Commit Graph

277 Commits

Author SHA1 Message Date
chrg6
85089408f0 Merge main's replay workers default and menu row into the 0.10.0 line.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:06:04 -05:00
chrg6
264dbe42cc Merge the stability and memory pass into the 0.10.0 line.
Conflicts: the settings key lists and section maps take both sides' entries.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 21:49:17 -05:00
chrg6
1f5ee67f7e Give every skinned character motion vectors of its own, not the player alone.
A scene draw whose vertex shader reads a matrix palette and whose vertex layout feeds its joint inputs unsigned integers is drawn a second time into the motion vectors with last frame's blocks and camera, as the player's meshes are, with the same depth test and the same guard for bones that turn sharply. Which draw of last frame it continues is decided when the vectors are made, so the replay's threads cannot change it; a draw in doubt keeps the camera's motion. The player's own draws stay with their ownership records.

skin_motion (NX2NAVI_SKIN_MOTION) is 1 by default and 0 turns it off. The motion status line now counts the skinned draws seen, those drawn with their own motion and the others by reason. It has compiled and passed its checks; it has not been played.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 20:03:59 -05:00
chrg6
97c3bac3bd Keep a small buffer clear and the counter reports of the same record in the order of the stream.
A ClearBuffer or ReportValue is a fill the GPU makes where it stands in the stream, and guest memory has its bytes once the GPU got there. A counter report reaches guest memory as a CPU write after its submission's fence, and a render condition reads the record when it is replayed. So a report followed by a clear of the same record ended as the report (in one submission always, across two when the completion thread was behind the GPU), and a condition replayed after the clear read what memory held before the fill, or the 0 of the report the clear had overwritten.

A clear of at most 256 bytes into CPU-visible memory is now also applied at its place in the replay to the records it covers that a counter report went into: the covered bytes get the value in guest memory at once, reports replayed before the clear leave those bytes alone when their write comes, a condition reads them from memory, and a report replayed after the clear writes the whole record as before. The GPU's fill is recorded as before. Other small clears stay the GPU's fill alone: the GPU reads guest memory too, at once in an imported pool and through the next upload of the written page in a mirrored one, so a write ahead of it into a draw count or an atomic counter would reach passes that still want the old value. NX2NAVI_CLEAR_SMALL_CPU=0 turns it off.

Whether the game clears counter records is not known. The pass timing captures of 75 scripted runs show one buffer fill a frame and nothing else about it, and the frame dump does not list buffer fills. The periodic vk_usnap line now counts the small clears, the last one's size, value and address, how many covered a record with a report, the reports into bytes cleared before, and the report writes that left cleared bytes alone.

Checked with a build of the dev exe, the launcher tests, the device address table check, and a scratch link of vk_exec_xfer.c against stubs that replays reports and clears in both orders. Not run in the game.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 19:49:40 -05:00
chrg6
433cc62cce Leave the shared DLSS feature off until it has run on a card.
It was compiled and linked only, and in this game the dynamic resolution's steps may never change the scene's render size, so it has nothing to gain by default yet. dlss_range = 1 turns it on.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 19:43:57 -05:00
chrg6
8273d881a4 Run the smaller render sizes of a DLSS mode on that mode's feature, with the history kept.
Each render size had a DLSS feature of its own, so a step of dynamic resolution or a screen at another share cost a
feature creation and a new history. The feature created at the render size of the DLSS mode set now also takes every
smaller render size that DLSS reports for its output size and quality value (the optimal settings callback's dynamic
minimum), as the sub-rectangle of that frame's own images. A size above the feature's own, below the minimum, of
another shape or output size, or met under another mode still gets its own feature, and a refused evaluation turns the
sharing off for the run. The first frame of another size is still left out of the per-object motion pass and still
starts frame generation anew.

The setting is dlss_range (NX2NAVI_DLSS_RANGE), 1 by default: a run whose render size never changes creates and
evaluates its feature with the parameters it had, and adds one query after the creation. The log says for each feature
which render sizes it takes, and the status line counts the changes of size that kept the history against those that
made a feature. Compiled and linked only; no evaluation of a shared feature has run on a GPU.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 19:43:49 -05:00
chrg6
bc256496cb Build task and mesh shader pipelines without the driver's optimiser on AMD's driver for RDNA 1 and 2, unless vk_noopt says otherwise.
That driver loses the device in play ("No fault detected", a timeout) on RX 6600 to RX 6950 XT cards in every version from 0.6.0 to 0.9.2, with the pipeline library on or off and the lazy write-back on or off (#591, #602, #659, #683, #684, #689, #635, #719, #279, and fourteen of twenty sessions in a player's launcher log of an RX 6800). Where the pass marks name a pass the GPU was in, twelve logs of five reporters, its first draw is a mesh pipeline: mesh shader ba4302f1 with fragment shader f64a96dd in nine, the one-draw pass of 1bbdb17e with 6cc3a476 in three. The five logs of 0.9.1 and 0.9.2 stop between the compute dispatch before such a pass and the pass. vk_noopt = mesh was there as a test switch for this suspicion and no reporter had run with it.

It is now what an unset vk_noopt means on that driver branch; every other driver keeps 0, and vk_noopt = 0 gives the optimised pipelines back. The picture is the same; the mesh and task shaders run slower, by how much is not measured, and those pipelines are built once more because the flag is part of the driver's cache key. That the optimiser is the cause is not shown: no AMD card ran this.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:31:56 -05:00
chrg6
641c866e8a Catch up after a stall of the audio renderer by rendering the owed frames without queueing them.
A frame that was not rendered when it was due stayed lost: the timer set its
deadline to now once it was more than 100 ms late, and the device-paced path
only filled the ring to its target again, so after every gap the sound was
heard that much later than the picture it belongs to.

Frames that are owed are now rendered and dropped: mixed in full, so the
voices, the effects and the sinks the game reads back advance, and not queued
for the device, whose queue is filled to the same target afterwards. While the
device paces, what is owed is the silence it played for want of frames,
counted in its own samples from an underrun until the prefill is queued again;
the wait for the first prefill and anything owed across a stop do not count.
On the timer a frame is owed when its deadline passed a whole frame ago. A gap
of more than 3 seconds is not caught up: the sound goes on from now.

NX2NAVI_AUDIO_CATCHUP=0 turns it off and keeps the old timing. The audio
statistics line counts the catch-up frames and the gaps that were too long,
and tests/audio_mixer_check.py checks the device's side of the accounting.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:17:48 -05:00
chrg6
42d16e7f0b Ramp a changed volume across the audio frame instead of applying it at once.
The mixer applied each voice's mix volume and each splitter destination's
volume to a whole 5 ms frame as one constant, so the level jumped at the
frame's first sample whenever the game moved a volume, which is heard as a
click. It now keeps what each voice and each splitter destination was mixed
with in the frame before and goes from there to the new value in equal steps
across the frame's samples, as the console's renderer does. An unchanged
volume stays on the constant path.

A voice that has just started, one that was silent in the frame before or was
moved to another mix or splitter, a destination that is new or was moved, and
the first frame after the renderer starts take the new volume at once.

NX2NAVI_AUDIO_RAMP=0 turns the ramps off. The audio statistics line counts the
render passes that ramped a volume. tests/audio_mixer_check.py builds the
mixer with the rest of the runtime stubbed and checks the ramps and the cases
that must not ramp.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:17:48 -05:00
chrg6
202fd47ceb Let the flight recorder dump on its own when one frame flashes.
With flight = 1 and its thumbnails kept, the recorder now also writes a dump when a frame's picture differs strongly from the frame before and the frame after while those two agree, which is what a one-frame flicker looks like. Each thumbnail is reduced to 16x9 cells of mean brightness where the present thread already sees it complete, and a frame is a flash when at least three cells are more than 24 of 255 brighter or darker than in both neighbours, the neighbours being alike in those cells, around them and over the picture as a whole. A camera cut, a fade, a pan and shapes crossing the picture are no flash, and a frame beside one without a thumbnail is not judged. The dump is the one F8 writes, named "flash" with the frame's number in its header line, at most one every 30 seconds. flight_flash = 0 turns it off; flight_flash_diff and flight_flash_cells set the two thresholds.

On the thumbnails of earlier dumps the defaults flag the frames whose scene was white once and nothing in the runs without that fault. tests/flight_flash_check.py checks the test itself on drawn pictures.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:16:30 -05:00
chrg6
95dc476ee7 Scale the scene with the edge-adaptive filter where the game's own upscaler ran.
The stand-in for the game's upscaler enlarged the scene with a linear filter, which is softer than the console's picture. It now enlarges with the edge-adaptive filter the present already scales to the window with: the same shader, built a second time with a constant set so it squares what it filtered, as the linear pass does. The stored square-root values are filtered as before and the decode is the same. standin_filter = bilinear brings the linear pass back, and the setting is live. The linear pass also stays where nothing is enlarged and while DLSS or FSR 3.1 runs, since that upscaler scales the scene itself and its picture goes over the stand-in's. The movies do not go through this pass and are not changed.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:16:18 -05:00
chrg6
823e0cdcd4 Raise the pipeline cache's size limit to 1024 MB, and leave never-drawn list pipelines to their first draw on a machine short of memory.
The limit was 512 MB, and a file over it starts the run empty until a play file replaces it. With the pipeline list of 0.9.1 one run builds more than that: on an RTX 2080 Ti (#722) pipeline-cache.bin held 551 MB and the play file the run then wrote 541 MB, so both were dropped at every start, 7,247 of 8,531 pipelines were built again each time (17 s of the boot) and 541 MB were written in every session. Seven of the players' logs read here have a file over 512 MB, five of them between 517 and 691 MB. At 1024 MB those are read, the play file is folded in once and the loop ends; a start that still finds both files over the limit now says so.

pipe_seed_boot (auto, 1, 0) decides whether the boot builds the pipelines of the shared list that the install has never drawn. Each is a pipeline the driver holds for the whole run: the boot's pipeline stage went from about 1.6 GB of commit on 0.8.0 to 3.9-4.4 GB on NVIDIA cards with the list (1.5-1.8 GB on AMD's driver), and 0.3-0.6 GiB of video memory. auto, the default, builds them as before except on a machine that starts with less commit free than the game takes in play, the start's own memory warning: there they are made at their first draw from the pipeline cache and recorded as the install's own. Mesh pipelines are built at boot either way. Compiled; not run in the game.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:13:40 -05:00
chrg6
495d118e9e Add an experiment that turns the game's occlusion queries off, off by default.
The new patch set occlusion_off makes six reads of two parameter bytes read 0: CreateZPrePassOcclusionQuery and CreateSamplesPassedQuery, where the game first writes their options and where an update compares and stores them. The game is then left without its occlusion queries, their reports and the conditional renders that depend on them, and draws what it would have tested: more draws, and no query results to wait for.

patch_occlusion_off = 1 turns it on at the next start. The key has a row in the settings table, which gives the set its default, a section and an entry in nx2navi.ini.example. What it costs and saves in play has not been measured.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:13:30 -05:00
chrg6
2818857d1b Show the middle 16:9 of a wider picture in the picture a save file keeps.
The game draws the whole picture into the 543x306 target of the save's picture, so a picture wider than 16:9 came out squeezed. The new set wide_save has one site in the viewport helper, where it loads the address of SetViewport: a viewport of exactly 0, 0, 543, 306 gets the patch page's two numbers added to its x and its width, without branches or flags. widescreen.c writes them for a picture wider than 16:9 and switches the set on only then; the scissor, set before, keeps the target's size.

C generated before the set existed keeps the other widescreen sets, and the log says that the save's picture is squeezed.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:13:19 -05:00
chrg6
91dd6de969 Make a draw whose shaders write memory wait for its pipeline like a one-shot draw.
A draw into targets the game renders every frame is left out while its shaders or pipeline build, because the next frame draws it again. A storage buffer the shaders write or an image they store into is not redrawn that way: with the draw left out, that memory keeps what it held for everything that reads it. Such a draw now takes the wait a draw into one-shot targets takes, from the frame's wait pool, and is skipped only at the end of it. Only the stages already translated can say that they write; a draw whose writing stage is still being translated is skipped as before. draw_writers_wait = 0 turns the rule off, and the periodic line about waited draws counts the draws that waited by it alone.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:12:51 -05:00
chrg6
afe44e0e54 Let the device address table read a new VRAM mirror only once the mirror's first copy has run.
A mirror is made while a submission is recorded, and its first copy of the pool is in that submission's prologue. The table's pages moved to the mirror at once, and the table is memory the shaders read as they run: every part already handed to the queue read the mirror through it before the copy had run, memory nothing had written yet and, on a card over its budget, a block the driver had not made resident for those parts. A GTX 1650 4 GB lost its device that way at area loads in every session of 0.7.1 (#507): six reports of a GPU read fault at byte 0 of a mirror made in the faulting submission, each the first byte of a new 2 MiB-aligned block, with mirrors being made over the budget, and none with the table kept empty. The mirror code is the same in 0.9.2.

Now the pages keep reading the imported buffer and take the mirror as their twin, so what shaders write through the table goes to both and what they read is guest memory, as before the mirror existed. Once the GPU has finished the submission that holds the copy, the pages move to the mirror with the imported buffer as the twin. gpa_late = 0 moves them at once, as before. tests/gpa_check.py covers the new table step; the mirror side was compiled and run through --probe-vkmem, not played.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 15:09:42 -05:00
Vasilis Manetas
eaf10677fa Import guest memory as dma-bufs through udmabuf on Linux instead of keeping shadow copies of it.
On Linux every CPU-visible pool had a host-visible shadow copy, because amdgpu treats a host-pointer import as a userptr object that it looks up again at every submission and invalidates whenever the write watch or a freeze re-protects its pages. Now the watched reservations are shared mappings of one memfd, /dev/udmabuf makes dma-bufs of page ranges of it, and the device imports them (VK_KHR_external_memory_fd, VK_EXT_external_memory_dma_buf). A dma-buf pins its pages once and is not tied to the process's page tables, so protection changes leave the GPU's mapping alone, and nothing is copied.

RADV puts every imported memory object into every submission, so pools share their imports: guest addresses are cut into 64 MiB spans (NX2NAVI_DMABUF_MB), and each pool is a buffer bound into its span's memory at its offset. A new span is cut back at the spans already there, so spans overlap only where a pool itself lies across an older span's edge, since amdgpu counts every span's pages in its GTT use. A decommit punches the pages out of the memfd, or zeroes them in place where a dma-buf pins them, and the pages a freed span pinned that nothing committed go back to the system.

It is on by default where /dev/udmabuf opens, udmabuf's size_limit_mb is 1024 or more, the device has both extensions and NVIDIA's kernel module is not loaded. A start-up probe imports one page as the pools will be; any refusal keeps the shadow copies, and the log says why. NX2NAVI_DMABUF=0 keeps the copies. tests/platform_dmabuf_test.c checks the shared mapping without a GPU, and docs/building.md ("Memory") describes the imports and what they need.

RX 6800 XT (RADV, Mesa 26.2.6), one build, interleaved pairs with NX2NAVI_DMABUF=1 and 0: Kokiri Forest 60.7 against 40.3 fps (3 pairs, +51%, standard error 0.4), 1% low 50.9 against 34.0, frames over 25 ms 5 against 768; Hyrule Field 55.7 against 42.4 fps (2 pairs, +31%, standard error 0.4). No pool was left without a span, no span was refused, and --probe-vkmem passes with and without the imports.
2026-11-12 15:00:27 -05:00
chrg6
cacf458b08 Say in a lost device's report what the GPU was about to do when it stopped between two marks, and add draw marks.
A pass mark names the pass or dispatch the GPU had started and the last it finished. When the two are the same mark the GPU stopped in between, and the report named nothing: in a player's log of 0.9.2 (RX 6700 XT) both were one compute dispatch, with 51 later marks made and none started. The report now adds the mark that never started and the kinds of commands the replay recorded between the two (copies, clears, the upscaler, write-backs), which the gap notes already name for the GPU pass timing and now keep for every mark.

draw_crumbs = 1 (off by default, AMD buffer marks only) also writes a mark wherever the shaders or the pipeline state change inside a pass. The device losses reported on RX 6600 and RX 6800 class cards end inside one scene pass of 30 to 100 draws and the draw that hangs is not known; with the setting on, the report lists the shaders of the draws the GPU had not finished.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 14:57:21 -05:00
chrg6
ac3c43ba4d Make a small plain-format texture at its lookup, beside the creation budget.
The budget spreads the streamed, compressed pictures over frames. A texture that is not block-compressed is as often the game's data, a height map or a table, and a draw that reads the stand-in in its place for a frame misplaces geometry or lighting. Up to 24 of them a present, of at most 4 MiB each, are made at once; pool_data_first = 0 leaves them to the budget.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 14:52:26 -05:00
epicmeme546
94dd340fee Turn the replay workers off by default again, and set them in the settings menu's Game tab.
Players' games crashed with three workers on by default in 0.9.1 and 0.9.2: an RX 6700 XT lost its device after
about 18,000 frames, its last mark a compute dispatch of the replay, with an occlusion query slot found unavailable
after its fence just before. The cause is not known yet, so replay_workers is 0 again unless a player sets it. The new
Replay workers row (0 to 8, experimental) writes replay_workers and waits for a restart, as the other restart-only rows.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 14:48:47 -05:00
chrg6
26f3dc47ec Show the low-end GPU mode's settings under its switch in the Game tab, and read them only while the mode is on.
The settings had a tab of their own; they are rows of the Game tab now, listed under the switch once the mode is on after a restart, and the tab is gone. With the mode off every one of them reads as unset, whatever nx2navi.ini or the environment says, so nothing of the mode acts unless a player turned it on; the build reads guest_opt the same way. The notes describe that, and take the white edges in towns and the dropped textures from the known issues to the fixes.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 13:59:43 -05:00
chrg6
d2fbaba1c3 Put the low-end GPU mode in the settings menu's Game tab, marked experimental.
The row sets low_end_gpu, read at start, and says what the mode turns on and that it was measured on one card; its text is there in the menu's four languages. The key is decided again once the settings file is read.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 13:06:02 -05:00
chrg6
2324a74602 Turn the settings for older graphics cards on with one key, low_end_gpu = 1, and leave them off without it.
Mesh shaders as compute, the texture that gets memory of its own, staged mirror uploads and the shorter wait for the GPU, widened write-watch queries, the video memory limits and reserve, early upload batches, the asynchronous replay, the hot-pool rule and the recording thread on AMD cards without mesh shaders were measured on a Radeon RX 580 and run on no other card. Each keeps what 0.9.1 did unless the key or its own setting says otherwise; the key gives the defaults the way the device profile does. The notes describe them as that option, hold main's two new entries in one Changed section, and list the white edges in towns as a known issue.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 13:00:13 -05:00
chrg6
052c60dc0d Merge remote-tracking branch 'nx2navi/main' into release-0.9.2 2026-11-12 12:56:51 -05:00
epicmeme546
385734dcc0 Sharpen FSR 3.1 more below a render scale of three quarters: its own sharpening towards the maximum, and a second, lighter RCAS pass over its picture.
FSR 3.1 was soft at Performance and Ultra Performance, most of all in motion. On a village save, while the camera turned at a steady rate (present screenshots every 0.4 s, the mean absolute Laplacian of the scene's luminance): FSR 3.1 Native AA 6.7, FSR 4 Performance 5.9 and Ultra Performance 5.4, FSR 3.1 Performance 4.0 and Ultra Performance 3.3. The library's own input checks found nothing wrong, and its tuning constants (velocity factor, accumulation per frame, shading change scale, behind the test switch NX2NAVI_FFX_KEYS) gave nothing or took detail away. Its own sharpening at 100 instead of the default 80 gave 5.0 and 4.1.

Now the share of extra sharpening grows from none at three quarters of the output's width to all of it at half (vk_dlaa_fsr3_boost). FSR 3.1's own sharpness goes that share of the way to its maximum, and its picture gets a second RCAS pass (shaders/dlaa_sharpen.comp, AMD's FSR 1 header with the linear light taken through c / (1 + max c) and back), before the HUD is drawn. Both follow the sharpness slider; 0 turns them off, and NX2NAVI_FSR3_SHARPEN=0 leaves the second pass out. At RCAS's full strength the pass took Performance to 8.2, past Native AA, with grain on every surface, so it runs 1.5 stops weaker: Performance 5.7, Ultra Performance 4.7, Quality 5.2. 63.4 fps against 65.1 without the pass. The HDR picture is clean. FSR 4 is untouched.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:50:43 -05:00
chrg6
0533b3028e Keep the asynchronous replay, the hot-pool rule and the -O2 game code off unless a player turns them on.
The three change what every card does: the asynchronous replay can show a dark or flickering frame now and then, the hot-pool rule moves pools into system memory on every discrete card, and -O2 makes each rebuild of the game several times longer. Their rows stay in the settings tab. The USB joystick mapping is described by the device's own name, and the tab's introduction says what its settings are for.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:17:55 -05:00
chrg6
a464ffafbc Merge Tobim6's work for older graphics cards: mesh shaders emulated with compute, video memory kept within the heaps' budgets, staged mirror uploads and the submit wait that goes with them.
Conflicts: the settings key lists take both sides; frame generation keeps the camera-cut handling and logs its counters every 600 frames with the cuts among them; the pass-time mark moves into draw_viewport; mo_desc keeps the pose depth and notes the reader.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:14:58 -05:00
chrg6
88b74fc8f2 Merge branch 'claude/pr-intake-6-43af31' into release-0.9.2 2026-11-12 12:10:44 -05:00
Vasilis Manetas
bfa486c2aa Hand every queue submission to the driver's own submit thread on Linux, so RADV's vkQueueSubmit2 leaves the replaying thread.
Mesa's Vulkan drivers keep timeline semaphores as kernel sync objects, and their queues submit on the calling thread unless a submission waits on a value not submitted yet. The replay hands a part of the frame to the queue each time it splits one off (vk_exec.c maybe_split), so every such vkQueueSubmit2, with the command stream's checks and the kernel's ioctl, ran inside the replay, the thread that limits the frame rate on an RX 6800 XT under RADV.

MESA_VK_ENABLE_SUBMIT_THREAD=1 sends every submission to a thread of the queue's own. vk_device.c mesa_submit_thread sets it before any thread can load the driver, unless the environment sets it already. submit_thread in nx2navi.ini (NX2NAVI_SUBMIT_THREAD) is 1 by default on Linux and 0 on Windows; 0 leaves the driver's own choice. On a Mesa driver the log says which one applies.

Kokiri Forest, 0.9.1, RX 6800 XT, Mesa 26.2.6, 3 pairs of 45 s runs of one build with the setting on and off: the replay took 13.9 ms a frame against 15.0, lower in every pair; frames over 25 ms fell from 910 to 406; the frame rate went from 40.0 to 40.8 fps, within the runs' noise.
2026-11-12 12:09:37 -05:00
chrg6
0985e80466 Leave Link's own motion vectors off until they have been played, and take their settings through nx2navi.ini.
The pose motion vectors for Link and his attached equipment were on by default for game 1.1.1 and had not been run in
the game on this version. selective_motion = 1 turns them on. Its settings are listed among the known ones, so
nx2navi.ini takes them without an unknown key line, and the rotation threshold is read through the settings instead
of from the environment alone. nx2navi.ini.example describes the switch.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:09:37 -05:00
chrg6
a654d079e1 Keep a released texture's image while a registered slot still names it.
The game finalizes a texture object while another one it initialized at the same storage with the same parameters stays registered in the pool, and the entry the two share is released all the same. Two frames later its image went to the next texture of its parameters and the entry was dropped; the slot then had nothing to show, because the pool makes no entry for storage the CPU cannot read, and kept its stand-in until the game drew into the texture again. Ocarina's 384x384 shadow maps are such textures: a player's recording has four slots of them sampled as stand-ins in the frame after three of their images had gone to other shadow maps, and a house front without its shadow in that frame. The reuse now passes over a released entry that a slot which is not finalized names; tex_reuse_named = 1 restores the old choice.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:09:37 -05:00
chrg6
b93219c394 Make a slot's new texture at once when the slot is showing another one.
Ocarina streams its textures by detail level: while the player moves it registers about 32 pool slots with their next level every four or five frames. A pool refresh made 16 of them and wrote the stand-in into the set for the rest until its next round; the set is read as it is when its submission goes to the queue, so an object whose slot was among the rest could be drawn grey for a frame. A player's recording shows 1,525 such slots in 600 frames, each with its texture made later in the same frame. A slot whose entry in the set is a texture's view when it is looked up now has its texture made by that lookup, beside the count budget and the frame's creation time, 64 of them a present; pool_shown_first = 0 leaves them to the budget. The flight recorder also notes a slot that still had no picture when its submission ended.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:09:37 -05:00
chrg6
bd7d140a54 Draw lines as wide as the game sets them.
The game's line width was dropped at the call and every line drawn 1 pixel wide; the game draws two lines a frame at 4.5 pixels into a 144x144 mask. The width is now recorded with the draw state and set as dynamic state for draws of the line topology class, held to the device's range. Only pipelines of that class list the new dynamic state, so the others keep their entries in the pipeline caches and the driver's. line_width = 0 draws every line 1 pixel wide as before.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:09:36 -05:00
Vasilis Manetas
5fee8d7ab2 Hand every queue submission to the driver's own submit thread on Linux, so RADV's vkQueueSubmit2 leaves the replaying thread.
Mesa's Vulkan drivers keep timeline semaphores as kernel sync objects, and their queues submit on the calling thread unless a submission waits on a value not submitted yet. The replay hands a part of the frame to the queue each time it splits one off (vk_exec.c maybe_split), so every such vkQueueSubmit2, with the command stream's checks and the kernel's ioctl, ran inside the replay, the thread that limits the frame rate on an RX 6800 XT under RADV.

MESA_VK_ENABLE_SUBMIT_THREAD=1 sends every submission to a thread of the queue's own. vk_device.c mesa_submit_thread sets it before any thread can load the driver, unless the environment sets it already. submit_thread in nx2navi.ini (NX2NAVI_SUBMIT_THREAD) is 1 by default on Linux and 0 on Windows; 0 leaves the driver's own choice. On a Mesa driver the log says which one applies.

Kokiri Forest, 0.9.1, RX 6800 XT, Mesa 26.2.6, 3 pairs of 45 s runs of one build with the setting on and off: the replay took 13.9 ms a frame against 15.0, lower in every pair; frames over 25 ms fell from 910 to 406; the frame rate went from 40.0 to 40.8 fps, within the runs' noise.
2026-11-12 12:07:19 -05:00
chrg6
b1e8c1427b Merge branch 'claude/pr-intake-6-43af31' into ra-all-test 2026-11-12 11:23:54 -05:00
chrg6
5f10a0012b Merge remote-tracking branch 'nx2navi/main' into ra-all-test 2026-11-12 11:23:49 -05:00
epicmeme546
322d7c0933 Run DLSS or FSR where the game's own upscaler runs, and fill a jittered pass's edge rows as soon as it ends.
With the HUD hidden the screen showed the scene at its render size instead of the upscaler's picture. The upscaler ran at the pass after the game's own upscaler, taken for the pass the HUD is drawn into. Without a HUD the game draws no such pass: the next one is the frame's last, which encodes the stand-in's scaled scene into the 8-bit output. The upscaler's picture went into that target and the last draw drew over it. A player's save with the HUD off showed blocks of render pixels, a picture jumping by a render pixel between frames, and the undrawn edge row in white, at every FSR mode and at Native AA; every test save until now had the HUD on. vk_dlaa_upscaler now runs the upscaler right after the stand-in of the game's upscaler wrote its output image, and puts the picture there (NX2NAVI_DLAA_AT_UPSCALER=0: as before).

The edge fill moves to the end of each pass that took the jitter (vk_dlaa_pass_end), for the pass's colour targets and depth, in one copy of eight regions per image. Filled only before the upscaler, the undrawn row had already been read by the water, the bloom and the anti-aliasing pass.

On a copy of the player's save (HUD off), FSR 4 Ultra Performance, world slowed to 1/20, present screenshots 0.25 s apart: the picture moves 0.00 to 0.02 px between shots (old placement: a jump of one render pixel in 5 of 20), the change on edges is 1.9 against 16.9, and no shot has the white row (half had it, with HDR on). Native AA, Performance with HDR, and FSR 3.1 are steady and clean as well; the save with the HUD on is unchanged. A run through a stream: 0 of 106 shots with a bright bottom edge (20 of 102). Frame rate 58.3 fps against 58.6.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 11:14:16 -05:00
chrg6
a310940003 Merge branch 'claude/gfx-layer-perf-test' into ra-perf-test 2026-11-12 11:01:54 -05:00
chrg6
277f01375a Keep an overwritten texture that is still used.
A texture another target was drawn over is marked overwritten, dropped 600 presents later, and offered to the image reuse first. Neither asked whether anything still reads it. In a player's recording the entry of a second descriptor at the scene target's address was dropped that way and made again in the same frame from a released entry there, whose bits are the scene in another format: one frame nearly black with its colours exchanged, brightness 17 against 102 around it. An overwritten entry a draw, a read or the pool's marks used within those 600 presents now stays, and the image reuse passes over any released entry used within the last 16; tex_overwritten_used = 0 drops them as before.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 11:01:44 -05:00
chrg6
a389f2450f Add a switch that compares textures over 64 KiB by content before uploading them again, and hash eight chains at once.
While the player runs through a town the game moves about 32 textures to new storage every four or five frames, back to back in one block, and a frame after their first upload every page of the block shows a write again. A texture up to 64 KiB keeps a hash of its storage and is uploaded again only when its bytes changed: of those, 0 to 4 in a hundred are (9 of 440 in one recording of 600 frames). A larger one has no hash and 75 to 94 in a hundred are uploaded again, whatever the size and format: 3,034 second uploads in those 600 frames beside 4,233 first ones, the ASTC ones decoded and encoded on the GPU a second time. The frames of the second uploads take 0.9 to 2.5 ms longer than frames without uploads, and the frames after them wait 0.3 to 1.3 ms longer for the GPU (six recordings of one player).

tex_same_big = 1 has textures up to 8 MiB keep the hash too. It is off by default: the bytes are read once more at the first upload and once at the comparison, 15 us each for 300 KiB, which together is about what the second upload takes on the submitting thread (27 us), so what it gains is the GPU's work and whatever else a second upload costs its frame, and that is not measured in play. A texture whose comparisons found other bytes twice in a row takes no hash any more, and an area load takes none.

The hash runs eight chains side by side and folds them, 20 GB/s against 7 for the one chain on a Ryzen 7 9850X3D, which the small textures' comparisons get as well. Each step is still a bijection of its chain and of the word it takes.

The pool log's buckets line counts the hashed uploads and the comparisons when there are any. --probe-vkmem has a case that passes with the switch off and on: the same bytes written again, other bytes, and the same bytes after two rewrites in a row.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 10:49:54 -05:00
chrg6
65dacfa7c7 Ask the write watch once per run of regions in the texture pool's check, and pass released entries by.
At every submission that binds the texture pools the replay checks each listed texture for CPU writes, and takes the write-watch snapshot of the 2 MiB regions that have none yet as the list comes to them: one query a region, since the list is in no address order. Standing still that is 5 to 10 queries and the check takes 0.11 ms. While the player runs through Kakariko or Castle Town the game writes about 32 textures into new storage every four or five frames, a region the CPU wrote is not frozen again for 1,800 submissions, and the check asked for 100 to 500 regions one by one, 2.7 times a frame: 0.5 to 1.5 ms a check, about 3 us a query, in five sessions of one player. The regions are now collected for the whole list first and asked in one query per run of adjacent regions. On this machine 400 queries of 2 MiB take 727 us and one query over the same 800 MiB takes 360 us. The same regions are queried and the same pages stamped, all of them before the list is looked at, as each entry's were before its own look; a run across the edge of a watched reservation is left to the queries by range. pool_presnap_runs = 0 asks region by region as before.

A released entry stays in the list until it is destroyed, the check does nothing for it, and the stamp it compares stays as it was at the release, so one whose region took a write later missed the region check at every submission from then on and was fetched only to be passed by: 1,000 to 6,300 entries a check, with up to 8,192 released entries kept. The list now carries the released state, set at the release and cleared at the take-back, and the check passes such an entry by without touching it or asking for its regions.

The pool log's freshness line counts the released entries passed by, and its snapshot queries count the queries either way. --probe-vkmem has a case for the queries by run.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 10:49:54 -05:00
chrg6
8946fc0201 Leave Link's own motion vectors off until they have been played, and take their settings through nx2navi.ini.
The pose motion vectors for Link and his attached equipment were on by default for game 1.1.1 and had not been run in
the game on this version. selective_motion = 1 turns them on. Its settings are listed among the known ones, so
nx2navi.ini takes them without an unknown key line, and the rotation threshold is read through the settings instead
of from the environment alone. nx2navi.ini.example describes the switch.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 10:44:12 -05:00
chrg6
a374e778fa Keep a released texture's image while a registered slot still names it.
The game finalizes a texture object while another one it initialized at the same storage with the same parameters stays registered in the pool, and the entry the two share is released all the same. Two frames later its image went to the next texture of its parameters and the entry was dropped; the slot then had nothing to show, because the pool makes no entry for storage the CPU cannot read, and kept its stand-in until the game drew into the texture again. Ocarina's 384x384 shadow maps are such textures: a player's recording has four slots of them sampled as stand-ins in the frame after three of their images had gone to other shadow maps, and a house front without its shadow in that frame. The reuse now passes over a released entry that a slot which is not finalized names; tex_reuse_named = 1 restores the old choice.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 10:25:41 -05:00
Tobim6
39db2ae2a1 Video memory: every VMA allocation by the heaps' live budgets, with room kept for FidelityFX
The heap limits were fixed at device creation, and only texture images looked at the budget. FidelityFX allocates
outside VMA (FSR 3.1 contexts, frame generation): 882 MiB of it with 4644 MiB of VMA's filled the 5526 MiB budget of
heap 0 while heap 2 had 1757 MiB free, and an upload submit failed with VK_ERROR_OUT_OF_DEVICE_MEMORY. vmaCreateImage,
vmaCreateBuffer and vmaAllocateMemory now go through vk_vma_budget.c, which leaves out a device-local heap whose
driver-reported use is within NX2NAVI_VRAM_RESERVE_MB (default 512) of its budget; a Lama patches row sets it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 16:23:16 +01:00
Tobim6
306de50589 NX2NAVI_FOLIAGE (full, reduced, off): reduced skips the indirect mesh draws with a task stage (small grass and moss), off every indirect mesh draw (all foliage); a Lama patches row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 16:23:05 +01:00
Tobim6
4718997313 NX2NAVI_SUBMIT_FINISH_KINDS: a settings row (default 31) and a Lama patches row, all result kinds or all but events.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 16:23:04 +01:00
Tobim6
0b4fdac38d Defaults from the RX 580 runs: asynchronous replay, mesh emulation, mirror_hot 25, freeze_idle 1200, native zstd, game code at -O2; freeze and zstd and replay rows in the Lama patches tab.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 16:22:57 +01:00
Tobim6
55ab90c66e Mesh emulation: the stages of a pass's emulated draws run before the pass, in a command buffer of their own.
Each emulated mesh draw ended the pass, ran its stages between four barriers and began the pass again: a pass of 20
emulated draws became 20 passes, and on an RX 580 6 to 7 ms of a frame's 30 ms of GPU time went to the gaps between
passes (gpu_passes in Kokiri Forest: 8.7-10 ms per frame outside the game's passes and dispatches, 6.3-7.7 ms of it in
273-306 gaps with barriers only; 71 emulated draws a frame, 36 of them indirect). Now the first emulated draw of a pass
ends the part there (vk_exec_split_now), so the pass begins a new part, and the stages of every emulated draw of that
pass, the indirect ones' ring entries included, go into the part's pre-pass command buffer (vk_sync_pre), which the
queue runs after the mirror prologue and before the part; the pass is not split again. NX2NAVI_MESH_EMU_BATCH=0 (Lama
patches: Mesh emulation before the pass) brings the split back.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 16:22:35 +01:00
Tobim6
9259149527 Settings menu: a Lama patches tab with the settings of the RX 580 patches
Released textures kept, top texture levels left out, hot pools in system memory, the heap limit, the upload batch
limit, the kept ASTC buffer, mesh emulation and its arena and task records (greyed where the GPU has mesh shaders),
the overwritten-texture fix, the vector index fix, -O2 game code, pass times and the frame dump key. Each key gets a
row in the settings table; make_game.py reads guest_opt from nx2navi.ini when the environment does not set it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 16:22:31 +01:00
Tobim6
703e9fecd9 Textures read after another image drew over their pool memory get memory of their own.
The game overlaps transient render targets in its memory pools, and the replay binds their images into that memory.
An image of another format or size drawn over an image's memory leaves the GPU's tiled, compressed texels of the
other image there. Ocarina's volumetric fog reads its 360x202 RGBA32F fog-volume texture at the start of a frame,
before drawing it again, and the 1440x810 R11G11B10F bloom target had been drawn over that memory at the end of the
previous frame: the fog lighting took those texels as volume distances and types (values from 1e-12 to 3e33 in a
frame dump where the texture holds 9 to 50000), and drew teal splotches in Kokiri Forest's fog on AMD and NVIDIA.

Each pool-bound image the GPU writes marks the pool-bound images of another layout that overlap it; one read while
marked is dropped and comes back with memory of its own from then on, so it keeps what it last drew (the read that
found it gets an empty image once). NX2NAVI_TEX_CLOBBER=0 keeps such images in pool memory.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 16:22:16 +01:00