscaler reads it.
The 0.9.1 notes keep the release branch's text and take main's sections: New, the edge line under Fixed, and Changed.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 09:00:37 -05:00
chrg6
baad032500 Keep the fast link's waits at 3 ms a pipeline and 6 ms a frame.
The 8 ms and 16 ms tried in their place left fewer draws out in a scripted walk, but in play a frame that takes 10 to 14 ms longer felt worse to the player than one that is left out, in two sessions on the same install. The wait stays counted once for each pipeline, and a frame that has left a draw out already still waits for nothing more.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 08:49:26 -05:00
chrg6
9f7c8ae810 Wait 8 ms once for a pipeline met for the first time, and carry the compute variants in the pipeline list.
A draw that met a new pipeline waited 3 ms for its fast link, in every frame, which is just under what the link takes with the stage libraries in the driver's cache: in a first-visit session on a new install 66 of 87 such draws gave up at the end of the wait and their frame was held back. The wait is now 8 ms for each pipeline, counted from its first miss and shared by all its draws, and 16 ms for a frame, so a pipeline the driver has to compile costs one frame the wait and the frames after it nothing.

The pipeline list tool also takes the compute variants a game folder dispatched, which no pipeline record names and which were translated in the middle of play, and reads a list made before as one of its inputs.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 08:25:42 -05:00
epicmeme546
1c654ba0c1 Let the Anti-aliasing row's Game SMAA, Off, FXAA and SMAA run together with FSR 4, FSR 3.1 or DLSS, and show the anti-aliasing in the performance overlay.
Choosing one of them while a temporal upscaler was set turned the upscaler off, and the picture fell back to bilinear scaling. vk_aa.c no longer keeps the game's SMAA while DLSS or FSR runs. The chosen pass replaces the game's composition as without them: in the native modes after the upscaler, and in the scaling modes before it. In the menu, a choice leaves the upscaler and frame generation alone, and the row notes that the upscaler's TAA runs too. Picking DLSS or FSR under Upscaling keeps the Anti-aliasing choice. The TAA entry, listed while no temporal mode is set, now sets FSR 4 Native AA where FSR 4 runs instead of forcing FSR 3.1. The overlay gets an Anti-aliasing line under Upscaling, for example "TAA + SMAA (Ultra)".

Checked on an RX 7900 XT in Hyrule Field with FSR 4.1 Native AA and Quality, and with FSR 3.1. The log has "the game's SMAA replaced by" smaa, off and fxaa while FSR 4.1.2 upscales, and the pictures are right.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 08:23:25 -05:00
epicmeme546
89c453d7bb Add a Mods screen to the launcher and build the mods' code patches into the launcher's game.
Mods, on the home screen, opens the game's mods folder, adds a downloaded mod from its .zip, .7z or .rar file or its
folder, switches each mod on or off, and sets the load order (mods_disabled and mods_order in nx2navi.ini, written as
the game writes them). Each mod's description says what it changes, which other mod changes the same files and which
of the two wins, and why the game leaves it off when it does.

Before the game starts, Play puts the mods folder in order (launcher/mods.py prepare): an archive in it is unpacked into
a folder of its name and kept, a mod whose files sit a folder or more down has them moved up, and a romfs, exefs or
cheats folder put straight into the mods folder becomes a mod of its own. An archive that would write outside its
folder is refused, and nothing is deleted.

The launcher's build (tools/make_game.py) left the mods' code cheats and ExeFS patch files out, so those mods stayed
off. The lift now turns them into patch sets first, as the setup does, with the files in the lift's key and
build-cache/mod-code.json recording what it took up. Play builds the game again before it starts when an enabled mod
brings code no build has seen. The shaders' key names the lift and the compile without the mods' code, so such a build
compiles only what the patches change and leaves the shaders prepared. tools/mod_files.py is the one place the tools,
the build and the launcher find a mod's parts.

Tested: a zipped mod holding its own folder, put into a mods folder, was unpacked and moved up by the launcher's code,
and the game served its file in place of the game's. The lifter took a code cheat and a pchtxt patch made for the game's
main as patch sets. The launcher's and the setup's tests pass.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 08:11:57 -05:00
chrg6
d31c3a1036 Make the water corrections in the runtime, on by default, instead of loading replacement modules from a folder.
The coordinate pair and the absorption guard needed modules made on each PC by tools/projective_recipe.py and a folder named in NX2NAVI_SPV_OVERRIDE, so no player had them. runtime/spirv_water.c makes the recipe's edits on the translation in memory, in the recipe's order: on the NVIDIA profile its three modules are byte for byte the recipe's (RTX 5090, game 1.1.1). vk_pipeline.c keeps the edited modules in a small table, made at first use, and builds a pair from them only when both of its stages were made; a module of another shape is built as it is, with a log line. NX2NAVI_WATER_PROJECTIVE=0 turns the corrections off. tests/water_projective_check.py compares the runtime's edits with the recipe's on made-up modules.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 07:55:57 -05:00
TheShinySylveon
0cb2e6f00a Reserve no core for the recording thread by default
On an i9-14900KF (8 performance and 16 efficiency cores, 32 logical processors), with the replay on its own thread,
the core NX2NAVI_RECORDER_CORE=auto reserved (logical processors 14 and 15) left the woken replay thread unscheduled
for about 200 ms roughly once a second while the game stood in Kakariko. During each stall its queue held 40 to 50
items, its lock was free, the wakes had been sent and it used no CPU time, while a game thread waited on a fence of the
work in that queue: 27 frames a minute had a 150 ms or longer frame. With NX2NAVI_RECORDER_CORE=0 the same minute had
none. The default is now 0; auto and 1 still reserve the core, and the log says when none is reserved.
2026-11-12 07:12:41 -05:00
chrg6
2f39b27fb6 Record the draw replay on three replay workers by default, and start the draft notes after 0.9.0.
replay_workers = 0 records everything on the submitting thread, as before.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 06:20:05 -05:00
chrg6
6ccd1e224d Build the shared pipeline list before play on every start, and build every listed pipeline at install.
A new install met every pipeline in play: in Hyrule Field one 600-frame stretch of a first visit had 1,769 draws wait 461 ms in all for pipelines, the longest frame 88 ms. The boot now reads seed-pipeline-keys.bin, the release's list, as recorded pipelines after the install's own (keys_open_seed, NX2NAVI_PIPE_SEED, default 1): their pairs go into the vertex output unions and the prewarm builds them as it builds the install's. The preparation builds every listed pipeline (NX2NAVI_PREPARE_PIPELINES now defaults to all), with the unions of the same list, so the first boot of a new install finds them in the caches. The list's mesh pipelines are left out at the boot on a GPU without mesh shaders, as the preparation leaves them out. Nothing of the list goes into pipeline-keys.bin.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 06:19:39 -05:00
chrg6
c05b2570eb Make the version 0.9.0, and leave the long-wait watch off by default.
The watch's thread takes the kernel lock every two seconds to look at every guest thread; a release does not need it running, and wait_watch_s = 10 turns it on again for a hang report.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 05:29:44 -05:00
epicmeme546
3010a637bf Let one replay worker record each long run of draws from a copy of the replay state, behind NX2NAVI_REPLAY_WORKERS.
Stage 1 of recording a submission on several threads. A submission's draws come in runs between ops that have to
stay in the replay's order on its own thread (dispatches, copies, texture and buffer clears, events, the game's
barriers, calls). With NX2NAVI_REPLAY_WORKERS=1 a run of 16 draws or more is recorded by a worker thread: it takes a
copy of the replay state, records the run into a command buffer of its own pool with a draw context of its own, ends
it behind a full barrier and hands the state back. vk_sync_append puts that command buffer into the part between the
replay's own pieces before and after it, so the GPU runs everything in the op stream's order. The submitting thread
waits for each run, so every side effect keeps the replay's order; this stage checks that a run recorded apart from
a copy of the state gives the same pictures. The default, 0, replays as before.

walk's handling of the ops that do not steer it moves into op_one, which the worker uses too. NX2NAVI_REPLAY_RUNS=1
logs every 600 frames how the draws fall into such runs and which ops break them. The draw replay's hot functions load
their recording context once instead of at every use.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 02:14:36 -05:00
epicmeme546
4c5855ce43 Hold ASTC textures whose every block decodes opaque as BC1 instead of BC3: the same texels in half the video memory.
The BC3 encoder's colour half is a four-colour BC1 block (c0 above c1, or every index 0 when they are equal), so a BC1 image of an opaque texture decodes to exactly the texels the BC3 one did. The encoder writes that half alone with its specialization constant BC1 set; its push constants are as before, so the BC3 pipeline is unchanged.

Every ASTC texture the CPU provides is made BC3, and its first upload checks its blocks while it copies them into staging: when all decode with alpha 255 (tex_astc.c astc_blocks_opaque, from the block header for all but the endpoint modes with alpha, which are decoded), the entry gets a BC1 image in place of the BC3 one before the decode. Later uploads into a BC1 image check again and go back to BC3 for content with alpha. A large texture's copy and check run on the ASTC decode workers, so its first upload copies faster than before. A check of its own where the texture is made cost 1.7 s of the render thread over a seven-minute teleport tour.

On that tour (Kakariko Village, the Graveyard, Death Mountain Trail, Kokiri Forest, Hyrule Field, RX 7900 XT), against BC3 alone in the same batch: the ASTC textures in Hyrule Field at the end 2,568 instead of 3,104 MiB, video memory at its peak 11,814 instead of 12,374 MiB, process commit at its peak 25,539 instead of 26,139 MiB; the first 7,200 frames in 93.7 instead of 101.3 s and the run's slowest 1 % at 24.1 instead of 21.1 fps. --probe-astc checks the header test against a decode of every generated block, the loop, its copy and the worker pool against it, and each BC1 block against the colour half of its BC3 block. NX2NAVI_ASTC_BC1=0 (astc_bc1 = 0) keeps every ASTC texture BC3; the sampling probe NX2NAVI_ASTC_BC_PROBE it replaces is gone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 02:11:46 -05:00
chrg6
14fbc6a0ea Make the mesh fallback's programs on up to four worker threads instead of one.
A place's task and mesh programs all arrive in its first frames, and each one's draws are left out until its compute
pipelines are built, so with one thread the foliage of a first visit filled in one program at a time.
NX2NAVI_MESH_FALLBACK_WORKERS (auto: one thread for each 4 logical processors, 1 to 4) sets how many threads make
them, and the log says how long the queue took to empty the first time.

Measured with the fallback forced on, no pipeline cache and new exe names (cold driver cache), the adult save's
first 75 s: with 1 worker the first 5 programs were ready after 420 ms, 3,266 draws were skipped while a pipeline or
program was pending, 1% low 16.1 fps and 145 frames over 50 ms; with 4 workers 256 ms, 956 draws, 55.7 fps and 35.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 19:38:18 -05:00
chrg6
1771775e3c Log a game thread that waits 10 s for a lock or for another thread to end, with what the other thread is doing.
A game that stops with nothing in its log leaves no clue to which threads wait for which. A thread of its own now
looks every 2 s for guest threads blocked that long on a lock (ArbitrateLock) or on another thread's end
(WaitSynchronization on a thread handle) and logs each such wait once: the waiter, the lock's holder or the thread
waited for, and whether that one is itself waiting and on what. Waits on condition variables, events and addresses
are left out, since idle worker threads wait on them for good. At most 24 lines a run. NX2NAVI_WAIT_WATCH_S sets the
threshold (10; 0 off). The wait's start is now kept for every blocking wait, not only under the sched trace.

Checked: the runtime compiles and tests/sync_wake_check.py passes. A 90 s run with WAIT_WATCH_S=1 logged one chain
during an area load ("thread 0x102d has waited 3 s for the lock ... held by thread 0x105a, itself waiting 2.6 s"),
and nothing in steady play; with the default of 10 s, earlier runs log nothing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 19:38:18 -05:00
chrg6
e96a89c31c Raise anisotropic filtering of the game's tiled surface textures to 16x by default.
The game asks for 1x or 2x on its ground, road and wall textures, so they blur a few metres off at the shallow angles
a third-person camera sees them at. aniso now defaults to 16 (the menu's Texture filtering row and the ini still offer
game, 2, 4, 8 and 16); as before it raises only filtered, mipmapped textures that tile, and shadow maps, data maps and
screen-sized buffers keep the game's setting. A player's saved choice is kept.

Measured: two 60 s runs of an adult save on an RTX GPU at 2560x1440 without DLSS, one with aniso = game and one with
16: the GPU time a frame went from 3.92 to 4.06 ms (+0.14 ms), the frame rate stayed CPU-bound (142.7 and 148.3 fps
mean, within the runs' spread).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 19:38:18 -05:00
chrg6
2cccdb8823 Keep the game on the largest-L3 die only when that die has 8 cores, and reserve no recorder core there.
cache_die moved the process to the logical processors of the largest L3 cache whenever the L3 sizes differed. That is
right for a two-die X3D desktop part with 8 cores a die, but it also held the game to the 4 large cores of a mobile
part whose 8 small cores share a smaller L3, and to the 6 cores of a 12-core X3D part, where the recording thread's
reserved core then left the game 5. The die is now used only when it has 8 or more physical cores (perf.c
cpu_placement logs when one is passed over). And while the process runs on that die alone, RECORDER_CORE=auto
reserves no core for the recording thread, since the game's threads already have the die to themselves; =1 still
reserves one.

Checked: all runtime files compile. This PC has a single-die processor (one L3), where neither rule applies: a run
still reserves the recording core (logical processors 14 and 15 of 16) and logs no cache die.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 19:38:18 -05:00
chrg6
bfe88e503a Add one anti-aliasing setting: the game's SMAA, off, FXAA, SMAA at its Ultra preset, or TAA.
Ocarina anti-aliases every frame with its own SMAA in three compute passes after the bloom composite. The new aa
setting (nx2navi.ini aa, the Screen tab's Anti-aliasing row) keeps that by default. off, fxaa and smaa leave out the
game's edge and weight passes and replace its composition with a pass of our own that writes the same square-rooted
RGB9E5 words into the scene target: a plain copy, an edge smoothing written here, or the SMAA reference implementation
with its area and search textures (MIT). taa is DLSS or FSR 3.1 at the scene's size, which the row sets through the
upscaler; while either runs, the game's SMAA stays whatever aa says. The game's passes are known by a hash of their
guest code. The shader build now also rebuilds a header when a file its source includes changes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 15:09:16 -05:00
chrg6
e501ded816 Keep the ASTC decoder's scratch across upload batches and stage its blocks in the staging arena by default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 15:09:15 -05:00
chrg6
3529eff949 Offer both kinds of HDR in the menu again: the tone mapped picture and the game's own.
The HDR row lists Off, RenoDX (the game's picture tone mapped to the display, the one fixed look) and Native (the game's own HDR, taken up at the next start), with the peak, game and HUD whites under either.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 15:06:30 -05:00
chrg6
309e412f1f Make HDR one fixed look with true blacks, and keep only its on switch and the three whites as settings.
HDR on is the game's scene through the observer-response mapper, anchored to the game's own mid grey and tone slope, with half of the hue bend of the game's clamp: the defaults the menu had. The tone mapper choice, the mid grey, the tone slope and its match, the hue clip, exposure, highlights, shadows, contrast, saturation, highlight saturation, blowout, flare, hue, grade and gamma are gone from the menu, the settings table and the example ini; a file that still sets them works as before, the keys read by nothing and logging nothing. The menu's HDR row is Off and On, with the peak, game and HUD whites under it. The game's own HDR is still there for a file that sets hdr = native, and the row lists it only then. The luminance mapper and its grading code, which no setting reaches any more, are removed from the tonemap library, and the support buffer carries one vec4 for it.

The dark tones of a dark scene sat far above black: the present showed the game's sRGB-encoded picture as that encode decodes, linear near black, while the game is graded for a display of gamma about 2.2, and since the observer-response mapper became the default the 2.2 correction ran with the luminance mapper only. A scene value of 0.003 came out at 0.29 nits at a white of 350 nits, where a 2.2 display shows the game at 0.015. The present now always shows the picture as a 2.2 display would, and the tonemap aims its peak lower by that correction's inverse, so the brightest light still reaches the display's peak; the same value comes out at 0.017 nits.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 15:06:30 -05:00
epicmeme546
7b201d868e Drop only stale released textures under VRAM pressure, let textures give way only when the system's commit runs low, and count the heightmap slots a finalize now leaves current.
Above the VRAM pressure threshold the released textures that come back intact were dropped oldest first, however recently released. The game releases and takes back hundreds a frame in towns, so the list is mostly those, and each drop was made and uploaded again within frames and freed nothing. With the budget taken as 7.5 GiB (NX2NAVI_VRAM_BUDGET_MB), seven minutes of teleports between Hyrule Field, Kakariko Village, the Graveyard, Death Mountain Trail and Kokiri Forest dropped 82,288 and stayed over the budget throughout; with 11 GiB, 178 draws met a texture that was gone. They now go by the rule drop_stale keeps (released STALE_FRAMES ago and idle): on the same tour 34,699 drops, a fifth fewer textures made again, a third less time the render thread waited on textures, 4 draws of a missing texture instead of 11, and the slowest 1 % of frames in Hyrule Field afterwards at 32 fps instead of 22.

Past the process's own commit bound (tex_proc_commit_mb), textures were dropped and idle live ones evicted as under a low system commit. The bound compares the commit less the video memory in use, and a dropped texture lowers both sides alike, so nothing a drop did could bring the process back under it: textures went one after the other for as long as the rest of the process stayed large, and the ground flickered white with the system's commit to spare (#434). The bound now only writes its line into the log.

The perf trace's texture origins line counts the slots a finalize leaves current because another texture of the same parameters was registered at the storage since (the terrain heightmaps of pull request #535): 173 at the load of a Hyrule Field save, and between 40 and 365 every 60 frames while Link runs through the field, each of which the old rule left stale.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 12:53:58 -05:00
chrg6
d55f7e763d Make co-op a hidden beta in 0.8.0: the menu shows its Co-op tab only with coop_beta = 1.
No menu row sets coop_beta; it lives in nx2navi.ini under [coop] (NX2NAVI_COOP_BETA) and takes effect at once. Co-op
itself is unchanged: coop = 1 still runs a session with or without the tab. The notes and the co-op guide say how to
show the tab.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 09:47:42 -05:00
chrg6
ff3bfd1a4a Let the wait after a frame's first submission write the results the game reads before it returns.
That wait ends when the GPU has run the submission's own commands (wb_split = 1). The completion thread was then still
at the last frame's submissions, so the occlusion counts, counter reports and event values the game reads next reached
its memory after it had gone on. A player's capture in Hyrule Field shows the result: trees, ground and walls lose
their direct light for single frames about every 36 frames, 57 of 1,800 frames, and with the fence's wait
(wb_split = 0) the same place showed none.
The fence's wait also covers the rest of what the completion thread does for those submissions, 0.23 to 0.40 ms a
frame of page stamps the game does not read. So those results now have a queue of their own
(vk_completion_add_result), and the waiter runs the ones due for its submission and the ones before it as soon as
the GPU's signal is there; the completion thread runs them the same way, ahead of its other callbacks, one runner at
a time and in the order they were queued. wb_split = 3 is the bare wait as it was, to measure against.
Checked: it builds, the launcher tests and the address table check pass, and the player's hand test of this wait at
that place showed no such frame. Not measured: no scripted run of it was made (the one scripted run with the bare
wait in that field shows 1,170 occlusion counts a frame written late and no dark frame, so the script does not
reproduce the fault), and its cost against the bare wait is not known.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 08:58:00 -05:00
chrg6
bdc67cebfc Take out the GPU address history of a lost device's report.
The author of the pull request it was ported from closed that request on 2026-11-11 with the words that they give no
permission to use its code. The history (NX2NAVI_VA_REPORT, runtime/vk_vaddr.c, the stack walk it used and its notes
in the docs and the example settings) goes; the lost device's report keeps the breadcrumbs, the pass marks, the video
memory and the driver's fault information.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 08:18:55 -05:00
chrg6
3d394dd84e Merge the fixes line: the stutter, memory, flicker and crash fixes, co-op, the mesh shader fallback and the launcher fixes.
Brought onto the line with FSR 4, its frame generation and the debug menu. Where both sides had added to the same
place, both stay: the patch table keeps the pickup count and the free camera, the settings list keeps both sides'
names, the menu includes the co-op page and the debug menu, and the launcher builder takes the pipeline list and the
FSR 4 folder. Both sides had added the menu's typed-character event; one definition stays, with the window code that
passes characters outside the basic plane.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 08:18:01 -05:00
epicmeme546
b59c0d40a8 Add a free camera to the debug menu.
With it on, the game draws from a camera of the menu's instead of its own, in play and in cutscenes. The left stick moves it along its view and sideways, the right stick turns it, ZR and ZL raise and lower it, R makes it faster and L slower, and Link stands meanwhile; or the camera stays where it is and the pad plays the game.

It works inside the game's own camera update: a new patch site sends the instruction at which the frame's position, target and up vector are final to a host function, which replaces them for the camera that follows Link and the one the events direct, so the game draws, culls and loads detail for what the free camera sees. The camera of the interface's 3D models and the one the sound follows stay the game's. The set is off unless the menu switches it on. A teleport's arrival starts the free camera again from the game's view.

Tested in Hyrule Field with scripted stick input (turn, rise, strafe, with Link's position unchanged), with the pad playing while the camera stays, across a teleport to Kakariko Village, during the Kakariko arrival cutscene, and switched on by a click in the menu.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 08:04:19 -05:00
epicmeme546
fe3126e9a7 Add teleporting and cutscene starting to the debug menu.
The Teleport tab lists every area of the game with its named start positions, read from the player's own game files: the warp songs' pads, both sides of the loading zones and the boss rooms among them. A click changes area the way the game's own doors do: during a short event of the game that only waits, the menu reserves the next area and start position in the game's data and asks the game's sequence for the change, so the area unloads and loads as in play, a first visit's cutscene plays and a boss room starts its fight.

The Cutscenes tab lists the game's event scripts by name and starts one through the game's event manager.

Tested from Hyrule Field to Kakariko Village, the Forest Temple, Kokiri Forest in the child's time, the bottom of Lake Hylia, Volvagia's room, and the pads of two warp songs, four of them in one run, with Link walking afterwards; the Kakariko arrival cutscene started by name.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 07:29:17 -05:00
epicmeme546
5a69bdc91f Add a debug menu for testing Ocarina of Time: the game's flags by name, the game's speed, and a memory search, on F9.
With debug_menu = 1 (off by default; the Game tab has the switch) F9 opens a panel on the left edge in the
performance overlay's look, with the game in view beside it. ui/menu.cpp lays it out in the settings menu's place,
so its input and the game's blocked pad are the menu's own. Typed characters now reach the menu for its text fields.

Flags: the game's 11,292 on/off flags are read from its game data manager, and a click changes one through the
game's own function on the game's thread at its pad read (runtime/debug_tools.c dbg_tick), so the game applies it
at its next update as it does its own changes. The game knows a flag by the hash of its name only; the names shown
are found in the player's own event flow files, hashed and matched when the panel first opens (2,250 of them from
915 files in 0.2 s), and none is kept in the code. World: Link's position, and a speed factor from 0.05 to 8 that
multiplies the step the runtime gives the game each frame (measured 0.50 at 0.5x). Memory: a search of the heap
for a value of 1, 2 or 4 bytes or a float (about 2 s), narrowed by equals, changed, unchanged, went up or went
down, with a value to set at a place or to hold there every frame.

Tested through the window's own messages: F9 opened it, a click on a flag set that flag in the game, text typed
into the filter narrowed the list, and F9 closed it; a scripted run set and held a value and put it back.

Teleporting, a free camera and starting cutscenes are not in it: writing Link's position, or every copy of it in
the heap, moved him back within three frames, so they need the game's own warp, scene-change and event functions.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 06:19:47 -05:00
chrg6
31e0a02901 Merge the mesh shader fallback: task and mesh programs drawn through compute passes and an ordinary draw where the card has no mesh shaders.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 06:01:39 -05:00
chrg6
33d605fb13 Merge the texture origin diagnostic and the fill of a second descriptor's image from its storage, and let the play file replace a pipeline cache that is over the limit.
A pipeline cache over the size limit was dropped at every start and, since the file is no longer written in play, never replaced: every start began empty. The play file is now folded in at the next start whatever its size when the file beside it is over the limit.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 05:58:56 -05:00
chrg6
f6aca1f9c7 Add the mesh_fallback setting and decide at device creation whether task and mesh programs are drawn through compute passes.
auto turns the fallback on for a device without VK_EXT_mesh_shader, 1 for every device (testing), 0 never.
mesh_fallback_mb sizes the buffers the passes write. Nothing draws through it yet.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 05:58:32 -05:00
chrg6
6c991d628d Start a texture the CPU does not write, made over storage the CPU writes, with that storage's bytes.
Two descriptors can name one CPU-written storage: one whose content the cache takes from the CPU, and a second with a texture flag for which it does not. The second has no upload of its own and its slot shows the first one's image while that entry is live. Once the first is released, a lookup of the second's slot makes it an entry of its own, start_at destroys the released first one, and the new image starts cleared and is never uploaded; the slot shows it from then on, also after the first descriptor is registered again. The same happens when both are released and the texture pool refresh looks the second's slot up before the next texture arrives in that memory.

With tex_split_fill = 1 (the default) start_at gives such an entry the storage's bytes: by a copy from the released CPU-written entry it is about to destroy when that image is current and alias_compatible allows, else by an upload from the storage. The image then follows the storage as a CPU-written texture's does until the GPU or WriteTexels writes it; 2 fills it once, 0 is the behaviour before. Depth, stencil and multisample images, pools without CPU access and storage over 32 MiB are left out, and an entry that is to be filled gets a new image instead of a released entry's, since a reused image goes through its first transition after the upload batch. The perf trace counts the copies, the fills with their bytes and time, the fills made again after a write and the entries left empty.

--probe-vkmem makes both sequences with the three values and reads the second descriptor's image back: zeros with 0, the storage's bytes with 1, and with 2 the bytes of the texture that was in the memory before when both descriptors were let go of. One case makes the entry inside a recorded submission, through a hook that lets the probe stand in for a replay, and there the content comes by the copy.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 05:57:23 -05:00