Commit Graph

29 Commits

Author SHA1 Message Date
chrg6
fbb6783664 Hold less device memory that only costs the system's commit: a smaller released-texture cache, no spare blocks while commit is low, large images in memory of their own.
The driver charges device memory to the system's commit. A 32 GB PC lost the device at an area load with the
system at 61 of 65.5 GB committed, the game at 28 GB: 12.35 GB of VRAM in use, of it up to 1.3 GB in released
textures kept for reuse, 0.5 to 1.8 GB free inside VMA's blocks, and a spare 256 MiB block per memory type.
- Released textures keep a thirty-second of the installed memory (512 MiB to 2 GiB) instead of a sixteenth (1 to 4
  GiB); only those released STALE_FRAMES presents ago go, so the transient ones the game takes back stay.
- The headroom thread keeps no spare block while the system's commit is low (vk_texture_commit_low), as it already
  keeps none under VRAM pressure.
- A texture image of 32 MiB or more gets memory of its own (DEDICATED_MIN), so freeing it gives the memory back at
  once instead of leaving a hole in a shared block that the driver counts in full until the block empties.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 14:00:12 -05:00
chrg6
6910723aed Let a released texture give its content to a new one at its address, and log only the empty starts that can show.
The 0.6.1.9 test still had one black flash, two presents long with FSR 3.1 and its frame generation: a new texture
made over a live one that holds no GPU content started empty (perf counters: one "left uninitialised" at that frame).
A released entry at the same address, kept since 0.6.1 for its descriptor to take back, was never asked for its
content, though on the console the memory still holds what it drew. start_at now takes the newest released entry with
GPU content and a compatible image as the source when no live texture there holds GPU content. Depth buffers that
start empty over another target's memory at every area load are no longer logged, so the 24 lines go to the others,
and the perf line counts copies from released textures.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 13:27:45 -05:00
chrg6
7a60f4e2a0 Let a texture taken back at its address keep its content when nothing has written there since, which stops the black frames.
Ocarina gives its scene picture (r11g11b10f, 5120x2160 here) a second descriptor at the same address that nothing
draws into (rgb9e5, read raw by the post pass). About once a second the picture's entry is released and taken back
there, and since 0.6.1 a taken-back entry restarted empty unless a live texture at the address could give it its
content (vk_texture.c start_at): the second descriptor never can, so the scene went black for a frame (issue #253;
the log's empty starts showed it at frames 4523, 4643 and on, each with "the live texture holds no GPU content").
A taken-back entry now keeps its own content unless a texture at its address holds GPU content written since its
release, as the memory would on the console. The perf line counts them ("taken back with their own content").

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 13:05:35 -05:00
chrg6
b48371ee82 Give a new texture over a live one of another size the region both cover, which stops the black frame about once a second.
Ocarina moves render targets whose size follows an effect on screen, so a descriptor made over a live target's memory
is often a few texels larger or smaller than the target. On the console both read the same bytes; here the new image
started empty when its shape differed (vk_texture.c alias_compatible), and the scene read it for a frame. From 0.6.1 on,
where a superseded entry is taken back at such an address, the scene went almost black for one frame about once a
second while the camera turned (issue #253; flight recorder thumbnails: a dark frame every ~121 presents, each with a
new texture left uninitialised over a live one). Uncompressed colour images of one block size now take the region
both cover (alias_copy), the rest of a larger new image cleared as before; block-compressed ones still need the same
shape. An alias that still starts empty is logged with its reason, 24 at most.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 12:59:48 -05:00
epicmeme546
26eb249026 Stop the red flashing by showing the picture the game's post pass really writes.
The scene upscaler's stand-in took the RGB9E5 texture at the picture's address, but that is a separate image nothing renders into, so it showed stale or uninitialised memory, which flashed red. The stand-in now finds the image at that address that was written as raw RGB9E5 words this frame, looked up live because a remembered image may be gone by then, and shows that one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 11:58:47 -05:00
chrg6
e3bfa3d40a Free a destroyed texture's record only after the GPU is past the submission being recorded, and cache no view of it.
A device lost seen on RTX 4090, 5090 and 5070 Ti cards in 0.5.0 and 0.6.0 (#177, #61, and a 0.6.0 test run): a
"read invalid" at the start of a 128x128 scene capture pass, re-rendered at area loads. destroy_tex purged the views of
the image and deferred the image, then freed its record at once, on whichever thread released the texture. The replay
keeps &e->pub as a render target for the rest of a command buffer (vk_exec.c resolve_target) and DLSS for the frame:
a pass that began again (each indirect mesh draw ends the pass) read the freed record and cached a view of the dead
image, which nothing removed. Vulkan gives a destroyed image's handle to a later image, which then got that view, and
the pass loaded its attachments from freed memory.
- destroy_tex marks the record gone and frees it through the deferred destruction (vk_defer_free, a host kind stamped
  with the submission being recorded, as the image is).
- A gone texture's attachment view is made per command buffer (vk_exec.c view_of) or deferred with it
  (vk_exec_target_view, for DLSS and the contact shadows), never cached.
- A new image drops any view still cached under its handle, and the log counts it ("cached views of a destroyed image").
No rendering changes: the views and images live exactly as long as before, the records slightly longer.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 09:58:26 -05:00
chrg6
0101a87079 Raise the frame rate: fewer copies into the VRAM mirrors, earlier GPU starts, render target images reused.
From the local fixes package (fix 11), measured in Kokiri Forest at 4K on an RTX 4090 over PCIe 3.0: 40.5 to 62.6 fps
native and 45.6 to 74.9 fps with DLSS Quality, the mirror copies from 6.5 to 0.3 ms of GPU time a frame.
- Pages a VRAM mirror wrote back into guest memory are not copied up into it again: the mirror sync reads page stamps
  of their own that a mirror's write-back leaves alone (vk_gpu_written_back, decided at record time by
  vk_mem_mirrored). This replaces the lookup table NX2NAVI_WB_NO_REUP had, keeps its name, and is now on by default.
- The game's flushes of mirrored memory are not copied where the write watch covers the region, as every page the game
  wrote there is stamped already (47-57 MiB a frame); NX2NAVI_FLUSH_UPLOAD=1 copies them as before.
- Written storage ranges up to NX2NAVI_WB_MERGE_MAX (now 32 MiB) are merged in 4 MiB pieces, so a range is no longer
  bound to what one dispatch covers; the snapshot pool keeps its budget-scaled size with 128 slots.
- A submission's first part goes to the GPU at the first pass boundary while the GPU is idle (split_idle), long passes
  are split too (split_in_pass), and the part's time limit reads the clock less often.
- A render target that needs an image of its own takes the image of a released one with the same parameters, released
  two or more frames before (tex_reuse); memory requirements are kept per parameter set; a released entry another
  descriptor's entry replaced at its address is kept and taken back.
- The memory check reads a page's write-watch bit and stamp under the lock that keeps them together.
- The launcher reads the gamepad only while its own window is in front, and does not start a second copy of the game.
- make_game.py says why a Python package did not load, not only that it is missing.
The fix's per-pass GPU timing is left out: NX2NAVI_GPU_PASSES does the same in main.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 09:55:25 -05:00
chrg6
69d49706fa Evict idle textures when the system's commit runs low, not only under VRAM pressure.
The driver charges device memory to the commit, and idle live textures went only above NX2NAVI_TEX_VRAM_PRESSURE of
the device's budget: on a 16-32 GB card the textures of every area visited stayed until the commit ran out, in 27-37 GB
processes that then failed an allocation or lost the device (#177, #203, #215). While commit_is_low holds and the
released entries are down to their low-commit size, evict_idle now runs too, 256 MiB at a time
(NX2NAVI_TEX_COMMIT_EVICT=0 turns it off).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 09:45:47 -05:00
tangerineturtle1
589c9e8654 Stop the replay from searching the environment on every draw, remember setting lookups, and spread texture streaming over more frames.
The draw path called getenv("NX2NAVI_SKIP_PROG") for each of ~2,000 draws a frame, and getenv walks the whole environment block: in a replay-thread profile it was a sixth of the samples. That switch, the polygon offset log and the ASTC alpha probe now read the environment once. The replay's cost per draw went from 3.7-5.0 us to 1.2-2.8 us in play, and the mean frame rate by minute from 60-131 fps to 103-243 fps (different places in each run, so the figures are approximate).

cfg_get and cfg_value keep each thread's answers per name until the settings version changes (cfg_set, cfg_reset, cfg_load, and cfg_setenv, which the code that sets NX2NAVI_ variables in the process's own environment now uses); NX2NAVI_CFG_MEMO=0 asks every time.

The texture pool creates at most pool_create_budget (NX2NAVI_POOL_CREATE_BUDGET, default 16, was a fixed 64) new texture entries per refresh. The refresh holds the texture lock throughout, and streaming new textures in made 20-40 ms frames; at 16 the lock was held 5 ms per slow frame instead of 24 in a dense area, and the frames over 25 ms in a heavy minute fell from 111-188 to 89, with no pop-in seen.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:09:26 -05:00
tangerineturtle1
480a197994 Add replay diagnostics that found this session's frame-time dips, all off by default.
lock_time (NX2NAVI_LOCK_TIME) makes the replay threads time each lock they have to wait for, kept per asking site (platform.h plat_lock_timing, plat_mutex_lock_at and plat_rmutex_lock_at carry the site), and the frame-time summary lists the sites with the most wait, the recorder's full-ring and drain waits, and the texture lock's holds over 1 ms with the code that took it. replay_time now also keeps each frame's replay ops: a frame over 25 ms charged to the replay says how many draws, binds and transfers it replayed, their time, its slowest op, and how much of the replay's wall time the thread was on the CPU. NX2NAVI_PROFILE_REPLAY=1 samples only the replay thread without call chains, and the profiler now follows the thread that replays instead of the one that started the back end.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:09:26 -05:00
tangerineturtle1
a154bafad2 Add a per-frame texture work log line and two ASTC upload changes, all off by default.
texup_log_ms logs a "texup:" line for each frame whose texture work on the render or replay thread
reaches that many milliseconds. The line splits the time into texture creation, staging, storage
copies, ASTC recording, scratch buffers and new device memory, to show where an area load's hitch goes.

astc_scratch_keep keeps the ASTC decoder's scratch buffer across upload batches instead of making a
new 64 MiB buffer for each batch. astc_arena stages GPU-decoded ASTC blocks in the staging arena
instead of a buffer per texture. Both aim at the allocation churn seen during area loads and stay off
until a play test measures them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:09:26 -05:00
chrg6
1f7e9c975b Speed up the replay and fix what the perf pass found, and add a frame capture key for chasing rendering faults.
Performance: draws reuse the bindings that did not change and record only the dynamic states that differ from what
the command buffer holds; small uploads come from a staging arena; finished submissions are held briefly and handed to
the queue in batches; the recorder thread can keep a CPU core of its own; ASTC block-linear textures are deswizzled on
the GPU; dynamic resolution steps the upscaler mode to hold a frame-time target. Each has a setting in nx2navi.ini
(bind_reuse, dyn_delta, stg_arena, submit_batch, recorder_core, recorder_prio, astc_gpu_deswizzle, dyn_res) and the
staging cache now frees what it holds at shutdown.

Capture: NX2NAVI_DUMP=key saves the frame after each press of Insert, with mesh draws listed by task, mesh and fragment
shader, depth test and face culling, and mesh_prims.txt giving each mesh draw's primitive, clipping and fragment counts.
All of it is off unless NX2NAVI_DUMP is set.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 03:34:46 -05:00
chrg6
073ddc0c95 Stop the evictions from emptying VRAM, and give VRAM mirrors priority over textures.
A test run with the budget taken as 16 GiB showed two faults. The evictions measured the driver's heap use, which keeps counting a VMA block whole while one allocation lives in it, so freeing textures and mirrors in the middle of blocks did not move it: they went on until 5700 of 7232 textures and 395 of 410 mirrors were gone (9.2 GiB free inside blocks). And mirrors evicted under pressure during a menu were refused again when the world came back, so the draws read the pools over PCIe at 4 fps. The evictions now count the free space inside VMA's blocks as room (vk_mem_vram_live), mirrors are no longer evicted to make room for textures, and a mirror that does not fit after the idle mirrors made room asks idle textures for the rest (vk_texture_want_room) and is asked again 16 submissions later.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 03:34:46 -05:00
chrg6
fa8f8dc84d Count a texture's idle time in texture pool walks, not in submissions.
The pool refresh looks every registered slot up only in submissions that draw through the texture pool. Counted in submissions, a pause screen or a fade that draws nothing through the pool made every texture of the world idle within seconds (the census showed all 3456 decoded textures idle during one such stretch), and under VRAM pressure the eviction would have dropped them all, to be uploaded again when the world came back. The clock now moves only for a submission whose slot checks reached half of the registered pool slots.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 03:34:46 -05:00
chrg6
63bcb441c0 Evict the least recently used idle textures when video memory runs low.
Above the VRAM pressure threshold (NX2NAVI_TEX_VRAM_PRESSURE, 90% of the budget) only released textures went before, so a scene whose live textures alone passed the budget kept growing into system memory. Once the released ones that come back intact are gone, live textures go too, least recently looked up first: only those whose content their storage still holds (CPU-written, never drawn into) and that no lookup reached for 240 submissions and 120 presents. The texture pool refresh looks every registered slot up each submission, so no live descriptor names them; the next use creates and uploads them again. Up to 64 per check, until the use is 2% under the threshold, and the next check waits for the GPU to pass the submissions that may still name the freed images. NX2NAVI_TEX_EVICT=0 turns it off.

Measured with the budget taken as 16 GiB (NX2NAVI_VRAM_BUDGET_MB=16384), same route, the exe at this commit and the next one: with the eviction off, 17,479 MiB in use in the world, of which 12,321 MiB textures, 37 MiB of them idle; with it on, 43 idle live textures (10 MiB) went in about 6,000 frames. In the world nearly every loaded texture is named by a descriptor, so the eviction frees memory mostly once an area or a menu is left. That run predates the later fixes (the idle clock in pool walks, the free space inside blocks); an earlier run without them emptied VRAM, as the commit that stops the evictions from emptying it says.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 03:34:46 -05:00
chrg6
3c0a4d732f Log where texture and pool memory goes with the perf trace.
Every 600 frames with NX2NAVI_TRACE=perf: the live textures' own memory by kind (decoded ASTC as BC3 or RGBA8, other CPU-written, GPU-written) with the part no lookup reached for 240 submissions and 120 presents, entries sharing a storage address with another, the VkFormats holding the most and the largest entries; then the imported pools the GPU resolved and those it never did, and the VRAM mirrors idle for 120 submissions. Textures now carry the submission and present of their last lookup for it.

Measured with it (user's save, RTX 5090, 2560x1440 with DLSS performance, astc_bc = 1): in the world the live textures held 5,166 MiB (3456 decoded ASTC as BC3, 3438 MiB; 3412 other CPU-written, 965 MiB; 216 GPU-written, 763 MiB; 46 sharing a storage address, 115 MiB) and the mirrors 927 MiB, and of the 5,007 MiB of imported pools the GPU never resolved 4,077 MiB (3787 pools). With fine ASTC footprints kept as RGBA8 (the main checkout's uncommitted rule for astc_bc set by hand), decoded ASTC took 10,382 MiB instead of 3,438.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 03:34:46 -05:00
chrg6
29d8451dd2 Cap the memory released textures keep for reuse, and free old ones when the system commit runs low.
After an hour at 2160p the 2048 released entries held 5-7 GiB of render targets and decoded textures, charged to Windows' commit as well. NX2NAVI_TEX_RELEASED_MB caps them by size (default 1/16 of RAM, 1-4 GiB), and with less commit free than NX2NAVI_TEX_COMMIT_FREE_MB they are dropped to 256 MiB. Only entries released 120 frames ago or more go, at most 32 a check, oldest first. On Linux the commit check applies only with vm.overcommit_memory = 2 (plat_commit_enforced). From a tester's fixes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:48 -05:00
chrg6
42ae87bca6 Runtime: power opt-out, faster fence wake-ups, feedback barrier, texture re-upload skip
- Opt the process out of Windows power throttling (execution speed and
  timer resolution) at startup; NX2NAVI_POWER_FULL=0 turns it off.
- Fence completion thread wakes waiters before collecting freed memory,
  so collection no longer delays them.
- Add a by-region barrier when a draw or clear writes an attachment that
  an earlier draw in the same pass sampled; count it and inline uniform
  updates in the per-frame stats.
- Hash small texture contents at upload and skip re-uploads whose bytes
  are unchanged (removes ~420 redundant uploads per frame in Kokiri
  Forest); NX2NAVI_TEX_SAME=0 turns it off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 06:04:57 -05:00
chrg6
e7f6a00407 Translate every shader, keep atomic loops from spinning on stale values, harden pool teardown, and update the README.
Shaders: a switch whose index is clamped against a register that a MOV of an immediate set before it now finds its
jump table (AmpereLowering.cs BrxTargets), so all 36,031 of the game's shader variants translate and no draw is skipped
for a failed one. The compare-and-swap loop behind storage-buffer atomics (patch 0033) takes the value a failed swap
returns as its next expected value instead of loading the word again, which on some drivers kept returning a stale
copy.

Memory: an unused physical pool outlives the submission being recorded, as virtual pages may still reach it through
device addresses; an image whose creation failed is not tried again for 2 s.

The installer and Linux texts name this game.
The README has the project icon, the current status, features, requirements and known issues.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 18:03:20 -05:00
chrg6
501d5bd084 Release pass: fix crashes, freezes and races, cut VRAM use, and translate more shaders.
Crashes: the render-target heap (HeapDef DynamicTextureAllocatorMem and its parent) grows with the widescreen
picture, so the pause menu no longer reads a null block at 5120x2160; texture uploads keep the game's memory mapped
while they copy it, so UnmapPhysicalMemory no longer pulls it away mid-copy; DLSS Frame Generation no longer crashes
in Streamline's set-up (physical devices and the window surface go through its proxies, its swapchain images are
counted first, resources are tagged per frame); a stale core-wait target is cleared before its thread is freed.

Freezes and races: a resize during a swapchain rebuild is kept, a failed frame generation swapchain is retried
instead of replaced by a plain one, three acquire timeouts in a row rebuild the swapchain, device waits take the
queue lock, a translator child that stops answering times out, an in-flight compute pipeline builds at normal
priority, a save Commit started before the window closes finishes and none starts after, a settings change just
before closing is saved, and a movie sample taken before a flush is dropped.

HDR: Enhanced HDR extends the game's own tonemap so highlights go above the picture's white (the hue slider,
which no longer applies, is gone from the menu); frame generation gets a HUD-less picture, the HDR flag and the HDR10
metadata under HDR too.

Memory: ASTC textures are encoded to BC3 unless the PC has 20 GiB of VRAM and 48 GiB of RAM, as Windows charges video
memory to the commit charge (a long session held 17 GiB of RGBA8 textures and 45.7 GiB of commit on a 32 GiB PC).

Shaders: the translator lowers spill-mode programs with more than eight uniform register groups in a wider spill
layout, and local loads and stores with a uniform-register address (36029 of the game's 36031 variants translate,
20 failed before).

The launcher release ships the shader tools and AMD's FidelityFX library (make_launcher.py --ffx); windres there gets
the toolchain on PATH.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 16:02:30 -05:00
chrg6
1d7bc90848 Fix shadows, colour writes and present pacing on drivers that read Vulkan's undefined cases differently.
A depth-compare read through a sampler whose compare is off now gets the slot's comparing sampler, as the Switch
compares there and only NVIDIA's driver did so on its own. Colour components a fragment shader does not write are
masked out, as Maxwell leaves them alone. Without mailbox presentation the swapchain takes relaxed FIFO, or
immediate, so a late frame no longer halves the frame rate. NX2NAVI_VK_NOOPT=1 builds pipelines without the
driver's optimiser, for a driver whose compiler fails on one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 10:59:59 -05:00
chrg6
99de7b943f Give each file of copied code one license line.
Each file that contains copied code names its copyright holder and license and points at THIRD_PARTY_NOTICES.md; zlib code keeps its full notice and the mark that it was altered. Comments and probe text only.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:40 -05:00
chrg6
1b39aabd37 Describe what the code does in comments and docs.
Comments say what the code does and why, docs/maxwell.md keeps the Maxwell facts, and fetch_refs.sh clones only the checkout the build reads. Code is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:40 -05:00
chrg6
c7257fe652 Fix NVN2 compute constants, indirect mesh draws and empty descriptor sets, and cut the texture pool refresh.
NVN2 compute banks get the dispatch's group counts in bytes 0-0xb, for direct and indirect dispatches; the fog pass
after the integration divided by them. Indirect mesh draws read NVN's {count, first} record as {x, y, z}, so y = 0
drew nothing: each now draws from a ring entry holding {count, 1, 1}, copied on the GPU before the draw. An empty set 1
no longer leaves set 0 pushed with 0 bytes. Compute stages with subgroup operations whose width is a whole number of
subgroups require full subgroups.

The texture pool refresh fell from 3.1-3.7 ms to 1.0 ms a frame in Kokiri Forest: slots with the same descriptor,
address generation and entry generation share one lookup (about 14,500 of 15,000 refills a frame), and registering a
texture and view identical to what the slot holds keeps its resolution. Under 20 GiB of VRAM, ASTC textures are
encoded to BC3 by default (Kokiri: 15.9 to 8.2 GiB, same GPU time). The pool log counts refills by cause and what
invalidates them; frame dumps write BC textures as raw blocks and print a storage buffer's backing span; a profile with
NX2NAVI_PROFILE_FRAMES is written when its window ends; the alpha test logs once that it is not applied.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
chrg6
12fbb31451 Stop texture slots registered before an entry was released from reviving it.
A CPU-written texture slot could resolve to a released entry and upload from storage the game was already freeing,
which crashed in tex_bl_copy during the pool refresh. Each released entry now records the registration serial at
release, and slot_resolve treats slots registered at or before it as stale.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
chrg6
5dfa690d96 Fix Ocarina's garbled UI caption, the mesh pipeline hitches, half the scene-load stall and Kokiri Forest's frame rate.
A texture slot whose content the CPU writes now follows another image at its address only when that image differs in
swizzle alone or holds GPU-written content; Ocarina reuses freed glyph atlas memory for captions of another width, and
following the older image drew the Basic Controls screen's "Target" with the wrong row length. Mesh-shader pipelines
are built on the workers and recorded in pipeline-keys.bin (version 4 with the task stage; version 3 files are
converted) instead of stopping the frame for 0.26-0.51 s. The ASTC decoder reuses one scratch buffer per upload command
buffer, and CPU-provided textures up to 32 MiB are sub-allocated unless the driver requires dedicated memory, which
takes the scene-load frame from about 1.25 s to 0.7 s. The feedback scan looks only at bound texture slots instead of
the bindless pool arrays, per-draw knob lookups are cached and the texture address buckets grow to 65536, so Kokiri
Forest's replay falls from about 16 to 7-9 ms a frame and the forest holds 60 fps. A float clear of zero on an integer
image now clears instead of being skipped.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
chrg6
618b9ba4e5 Fix Ocarina's white dialogue frames, the fountain floor speckle and the button prompt text
The texture pool descriptors are now a ring of sets, one per submission, brought up to date from a change log, and the first submission of each frame waits for its GPU work before the game goes on: the GPU ran late and part of a frame read data of the next one, and distant characters drew NaN that bloom spread over the frame. The window acquire also waits for the image's previous frame. Function locals start at zero unless DLAA is on, which removes the per-warp light tiles on the Great Fairy Fountain floor and Link's dark, speckled look. Texture slots follow only live entries of their own target, so the volumetric fog gets its 3D volume. The pool refresh walks only the slots that changed.

The translator implements PRMT (patch 0021), which it only logged before; the button prompts render again. HFMA2.RELU no longer depends on it, HMMA.F16 rounds once and HMMA.F32 is lowered, checked against GPU vectors with a new Maxwell warp emulator.

The frame dump gains a re-arming white-frame trigger, a trigger on a depth target's first pass, NaN pixels in magenta, image handles and view targets, and depth copies of sampled depth textures.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
chrg6
77d0c0b84e Port Ocarina of Time (Switch 2) to the recomp host
The NVN2 front end and the SM86 to Maxwell shader lowering (tools/xlate/AmpereLowering.cs, mesh and task stages,
bindless texture pools, BRX jump tables, the NVN2 compute c0 layout) with four translator patches (0017-0020) bring the
opening of the game to 58-60 fps on the Vulkan renderer.

This round fixes the haze: SM86 IPA is lowered as a plain Maxwell IPA.PASS (texture coordinates were corrected for
perspective twice); LDSM, TXD, both F2IP byte forms, HMMA, MOVM and HFMA2.RELU are lowered and spill mode has eight
uniform register groups; conditional rendering keeps the newest counter report per address and treats a report as
pending until its value is in guest memory, so occlusion tests and the depth clears around the depth copy behave; and
the upscaler stand-in decodes the post pass's sRGB picture before writing the linear target. Tensor-core programs keep
the stand-in unless NX2NAVI_NATIVE_TENSOR=1, because their lowering does not match the hardware yet.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
Valiantsin Dzerakh
0478c13e45 Import the base tree (MIT, see LICENSE) 2026-11-07 05:04:38 -05:00