The user asked for it: the mode no longer gains frame rate, and the mesh shader fallback covers the cards it was written for. Its switch in the settings menu's Game tab is gone with the rows under it, and so are their 57 text ids and strings.
low_end_gpu itself does nothing any more. It is still a known key, so an older nx2navi.ini gives no unknown-key warning, and while it is on the log says once that the mode was removed in 0.10.2. The preset that gave nine keys other defaults is gone, and so is the rule that read the mode's keys only while it was on: each of them (mesh_emulation, tex_clobber, foliage, vram_heap_limit, vram_reserve_mb, upload_batch_mb, mirror_stage, mirror_hot, submit_finish_gpu and the others) is an ordinary setting with the default of its row or of its reader, so a line a player wrote by hand keeps counting and a file with only the switch runs the game as it runs for everyone else. guest_opt in nx2navi.ini counts for the next rebuild without the switch too (tools/make_game.py).
The recorder thread read the switch itself: on an AMD card without mesh shaders the mode turned it on. It is off on every AMD card now unless vk_recorder = 1 is set.
nx2navi.ini.example lists the former mode's settings as single settings, the 0.10.2 notes have a Removed entry and name the foliage fix of the commit before this one, and the comments that said what the mode sets say so in the past tense. tests/cfg_parse_check has the new reading of the switch and of the keys without it; the test matrix is at 90 ok with the same two not ok as before (installer_test, worktree_test), and a clean build compiles 169 runtime files and links. Not run in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The low-end GPU mode sets mesh_emulation = 1, and on a card without mesh shaders the emulation then draws the game's task and mesh programs in place of the mesh fallback. On NVIDIA's cards without mesh shaders that ended the game at the first mesh draws of an area with an access violation inside the driver, at nvoglv64.dll+0x10cdffe on a GTX 1050 Ti and on a GTX 1070 (both 0.10.1), and a Titan X (Pascal) report names the same mode. The GTX 1050 Ti's owner set mesh_emulation = 0 and played on through the fallback with the rest of the mode on.
The decision (vk_mesh_path.h) takes the card's vendor: an NVIDIA card is drawn for as if the emulation were not asked for, and the boot line says so. The replay and the pipeline code read the decided path from the device context where each read the setting itself. tests/mesh_path_check.c has the new cases.
Not run in the game: no GTX 10 card here. mesh_path_check passes and every file that includes the changed headers compiles.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Four players of 0.10.1 could not start the game again after changing settings: "no usable Vulkan device", exit code 70, until nx2navi.ini was edited or removed by hand. One log shows the case: a laptop with an RTX 3050 and Intel Iris Xe graphics, framegen = dlss and gpu_index = 1, the Intel one. With frame generation on, the device is made through Streamline's interposer, which asks it for VK_NV_low_latency2 and failed with VK_ERROR_EXTENSION_NOT_PRESENT, and nothing else was tried.
A chosen card of another vendor now counts as not usable while the interposer is in use, so the best usable card is taken, as for a chosen card that is gone. Where the card in use is still not an NVIDIA one, or the interposer fails to make the device for another reason, the loader makes it and frame generation is off for the run: the log says why and the settings menu shows it as unavailable, as it does when Streamline's files are missing.
Not run: no PC here has two cards of different vendors. The changed files compile.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
0.10.2 was to turn replay_pipe = 4 and replay_small = 16 on by default. A tester measured those two with five replay workers against the defaults on an RTX 3090, standing at eight places in Hyrule Field and at Lake Hylia with the default run repeated (within 3 %): slower at four of them (50.1 instead of 58.1 fps at one) and level or at most 7 % faster at the other four. The user decided to leave both at 0. CPU helper threads stay Automatic and Start next frame early stays on, as 0.10.1 shipped them; the notes and nx2navi.ini.example say so.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
auto chose full from 8,192 MiB of video memory budget, which is the cards of 10 GiB, and went by the budget alone. Two reports on 0.10.1 say that is too much. A tester filled a 24 GiB card to the room of an 8 GiB one and toured eleven areas at 2560x1440: with full, the driver counted more than the card had (the textures and the free space the allocator's blocks keep, which the pressure check leaves out), memory went to system memory, and the tour ran at 29.6 fps with a 1% low of 11.4; with reduced, 42.8 and 36.4, and nothing spilled. And a handheld's integrated GPU reported a budget of 10,361 MiB, which is a share of its 16 GiB of system memory: auto chose full and the game ended when a save was loaded, until its player set reduced.
Full now starts at 10,240 MiB of budget, the cards of 12 GiB (one reported 11,313 MiB in a player's log), and an integrated GPU gets reduced at most by auto. The log line says so when it applies, the settings menu's automatic entry names the level as before, and a level the player set stays.
Not run in the game. The file compiles and the content check passes.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game draws a culled list of grass or leaves twice from one indirect record: into the depth target alone, then into the colour targets. On the mesh shader fallback each draw has compute modules and a pipeline of its own, made at its first draw, and the depth-only one is ready first. Drawn alone it left the list's depth in the scene with nothing drawn over it, so what lies behind failed the depth test there and the sky's colour showed through the ground in the shape of the grass for as long as the colour draw's pipeline built, which is seconds each on AMD's driver for Radeon RX 6000 and older, where the fallback is the default.
A colour draw skipped for its modules or pipeline now stamps its record's address with the present, and clears the stamp when it is drawn. The depth-only draw of a record stamped within the last two presents is skipped as well, counted like a draw whose own pipeline is building. A draw whose stages write memory is never held. mesh_fallback_hold = 0 draws the depth alone as before.
Not run: no card here takes the fallback by default, and the game is the user's to start. The changed file compiles and the settings table's check reports 0 problems.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Main gained three commits after 0.10.1's release commit: a render target that was drawn over gives its image to the next target of its size, such an image is handed on after 8 presents and freed after 32 while the card is past its pressure share, and 0.10.1 kept CPU helper threads on Automatic and Start next frame early on. The settings keep this line's defaults (Helpers work ahead 4, Helpers take small jobs 16), the comments that said both were off in 0.10.1 now say what 0.10.1 shipped, the texture log keeps both sides' counters, and 0.10.2's notes say which two defaults are new.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The release commit for 0.10.1 had turned both off by default (replay_workers = 0, tail_early = 0). They stay as 0.10.0 has them: replay_workers = auto, half the processor's physical cores less one (3 on 8 cores), and tail_early = 1. A player's session with all four Testing settings at 0 filled the video memory as before (bug capture 7: 15.5 GiB in use, 20.7 frames a second); what filled it were the images of moved render targets, which the two commits before this one fix.
runtime/cfg.c, runtime/ui/menu.cpp, runtime/vk_exec.c and nx2navi.ini.example are back as they were at 0.10.0. The notes of 0.10.1 lose the entry about the defaults and take the fix's entry from the draft for 0.10.2, which goes.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
At 3840x2160 the targets moved in 16 presents hold 3.1 GiB, which a 16 GiB card does not have beside the 10 GiB of a town. A mark reaches its entry within three frames of the draw (four read-back copies, one every four submissions), so eight presents without a stamp are enough there. The early drop waits four times that: at ten presents it took the images the reuse was about to hand on (7,301 dropped, 7,672 made, 5,226 reused in one run); at 32 the same run made 3,338 and reused 8,004.
The walk from the bug capture at 3840x2160 with the budget taken as 13.2 GiB, a 16 GiB card's: 10.9 to 11.4 GiB in use, at most 1.6 GiB of released targets, no image that could not be made and none in system memory. A player's log from such a card at that size had 12.2 GiB of released targets and 22.2 GiB in use at 2 frames a second. Without the budget, at 3416x1440: 10.0 to 10.7 GiB, as before this change.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game lays its render targets out anew in every frame with a linear allocator. A shadow map among them changes its size with the view (1141x1141 to 1917x1917 in Kokiri Forest, a texel or two a frame), and every target behind it then lies at a new address in each frame. The entries at the old addresses are marked overwritten and released, and their images are meant to go to the next textures of their parameters (create_tex). They did not: the game finalizes a moved target's texture object only when it needs the object again, until then the object's slot holds the entry, the pool stamps every GPU-owned entry a slot holds as used in each submission (pool_touch), and the slot names it (slot_names). By those two rules the image stayed, each frame made about a dozen new images, and the released ones waited 120 presents or more: 6.7 GiB at 3416x1440 and 12.2 GiB at 3840x2160 on top of the area's 10 GiB.
An overwritten entry is now judged by what drew with it or sampled it (samp_frame, sampled_lately) while the pool's marks tell what the shaders sample, in the image reuse and in drop_overwritten. A marked slot whose own entry is released stamps that entry too. The reuse looks at up to 1024 released entries of a parameter set instead of 128. Past the VRAM pressure's share of the budget by the driver's own figure, which counts the holes in VMA's blocks, overwritten entries nothing sampled go after 18 presents instead of 600.
Measured on an RX 7900 XT from a player's bug capture in Kokiri Forest (walking 28 m from the save, then laps, the game's own camera): 15.9 GiB of device memory in use before and 12.3 to 14.3 GiB on the laps, 6.9 GiB of it released targets, 6,970 images made and 645 reused; 9.7 to 10.6 GiB after, at most 2.2 GiB released, 3,609 made and 8,821 reused, no image that could not be made. With the budget taken as 12.5 GiB the early drop took 3,740 entries and the use stayed under 10.6 GiB.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>