The pool refresh runs before every draw that binds the pools, so its count budget of 16 creations held per draw, not
per submission. An area load in the 0.6.1.12 test made 4,925 entries (1.7 GB of uploads) in one 430 ms frame, and
2,018 in a 195 ms one. While slots were left over, every draw walked the whole table and looked each of them up again,
about 100 ms of the 430 ms frame in key hashing alone.
Once a frame's refreshes have taken pool_create_ms (default 6 ms; 0: no limit), they create nothing more until the next
frame, and skip the slots left earlier in the frame. The first refresh of each frame keeps its count budget. The slots
left keep their stand-in for a few frames during a large load.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The texture pool refresh looks up every registered slot, so the textures of every area the game keeps loaded never
counted as idle and their memory only grew. Marked shaders now store into a buffer with one word per pool slot. Every
four submissions that recorded work, the replay copies it out and clears it, and the texture side notes when each
texture was last sampled. Under VRAM pressure or low commit, once idle textures are gone, live textures that come back
intact and were not sampled for 1800 presents go too. Their keys are held, so the pool refresh keeps the stand-in until
a shader samples that slot again, and the next refresh makes the texture again.
Fragment shaders that neither discard nor write depth, sample mask, stencil reference or memory keep early depth tests
(EarlyFragmentTests), so the marks do not take away early depth rejection. Alpha to coverage leaves the dynamic state
while marks are on, so each pipeline knows whether early tests are safe. Disuse eviction waits until every module that
indexes the pool was marked and two reads arrived. NX2NAVI_TEX_DISUSE=0 (tex_disuse = 0) turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 1a4c896150a748f9275c3024e96af3055db94af4)
The scene upscaler's stand-in took the RGB9E5 texture at the picture's address, but that is a separate image nothing renders into, so it showed stale or uninitialised memory, which flashed red. The stand-in now finds the image at that address that was written as raw RGB9E5 words this frame, looked up live because a remembered image may be gone by then, and shows that one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Without DLSS or FSR 3.1 the stand-in takes the input in the output's format. The current picture also resolves as RGB9E5 at the same address, and when it did it was refused, so the older picture bound beside it was shown instead. An RGB9E5 input now counts as the picture and goes through the same decode.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A device lost seen on RTX 4090, 5090 and 5070 Ti cards in 0.5.0 and 0.6.0 (#177, #61, and a 0.6.0 test run): a
"read invalid" at the start of a 128x128 scene capture pass, re-rendered at area loads. destroy_tex purged the views of
the image and deferred the image, then freed its record at once, on whichever thread released the texture. The replay
keeps &e->pub as a render target for the rest of a command buffer (vk_exec.c resolve_target) and DLSS for the frame:
a pass that began again (each indirect mesh draw ends the pass) read the freed record and cached a view of the dead
image, which nothing removed. Vulkan gives a destroyed image's handle to a later image, which then got that view, and
the pass loaded its attachments from freed memory.
- destroy_tex marks the record gone and frees it through the deferred destruction (vk_defer_free, a host kind stamped
with the submission being recorded, as the image is).
- A gone texture's attachment view is made per command buffer (vk_exec.c view_of) or deferred with it
(vk_exec_target_view, for DLSS and the contact shadows), never cached.
- A new image drops any view still cached under its handle, and the log counts it ("cached views of a destroyed image").
No rendering changes: the views and images live exactly as long as before, the records slightly longer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
From the local fixes package (fix 11), measured in Kokiri Forest at 4K on an RTX 4090 over PCIe 3.0: 40.5 to 62.6 fps
native and 45.6 to 74.9 fps with DLSS Quality, the mirror copies from 6.5 to 0.3 ms of GPU time a frame.
- Pages a VRAM mirror wrote back into guest memory are not copied up into it again: the mirror sync reads page stamps
of their own that a mirror's write-back leaves alone (vk_gpu_written_back, decided at record time by
vk_mem_mirrored). This replaces the lookup table NX2NAVI_WB_NO_REUP had, keeps its name, and is now on by default.
- The game's flushes of mirrored memory are not copied where the write watch covers the region, as every page the game
wrote there is stamped already (47-57 MiB a frame); NX2NAVI_FLUSH_UPLOAD=1 copies them as before.
- Written storage ranges up to NX2NAVI_WB_MERGE_MAX (now 32 MiB) are merged in 4 MiB pieces, so a range is no longer
bound to what one dispatch covers; the snapshot pool keeps its budget-scaled size with 128 slots.
- A submission's first part goes to the GPU at the first pass boundary while the GPU is idle (split_idle), long passes
are split too (split_in_pass), and the part's time limit reads the clock less often.
- A render target that needs an image of its own takes the image of a released one with the same parameters, released
two or more frames before (tex_reuse); memory requirements are kept per parameter set; a released entry another
descriptor's entry replaced at its address is kept and taken back.
- The memory check reads a page's write-watch bit and stamp under the lock that keeps them together.
- The launcher reads the gamepad only while its own window is in front, and does not start a second copy of the game.
- make_game.py says why a Python package did not load, not only that it is missing.
The fix's per-pass GPU timing is left out: NX2NAVI_GPU_PASSES does the same in main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The target history is now four-way set-associative and counts a target as recent when one of the last four frames
rendered it, so the scene passes, probe layers and alternating effect mips no longer read as never rendered and wait
for their pipelines one at a time when a new area is entered. NX2NAVI_ONESHOT_BUDGET=1 makes one-shot draws share a
wait budget per presented frame (100 ms for large passes, 300 ms for small ones) instead of waiting up to
ONESHOT_WAIT_MS each; it is off by default until play shows no target left empty that way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The draw path called getenv("NX2NAVI_SKIP_PROG") for each of ~2,000 draws a frame, and getenv walks the whole environment block: in a replay-thread profile it was a sixth of the samples. That switch, the polygon offset log and the ASTC alpha probe now read the environment once. The replay's cost per draw went from 3.7-5.0 us to 1.2-2.8 us in play, and the mean frame rate by minute from 60-131 fps to 103-243 fps (different places in each run, so the figures are approximate).
cfg_get and cfg_value keep each thread's answers per name until the settings version changes (cfg_set, cfg_reset, cfg_load, and cfg_setenv, which the code that sets NX2NAVI_ variables in the process's own environment now uses); NX2NAVI_CFG_MEMO=0 asks every time.
The texture pool creates at most pool_create_budget (NX2NAVI_POOL_CREATE_BUDGET, default 16, was a fixed 64) new texture entries per refresh. The refresh holds the texture lock throughout, and streaming new textures in made 20-40 ms frames; at 16 the lock was held 5 ms per slow frame instead of 24 in a dense area, and the frames over 25 ms in a heavy minute fell from 111-188 to 89, with no pop-in seen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
lock_time (NX2NAVI_LOCK_TIME) makes the replay threads time each lock they have to wait for, kept per asking site (platform.h plat_lock_timing, plat_mutex_lock_at and plat_rmutex_lock_at carry the site), and the frame-time summary lists the sites with the most wait, the recorder's full-ring and drain waits, and the texture lock's holds over 1 ms with the code that took it. replay_time now also keeps each frame's replay ops: a frame over 25 ms charged to the replay says how many draws, binds and transfers it replayed, their time, its slowest op, and how much of the replay's wall time the thread was on the CPU. NX2NAVI_PROFILE_REPLAY=1 samples only the replay thread without call chains, and the profiler now follows the thread that replays instead of the one that started the back end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NVIDIA 621.01 reuses a pipeline-cache.bin entry only in the executable that wrote it, so every renamed or updated exe
compiled all of its pipelines again (23 s boots, 17 % read from a 470 MB file). With NX2NAVI_PIPE_BINARIES=1, where the
driver has VK_KHR_pipeline_binary, every pipeline, stage library and compute pipeline is looked up by its driver
pipeline key in pipeline-binaries.bin and made from the stored binaries; anything not stored is compiled once with its
data captured and appended. Each binary is stored once under its own key: nearly every graphics pipeline carries the
same 2 MiB binary, which made a first version of the file 7 GB. pipeline-cache.bin is not used while this is on. The
knob is off by default while it is being tested; NX2NAVI_PIPE_BINARIES_MAX_MB caps the file.
NX2NAVI_ONESHOT_WAIT_MS sets how long a draw into a target the previous frame did not render waits for a pipeline built
for the first time before it is skipped; the default keeps the old 30 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game's ACES tonemap shader gets a GLSL function linked into its SPIR-V where it clamps each channel: the game's SDR result upgraded to the HDR range by luminance and mapped to the display with the RenoDRT curve, exposure, highlights, shadows, contrast, saturation, highlight saturation, blowout, flare and hue correction. The settings reach it as four vec4 the support buffer gains at 1440. The present encode is a port of the swap chain pass: gamma correction, gamut compression, the peak clamp and PQ. Without an HDR10 swapchain the shader gives the game's own SDR picture; native HDR is unchanged.
The menu offers Off, RenoDX and Native, with gamma correction, the tone mapper and its grading rows. The shader build compiles sources marked "keep functions" without optimisation so their functions survive for the splice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Large compute shaders that no cache holds are built on one background thread after the boot prebuild, smallest first, so their first dispatch no longer compiles them on the replay thread. NX2NAVI_BIG_BUILD_MAX_MB stops that builder once the process has grown by that much: on a 31 GB machine one of these shaders took the process up by 12.8 GB and the game stuttered while Windows paged. The builder takes the queue under its lock and copies each entry out before compiling it, so a shader queued meanwhile cannot free the arrays under it. The same change reports what pipeline-cache.bin gives back, and starts over when the file grows past NX2NAVI_PIPELINE_CACHE_MAX_MB.
A tensor-core program is now tested before its shader is asked for, in both dispatch paths. It runs the stand-in while NX2NAVI_NATIVE_TENSOR is off, and translating it anyway recorded four AI-upscaler shaders of 0.87 to 4.4 million SPIR-V words that this game never dispatches natively. Process memory went from 29.3 GB to 24 GB and the multi-gigabyte builds during play are gone.
The frame-time summary says which part a slow frame went to, and with NX2NAVI_REPLAY_TIME how the replay splits between draws, binds and transfers; NX2NAVI_SVC_SLOW_MS logs the kernel services that block, with the thread they blocked on. prof_report.py reads the map this build writes and adds the image base to a runtime Rip, so a profile resolves to function names instead of question marks.
build_xlate.py applies the patches with GIT_CEILING_DIRECTORIES set to the build folder's parent. Inside a checkout git read 0021-prmt-byte-permute.patch's paths from the repository's top, skipped every file of it and still exited 0, so PRMT was missing from locally built translators and every byte permute was a no-op. A Skipped patch line now fails the build. The note in AmpereLowering.cs that said the translator emits nothing for PRMT is corrected.
Performance: draws reuse the bindings that did not change and record only the dynamic states that differ from what
the command buffer holds; small uploads come from a staging arena; finished submissions are held briefly and handed to
the queue in batches; the recorder thread can keep a CPU core of its own; ASTC block-linear textures are deswizzled on
the GPU; dynamic resolution steps the upscaler mode to hold a frame-time target. Each has a setting in nx2navi.ini
(bind_reuse, dyn_delta, stg_arena, submit_batch, recorder_core, recorder_prio, astc_gpu_deswizzle, dyn_res) and the
staging cache now frees what it holds at shutdown.
Capture: NX2NAVI_DUMP=key saves the frame after each press of Insert, with mesh draws listed by task, mesh and fragment
shader, depth test and face culling, and mesh_prims.txt giving each mesh draw's primitive, clipping and fragment counts.
All of it is off unless NX2NAVI_DUMP is set.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The foliage's sun shadows took most of the GPU time: one mesh draw shaded about 1,000 million fragments in the far cascade. The far cascade now shades them at a 2x2 rate, and the two far cascades drop one side of the double-sided cards. At the forest entrance the frame rate went from 18 to about 43 fps on an RX 7900 XT.
FSR 3.1, its frame generation and the console mode now take effect without a restart. The full performance overlay lists the settings shown in the options menu.
NX2NAVI_GPU_PASSES times each pass and counts its fragments, and NX2NAVI_SET_AT changes settings at a given frame for test runs. Both are off by default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NX2NAVI_TRACE=audio logs voices starting, stopping and sharing a wave buffer; NX2NAVI_DUMP_MOVIE dumps movie frames; NX2NAVI_LOG_CS_BINDS says why the stand-in for an untranslated compute program skipped a dispatch; and NX2NAVI_TRACE=perf adds heap and commit census lines on their own thread, with VMA maps when write-combined memory grows by 2 GiB. From a tester's fixes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Opt the process out of Windows power throttling (execution speed and
timer resolution) at startup; NX2NAVI_POWER_FULL=0 turns it off.
- Fence completion thread wakes waiters before collecting freed memory,
so collection no longer delays them.
- Add a by-region barrier when a draw or clear writes an attachment that
an earlier draw in the same pass sampled; count it and inline uniform
updates in the per-frame stats.
- Hash small texture contents at upload and skip re-uploads whose bytes
are unchanged (removes ~420 redundant uploads per frame in Kokiri
Forest); NX2NAVI_TEX_SAME=0 turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A depth-compare read through a sampler whose compare is off now gets the slot's comparing sampler, as the Switch
compares there and only NVIDIA's driver did so on its own. Colour components a fragment shader does not write are
masked out, as Maxwell leaves them alone. Without mailbox presentation the swapchain takes relaxed FIFO, or
immediate, so a late frame no longer halves the frame rate. NX2NAVI_VK_NOOPT=1 builds pipelines without the
driver's optimiser, for a driver whose compiler fails on one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Kokiri Forest drew black, in tiles and in shadowed and indoor areas, where shaders read light, probe and instance data through pointers they load from other buffers at an index (a phi of a pushed pointer and a loaded one, a pointer spilled to local memory): those reads returned 0. Translator patch 0030 keeps such accesses global, with a new first source naming the table, and the SPIR-V back end looks the address's 4 KiB page up in it and loads through the buffer device address it gives (PhysicalStorageBuffer64). runtime/vk_gpa.c keeps the table: two levels over the 40-bit GPU address space, page entries naming immutable records, records reused only after the GPU finished with them. Imported pools, their VRAM mirrors and the pages of virtual pools go in it; pools in it are destroyed after the submissions that may still read them. The last failing compute program needed MATCH.ALL (subgroupAllEqual) and the aggregated shared increment ATOMS.POPC.INC, now lowered in AmpereLowering.cs; Kokiri Forest translates without a failure.
NX2NAVI_GPA=0 turns the table off and NX2NAVI_GPA_EMPTY=1 keeps it empty. A first try synced every VRAM mirror at each table reader's draw, which overwrote what the GPU had written into them and made the black worse; mirrors sync only when bound.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each file that contains copied code names its copyright holder and license and points at THIRD_PARTY_NOTICES.md; zlib code keeps its full notice and the mark that it was altered. Comments and probe text only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Comments say what the code does and why, docs/maxwell.md keeps the Maxwell facts, and fetch_refs.sh clones only the checkout the build reads. Code is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NVN2 compute banks get the dispatch's group counts in bytes 0-0xb, for direct and indirect dispatches; the fog pass
after the integration divided by them. Indirect mesh draws read NVN's {count, first} record as {x, y, z}, so y = 0
drew nothing: each now draws from a ring entry holding {count, 1, 1}, copied on the GPU before the draw. An empty set 1
no longer leaves set 0 pushed with 0 bytes. Compute stages with subgroup operations whose width is a whole number of
subgroups require full subgroups.
The texture pool refresh fell from 3.1-3.7 ms to 1.0 ms a frame in Kokiri Forest: slots with the same descriptor,
address generation and entry generation share one lookup (about 14,500 of 15,000 refills a frame), and registering a
texture and view identical to what the slot holds keeps its resolution. Under 20 GiB of VRAM, ASTC textures are
encoded to BC3 by default (Kokiri: 15.9 to 8.2 GiB, same GPU time). The pool log counts refills by cause and what
invalidates them; frame dumps write BC textures as raw blocks and print a storage buffer's backing span; a profile with
NX2NAVI_PROFILE_FRAMES is written when its window ends; the alpha test logs once that it is not applied.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The translator dropped 36113 global accesses per Kokiri boot (loads read 0, stores and atomics deleted); 837 remain.
AmpereLowering computes a predicated LEA's carry sum unconditionally, so a base like c[0][0x110] no longer reaches the
address as a phi; the edge AA's tile list is written and its blend weights follow the edges. Patch 0022 extends
GlobalToStorage: a constant-buffer base inside a sum of terms, and buffers reached through a pointer the program loads
from another storage buffer at a constant offset (the pointer tables Ocarina's vertex, pixel, mesh and compute shaders
read, also through register spills and phis). Such a buffer is listed with its outer buffer and offset, and the runtime
binds it at the address read from guest memory when the stage is bound (vk_exec_draw.c ptr_addr). The fog injection's
64x36x96 volumes now hold in-scattering.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The post pass stores the square root of each channel, so the stand-in for Ocarina's untranslatable upscaler now
filters those values and squares them in its compute pass (shaders/fallback_tonemap.spvasm, vk_tonemap.c) instead of
decoding them with the sRGB curve, which darkened mid-tones and lifted the darkest values; the pass is compiled in again,
its round-24 device loss having been the push descriptor call outside the recorder. NX2NAVI_FALLBACK_EXPOSURE is gone.
AmpereLowering emitted SURED as 0xeb48, which matches no Maxwell instruction, so the translator skipped every image
reduction; with 0xeb58 the edge AA's blend-weight pass writes its image. The translator's own warnings go to res.json
notes, and shader dumps are named by program serial so they match the frame dumps' program numbers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A texture slot whose content the CPU writes now follows another image at its address only when that image differs in
swizzle alone or holds GPU-written content; Ocarina reuses freed glyph atlas memory for captions of another width, and
following the older image drew the Basic Controls screen's "Target" with the wrong row length. Mesh-shader pipelines
are built on the workers and recorded in pipeline-keys.bin (version 4 with the task stage; version 3 files are
converted) instead of stopping the frame for 0.26-0.51 s. The ASTC decoder reuses one scratch buffer per upload command
buffer, and CPU-provided textures up to 32 MiB are sub-allocated unless the driver requires dedicated memory, which
takes the scene-load frame from about 1.25 s to 0.7 s. The feedback scan looks only at bound texture slots instead of
the bindless pool arrays, per-draw knob lookups are cached and the texture address buckets grow to 65536, so Kokiri
Forest's replay falls from about 16 to 7-9 ms a frame and the forest holds 60 fps. A float clear of zero on an integer
image now clears instead of being skipped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The texture pool descriptors are now a ring of sets, one per submission, brought up to date from a change log, and the first submission of each frame waits for its GPU work before the game goes on: the GPU ran late and part of a frame read data of the next one, and distant characters drew NaN that bloom spread over the frame. The window acquire also waits for the image's previous frame. Function locals start at zero unless DLAA is on, which removes the per-warp light tiles on the Great Fairy Fountain floor and Link's dark, speckled look. Texture slots follow only live entries of their own target, so the volumetric fog gets its 3D volume. The pool refresh walks only the slots that changed.
The translator implements PRMT (patch 0021), which it only logged before; the button prompts render again. HFMA2.RELU no longer depends on it, HMMA.F16 rounds once and HMMA.F32 is lowered, checked against GPU vectors with a new Maxwell warp emulator.
The frame dump gains a re-arming white-frame trigger, a trigger on a depth target's first pass, NaN pixels in magenta, image handles and view targets, and depth copies of sampled depth textures.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The NVN2 front end and the SM86 to Maxwell shader lowering (tools/xlate/AmpereLowering.cs, mesh and task stages,
bindless texture pools, BRX jump tables, the NVN2 compute c0 layout) with four translator patches (0017-0020) bring the
opening of the game to 58-60 fps on the Vulkan renderer.
This round fixes the haze: SM86 IPA is lowered as a plain Maxwell IPA.PASS (texture coordinates were corrected for
perspective twice); LDSM, TXD, both F2IP byte forms, HMMA, MOVM and HFMA2.RELU are lowered and spill mode has eight
uniform register groups; conditional rendering keeps the newest counter report per address and treats a report as
pending until its value is in guest memory, so occlusion tests and the depth clears around the depth copy behave; and
the upscaler stand-in decodes the post pass's sRGB picture before writing the linear target. Tensor-core programs keep
the stand-in unless NX2NAVI_NATIVE_TENSOR=1, because their lowering does not match the hardware yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>