The author of pull request #353 closed it on 2026-11-11 with the words that they give no permission to use its code. Its port (3134f524) goes: the mark of a pipeline that declares the table (VkPipeInfo.gpa, vk_pipeline.c pipe_add) and of the part that draws with it (vk_mem_gpa_use in vk_exec_draw.c bind_resources and mo_emit), the sync of the table's pools in every such part's prologue (vk_mem_gpa_sync), the submission with a callback in the replay's place as it stood (vk_sync_probe_submit), and --probe-vkmem's read through the table with its shader (test_gpa_read, runtime/shaders/gpa_read.spvasm).
In its place, after pull request #551, which was written without that code: a shadow pool goes into the table and onto a list of the table's shadows (vk_memory.c shadow_table_add); the record of a binding of the table notes the guest submission (vk_exec_draw.c ssbo_info, vk_mem_shadow_table_read); and vk_mem_shadow_sync brings the CPU's writes into every shadow on the list once for that guest submission, before the part is submitted. Once is enough, because the copy-ins read the guest submission's write-watch snapshots, which a second sync would find unchanged. Measured by #551's author on Linux (RTX 4090, Kokiri Forest): 113 and 76 frames over 25 ms in 75 s against 217 and 429 with the port, 43 against 41 fps, the picture complete in both.
What this line had built on the port stays, on the new sync: the test that passes over a pool with nothing written (shadow_pool_clean), the upload of the same pages into a table pool's VRAM mirror, the write-back of stores through the table (NX2NAVI_SHADOW_TABLE_STORES, table_wb_cb, now asked once per guest submission that binds the table) and the counts of NX2NAVI_SHADOW_CHECK. The probes that record their own commands (the lost-device probe, --probe-vkmem's table parts) call vk_sync_submit_own, written anew. vk_mem_shadow_storage stays: one line that returns the mode. Finalized pools in the table were already kept for vk_mem_shutdown here.
--probe-vkmem has a check of its own for the sync (test_table_sync): the shadow of a pool that is never bound keeps its old word through a CPU write and a guest submission that does not bind the table, and holds the new one after a guest submission that does. It passes with NX2NAVI_SHADOW=1 on Windows (RTX 5090), as do the store check with NX2NAVI_SHADOW_TABLE_STORES=1 and the probe without shadow storage; --probe-devlost ends as before. Not run: the game, with or without shadow storage, and anything on Linux.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Two descriptors can name one CPU-written storage: one whose content the cache takes from the CPU, and a second with a texture flag for which it does not. The second has no upload of its own and its slot shows the first one's image while that entry is live. Once the first is released, a lookup of the second's slot makes it an entry of its own, start_at destroys the released first one, and the new image starts cleared and is never uploaded; the slot shows it from then on, also after the first descriptor is registered again. The same happens when both are released and the texture pool refresh looks the second's slot up before the next texture arrives in that memory.
With tex_split_fill = 1 (the default) start_at gives such an entry the storage's bytes: by a copy from the released CPU-written entry it is about to destroy when that image is current and alias_compatible allows, else by an upload from the storage. The image then follows the storage as a CPU-written texture's does until the GPU or WriteTexels writes it; 2 fills it once, 0 is the behaviour before. Depth, stencil and multisample images, pools without CPU access and storage over 32 MiB are left out, and an entry that is to be filled gets a new image instead of a released entry's, since a reused image goes through its first transition after the upload batch. The perf trace counts the copies, the fills with their bytes and time, the fills made again after a write and the entries left empty.
--probe-vkmem makes both sequences with the three values and reads the second descriptor's image back: zeros with 0, the storage's bytes with 1, and with 2 the bytes of the texture that was in the memory before when both descriptors were let go of. One case makes the entry inside a recorded submission, through a hook that lets the probe stand in for a replay, and there the content comes by the copy.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Making a CPU-visible pool imports its pages (or copies them into a shadow), and the first sync of its mirror and the
texture checks read the write watch afterwards: a write the CPU made before must still be on record then. Nothing in
this line takes it away: the import asks the write watch nothing, and the only reader that resets it stamps the page
generations under the same lock. The self-test now writes two pages, makes the pool and finds both reported, and
prints how many of the pool's pages making it marks by itself.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With shadow storage a write-back at a fence copies a page that has no base copy whole from the shadow into guest
memory. Every write the replay records gets base copies, so such a page means the pool the write was noted on was
finalized before the fence and another was made at its address: the new record's shadow is a copy of guest memory
from its own start, holds no byte of that write, and went over everything the CPU had written to the page since.
The page is now left alone when the record is younger than the submission whose fence it is, or when the CPU has
written the page since the shadow's last copy-in; the shadow line counts such pages.
--probe-vkmem has the case: with NX2NAVI_SHADOW=1 it fails without this change (0x11 over the CPU's 0x22, with
imports and with mirrors) and passes with it, as does the run without shadow storage.
Whether a game does finalize and remake a pool inside that window was not observed in play.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
When the decoder's scratch buffer could not be allocated, the upload logged it and still counted the texture as
uploaded. The image of a new texture then held nothing, and nothing uploaded it again until the game next wrote its
storage, which for most textures is never.
vk_astc_record now tells that failure (-1) from the ones that cannot change, and the upload leaves such a texture as
not uploaded: the lookups try it again every 30 frames until a decode succeeds. A WriteTexels whose decode has no
memory is still only logged.
The memory probe forces one failed scratch request and checks that the texture is left alone during its wait, is
uploaded by the first lookup after it and then holds its blocks.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
NX2NAVI_SHADOW_CHECK=1 logs with the shadow line, every 60 frames: the whole copy-ins that overwrote a store a
shader made through the device address table, and the pools they fell on; the write-backs that moved bytes into
a page the CPU had written since its copy-in; the bytes both sides changed since their base copy; what the
copy-ins cost by kind, and which pools and flag sets took them. The stores are found by content: a whole
copy-in leaves a hash of the page, and the next one compares the shadow page with it first.
NX2NAVI_SHADOW_TABLE_STORES=1 keeps such stores: a page found stored into gets a base copy, so copy-ins take
only the CPU's bytes, and the fence of every submission that uses the table writes the stores back to guest
memory. --probe-vkmem checks it with a GPU write that nothing notes. It is off by default. The overwrite it
removes was the suspected cause of the flicker on Linux and is not: standing outdoors (RTX 5090 with
NX2NAVI_SHADOW=1) it happens exactly four times a frame, on ten pages in pools of 20 and 44 KiB, with the copy
that precedes the frame's stores, and no frame came out wrong with it or without it in 1,800 frames each; the
hashes cost 1.8 ms a frame of the replay (67 against 75 fps); and a count the CPU resets before the write-back
has landed would keep counting, where the whole copy-in resets it every time.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Under shadow storage the copy-in reads each region's write-watch snapshot once per submission. The check ran
its two parts in one epoch, so the second part's copy-in did not see the CPU writes made after the first, and
the probe failed with NX2NAVI_SHADOW=1 ("GPU read of CPU-written heap differs"). Each part now starts a new
epoch, as a submission does.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
One conflict, in the build kit's notes, which keep both the shader cache item and the Texture detail text.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The probe takes the level from NX2NAVI_TEXTURE_DETAIL. It covers a 1024x1024 texture, a 256x256 array of three layers, and a 128x128 and an unmipped texture that stay whole, with the images as RGBA8 or BC3, and the sampler LOD clamp of a reduced texture. It passes at full, reduced and low on an RTX 5090, with NX2NAVI_ASTC_BC 0 and 1.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Whether a slot was stale was read from the released image's entry, which eviction, the released cap or a new image
at the address can destroy before the slot is looked up again; the slot then revived the texture from storage the
game had freed (the access violation in the block copy during a pool refresh). The flag now lives on the slot: a
release sets it on the slots registered with that descriptor, a registration clears it, and a finalized slot of a
CPU-written texture follows only live GPU content at its address.
From pull request #348 by TophC7, taken as it is.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With shadow storage (Linux, and Windows builds under Wine) a CPU-visible pool is a host-visible copy with
no memory object of its own, and only pools that owned one went into the device address table: pointers
the game's shaders read from memory reached nothing. Shadow copies are now in the table. A shader that
reads through the table resolves no pool, so nothing queued the pool it reaches for the copy-in: the part
is marked where its pipeline is drawn or dispatched (VkPipeInfo.gpa, vk_mem_gpa_use), and its prologue
brings the shadow of every pool in the table up to date with the CPU's writes and queues the same pages
for those pools' VRAM mirrors (vk_memory.c vk_mem_gpa_sync). --probe-vkmem reads a word through the table
from a pool that is never bound, before and after a plain CPU write.
Pull request #353 by TophC7, ported onto the base copies of the black-world fix:
- taken as it is: the table registration, the mark in vk_exec_draw.c and vk_pipeline.c, the prologue
call and vk_sync_probe_submit in vk_sync.c (two hunks merged by hand), the probe's test;
- written again: vk_mem_gpa_sync, on top of the snapshot-based shadow_sync_pool; a lookup no longer
queues a pool for being in the table, which every shadow pool now is;
- narrowed: the sync runs only with shadow storage. Without it (Windows) a mirrored pool stays unsynced
for the table's readers as before, so the frame there is unchanged, and the probe makes the source's
mirror only with shadow storage and skips when the device has no address table;
- the probe's shader was an array of SPIR-V words in tex_probe.c; it is now the source
runtime/shaders/gpa_read.spvasm, built like the other runtime shaders;
- the exact re-upload count in the texture probe stays checked on Windows.
Files other sessions are changing: runtime/vk_memory.c (vk_pool_init's registration, mem_resolve's touch,
the new section before vk_mem_use).
The Windows files compile and the shader assembles and validates; no probe was run, and nothing was run on
Linux here.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
This pull request fixed lighting that added up frame after frame under shadow storage on Linux: a GPU write
noted while a part was recorded kept that part's CPU inputs (the game's resets of its lighting accumulators)
out of the shadow. Its fix marked noted ranges as submitted in vk_memory.c; the base copies that came with
the black-world fix already move every CPU-changed byte in before the part runs, so that part is not taken
and no SHADOW_PENDING_INPUTS setting is added. Taken from it:
- tex_probe.c (--probe-vkmem): a range noted as a future GPU write still gets the CPU's bytes before the
GPU reads it. The pull request's other check, that a CPU write made after a GPU result loses to it until
the write-back, is left out: with base copies the later CPU write wins, as it does on the console.
- vk_dump.c: NX2NAVI_DUMP_SHADERS=<hash>,... copies images only for passes that use those shaders, and
NX2NAVI_DUMP_RAW=1 also saves each copied image's texel bytes.
- tools/fix_linux_ambient_power.py, as it is: patches one translated shader of a player's own cache so a
zero exponent no longer gives NaN. It holds two hashes and no shader data.
Pull request #264 by intellq. The Windows files compile; the probe was not run, and nothing was run on
Linux here.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
NX2NAVI_PROFILE_SLOW unwound threads in any module, and one being unloaded while the game started (a driver or vendor
DLL) had its unwind tables freed under the sampler. The exe and the system DLLs are walked freely; any other module is
held with GetModuleHandleEx for the step, and one that is unloading ends the chain. The block-linear copy probe gains
two cases of 256 KiB and more.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Comments say what the code does and why, docs/maxwell.md keeps the Maxwell facts, and fetch_refs.sh clones only the checkout the build reads. Code is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The NVN2 front end and the SM86 to Maxwell shader lowering (tools/xlate/AmpereLowering.cs, mesh and task stages,
bindless texture pools, BRX jump tables, the NVN2 compute c0 layout) with four translator patches (0017-0020) bring the
opening of the game to 58-60 fps on the Vulkan renderer.
This round fixes the haze: SM86 IPA is lowered as a plain Maxwell IPA.PASS (texture coordinates were corrected for
perspective twice); LDSM, TXD, both F2IP byte forms, HMMA, MOVM and HFMA2.RELU are lowered and spill mode has eight
uniform register groups; conditional rendering keeps the newest counter report per address and treats a report as
pending until its value is in guest memory, so occlusion tests and the depth clears around the depth copy behave; and
the upscaler stand-in decodes the post pass's sRGB picture before writing the linear target. Tensor-core programs keep
the stand-in unless NX2NAVI_NATIVE_TENSOR=1, because their lowering does not match the hardware yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>