The review of the shared failure guard found that a thread parked in dispatch.c rt_ending_enter ended the process
with 71 after 30 s even when the first report was a FATAL (70, or 72 for a lost device), so a fatal error whose report
hung read as a crash to the launcher.
rt_ending_enter now takes the code its caller ends with: fatal_end passes its own, main.c crash_handler 71. The first
caller stores it next to ending_tid, and a waiting thread that gives up after 30 s ends the process with it. Before
the store the value is 71, as before.
Reproduced before the change with a one-off build of tests/fatal_exit_check.c given a fatal note that never returns
and a fault on another thread: the process ended with 71 after 30.5 s; with this change it ends with 70 after 30.5 s.
That case takes 30 s, so the matrix gets a static check instead: tests/fatal_exit_check.py holds rt_ending_enter to
storing the first caller's code and ending with it, fatal_end to passing its code, and crash_handler to its first
line `if (!rt_ending_enter(71)) plat_exit(71);`. fatal_exit_check and the compile check of every runtime file (a
header changed) pass, with no new -Wall warnings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The review of the RTSS thread change found that only main.c crash_handler skipped rtss_limit_restore on the "rtss"
thread. An rt_fatal on that thread while it holds rtss_limit.c's lock still called the restore from dispatch.c
fatal_end, whose trylocks then spent a second for nothing before the end went on. A-14 names fatal_end.
fatal_end now reads plat_thread_name and calls rtss_limit_restore only when the thread is not "rtss", as
crash_handler does.
Not reproduced in the game before the change. tests/fatal_exit_check.c's stand-in restore now says it ran, and a new
fatal_rtss mode calls rt_fatal on a thread spawned with the name "rtss": on the code before this change the restore
ran there (the check fails), now it does not, and the process still ends with 70 after the rumble stop. The other
cases check that the restore runs from any other thread. fatal_exit_check and the compile check of dispatch.c pass,
with no -Wall warnings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The review of the fatal summary change found that dispatch.c fatal_end called perf_summary_flush_try (ft_stop waits up
to 50 ms, then the summary and the stutter map are formatted) before rtss_limit_restore and rt_rumble_stop_bounded.
The lane's order for the failed ends, and A-6's for the orderly ones (gfx_present.c rt_exit_steps), puts what a kill
of the process must not lose first: RTSS's profile and the controller's rumble.
perf_summary_flush_try now runs after the restore and the bounded rumble stop, just before the stdio flushes and
plat_terminate. The summary's lines still reach the log: rt_log_sync ran at the start of fatal_end, so every later
line is written as it is made.
Not reproduced before the change (an order of steps). tests/fatal_exit_check.py checks statically that fatal_end
calls perf_summary_flush_try after rt_rumble_stop_bounded; the check fails on the code before this change and passes
after it, and the program's cases (fatal, fatal_rumble, crash_crash, fatal_crash, crash_fatal) pass. The compile
check of dispatch.c passes with no -Wall warnings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
dispatch.c fatal_end wrote only the profiler's samples, so a run that ended in a FATAL had no "frametime" or
stutter-map lines for its last period: the numbers that would show what the game was doing before it failed.
perf.c perf_summary_flush_try (weak in dispatch.c for builds without perf.c) runs after fs_save_crash_wait: ft_stop,
then the running period's "frametime: at a fatal error" lines and the stutter map. The failing thread may hold any
lock, so stutter_map.c gains stutter_report_as(tag, try_only), which only tries sm_lock and writes nothing when it is
taken (stutter_report keeps the blocking take); the back end's exit lines (gfx_exit_log) and the trace's segments
(seg_close) are left out, as they read state the failure may have left half made. The crash report keeps no summary:
its state may be damaged.
Not reproduced before the change (a missing diagnostic). tests/fatal_exit_check.py now wants the summary at
rt_fatal and checks statically that perf_summary_flush_try only tries the map's lock and leaves the back end out;
tests/stutter_hitch_check.c gets the trylock stand-in it needs. fatal_exit_check, stutter_hitch_check,
stutter_map_check and the compile checks of every runtime file pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
input_rumble_hd_stop ran only in the orderly ends, so a FATAL or a crash while a controller vibrated on HD rumble
left it buzzing: nothing renews or stops the value after the process is gone (input.c says so). It also took
hd_lock with a blocking lock while it only tried the other two.
dispatch.c rt_rumble_stop_bounded runs input_rumble_hd_stop (weak in dispatch.c, as fs_save_crash_wait is, for
builds without input.c) on a new "rumble stop" thread and waits at most 300 ms for it, never joining it: the stop
goes through SDL, which takes its own joystick lock, and a crash on SDL's thread while it held that lock would
otherwise keep the ending thread there and the process would never end. fatal_end and main.c crash_handler call
it right after rtss_limit_restore. input.c tries hd_lock 50 times 1 ms apart, as it does `lock` and sdl_lock, and
skips the stop when it is not taken.
Not reproduced before the change. tests/fatal_exit_check.py (now linking dispatch.c as its own unit: the stop runs
at a fatal error; a stop that hangs leaves the end at code 70 after 0.3 s; statically both failed ends call the
bounded stop after the RTSS restore), tests/rumble_hd_check.py and the compile checks pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The platform layer calls the crash handler on every thread that faults, without waiting for the others
(win32.c crash_veh, crash_filter), and main.c crash_handler ended any second entry with plat_exit(71) at once.
So a second fault during the first report cut it after its first lines, together with its wait for a save Commit
(fs_save_crash_wait) and RivaTuner's restore; the audit's probe showed it in 3 of 3 runs. fatal_end had no guard
at all and none shared with the crash report: a crash during a FATAL's end wrote a whole crash report whose
"FATAL: access violation" became the log's last FATAL line (the one the launcher shows) and replaced code 70 with
71, and a FATAL during a crash report cut it with code 70.
dispatch.c rt_ending_enter is the one guard for both ends: the first caller reports and ends the process; the
same thread again (a failure inside its own report) ends at once with its own code (crash_handler keeps
plat_exit(71), fatal_end plat_terminate(code)); another thread waits in 10 ms sleeps, logging nothing since it
may hold the log queue's lock, until the process ends, and after 30 s ends it with 71 should the first report
hang. fatal_end calls it first; crash_handler calls it in place of its own busy flag.
Reproduced before the change by tests/fatal_exit_check.py's new cases, which failed on the old guards: two
faults at once (report lines 2 and 3 missing), a fault during rt_fatal (a crash report after the FATAL) and
rt_fatal during a crash report (exit 70, the report cut). They pass now, with the earlier cases and the static
check that crash_handler starts with the shared guard; the compile checks pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
dispatch.c fatal_end and vk_device.c lost_wait_exit ended with _Exit, which in the C runtime is ExitProcess: it
stops the other threads wherever they are and then runs every library's DLL_PROCESS_DETACH on the ending thread
(the audit's probes show the exe's TLS callback getting it after _Exit and not after TerminateProcess). That is
the detach plat_exit already avoids, after NGX's faulted once at the end of a clean run. After a FATAL such a
fault would enter the crash handler and replace code 70 or 72 with a crash report and code 71; after a device
loss a driver detach that hangs would hold the process for good, since ExitProcess had stopped the watchdog too.
The new platform plat_terminate ends the process with the code and nothing else (no exit hook, no stream flush:
the failing paths have written their lines and flushed). fatal_end calls it after its existing log sync and
flushes. lost_wait_exit tells its watchdog (spawned with a non-NULL argument) from the threads that stop there:
after LOST_EXIT_MS the watchdog alone writes "vk: the end of the run did not finish in 10 s; ending it" through
rt_log_sync's bounded trylocks, and the others end 2 s later only should the watchdog not have started. Exit
codes stay 70 and 72.
Not reproduced before the change (no detach fault on a fatal path has been seen). tests/fatal_exit_check.py
(new: dispatch.c and the platform layer with a TLS callback; rt_fatal ends with 70, its FATAL line and no detach
call, which it showed with _Exit; and statically, no _Exit in runtime outside the platform layer, and both ends
call plat_terminate) and the compile checks pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>