A scene draw whose vertex shader reads a matrix palette and whose vertex layout feeds its joint inputs unsigned integers is drawn a second time into the motion vectors with last frame's blocks and camera, as the player's meshes are, with the same depth test and the same guard for bones that turn sharply. Which draw of last frame it continues is decided when the vectors are made, so the replay's threads cannot change it; a draw in doubt keeps the camera's motion. The player's own draws stay with their ownership records.
skin_motion (NX2NAVI_SKIN_MOTION) is 1 by default and 0 turns it off. The motion status line now counts the skinned draws seen, those drawn with their own motion and the others by reason. It has compiled and passed its checks; it has not been played.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A start that finds the pipeline cache written by another device or driver has nothing built, and everything was
compiled beside the game: an 8-core integrated GPU drew fewer than 600 frames in its first 11 minutes. Such a start
now waits on the "Preparing shaders" screen, with counts, for every recorded pipeline, for the compute pipelines on
every core at normal priority, and, when a sample says the driver's own cache lacks the prepared stage libraries, for
all of them on every core. The memory gate still holds for the builds, and the library builds write the preparation's
journal while the start waits, so a variant the driver's compiler dies on is skipped from the next start on.
boot-warm-owed.txt beside the caches names the GPU and driver: a start closed during the warm is followed by one that
goes on with it, three at most, and "done" keeps later starts ordinary while the cache file still carries the earlier
driver's header. When the boot stops waiting (prewarm_wait_ms, or a minute without progress) the builders step down
to the background's thread counts and idle priority. prewarm_full = 0 turns the warm off.
With nothing in the driver's cache the probe took 425 s on an RTX 5090 with 16 CPU threads: 87 s for 5,775 recorded
pipelines, 19 s for 4,075 compute pipelines and 317 s for 42,231 prepared variants.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A ClearBuffer or ReportValue is a fill the GPU makes where it stands in the stream, and guest memory has its bytes once the GPU got there. A counter report reaches guest memory as a CPU write after its submission's fence, and a render condition reads the record when it is replayed. So a report followed by a clear of the same record ended as the report (in one submission always, across two when the completion thread was behind the GPU), and a condition replayed after the clear read what memory held before the fill, or the 0 of the report the clear had overwritten.
A clear of at most 256 bytes into CPU-visible memory is now also applied at its place in the replay to the records it covers that a counter report went into: the covered bytes get the value in guest memory at once, reports replayed before the clear leave those bytes alone when their write comes, a condition reads them from memory, and a report replayed after the clear writes the whole record as before. The GPU's fill is recorded as before. Other small clears stay the GPU's fill alone: the GPU reads guest memory too, at once in an imported pool and through the next upload of the written page in a mirrored one, so a write ahead of it into a draw count or an atomic counter would reach passes that still want the old value. NX2NAVI_CLEAR_SMALL_CPU=0 turns it off.
Whether the game clears counter records is not known. The pass timing captures of 75 scripted runs show one buffer fill a frame and nothing else about it, and the frame dump does not list buffer fills. The periodic vk_usnap line now counts the small clears, the last one's size, value and address, how many covered a record with a report, the reports into bytes cleared before, and the report writes that left cleared bytes alone.
Checked with a build of the dev exe, the launcher tests, the device address table check, and a scratch link of vk_exec_xfer.c against stubs that replays reports and clears in both orders. Not run in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The stand-in for the game's upscaler enlarged the scene with a linear filter, which is softer than the console's picture. It now enlarges with the edge-adaptive filter the present already scales to the window with: the same shader, built a second time with a constant set so it squares what it filtered, as the linear pass does. The stored square-root values are filtered as before and the decode is the same. standin_filter = bilinear brings the linear pass back, and the setting is live. The linear pass also stays where nothing is enlarged and while DLSS or FSR 3.1 runs, since that upscaler scales the scene itself and its picture goes over the stand-in's. The movies do not go through this pass and are not changed.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
On Linux every CPU-visible pool had a host-visible shadow copy, because amdgpu treats a host-pointer import as a userptr object that it looks up again at every submission and invalidates whenever the write watch or a freeze re-protects its pages. Now the watched reservations are shared mappings of one memfd, /dev/udmabuf makes dma-bufs of page ranges of it, and the device imports them (VK_KHR_external_memory_fd, VK_EXT_external_memory_dma_buf). A dma-buf pins its pages once and is not tied to the process's page tables, so protection changes leave the GPU's mapping alone, and nothing is copied.
RADV puts every imported memory object into every submission, so pools share their imports: guest addresses are cut into 64 MiB spans (NX2NAVI_DMABUF_MB), and each pool is a buffer bound into its span's memory at its offset. A new span is cut back at the spans already there, so spans overlap only where a pool itself lies across an older span's edge, since amdgpu counts every span's pages in its GTT use. A decommit punches the pages out of the memfd, or zeroes them in place where a dma-buf pins them, and the pages a freed span pinned that nothing committed go back to the system.
It is on by default where /dev/udmabuf opens, udmabuf's size_limit_mb is 1024 or more, the device has both extensions and NVIDIA's kernel module is not loaded. A start-up probe imports one page as the pools will be; any refusal keeps the shadow copies, and the log says why. NX2NAVI_DMABUF=0 keeps the copies. tests/platform_dmabuf_test.c checks the shared mapping without a GPU, and docs/building.md ("Memory") describes the imports and what they need.
RX 6800 XT (RADV, Mesa 26.2.6), one build, interleaved pairs with NX2NAVI_DMABUF=1 and 0: Kokiri Forest 60.7 against 40.3 fps (3 pairs, +51%, standard error 0.4), 1% low 50.9 against 34.0, frames over 25 ms 5 against 768; Hyrule Field 55.7 against 42.4 fps (2 pairs, +31%, standard error 0.4). No pool was left without a span, no span was refused, and --probe-vkmem passes with and without the imports.
A pass mark names the pass or dispatch the GPU had started and the last it finished. When the two are the same mark the GPU stopped in between, and the report named nothing: in a player's log of 0.9.2 (RX 6700 XT) both were one compute dispatch, with 51 later marks made and none started. The report now adds the mark that never started and the kinds of commands the replay recorded between the two (copies, clears, the upscaler, write-backs), which the gap notes already name for the GPU pass timing and now keep for every mark.
draw_crumbs = 1 (off by default, AMD buffer marks only) also writes a mark wherever the shaders or the pipeline state change inside a pass. The device losses reported on RX 6600 and RX 6800 class cards end inside one scene pass of 30 to 100 draws and the draw that hangs is not known; with the setting on, the report lists the shaders of the draws the GPU had not finished.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A registration the game made while a submission was being replayed changed the slot table under that submission,
whose texture pool set is written as the replay goes and read when it runs. Such a registration now waits and takes
effect once the submission has gone to the queue; with the replay on its own thread it goes into the replay queue
ahead of the next item. NX2NAVI_REG_ORDER=0 restores the old behaviour. In a town session the white kerb, stair and
wall-top edges of single frames were gone with it; the log counts the registrations that waited.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Conflicts: the settings key lists take both sides; frame generation keeps the camera-cut handling and logs its counters every 600 frames with the cuts among them; the pass-time mark moves into draw_viewport; mo_desc keeps the pose depth and notes the reader.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
At every submission that binds the texture pools the replay checks each listed texture for CPU writes, and takes the write-watch snapshot of the 2 MiB regions that have none yet as the list comes to them: one query a region, since the list is in no address order. Standing still that is 5 to 10 queries and the check takes 0.11 ms. While the player runs through Kakariko or Castle Town the game writes about 32 textures into new storage every four or five frames, a region the CPU wrote is not frozen again for 1,800 submissions, and the check asked for 100 to 500 regions one by one, 2.7 times a frame: 0.5 to 1.5 ms a check, about 3 us a query, in five sessions of one player. The regions are now collected for the whole list first and asked in one query per run of adjacent regions. On this machine 400 queries of 2 MiB take 727 us and one query over the same 800 MiB takes 360 us. The same regions are queried and the same pages stamped, all of them before the list is looked at, as each entry's were before its own look; a run across the edge of a watched reservation is left to the queries by range. pool_presnap_runs = 0 asks region by region as before.
A released entry stays in the list until it is destroyed, the check does nothing for it, and the stamp it compares stays as it was at the release, so one whose region took a write later missed the region check at every submission from then on and was fetched only to be passed by: 1,000 to 6,300 entries a check, with up to 8,192 released entries kept. The list now carries the released state, set at the release and cleared at the take-back, and the check passes such an entry by without touching it or asking for its regions.
The pool log's freshness line counts the released entries passed by, and its snapshot queries count the queries either way. --probe-vkmem has a case for the queries by run.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
gpl noted them in ssbo_info, which the bind skip and the kept descriptors leave out once they have warmed up: the
submissions were taken as reading no guest memory again, and the grass and moss flickered again after a minute of play
(every submit wait of a 2100-frame run ended without the GPU). gpa_reader looks once per pipeline for a table binding
and notes the submission at each bind_resources and mo_desc.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The heap limits were fixed at device creation, and only texture images looked at the budget. FidelityFX allocates
outside VMA (FSR 3.1 contexts, frame generation): 882 MiB of it with 4644 MiB of VMA's filled the 5526 MiB budget of
heap 0 while heap 2 had 1757 MiB free, and an upload submit failed with VK_ERROR_OUT_OF_DEVICE_MEMORY. vmaCreateImage,
vmaCreateBuffer and vmaAllocateMemory now go through vk_vma_budget.c, which leaves out a device-local heap whose
driver-reported use is within NX2NAVI_VRAM_RESERVE_MB (default 512) of its budget; a Lama patches row sets it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each draw's indices are now a range of its own and its task records too, reserved by an allocation shader (one
invocation, mesh_emu_alloc_spirv) for the run of draw records queued: before the task stages the task records and the
index ranges of draws without a task stage, after them the index ranges of the others (mesh workgroups with output,
which the task stage now counts in the record, times OutputPrimitives x vertices per primitive). The mesh stage takes
its indices from the draw's range with an atomic in its record; vertex slots stay the arena's, as the indices name
them. So no draw's stages need another's, and the queue (MEQ) records the fills as the draws come, then at the
pre-pass command buffer's end (vk_sync.c pre_end -> vk_exec_mesh_flush): allocation, every task stage, allocation,
every mesh stage, a barrier between each. One by one each draw took three barriers and copied the arena's counters
after the draw before it: an RX 580 spent 5.5 ms of a frame's GPU time on 69 draws' stages in Kokiri Forest.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On 0.9.1 this is the release's own mirror capture (NX2NAVI_MIRROR_CAPTURE_KB) turned on: with
NX2NAVI_MIRROR_STAGE=1 (the default) the pages the CPU wrote are copied out of guest memory, up to 64 MiB a
part, when the part is handed to the queue. A submission whose prologue copied everything that way reads no
guest memory late, so the game's wait after a frame's first submission ends once the replay has submitted it
(vk_sync_recorded_wait). One with a range left to the GPU-time copy (a pool with a write-back in flight or a
twin) or a draw that reads a pool without a mirror is noted (vk_mem_note_live), and its wait is the GPU's.
Also 8 texture pool sets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The perf line's "idle with it queued" was the gap before each replay part handed over before the previous one ended:
13-17 ms a frame on an RX 580 in Kokiri Forest on 0.7.1, unexplained. Uploads and presents were not timed, a held
submission (submit batching) counted as handed over while it still waited in vk_sync, and with cuts and pre-pass
command buffers a submission closed more than the four timestamp pairs ts_unsent had room for: the rest went to the
completion queue without a submit time and out of the GPU's order. Now every timed piece of GPU work (replay parts,
mirror prologues, pre-pass command buffers, upload batches, presents) is noted with when it was handed to vk_sync, when
it really went to the queue and its GPU start and end, and every 60 frames two lines split the idle time: starved
(nothing in the queue, and how much of that a held submission waited in the batching) or with work in the queue, by
the kind of piece that started after the gap, with the average delay from hand-over to start on an idle GPU per kind.
ts_unsent has room for every command buffer of a submission, and the pairs are read in queue order.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A split hands the part to the queue and seals its texture pool set; the next part takes another set of the ring and
refreshes its entries first. The splits for the mesh stages made 5 parts a submission and 6 set switches a frame at
2.3 ms of replay each (Kokiri Forest on 0.7.1, an RX 580: replay 32-38 ms a frame, the replay thread blocked on fences
26-35% of the time, 79 waits for a set the GPU still used). A cut (vk_sync_cut) ends the command buffer without
submitting it: the part and its pre-pass command buffer wait in a chain and go to the queue, in order, with the next
part that does, so the set is the same one throughout.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each emulated mesh draw ended the pass, ran its stages between four barriers and began the pass again: a pass of 20
emulated draws became 20 passes, and on an RX 580 6 to 7 ms of a frame's 30 ms of GPU time went to the gaps between
passes (gpu_passes in Kokiri Forest: 8.7-10 ms per frame outside the game's passes and dispatches, 6.3-7.7 ms of it in
273-306 gaps with barriers only; 71 emulated draws a frame, 36 of them indirect). Now the first emulated draw of a pass
ends the part there (vk_exec_split_now), so the pass begins a new part, and the stages of every emulated draw of that
pass, the indirect ones' ring entries included, go into the part's pre-pass command buffer (vk_sync_pre), which the
queue runs after the mirror prologue and before the part; the pass is not split again. NX2NAVI_MESH_EMU_BATCH=0 (Lama
patches: Mesh emulation before the pass) brings the split back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Without the extension every mesh draw was skipped ("mesh draws need VK_EXT_mesh_shader: skipped"): on an RX 580 the
game's grass and foliage were missing. The translator already builds each task and mesh program as compute code that
MeshSpirv.cs wraps into TaskEXT / MeshEXT modules; runtime/mesh_emu_spirv.c turns those modules into GLCompute ones:
outputs and payload move to workgroup memory, SetMeshOutputsEXT's counts are kept, and the entry function's end
reserves vertex slots and indices in an arena with atomics and copies the vertices and triangles out (task: the payload
and the mesh group count go to a task record, and the mesh dispatch to the draw record). A generated vertex shader
reads the vertices back for the game's fragment shader. Checked with spirv-val (Vulkan 1.3) on the 1016 task and mesh
programs of Ocarina of Time 1.1.1: 1008 convert and validate; the 8 point-list meshes stay unemulated.
vk_pipeline.c gives an emulated mesh pipeline a layout whose task and mesh bindings are visible to compute, with push
constants and a compute-side descriptor template, builds the generated vertex shader's graphics pipeline and the two
compute pipelines; vk_exec_draw.c prepares each mesh draw as before, then outside the pass zeroes the arena counters
(first emulated draw of a submission), fills a draw record, pushes the same descriptors to the compute bind point,
dispatches the task and mesh stages (direct, or from the indirect ring entry) and draws DrawIndexedIndirect from the
record. mesh_emulation = 1 turns it on; mesh_emu_mb sizes the arena (160 MiB).
(cherry picked from commit efc43b177694d8f8ce5700fcf28d80e889a45589)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A dynamic resolution that keeps its targets at the largest size and draws the scene into part of them shows up as a
viewport smaller than the pass; one that resizes its targets shows up in the pass size. NX2NAVI_SCENE_SCALE=33 left
the handheld scene pass at 1440x810, so this tells which of the two the game does there.
(cherry picked from commit af7abe36b0b15c5a63b354d2870543987d1f4b1a)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A save load made thousands of textures between two replay submissions, and all of them went into one upload batch:
about 1.5 GB of raw ASTC blocks plus the decoder's work in a single submission, which AMD's 23.10 driver on an RX 580
refused with VK_ERROR_OUT_OF_DEVICE_MEMORY ("vk: upload submit failed (-2)"). The outermost vk_upload_end now submits
the open batch once its staging holds NX2NAVI_UPLOAD_BATCH_MB (256 by default; 0 = no limit). The batch still precedes
the replay submission that uses its textures, and its staging goes as it retires.
When a submit fails for lack of memory, vk_mem_oom_report logs each heap's use and budget as the driver counts them,
VMA's blocks and allocations there, the open and in-flight upload batches, the VRAM mirrors and pending releases.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ocarina streams its textures by detail level: while the player moves it registers about 32 pool slots with their next level every four or five frames. A pool refresh made 16 of them and wrote the stand-in into the set for the rest until its next round; the set is read as it is when its submission goes to the queue, so an object whose slot was among the rest could be drawn grey for a frame. A player's recording shows 1,525 such slots in 600 frames, each with its texture made later in the same frame. A slot whose entry in the set is a texture's view when it is looked up now has its texture made by that lookup, beside the count budget and the frame's creation time, 64 of them a present; pool_shown_first = 0 leaves them to the budget. The flight recorder also notes a slot that still had no picture when its submission ended.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
When the pool's entry of a slot goes from a texture's view to the stand-in, events.tsv gets a line with the slot and what its own texture was at that moment: finalized, released, superseded, overwritten, uploaded, its storage readable, held out. The set is written with update-after-bind, so every draw of the submission that samples the slot reads the stand-in from then on; the check at the marks' read-back comes a frame later and finds the slot resolved again.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The limit on what a frame's pool refreshes may spend creating textures was charged with the whole refresh, including its check of every entry the pools hold. In Kakariko that check takes 0.8 ms a submission, six submissions a frame, so most of the 6 ms was gone before a texture was made and the frame's later refreshes made none: 87 refreshes in 600 frames, with 1,090 slots left between them. The game moves about thirty textures to new storage every four or five frames there, and the ones a refresh left were on screen as their grey stand-ins for a frame; a player's recording shows three lamp posts turn grey for one frame that way. The limit now counts the time the lookups spend making entries and uploading them the first time.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game's line width was dropped at the call and every line drawn 1 pixel wide; the game draws two lines a frame at 4.5 pixels into a 144x144 mask. The width is now recorded with the draw state and set as dynamic state for draws of the line topology class, held to the device's range. Only pipelines of that class list the new dynamic state, so the others keep their entries in the pipeline caches and the driver's. line_width = 0 draws every line 1 pixel wide as before.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The workers have no chunk to record while the snapshot copies the uniform ranges a submission binds (about 700
regions, 0.7 MiB in Hyrule Field), so the replay thread now hands them slices of it through vk_exec_par, a loop the
workers take between groups. Without workers the copy runs on the replay thread as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With NX2NAVI_REPLAY_PIPE=1 (off by default) the submitting thread hands a group's chunks to the workers, takes chunks
of it itself until none is left to take, and goes on with the ops after the group in a new command buffer after the
chunks' places in the part (vk_sync_append_later), also into the next group's front pass.
Up to four groups are handed out and not in their part yet; their chunks wait in one queue in the order of the stream.
The submitting thread waits for them only where the order needs it: for room, before a part goes to the GPU, before
copies and texture or buffer clears, where DLAA's run or the contact shadows' hook acts, and where a lookup would make
a texture entry or take back a retired one (the op goes again afterwards, as a chunk's does in turn).
What the chunks read stays as the stream had it while the submitting thread runs ahead: uniform snapshot drops count
from their place in the stream, a chunk reads only the inline uniform updates before its group, the HDR present's
source goes by stream position, the texture pool set syncs under the chunks' lock, each group keeps its own render
conditions, occlusion segments and closed query slots, and the queries after a group's last report go into the next
segment made after it. A group's first chunk runs its pass hooks after the group before began its pass; turns wait
for every earlier chunk, of earlier groups too. Locks the chunks take, the submitting thread takes while it is behind.
Draws keep the sampled-texture descriptors they resolved per draw context and reuse them without the texture lock
while their slot is unchanged; the workers waited for that lock at nearly every draw. Texture lookups that change
nothing no longer wait for their turn. The perf line says where the submitting thread waited, what the chunks took,
and which texture lookups waited; NX2NAVI_GPU_TIMELINE also shows the chunks and the waits.
Off by default because it does not pay yet: in Hyrule Field with 3 workers it shortens the replay (11.5 against 12.1
ms a frame) but not the frame (49.2 against 49.6 fps in the same batch). The GPU gets a group's commands only once its
last chunk is recorded, so the main thread's wait for the GPU after the frame's first submission grew by 0.8 ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NX2NAVI_VRAM_BUDGET_MB changes only the number the decisions compare with. The ballast takes that much device-local
memory right after the allocator is made, in dedicated buffers of 256 MiB, and holds it until the allocator goes, so the
driver's own behaviour at its limit (slow allocations, memory moved to system RAM, refusals) shows as on an 8 GB card.
Checked on an RTX 5090: 24000 of 24000 MiB taken and held; through eight reloads of Kakariko the use went past the card
(32,218 MiB at the end) and Kakariko fell from 118-151 fps in the first four rounds to 10-24 fps in the last four. Texture
detail was still chosen as full: the choice reads the driver's budget, which the ballast does not lower.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Maxwell samples a texture by its own descriptor, so a 2D texture under a 3D sample gives its texel at (u, v). Vulkan
has no 3D view of a 2D image, and get_view found no view for such a binding: the draw sampled a stand-in. Such a
texture (plain colour, one sample, up to 1024 x 1024 texels) now gets a 3D image of one slice with all of its levels,
made in the upload batch and copied again when the texture was uploaded or drawn into since, or another layer is
asked for (vk_texture.c vk_texture_flat3d_locked). NX2NAVI_TEX_FLAT3D=0 gives the stand-in as before.
Seen in Kakariko: two of the game's 4 x 4 RGBA8 textures are sampled as 3D textures, and each got its copy; the runs
through eight reloads at 60 and 144 fps ended without errors.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Stage 2 of NX2NAVI_REPLAY_WORKERS (default 0, the replay as before). A run of draws is cut into groups: a group ends
where the render targets change after its first draw or clear, and before an inline uniform update, a mesh draw and a
samples-passed counter op, which the submitting thread replays itself in the order of the stream. A group of 64 draws
or more is first walked by a front pass on the submitting thread: it applies the state and binds, settles the CPU side
of the timestamp reports and decides the render conditions in the order of the stream, and copies the replay state at
the first op of each chunk. The workers and the submitting thread then take the chunks in order and record each into a
command buffer of its own, which vk_sync_append puts into the part in the order of the stream.
The frame's pass hooks (contact shadows, DLSS) run in a group's first chunk, which the others start after. What still
depends on the order between chunks waits until every earlier chunk of the group is done: a texture lookup that would
make or take back an entry returns nothing and the chunk replays the op again in turn, and so do the contact shadows'
pass, per-object motion and the HDR pass's source. The tables the chunks share take locks (the shader table, the
descriptor lists, mirror use and GPU write notes, uniform snapshot drops, target frames, the DLAA camera votes and the
previous-frame motion notes); each chunk keeps its own occlusion query open, its own feedback memo and no pass marks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Stage 1 of recording a submission on several threads. A submission's draws come in runs between ops that have to
stay in the replay's order on its own thread (dispatches, copies, texture and buffer clears, events, the game's
barriers, calls). With NX2NAVI_REPLAY_WORKERS=1 a run of 16 draws or more is recorded by a worker thread: it takes a
copy of the replay state, records the run into a command buffer of its own pool with a draw context of its own, ends
it behind a full barrier and hands the state back. vk_sync_append puts that command buffer into the part between the
replay's own pieces before and after it, so the GPU runs everything in the op stream's order. The submitting thread
waits for each run, so every side effect keeps the replay's order; this stage checks that a run recorded apart from
a copy of the state gives the same pictures. The default, 0, replays as before.
walk's handling of the ops that do not steer it moves into op_one, which the worker uses too. NX2NAVI_REPLAY_RUNS=1
logs every 600 frames how the draws fall into such runs and which ops break them. The draw replay's hot functions load
their recording context once instead of at every use.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The BC3 encoder's colour half is a four-colour BC1 block (c0 above c1, or every index 0 when they are equal), so a BC1 image of an opaque texture decodes to exactly the texels the BC3 one did. The encoder writes that half alone with its specialization constant BC1 set; its push constants are as before, so the BC3 pipeline is unchanged.
Every ASTC texture the CPU provides is made BC3, and its first upload checks its blocks while it copies them into staging: when all decode with alpha 255 (tex_astc.c astc_blocks_opaque, from the block header for all but the endpoint modes with alpha, which are decoded), the entry gets a BC1 image in place of the BC3 one before the decode. Later uploads into a BC1 image check again and go back to BC3 for content with alpha. A large texture's copy and check run on the ASTC decode workers, so its first upload copies faster than before. A check of its own where the texture is made cost 1.7 s of the render thread over a seven-minute teleport tour.
On that tour (Kakariko Village, the Graveyard, Death Mountain Trail, Kokiri Forest, Hyrule Field, RX 7900 XT), against BC3 alone in the same batch: the ASTC textures in Hyrule Field at the end 2,568 instead of 3,104 MiB, video memory at its peak 11,814 instead of 12,374 MiB, process commit at its peak 25,539 instead of 26,139 MiB; the first 7,200 frames in 93.7 instead of 101.3 s and the run's slowest 1 % at 24.1 instead of 21.1 fps. --probe-astc checks the header test against a decode of every generated block, the loop, its copy and the worker pool against it, and each BC1 block against the colour half of its BC3 block. NX2NAVI_ASTC_BC1=0 (astc_bc1 = 0) keeps every ASTC texture BC3; the sampling probe NX2NAVI_ASTC_BC_PROBE it replaces is gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A staging buffer, a transient buffer of the replay or a descriptor pool that the driver refuses for memory used to end
the game at once. Now the buffers kept for reuse go back to the driver first: the staging cache, the staging arena's
free chunks, the write-back snapshot pool and the headroom's spare blocks (no new spare block for 30 s after that), and
the allocation is tried once more; only a second refusal ends the game. On integrated GPUs the device-local heap is the
machine's RAM and fills before the commit checks see anything: staging buffers of 11 KiB to 16 MiB refused there ended
the game in Hyrule Field and on the first scene of play (#465, #567).
NX2NAVI_STAGING_FAIL_AT=n (diagnostics) takes the n-th staging buffer as refused once, to test the path.
Check: a Kakariko run with NX2NAVI_STAGING_FAIL_AT=300 logged "staging buffer of 524288 bytes refused (-2): 348.2 MiB of kept buffers and spare
blocks given back, made at the second try" and played on to the end of its script. The transient buffer and descriptor
pool paths call the same give-back and were not forced.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The save at exit now copies the cache only once the builds already in the driver have finished, with new ones held back meanwhile, as it already did on other drivers. Intel's driver crashed copying a cache while builds ran into it, and when the window closes the game's save is written after the pipeline cache, so a crash in that copy would lose it. The case the save at exit missed, a window closed while the boot's prewarm workers built pipelines back to back, is covered by holding new builds back: a build from the file takes about half a millisecond. The prebuild's comment keeps why its default is two threads, with the measurements of one thread for the rest of the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HDR on is the game's scene through the observer-response mapper, anchored to the game's own mid grey and tone slope, with half of the hue bend of the game's clamp: the defaults the menu had. The tone mapper choice, the mid grey, the tone slope and its match, the hue clip, exposure, highlights, shadows, contrast, saturation, highlight saturation, blowout, flare, hue, grade and gamma are gone from the menu, the settings table and the example ini; a file that still sets them works as before, the keys read by nothing and logging nothing. The menu's HDR row is Off and On, with the peak, game and HUD whites under it. The game's own HDR is still there for a file that sets hdr = native, and the row lists it only then. The luminance mapper and its grading code, which no setting reaches any more, are removed from the tonemap library, and the support buffer carries one vec4 for it.
The dark tones of a dark scene sat far above black: the present showed the game's sRGB-encoded picture as that encode decodes, linear near black, while the game is graded for a display of gamma about 2.2, and since the observer-response mapper became the default the 2.2 correction ran with the luminance mapper only. A scene value of 0.003 came out at 0.29 nits at a white of 350 nits, where a 2.2 display shows the game at 0.015. The present now always shows the picture as a 2.2 display would, and the tonemap aims its peak lower by that correction's inverse, so the brightest light still reaches the display's peak; the same value comes out at 0.017 nits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A shot taken from an HDR10 swapchain (the menu's test hook, NX2NAVI_SHOT_EVERY) now writes the picture's luminance in nits to the log, the darkest pixel, four percentiles and the brightest, and its pixels as the swapchain holds them beside the PNG. The PNG of such a shot shows the HDR display's light at the HUD's white through the power 2.2, not the sRGB curve, so a dark tone the HDR display lifts looks lifted in it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
That wait ends when the GPU has run the submission's own commands (wb_split = 1). The completion thread was then still
at the last frame's submissions, so the occlusion counts, counter reports and event values the game reads next reached
its memory after it had gone on. A player's capture in Hyrule Field shows the result: trees, ground and walls lose
their direct light for single frames about every 36 frames, 57 of 1,800 frames, and with the fence's wait
(wb_split = 0) the same place showed none.
The fence's wait also covers the rest of what the completion thread does for those submissions, 0.23 to 0.40 ms a
frame of page stamps the game does not read. So those results now have a queue of their own
(vk_completion_add_result), and the waiter runs the ones due for its submission and the ones before it as soon as
the GPU's signal is there; the completion thread runs them the same way, ahead of its other callbacks, one runner at
a time and in the order they were queued. wb_split = 3 is the bare wait as it was, to measure against.
Checked: it builds, the launcher tests and the address table check pass, and the player's hand test of this wait at
that place showed no such frame. Not measured: no scripted run of it was made (the one scripted run with the bare
wait in that field shows 1,170 occlusion counts a frame written late and no dark frame, so the script does not
reproduce the fault), and its cost against the bare wait is not known.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The author of the pull request it was ported from closed that request on 2026-11-11 with the words that they give no
permission to use its code. The history (NX2NAVI_VA_REPORT, runtime/vk_vaddr.c, the stack walk it used and its notes
in the docs and the example settings) goes; the lost device's report keeps the breadcrumbs, the pass marks, the video
memory and the driver's fault information.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The author of pull request #353 closed it on 2026-11-11 with the words that they give no permission to use its code. Its port (3134f524) goes: the mark of a pipeline that declares the table (VkPipeInfo.gpa, vk_pipeline.c pipe_add) and of the part that draws with it (vk_mem_gpa_use in vk_exec_draw.c bind_resources and mo_emit), the sync of the table's pools in every such part's prologue (vk_mem_gpa_sync), the submission with a callback in the replay's place as it stood (vk_sync_probe_submit), and --probe-vkmem's read through the table with its shader (test_gpa_read, runtime/shaders/gpa_read.spvasm).
In its place, after pull request #551, which was written without that code: a shadow pool goes into the table and onto a list of the table's shadows (vk_memory.c shadow_table_add); the record of a binding of the table notes the guest submission (vk_exec_draw.c ssbo_info, vk_mem_shadow_table_read); and vk_mem_shadow_sync brings the CPU's writes into every shadow on the list once for that guest submission, before the part is submitted. Once is enough, because the copy-ins read the guest submission's write-watch snapshots, which a second sync would find unchanged. Measured by #551's author on Linux (RTX 4090, Kokiri Forest): 113 and 76 frames over 25 ms in 75 s against 217 and 429 with the port, 43 against 41 fps, the picture complete in both.
What this line had built on the port stays, on the new sync: the test that passes over a pool with nothing written (shadow_pool_clean), the upload of the same pages into a table pool's VRAM mirror, the write-back of stores through the table (NX2NAVI_SHADOW_TABLE_STORES, table_wb_cb, now asked once per guest submission that binds the table) and the counts of NX2NAVI_SHADOW_CHECK. The probes that record their own commands (the lost-device probe, --probe-vkmem's table parts) call vk_sync_submit_own, written anew. vk_mem_shadow_storage stays: one line that returns the mode. Finalized pools in the table were already kept for vk_mem_shutdown here.
--probe-vkmem has a check of its own for the sync (test_table_sync): the shadow of a pool that is never bound keeps its old word through a CPU write and a guest submission that does not bind the table, and holds the new one after a guest submission that does. It passes with NX2NAVI_SHADOW=1 on Windows (RTX 5090), as do the store check with NX2NAVI_SHADOW_TABLE_STORES=1 and the probe without shadow storage; --probe-devlost ends as before. Not run: the game, with or without shadow storage, and anything on Linux.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A pipeline cache over the size limit was dropped at every start and, since the file is no longer written in play, never replaced: every start began empty. The play file is now folded in at the next start whatever its size when the file beside it is over the limit.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
auto turns the fallback on for a device without VK_EXT_mesh_shader, 1 for every device (testing), 0 never.
mesh_fallback_mb sizes the buffers the passes write. Nothing draws through it yet.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Two descriptors can name one CPU-written storage: one whose content the cache takes from the CPU, and a second with a texture flag for which it does not. The second has no upload of its own and its slot shows the first one's image while that entry is live. Once the first is released, a lookup of the second's slot makes it an entry of its own, start_at destroys the released first one, and the new image starts cleared and is never uploaded; the slot shows it from then on, also after the first descriptor is registered again. The same happens when both are released and the texture pool refresh looks the second's slot up before the next texture arrives in that memory.
With tex_split_fill = 1 (the default) start_at gives such an entry the storage's bytes: by a copy from the released CPU-written entry it is about to destroy when that image is current and alias_compatible allows, else by an upload from the storage. The image then follows the storage as a CPU-written texture's does until the GPU or WriteTexels writes it; 2 fills it once, 0 is the behaviour before. Depth, stencil and multisample images, pools without CPU access and storage over 32 MiB are left out, and an entry that is to be filled gets a new image instead of a released entry's, since a reused image goes through its first transition after the upload batch. The perf trace counts the copies, the fills with their bytes and time, the fills made again after a write and the entries left empty.
--probe-vkmem makes both sequences with the three values and reads the second descriptor's image back: zeros with 0, the storage's bytes with 1, and with 2 the bytes of the texture that was in the memory before when both descriptors were let go of. One case makes the entry inside a recorded submission, through a hook that lets the probe stand in for a replay, and there the content comes by the copy.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The library creates its pipelines itself and names no pipeline cache. It is now handed pipeline creates of the runtime's in the place of the device's two, and a create without a cache is asked of the pipeline cache first and compiled into the play cache otherwise. ffx_pipe_cache = 0 turns it off. --probe-ffx-cache makes one upscaling context without a window or the game and says where its pipelines came from, and tests/ffx_cache_check.py runs it.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With shadow storage a write-back at a fence copies a page that has no base copy whole from the shadow into guest
memory. Every write the replay records gets base copies, so such a page means the pool the write was noted on was
finalized before the fence and another was made at its address: the new record's shadow is a copy of guest memory
from its own start, holds no byte of that write, and went over everything the CPU had written to the page since.
The page is now left alone when the record is younger than the submission whose fence it is, or when the CPU has
written the page since the shadow's last copy-in; the shadow line counts such pages.
--probe-vkmem has the case: with NX2NAVI_SHADOW=1 it fails without this change (0x11 over the CPU's 0x22, with
imports and with mirrors) and passes with it, as does the run without shadow storage.
Whether a game does finalize and remake a pool inside that window was not observed in play.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>