The launcher asked for 31 GB where the build's own check now asks for about 34, so a disk between the two passed the first check and was refused seconds later. Both say 34 GB now. The build no longer asks for the whole shader preparation's space when the game folder already holds translations. The texts said 10 to 25 minutes for an install that took players 27 to 41, and 5 GB for a build cache that measures 1.6. A build error's message goes into the launcher's log as one line.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Every selection of the Updates row started a request to GitHub, which
allows an address 60 an hour: a player who selected it 25 times in 90
seconds had every check of the next hour refused. The row and F5 now
start no check within a minute of the last one.
A refused check said "try again in an hour" whatever the answer held. It
now names the time from the answer's X-RateLimit-Reset or Retry-After.
A failed check wrote two tracebacks, 22 lines, into launcher.log each
time; a FeedError is now one line with its message and its cause.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game exits with 70 after a FATAL line of its own and with 71 after
its crash report, and the launcher said only that the line near the end
of the game's log names the error. It now reads the last FATAL line of
the run from logs\nx2navi.log and puts it into the home screen's message
and into launcher.log, so a launcher log a player sends says what the
error was.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The check printed its counts into the build's lines only, so a player
whose build ended with "4 damaged, 3 given a stand-in, 1 left as they
are" saw nothing of it. A job now reads romfs-check.json after the build:
the count goes into the step's row, and when the check ran in that job, a
sentence goes onto the home screen and into launcher.log.
The same four files are flagged on every copy of the game, and three of
them get a stand-in. For those the sentence says so and that nothing
needs doing; other files are counted and romfs-check.json is named.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The Updates row promised that an update rebuilds the game "in a few
minutes". The code cannot keep that: a version that changes the lifter
compiles the game's code again, and one that changes what the shaders are
built with builds all of them into the driver's cache again. Players'
updates took 24, 34 and 45 minutes. The row now says it takes a few
minutes when little changed and half an hour or more otherwise.
The warm-up of the driver's cache after an update only builds, but its
count was drawn in the second half of the bar as in a full preparation,
so a 20 minute run read 50 % in its first second. Its count now fills the
whole bar, and the row says so while the shader cache is packed before it.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A RomFS step that was cut short (Cancel, a full disk, a power cut) leaves
romfs.bin.part, up to 26 GB. The next run writes the image anew, but
make_game.py's step_romfs and the launcher's Begin Installation measured
the free space first, with that file counted as used: on a nearly full
disk the retry was refused although it needs no more room than the first
try. Both remove the file before they measure, and the first-run screen
counts its size as free.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
An update whose lift ran again drops the compile step's record before the
compile runs, so a compile that then stopped left state.json without it,
build.built_version said '' and the launcher's next start showed the
first-run screen and asked for the dump. build.installed now also counts a
folder that holds the exe of the build before and game files a rebuild can
start from: the window opens on home, where Rebuild the Game reads "Not
Finished" and Play says which build it starts, and an update's rebuild and
the command line's go on with the game. Begin Installation into a folder
whose game files are already unpacked builds on from them instead of
reading the dump again.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A game that stops before its first save is the one its player most wants to report, and Export Save refused it: "the game has no save yet". With Add Log and Settings on (the default) the launcher now writes NX2navi-log-<date>_<time>-bug-report.zip with the game's latest log, nx2navi.ini and a manifest that counts no save files, and says so on the Saves screen. Without a log there is still nothing to export, an export without the log and settings still needs a save, no account is made for the export, and an import refuses such a zip as one without a save.
This is the first of the two faults pull request #364 names, written anew inside the existing export; its Export Diagnostics screen and its separate crash log are not taken.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The new row, Add to Steam (Windows), puts a non-Steam shortcut named "The Legend of Zelda Ocarina of Time" into the shortcuts.vdf of every Steam account that signed in on the PC (launcher/steam.py): the binary key-value file is read and written back as it was, with ours added or updated in place, and the file from before the first change kept beside it. Steam reads that file only at its start and writes it back when it closes, so a running Steam is asked to close (-shutdown) and started again after.
The pictures come from the player's game when the row is selected (launcher/gameart.py), as the launcher's fonts and sounds do: Navi from the HUD's icon and its glow, the logo with the Master Sword and the Hylian Shield from the title screen's texture archive (decoded with runtime/tex_astc.c, built into a library with the toolchain's clang), and a frame 12 seconds into the first title movie, the field under the full moon, decoded from its AV1 with the toolchain's dav1d.exe, as the background, the cover and the wide tile. They go into config/grid named by the shortcut's id, CRC-32 of Exe and AppName with the top bit set, which matches the id Steam gave an existing shortcut on the test PC.
Steam starts the launcher's pythonw.exe on data/steam_play.pyw, which runs the launcher of app/current.txt with the new --play: the game starts from its folder with its console hidden, as Play starts it, and the process waits for it and for the copies its own Restart starts, so Steam counts the game as running while it is. ocarina.exe is a console program, so starting it directly would open a console window beside the game, and NX2navi.exe ends six seconds after it started the launcher. Started that way on an RX 7900 XT PC, the game ran, the Python process stayed until the game was closed and ended with code 0. Tested against copies of that PC's Steam files; the real Steam library is not changed until the player selects the row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A font file registered with Windows stays open, so writing it failed with Permission denied. When the cached title font was registered but its family could not be used, every start tried to decode it again, failed on the locked file and kept the system font. The registration is now given up before the fonts are decoded again, and an unchanged file is not rewritten.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The six schemes were named after places in the game. They are now Forest, Volcano, Lake, Desert, Temple and Shadow, in the same order and colours, and their ids in launcher.json follow (forest is the default). A launcher.json that names one of the old ids gets the default scheme, as with any name it does not know.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new launcher.json starts with sounds at low instead of off, and a value the file cannot hold falls back to low too (launcher/ui/sound.py DEFAULT_LEVEL). The player can still pick Off, Medium or High in Customize Launcher. The sounds are still only the game's select and back sounds, read from the player's own game.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The cursor's sound played at every move of the pointer and cut the other two short, as one sound plays at a time: it is gone, and moving the cursor is silent. A choice, a changed switch, Play and the end of a build play the game's decide sound; going back and a failure play its cancel sound. The chimes the launcher made from sine tones are removed too, so every sound it plays is decoded from the player's own game into data/cache/sounds and it is silent until the game has been read. No sound file is in the repository, the release or the setup.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The launcher's sound effects were chimes made from sine tones. They are now the game's interface sounds, the ones its menus make for the cursor, a choice and going back: SE_Sys_Cursor00, SE_Sys_Do00 and SE_Sys_Cancel00, the files the in-game menu plays. The launcher decodes them from the player's built game or dump into data/cache/sounds (gamefiles.extract_sounds, a BWAV reader for PCM16 and DSP-ADPCM), beside the font it already reads that way, so no sound ships. The chimes stand in until the game has been read. The cursor's sound is a little under the others, as in the game's menu, and is left out for a quarter of a second after a choice, since one sound plays at a time and the pointer landing on a row of the next screen would cut the choice's sound short. Sounds stay off until the player picks a loudness.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The launcher's home screen has a Customize Launcher row. Color Scheme steps through six schemes (Kokiri Forest, the colours so far, Death Mountain, Zora's Domain, Gerudo Valley, Temple of Time and Shadow Temple): each is the first scheme with its woods, accents, backdrop and glow turned to other hues, so all keep the same light and dark steps and the same text. Background takes a picture file, cuts it to the window's shape and keeps a fitted copy in data/background.npy; Background Dimming darkens it and the panels turn a little see-through over it. Animations (on by default) make the cursor glide between rows, a new screen slide in, sparks drift over the backdrop and Navi bob in the title band; they move by the time that passed and stand still while the window is hidden. Sounds are short chimes made from sine tones, off until the player picks a loudness.
Redrawing in another scheme takes about a third of a second: the blurred masks and the noise, which no colour changes, are kept, and compositing onto a solid picture is a plain mix.
The selftest's screen capture passed window handles as plain ints, which failed for a handle above 2^31 and left some screens without their picture; its calls are typed now.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
This brings in the test branch up to the shader reads, not the texture eviction by disuse still in progress there:
- black frames: a released or taken-back texture keeps its content, and a new texture over a live one of another size gets the region both cover;
- the menu font atlas uploaded through the runtime's checked upload batch;
- the game held to 240 frames a second, which stops the quick menu's crash;
- the FSR 3.1 contexts evicted instead of turning FSR off after a few render scales;
- AMD frame generation kept off while NVIDIA's holds the device;
- less device memory held that only costs the system's commit;
- shaders read from the disk cache off the render thread past a small budget;
- the exit code 70 text;
- pull requests #260, #261, #270 and #271.
The tool lists in make_kit.py and make_launcher.py and the setting names in cfg.c take both sides: romfs_check.py and pack_shader_cache.py, FOG_CULL, SCENE_SHARE and GPA_TWIN_MAX_KB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A dump can hold files whose first pages are zeros, with a container checksum that passes because the damage was packed along with them. The game then opens such a file over and over and gives up on whatever needs it: one damaged normal map left the Great Fairy Fountain without walls.
The game build's new last step, tools/romfs_check.py, decompresses every file of the game data once, in worker threads and never while the game runs, and writes romfs-check.json beside the game. A damaged texture gets a stand-in, an undamaged texture of the same kind renamed to it, in an ordinary mod folder the Mods menu can turn off, so the game can load what needs it. Other damaged files are reported, since only a clean dump restores them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The launcher's home has a Saves screen: Export Save writes NX2navi-save-<date>_<time>.zip into Downloads (or a chosen folder) with a manifest, the save the game would load next and, for a bug report, the game's latest log and nx2navi.ini, never a key file; Import a Save checks a zip's manifest, game, paths and CRCs, backs the current save up into the saves folder and replaces it while the game is not running. The game's Game tab has the same exports and an import that waits in profile/save-import and becomes the save at the next start, since the running game would write its progress back over a save replaced under it.
The zip code (runtime/save_zip.c) and the import at start are checked without game files by tests/save_zip_check.py and tests/save_share_check.py; the launcher side by its test suite.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The launcher told players that code 70 meant the game could not start itself again. The game exits with 70 after any
FATAL line of its own (runtime/dispatch.c rt_fatal), most often an allocation that failed when the memory ran out;
a failed re-run of itself (plat_reexec) is the rare case. A 0.6.1 player on a 16 GB laptop got the old text three
times, which pointed away from the log line that says what happened.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The last-chance exception filter is set at the start, before the GPU driver and the other DLLs load. A DLL that sets
its own filter later takes its place, and a fault in that DLL then ends the game with no FATAL line in the log. Two
0.6.0 logs from an RX 7800 XT end that way on the title screen. Once a second the filter is now put back and the
module that replaced it is logged (NX2NAVI_CRASH_FILTER_GUARD, default 1). When the game ends with a nonzero code,
the launcher adds that code, in hex with its meaning, to the end of logs\nx2navi.log, so a fail-fast exit that no
handler in the process can see still shows in the log a player sends.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A check that finds a newer release (at start, then hourly while the launcher runs, also hidden during play) stages
it on a background-priority thread: the app into app/<version>, a new Python into app/<version>/python.staged rather
than python.next (which the stub would swap in under the running version), and staged.json written last to mark it
complete. Nothing is switched and nothing restarts. A failed staging is logged and tried again after the next check.
The staged release installs, through the existing switch, restart and ContinueUpdateJob path, when the launcher
starts and right after the game exits, never while a copy of the game runs. Install Updates Automatically (on by
default) can leave it to the Updates row instead. A version the stub rolled back from is not staged or installed by
itself again, prune keeps a staged release, and the Settings rows now fit the window with the new toggle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game's Restart ends the process the launcher started and starts another. The launcher took that for the game ending: it came back over the game and forgot a game was running, so its Play could start a second copy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
From the local fixes package (fix 11), measured in Kokiri Forest at 4K on an RTX 4090 over PCIe 3.0: 40.5 to 62.6 fps
native and 45.6 to 74.9 fps with DLSS Quality, the mirror copies from 6.5 to 0.3 ms of GPU time a frame.
- Pages a VRAM mirror wrote back into guest memory are not copied up into it again: the mirror sync reads page stamps
of their own that a mirror's write-back leaves alone (vk_gpu_written_back, decided at record time by
vk_mem_mirrored). This replaces the lookup table NX2NAVI_WB_NO_REUP had, keeps its name, and is now on by default.
- The game's flushes of mirrored memory are not copied where the write watch covers the region, as every page the game
wrote there is stamped already (47-57 MiB a frame); NX2NAVI_FLUSH_UPLOAD=1 copies them as before.
- Written storage ranges up to NX2NAVI_WB_MERGE_MAX (now 32 MiB) are merged in 4 MiB pieces, so a range is no longer
bound to what one dispatch covers; the snapshot pool keeps its budget-scaled size with 128 slots.
- A submission's first part goes to the GPU at the first pass boundary while the GPU is idle (split_idle), long passes
are split too (split_in_pass), and the part's time limit reads the clock less often.
- A render target that needs an image of its own takes the image of a released one with the same parameters, released
two or more frames before (tex_reuse); memory requirements are kept per parameter set; a released entry another
descriptor's entry replaced at its address is kept and taken back.
- The memory check reads a page's write-watch bit and stamp under the lock that keeps them together.
- The launcher reads the gamepad only while its own window is in front, and does not start a second copy of the game.
- make_game.py says why a Python package did not load, not only that it is missing.
The fix's per-pass GPU timing is left out: NX2NAVI_GPU_PASSES does the same in main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The commit census of the perf trace walked the address space on the presenting thread outside mem_census, which
brought back the hitch mem_census was added to remove; it now runs only with mem_census = 1. DLSS's output pass at
the mode's share fell back to no pass at all when the scene was not at that share (the first presents, a dynamic
resolution step): after such a frame the first pass wider than the scene is taken again for 120 frames. The launcher's
nx2navi.ini editor no longer rewrites a file it cannot read, keeps the byte order mark and bytes that are not UTF-8,
reads an empty line as the game does, and leaves no temporary file behind. The build kit carries the two modules
build_game.py imports on Linux, the Linux steps list the right packages and Python, and stale comments and notes are
corrected (Discord on by default, two prebuild threads, Enhanced HDR gone).
DLSS Frame Generation needs nx2navi_dlssg.dll, NVIDIA Streamline's runtime and nvngx_dlssg.dll beside the game, which
no release carried, so the menu offered it and the game turned it off. tools/make_launcher.py --dlssg and --streamline
put them with their licences and a notice in the release's bin/dlssg/, and tools/make_game.py place_dlssg copies the
whole set beside the game. THIRD_PARTY_NOTICES.md has the row; the notes and README say RTX 40 and 50.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
It talks only to a Discord client running on the same PC and does nothing without one; discord_rpc = 0, the Game tab
of the settings menu or the launcher's Discord Status row turns it off. The launcher's row reads an empty or missing
value as on, as the game does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The presence is off by default and its only switch was a row of the settings menu's Menu tab, which the Ocarina menu
left out, so it could be turned on only by editing nx2navi.ini. The row is in the Game tab now, and the launcher's
Settings has a Discord Status row that writes discord_rpc to the game's nx2navi.ini (launcher/gameini.py, which
reads the file as runtime/cfg.c does and changes only the line it sets). The connection itself works: the installed
game's --probe-discord connects and sets the status.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
make_launcher.py and make_kit.py take --prompt-art (folders holding XGamepad, P5Gamepad and Keyboard_Mouse, or those
folders) and copy only the pictures pad_prompts.py reads into the release's prompt-art folder; tools/prompt_art.py
holds the art tables and that list, with no imaging packages. make_game.py's new last step, prompts, runs
pad_prompts.py on that art into the game folder's romfs-patches-* folders. Its key names everything it reads (the
RomFS, the art, the tools, the bind_ lines of nx2navi.ini, the folders being there), so it runs again only when one of
those changed, and it makes no other step run. A kit without art skips it. The launcher's Python gets fonttools and
pillow, and its jobs show a Draw the Button Prompts row when the version has art.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A slot folder holds only progress.sav and caption.sav, and Import Saves took those two files for a whole save: it replaced the save and left them at its top, where the game does not read them, so the game started a new one. A folder with progress.sav at its top now replaces that slot alone. A backup made by the import no longer brings its save-tx folder back with it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The step sat at 0 % until it was done, an hour on some PCs, because nothing it ran reported progress to the launcher. nx2navi.exe --prepare-shaders now prints how many shaders it has translated and how many it has built into the driver's cache every 2 s. make_game.py reads them as they come and fills the bar, the translation the first half and the build the second, with the counts in the step's text. An event every 10 s keeps the text current while nothing is printed, and after 3 minutes without a count moving it says so, and that the step is still running.
The selftest draws the step as a tenth screen. Its made-up update was version 0.3.11, so from 0.4.0 on the update-ready screen showed Up to Date and was no longer drawn; it is now a minor version past the launcher running it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BSHQpLnScF9sNv4LNAaaS3
When a new version did not start, the stub started the previous one with --rolled-back and the same arguments,
--continue-update among them: the previous version then ran the update's rebuild as if it were the new one, and the
"Version X did not start" notice on home never showed. A rolled-back start now goes to home with the notice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Import Saves: the saves folder picked in the dialog imports what waits in it (it had made the folder's README the
save); the save backed up is the one the game would load, in runtime/fs_host.c save_recover's order, so an interrupted
commit's only copy is kept, and the rest of the commit journal moves into the backup instead of being deleted; the
imported save goes into place before the old one is deleted, which comes back if that fails; another NX2navi install's
finished commit counts as its save. Tests cover each.
Quit waits while the game writes a save, as Restart does: the game runs on under the menu, and closing the window
finishes only a commit that has begun. The VSync row says "in use: Immediate" when VSync On falls back to tearing, and
its default follows the device profile (cfg_default). Without the game's textures the menu's divider is a plain line
and diamond of its own, not a tracing of the game's ornament.
make_game.py: the compile key holds the processor's features (cpu_tag), so a game folder moved to a PC without AVX2
compiles again instead of crashing; the main thread gets 16 MiB of stack with GNU ld too; any error waits for the
RomFS image, so its .part file is not cut short. The launcher tests use a neutral title id; tools/menu_preview.cpp
has cfg_default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In-game menu: the settings window, its tabs, rows, buttons and cursor, the performance overlay and the Preparing
shaders box are drawn with the game's interface textures where the RomFS holds them (runtime/ui/menu_skin.cpp,
perf_panel.cpp; plain shapes until they are decoded). Restart joins Continue and Quit, each behind a confirmation;
VSync is an on/off switch; DLSS is listed only on NVIDIA GPUs; the menu sounds are quieter; Picture shape is gone and
the setting descriptions are shorter; edge cases of input, layout and fonts are fixed. tools/menu_preview.py draws the
menu without the game.
Launcher: Import Saves takes a save from the game folder's saves/ folder or one the player picks; downloads fall back
to Windows' own certificate check when Python's refuses a server; updates are faster; the title bar is drawn in the
window and Navi is every icon. tools/make_game.py builds with CLANG64's clang where the launcher installed it, packs
the RomFS beside the lift and the compile, takes a prebuilt runtime, and compiles the game's resources without cmd.exe,
so a user folder with a space in its name builds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NX2navi-Setup.exe installs the launcher into %LOCALAPPDATA%\Programs\NX2navi without administrator rights, with
shortcuts and an Apps entry. The launcher finds the player's .nup, downloads the build tools itself (the MSYS2 UCRT64
packages toolchain.lock.json pins, checked by sha256 and unpacked without pacman, and zbic from PyPI) and runs
tools/make_game.py, whose steps it shows with their progress. Its window follows the game's options menu: colours
sampled from it, the menu's filigree, the white glowing cursor, the Triforce in the title band and as the programs'
icon, and all text in the game's Cetra Display, decoded from the player's own dump. Mouse, keyboard and an XInput
pad drive it.
Updates come from GitHub releases (NX2navi-update.json): the new version is downloaded, checked and staged beside
the running one, the stub restarts into it and falls back to the previous version when it fails to start, and the
game is rebuilt without the dump. make_game.py now keys its exefs and romfs steps on the game files alone, has
--rebuild and --events, compiles only the files whose source, headers, flags or compiler changed, and replaces
ocarina.exe only once the new one links. tools/make_launcher.py builds the release on Windows or Linux.
Tested: tests/launcher_test.py (19 tests), the real toolchain download and install, and under Wine 11 the setup,
the stub, the window on the bundled Windows Python, an update from a local feed by clicking Updates, the rollback
of a version that fails to start, and the downloaded clang compiling and linking a program against the game's
libraries.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Merged onto the current port: make_game.py keeps the launcher's step keys, cached link and in-place swap, and its
own runtime manifest (windres), AMD's FidelityFX library and the shader preparation, which becomes a step of its own
("shaders") that the launcher shows in its install, rebuild and update jobs. make_launcher.py ships the shader tools
and, with --ffx, AMD's library.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>