A draw that waits for its pipeline used to build a library itself when every pool worker was busy (16 times in a cold
run, up to 77 ms; once in a warm run, 97 ms). Two workers now take only those jobs, wake on their own condition so a
pool job's signal always reaches a pool worker, and run the fast link too; the drawing thread only waits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Crashes: the render-target heap (HeapDef DynamicTextureAllocatorMem and its parent) grows with the widescreen
picture, so the pause menu no longer reads a null block at 5120x2160; texture uploads keep the game's memory mapped
while they copy it, so UnmapPhysicalMemory no longer pulls it away mid-copy; DLSS Frame Generation no longer crashes
in Streamline's set-up (physical devices and the window surface go through its proxies, its swapchain images are
counted first, resources are tagged per frame); a stale core-wait target is cleared before its thread is freed.
Freezes and races: a resize during a swapchain rebuild is kept, a failed frame generation swapchain is retried
instead of replaced by a plain one, three acquire timeouts in a row rebuild the swapchain, device waits take the
queue lock, a translator child that stops answering times out, an in-flight compute pipeline builds at normal
priority, a save Commit started before the window closes finishes and none starts after, a settings change just
before closing is saved, and a movie sample taken before a flush is dropped.
HDR: Enhanced HDR extends the game's own tonemap so highlights go above the picture's white (the hue slider,
which no longer applies, is gone from the menu); frame generation gets a HUD-less picture, the HDR flag and the HDR10
metadata under HDR too.
Memory: ASTC textures are encoded to BC3 unless the PC has 20 GiB of VRAM and 48 GiB of RAM, as Windows charges video
memory to the commit charge (a long session held 17 GiB of RGBA8 textures and 45.7 GiB of commit on a 32 GiB PC).
Shaders: the translator lowers spill-mode programs with more than eight uniform register groups in a wider spill
layout, and local loads and stores with a uniform-register address (36029 of the game's 36031 variants translate,
20 failed before).
The launcher release ships the shader tools and AMD's FidelityFX library (make_launcher.py --ffx); windres there gets
the toolchain on PATH.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A depth-compare read through a sampler whose compare is off now gets the slot's comparing sampler, as the Switch
compares there and only NVIDIA's driver did so on its own. Colour components a fragment shader does not write are
masked out, as Maxwell leaves them alone. Without mailbox presentation the swapchain takes relaxed FIFO, or
immediate, so a late frame no longer halves the frame rate. NX2NAVI_VK_NOOPT=1 builds pipelines without the
driver's optimiser, for a driver whose compiler fails on one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game used to start after at most 3 s of prewarm, so after a translator, GPU or driver change it met the rest of
its shaders in play and stalled on each one. It now waits for all of it: a warm start is ready in about half a second
and shows nothing, while a cold one shows a "Preparing shaders" screen in the menu's colours and the game's fonts, with
the shader and then the pipeline count and a bar. The shader and pipeline prewarm report their numbers every 100 ms.
The present path takes a frame without a game image for the screen. The RomFS opens on the first host-side read, so
the screen's fonts load before the guest's first file access. NX2NAVI_PREWARM_WAIT_MS now defaults to 0 (no cap). With
no progress for 60 s the game starts anyway and the prewarm finishes in the background.
Measured with an emptied cache: 2,988 shaders translated and 2,399 pipelines built in 9.4 s behind the screen, then
0 ms shader and pipeline waits in Kokiri Forest. Warm: the game starts 0.47 s after launch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each file that contains copied code names its copyright holder and license and points at THIRD_PARTY_NOTICES.md; zlib code keeps its full notice and the mark that it was altered. Comments and probe text only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Comments say what the code does and why, docs/maxwell.md keeps the Maxwell facts, and fetch_refs.sh clones only the checkout the build reads. Code is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ocarina steps its game by the clock (the same frame-numbered walk covers half the distance at 120 fps), so in a build
without the fps60 and realtime patch sets the pacer holds frames to the frame limit alone: any rate from 30 to 1000,
the monitor's rate, or unlimited (164 fps average in Kokiri Forest). The menu always shows the row, with 165, 240 and
Unlimited added. NX2NAVI_PACE_HZ sets the pacer's rate for tests.
A compute pipeline is compiled outside the pipeline lock, and one compile serves the replay and the boot prebuild
alike; the prebuild uses half the CPUs. The guest waits at most NX2NAVI_PREWARM_WAIT_MS (3000) for the boot prewarm,
which then goes on in the background (a cold start waited 9.8 s). NX2NAVI_TEST_PAD_AT attaches the test gamepad late
and presses it, to test a controller switched on in play.
README, docs/architecture.md, docs/controls.md and AGENTS.md describe the Ocarina build.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NVN2 compute banks get the dispatch's group counts in bytes 0-0xb, for direct and indirect dispatches; the fog pass
after the integration divided by them. Indirect mesh draws read NVN's {count, first} record as {x, y, z}, so y = 0
drew nothing: each now draws from a ring entry holding {count, 1, 1}, copied on the GPU before the draw. An empty set 1
no longer leaves set 0 pushed with 0 bytes. Compute stages with subgroup operations whose width is a whole number of
subgroups require full subgroups.
The texture pool refresh fell from 3.1-3.7 ms to 1.0 ms a frame in Kokiri Forest: slots with the same descriptor,
address generation and entry generation share one lookup (about 14,500 of 15,000 refills a frame), and registering a
texture and view identical to what the slot holds keeps its resolution. Under 20 GiB of VRAM, ASTC textures are
encoded to BC3 by default (Kokiri: 15.9 to 8.2 GiB, same GPU time). The pool log counts refills by cause and what
invalidates them; frame dumps write BC textures as raw blocks and print a storage buffer's backing span; a profile with
NX2NAVI_PROFILE_FRAMES is written when its window ends; the alpha test logs once that it is not applied.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A texture slot whose content the CPU writes now follows another image at its address only when that image differs in
swizzle alone or holds GPU-written content; Ocarina reuses freed glyph atlas memory for captions of another width, and
following the older image drew the Basic Controls screen's "Target" with the wrong row length. Mesh-shader pipelines
are built on the workers and recorded in pipeline-keys.bin (version 4 with the task stage; version 3 files are
converted) instead of stopping the frame for 0.26-0.51 s. The ASTC decoder reuses one scratch buffer per upload command
buffer, and CPU-provided textures up to 32 MiB are sub-allocated unless the driver requires dedicated memory, which
takes the scene-load frame from about 1.25 s to 0.7 s. The feedback scan looks only at bound texture slots instead of
the bindless pool arrays, per-draw knob lookups are cached and the texture address buckets grow to 65536, so Kokiri
Forest's replay falls from about 16 to 7-9 ms a frame and the forest holds 60 fps. A float clear of zero on an integer
image now clears instead of being skipped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The names are NX2NAVI, NX2navi or nx2navi: the settings prefix (NX2NAVI_*), the ini file
(nx2navi.ini), the shader translator (nx2navi_xlate), the Windows resources, the installer and the docs. The 8-byte
file magics keep their size (NX2NSANS, NX2NSPRG, NX2NSPRP, NX2NPKEY, NX2NRFS1), so caches and the RomFS index from
older builds are not read. cfg.c and the settings pages took the prefix length as 5; it now follows the prefix.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The NVN2 front end and the SM86 to Maxwell shader lowering (tools/xlate/AmpereLowering.cs, mesh and task stages,
bindless texture pools, BRX jump tables, the NVN2 compute c0 layout) with four translator patches (0017-0020) bring the
opening of the game to 58-60 fps on the Vulkan renderer.
This round fixes the haze: SM86 IPA is lowered as a plain Maxwell IPA.PASS (texture coordinates were corrected for
perspective twice); LDSM, TXD, both F2IP byte forms, HMMA, MOVM and HFMA2.RELU are lowered and spill mode has eight
uniform register groups; conditional rendering keeps the newest counter report per address and treats a report as
pending until its value is in guest memory, so occlusion tests and the depth clears around the depth copy behave; and
the upscaler stand-in decodes the post pass's sRGB picture before writing the linear target. Tensor-core programs keep
the stand-in unless NX2NAVI_NATIVE_TENSOR=1, because their lowering does not match the hardware yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>