The row writes scene_share = 1 with dlaa = 0, which the start already sized the render-target heap for; widescreen.c now
reads the share live, says when the heap needs a restart for it (the row's note and the Restart count), and logs the
scene size, the picture size and how the scene is scaled once the fixed share takes over and at each change. The
stand-in copies a scene of the picture's size texel for texel with a nearest sampler, and the performance overlay shows
Ocarina's real scene size instead of the other builds' placeholders. scene_share gets its settings row and its ini
text; the row's texts are in all four menu languages.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Auto gives half the physical cores less one, at most 6: 2 on 6 cores, 3 on 8 (the count measured best on an 8-core CPU), 5 on 12. Four cores or fewer get none, and so does AMD's Windows driver for RX 6000 and older, where a player's device was lost with workers on and the cause is not known. The menu's row lists Automatic first with the count it gives on this PC, and the log says how many were started and why.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The rows keep their plain names. Their descriptions now say what the number counts and that 0 turns the setting
off: 0 to 4 for replay_pipe, 0 to 64 in steps of 4 for replay_small.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The rows are now CPU helper threads, Helpers work ahead, Helpers take small jobs and Start next frame early, each
with a short description of what it does and what it gained. Helpers work ahead and Helpers take small jobs are
switches: on writes replay_pipe = 4 and replay_small = 16, the values measured best, and another value set in
nx2navi.ini shows as on and stays.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Low, the default, lets released textures go after the hold and frees what switched-off upscalers and SMAA hold; High
keeps both for the session. The row shows Low for any setting but high, the old balanced among them. The descriptions
in all four languages no longer promise simpler surfaces or missing objects, since the default no longer trades them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Worker groups in flight (replay_pipe), Small groups to one worker (replay_small) and Early frame end (tail_early)
sit under Replay workers. A row whose setting does nothing without another one is greyed out and says which it needs.
The example settings file and the draft release notes name the rows, and the notes gain the replay_pipe and
replay_small entry.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Balanced, the default, is what the earlier commits made the default. High keeps what DLSS, frame generation's
HUD-less picture, FSR 1 and SMAA made after they are switched off, as before them. Low also sets, for the keys the
player leaves unset: released textures keep at most 1 GiB (tex_released_mb), textures give way from 70% of the video
memory budget (tex_vram_pressure) and the shared pipeline list is built at first draw (pipe_seed_boot = 0). Unsampled
live textures are not dropped in any of them: that eviction left the ground see-through for good. The values come
after the device profile and the low-end mode (cfg.c VRAMLOW); the row is in the Screen tab under Texture detail and
takes effect after a restart. The architecture notes describe the new memory report lines.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the setting off the device is made exactly as before the mode existed, so the mode cannot change anything for a player who never turns it on. Turning it on in the menu then takes a restart, and the row says so; in a run that started with it on, changes still apply at once.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Off, On, and On with boost where the mode is NVIDIA's, in English, Russian, Brazilian Portuguese and Simplified
Chinese. The row is greyed out with the reason where the mode cannot run: a driver with neither extension, a run in
which DLSS frame generation brings its own low latency, and NVIDIA's while a frame generation presents the frames. A
mode the driver refused says so under the value.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The row switches rumble_hd and is greyed out, with a note of what it needs, while the gamepad in use is not a Switch
Pro Controller or Joy-Con. Its texts are in all four menu languages.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A start that finds the pipeline cache written by another device or driver has nothing built, and everything was
compiled beside the game: an 8-core integrated GPU drew fewer than 600 frames in its first 11 minutes. Such a start
now waits on the "Preparing shaders" screen, with counts, for every recorded pipeline, for the compute pipelines on
every core at normal priority, and, when a sample says the driver's own cache lacks the prepared stage libraries, for
all of them on every core. The memory gate still holds for the builds, and the library builds write the preparation's
journal while the start waits, so a variant the driver's compiler dies on is skipped from the next start on.
boot-warm-owed.txt beside the caches names the GPU and driver: a start closed during the warm is followed by one that
goes on with it, three at most, and "done" keeps later starts ordinary while the cache file still carries the earlier
driver's header. When the boot stops waiting (prewarm_wait_ms, or a minute without progress) the builders step down
to the background's thread counts and idle priority. prewarm_full = 0 turns the warm off.
With nothing in the driver's cache the probe took 425 s on an RTX 5090 with 16 CPU threads: 87 s for 5,775 recorded
pipelines, 19 s for 4,075 compute pipelines and 317 s for 42,231 prepared variants.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The Testing heading now shows on every game version, with the experimental Replay workers row first and the debug menu's toggle after it where the game version has the debug menu.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Players' games crashed with three workers on by default in 0.9.1 and 0.9.2: an RX 6700 XT lost its device after
about 18,000 frames, its last mark a compute dispatch of the replay, with an occlusion query slot found unavailable
after its fence just before. The cause is not known yet, so replay_workers is 0 again unless a player sets it. The new
Replay workers row (0 to 8, experimental) writes replay_workers and waits for a restart, as the other restart-only rows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On a card with mesh shaders and 8 GiB of video memory or more the Game tab's switch cannot turn the mode on; it stays usable while the mode is on, to turn it off again. A player with every setting at its highest had it on on a GeForce RTX 5090, where the mode moved the sun shadow map and the scene depth to memory of their own and the ground's shadow became a dark patch with straight edges that turned with the camera.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The settings had a tab of their own; they are rows of the Game tab now, listed under the switch once the mode is on after a restart, and the tab is gone. With the mode off every one of them reads as unset, whatever nx2navi.ini or the environment says, so nothing of the mode acts unless a player turned it on; the build reads guest_opt the same way. The notes describe that, and take the white edges in towns and the dropped textures from the known issues to the fixes.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The row sets low_end_gpu, read at start, and says what the mode turns on and that it was measured on one card; its text is there in the menu's four languages. The key is decided again once the settings file is read.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The camera kept its height (only ZR and ZL changed it) and rose whenever the closest surface in the lower part of the view came within about three metres, so flying up to a character, a rock or a wall sent it upwards. It now moves where it looks and nothing stops it, the ground included.
Ground avoidance is a checkbox in the debug menu's free camera section. With it on, the nine view distances read back from the lower view become points of the scene (from the view's angles and the camera's pitch), and only a column whose lowest surface rises by less than about 30 degrees counts as ground: the camera goes no lower than a metre above it. Steeper things, objects and walls, are left alone. The read-back runs only while the switch is on.
Tested on a village save, 4 m/s forward for 5 s and then ZL for 4 s: with avoidance off the camera ended 17.4 m lower, through the floor; with it on it ended 0.7 m lower and held there. Flown at Link with the first version of the ground test, its height did not change.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The heap limits were fixed at device creation, and only texture images looked at the budget. FidelityFX allocates
outside VMA (FSR 3.1 contexts, frame generation): 882 MiB of it with 4644 MiB of VMA's filled the 5526 MiB budget of
heap 0 while heap 2 had 1757 MiB free, and an upload submit failed with VK_ERROR_OUT_OF_DEVICE_MEMORY. vmaCreateImage,
vmaCreateBuffer and vmaAllocateMemory now go through vk_vma_budget.c, which leaves out a device-local heap whose
driver-reported use is within NX2NAVI_VRAM_RESERVE_MB (default 512) of its budget; a Lama patches row sets it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each emulated mesh draw ended the pass, ran its stages between four barriers and began the pass again: a pass of 20
emulated draws became 20 passes, and on an RX 580 6 to 7 ms of a frame's 30 ms of GPU time went to the gaps between
passes (gpu_passes in Kokiri Forest: 8.7-10 ms per frame outside the game's passes and dispatches, 6.3-7.7 ms of it in
273-306 gaps with barriers only; 71 emulated draws a frame, 36 of them indirect). Now the first emulated draw of a pass
ends the part there (vk_exec_split_now), so the pass begins a new part, and the stages of every emulated draw of that
pass, the indirect ones' ring entries included, go into the part's pre-pass command buffer (vk_sync_pre), which the
queue runs after the mirror prologue and before the part; the pass is not split again. NX2NAVI_MESH_EMU_BATCH=0 (Lama
patches: Mesh emulation before the pass) brings the split back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Released textures kept, top texture levels left out, hot pools in system memory, the heap limit, the upload batch
limit, the kept ASTC buffer, mesh emulation and its arena and task records (greyed where the GPU has mesh shaders),
the overwritten-texture fix, the vector index fix, -O2 game code, pass times and the frame dump key. Each key gets a
row in the settings table; make_game.py reads guest_opt from nx2navi.ini when the environment does not set it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Choosing one of them while a temporal upscaler was set turned the upscaler off, and the picture fell back to bilinear scaling. vk_aa.c no longer keeps the game's SMAA while DLSS or FSR runs. The chosen pass replaces the game's composition as without them: in the native modes after the upscaler, and in the scaling modes before it. In the menu, a choice leaves the upscaler and frame generation alone, and the row notes that the upscaler's TAA runs too. Picking DLSS or FSR under Upscaling keeps the Anti-aliasing choice. The TAA entry, listed while no temporal mode is set, now sets FSR 4 Native AA where FSR 4 runs instead of forcing FSR 3.1. The overlay gets an Anti-aliasing line under Upscaling, for example "TAA + SMAA (Ultra)".
Checked on an RX 7900 XT in Hyrule Field with FSR 4.1 Native AA and Quality, and with FSR 3.1. The log has "the game's SMAA replaced by" smaa, off and fxaa while FSR 4.1.2 upscales, and the pictures are right.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ocarina anti-aliases every frame with its own SMAA in three compute passes after the bloom composite. The new aa
setting (nx2navi.ini aa, the Screen tab's Anti-aliasing row) keeps that by default. off, fxaa and smaa leave out the
game's edge and weight passes and replace its composition with a pass of our own that writes the same square-rooted
RGB9E5 words into the scene target: a plain copy, an edge smoothing written here, or the SMAA reference implementation
with its area and search textures (MIT). taa is DLSS or FSR 3.1 at the scene's size, which the row sets through the
upscaler; while either runs, the game's SMAA stays whatever aa says. The game's passes are known by a hash of their
guest code. The shader build now also rebuilds a header when a file its source includes changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The HDR row lists Off, RenoDX (the game's picture tone mapped to the display, the one fixed look) and Native (the game's own HDR, taken up at the next start), with the peak, game and HUD whites under either.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HDR on is the game's scene through the observer-response mapper, anchored to the game's own mid grey and tone slope, with half of the hue bend of the game's clamp: the defaults the menu had. The tone mapper choice, the mid grey, the tone slope and its match, the hue clip, exposure, highlights, shadows, contrast, saturation, highlight saturation, blowout, flare, hue, grade and gamma are gone from the menu, the settings table and the example ini; a file that still sets them works as before, the keys read by nothing and logging nothing. The menu's HDR row is Off and On, with the peak, game and HUD whites under it. The game's own HDR is still there for a file that sets hdr = native, and the row lists it only then. The luminance mapper and its grading code, which no setting reaches any more, are removed from the tonemap library, and the support buffer carries one vec4 for it.
The dark tones of a dark scene sat far above black: the present showed the game's sRGB-encoded picture as that encode decodes, linear near black, while the game is graded for a display of gamma about 2.2, and since the observer-response mapper became the default the 2.2 correction ran with the luminance mapper only. A scene value of 0.003 came out at 0.29 nits at a white of 350 nits, where a 2.2 display shows the game at 0.015. The present now always shows the picture as a 2.2 display would, and the tonemap aims its peak lower by that correction's inverse, so the brightest light still reaches the display's peak; the same value comes out at 0.017 nits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Resolution row lists each picture height as the size of the game's shape at it (21:9: 2560 x 1080, 3440 x 1440, 4300 x 1800, ...; the window's own shape where the picture follows the window) and sets both the picture's height and the window outside fullscreen, which follows at once within the monitor; the picture's height takes effect after a restart as before, and Native leaves the window as it is. A build without the widescreen patch sets, which draws the game's own size, keeps the Window size row.
The Upscaling rows and the overlay name FSR 4 by the major and minor version of the provider the driver lists (AMD FSR 4.1 for 4.1.2), and AMD FSR 4 until the library was asked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A teleport without a start position, or with one the area does not list, put Link where nothing held him: in Kakariko Village he fell for good, and the game refuses events, teleports included, while Link is in the air. The game's list has an empty name in 45 areas, which the Teleport tab listed as a default start; those entries are left out, and such a request takes the area's first listed position. For a few seconds after arriving, Link falling 25 m below where he arrived is taken for a fall through the ground, and the area's next start position is asked for, up to three times.
The free camera's left stick moved it along its view, so a camera looking down flew into the ground, and below it the picture showed the void under the map, which looks like ground the game failed to draw. The stick now moves it level, only ZR and ZL change its height, and with DLSS, DLAA or FSR 3.1 or 4 on, nine of the view distances the upscaler's motion pass works out (vk_dlaa.c fcam_probe) come back each frame and the camera rises where the ground ahead or below is within a clearance that grows with its speed. Flown at 25 m/s two metres above Hyrule Field, it went over every hill.
For test runs, NX2NAVI_DBG_TEST gains route and routeto: Link is steered through points, or through the area's own start positions, from the way he moves, and sidesteps where he stops gaining ground. The start positions' coordinates are read from the same file as their names.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each upscaling mode made a context of its own (about 217 MiB of video memory for FSR 4 at 3440x1440, 50 to 70 ms each), up to six were kept beside FSR 3.1's, and three FSR 4 creations that failed in a row turned FSR 4 off for the run: the menu then showed FSR 3.1 and no longer listed FSR 4. A player's log had the third failure (error 3) right after stepping through the modes with ten contexts alive. A context now takes every render size up to its output size, which the API allows at each dispatch; a creation that fails frees every context not in use, FSR 3.1's idle ones too, and is tried again; FSR 3.1 serves the frames between tries two seconds apart; only four failures in a row turn FSR 4 off, and choosing it in the menu again tries it anew.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
No menu row sets coop_beta; it lives in nx2navi.ini under [coop] (NX2NAVI_COOP_BETA) and takes effect at once. Co-op
itself is unchanged: coop = 1 still runs a session with or without the tab. The notes and the co-op guide say how to
show the tab.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Brought onto the line with FSR 4, its frame generation and the debug menu. Where both sides had added to the same
place, both stay: the patch table keeps the pickup count and the free camera, the settings list keeps both sides'
names, the menu includes the co-op page and the debug menu, and the launcher builder takes the pipeline list and the
FSR 4 folder. Both sides had added the menu's typed-character event; one definition stays, with the window code that
passes characters outside the basic plane.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With it on, the game draws from a camera of the menu's instead of its own, in play and in cutscenes. The left stick moves it along its view and sideways, the right stick turns it, ZR and ZL raise and lower it, R makes it faster and L slower, and Link stands meanwhile; or the camera stays where it is and the pad plays the game.
It works inside the game's own camera update: a new patch site sends the instruction at which the frame's position, target and up vector are final to a host function, which replaces them for the camera that follows Link and the one the events direct, so the game draws, culls and loads detail for what the free camera sees. The camera of the interface's 3D models and the one the sound follows stay the game's. The set is off unless the menu switches it on. A teleport's arrival starts the free camera again from the game's view.
Tested in Hyrule Field with scripted stick input (turn, rise, strafe, with Link's position unchanged), with the pad playing while the camera stays, across a teleport to Kakariko Village, during the Kakariko arrival cutscene, and switched on by a click in the menu.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The Teleport tab lists every area of the game with its named start positions, read from the player's own game files: the warp songs' pads, both sides of the loading zones and the boss rooms among them. A click changes area the way the game's own doors do: during a short event of the game that only waits, the menu reserves the next area and start position in the game's data and asks the game's sequence for the change, so the area unloads and loads as in play, a first visit's cutscene plays and a boss room starts its fight.
The Cutscenes tab lists the game's event scripts by name and starts one through the game's event manager.
Tested from Hyrule Field to Kakariko Village, the Forest Temple, Kokiri Forest in the child's time, the bottom of Lake Hylia, Volvagia's room, and the pads of two warp songs, four of them in one run, with Link walking afterwards; the Kakariko arrival cutscene started by name.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With debug_menu = 1 (off by default; the Game tab has the switch) F9 opens a panel on the left edge in the
performance overlay's look, with the game in view beside it. ui/menu.cpp lays it out in the settings menu's place,
so its input and the game's blocked pad are the menu's own. Typed characters now reach the menu for its text fields.
Flags: the game's 11,292 on/off flags are read from its game data manager, and a click changes one through the
game's own function on the game's thread at its pad read (runtime/debug_tools.c dbg_tick), so the game applies it
at its next update as it does its own changes. The game knows a flag by the hash of its name only; the names shown
are found in the player's own event flow files, hashed and matched when the panel first opens (2,250 of them from
915 files in 0.2 s), and none is kept in the code. World: Link's position, and a speed factor from 0.05 to 8 that
multiplies the step the runtime gives the game each frame (measured 0.50 at 0.5x). Memory: a search of the heap
for a value of 1, 2 or 4 bytes or a float (about 2 s), narrowed by equals, changed, unchanged, went up or went
down, with a value to set at a place or to hold there every frame.
Tested through the window's own messages: F9 opened it, a click on a flag set that flag in the game, text typed
into the filter narrowed the list, and F9 closed it; a scripted run set and held a value and put it back.
Teleporting, a free camera and starting cutscenes are not in it: writing Link's position, or every copy of it in
the heap, moved him back within three frames, so they need the game's own warp, scene-change and event functions.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The row showed AMD FSR 3.1 alone, and the frame generation of AMD's FSR SDK 2.4 could only be set in nx2navi.ini.
It is now listed after AMD FSR 3.1 as "AMD FSR 4 library" with the version the library runs on the card (3.1.6 on
an RX 7900 XT, the machine-learned 4.x on a Radeon RX 9000), where its libraries are there and FSR 4 runs. Choosing
it sets fsr4_fg and, since it generates only beside FSR 4 upscaling, FSR 4 as the upscaler; choosing AMD FSR 3.1
clears fsr4_fg. The performance overlay names the one whose swapchain is in place. In a test run the row went from
AMD FSR 3.1 to the new choice, back and to it again, and the swapchain followed each time.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
runtime/vk_ffx4.cpp loads amd_fidelityfx_loader_vk.dll from beside the executable and asks it which upscaler
versions the device can run. Where a 4.x version is listed (Radeon RX 6000, RX 7000 and RX 9000 cards with AMD's
driver 26.10.1 or newer) the menu's Upscaling row gains AMD FSR 4 Native AA, Quality, Balanced, Performance and
Ultra Performance, and fsr4 = 1 runs it in FSR 3.1's place with the same inputs. Its contexts are made with that
version asked for by its id and the provider is asked afterwards which version it runs, so no other upscaler can
be shown under the name. When a context or a dispatch fails, FSR 3.1 makes the frame, and after three failures
FSR 4 is off for the run. Each upscaler starts its history anew on the frame after a change from one to the other.
The setting is off by default and the Linux build compiles stubs.
On an RX 7900 XT (driver 26.10.1, 3440x1440, HDR) the library runs FSR 4.1.2: a context takes 54 ms to make and
217 MiB of video memory. Standing in Hyrule Field: Quality 47.8 fps where FSR 3.1 gives 51.5, Native AA 41.4.
Screenshots of 601 consecutive frames standing, 801 during a camera sweep, 701 each in Kakariko and the
graveyard, and 1,301 across changes between FSR 3.1 and FSR 4, their modes and off show no flicker that FSR 3.1
does not have, and it runs together with FSR 3.1 frame generation.
The SDK's API headers are in runtime/third_party/ffx_sdk, unmodified, with the licence. tools/make_kit.py and
tools/make_launcher.py take AMD's two signed libraries with --ffx4, and tools/make_game.py copies them beside the
game when the kit has both.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
mouse_mode = direct is the default, but on 1.1.1 it did nothing: only the 1.4.3 patch table had the sites, so the mouse always went through the stick emulation, which gives no turn at slow mouse speeds and tops out at about 107 degrees a second. The 1.1.1 table now has the set mouse_direct (on by default): at main+0x37c45c, where the camera's input update holds the processed stick in s1 and s0, a host call performs the displaced store and adds the raw mouse counts to both, so the mouse meets no dead zone and no curve; at main+0x37c4f0 a second call clears the idle bit for an update the mouse moved in. The counts are divided by the frames the game steps per update and by the stick camera speed, so the same hand movement turns the same angle at every frame rate. The Controls tab gets the mouse mode and mouse sensitivity rows, and mouse_mode = stick or NX2NAVI_MOUSE_DIRECT_PATCH=0 gives the old behaviour.
Checked here: the generator lifts the 1.1.1 game with the two sites (it compares each site's original word), the lifted game compiles and links with the runtime, and tests/mouse_direct_check.py passes its 1.1.1 harness (register contract, displaced store and load, equal turn at every frame rate and stick speed, the reset pause, capture and mode). Not checked here: the game was not run, so aiming with the mouse was not tried, and the differential tests against Unicorn were not run because no Python on this PC has Unicorn. The contributor measured 0.0800 degrees per count on both axes in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit bb8fecfbe43517006eafd7be9c22e8dbe9601de7)
Without the other players drawn in the world, which are unfinished. No relay address is built in, and with co-op off nothing opens a socket. Built on Windows and tested against a relay on this PC only; two games in one room and any real network have not been tried.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The walk key (walk_key, walk_scale) works and the settings example says the Controls tab sets both, but the tab had no row for either: the row's function was left without a caller, and a player asked for a walk key because he could not find one. Walk key and Walk scale are back under the analog stick rows, with the texts that were already there, and the guide names the setting. The second half of the contributor's change, a toggle mode, is not taken: it is a new feature that nobody has pressed a key against on Windows.
Built; the rows were not looked at in the menu, since no game could be started.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 02fab940a1bb79d8867f5e764ee597ea8eb662e8)
Verified by runs in the audit: the Market's periodic stall (a pool slot was listed once per refresh pass instead of once; the list fell from 160,385 entries to at most 3,192 and no frame over 20 ms remained while standing), orderly exits delete the pipeline prebuild's running marker (left behind, the next start wrote a skip file and every later start skipped the prebuild), the log and crash report name an area a save asks for that the game does not have, and the menu atlas hash no longer overflows a signed multiply. The other fixes compile and pass the regression route but their faults were never reproduced: see AUDIT.md section 13 for each.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
This line logs every setting nx2navi.ini sets, and a bug report takes a copy of nx2navi.ini along: with co-op both would have carried a room's secret, the relay's address and the player's name to whoever reads the report, and the secret lets anyone into the room. One list (runtime/cfg_private.h: the room's secret, the offer number, the relay, the name, the key a maker removes, the menu's test hook) now serves the log's line, "Copy system info" and the report's copy of the file, in the game and in the launcher: such a key reads "(set, not shown)", every other byte of the file stays.
Also: the last leftovers of the restorations that were left out with the puppets (their settings prefix and section), main.c's byte order mark as it was, and two comments that cited files this tree does not have.
Checked: with a room, a relay and a name in nx2navi.ini the log's line shows all three as set and none of their values; the same text gives the same bytes through the game's scrub and the launcher's (a launcher test, and the C function built alone); the launcher tests, the co-op probe, the relay tests and the tab check pass.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Each player keeps their own game and save. One player makes a room, the others join it with its secret, and story flags and, by the room's rules, items, songs, quest items, small keys (a shared pool), rupees and ammunition reach every save. The layer is a host thread with one UDP socket to a relay the players run themselves (tools/coop_relay.py, Python's standard library only); the messages between the players are sealed with a key from the room's secret (XChaCha20-Poly1305, Monocypher 4.0.2 vendored with its licence and a row in THIRD_PARTY_NOTICES.md), every change is signed by the player who made it, a player accepts a room by its members' keys and the key of its rules, the save is copied to coop-backup before anything is applied, and values are set through the game's own routines between frames. The Co-op tab makes, joins, accepts, removes and leaves, and the menu takes typed text for the name, the relay and the secret. This is the contributor's pull request #518 on this line.
Nothing reaches the network while co-op is off: the socket is opened, and the relay's name looked up, only after co-op is on, a relay is set and a room is made or joined. There is no default relay.
Left out of the pull request: the other players drawn in the world (the "puppets") with the copied engine they need. They were unfinished, added two patch sites to the game's per-frame update that could not be put through the differential tests here, and their file helpers clashed with the ones this line already has. So no position is sent: the POS message's codec stays, nothing sends it.
Changed against the pull request:
- The menu's test hook drives the Co-op tab only when it comes from the environment. From nx2navi.ini it could turn co-op on, join a room and accept its offer.
- The log's label for a room is hashed from the secret instead of being its first three characters.
- A game that has not saved yet has no save to copy, and takes nothing from the room until it has saved once; that used to count as a copy made.
- A PING's token no longer carries the PC's uptime.
- On Windows the maker's key file and its folder get an access list with the player's account alone.
- The tests that link the platform layer get the socket library, and the save test a stand-in for the title screen's hook.
Checked on Windows, where the pull request had never been compiled: the runtime builds and links; --probe-coop passes (sockets on 127.0.0.1, the codec against its byte vectors, a fuzz of every parser, two sessions through a hostile mock relay, a relay restart, the sync engine); tests/coop_relay_test.py passes its 61 tests, with the probe through the real relay on 127.0.0.1 at 0 and 30 % loss; tests/coop_page_check.py passes and its deliberate fault fails 48 checks. Not checked: two games in one room (one game runs at a time here), any real network, the tab in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>